TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) NAME TRANSLIT Program to transliterate texts in different character sets. The program converts input character codes (or sequences of codes) to a different set of output char- acter codes (or sequences of codes). Intended for transliteration to/from phonetic representation of foreign letters with Latin letters from/to special national codes used for these letters. It supports simple matches, character lists and flexible matches via regular expressions. The new transliteration schemes are easily added by creating simple transli- teration tables. Multiple character sets are supported for input and output. It does not yet support UNICODE, but some day it will. COPYRIGHT Copyright (c) 1993 Jan Labanowski and JKL Enterprises, Inc. You may distribute the Software only as a complete set of files. You may distribute the modified Software only if you retain the Copyright notice and you do not delete original code, data, documentation and associated files. The Software is copyrighted. You may not sell the software or incorporate it in the commercial product without written permission from Jan Labanowski or JKL Enterprises, Inc. You are allowed to charge for media and copying if you distri- bute the whole unaltered package. SYNOPSIS translit [ -i inpfile ][ -o outfile ][ -d ][ -t transtbl | transtbl ] OPTIONS -i inpfile inpfile is a name of input file to be transliterated. If "-i" is not specified, the input is taken from stan- dard input. -o outfile outfile is an output file, where the transliterated text is stored. If "-o" is not specified, the output is directed to the standard output. Program will not overwrite the existing file. If file exists, you need to delete it first. -d Some information on character codes read from transli- teration table file are sent to standard error ("stderr"). Useful when developing new transliteration tables. JKL Last change: 22-Jan-1997 1 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) -t transtbl transtbl is a transliteration table file which you want to use. The "-t" option may be omitted if the transtbl is specified as the last parameter on the command line. The program first tries to locate transtbl file in the current directory, and if not found, it searches the directory chosen at compilation/installation time in "paths.h". If no "transtbl" is given, the default file name specified in "paths.h" is taken. The compile/installation time defaults in "paths.h" for the search directory and the default file name can be overiden by setting environment variables: TRANSP and TRANSF, respectively (see below). ENVIRONMENT VARIABLES The default path to the directory holding transliteration tables can be overiden by setting environment variable TRANSP. The default name for the transliteration table can be overiden by setting TRANSF environment variable. However, when the transliteration file is given on the command line, it will overide the defaults and environment setting. Here are some examples of setting environment variables for dif- ferent operating systems: UN*X System If you are using csh (C-shell): setenv TRANSP /home/john/translit/ setenv TRANSF koi8-tex.rus If you are using sh (Bourne Shell): set TRANSP=/home/john/translit/ export TRANSP set TRANSF=koi8-tex.rus export TRANSF VAX-VMS System TRANSP:==SYS$USER:[JOHN.TRANSLIT] TRANSF:==KOI8-TEX.TBL PC-DOS or MS-DOS SET TRANSP=C:\JOHN\TRANSLIT\ SET TRANSF=KOI8-TEX.TBL Note that the directory path has to include concluding slashes, \ or /. EXAMPLES cat text.koi8 | translit koi8-tex.rus > text.tex in UN*X is equivalent to: translit -t koi8-tex.rus -o text.tex -i text.koi8 and converts file text.koi8 to file text.tex using transli- teration specified in the file koi8-tex.rus. JKL Last change: 22-Jan-1997 2 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) translit -i text.koi8 koi8-cl.rus displays the converted text from file text.koi8 on your ter- minal. The conversion table is koi8-cl.rus (KOI8 --> Library of Congress). translit -i text.alt -t alt-koi8.rus | translit -o text.tex -t koi8-tex.rus is essentially equivalent to the following two commands in UN*X or MS-DOS: translit -i text.alt -o junkfile -t alt-koi8.rus translit -i junkfile -o text.tex -t koi8-ltx.rus and converts the file in ALT character set to a LaTeX file for printing. translit -i russ.txt pho-koi8.rus | translit -o russ.tex koi8-ltx.rus converts file russ.txt from phonetic transliteration to LaTeX file russ.tex for printing. TRANSLITERATION TABLES The following transliteration files are available with the current distribution. Consult the comments in the individual files for details. koi8-tex.rus Conversion table which changes the file in KOI8 (8 bit character set used by RELCOM news service) to a Plain TeX file for printing with AMS WNCYR fonts. koi8-ltx.rus Conversion table which changes the file in KOI8 (8 bit character set used by RELCOM news service) to LaTeX file for printing with AMS WNCYR fonts. ltx-koi8.rus Conversion table for the LaTeX to KOI8 conversion. Note that it will not handle complicated cases, since LaTeX is a program, and only TeX can convert a LaTeX source to the characters. However, it should work OK for sim- ple cases of text only files, and may need some editing for complicated cases. k8-tavtt.rus Converts KOI8 to Bill Tavolga cyrttf truetype font map- ping. hex-text.rus Converts hexcodes to actual codes. Some e-mail programs convert characters with codes larger than 127 to JKL Last change: 22-Jan-1997 3 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) hexadecimal numbers like =AB, =9C, etc. This table converts hexadecimal numbers back to codes. alt-gos.rus This is a transliteration data file for converting from ALT (Bryabrins alternativnyj variant used in many popu- lar wordprocessors) to GOSTSCII 84 (approx. ISO-8859- 5?) alt-koi8.rus This is a transliteration data file for converting from ALT to KOI8. KOI8 is meant to be GOST 19768-74 (as used by RELCOM). gos-alt.rus This is a transliteration data file for converting GOSTSCII 84 (approx. ISO-8859-5?) to ALT (Bryabrins alternativnyj variant) gos-koi8.rus This is a transliteration data file for converting GOSTSCII 84 (approx. ISO-8859-5?) to KOI8 used by REL- COM KOI8 is meant to be GOST 19768-74 koi8-alt.rus This is a transliteration data file for converting from KOI8. KOI8 is meant to be GOST 19768-74, to ALT (Bryabrins alternativnyj variant) koi8-gos.rus This is a transliteration data file for converting from KOI8 (Relcom). KOI8 is meant to be GOST 19768-74, to GOSTSCII 84 (approx. ISO-8859-5) koi8-7.rus This file converts from KOI8 to KOI7. koi7-8.rus This file converts from KOI7 to KOI8. Before you attempt the conversion, you might need to perform a simple edit on your file. You MUST read the comments in koi7-8.rus before you attempt this conversion. koi7nl-8.rus This file assumes that there are only Russian letters (no Latin) in the input file. If you have Latin letters, and you inserted SHIFT-OUT/IN characters, use file koi7-8.rus. koi8-lc.rus This file converts KOI8 to the Library of Congress transliteration. Some extensions are added. JKL Last change: 22-Jan-1997 4 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) koi8-php.rus This file converts KOI8 to the Pokrovsky translitera- tion. php-koi8.rus This file converts from Pokrovsky transliteration to KOI8. koi8-phg.rus This file converts from KOI8 to GOST transliteration. phg-koi8.rus This file converts from GOST transliteration to KOI8. pho-koi8.rus This is a table which will convert from many "phonetic" transliteration schemes to KOI8. It is elaborate and it takes a lot of time to transliterate the file using this table. Some transliterations are hopeless and internally inconsistent (as humans...), so the results cannot be bug free. You might want to modify the file, if your transliteration patterns are different than those assumed in this file. You may also want to sim- plify this file if the phonetic transliteration you are converting is a sound one (most are not, e.g., they use e for je and e oborotnoye, ts for c and t-s, h for kha, i for i-kratkoe, etc.). INTRODUCTION If you do not intend to write your own transliteration tables, you may skip this description and go directly to the installation and copyright sections. However, you might want to read this material anyhow, to better understand the traps and complexities of transliteration. It is frequently necessary to transliterate text, i.e., to change one set of characters (or composite characters, phonemes, etc.) to another set. On computers, the transliteration operation consists of con- verting the input file in some character set to the output file in another character set. In the simplest case, the single characters are transli- terated, i.e, their codes are changed according to some transliteration table. This is called remapping and, assum- ing the one-to-one mapping, the task can be accomplished by a simple pseudo program: new_char_code = character_map[old_char_code]; JKL Last change: 22-Jan-1997 5 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) If the one-to-one correspondence does not exist (i.e., some codes may be present in one set, but do not have correspond- ing codes in another set), precise transliteration is not possible. In such cases there are 3 obvious possibilities: 1. skip characters which do not have counterparts, 2. retain unchanged codes of these characters, 3. convert the codes to multicharacter sequences. In some cases, the file can contain more than one character sets, e.g., the file can contain Latin characters (e.g. English text) and Cyrillic characters (e.g. Russian text). If the character codes assigned to characters in different sets do not overlap, this is still a simple mapping problem. This is a case with KOI8 or GOSTCII character tables for Russian, which reserve the lower 127 codes for standard ASCII codes (which include all Latin characters) and charac- ters with codes above 127 for Cyrillic letters. If character codes overlap, there is a SHIFT-OUT/SHIFT-IN technique in which the meaning of the character sequence is determined by an opening code (or sequence of characters codes). In this case, the meaning of the series of charac- ters is determined by the SHIFT-OUT character (or sequence) which precedes them. The SHIFT-IN character (or sequence) following the series of characters returns the "reader" to the default or previous status. To schemes are used: (char_set_1)(SHIFT-IN[1])(SHIFT-OUT[2])(char_set_2)... or (char_set_1)(SHIFT-OUT[2])(char_set_2)(SHIFT- OUT[1])char_set_1... Since computer keyboards, screens, printers, software, etc., are by necessity language specific (the most popular being ASCII), there is a problem of typing foreign language text which contains letters different than standard Latin alpha- bet. For this reason, many transliteration schemes use several Latin letters to represent a single letter of foreign alphabet, for example: zh is used to represent cyrillic letter zhe, \"o may be used to represent the o umlaut, etc. If there is one-to-one mapping of such sequences to another alphabet, it is also easy to process. However, it is neces- sary to substitute longest sequences first. For example, a frequently used transliteration for cyrillic letters: shch --- letter shcza 221 (decimal KOI8 code) sh --- letter sha 219 ch --- letter cze 222 c --- letter tse 195 h --- letter kha 200 a --- letter a 193 JKL Last change: 22-Jan-1997 6 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) Obviously, in this case, we should proceed first with con- verting all shch sequences to shcha letter, then two- character sh and ch, and then single character c and h. Generally, for the one-to-one transliteration, the longest sequences should be precessed first, and the order of conversion within sequences of the same length makes no difference. For example, converting the word "shchah" to KOI8 should proceed in a following way: shchah --> (221)ah, (221)ah --> (221)(193)h, (221)(193)h --> (221)(193)(200) There is a multitude of reasons why transliteration is done. I wrote this program having in mind the following ones: 1) to print cyrillic text using TeX/LaTeX and cyrillic fonts 2) to read KOI8 encoded messages from Russia on my ASCII terminal. However, I was trying to make it flexible to accommodate other uses. PROGRAM OPERATION The program converts the input file to an output file using transliteration rules from the transliteration rule file which you specify with option -t. Some examples of transli- teration rule files are enclosed. Before program can be used, the transliteration rules need to be specified. These are given as a file which consist of the following parts described below: 1) File format number (it is 1 at this moment) 2) Delimiters used to enclose a) simple strings, b) char- acter lists, c) regular expressions 3) Starting sequence for output 4) Ending sequence for output 5) Number of input "character sets" 6) SHIFT-OUT/SHIFT-IN sequences for each input character set 7) Number of output "character sets" 8) SHIFT-OUT/SHIFT-IN sequences for each output character set 9) Transliteration table GENERAL COMMENTS The transliteration rules file consists of comments and data. The comments may be included in the file as: a) line comments --- lines starting with ! or # character (# or ! must be in the first column of a line) are treated as comments and are not read in by the program. b) comments following all required entries on the line. They must be separated by at least one space from the last data entry on the line and need not start with any particular character. These comments cannot be used JKL Last change: 22-Jan-1997 7 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) within multiline sequences. The data entries consist of integer numbers and strings. The strings may represent: a) plain strings b) character lists c) regular expressions All strings which appear in the file, are processed through the "string processor", which allows entering unprintable characters as codes. The character code is specified as a backslash "\" followed by at least 2 digit(s) (i.e., \01 produces code=1, but \1 is passed unchanged). The following formats are supported: \0123 character of octal code 123 (when leading zero present) \123 character of decimal code 123 (when leading digit is not zero) \0o123 or \0O123 character of octal code 123 \0d123 or \0D123 character of decimal code 123 \0xA3 or \0XA3 or \0xa3 character of hexadecimal code A3 The allowed digits are 0-7 for octal codes, 0-9 for decimal codes and 0-F (and/or 0-f) for hexadecimal codes. In a situation when code has to be followed by a digit character, you need to enter the digit as a code. E.g., if you want character \0xA3 followed by a letter C, you need to specify letter C as a code (\0x43 or \103 or \0o103 or \0d67) and type the sequence as, e.g., \0xA3\103. Character resulting in a code 0 (zero) (e.g., \00) is special. It tells: "skip everything what follows me in this string". It does not make sense to use it, since you can always terminate the sequence with a delimiter. When you use an empty string as a matching sequence, remember that it does not match any- thing. If the line with entries is too long, you can break it between the fields. If the string is too long to fit a line, you can break it before any nonblank character by the \ (backslash) followed by white space (i.e., new lines, spaces, tabs, etc.). The \ and the following white space will be removed from the string by the string preprocessor. However, you are not allowed to break the individual charac- ter codes (and you probably would not do it ever for aestetic purposes). For example: "experi\ mental design" is equivalent to: "experimental design" while: "experimental\ JKL Last change: 22-Jan-1997 8 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) design" is equivalent to: "experimentaldesign" If you need to have \ followed by a space in your string, you need to enter either a backslash or a space following it as an explicit character code, for example: "\\0o40" will produce a \ followed by the space, while the string: "\ " will be empty. The preprocessor knows only about comments, plain charac- ters, character codes, and continuation lines. However, some characters and their combinations may have a special meaning in lists and regular expressions. DETAILS OF FILE STRUCTURE Ad.1) File format number. This is simply a digit 1 on a line by itself at the moment. This entry is included to allow future extensions of the transliteration description file without the need to modify older transliteration descrip- tions (program will read data according to the current file format number given in the file). Ad.2) String delimiters. The subsequent 3 lines specify pairs of single character delimiters for 3 types of text data. The line format is: opening_character closing_character. These are needed to mark the beginning/end and the type of the text data. Each string (text datum) is saved starting from the first character after opening delim- iter, and ends at the last character before the closing delimiter. If you need to use the closing delimiter within a string, you need to specify it as its code (e.g., if you are using () pair as delimiters, specify ")" as \0x29). The opening delimiter may be the same or different from the closing delimiter. a) The first line contains characters used to enclose (bracket) a plain string. Plain strings are directly matched to input data or directly sent to output. I suggest to stick to " " pair for plain strings. The ASCII code for " is \0d34 = \0x22 = \0o42 if you need it inside the string itself. b) The second line contains characters to mark the begin- ning and the end of the list. Lists are used to translate single character codes. I suggest [ and ] delimiters for the list (ASCII code of "]" is: \0d93 = JKL Last change: 22-Jan-1997 9 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) \0x5D = \0o135). The lists may include ranges, for example: [a-zA-Z0-9] will include all Latin letters (small and capital) and digits. Note that order is important: [a-d] is equivalent to [abcd], while [d-a] will result in an error. If you want to include "-" (minus) in the list, you need to place it as the first or the last character. There are only two special char- acters on the list, the "-" described above, and the "]" character. You need to enter the "]" as its code. E.g., for ASCII character table [*--] is equivalent to [*+,-], is equivalent to [\42\43\44\45]. The order of characters in the list does not matter unless the input list corresponds to the output list (this will be explained later). Empty lists do not make sense. c) The third line of delimiter specification contains delimiters for regular expressions and substitution expressions. These strings are used for "flexible" matches to the text in the input file. They are very similar to the ones used in UN*X for searching text in utilities like: grep, sed, vi, awk, etc., though only a subset of full UN*X regular expression syntax is used here. I suggest enclosing them within braces { and } (ASCII code for } is \0d125 = \0x7D = \0o175). Actu- ally, regular expressions can only be used for input sequences, and for output sequences the {} are used to enclose substitution sequences. This will be explained below. The description of the syntax for regular/substitution expressions is adapted from the documentation for the regexp package of Henry Spencer, University of Toronto --- this regular expression pack- age was incorporated, after minute modifications, into the program. REGULAR EXPRESSION SYNTAX A regular expression is zero or more branches, separated by `|'. It matches anything that matches one of the branches. The `|' simply means "or". A branch is zero or more pieces, concatenated. It matches a match for the first, followed by a match for the second, etc. A piece is an atom possibly followed by `*', `+', or `?'. An atom followed by `*' matches a sequence of 0 or more matches of the atom. An atom followed by `+' matches a sequence of 1 or more matches of the atom. An atom followed by `?' matches zero or one occurrences of atom. An atom is a regular expression in parentheses (matching a match for the regular expression), a range (see below), `.' (matching any single charac- ter), a `\' followed by a single character (matching JKL Last change: 22-Jan-1997 10 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) that character), or a single character with no other significance (matching that character). A range is a sequence of characters enclosed in `[]'. It normally matches any single character from the sequence. If the sequence begins with `^', it matches any single character not from the rest of the sequence. If two characters in the sequence are separated by `-', this is shorthand for the full list of ASCII characters between them (e.g. `[0-9]' matches any decimal digit). To include a literal `]' in the sequence, make it the first character (follow- ing a possible `^'). To include a literal `-', make it the first or last character. The regular expression can contains subexpressions which are enclosed in a () pair. These subexpressions are numbered 1 to 9 and can be nested. The numbering of subexpressions is given in the order of their opening parentheses "(". For exam- ple: (111)...(22(333)222(444)222)...(555) Note that expression 2 contains within itself expres- sions 3 and 4. These subexpressions can be referenced in the substitu- tion string which is described below in the paragraph below, or can be used to delimit atoms. Examples: {[\0d32\0d09]\0d10} --- will match space or tab fol- lowed by new line {[Tt][Ss]} --- will match TS, Ts, tS and ts {TS|Ts|tS|ts} --- same as above {[\0d09-\0d15 ][^hH][^uU][a-zA-Z]*[\0d09-\0d15 ]} --- all words which do not start with hu, Hu, hU, HU. There is a space between \0d15 and ]. Note that specifying expressions like {.*} (i.e., match all characters) does not make much sense, since it would mean here: match the whole input file. However, expressions like {A.*B} should be acceptable, since they match a pair of A and B, and everything in between them, e.g. for a string like: "This is Mr. Allen and this is Mr. Brown." this expression should match the string: "Allen and this is Mr. B". Remember to put a backslash "\" in front of the follow- ing characters: .[()|?+*\ if you want their literal meaning outside the range enclosed in []. Inside the range they have their literal meaning. If you know the syntax of UN*X regular expressions, please note that ^ and $ anchors are not supported and are treated as nor- mal characters (with the exception of ^ negation within []). SUBSTITUTION EXPRESSIONS After finding a match for a regular expression in the JKL Last change: 22-Jan-1997 11 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) input text, a substitution is made. It can be a simple substitution where the whole matching string is replaced by another string, or it may reuse a portion or the whole matching string. The subexpressions (the ones enclosed in parentheses) within the regular expression which matched the input text can be refer- enced in the substitution expression. Only the follow- ing characters have special meaning within substitution expression: & --- will put the whole matching string. \1 --- will put the match for the 1st subexpression in (). \2 --- will put the string which matched 2nd subex- pression, etc. \9 --- will place in a replacement string the 9th subexpression (provided that there was 9 () pairs in the regular expression) Only 9 subexpressions are allowed. All other charac- ters and sequences within the substitution expression will be placed in a substitution string as written. To be able to put a single backslash there, you need to put two of them. To be able to place the unchanged codes of the above characters (i.e., to make them literals), you need to precede them with a backslash "\", i.e., to get & in the output string you need to write it as \&. Similarly, to place literal \1, \2, etc., you need to enter it as \\1, \\2, etc. Note that characters .+[]()^, etc. which had a special meaning in the regular expressions, do not have any special mean- ing in the substitution expression and will be output as written. Example: The regular expression: {([Tt])([Ss])} and the corresponding substitution expression {\1.\2} puts a period between adjoining letters t and s preserving their letter case. The expression: {([A-Za-z]+)-[ \0x09]*([\0x0A-\0x0D]+)[ \0x09]*([A- Za-z,.?;:"\)'`!]+)[ \0x09]} and the substitution expression {\1\3\2} dehyphen- ate words (when you understand this one, you are a guru...). For example: con- (NL)cert is changed to concert(NL), where NL stands for New Line. It looks for one or more letters (saves them as sub- string 1) followed by a hyphen (which may be fol- lowed by zero or more spaces or tabs). The hyphen must be followed by a NewLine (ASCII characters 0A-0D hex form various new line sequences) and saves NewLine sequence as a subexpression 2. Then it looks for zero or more tabs and spaces (at the beginning of the line). Then it looks for the rest JKL Last change: 22-Jan-1997 12 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) of the hyphenated word and saves it as substring 3. The word may have punctuation attached. Then it looks again for some spaces or tabs. The substitu- tion expression junks all sequences which were not within (), i.e., hyphen and spaces/tabs and inserts only substrings but in a different order. The \1 (word beginning) is followed by \3 (word end) and followed by the NewLine --- \2. The {\2\1\3} would be probably equally good, though you would need to move the punctuation matching to the beginning of the regular expression. Ad.3) Starting sequence. This sequence will be sent to the output before any text. It is enclosed in the pair of string delimiters. I use it to output LaTeX preamble. However, it can be empty, if not used. The (sequence) may contain any characters, including new lines, etc. Example: "" # empty sequence Example: "\documentstyle{article} \input cyracc \begin{document} " is right (note a new line at the end), but "\documentstyle{article} \input cyracc # this comment will be included! \begin{document}" # while this will not is wrong. Ad.4) Ending sequence. Similar to 1), but will be appended at the end of the output file. For example: "\end{document} " Ad.5) Number of input character sets. For example, in some incarnation of KOI7, there are two character sets: Latin and Cyrillic. Cyrillic character sequence follows SHIFT- OUT character (CTRL-N), \0x0e, and is terminated by SHIFT-IN character (CTRL-O), \0x0f. Another way of look- ing at it is that Latin characters follow CTRL-O and cyrillic ones follow CTRL-N. If there is only one character set on input you should specify 0 as a number of input char sets, since the input file obviously does not contain any SHIFT-OUT/IN sequences. Ad.6) SHIFT-OUT/SHIFT-IN sequences for each input character set. These lines appear only if you specified nonzero number of character sets. These lines contain also JKL Last change: 22-Jan-1997 13 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) "nesting sequences", which will be explained later in this section. You do not use "nesting sequences" fre- quently, and let us assume for a moment that nesting data are empty strings. The strings or regular expressions specified here are matched with the contents of input text. If match was found, the matching sequence is usu- ally deleted from the input text and: a) for SHIFT-OUT sequence: the current input character set number is changed to the new one corresponding to the SHIFT-OUT sequence, or b) for SHIFT-IN sequence: the previous input character set number is restored, (i.e., the one which preceded the SHIFT-OUT sequence for the current set). Note that only the SHIFT-IN sequence for the current set is matched. The SHIFT-IN sequences for other charac- ter sets than the current set are not matched. The bracketing of sets is assumed perfect. If the SHIFT- IN sequence for the current set is an empty string, the input set number is changed when SHIFT-OUT sequence of the new set is detected. For each input character set, you have to specify a line consisting of 6 strings/expressions separated by spaces: SO-match SO-subs NEST-up NEST-down SI-match SI-subs where: SO-match --- the string or regular expression for the SHIFT-OUT sequence for the current character set. If detected, the input character set is changed to this set. SO-subs --- this is usually an empty string (i.e., the input sequence matching SO-match is removed). But it can be a replacement string or a substitution expres- sion, which will substitute the original matching SHIFT-OUT sequence. NEST-up --- this string (or a regular expression) is usu- ally an empty string). However, it can be used to count brackets for detection of SHIFT-IN bracket, if SHIFT-IN sequence is not unique. Its use is explained below. NEST-down --- a counterpart of NEST-up. It is explained later. SI-match --- when a sequence in an input file matches the string or regular expression given as SI-match for a current input character set, the input character set number is restored to the previous set. Note, that only SI-match for a current set is matched with input char- acters. SI-subs --- this is usually an empty string (i.e., input sequence which matched SI-match is removed), but if it is not, the input characters which matched the SI-match are replaced with the SI-subs. The KOI7 case described above may be specified as: 2 # 2 input sets JKL Last change: 22-Jan-1997 14 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) "" "" "" "" "" "" # Latin(set 1) "\016" "" "" "" "\017" "" # Cyrillic(set 2) or 2 # 2 sets "\017" "" "" "" "" "" # Latin(set 1) "\016" "" "" "" "" "" # Cyrillic(set 2) Before the input is processed, the program is initialized to the character set of the first set. In the above case, it is important, since declaration: 2 # 2 sets "\016" "" "" "" "" "" # Cyrillic(set 1) "\017" "" "" "" "" "" # Latin(set 2) would be wrong and would mess up the Latin characters preceding first Cyrillic sequence. The nesting sequences are used only for specific situa- tions. I needed them to write a transliteration table from LaTeX to KOI8. In LaTeX the { } pair is used for grouping and appears frequently in the text. The sequence of cyrillic characters is also a group in LaTeX. The SHIFT-OUT sequence for Russian letters in LaTeX is (at least in my case): "{\cyr ", and the end of the Russian letters is marked by "}", but the "}" has to be the bracket matching the opening "{" in "{\cyr ", not just any bracket. For this reason, my SHIFT-OUT/IN entry was in this case: "{\cyr " "" "{" "}" "}" "" # Cyrillic codes Whenever the "{\cyr " was found, the program zeroes the counter. It adds +1 to it, when NEST-up sequence (i.e., the "{" here) is found, and subtracts 1 from it, when the NEST-down sequence is found (i.e., the "}"). The check- ing for a SHIFT-IN sequence (i.e., the "}") for cyrillic set is done only when the counter value is zero (i.e., all pairs inside the cyrillic text are matched. In fact, the process is more complicated than that (the counter for an opened character set is placed on the stack), but these are details you can find in the code itself. What if the SHIFT-IN and SHIFT-OUT sequence is the same character? Starting from version 1.01 the TRANSLIT will also work in such cases. Let us assume that the SHIFT-IN and SHIFT-OUT sequence is a single character "%" which switches between two character sets. Also, if we want to use it in the text, we have to double it, i.e., "%%" will not be a SHIFT-IN/OUT sequence but will denote a literal percent sign. We can do it in the following way: "" "" "" "" "" "" # Latin letters {%([^%])} {\1} "" "" {%([^%])} {\1} # Cyrillic codes and later in the transliteration table (see below) we should put a line: 0 "%%" 0 "%" # change doubled % to JKL Last change: 22-Jan-1997 15 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) a single one The same effect, for identical SHIFT-IN/OUT sequences, can be accomplished with a -3 character set code and will be described below. Ad.7) Number of output "character sets". This is analogous to the input case. The characters sent to output may belong to different sets. For example, when the character (or the sequence) from set 2 is followed by the character (or the sequence) from set 1, the program first sends the SHIFT-IN sequence for set 2 (if it is not empty) and then the SHIFT-OUT sequence for set 1 (if it is not empty). If the output character (or sequence) is assigned to set 0, then no SHIFT-IN/SHIFT-OUT sequences are sent to output. If there is only one set of output characters, you should specify 0. Note that you may have several input sets and several output sets, though this is rare. Usually, you have one input set and many output character sets, or vice versa. Again, if you have only one output set, you do not have any SHIFT-IN/SHIFT-OUT sequences, since those are send to output only when a set number is changed. But you are free to experiment. Ad.8) SHIFT-OUT/SHIFT-IN sequences for each output character set. It is similar to the input case, however, the NEST- in and NEST-up sequences are not used here. Again, before any text is sent to output, the character set specified as the first one is assumed. If SHIFT-OUT/IN sequences are not used (i.e., you have only one output character set), you will not have any SHIFT-OUT/SHIFT-IN data lines. The KOI8 (single character set containing all Latin and Russian letters) to KOI7 (the set using over- lapping codes switched by SHIFT-OUT/IN sequences) conver- sion could be therefore accomplished by the following table: 2 # 2 output sets "" "" # Latin Letters "\016" "\017" # Russian Letters case Ad.9) Transliteration table for individual character or their sequences. It is a core of your transliteration data. There are 4 columns in the transliteration table: (inp_set_no) (inp_seq) (out_set_no) (out_seq) These 4 columns are separated by spaces. The (input_set_number) corresponds to the input character set number as specified above for input SHIFT-OUT/SHIFT-IN data, or zero. If zero is used (even if number of input sets is not zero), the (input_sequence) will be always matched, irrespectively of the current input character set imposed by the SHIFT-OUT sequence. This is useful, since some characters are universal (e.g., new lines, spaces, pluses, minuses, etc.) irrespectively of the JKL Last change: 22-Jan-1997 16 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) current character set. The (input_sequence) is the sequence of characters to be matched with characters in the input file, and if found (within the character set specified) it is replaced by the (output_sequence) and sent to output (i.e., the matching is interrupted, the (output_sequence) sent to ouput, the input file pointer is moved to the first character after the matched sequence and matching resumes). The (output_set_number) specifies the output character set. When the output char- acter set changes during transliteration, the appropriate SHIFT-IN sequence of the previous set and the current set's SHIFT-OUT sequence is sent to output. The (output_set_number) may also be zero (even if number of output sets is not zero). In this case, the current out- put set status is not changed, and no SHIFT-IN/OUT sequences is sent to output. Lastly, the output set code may be -1, -2 or -3. In this case, the substitution is performed within input string that matched but the output sequence is not sent to the output yet. Depending on the code, the following action is performed: -1 --- program makes the substitution in the input string (i.e., substitutes the matching string with the input string in the input buffer). It does not send the output sequence to the output, but continues matching input sequences following the currently matched one. -2 --- like code -1, but matching is resumed from the first sequence on the list. -3 --- like code -1, but matching is resumed from the input SHIFT-OUT/IN sequences. E.g., if the unprocessed text in the input file is: mental procedure was not successful since.......... and there was a line in transliteration table: 0 "me" -1 "you" the input text would be changed to: yountal procedure was not successful since.......... and all remaining matching data would be applied to this text, rather than original text. The -2 code backsteps to the point where the matching of transliteration starts. The -3 code backsteps even further, to the point where the input SHIFT-OUT and SHIFT-IN sequences are matched. Since the order of sequences to match is cru- cial here, for the case of output set code -1/-2/-3 even one-character input sequences are matched in the order specified. BE CAREFUL HERE. You may create infinite loops. If you use code -2/-3, be sure that the resulting sequence after substitution with the code -2/-3, will not match previous sequences with codes -2/-3. The (output_sequence) is a sequence which substitutes the corresponding (input_sequence). If (output_sequence) is "" (i.e., empty string) then (input_sequence) is effec- tively deleted. The (input_sequence)s are compared with JKL Last change: 22-Jan-1997 17 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) input in the order specified unless backstepping -2/-3 code is used (the matching is done from the first sequence again). I use the code -1 e.g., to dehyphenate words when changing to LaTeX. Code -2 is useful if you want to skip next comparisons, and the resulting substi- tution string will match earlier matching expressions. I do not see many uses for the code -3, but it can be used to resolve "toggle" SHIFT-IN/OUT sequence, as described in an example further below. The order for multicharac- ter sequences is therefore important (the single charac- ter sequences are always compared after all multicharac- ter sequences, and can be therefore put anywhere). The longer multicharacter sequences should be specified before shorter ones, unless they are some "preprocessing" steps with codes -1/-2/-3. The order may sometimes be crucial. If you need single character sequences matched in a specific order, enter them as regular expressions, i.e., as {c} instead of "c". In short, the multicharac- ter input sequences and regular expressions are matched to input text in the order specified. For the sake of efficiency, the single character input sequences (with exception of output set code -1/-2/-3) and input lists are handled as a case of remapping and are matched in the order of character codes associated with them. If you specify the same single input character twice for a given input set, the program will complain. The following com- binations of input and output sequences are allowed: Input Sequence Output Sequence "plain string" only "plain string" [list] [list] or "plain string" {regular expression} {substitution expression} or "plain string" When match is found, the matching sequence is removed and substituted with an output sequence. If this results is changing the current output character set, the appropri- ate SHIFT-IN/SHIFT-OUT pair is sent to the output before the transliterated output sequence. If list is used as the input sequence, you may either use: a) plain string as output sequence. In this case, if current input character belongs to the input list, it is replaced by the output string. I use it to delete ranges of characters which do not have any correspond- ing characters in the output set (e.g., some graphics characters). In this case, the order of characters on the input list is not important. b) if the output string is also a list then it has to contain exactly the same number of characters as the input list. In this case, the 1st character from the input list is replaced by the 1st character from the output list, the 2nd one by the 2nd one, etc. There- fore, the order of characters is important. Theoretically, if there is one-to-one correspondence JKL Last change: 22-Jan-1997 18 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) between characters in the input set and characters in the output set, you can make the conversion by using a single line consisting of two lists. But it looks ugly... And is difficult to read. And for the program, the substitution takes the same time, if the characters are specified separately, or when they are specified as matching lists. If regular expression is used to match the input charac- ters, the matching sequence may be replaced by a plain string or a substitution string, which was described above. Examples: 2 "CCCP" 0 "" will delete all occurrences of CCCP from the input file (but not Cccp or CCCp) for input set 2. 0 "\0xD1" 0 "ya" will replace all occurrences of character of the code \0xD1 with a two letter sequence "ya". 0 \0xD1 2 q will replace all characters \0xD1 with a character "q" and output SHIFT-IN/OUT sequence if necessary. 2 "q" 0 "\0xD1" will replace letter q (if the current input set is 2) with a code \0xD1. 0 "\0xD1" 2 "ya" will replace code \0xD1 with a sequence ya (assuming that SHIFT-OUT and SHIFT-IN sequences for output set 2 are: {\cyr and }, respectively, you will get {\cyr ya}). If a character is not specified in the transliteration table, it will be output as is, i.e., it corresponds to a line: 0 "c" 0 "c" where c is the character. If you want to delete cer- tain characters, you need to explicitly specify this, e.g.: 0 [a-z] 0 "" will delete all lower case Latin letters from the text. Below is an example of solving the identical SHIFT- IN/OUT sequences problem using character set code -3 which I promissed above. Assume, that you have 2 char- acter sets in the input file, but switching between them is accomplished by a "toggle" character. That is, if the toggle character is found, you should switch to the other set. Also, if you want to use the toggle character in the set, you need to double it. Let also assume that we have 2 character codes which will JKL Last change: 22-Jan-1997 19 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) never, ever appear. We can fool the translit by chang- ing toggle character to a unique character and back- stepping with character code -3 to check for SHIFT- IN/OUT sequences again. Let the % sign be a toggle character, and that we have two codes (for example codes \254 and \255) which will never appear in our text. The appropriate entries in the transliteration table may look like: 1 {%([^%])} -3 {\254\1} 2 {%([^%])} -3 {\255\1} 0 "%%" 0 "%" i.e., when the single % is seen in set 1, produce SHIFT-OUT sequence for set 2; and when a single % is seen in set 2, produce SHIFT-IN sequence for set 1. The appropriate input character set definitions will be: 2 # number of input character sets "\255" "" "" "" "" "" "\254" "" "" "" "" "" However, be warned. I never tried this. If this trick does not work, please let me know. Before you decide to create your own transliteration file, please examine existing transliteration files. Do yourself (and others) a favor --- put as many comments as possible there. If you allow others to use your transli- teration files, please include your name and e-mail address and file creation date. Program matches the sequences in a specific order: 1) if NEST counter is zero, Match/substitute current set SHIFT-IN sequence 2) If matched, restore previous set number 3) If matched, restore previous set nest counter 4) Match/substitute input SHIFT-OUT sequences 5) If matched, save current set and start new one 6) If matched, zero nest counter for NEST sequences 7) Match/substitute transliteration sequences 8) If matched and code = -1 make substitution in input buffer and continue matching the next sequence. 9) If matched and code = -2 make substitution and goto 7) 10) If matched and code = -3 make substitution and goto 1) 11) Match (no substitution) NEST-up and NEST-down to input buffer 12) If NEST-up matched, increment counter for current set 13) If NEST-down matched, decrement counter for current set 14) If match in 7) send substitute sequence to output 15) If no match in 7) (or code -1) output current input character 16) Advance input pointer to point at new characters 17) If End of File, break JKL Last change: 22-Jan-1997 20 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) 18) Goto 1) ASCII CHARACTER CODES dec hx oct ch dec hx oct ch 0 00 000 ^@ NUL 64 40 100 @ 1 01 001 ^A SOH 65 41 101 A 2 02 002 ^B STX 66 42 102 B 3 03 003 ^C ETX 67 43 103 C 4 04 004 ^D EOT 68 44 104 D 5 05 005 ^E ENQ 69 45 105 E 6 06 006 ^F ACK 70 46 106 F 7 07 007 ^G BEL 71 47 107 G 8 08 010 ^H BS 72 48 110 H 9 09 011 ^I HT 73 49 111 I 10 0a 012 ^J LF 74 4a 112 J 11 0b 013 ^K VT 75 4b 113 K 12 0c 014 ^L FF 76 4c 114 L 13 0d 015 ^M CR 77 4d 115 M 14 0e 016 ^N SO 78 4e 116 N 15 0f 017 ^O SI 79 4f 117 O 16 10 020 ^P DLE 80 50 120 P 17 11 021 ^Q DC1 81 51 121 Q 18 12 022 ^R DC2 82 52 122 R 19 13 023 ^S DC3 83 53 123 S 20 14 024 ^T DC4 84 54 124 T 21 15 025 ^U NAK 85 55 125 U 22 16 026 ^V SYN 86 56 126 V 23 17 027 ^W ETB 87 57 127 W 24 18 030 ^X CAN 88 58 130 X 25 19 031 ^Y EM 89 59 131 Y 26 1a 032 ^Z SUB 90 5a 132 Z 27 1b 033 ^[ ESC 91 5b 133 [ 28 1c 034 ^\ FS 92 5c 134 \ 29 1d 035 ^] GS 93 5d 135 ] 30 1e 036 ^^ RS 94 5e 136 ^ 31 1f 037 ^_ US 95 5f 137 _ 32 20 040 SP 96 60 140 ` 33 21 041 ! 97 61 141 a 34 22 042 " 98 62 142 b 35 23 043 # 99 63 143 c 36 24 044 $ 100 64 144 d 37 25 045 % 101 65 145 e 38 26 046 & 102 66 146 f 39 27 047 ' 103 67 147 g 40 28 050 ( 104 68 150 h 41 29 051 ) 105 69 151 i 42 2a 052 * 106 6a 152 j 43 2b 053 + 107 6b 153 k 44 2c 054 , 108 6c 154 l 45 2d 055 - 109 6d 155 m JKL Last change: 22-Jan-1997 21 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) 46 2e 056 . 110 6e 156 n 47 2f 057 / 111 6f 157 o 48 30 060 0 112 70 160 p 49 31 061 1 113 71 161 q 50 32 062 2 114 72 162 r 51 33 063 3 115 73 163 s 52 34 064 4 116 74 164 t 53 35 065 5 117 75 165 u 54 36 066 6 118 76 166 v 55 37 067 7 119 77 167 w 56 38 070 8 120 78 170 x 57 39 071 9 121 79 171 y 58 3a 072 : 122 7a 172 z 59 3b 073 ; 123 7b 173 { 60 3c 074 < 124 7c 174 | 61 3d 075 = 125 7d 175 } 62 3e 076 > 126 7e 176 ~ 63 3f 077 ? 127 7f 177 DEL CONVERSION: DECIMAL<-->OCTAL<-->HEX. 000 000 00 064 100 40 128 200 80 192 300 C0 001 001 01 065 101 41 129 201 81 193 301 C1 002 002 02 066 102 42 130 202 82 194 302 C2 003 003 03 067 103 43 131 203 83 195 303 C3 004 004 04 068 104 44 132 204 84 196 304 C4 005 005 05 069 105 45 133 205 85 197 305 C5 006 006 06 070 106 46 134 206 86 198 306 C6 007 007 07 071 107 47 135 207 87 199 307 C7 008 010 08 072 110 48 136 210 88 200 310 C8 009 011 09 073 111 49 137 211 89 201 311 C9 010 012 0A 074 112 4A 138 212 8A 202 312 CA 011 013 0B 075 113 4B 139 213 8B 203 313 CB 012 014 0C 076 114 4C 140 214 8C 204 314 CC 013 015 0D 077 115 4D 141 215 8D 205 315 CD 014 016 0E 078 116 4E 142 216 8E 206 316 CE 015 017 0F 079 117 4F 143 217 8F 207 317 CF 016 020 10 080 120 50 144 220 90 208 320 D0 017 021 11 081 121 51 145 221 91 209 321 D1 018 022 12 082 122 52 146 222 92 210 322 D2 019 023 13 083 123 53 147 223 93 211 323 D3 020 024 14 084 124 54 148 224 94 212 324 D4 021 025 15 085 125 55 149 225 95 213 325 D5 022 026 16 086 126 56 150 226 96 214 326 D6 023 027 17 087 127 57 151 227 97 215 327 D7 024 030 18 088 130 58 152 230 98 216 330 D8 025 031 19 089 131 59 153 231 99 217 331 D9 026 032 1A 090 132 5A 154 232 9A 218 332 DA 027 033 1B 091 133 5B 155 233 9B 219 333 DB 028 034 1C 092 134 5C 156 234 9C 220 334 DC 029 035 1D 093 135 5D 157 235 9D 221 335 DD JKL Last change: 22-Jan-1997 22 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) 030 036 1E 094 136 5E 158 236 9E 222 336 DE 031 037 1F 095 137 5F 159 237 9F 223 337 DF 032 040 20 096 140 60 160 240 A0 224 340 E0 033 041 21 097 141 61 161 241 A1 225 341 E1 034 042 22 098 142 62 162 242 A2 226 342 E2 035 043 23 099 143 63 163 243 A3 227 343 E3 036 044 24 100 144 64 164 244 A4 228 344 E4 037 045 25 101 145 65 165 245 A5 229 345 E5 038 046 26 102 146 66 166 246 A6 230 346 E6 039 047 27 103 147 67 167 247 A7 231 347 E7 040 050 28 104 150 68 168 250 A8 232 350 E8 041 051 29 105 151 69 169 251 A9 233 351 E9 042 052 2A 106 152 6A 170 252 AA 234 352 EA 043 053 2B 107 153 6B 171 253 AB 235 353 EB 044 054 2C 108 154 6C 172 254 AC 236 354 EC 045 055 2D 109 155 6D 173 255 AD 237 355 ED 046 056 2E 110 156 6E 174 256 AE 238 356 EE 047 057 2F 111 157 6F 175 257 AF 239 357 EF 048 060 30 112 160 70 176 260 B0 240 360 F0 049 061 31 113 161 71 177 261 B1 241 361 F1 050 062 32 114 162 72 178 262 B2 242 362 F2 051 063 33 115 163 73 179 263 B3 243 363 F3 052 064 34 116 164 74 180 264 B4 244 364 F4 053 065 35 117 165 75 181 265 B5 245 365 F5 054 066 36 118 166 76 182 266 B6 246 366 F6 055 067 37 119 167 77 183 267 B7 247 367 F7 056 070 38 120 170 78 184 270 B8 248 370 F8 057 071 39 121 171 79 185 271 B9 249 371 F9 058 072 3A 122 172 7A 186 272 BA 250 372 FA 059 073 3B 123 173 7B 187 273 BB 251 373 FB 060 074 3C 124 174 7C 188 274 BC 252 374 FC 061 075 3D 125 175 7D 189 275 BD 253 375 FD 062 076 3E 126 176 7E 190 276 BE 254 376 FE 063 077 3F 127 177 7F 191 277 BF 255 377 FF INSTALLATION Program is given in a source form. It was tried under UN*X, VMS and MS-DOS systems and ran. The file readme.doc contains the details on how to obtain the whole package. You can retrieve this file from anonymous ftp on kekule.osc.edu in the directory /pub/russian/translit. You can also obtain it via e-mail by sending a message: get translit/readme.doc from russian to OSCPOST@osc.edu or OSCPOST@OHSTPY.BITNET. The source of the program consists of several files: paths.h must be edited before compilation. It contains its own comments what to do. The defines in this file relate to JKL Last change: 22-Jan-1997 23 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) the operating system you are using and the default path for searching transliteration table. translit.c It contains the main program. This was intended to be a portable code. reg_exp.h the include file for regular expression matching library of Henry Spencer from the University of Toronto. This regular expression package was posted to comp.sources.misc (volume 3). Also 4 patches were posted (in volumes: 3, 4, 4, 10). I applied the patches to the original code and made small modifications to the code, which are marked in the source code. reg_exp.c the regular expression library for compilation and matching of regular expressions. reg_sub.c the regular expression substitution routine. Before you compile this program you have to edit paths.h. Read comments in the file. During compilation, all source code should reside in the current directory. Then you may compile the program under UN*X as (for exam- ple): cc -o translit translit.c reg_exp.c reg_sub.c and copy the program translit to some standard directory which is in users' path (for example: /usr/local/bin). Then you need to copy transliteration tables to the directory which you have chosen in paths.h. If you get errors, then it is not OK. Please, report them to the author (with all the gory details: error message, line number, machine, operating system, etc.). Under VMS (VAXes) you need to compile it as: cc translit cc reg_exp cc reg_sub link translit+reg_exp+reg_sub,sys$library:vaxcrtl/lib and before you can use the program, you need to type (or better put into your LOGIN.COM file) a line: translit == "$SYS$USER:[ME.TRA]TRANSLIT.EXE" or whatever is the full path to the translit executable image which you created with LINK. Note the quotes and the $ sign in front of program path. On an IBM-PC I used MicroSoft C 5.1 as: cl /FeTRANSLIT /AL /FPc /W1 /F 5000 /Ox /Gs translit.c JKL Last change: 22-Jan-1997 24 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) reg_exp.c reg_sub.c RULES, CONDITIONS AND AUTHOR'S WHISHES You can distribute this code and associated files under these conditions: 1) You will distribute all files (even if you think that they are garbage). You may get the complete set from anonymous ftp at kekule.osc.edu in /pub/russian/translit. You can also get the program and associated files via e-mail. To get the instructions for e-mail distribution send a line: send translit/readme.doc from russian to OSCPOST@osc.edu or OSCPOST@OHSTPY.BITNET. You are not allowed to distribute the incomplete distribution. The following files should be present in the distribu- tion: alt-gos.rus - ALT to GOSTCII table alt-koi8.rus - ALT to KOI8 table example.alt.uu - uuencoded example in ALT example.ko8.uu - uuencoded example in KOI8 example.pho - phonetic transliteration example example.tex - LaTeX example gos-alt.rus - GOSTCII to ALT table gos-koi8.rus - GOSTCII to KOI8 table koi7-8.rus - KOI7 to KOI8 table koi7nl-8.rus - KOI7 (no Latin) to KOI8 table koi8-7.rus - KOI8 to KOI7 table koi8-alt.rus - KOI8 to ALT table koi8-gos.rus - KOI8 to GOSTCII table koi8-lc.rus - KOI8 to Library of Congress table koi8-phg.rus - KOI8 to GOST transliteration koi8-php.rus - KOI8 to Pokrovsky transliteration koi8-ltx.rus - KOI8 to LaTeX conversion koi8-tex.rus - KOI8 to Plain TeX conversion order.txt - Order form for ordering the program paths.h - Include file for translit.c phg-koi8.rus - GOST transliteration to KOI8 pho-8sim.rus - Simple phonetic to KOI8 pho-koi8.rus - Various phonetic to KOI8 php-koi8.rus - Pokrovsky to KOI8 readme.doc - short description of the files reg_exp.c - regular expression code by Henry Spencer reg_exp.h - include for reg_exp.c and reg_sub.c reg_sub.c - regular expression code by H. Spencer ltx-koi8.rus - LaTeX to KOI8 translit.c - TRANSLIT main program translit.ps - TRANSLIT manual in PostScript translit.1 - TRANSLIT manual in *roff translit.txt - Plain ASCII TRANSLIT manual JKL Last change: 22-Jan-1997 25 TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) 2) You may expand/change the files and the program and distribute modified files, provided that you do not delete anything (you can always comment the unnecessary portions out) and clearly mark your changes. Please send the copy of the modified version to the author, though you are not required to do so. I will give you all the credit for your enhancements. I simply wish that there is a single point of distribution for this code, so it is maintained to some extent. If you create additional transliteration definition files, please, send them to the author if you may. I will add them to the program distribution. I want to fix bugs and expand/optimize this code, but I need your help. I need your transli- teration files for languages which I do not know or do not use currently. Your suggestions for improving docu- mentation are most welcome (I am not a native English speaker). 3) You will not charge money for the program and/or asso- ciated files, except for media and copying costs. If you want to sell it, contact the author first. Bear in mind that the regular expression package by Henry Spencer has some copyright restrictions. But there are other regu- lar expression packages which do not have these restric- tions (which are not violated by this offering). 4) I will gladly help you with advice on compiling this software and try to fix bugs when time allows. However, if you want a ready to run executable, you need to order it for a very nominal fee from JKL ENTERPRISES, INC. as described in the file order.txt which must be a part of a complete distribution. AUTHOR Jan Labanowski, P.O. Box 21821, Columbus, OH 43221-0821, USA. E-mail: jkl@osc.edu, JKL@OHSTPY.BITNET. JKL Last change: 22-Jan-1997 26