commit 178574b66509c9ff7df4ad26c84a8884567e93b4 Author: Greg Kroah-Hartman Date: Sat Dec 8 12:59:10 2018 +0100 Linux 4.19.8 commit 55cbeea76e769b12cd0f1340132d32781f73a3dc Author: Jens Axboe Date: Thu Dec 6 22:17:44 2018 -0700 blk-mq: punt failed direct issue to dispatch list commit c616cbee97aed4bc6178f148a7240206dcdb85a6 upstream. After the direct dispatch corruption fix, we permanently disallow direct dispatch of non read/write requests. This works fine off the normal IO path, as they will be retried like any other failed direct dispatch request. But for the blk_insert_cloned_request() that only DM uses to bypass the bottom level scheduler, we always first attempt direct dispatch. For some types of requests, that's now a permanent failure, and no amount of retrying will make that succeed. This results in a livelock. Instead of making special cases for what we can direct issue, and now having to deal with DM solving the livelock while still retaining a BUSY condition feedback loop, always just add a request that has been through ->queue_rq() to the hardware queue dispatch list. These are safe to use as no merging can take place there. Additionally, if requests do have prepped data from drivers, we aren't dependent on them not sharing space in the request structure to safely add them to the IO scheduler lists. This basically reverts ffe81d45322c and is based on a patch from Ming, but with the list insert case covered as well. Fixes: ffe81d45322c ("blk-mq: fix corruption with direct issue") Cc: stable@vger.kernel.org Suggested-by: Ming Lei Reported-by: Bart Van Assche Tested-by: Ming Lei Acked-by: Mike Snitzer Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 6235c229fea4e5c5fb35002a5ee1ae2dc65d3198 Author: Guoqing Jiang Date: Fri Oct 19 12:08:22 2018 +0800 tipc: use destination length for copy string commit 29e270fc32192e7729057963ae7120663856c93e upstream. Got below warning with gcc 8.2 compiler. net/tipc/topsrv.c: In function ‘tipc_topsrv_start’: net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(srv->name, name, strlen(name) + 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/topsrv.c:660:27: note: length computed here strncpy(srv->name, name, strlen(name) + 1); ^~~~~~~~~~~~ So change it to correct length and use strscpy. Signed-off-by: Guoqing Jiang Acked-by: Ying Xue Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4e84cccacb1291fedd2518a7e074c3152705fd77 Author: Alexey Brodkin Date: Tue Nov 20 13:30:19 2018 +0300 arc: [devboards] Add support of NFSv3 ACL commit 6b04114f6fae5e84d33404c2970b1949c032546e upstream. By default NFSv3 doesn't support ACL (Access Control Lists) which might be quite convenient to have so that mounted NFS behaves exactly as any other local file-system. In particular missing support of ACL makes umask useless. This among other thigs fixes Glibc's "nptl/tst-umask1". Signed-off-by: Alexey Brodkin Cc: Cupertino Miranda Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman commit 41e0254d32bd3f1d74db66d02ee57ab9dce3e474 Author: Kevin Hilman Date: Fri Nov 30 15:51:56 2018 +0300 ARC: change defconfig defaults to ARCv2 commit b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream. Change the default defconfig (used with 'make defconfig') to the ARCv2 nsim_hs_defconfig, and also switch the default Kconfig ISA selection to ARCv2. This allows several default defconfigs (e.g. make defconfig, make allnoconfig, make tinyconfig) to all work with ARCv2 by default. Note since we change default architecture from ARCompact to ARCv2 it's required to explicitly mention architecture type in ARCompact defconfigs otherwise ARCv2 will be implied and binaries will be generated for ARCv2. Cc: # 4.4.x Signed-off-by: Kevin Hilman Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman commit b0234f15d2e25e014347bd43869b460b2228e72f Author: Qu Wenruo Date: Fri Nov 23 09:06:36 2018 +0800 btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable commit 10950929e994c5ecee149ff0873388d3c98f12b5 upstream. [BUG] A completely valid btrfs will refuse to mount, with error message like: BTRFS critical (device sdb2): corrupt leaf: root=2 block=239681536 slot=172 \ bg_start=12018974720 bg_len=10888413184, invalid block group size, \ have 10888413184 expect (0, 10737418240] This has been reported several times as the 4.19 kernel is now being used. The filesystem refuses to mount, but is otherwise ok and booting 4.18 is a workaround. Btrfs check returns no error, and all kernels used on this fs is later than 2011, which should all have the 10G size limit commit. [CAUSE] For a 12 devices btrfs, we could allocate a chunk larger than 10G due to stripe stripe bump up. __btrfs_alloc_chunk() |- max_stripe_size = 1G |- max_chunk_size = 10G |- data_stripe = 11 |- if (1G * 11 > 10G) { stripe_size = 976128930; stripe_size = round_up(976128930, SZ_16M) = 989855744 However the final stripe_size (989855744) * 11 = 10888413184, which is still larger than 10G. [FIX] For the comprehensive check, we need to do the full check at chunk read time, and rely on bg <-> chunk mapping to do the check. We could just skip the length check for now. Fixes: fce466eab7ac ("btrfs: tree-checker: Verify block_group_item") Cc: stable@vger.kernel.org # v4.19+ Reported-by: Wang Yugui Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 280d652e0dd2f20dafe81e592ee5243fa9ed0b03 Author: Adam Wong Date: Thu Nov 29 10:04:35 2018 -0800 Input: elan_i2c - add support for ELAN0621 touchpad commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream. Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 77dd91caddfee19b1447bac8060c0bda63709c60 Author: Noah Westervelt Date: Thu Nov 29 10:10:35 2018 -0800 Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream. Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 08a7e486a19d5dab0c8786d2eecc7e0708e484d8 Author: Patrick Gaskin Date: Mon Nov 12 11:12:24 2018 -0800 Input: elan_i2c - add ELAN0620 to the ACPI table commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream. Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by: Patrick Gaskin Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 918cd7d1dfac5e838023985f5c8a9c5b63c16010 Author: Brian Norris Date: Mon Nov 12 11:23:39 2018 -0800 Input: cros_ec_keyb - fix button/switch capability reports commit ac5722c1643a2fb75224c79b578214956d34f989 upstream. The cros_ec_keyb_bs array lists buttons and switches together, expecting that its users will match the appropriate type and bit fields. But cros_ec_keyb_register_bs() only checks the 'bit' field, which causes misreported input capabilities in some cases. For example, tablets (e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to share the same bit. (This has comedic effect on a tablet, in which a power-management daemon then thinks this "lid" is closed, and so puts the system to sleep as soon as it boots!) To fix this, check both the 'ev_type' and 'bit' fields before reporting the capability. Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid (Scarlet / Acer Chromebook Tab 10). This error got introduced when porting the feature from the downstream Chromium OS kernel to be upstreamed. Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches") Cc: Signed-off-by: Brian Norris Reviewed-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 25e78d0557e185a73ab29ac31cb916ace843b451 Author: Christian Hoff Date: Mon Nov 12 11:11:29 2018 -0800 Input: matrix_keypad - check for errors from of_get_named_gpio() commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff Suggested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 1673900500686a4588b3abbb342dbee7c119a2f8 Author: Lyude Paul Date: Sat Nov 24 23:28:10 2018 -0800 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus commit 9df39bedbf292680655c6a947c77d6562c693d4a upstream. Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 58a99d3722fe1962cbdab96a18de315c04fbc2f3 Author: Cameron Gutman Date: Thu Nov 29 10:09:33 2018 -0800 Input: xpad - quirk all PDP Xbox One gamepads commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream. Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit c47bb7af582af9824378396d9ef99e15ffdb5242 Author: Martin Wilck Date: Mon Nov 12 09:58:37 2018 +0100 scsi: lpfc: fix block guard enablement on SLI3 adapters commit dfb7513374c1f8e7cd595106fbdba3fd07ebaf30 upstream. Since f44ac12f1dcc, BG enablement is tracked with the LPFC_SLI3_BG_ENABLED bit, which is set in lpfc_get_cfgparam before lpfc_sli_config_sli_port() is called. The bit shouldn't be cleared before checking the feature. Based on problem analysis by David Bond. Fixes: f44ac12f1dcc "scsi: lpfc: Memory allocation error during driver start-up on power8" Tested-by: David Bond Signed-off-by: Martin Wilck Cc: stable@vger.kernel.org # 4.17.x Cc: stable@vger.kernel.org # 4.18.x Cc: stable@vger.kernel.org # 4.19.x Reviewed-by: Hannes Reinecke Acked-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 2cb8d55be86cdebe94742d7e8bc53e243ec9ee90 Author: Lihong Yang Date: Wed Nov 21 09:15:37 2018 -0800 i40e: Fix deletion of MAC filters commit eab077aa84331afbda071a213925d4cdbca58941 upstream. In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for the PF state is wrongly set for the VSI. Deleting any of the MAC filters has caused the incorrect syncing for the PF. Fix it by setting this state flag to the intended PF. CC: stable Signed-off-by: Lihong Yang Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman commit 4c202ade1e743fc21e54c441d7f790604989db07 Author: Paul Moore Date: Wed Nov 28 12:57:33 2018 -0500 selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN commit 598e1a42e9626213565d3b22ea948ce78556512a upstream. Commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") added new RTM_* definitions without properly updating SELinux, this patch adds the necessary SELinux support. While there was a BUILD_BUG_ON() in the SELinux code to protect from exactly this case, it was bypassed in the broken commit. In order to hopefully prevent this from happening in the future, add additional comments which provide some instructions on how to resolve the BUILD_BUG_ON() failures. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Cc: # 4.19 Acked-by: David S. Miller Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 85bb1e8b7013996761d3f514faafe8862b2982f6 Author: Wei Wang Date: Mon Nov 12 12:23:14 2018 +0000 svm: Add mutex_lock to protect apic_access_page_done on AMD systems commit 30510387a5e45bfcf8190e03ec7aa15b295828e2 upstream. There is a race condition when accessing kvm->arch.apic_access_page_done. Due to it, x86_set_memory_region will fail when creating the second vcpu for a svm guest. Add a mutex_lock to serialize the accesses to apic_access_page_done. This lock is also used by vmx for the same purpose. Signed-off-by: Wei Wang Signed-off-by: Amadeusz Juskowiak Signed-off-by: Julian Stecklina Signed-off-by: Suravee Suthikulpanit Reviewed-by: Joerg Roedel Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit e762e1407bc85ae45a6d42267cb8af468b61d891 Author: Laura Abbott Date: Wed Sep 19 18:59:01 2018 -0700 kgdboc: Fix warning with module build commit 1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream. After 2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is now only used when built in, resulting in a warning when compiled as a module: drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function] static int kgdboc_option_setup(char *opt) ^~~~~~~~~~~~~~~~~~~ Move the function under the appropriate ifdef for builtin only. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Reported-by: Stephen Rothwell Signed-off-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman commit 5eede3d09625f12385be732300fb1b8146fcdd77 Author: Laura Abbott Date: Mon Sep 10 16:20:14 2018 -0700 kgdboc: Fix restrict error commit 2dd453168643d9475028cd867c57e65956a0f7f9 upstream. There's an error when compiled with restrict: drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’: drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict] strcpy(config, opt); ^~~~~~~~~~~~~~~~~~~ As the error implies, this is from trying to use config as both source and destination. Drop the call to the function where config is the argument since nothing else happens in the function. Signed-off-by: Laura Abbott Reviewed-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman commit 8f193a716e56f30e36a4c851e59bf6fa74af8d9f Author: Andrea Arcangeli Date: Fri Nov 30 14:09:43 2018 -0800 userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set commit dcf7fe9d89763a28e0f43975b422ff141fe79e43 upstream. Set the page dirty if VM_WRITE is not set because in such case the pte won't be marked dirty and the page would be reclaimed without writepage (i.e. swapout in the shmem case). This was found by source review. Most apps (certainly including QEMU) only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't modify the memory in the first place. This is for correctness and it could help the non cooperative use case to avoid unexpected data loss. Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com Reviewed-by: Hugh Dickins Cc: stable@vger.kernel.org Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: Hugh Dickins Signed-off-by: Andrea Arcangeli Cc: "Dr. David Alan Gilbert" Cc: Jann Horn Cc: Mike Kravetz Cc: Mike Rapoport Cc: Peter Xu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 4ce337622f2bbc0df61b0b76aa60388f5def5646 Author: Andrea Arcangeli Date: Fri Nov 30 14:09:37 2018 -0800 userfaultfd: shmem: add i_size checks commit e2a50c1f64145a04959df2442305d57307e5395a upstream. With MAP_SHARED: recheck the i_size after taking the PT lock, to serialize against truncate with the PT lock. Delete the page from the pagecache if the i_size_read check fails. With MAP_PRIVATE: check the i_size after the PT lock before mapping anonymous memory or zeropages into the MAP_PRIVATE shmem mapping. A mostly irrelevant cleanup: like we do the delete_from_page_cache() pagecache removal after dropping the PT lock, the PT lock is a spinlock so drop it before the sleepable page lock. Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli Reviewed-by: Mike Rapoport Reviewed-by: Hugh Dickins Reported-by: Jann Horn Cc: Cc: "Dr. David Alan Gilbert" Cc: Mike Kravetz Cc: Peter Xu Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 6e44dd02c95508f6df5eca4d46adbb75233ea181 Author: Andrea Arcangeli Date: Fri Nov 30 14:09:28 2018 -0800 userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem commit 5b51072e97d587186c2f5390c8c9c1fb7e179505 upstream. Userfaultfd did not create private memory when UFFDIO_COPY was invoked on a MAP_PRIVATE shmem mapping. Instead it wrote to the shmem file, even when that had not been opened for writing. Though, fortunately, that could only happen where there was a hole in the file. Fix the shmem-backed implementation of UFFDIO_COPY to create private memory for MAP_PRIVATE mappings. The hugetlbfs-backed implementation was already correct. This change is visible to userland, if userfaultfd has been used in unintended ways: so it introduces a small risk of incompatibility, but is necessary in order to respect file permissions. An app that uses UFFDIO_COPY for anything like postcopy live migration won't notice the difference, and in fact it'll run faster because there will be no copy-on-write and memory waste in the tmpfs pagecache anymore. Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like before. The real zeropage can also be built on a MAP_PRIVATE shmem mapping through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is never dirty, in turn even an mprotect upgrading the vma permission from PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable. Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli Reported-by: Mike Rapoport Reviewed-by: Hugh Dickins Cc: Cc: "Dr. David Alan Gilbert" Cc: Jann Horn Cc: Mike Kravetz Cc: Peter Xu Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 10f98c134b02d11923d45ce6688c2479435e8ec9 Author: Andrea Arcangeli Date: Fri Nov 30 14:09:25 2018 -0800 userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails commit 9e368259ad988356c4c95150fafd1a06af095d98 upstream. Patch series "userfaultfd shmem updates". Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the lack of the VM_MAYWRITE check and the lack of i_size checks. Then looking into the above we also fixed the MAP_PRIVATE case. Hugh by source review also found a data loss source if UFFDIO_COPY is used on shmem MAP_SHARED PROT_READ mappings (the production usages incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't happen in those production usages like with QEMU). The whole patchset is marked for stable. We verified QEMU postcopy live migration with guest running on shmem MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE. Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU unconditionally invokes a punch hole if the guest mapping is filebacked and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and for the anon backend). This patch (of 5): We internally used EFAULT to communicate with the caller, switch to ENOENT, so EFAULT can be used as a non internal retval. Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli Reviewed-by: Mike Rapoport Reviewed-by: Hugh Dickins Cc: Mike Kravetz Cc: Jann Horn Cc: Peter Xu Cc: "Dr. David Alan Gilbert" Cc: Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 212ad3d70222a7da4425306b7443c67239bce88b Author: Lyude Paul Date: Sat Nov 24 20:21:17 2018 -0500 drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut() commit 97b2a3180a559a33852ac0cd77904166069484fd upstream. Currently on driver bringup with KASAN enabled, meson triggers an OOB memory access as shown below: [ 117.904528] ================================================================== [ 117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890 [ 117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498 [ 117.904601] [ 118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20 [ 118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 118.099768] Call trace: [ 118.102181] dump_backtrace+0x0/0x3e8 [ 118.105796] show_stack+0x14/0x20 [ 118.109083] dump_stack+0x130/0x1c4 [ 118.112539] print_address_description+0x60/0x25c [ 118.117214] kasan_report+0x1b4/0x368 [ 118.120851] __asan_report_load4_noabort+0x18/0x20 [ 118.125566] meson_viu_set_osd_lut+0x7a0/0x890 [ 118.129953] meson_viu_init+0x10c/0x290 [ 118.133741] meson_drv_bind_master+0x474/0x748 [ 118.138141] meson_drv_bind+0x10/0x18 [ 118.141760] try_to_bring_up_master+0x3d8/0x768 [ 118.146249] component_add+0x214/0x570 [ 118.149978] meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi] [ 118.155404] platform_drv_probe+0x98/0x138 [ 118.159455] really_probe+0x2a0/0xa70 [ 118.163070] driver_probe_device+0x1b4/0x2d8 [ 118.167299] __driver_attach+0x200/0x280 [ 118.171189] bus_for_each_dev+0x10c/0x1a8 [ 118.175144] driver_attach+0x38/0x50 [ 118.178681] bus_add_driver+0x330/0x608 [ 118.182471] driver_register+0x140/0x388 [ 118.186361] __platform_driver_register+0xc8/0x108 [ 118.191117] meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi] [ 118.198022] do_one_initcall+0x12c/0x3bc [ 118.201883] do_init_module+0x1fc/0x638 [ 118.205673] load_module+0x4b4c/0x6808 [ 118.209387] __se_sys_init_module+0x2e8/0x3c0 [ 118.213699] __arm64_sys_init_module+0x68/0x98 [ 118.218100] el0_svc_common+0x104/0x210 [ 118.221893] el0_svc_handler+0x48/0xb8 [ 118.225594] el0_svc+0x8/0xc [ 118.228429] [ 118.229887] The buggy address belongs to the variable: [ 118.235007] eotf_33_linear_mapping+0x84/0xc0 [ 118.239301] [ 118.240752] Memory state around the buggy address: [ 118.245522] ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.252695] ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00 [ 118.267000] ^ [ 118.271222] ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 118.278393] ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa [ 118.285542] ================================================================== [ 118.292699] Disabling lock debugging due to kernel taint It seems that when looping through the OSD EOTF LUT maps, we use the same max iterator for OETF: 20. This is wrong though, since 20*2 is 40, which means that we'll stop out of bounds on the EOTF maps. But, this whole thing is already confusing enough to read through as-is, so let's just replace all of the hardcoded sizes with OSD_(OETF/EOTF)_LUT_SIZE / 2. Signed-off-by: Lyude Paul Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Cc: Neil Armstrong Cc: Maxime Ripard Cc: Carlo Caione Cc: Kevin Hilman Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: # v4.10+ Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20181125012117.31915-1-lyude@redhat.com Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman commit ea6bb077bff27b94d2d612ace7d015fe8dba560a Author: Lyude Paul Date: Sat Nov 24 14:12:38 2018 -0500 drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config commit 995b278e4723b26f8ebf0e7c119286d16c712747 upstream. Seeing as we use this registermap in the context of our IRQ handlers, we need to be using spinlocks for reading/writing registers so that we can still read them from IRQ handlers without having to grab any mutexes and accidentally sleep. We don't currently do this, as pointed out by lockdep: [ 18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0 [ 18.413864] INFO: lockdep is turned off. [ 18.417675] irq event stamp: 12 [ 18.420778] hardirqs last enabled at (11): [] _raw_spin_unlock_irq+0x2c/0x60 [ 18.429510] hardirqs last disabled at (12): [] __schedule+0xc4/0xa60 [ 18.437345] softirqs last enabled at (0): [] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 18.446684] softirqs last disabled at (0): [<0000000000000000>] (null) [ 18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.480037] Workqueue: hci0 hci_power_on [bluetooth] [ 18.487138] Call trace: [ 18.494192] dump_backtrace+0x0/0x1b8 [ 18.501280] show_stack+0x14/0x20 [ 18.508361] dump_stack+0xbc/0xf4 [ 18.515427] ___might_sleep+0x140/0x1d8 [ 18.522515] __might_sleep+0x50/0x88 [ 18.529582] __mutex_lock+0x60/0x870 [ 18.536621] mutex_lock_nested+0x1c/0x28 [ 18.543660] regmap_lock_mutex+0x10/0x18 [ 18.550696] regmap_read+0x38/0x70 [ 18.557727] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.564804] __handle_irq_event_percpu+0xac/0x410 [ 18.571891] handle_irq_event_percpu+0x34/0x88 [ 18.578982] handle_irq_event+0x48/0x78 [ 18.586051] handle_fasteoi_irq+0xac/0x160 [ 18.593061] generic_handle_irq+0x24/0x38 [ 18.599989] __handle_domain_irq+0x60/0xb8 [ 18.606857] gic_handle_irq+0x50/0xa0 [ 18.613659] el1_irq+0xb4/0x130 [ 18.620394] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.627111] schedule+0x38/0xa0 [ 18.633781] schedule_timeout+0x3a8/0x510 [ 18.640389] wait_for_common+0x15c/0x180 [ 18.646905] wait_for_completion+0x14/0x20 [ 18.653319] mmc_wait_for_req_done+0x28/0x168 [ 18.659693] mmc_wait_for_req+0xa8/0xe8 [ 18.665978] mmc_wait_for_cmd+0x64/0x98 [ 18.672180] mmc_io_rw_direct_host+0x94/0x130 [ 18.678385] mmc_io_rw_direct+0x10/0x18 [ 18.684516] sdio_enable_func+0xe8/0x1d0 [ 18.690627] btsdio_open+0x24/0xc0 [btsdio] [ 18.696821] hci_dev_do_open+0x64/0x598 [bluetooth] [ 18.703025] hci_power_on+0x50/0x270 [bluetooth] [ 18.709163] process_one_work+0x2a0/0x6e0 [ 18.715252] worker_thread+0x40/0x448 [ 18.721310] kthread+0x12c/0x130 [ 18.727326] ret_from_fork+0x10/0x1c [ 18.735555] ------------[ cut here ]------------ [ 18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180 [ 18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88 [ 18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O) dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas meson_gxbb_wdt pwm_meson efivarfs ipv6 [ 18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.818045] Workqueue: hci0 hci_power_on [bluetooth] [ 18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 18.829891] pc : __might_sleep+0x7c/0x88 [ 18.835722] lr : __might_sleep+0x7c/0x88 [ 18.841256] sp : ffff000008003cb0 [ 18.846751] x29: ffff000008003cb0 x28: 0000000000000000 [ 18.852269] x27: ffff00000938e000 x26: ffff800010283000 [ 18.857726] x25: ffff800010353280 x24: ffff00000868ef50 [ 18.863166] x23: 0000000000000000 x22: 0000000000000000 [ 18.868551] x21: 0000000000000000 x20: 000000000000038c [ 18.873850] x19: ffff000008cd08c0 x18: 0000000000000010 [ 18.879081] x17: ffff000008a68cb0 x16: 0000000000000000 [ 18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20 [ 18.889239] x13: 0000000000000001 x12: 00000000ffffffff [ 18.894261] x11: ffff000008adfa48 x10: 0000000000000001 [ 18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000 [ 18.904674] x7 : ffff00000812136c x6 : 0000000000000000 [ 18.909895] x5 : 0000000000000000 x4 : 0000000000000001 [ 18.915080] x3 : 0000000000000007 x2 : 0000000000000007 [ 18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000 [ 18.925443] Call trace: [ 18.929904] __might_sleep+0x7c/0x88 [ 18.934311] __mutex_lock+0x60/0x870 [ 18.938687] mutex_lock_nested+0x1c/0x28 [ 18.943076] regmap_lock_mutex+0x10/0x18 [ 18.947453] regmap_read+0x38/0x70 [ 18.951842] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.956269] __handle_irq_event_percpu+0xac/0x410 [ 18.960712] handle_irq_event_percpu+0x34/0x88 [ 18.965176] handle_irq_event+0x48/0x78 [ 18.969612] handle_fasteoi_irq+0xac/0x160 [ 18.974058] generic_handle_irq+0x24/0x38 [ 18.978501] __handle_domain_irq+0x60/0xb8 [ 18.982938] gic_handle_irq+0x50/0xa0 [ 18.987351] el1_irq+0xb4/0x130 [ 18.991734] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.996180] schedule+0x38/0xa0 [ 19.000609] schedule_timeout+0x3a8/0x510 [ 19.005064] wait_for_common+0x15c/0x180 [ 19.009513] wait_for_completion+0x14/0x20 [ 19.013951] mmc_wait_for_req_done+0x28/0x168 [ 19.018402] mmc_wait_for_req+0xa8/0xe8 [ 19.022809] mmc_wait_for_cmd+0x64/0x98 [ 19.027177] mmc_io_rw_direct_host+0x94/0x130 [ 19.031563] mmc_io_rw_direct+0x10/0x18 [ 19.035922] sdio_enable_func+0xe8/0x1d0 [ 19.040294] btsdio_open+0x24/0xc0 [btsdio] [ 19.044742] hci_dev_do_open+0x64/0x598 [bluetooth] [ 19.049228] hci_power_on+0x50/0x270 [bluetooth] [ 19.053687] process_one_work+0x2a0/0x6e0 [ 19.058143] worker_thread+0x40/0x448 [ 19.062608] kthread+0x12c/0x130 [ 19.067064] ret_from_fork+0x10/0x1c [ 19.071513] irq event stamp: 12 [ 19.075937] hardirqs last enabled at (11): [] _raw_spin_unlock_irq+0x2c/0x60 [ 19.083560] hardirqs last disabled at (12): [] __schedule+0xc4/0xa60 [ 19.091401] softirqs last enabled at (0): [] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 19.100801] softirqs last disabled at (0): [<0000000000000000>] (null) [ 19.108135] ---[ end trace 38c4920787b88c75 ]--- So, fix this by enabling the fast_io option in our regmap config so that regmap uses spinlocks for locking instead of mutexes. Signed-off-by: Lyude Paul Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY") Cc: Daniel Vetter Cc: Neil Armstrong Cc: Carlo Caione Cc: Kevin Hilman Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: # v4.12+ Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20181124191238.28276-1-lyude@redhat.com Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman commit 736f04212a28d9e14b6a22f7218fb4892e1c18fe Author: Neil Armstrong Date: Thu Nov 22 17:01:03 2018 +0100 drm/meson: Fixes for drm_crtc_vblank_on/off support commit 2bcd3ecab773f73211c45bb1430bb52ac641f271 upstream. Since Linux 4.17, calls to drm_crtc_vblank_on/off are mandatory, and we get a warning when ctrc is disabled : " driver forgot to call drm_crtc_vblank_off()" But, the vsync IRQ was not totally disabled due the transient hardware state and specific interrupt line, thus adding proper IRQ masking from the HHI system control registers. The last change fixes a race condition introduced by calling the added drm_crtc_vblank_on/off when an HPD event occurs from the HDMI connector, triggering a WARN_ON() in the _atomic_begin() callback when the CRTC is disabled, thus also triggering a WARN_ON() in drm_vblank_put() : WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/meson/meson_crtc.c:157 meson_crtc_atomic_begin+0x78/0x80 [...] Call trace: meson_crtc_atomic_begin+0x78/0x80 drm_atomic_helper_commit_planes+0x140/0x218 drm_atomic_helper_commit_tail+0x38/0x80 commit_tail+0x7c/0x80 drm_atomic_helper_commit+0xdc/0x150 drm_atomic_commit+0x54/0x60 restore_fbdev_mode_atomic+0x198/0x238 restore_fbdev_mode+0x6c/0x1c0 drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xf0 drm_fb_helper_set_par+0x34/0x60 drm_fb_helper_hotplug_event.part.28+0xb8/0xc8 drm_fbdev_client_hotplug+0xa4/0xe0 drm_client_dev_hotplug+0x90/0xe0 drm_kms_helper_hotplug_event+0x3c/0x48 drm_helper_hpd_irq_event+0x134/0x168 dw_hdmi_top_thread_irq+0x3c/0x50 [...] WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xb4/0xc8 [...] Call trace: drm_vblank_put+0xb4/0xc8 drm_crtc_vblank_put+0x24/0x30 drm_atomic_helper_wait_for_vblanks.part.9+0x130/0x2b8 drm_atomic_helper_commit_tail+0x68/0x80 [...] The issue is that vblank need to be enabled in any occurrence of : - atomic_enable() - atomic_begin() and state->enable == true, which was not the case Moving the CRTC enable code to a common function and calling in one of these occurrence solves this race condition and makes sure vblank is enabled in each call to _atomic_begin() from the HPD event leading to drm_atomic_helper_commit_planes(). To Summarize : - Make sure that the CRTC code will call the drm_crtc_vblank_on()/off() - *Really* mask the Vsync IRQ - Initialize and enable vblank at the first atomic_begin()/_atomic_enable() Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: Neil Armstrong Reviewed-by: Lyude Paul [fixed typos+added cc for stable] Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20181122160103.10993-1-narmstrong@baylibre.com Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman commit c952979ad95bb1be30d3e65187d74034bd49c9e8 Author: Sergio Correia Date: Thu Nov 22 02:33:29 2018 -0300 drm: set is_master to 0 upon drm_new_set_master() failure commit 23a336b34258aba3b50ea6863cca4e81b5ef6384 upstream. When drm_new_set_master() fails, set is_master to 0, to prevent a possible NULL pointer deref. Here is a problematic flow: we check is_master in drm_is_current_master(), then proceed to call drm_lease_owner() passing master. If we do not restore is_master status when drm_new_set_master() fails, we may have a situation in which is_master will be 1 and master itself, NULL, leading to the deref of a NULL pointer in drm_lease_owner(). This fixes the following OOPS, observed on an ArchLinux running a 4.19.2 kernel: [ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 97.807224] PGD 0 P4D 0 [ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1 [ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018 [ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 [ 97.807224] Call Trace: [ 97.807224] drm_is_current_master+0x1a/0x30 [drm] [ 97.807224] drm_master_release+0x3e/0x130 [drm] [ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm] [ 97.807224] drm_open+0x1ba/0x1e0 [drm] [ 97.807224] drm_stub_open+0xaf/0xe0 [drm] [ 97.807224] chrdev_open+0xa3/0x1b0 [ 97.807224] ? cdev_put.part.0+0x20/0x20 [ 97.807224] do_dentry_open+0x132/0x340 [ 97.807224] path_openat+0x2d1/0x14e0 [ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520 [ 97.807224] do_filp_open+0x93/0x100 [ 97.807224] ? __check_object_size+0x102/0x189 [ 97.807224] ? _raw_spin_unlock+0x16/0x30 [ 97.807224] do_sys_open+0x186/0x210 [ 97.807224] do_syscall_64+0x5b/0x170 [ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 97.807224] RIP: 0033:0x7f4147b07976 [ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44 [ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976 [ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c [ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024 [ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012 [ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid [ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler [ 98.040039] CR2: 0000000000000080 [ 98.040039] ---[ end trace 3b65093b6fe62b2f ]--- [ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 Signed-off-by: Sergio Correia Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman commit 8a8effbe56b1b99c3376bf78882be11c35c9c6be Author: Lyude Paul Date: Mon Nov 19 15:00:10 2018 +0000 drm/amd/dm: Don't forget to attach MST encoders commit c9e0ab86b2e03154bb898cd2f851827783224727 upstream. The change fixed huge delay in SST daisy chain and S3 soft hang observed in 4.19 kernel rebase. Regression point in drm: drm/fb-helper: Eliminate the .best_encoder() usage The aux sequence is altered due to the failure in drm_connector_for_each_possible_encoder(). The failure is caused by missing attached encoder in the process of adding MST connector.   drm_dp_send_enum_path_resources() aux transaction is pushed after mode probe, which causes conflict to drm_dp_mst_i2c_xfer(), leading to the transaction timeout. Signed-off-by: Lyude Paul Reviewed-by: Jerry (Fangzhi) Zuo Cc: Stable Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 94be4764b4bbcb49f2932e38c814a2ff32734487 Author: Sam Bobroff Date: Mon Nov 5 16:57:47 2018 +1100 drm/ast: Fix incorrect free on ioregs commit dc25ab067645eabd037f1a23d49a666f9e0b8c68 upstream. If the platform has no IO space, ioregs is placed next to the already allocated regs. In this case, it should not be separately freed. This prevents a kernel warning from __vunmap "Trying to vfree() nonexistent vm area" when unloading the driver. Fixes: 0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported") Signed-off-by: Sam Bobroff Cc: Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman commit 81f966235412fb541bc65007d37d2a3075b60ac3 Author: Steven Rostedt (VMware) Date: Thu Nov 29 08:50:27 2018 -0500 tracing/fgraph: Fix set_graph_function from showing interrupts commit 5cf99a0f3161bc3ae2391269d134d6bf7e26f00e upstream. The tracefs file set_graph_function is used to only function graph functions that are listed in that file (or all functions if the file is empty). The way this is implemented is that the function graph tracer looks at every function, and if the current depth is zero and the function matches something in the file then it will trace that function. When other functions are called, the depth will be greater than zero (because the original function will be at depth zero), and all functions will be traced where the depth is greater than zero. The issue is that when a function is first entered, and the handler that checks this logic is called, the depth is set to zero. If an interrupt comes in and a function in the interrupt handler is traced, its depth will be greater than zero and it will automatically be traced, even if the original function was not. But because the logic only looks at depth it may trace interrupts when it should not be. The recent design change of the function graph tracer to fix other bugs caused the depth to be zero while the function graph callback handler is being called for a longer time, widening the race of this happening. This bug was actually there for a longer time, but because the race window was so small it seldom happened. The Fixes tag below is for the commit that widen the race window, because that commit belongs to a series that will also help fix the original bug. Cc: stable@kernel.org Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack") Reported-by: Joe Lawrence Tested-by: Joe Lawrence Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit a990756426665b86baa14e23ff2de2c3f8243ff7 Author: Michael Guralnik Date: Wed Nov 21 15:03:54 2018 +0200 IB/mlx5: Avoid load failure due to unknown link width commit db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream. If the firmware reports a connection width that is not 1x, 4x, 8x or 12x it causes the driver to fail during initialization. To prevent this failure every time a new width is introduced to the RDMA stack, we will set a default 4x width for these widths which ar unknown to the driver. This is needed to allow to run old kernels with new firmware. Cc: # 4.1 Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode") Signed-off-by: Michael Guralnik Reviewed-by: Majd Dibbiny Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit a41e946e93806a7fae0a67af381230ae899f07ea Author: Dmitry V. Levin Date: Wed Nov 21 22:14:39 2018 +0300 mips: fix mips_get_syscall_arg o32 check commit c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream. When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should use the task specified as its argument instead of the current task. This potentially affects all syscall_get_arguments() users who specify tasks different from the current. Fixes: c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/21185/ Cc: Elvira Khabirova Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Greg Kroah-Hartman commit 8e847e8c745696fc403412d03382e51f8524758f Author: Mathias Kresin Date: Mon Nov 26 11:25:40 2018 +0100 MIPS: ralink: Fix mt7620 nd_sd pinmux commit 7d35baa4e9ec4b717bc0e58a39cdb6a1c50f5465 upstream. In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are configured as GPIOs. If they are blocked by the sd function, they can't be used as GPIOs. Reported-by: Kristian Evensen Signed-off-by: Mathias Kresin Signed-off-by: Paul Burton Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data") Patchwork: https://patchwork.linux-mips.org/patch/21220/ Cc: John Crispin Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Greg Kroah-Hartman commit d49297b5c77ae818f33b6ee63e418097e0ff98e8 Author: Zenghui Yu Date: Wed Nov 28 03:35:23 2018 +0000 tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique commit 0c7a52e4d4b5c4d35b31f3c3ad32af814f1bf491 upstream. After enabling KVM event tracing, almost all of trace_kvm_exit()'s printk shows "kvm_exit: IRQ: ..." even if the actual exception_type is NOT IRQ. More specifically, trace_kvm_exit() is defined in virt/kvm/arm/trace.h by TRACE_EVENT. This slight problem may have existed after commit e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU"). There are two variables in trace_kvm_exit() and __DO_TRACE() which have the same name, *idx*. Thus the actual value of *idx* will be overwritten when tracing. Fix it by adding a simple prefix. Cc: Joel Fernandes Cc: Wang Haibin Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Reviewed-by: Joel Fernandes (Google) Signed-off-by: Zenghui Yu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit fd8152818f11435557a18311603220d8bbdf7272 Author: Pavankumar Kondeti Date: Tue Oct 30 12:24:33 2018 +0530 sched, trace: Fix prev_state output in sched_switch tracepoint commit 3054426dc68e5d63aa6a6e9b91ac4ec78e3f3805 upstream. commit 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout") tried to fix the problem introduced by a previous commit efb40f588b43 ("sched/tracing: Fix trace_sched_switch task-state printing"). However the prev_state output in sched_switch is still broken. task_state_index() uses fls() which considers the LSB as 1. Left shifting 1 by this value gives an incorrect mapping to the task state. Fix this by decrementing the value returned by __get_task_state() before shifting. Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org Cc: stable@vger.kernel.org Fixes: 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout") Signed-off-by: Pavankumar Kondeti Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 2858d1891eb52cfd4f9b1ec2f4d44b1afcd3f529 Author: Masami Hiramatsu Date: Thu Nov 29 14:39:33 2018 +0900 arm64: ftrace: Fix to enable syscall events on arm64 commit 874bfc6e5422d2421f7e4d5ea318d30e91679dfe upstream. Since commit 4378a7d4be30 ("arm64: implement syscall wrappers") introduced "__arm64_" prefix to all syscall wrapper symbols in sys_call_table, syscall tracer can not find corresponding metadata from syscall name. In the result, we have no syscall ftrace events on arm64 kernel, and some bpf testcases are failed on arm64. To fix this issue, this introduces custom arch_syscall_match_sym_name() which skips first 8 bytes when comparing the syscall and symbol names. Fixes: 4378a7d4be30 ("arm64: implement syscall wrappers") Reported-by: Naresh Kamboju Signed-off-by: Masami Hiramatsu Acked-by: Will Deacon Tested-by: Naresh Kamboju Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman commit 86e42924160397148957ac80a588fe45fafcac6a Author: Frieder Schrempf Date: Tue Nov 27 07:44:52 2018 +0000 mtd: nand: Fix memory allocation in nanddev_bbt_init() commit 40b412897ccb4b98b2cfb2a0aaabed58dd9e2086 upstream. Fix the size of the buffer allocated to store the in-memory BBT. This bug was previously hidden by a different bug, that was fixed in commit d098093ba06e ("mtd: nand: Fix nanddev_neraseblocks()"). Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Cc: Signed-off-by: Frieder Schrempf Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit ac8edc62e8134aac60a0370ca1442f6e29a1feb9 Author: Andrea Parri Date: Thu Nov 22 17:10:31 2018 +0100 uprobes: Fix handle_swbp() vs. unregister() + register() race once more commit 09d3f015d1e1b4fee7e9bbdcf54201d239393391 upstream. Commit: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only. However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe(). Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations. Signed-off-by: Andrea Parri Acked-by: Oleg Nesterov Cc: Alexander Shishkin Cc: Andrew Morton Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: stable@kernel.org Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 61c963ab59fd7272bb752ea4099e5e64d9e452c5 Author: Sagi Grimberg Date: Wed Nov 14 10:17:01 2018 -0800 iser: set sector for ambiguous mr status errors commit 24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream. If for some reason we failed to query the mr status, we need to make sure to provide sufficient information for an ambiguous error (guard error on sector 0). Fixes: 0a7a08ad6f5f ("IB/iser: Implement check_protection") Cc: Reported-by: Dan Carpenter Signed-off-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 0448ad42d6a16c920035807422b4e0f1e00fd785 Author: Linus Torvalds Date: Fri Nov 30 14:45:01 2018 -0800 unifdef: use memcpy instead of strncpy commit 38c7b224ce22c25fed04007839edf974bd13439d upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning. Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit f2d12a0ba143056d14a916ddee701888c6532dc2 Author: Linus Torvalds Date: Fri Nov 30 12:13:15 2018 -0800 test_hexdump: use memcpy instead of strncpy commit b1286ed7158e9b62787508066283ab0b8850b518 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by: Andy Shevchenko Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 724ff9cbfe1f7a2adbab969f94ee9c2a2592a757 Author: Jens Axboe Date: Tue Dec 4 20:06:48 2018 -0700 blk-mq: fix corruption with direct issue commit ffe81d45322cc3cb140f0db080a4727ea284661e upstream. If we attempt a direct issue to a SCSI device, and it returns BUSY, then we queue the request up normally. However, the SCSI layer may have already setup SG tables etc for this particular command. If we later merge with this request, then the old tables are no longer valid. Once we issue the IO, we only read/write the original part of the request, not the new state of it. This causes data corruption, and is most often noticed with the file system complaining about the just read data being invalid: [ 235.934465] EXT4-fs error (device sda1): ext4_iget:4831: inode #7142: comm dpkg-query: bad extra_isize 24937 (inode size 256) because most of it is garbage... This doesn't happen from the normal issue path, as we will simply defer the request to the hardware queue dispatch list if we fail. Once it's on the dispatch list, we never merge with it. Fix this from the direct issue path by flagging the request as REQ_NOMERGE so we don't change the size of it before issue. See also: https://bugzilla.kernel.org/show_bug.cgi?id=201685 Tested-by: Guenter Roeck Fixes: 6ce3dd6eec1 ("blk-mq: issue directly if hw queue isn't busy in case of 'none'") Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman