patch-pre2.0.7 linux/arch/m68k/amiga/s3blit.h

Next file: linux/arch/m68k/amiga/zorro.c
Previous file: linux/arch/m68k/amiga/ksyms.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file pre2.0.6/linux/arch/m68k/amiga/s3blit.h linux/arch/m68k/amiga/s3blit.h
@@ -0,0 +1,74 @@
+/* s3 commands */
+#define S3_BITBLT       0xc011
+#define S3_TWOPOINTLINE 0x2811
+#define S3_FILLEDRECT   0x40b1
+
+#define S3_FIFO_EMPTY 0x0400
+#define S3_HDW_BUSY   0x0200
+
+/* Enhanced register mapping (MMIO mode) */
+
+#define S3_READ_SEL      0xbee8 /* offset f */
+#define S3_MULT_MISC     0xbee8 /* offset e */
+#define S3_ERR_TERM      0x92e8
+#define S3_FRGD_COLOR    0xa6e8
+#define S3_BKGD_COLOR    0xa2e8
+#define S3_PIXEL_CNTL    0xbee8 /* offset a */
+#define S3_FRGD_MIX      0xbae8
+#define S3_BKGD_MIX      0xb6e8
+#define S3_CUR_Y         0x82e8
+#define S3_CUR_X         0x86e8
+#define S3_DESTY_AXSTP   0x8ae8
+#define S3_DESTX_DIASTP  0x8ee8
+#define S3_MIN_AXIS_PCNT 0xbee8 /* offset 0 */
+#define S3_MAJ_AXIS_PCNT 0x96e8
+#define S3_CMD           0x9ae8
+#define S3_GP_STAT       0x9ae8
+#define S3_ADVFUNC_CNTL  0x4ae8
+#define S3_WRT_MASK      0xaae8
+#define S3_RD_MASK       0xaee8
+
+/* Enhanced register mapping (Packed MMIO mode, write only) */
+#define S3_ALT_CURXY     0x8100
+#define S3_ALT_CURXY2    0x8104
+#define S3_ALT_STEP      0x8108
+#define S3_ALT_STEP2     0x810c
+#define S3_ALT_ERR       0x8110
+#define S3_ALT_CMD       0x8118
+#define S3_ALT_MIX       0x8134
+#define S3_ALT_PCNT      0x8148
+#define S3_ALT_PAT       0x8168
+
+/* Drawing modes */
+#define S3_NOTCUR          0x0000
+#define S3_LOGICALZERO     0x0001
+#define S3_LOGICALONE      0x0002
+#define S3_LEAVEASIS       0x0003
+#define S3_NOTNEW          0x0004
+#define S3_CURXORNEW       0x0005
+#define S3_NOT_CURXORNEW   0x0006
+#define S3_NEW             0x0007
+#define S3_NOTCURORNOTNEW  0x0008
+#define S3_CURORNOTNEW     0x0009
+#define S3_NOTCURORNEW     0x000a
+#define S3_CURORNEW        0x000b
+#define S3_CURANDNEW       0x000c
+#define S3_NOTCURANDNEW    0x000d
+#define S3_CURANDNOTNEW    0x000e
+#define S3_NOTCURANDNOTNEW 0x000f
+
+#define S3_CRTC_ADR    0x03d4
+#define S3_CRTC_DATA   0x03d5
+
+#define S3_REG_LOCK2 0x39
+#define S3_HGC_MODE  0x45
+
+#define S3_HWGC_ORGX_H 0x46
+#define S3_HWGC_ORGX_L 0x47
+#define S3_HWGC_ORGY_H 0x48
+#define S3_HWGC_ORGY_L 0x49
+#define S3_HWGC_DX     0x4e
+#define S3_HWGC_DY     0x4f
+
+
+#define S3_LAW_CTL 0x58

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this