patch-2.1.27 linux/drivers/net/soundmodem/sm_sbc.c

Next file: linux/drivers/net/soundmodem/sm_wss.c
Previous file: linux/drivers/net/soundmodem/sm_hapn4800.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.1.26/linux/drivers/net/soundmodem/sm_sbc.c linux/drivers/net/soundmodem/sm_sbc.c
@@ -0,0 +1,525 @@
+/*****************************************************************************/
+
+/*
+ *	sm_sbc.h  -- soundcard radio modem driver soundblaster hardware driver
+ *
+ *	Copyright (C) 1996  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Please note that the GPL allows you to use the driver, NOT the radio.
+ *  In order to use the radio, you need a license from the communications
+ *  authority of your country.
+ *
+ */
+
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <linux/ioport.h>
+#include <linux/soundmodem.h>
+#include "sm.h"
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * currently this module is supposed to support both module styles, i.e.
+ * the old one present up to about 2.1.9, and the new one functioning
+ * starting with 2.1.21. The reason is I have a kit allowing to compile
+ * this module also under 2.0.x which was requested by several people.
+ * This will go in 2.2
+ */
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= 0x20100
+#include <asm/uaccess.h>
+#else
+#include <asm/segment.h>
+#include <linux/mm.h>
+
+#undef put_user
+#undef get_user
+
+#define put_user(x,ptr) ({ __put_user((unsigned long)(x),(ptr),sizeof(*(ptr))); 0; })
+#define get_user(x,ptr) ({ x = ((__typeof__(*(ptr)))__get_user((ptr),sizeof(*(ptr)))); 0; })
+
+extern inline int copy_from_user(void *to, const void *from, unsigned long n)
+{
+        int i = verify_area(VERIFY_READ, from, n);
+        if (i)
+                return i;
+        memcpy_fromfs(to, from, n);
+        return 0;
+}
+
+extern inline int copy_to_user(void *to, const void *from, unsigned long n)
+{
+        int i = verify_area(VERIFY_WRITE, to, n);
+        if (i)
+                return i;
+        memcpy_tofs(to, from, n);
+        return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+
+struct sc_state_sbc {
+	unsigned char revhi, revlo;
+	unsigned char fmt[2];
+	unsigned int dmabuflen;
+	unsigned char *dmabuf;
+	unsigned char dmabufidx;
+	unsigned char ptt;
+};
+
+#define SCSTATE ((struct sc_state_sbc *)(&sm->hw))
+
+/* --------------------------------------------------------------------- */
+/* 
+ * the sbc converter's registers 
+ */
+#define DSP_RESET(iobase)        (iobase+0x6)
+#define DSP_READ_DATA(iobase)    (iobase+0xa)
+#define DSP_WRITE_DATA(iobase)   (iobase+0xc)
+#define DSP_WRITE_STATUS(iobase) (iobase+0xc)
+#define DSP_DATA_AVAIL(iobase)   (iobase+0xe)
+#define DSP_MIXER_ADDR(iobase)   (iobase+0x4)
+#define DSP_MIXER_DATA(iobase)   (iobase+0x5)
+#define SBC_EXTENT               16
+
+/* --------------------------------------------------------------------- */
+/*
+ * SBC commands
+ */
+#define SBC_OUTPUT             0x14
+#define SBC_INPUT              0x24
+#define SBC_BLOCKSIZE          0x48
+#define SBC_HI_OUTPUT          0x91 
+#define SBC_HI_INPUT           0x99 
+#define SBC_LO_OUTPUT_AUTOINIT 0x1c
+#define SBC_LO_INPUT_AUTOINIT  0x2c
+#define SBC_HI_OUTPUT_AUTOINIT 0x90 
+#define SBC_HI_INPUT_AUTOINIT  0x98
+#define SBC_IMMED_INT          0xf2
+#define SBC_GET_REVISION       0xe1
+#define ESS_GET_REVISION       0xe7
+#define SBC_SPEAKER_ON         0xd1
+#define SBC_SPEAKER_OFF        0xd3
+#define SBC_DMA_ON             0xd0
+#define SBC_DMA_OFF            0xd4
+#define SBC_SAMPLE_RATE        0x40
+#define SBC_MONO_8BIT          0xa0
+#define SBC_MONO_16BIT         0xa4
+#define SBC_STEREO_8BIT        0xa8
+#define SBC_STEREO_16BIT       0xac
+
+#define SBC4_OUT8_AI           0xc6
+#define SBC4_IN8_AI            0xce
+#define SBC4_MODE_UNS_MONO     0x00
+
+/* --------------------------------------------------------------------- */
+
+static int inline reset_dsp(struct device *dev)
+{
+	int i;
+
+	outb(1, DSP_RESET(dev->base_addr));
+	for (i = 0; i < 0x100; i++)
+		SLOW_DOWN_IO;
+	outb(0, DSP_RESET(dev->base_addr));
+	for (i = 0; i < 0xffff; i++)
+		if (inb(DSP_DATA_AVAIL(dev->base_addr)) & 0x80)
+			if (inb(DSP_READ_DATA(dev->base_addr)) == 0xaa)
+				return 1;
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static void inline write_dsp(struct device *dev, unsigned char data)
+{
+	int i;
+	
+	for (i = 0; i < 0xffff; i++)
+		if (!(inb(DSP_WRITE_STATUS(dev->base_addr)) & 0x80)) {
+			outb(data, DSP_WRITE_DATA(dev->base_addr));
+			return;
+		}
+}
+
+/* --------------------------------------------------------------------- */
+
+static int inline read_dsp(struct device *dev, unsigned char *data)
+{
+	int i;
+
+	if (!data)
+		return 0;
+	for (i = 0; i < 0xffff; i++) 
+		if (inb(DSP_DATA_AVAIL(dev->base_addr)) & 0x80) {
+			*data = inb(DSP_READ_DATA(dev->base_addr));
+			return 1;
+		}
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static void inline sbc_int_ack(struct device *dev)
+{
+	inb(DSP_DATA_AVAIL(dev->base_addr));
+}
+
+/* --------------------------------------------------------------------- */
+
+static void setup_dma_dsp(struct device *dev, struct sm_state *sm, int send)
+{
+        unsigned long flags;
+        static const unsigned char sbcmode[2][2] = {
+		{ SBC_LO_INPUT_AUTOINIT, SBC_LO_OUTPUT_AUTOINIT }, 
+		{ SBC_HI_INPUT_AUTOINIT, SBC_HI_OUTPUT_AUTOINIT }
+	};
+	static const unsigned char sbc4mode[2] = { SBC4_IN8_AI, SBC4_OUT8_AI };
+        static const unsigned char dmamode[2] = { 
+		DMA_MODE_READ | DMA_MODE_AUTOINIT, DMA_MODE_WRITE  | DMA_MODE_AUTOINIT
+	};
+	static const unsigned char sbcskr[2] = { SBC_SPEAKER_OFF, SBC_SPEAKER_ON };
+	unsigned long dmabufaddr = virt_to_bus(SCSTATE->dmabuf);
+
+	send = !!send;
+        if (!reset_dsp(dev)) {
+                printk(KERN_ERR "%s: sbc: cannot reset sb dsp\n", sm_drvname);
+                return;
+        }
+        if ((dmabufaddr & 0xffff) + SCSTATE->dmabuflen > 0x10000)
+                panic("sm: DMA buffer violates DMA boundary!");
+        save_flags(flags);
+        cli();
+        sbc_int_ack(dev);
+        write_dsp(dev, SBC_SAMPLE_RATE); /* set sampling rate */
+        write_dsp(dev, SCSTATE->fmt[send]);
+        write_dsp(dev, sbcskr[send]); 
+        disable_dma(dev->dma);
+        clear_dma_ff(dev->dma);
+        set_dma_mode(dev->dma, dmamode[send]);
+        set_dma_addr(dev->dma, dmabufaddr);
+        set_dma_count(dev->dma, SCSTATE->dmabuflen);
+        enable_dma(dev->dma);
+        sbc_int_ack(dev);
+	if (SCSTATE->revhi >= 4) {
+		write_dsp(dev, sbc4mode[send]);
+		write_dsp(dev, SBC4_MODE_UNS_MONO);
+		write_dsp(dev, ((SCSTATE->dmabuflen >> 1) - 1) & 0xff);
+		write_dsp(dev, ((SCSTATE->dmabuflen >> 1) - 1) >> 8);
+	} else {
+		write_dsp(dev, SBC_BLOCKSIZE);
+		write_dsp(dev, ((SCSTATE->dmabuflen >> 1) - 1) & 0xff);
+		write_dsp(dev, ((SCSTATE->dmabuflen >> 1) - 1) >> 8);
+		write_dsp(dev, sbcmode[SCSTATE->fmt[send] >= 180][send]);
+		/* hispeed mode if sample rate > 13kHz */
+	}
+        restore_flags(flags);
+}
+
+/* --------------------------------------------------------------------- */
+
+static void sbc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct device *dev = (struct device *)dev_id;
+	struct sm_state *sm = (struct sm_state *)dev->priv;
+	unsigned char new_ptt;
+	unsigned char *buf;
+
+	if (!dev || !sm || sm->hdrv.magic != HDLCDRV_MAGIC)
+		return;
+	new_ptt = hdlcdrv_ptt(&sm->hdrv);
+ 	sbc_int_ack(dev);
+ 	buf = SCSTATE->dmabuf;
+	if (SCSTATE->dmabufidx)
+		buf += SCSTATE->dmabuflen/2;
+	SCSTATE->dmabufidx = !SCSTATE->dmabufidx;
+	sm_int_freq(sm);
+	sti();
+	if (new_ptt && !SCSTATE->ptt) {
+		/* starting to transmit */
+		disable_dma(dev->dma);
+ 		SCSTATE->dmabufidx = 0;
+		time_exec(sm->debug_vals.demod_cyc, 
+			  sm->mode_rx->demodulator(sm, buf, SCSTATE->dmabuflen/2));
+		time_exec(sm->debug_vals.mod_cyc, 
+			  sm->mode_tx->modulator(sm, SCSTATE->dmabuf, 
+						 SCSTATE->dmabuflen/2));
+ 		setup_dma_dsp(dev, sm, 1);
+		time_exec(sm->debug_vals.mod_cyc, 
+			  sm->mode_tx->modulator(sm, SCSTATE->dmabuf + 
+						 SCSTATE->dmabuflen/2,
+						 SCSTATE->dmabuflen/2));
+	} else if (SCSTATE->ptt == 1 && !new_ptt) {
+		/* stopping transmission */
+		disable_dma(dev->dma);
+ 		SCSTATE->dmabufidx = 0;
+		setup_dma_dsp(dev, sm, 0);
+		SCSTATE->ptt = 0;
+	} else if (SCSTATE->ptt) {
+                SCSTATE->ptt--;
+		time_exec(sm->debug_vals.mod_cyc, 
+			  sm->mode_tx->modulator(sm, buf, SCSTATE->dmabuflen/2));
+        } else {
+		time_exec(sm->debug_vals.demod_cyc, 
+			  sm->mode_rx->demodulator(sm, buf, SCSTATE->dmabuflen/2));
+		hdlcdrv_arbitrate(dev, &sm->hdrv);
+        }
+        if (new_ptt)
+                SCSTATE->ptt = 2;
+	sm_output_status(sm);
+	hdlcdrv_transmitter(dev, &sm->hdrv);
+	hdlcdrv_receiver(dev, &sm->hdrv);
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sbc_open(struct device *dev, struct sm_state *sm) 
+{
+	if (sizeof(sm->m) < sizeof(struct sc_state_sbc)) {
+		printk(KERN_ERR "sm sbc: sbc state too big: %d > %d\n", 
+		       sizeof(struct sc_state_sbc), sizeof(sm->m));
+		return -ENODEV;
+	}
+	if (!dev || !sm)
+		return -ENXIO;
+	if (dev->base_addr <= 0 || dev->base_addr > 0x1000-SBC_EXTENT || 
+	    dev->irq < 2 || dev->irq > 15 || dev->dma > 3)
+		return -ENXIO;
+	if (check_region(dev->base_addr, SBC_EXTENT))
+		return -EACCES;
+	/*
+	 * check if a card is available
+	 */
+	if (!reset_dsp(dev))
+		return -ENODEV;
+	write_dsp(dev, SBC_GET_REVISION);
+	if (!read_dsp(dev, &SCSTATE->revhi) || 
+	    !read_dsp(dev, &SCSTATE->revlo))
+		return -ENODEV;
+	if (SCSTATE->revhi < 2) {
+		printk(KERN_ERR "%s: your card is an antiquity, at least DSP "
+		       "rev 2.00 required\n", sm_drvname);
+		return -ENODEV;
+	}
+	if (SCSTATE->revhi < 3 && 
+	    (SCSTATE->fmt[0] >= 180 || SCSTATE->fmt[1] >= 180)) {
+		printk(KERN_ERR "%s: sbc io 0x%lx: DSP rev %d.%02d too "
+		       "old, at least 3.00 required\n", sm_drvname,
+		       dev->base_addr, SCSTATE->revhi, SCSTATE->revlo);
+		return -ENODEV;
+	}
+	/*
+	 * initialize some variables
+	 */
+	if (!(SCSTATE->dmabuf = kmalloc(SCSTATE->dmabuflen, GFP_KERNEL | GFP_DMA)))
+		return -ENOMEM;
+	SCSTATE->dmabufidx = SCSTATE->ptt = 0;
+
+	memset(&sm->m, 0, sizeof(sm->m));
+	memset(&sm->d, 0, sizeof(sm->d));
+	if (sm->mode_tx->init)
+		sm->mode_tx->init(sm);
+	if (sm->mode_rx->init)
+		sm->mode_rx->init(sm);
+
+	if (request_dma(dev->dma, sm->hwdrv->hw_name)) {
+		kfree_s(SCSTATE->dmabuf, SCSTATE->dmabuflen);
+		return -EBUSY;
+	}
+	if (request_irq(dev->irq, sbc_interrupt, SA_INTERRUPT, 
+			sm->hwdrv->hw_name, dev)) {
+		free_dma(dev->dma);
+		kfree_s(SCSTATE->dmabuf, SCSTATE->dmabuflen);
+		return -EBUSY;
+	}
+	request_region(dev->base_addr, SBC_EXTENT, sm->hwdrv->hw_name);
+	setup_dma_dsp(dev, sm, 0);
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sbc_close(struct device *dev, struct sm_state *sm) 
+{
+	if (!dev || !sm)
+		return -EINVAL;
+	/*
+	 * disable interrupts
+	 */
+	disable_dma(dev->dma);
+	reset_dsp(dev);	
+	free_irq(dev->irq, dev);	
+	free_dma(dev->dma);	
+	release_region(dev->base_addr, SBC_EXTENT);
+	kfree_s(SCSTATE->dmabuf, SCSTATE->dmabuflen);
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sbc_sethw(struct device *dev, struct sm_state *sm, char *mode)
+{
+	char *cp = strchr(mode, '.');
+	const struct modem_tx_info **mtp = sm_modem_tx_table;
+	const struct modem_rx_info **mrp;
+	int dv;
+
+	if (!strcmp(mode, "off")) {
+		sm->mode_tx = NULL;
+		sm->mode_rx = NULL;
+		return 0;
+	}
+	if (cp)
+		*cp++ = '\0';
+	else
+		cp = mode;
+	for (; *mtp; mtp++) {
+		if ((*mtp)->loc_storage > sizeof(sm->m)) {
+			printk(KERN_ERR "%s: insufficient storage for modulator %s (%d)\n",
+			       sm_drvname, (*mtp)->name, (*mtp)->loc_storage);
+			continue;
+		}
+		if (!(*mtp)->name || strcmp((*mtp)->name, mode))
+			continue;
+		if ((*mtp)->srate < 5000 || (*mtp)->srate > 44100)
+			continue;
+		for (mrp = sm_modem_rx_table; *mrp; mrp++) {
+			if ((*mrp)->loc_storage > sizeof(sm->d)) {
+				printk(KERN_ERR "%s: insufficient storage for demodulator %s (%d)\n",
+				       sm_drvname, (*mrp)->name, (*mrp)->loc_storage);
+				continue;
+			}
+			if ((*mrp)->name && !strcmp((*mrp)->name, cp) &&
+			    (*mrp)->srate >= 5000 && (*mrp)->srate <= 44100) {
+				sm->mode_tx = *mtp;
+				sm->mode_rx = *mrp;
+				SCSTATE->fmt[0] = 256-((1000000L+sm->mode_rx->srate/2)/
+							 sm->mode_rx->srate);
+				SCSTATE->fmt[1] = 256-((1000000L+sm->mode_tx->srate/2)/
+							 sm->mode_tx->srate);
+				dv = lcm(sm->mode_tx->dmabuflenmodulo, 
+					 sm->mode_rx->dmabuflenmodulo);
+				SCSTATE->dmabuflen = sm->mode_rx->srate/100+dv-1;
+				SCSTATE->dmabuflen /= dv;
+				SCSTATE->dmabuflen *= 2*dv; /* make sure DMA buf is even */
+				return 0;
+			}
+		}
+	}
+	return -EINVAL;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sbc_ioctl(struct device *dev, struct sm_state *sm, struct ifreq *ifr, 
+		     struct hdlcdrv_ioctl *hi, int cmd)
+{
+	struct sm_ioctl bi;
+	unsigned long flags;
+	int i;
+	
+	if (cmd != SIOCDEVPRIVATE)
+		return -ENOIOCTLCMD;
+
+	if (hi->cmd == HDLCDRVCTL_MODEMPARMASK)
+		return HDLCDRV_PARMASK_IOBASE | HDLCDRV_PARMASK_IRQ | 
+			HDLCDRV_PARMASK_DMA | HDLCDRV_PARMASK_SERIOBASE | 
+			HDLCDRV_PARMASK_PARIOBASE | HDLCDRV_PARMASK_MIDIIOBASE;
+
+	if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
+		return -EFAULT;
+
+	switch (bi.cmd) {
+	default:
+		return -ENOIOCTLCMD;
+
+	case SMCTL_GETMIXER:
+		i = 0;
+		bi.data.mix.sample_rate = sm->mode_rx->srate;
+		bi.data.mix.bit_rate = sm->hdrv.par.bitrate;
+		switch (SCSTATE->revhi) {
+		case 2:
+			bi.data.mix.mixer_type = SM_MIXER_CT1335;
+			break;
+		case 3:
+			bi.data.mix.mixer_type = SM_MIXER_CT1345;
+			break;
+		case 4:
+			bi.data.mix.mixer_type = SM_MIXER_CT1745;
+			break;
+		}
+		if (bi.data.mix.mixer_type != SM_MIXER_INVALID &&
+		    bi.data.mix.reg < 0x80) {
+			save_flags(flags);
+			cli();
+			outb(bi.data.mix.reg, DSP_MIXER_ADDR(dev->base_addr));
+			bi.data.mix.data = inb(DSP_MIXER_DATA(dev->base_addr));
+			restore_flags(flags);
+			i = 1;
+		}
+		if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+			return -EFAULT;
+		return i;
+		
+	case SMCTL_SETMIXER:
+		if (!suser())
+			return -EACCES;
+		switch (SCSTATE->revhi) {
+		case 2:
+			if (bi.data.mix.mixer_type != SM_MIXER_CT1335)
+				return -EINVAL;
+			break;
+		case 3:
+			if (bi.data.mix.mixer_type != SM_MIXER_CT1345)
+				return -EINVAL;
+			break;
+		case 4:
+			if (bi.data.mix.mixer_type != SM_MIXER_CT1745)
+				return -EINVAL;
+			break;
+		default:
+			return -ENODEV;
+		}
+		if (bi.data.mix.reg >= 0x80)
+			return -EACCES;
+		save_flags(flags);
+		cli();
+		outb(bi.data.mix.reg, DSP_MIXER_ADDR(dev->base_addr));
+		outb(bi.data.mix.data, DSP_MIXER_DATA(dev->base_addr));
+		restore_flags(flags);
+		return 0;
+		
+	}
+	if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+		return -EFAULT;
+	return 0;
+
+}
+
+/* --------------------------------------------------------------------- */
+
+const struct hardware_info sm_hw_sbc = {
+	"sbc", sizeof(struct sc_state_sbc), 
+	sbc_open, sbc_close, sbc_ioctl, sbc_sethw
+};
+
+/* --------------------------------------------------------------------- */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov