patch-2.2.10 linux/drivers/scsi/aic7xxx_reg.h

Next file: linux/drivers/scsi/aic7xxx_seq.c
Previous file: linux/drivers/scsi/aic7xxx_proc.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.9/linux/drivers/scsi/aic7xxx_reg.h linux/drivers/scsi/aic7xxx_reg.h
@@ -63,6 +63,16 @@
 
 #define	STCNT           		0x08
 
+#define	OPTIONMODE      		0x08
+#define		AUTORATEEN      	0x80
+#define		AUTOACKEN       	0x40
+#define		ATNMGMNTEN      	0x20
+#define		BUSFREEREV      	0x10
+#define		EXPPHASEDIS     	0x08
+#define		SCSIDATL_IMGEN  	0x04
+#define		AUTO_MSGOUT_DE  	0x02
+#define		DIS_MSGIN_DUALEDGE	0x01
+
 #define	CLRSINT0        		0x0b
 #define		CLRSELDO        	0x40
 #define		CLRSELDI        	0x20
@@ -102,8 +112,14 @@
 
 #define	SSTAT2          		0x0d
 #define		OVERRUN         	0x80
+#define		SHVALID         	0x40
+#define		WIDE_RES        	0x20
 #define		SFCNT           	0x1f
 #define		EXP_ACTIVE      	0x10
+#define		CRCVALERR       	0x08
+#define		CRCENDERR       	0x04
+#define		CRCREQERR       	0x02
+#define		DUAL_EDGE_ERROR 	0x01
 
 #define	SSTAT3          		0x0e
 #define		SCSICNT         	0xf0
@@ -412,6 +428,7 @@
 #define		DPARERR         	0x10
 #define		SQPARERR        	0x08
 #define		ILLOPCODE       	0x04
+#define		DSCTMOUT        	0x02
 #define		ILLSADDR        	0x02
 #define		ILLHADDR        	0x01
 
@@ -436,11 +453,30 @@
 
 #define	QINCNT          		0x9c
 
+#define	SCSIDATL_IMG    		0x9c
+
 #define	QOUTFIFO        		0x9d
 
+#define	CRCCONTROL1     		0x9d
+#define		CRCONSEEN       	0x80
+#define		TARGCRCCNTEN    	0x40
+#define		CRCVALCHKEN     	0x40
+#define		CRCENDCHKEN     	0x20
+#define		CRCREQCHKEN     	0x10
+#define		TARGCRCENDEN    	0x08
+
+#define	SCSIPHASE       		0x9e
+#define		SP_STATUS       	0x20
+#define		SP_COMMAND      	0x10
+#define		SP_MSG_IN       	0x08
+#define		SP_MSG_OUT      	0x04
+#define		SP_DATA_IN      	0x02
+#define		SP_DATA_OUT     	0x01
+
 #define	QOUTCNT         		0x9e
 
 #define	SFUNCT          		0x9f
+#define		ALT_MODE        	0x80
 
 #define	SCB_CONTROL     		0xa0
 #define		MK_MESSAGE      	0x80
@@ -525,14 +561,20 @@
 
 #define	HNSCB_QOFF      		0xf4
 
+#define	HESCB_QOFF      		0xf5
+
 #define	SNSCB_QOFF      		0xf6
 
+#define	SESCB_QOFF      		0xf7
+
 #define	SDSCB_QOFF      		0xf8
 
 #define	QOFF_CTLSTA     		0xfa
+#define		ESTABLISH_SCB_AVAIL	0x80
 #define		SCB_AVAIL       	0x40
 #define		SNSCB_ROLLOVER  	0x20
 #define		SDSCB_ROLLOVER  	0x10
+#define		SESCB_ROLLOVER  	0x08
 #define		SCB_QSIZE       	0x07
 #define		SCB_QSIZE_256   	0x06
 

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)