patch-2.2.10 linux/include/net/irda/smc-ircc.h

Next file: linux/include/net/irda/smc_ircc.h
Previous file: linux/include/net/irda/irvtd.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.9/linux/include/net/irda/smc-ircc.h linux/include/net/irda/smc-ircc.h
@@ -0,0 +1,160 @@
+/*********************************************************************
+ *                
+ * Filename:      smc.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Thomas Davis (tadavis@jps.net)
+ *
+ *     Copyright (c) 1998, 1999 Thomas Davis (tadavis@jps.net>
+ *     All Rights Reserved
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     I, Thomas Davis, admit no liability nor provide warranty for any
+ *     of this software. This material is provided "AS-IS" and at no charge.
+ *     
+ * Definitions for the SMC IrCC controller.
+ *
+ ********************************************************************/
+
+#ifndef SMC_IRCC_H
+#define SMC_IRCC_H
+
+#define UART_MASTER			0x07
+#define UART_MASTER_POWERDOWN	1<<7
+#define UART_MASTER_RESET		1<<6
+#define UART_MASTER_INT_EN		1<<5
+#define UART_MASTER_ERROR_RESET	1<<4
+
+/* Register block 0 */
+
+#define UART_IIR	0x01
+#define UART_IER	0x02
+#define UART_LSR	0x03
+#define UART_LCR_A	0x04
+#define UART_LCR_B	0x05
+#define UART_BSR	0x06
+
+#define UART_IIR_ACTIVE_FRAME	1<<7
+#define UART_IIR_EOM 		1<<6
+#define UART_IIR_RAW_MODE		1<<5
+#define UART_IIR_FIFO		1<<4
+
+#define UART_IER_ACTIVE_FRAME	1<<7
+#define UART_IER_EOM 		1<<6
+#define UART_IER_RAW_MODE		1<<5
+#define UART_IER_FIFO		1<<4
+
+#define UART_LSR_UNDERRUN		1<<7
+#define UART_LSR_OVERRUN		1<<6
+#define UART_LSR_FRAME_ERROR 	1<<5
+#define UART_LSR_SIZE_ERROR		1<<4
+#define UART_LSR_CRC_ERROR		1<<3
+#define UART_LSR_FRAME_ABORT 	1<<2
+
+#define UART_LCR_A_FIFO_RESET        1<<7
+#define UART_LCR_A_FAST              1<<6
+#define UART_LCR_A_GP_DATA           1<<5
+#define UART_LCR_A_RAW_TX            1<<4
+#define UART_LCR_A_RAW_RX            1<<3
+#define UART_LCR_A_ABORT             1<<2
+#define UART_LCR_A_DATA_DONE         1<<1
+
+#define UART_LCR_B_SCE_DISABLED 	0x00<<6
+#define UART_LCR_B_SCE_TRANSMIT 	0x01<<6
+#define UART_LCR_B_SCE_RECEIVE		0x02<<6
+#define UART_LCR_B_SCE_UNDEFINED	0x03<<6
+#define UART_LCR_B_SIP_ENABLE		1<<5
+#define UART_LCR_B_BRICK_WALL		1<<4
+
+#define UART_BSR_NOT_EMPTY	1<<7
+#define UART_BSR_FIFO_FULL	1<<6
+#define UART_BSR_TIMEOUT	1<<5
+
+/* Register block 1 */
+
+#define UART_SCE_CFGA	0x00
+#define UART_SCE_CFGB	0x01
+#define UART_FIFO_THRESHOLD	0x02
+
+#define UART_CFGA_AUX_IR		0x01<<7
+#define UART_CFGA_HALF_DUPLEX	0x01<<2
+#define UART_CFGA_TX_POLARITY	0x01<<1
+#define UART_CFGA_RX_POLARITY	0x01
+
+#define UART_CFGA_COM		0x00<<3
+#define UART_CFGA_IRDA_SIR_A	0x01<<3
+#define UART_CFGA_ASK_SIR		0x02<<3
+#define UART_CFGA_IRDA_SIR_B	0x03<<3
+#define UART_CFGA_IRDA_HDLC 	0x04<<3
+#define UART_CFGA_IRDA_4PPM 	0x05<<3
+#define UART_CFGA_CONSUMER		0x06<<3
+#define UART_CFGA_RAW_IR		0x07<<3
+#define UART_CFGA_OTHER		0x08<<3
+
+#define UART_IR_HDLC			0x04
+#define UART_IR_4PPM			0x01
+#define UART_IR_CONSUMER		0x02
+
+#define UART_CFGB_LOOPBACK		0x01<<5
+#define UART_CFGB_LPBCK_TX_CRC	0x01<<4
+#define UART_CFGB_NOWAIT		0x01<<3
+#define UART_CFGB_STRING_MOVE	0x01<<2
+#define UART_CFGB_DMA_BURST 	0x01<<1
+#define UART_CFGB_DMA_ENABLE	0x01
+
+#define UART_CFGB_COM		0x00<<6
+#define UART_CFGB_IR		0x01<<6
+#define UART_CFGB_AUX		0x02<<6
+#define UART_CFGB_INACTIVE		0x03<<6
+
+/* Register block 2 - Consumer IR - not used */
+
+/* Register block 3 - Identification Registers! */
+
+#define UART_ID_HIGH	0x00   /* 0x10 */
+#define UART_ID_LOW	0x01   /* 0xB8 */
+#define UART_CHIP_ID 	0x02   /* 0xF1 */
+#define UART_VERSION	0x03   /* 0x01 */
+#define UART_INTERFACE	0x04   /* low 4 = DMA, high 4 = IRQ */
+
+/* Register block 4 - IrDA */
+#define UART_CONTROL        0x00
+#define UART_BOF_COUNT_LO      0x01
+#define UART_BRICKWALL_CNT_LO 0x02
+#define UART_BRICKWALL_TX_CNT_HI   0x03
+#define UART_TX_SIZE_LO   0x04
+#define UART_RX_SIZE_HI   0x05
+#define UART_RX_SIZE_LO   0x06
+
+#define UART_1152     0x01<<7
+#define UART_CRC      0x01<<6
+
+/* For storing entries in the status FIFO */
+struct st_fifo_entry {
+	int status;
+	int len;
+};
+
+struct st_fifo {
+	struct st_fifo_entry entries[10];
+	int head;
+	int tail;
+	int len;
+};
+
+/* Private data for each instance */
+struct ircc_cb {
+	struct st_fifo st_fifo;
+
+	int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
+	int tx_len;          /* Number of frames in tx_buff */
+
+	struct irda_device idev;
+};
+
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)