patch-2.3.15 linux/drivers/net/sb1000.c

Next file: linux/drivers/net/shaper.c
Previous file: linux/drivers/net/ppp_async.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.14/linux/drivers/net/sb1000.c linux/drivers/net/sb1000.c
@@ -0,0 +1,1293 @@
+/* sb1000.c: A General Instruments SB1000 driver for linux. */
+/*
+	Written 1998 by Franco Venturi.
+
+	Copyright 1998 by Franco Venturi.
+	Copyright 1994,1995 by Donald Becker.
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.
+
+	This driver is for the General Instruments SB1000 (internal SURFboard)
+
+	The author may be reached as fventuri@mediaone.net
+
+	This program is free software; you can redistribute it
+	and/or  modify it under  the terms of  the GNU General
+	Public  License as  published  by  the  Free  Software
+	Foundation;  either  version 2 of the License, or  (at
+	your option) any later version.
+
+	Changes:
+
+	981115 Steven Hirsch <shirsch@adelphia.net>
+
+	Linus changed the timer interface.  Should work on all recent
+	development kernels.
+
+	980608 Steven Hirsch <shirsch@adelphia.net>
+
+	Small changes to make it work with 2.1.x kernels. Hopefully,
+	nothing major will change before official release of Linux 2.2.
+	
+	Merged with 2.2 - Alan Cox
+*/
+
+static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n";
+
+#include <linux/module.h>
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/malloc.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>	/* for udelay() */
+#include <asm/processor.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/etherdevice.h>
+
+/* for SIOGCM/SIOSCM stuff */
+#include <linux/if_cablemodem.h>
+
+#ifdef SB1000_DEBUG
+int sb1000_debug = SB1000_DEBUG;
+#else
+int sb1000_debug = 1;
+#endif
+
+static const int SB1000_IO_EXTENT = 8;
+/* SB1000 Maximum Receive Unit */
+static const int SB1000_MRU = 1500; /* octects */
+
+#define NPIDS 4
+struct sb1000_private {
+	struct sk_buff *rx_skb[NPIDS];
+	short rx_dlen[NPIDS];
+	unsigned int rx_bytes;
+	unsigned int rx_frames;
+	short rx_error_count;
+	short rx_error_dpc_count;
+	unsigned char rx_session_id[NPIDS];
+	unsigned char rx_frame_id[NPIDS];
+	unsigned char rx_pkt_type[NPIDS];
+	struct net_device_stats stats;
+};
+
+/* prototypes for Linux interface */
+extern int sb1000_probe(struct net_device *dev);
+static int sb1000_open(struct net_device *dev);
+static int sb1000_dev_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd);
+static int sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void sb1000_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct enet_statistics *sb1000_stats(struct net_device *dev);
+static int sb1000_close(struct net_device *dev);
+
+/* Plug-n-Play routine */
+static inline unsigned char read_resource_data(void);
+
+/* SB1000 hardware routines to be used during open/configuration phases */
+static inline void nicedelay(unsigned long usecs);
+static inline int card_wait_for_busy_clear(const int ioaddr[],
+	const char* name);
+static inline int card_wait_for_ready(const int ioaddr[], const char* name,
+	unsigned char in[]);
+static inline int card_send_command(const int ioaddr[], const char* name,
+	const unsigned char out[], unsigned char in[]);
+
+/* SB1000 hardware routines to be used during frame rx interrupt */
+static inline int sb1000_wait_for_ready(const int ioaddr[], const char* name);
+static inline int sb1000_wait_for_ready_clear(const int ioaddr[],
+	const char* name);
+static inline void sb1000_send_command(const int ioaddr[], const char* name,
+	const unsigned char out[]);
+static inline void sb1000_read_status(const int ioaddr[], unsigned char in[]);
+static inline void sb1000_issue_read_command(const int ioaddr[],
+	const char* name);
+
+/* SB1000 commands for open/configuration */
+static inline int sb1000_reset(const int ioaddr[], const char* name);
+static inline int sb1000_check_CRC(const int ioaddr[], const char* name);
+static inline int sb1000_start_get_set_command(const int ioaddr[],
+	const char* name);
+static inline int sb1000_end_get_set_command(const int ioaddr[],
+	const char* name);
+static inline int sb1000_activate(const int ioaddr[], const char* name);
+static inline int sb1000_get_firmware_version(const int ioaddr[],
+	const char* name, unsigned char version[], int do_end);
+static inline int sb1000_get_frequency(const int ioaddr[], const char* name,
+	int* frequency);
+static inline int sb1000_set_frequency(const int ioaddr[], const char* name,
+	int frequency);
+static inline int sb1000_get_PIDs(const int ioaddr[], const char* name,
+	short PID[]);
+static inline int sb1000_set_PIDs(const int ioaddr[], const char* name,
+	const short PID[]);
+
+/* SB1000 commands for frame rx interrupt */
+static inline int sb1000_rx(struct net_device *dev);
+static inline void sb1000_error_dpc(struct net_device *dev);
+
+
+/* Plug-n-Play constants */
+static const int READ_DATA_PORT = 0x203;	/* This port number may change!!! */
+static const int ADDRESS_PORT = 0x279;
+static const int WRITE_DATA_PORT = 0xa79;
+
+/* Plug-n-Play read resource mechanism */
+static inline unsigned char
+read_resource_data(void) {
+	/* poll */
+	outb(0x05, ADDRESS_PORT);	/* Select PnP status register. */
+	while (!(inb(READ_DATA_PORT) & 0x1)) ;
+	/* read resource data */
+	outb(0x04, ADDRESS_PORT);	/* Select PnP resource data register. */
+	return inb(READ_DATA_PORT);
+}
+
+/* probe for SB1000 using Plug-n-Play mechanism */
+int
+sb1000_probe(struct net_device *dev)
+{
+
+	unsigned short ioaddr[2], irq;
+	short i, csn;
+	unsigned int serial_number;
+
+	const unsigned char initiation_key[] = { 0x00, 0x00, 0x6a, 0xb5, 0xda,
+		0xed, 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b, 0x0d,
+		0x86, 0xc3, 0x61, 0xb0, 0x58, 0x2c, 0x16, 0x8b, 0x45, 0xa2,
+		0xd1, 0xe8, 0x74, 0x3a, 0x9d, 0xce, 0xe7, 0x73, 0x39 }; 
+	const unsigned char sb1000_vendor_ID[] = {
+		0x1d, 0x23, 0x10, 0x00 };		/* "GIC1000" */
+
+	/* Reset the ISA PnP mechanism */
+	outb(0x02, ADDRESS_PORT);		/* Select PnP config control register. */
+	outb(0x02, WRITE_DATA_PORT);	/* Return to WaitForKey state. */
+
+	/* send initiation key */
+	for (i = 0; i < sizeof(initiation_key) / sizeof(initiation_key[0]); i++) {
+		outb(initiation_key[i], ADDRESS_PORT);
+	}
+
+	/* set card CSN into configuration mode */
+	for (csn = 1; csn <= 255; csn++) {
+		outb(0x03, ADDRESS_PORT);	/* Select PnP wake[CSN] register. */
+		outb(csn, WRITE_DATA_PORT);	/* Wake[CSN] */
+		/* check card ID */
+		for (i = 0; i < 4; i++) {
+			if (read_resource_data() != sb1000_vendor_ID[i]) break;
+		}
+		if (i == 4) break;
+	}
+
+	/* SB1000 not found */
+	if (csn > 255) {
+		/* return to WaitForKey state */
+		outb(0x02, ADDRESS_PORT);	/* Select PnP config control register. */
+		outb(0x02, WRITE_DATA_PORT);/* Return to WaitForKey state. */
+		return -ENODEV;
+	}
+
+	/* found: get serial number and skip checksum */
+	serial_number = 0;
+	for (i = 0; i < 4; i++) {
+		serial_number |= read_resource_data() << (8 * i);
+	}
+	read_resource_data();
+
+	/* get I/O port base address */
+	outb(0x60, ADDRESS_PORT);		/* Select PnP I/O port base address 0. */
+	ioaddr[0] = inb(READ_DATA_PORT) << 8;
+	outb(0x61, ADDRESS_PORT);
+	ioaddr[0] |= inb(READ_DATA_PORT);
+	outb(0x62, ADDRESS_PORT);		/* Select PnP I/O port base address 1. */
+	ioaddr[1] = inb(READ_DATA_PORT) << 8;
+	outb(0x63, ADDRESS_PORT);
+	ioaddr[1] |= inb(READ_DATA_PORT);
+
+	/* get IRQ */
+	outb(0x70, ADDRESS_PORT);		/* Select PnP IRQ level select 0. */
+	irq = inb(READ_DATA_PORT);
+
+	/* return to WaitForKey state */
+	outb(0x02, ADDRESS_PORT);		/* Select PnP config control register. */
+	outb(0x02, WRITE_DATA_PORT);	/* Return to WaitForKey state. */
+
+	/* check I/O base and IRQ */
+	if (dev->base_addr != 0 && dev->base_addr != ioaddr[0]) {
+		return -ENODEV;
+	}
+	if (dev->rmem_end != 0 && dev->rmem_end != ioaddr[1]) {
+		return -ENODEV;
+	}
+	if (dev->irq != 0 && dev->irq != irq) {
+		return -ENODEV;
+	}
+
+	dev->base_addr = ioaddr[0];
+	/* rmem_end holds the second I/O address - fv */
+	dev->rmem_end = ioaddr[1];
+	dev->irq = irq;
+
+	if (sb1000_debug > 0)
+		printk(KERN_NOTICE "%s: sb1000 at (%#3.3lx,%#3.3lx), csn %d, "
+			"S/N %#8.8x, IRQ %d.\n", dev->name, dev->base_addr,
+			dev->rmem_end, csn, serial_number, dev->irq);
+
+	dev = init_etherdev(dev, 0);
+
+	/* Make up a SB1000-specific-data structure. */
+	dev->priv = kmalloc(sizeof(struct sb1000_private), GFP_KERNEL);
+	if (dev->priv == NULL)
+		return -ENOMEM;
+	memset(dev->priv, 0, sizeof(struct sb1000_private));
+
+	if (sb1000_debug > 0)
+		printk(KERN_NOTICE "%s", version);
+
+	/* The SB1000-specific entries in the device structure. */
+	dev->open = sb1000_open;
+	dev->do_ioctl = sb1000_dev_ioctl;
+	dev->hard_start_xmit = sb1000_start_xmit;
+	dev->stop = sb1000_close;
+	dev->get_stats = sb1000_stats;
+
+	/* Fill in the generic fields of the device structure. */
+	dev->change_mtu		= NULL;
+	dev->hard_header	= NULL;
+	dev->rebuild_header 	= NULL;
+	dev->set_mac_address 	= NULL;
+	dev->header_cache_update= NULL;
+
+	dev->type		= ARPHRD_ETHER;
+	dev->hard_header_len 	= 0;
+	dev->mtu		= 1500;
+	dev->addr_len		= ETH_ALEN;
+	/* hardware address is 0:0:serial_number */
+	dev->dev_addr[0] = 0;
+	dev->dev_addr[1] = 0;
+	dev->dev_addr[2] = serial_number >> 24 & 0xff;
+	dev->dev_addr[3] = serial_number >> 16 & 0xff;
+	dev->dev_addr[4] = serial_number >>  8 & 0xff;
+	dev->dev_addr[5] = serial_number >>  0 & 0xff;
+	dev->tx_queue_len	= 0;
+	
+	/* New-style flags. */
+	dev->flags		= IFF_POINTOPOINT|IFF_NOARP;
+	return 0;
+}
+
+
+/*
+ * SB1000 hardware routines to be used during open/configuration phases
+ */
+const int TimeOutJiffies = (int)(8.75 * HZ);
+
+static inline void nicedelay(unsigned long usecs)
+{
+	current->state = TASK_INTERRUPTIBLE;
+	schedule_timeout(HZ);
+	return;
+}
+
+/* Card Wait For Busy Clear (cannot be used during an interrupt) */
+static inline int
+card_wait_for_busy_clear(const int ioaddr[], const char* name)
+{
+	unsigned char a;
+	unsigned long timeout;
+
+	a = inb(ioaddr[0] + 7);
+	timeout = jiffies + TimeOutJiffies;
+	while (a & 0x80 || a & 0x40) {
+		/* a little sleep */
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(0);
+		a = inb(ioaddr[0] + 7);
+		if (jiffies >= timeout) {
+			printk(KERN_WARNING "%s: card_wait_for_busy_clear timeout\n",
+				name);
+			return -ETIME;
+		}
+	}
+
+	return 0;
+}
+
+/* Card Wait For Ready (cannot be used during an interrupt) */
+static inline int
+card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
+{
+	unsigned char a;
+	unsigned long timeout;
+
+	a = inb(ioaddr[1] + 6);
+	timeout = jiffies + TimeOutJiffies;
+	while (a & 0x80 || !(a & 0x40)) {
+		/* a little sleep */
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(0);
+		a = inb(ioaddr[1] + 6);
+		if (jiffies >= timeout) {
+			printk(KERN_WARNING "%s: card_wait_for_ready timeout\n",
+				name);
+			return -ETIME;
+		}
+	}
+
+	in[1] = inb(ioaddr[0] + 1);
+	in[2] = inb(ioaddr[0] + 2);
+	in[3] = inb(ioaddr[0] + 3);
+	in[4] = inb(ioaddr[0] + 4);
+	in[0] = inb(ioaddr[0] + 5);
+	in[6] = inb(ioaddr[0] + 6);
+	in[5] = inb(ioaddr[1] + 6);
+	return 0;
+}
+
+/* Card Send Command (cannot be used during an interrupt) */
+static inline int
+card_send_command(const int ioaddr[], const char* name,
+	const unsigned char out[], unsigned char in[])
+{
+	int status, x;
+
+	if ((status = card_wait_for_busy_clear(ioaddr, name)))
+		return status;
+	outb(0xa0, ioaddr[0] + 6);
+	outb(out[2], ioaddr[0] + 1);
+	outb(out[3], ioaddr[0] + 2);
+	outb(out[4], ioaddr[0] + 3);
+	outb(out[5], ioaddr[0] + 4);
+	outb(out[1], ioaddr[0] + 5);
+	outb(0xa0, ioaddr[0] + 6);
+	outb(out[0], ioaddr[0] + 7);
+	if (out[0] != 0x20 && out[0] != 0x30) {
+		if ((status = card_wait_for_ready(ioaddr, name, in)))
+			return status;
+		inb(ioaddr[0] + 7);
+		if (sb1000_debug > 3)
+			printk(KERN_DEBUG "%s: card_send_command "
+				"out: %02x%02x%02x%02x%02x%02x  "
+				"in: %02x%02x%02x%02x%02x%02x%02x\n", name,
+				out[0], out[1], out[2], out[3], out[4], out[5],
+				in[0], in[1], in[2], in[3], in[4], in[5], in[6]);
+	} else {
+		if (sb1000_debug > 3)
+			printk(KERN_DEBUG "%s: card_send_command "
+				"out: %02x%02x%02x%02x%02x%02x\n", name,
+				out[0], out[1], out[2], out[3], out[4], out[5]);
+	}
+
+	if (out[1] == 0x1b) {
+		x = (out[2] == 0x02);
+	} else {
+		if (out[0] >= 0x80 && in[0] != (out[1] | 0x80))
+			return -EIO;
+	}
+	return 0;
+}
+
+
+/*
+ * SB1000 hardware routines to be used during frame rx interrupt
+ */
+const int Sb1000TimeOutJiffies = 7 * HZ;
+
+/* Card Wait For Ready (to be used during frame rx) */
+static inline int
+sb1000_wait_for_ready(const int ioaddr[], const char* name)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + Sb1000TimeOutJiffies;
+	while (inb(ioaddr[1] + 6) & 0x80) {
+		if (jiffies >= timeout) {
+			printk(KERN_WARNING "%s: sb1000_wait_for_ready timeout\n",
+				name);
+			return -ETIME;
+		}
+	}
+	timeout = jiffies + Sb1000TimeOutJiffies;
+	while (!(inb(ioaddr[1] + 6) & 0x40)) {
+		if (jiffies >= timeout) {
+			printk(KERN_WARNING "%s: sb1000_wait_for_ready timeout\n",
+				name);
+			return -ETIME;
+		}
+	}
+	inb(ioaddr[0] + 7);
+	return 0;
+}
+
+/* Card Wait For Ready Clear (to be used during frame rx) */
+static inline int
+sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + Sb1000TimeOutJiffies;
+	while (inb(ioaddr[1] + 6) & 0x80) {
+		if (jiffies >= timeout) {
+			printk(KERN_WARNING "%s: sb1000_wait_for_ready_clear timeout\n",
+				name);
+			return -ETIME;
+		}
+	}
+	timeout = jiffies + Sb1000TimeOutJiffies;
+	while (inb(ioaddr[1] + 6) & 0x40) {
+		if (jiffies >= timeout) {
+			printk(KERN_WARNING "%s: sb1000_wait_for_ready_clear timeout\n",
+				name);
+			return -ETIME;
+		}
+	}
+	return 0;
+}
+
+/* Card Send Command (to be used during frame rx) */
+static inline void
+sb1000_send_command(const int ioaddr[], const char* name,
+	const unsigned char out[])
+{
+	outb(out[2], ioaddr[0] + 1);
+	outb(out[3], ioaddr[0] + 2);
+	outb(out[4], ioaddr[0] + 3);
+	outb(out[5], ioaddr[0] + 4);
+	outb(out[1], ioaddr[0] + 5);
+	outb(out[0], ioaddr[0] + 7);
+	if (sb1000_debug > 3)
+		printk(KERN_DEBUG "%s: sb1000_send_command out: %02x%02x%02x%02x"
+			"%02x%02x\n", name, out[0], out[1], out[2], out[3], out[4], out[5]);
+	return;
+}
+
+/* Card Read Status (to be used during frame rx) */
+static inline void
+sb1000_read_status(const int ioaddr[], unsigned char in[])
+{
+	in[1] = inb(ioaddr[0] + 1);
+	in[2] = inb(ioaddr[0] + 2);
+	in[3] = inb(ioaddr[0] + 3);
+	in[4] = inb(ioaddr[0] + 4);
+	in[0] = inb(ioaddr[0] + 5);
+	return;
+}
+
+/* Issue Read Command (to be used during frame rx) */
+static inline void
+sb1000_issue_read_command(const int ioaddr[], const char* name)
+{
+	const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
+
+	sb1000_wait_for_ready_clear(ioaddr, name);
+	outb(0xa0, ioaddr[0] + 6);
+	sb1000_send_command(ioaddr, name, Command0);
+	return;
+}
+
+
+/*
+ * SB1000 commands for open/configuration
+ */
+/* reset SB1000 card */
+static inline int
+sb1000_reset(const int ioaddr[], const char* name)
+{
+	unsigned char st[7];
+	int port, status;
+	const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
+
+	port = ioaddr[1] + 6;
+	outb(0x4, port);
+	inb(port);
+	udelay(1000);
+	outb(0x0, port);
+	inb(port);
+	nicedelay(60000);
+	outb(0x4, port);
+	inb(port);
+	udelay(1000);
+	outb(0x0, port);
+	inb(port);
+	udelay(0);
+
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	if (st[3] != 0xf0)
+		return -EIO;
+	return 0;
+}
+
+/* check SB1000 firmware CRC */
+static inline int
+sb1000_check_CRC(const int ioaddr[], const char* name)
+{
+	unsigned char st[7];
+	int crc, status;
+	const unsigned char Command0[6] = {0x80, 0x1f, 0x00, 0x00, 0x00, 0x00};
+
+	/* check CRC */
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	if (st[1] != st[3] || st[2] != st[4])
+		return -EIO;
+	crc = st[1] << 8 | st[2];
+	return 0;
+}
+
+static inline int
+sb1000_start_get_set_command(const int ioaddr[], const char* name)
+{
+	unsigned char st[7];
+	const unsigned char Command0[6] = {0x80, 0x1b, 0x00, 0x00, 0x00, 0x00};
+
+	return card_send_command(ioaddr, name, Command0, st);
+}
+
+static inline int
+sb1000_end_get_set_command(const int ioaddr[], const char* name)
+{
+	unsigned char st[7];
+	int status;
+	const unsigned char Command0[6] = {0x80, 0x1b, 0x02, 0x00, 0x00, 0x00};
+	const unsigned char Command1[6] = {0x20, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	return card_send_command(ioaddr, name, Command1, st);
+}
+
+static inline int
+sb1000_activate(const int ioaddr[], const char* name)
+{
+	unsigned char st[7];
+	int status;
+	const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00};
+	const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
+
+	nicedelay(50000);
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	if ((status = card_send_command(ioaddr, name, Command1, st)))
+		return status;
+	if (st[3] != 0xf1) {
+    	if ((status = sb1000_start_get_set_command(ioaddr, name)))
+			return status;
+		return -EIO;
+	}
+	udelay(1000);
+    return sb1000_start_get_set_command(ioaddr, name);
+}
+
+/* get SB1000 firmware version */
+static inline int
+sb1000_get_firmware_version(const int ioaddr[], const char* name,
+	unsigned char version[], int do_end)
+{
+	unsigned char st[7];
+	int status;
+	const unsigned char Command0[6] = {0x80, 0x23, 0x00, 0x00, 0x00, 0x00};
+
+	if ((status = sb1000_start_get_set_command(ioaddr, name)))
+		return status;
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	if (st[0] != 0xa3)
+		return -EIO;
+	version[0] = st[1];
+	version[1] = st[2];
+	if (do_end)
+		return sb1000_end_get_set_command(ioaddr, name);
+	else
+		return 0;
+}
+
+/* get SB1000 frequency */
+static inline int
+sb1000_get_frequency(const int ioaddr[], const char* name, int* frequency)
+{
+	unsigned char st[7];
+	int status;
+	const unsigned char Command0[6] = {0x80, 0x44, 0x00, 0x00, 0x00, 0x00};
+
+	udelay(1000);
+	if ((status = sb1000_start_get_set_command(ioaddr, name)))
+		return status;
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	*frequency = ((st[1] << 8 | st[2]) << 8 | st[3]) << 8 | st[4];
+	return sb1000_end_get_set_command(ioaddr, name);
+}
+
+/* set SB1000 frequency */
+static inline int
+sb1000_set_frequency(const int ioaddr[], const char* name, int frequency)
+{
+	unsigned char st[7];
+	int status;
+	unsigned char Command0[6] = {0x80, 0x29, 0x00, 0x00, 0x00, 0x00};
+
+	const int FrequencyLowerLimit = 57000;
+	const int FrequencyUpperLimit = 804000;
+
+	if (frequency < FrequencyLowerLimit || frequency > FrequencyUpperLimit) {
+		printk(KERN_ERR "%s: frequency chosen (%d kHz) is not in the range "
+			"[%d,%d] kHz\n", name, frequency, FrequencyLowerLimit,
+			FrequencyUpperLimit);
+		return -EINVAL;
+	}
+	udelay(1000);
+	if ((status = sb1000_start_get_set_command(ioaddr, name)))
+		return status;
+	Command0[5] = frequency & 0xff;
+	frequency >>= 8;
+	Command0[4] = frequency & 0xff;
+	frequency >>= 8;
+	Command0[3] = frequency & 0xff;
+	frequency >>= 8;
+	Command0[2] = frequency & 0xff;
+	return card_send_command(ioaddr, name, Command0, st);
+}
+
+/* get SB1000 PIDs */
+static inline int
+sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
+{
+	unsigned char st[7];
+	int status;
+	const unsigned char Command0[6] = {0x80, 0x40, 0x00, 0x00, 0x00, 0x00};
+	const unsigned char Command1[6] = {0x80, 0x41, 0x00, 0x00, 0x00, 0x00};
+	const unsigned char Command2[6] = {0x80, 0x42, 0x00, 0x00, 0x00, 0x00};
+	const unsigned char Command3[6] = {0x80, 0x43, 0x00, 0x00, 0x00, 0x00};
+
+	udelay(1000);
+	if ((status = sb1000_start_get_set_command(ioaddr, name)))
+		return status;
+
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+	PID[0] = st[1] << 8 | st[2];
+
+	if ((status = card_send_command(ioaddr, name, Command1, st)))
+		return status;
+	PID[1] = st[1] << 8 | st[2];
+
+	if ((status = card_send_command(ioaddr, name, Command2, st)))
+		return status;
+	PID[2] = st[1] << 8 | st[2];
+
+	if ((status = card_send_command(ioaddr, name, Command3, st)))
+		return status;
+	PID[3] = st[1] << 8 | st[2];
+
+	return sb1000_end_get_set_command(ioaddr, name);
+}
+
+/* set SB1000 PIDs */
+static inline int
+sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
+{
+	unsigned char st[7];
+	short p;
+	int status;
+	unsigned char Command0[6] = {0x80, 0x31, 0x00, 0x00, 0x00, 0x00};
+	unsigned char Command1[6] = {0x80, 0x32, 0x00, 0x00, 0x00, 0x00};
+	unsigned char Command2[6] = {0x80, 0x33, 0x00, 0x00, 0x00, 0x00};
+	unsigned char Command3[6] = {0x80, 0x34, 0x00, 0x00, 0x00, 0x00};
+	const unsigned char Command4[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
+
+	udelay(1000);
+	if ((status = sb1000_start_get_set_command(ioaddr, name)))
+		return status;
+
+	p = PID[0];
+	Command0[3] = p & 0xff;
+	p >>= 8;
+	Command0[2] = p & 0xff;
+	if ((status = card_send_command(ioaddr, name, Command0, st)))
+		return status;
+
+	p = PID[1];
+	Command1[3] = p & 0xff;
+	p >>= 8;
+	Command1[2] = p & 0xff;
+	if ((status = card_send_command(ioaddr, name, Command1, st)))
+		return status;
+
+	p = PID[2];
+	Command2[3] = p & 0xff;
+	p >>= 8;
+	Command2[2] = p & 0xff;
+	if ((status = card_send_command(ioaddr, name, Command2, st)))
+		return status;
+
+	p = PID[3];
+	Command3[3] = p & 0xff;
+	p >>= 8;
+	Command3[2] = p & 0xff;
+	if ((status = card_send_command(ioaddr, name, Command3, st)))
+		return status;
+
+	if ((status = card_send_command(ioaddr, name, Command4, st)))
+		return status;
+	return sb1000_end_get_set_command(ioaddr, name);
+}
+
+
+static inline void
+sb1000_print_status_buffer(const char* name, unsigned char st[],
+	unsigned char buffer[], int size)
+{
+	int i, j, k;
+
+	printk(KERN_DEBUG "%s: status: %02x %02x\n", name, st[0], st[1]);
+	if (buffer[24] == 0x08 && buffer[25] == 0x00 && buffer[26] == 0x45) {
+		printk(KERN_DEBUG "%s: length: %d protocol: %d from: %d.%d.%d.%d:%d "
+			"to %d.%d.%d.%d:%d\n", name, buffer[28] << 8 | buffer[29],
+			buffer[35], buffer[38], buffer[39], buffer[40], buffer[41],
+            buffer[46] << 8 | buffer[47],
+			buffer[42], buffer[43], buffer[44], buffer[45],
+            buffer[48] << 8 | buffer[49]);
+	} else {
+		for (i = 0, k = 0; i < (size + 7) / 8; i++) {
+			printk(KERN_DEBUG "%s: %s", name, i ? "       " : "buffer:");
+			for (j = 0; j < 8 && k < size; j++, k++)
+				printk(" %02x", buffer[k]);
+			printk("\n");
+		}
+	}
+	return;
+}
+
+/*
+ * SB1000 commands for frame rx interrupt
+ */
+/* receive a single frame and assemble datagram
+ * (this is the heart of the interrupt routine)
+ */
+static inline int
+sb1000_rx(struct net_device *dev)
+{
+
+#define FRAMESIZE 184
+	unsigned char st[2], buffer[FRAMESIZE], session_id, frame_id;
+	short dlen;
+	int ioaddr, ns;
+	unsigned int skbsize;
+	struct sk_buff *skb;
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+	struct enet_statistics *stats = &lp->stats;
+
+	/* SB1000 frame constants */
+	const int FrameSize = FRAMESIZE;
+	const int NewDatagramHeaderSkip = 8;
+	const int NewDatagramHeaderSize = NewDatagramHeaderSkip + 18;
+	const int NewDatagramDataSize = FrameSize - NewDatagramHeaderSize;
+	const int ContDatagramHeaderSkip = 7;
+	const int ContDatagramHeaderSize = ContDatagramHeaderSkip + 1;
+	const int ContDatagramDataSize = FrameSize - ContDatagramHeaderSize;
+	const int TrailerSize = 4;
+
+	ioaddr = dev->base_addr;
+
+	insw(ioaddr, (unsigned short*) st, 1);
+#ifdef XXXDEBUG
+printk("cm0: received: %02x %02x\n", st[0], st[1]);
+#endif /* XXXDEBUG */
+	lp->rx_frames++;
+
+	/* decide if it is a good or bad frame */
+	for (ns = 0; ns < NPIDS; ns++) {
+		session_id = lp->rx_session_id[ns];
+		frame_id = lp->rx_frame_id[ns];
+		if (st[0] == session_id) {
+			if (st[1] == frame_id || (!frame_id && (st[1] & 0xf0) == 0x30)) {
+				goto good_frame;
+			} else if ((st[1] & 0xf0) == 0x30 && (st[0] & 0x40)) {
+				goto skipped_frame;
+			} else {
+				goto bad_frame;
+			}
+		} else if (st[0] == (session_id | 0x40)) {
+			if ((st[1] & 0xf0) == 0x30) {
+				goto skipped_frame;
+			} else {
+				goto bad_frame;
+			}
+		}
+	}
+	goto bad_frame;
+
+skipped_frame:
+	stats->rx_frame_errors++;
+	skb = lp->rx_skb[ns];
+	if (sb1000_debug > 1)
+		printk(KERN_WARNING "%s: missing frame(s): got %02x %02x "
+			"expecting %02x %02x\n", dev->name, st[0], st[1],
+			skb ? session_id : session_id | 0x40, frame_id);
+	if (skb) {
+		dev_kfree_skb(skb);
+		skb = 0;
+	}
+
+good_frame:
+	lp->rx_frame_id[ns] = 0x30 | ((st[1] + 1) & 0x0f);
+	/* new datagram */
+	if (st[0] & 0x40) {
+		/* get data length */
+		insw(ioaddr, buffer, NewDatagramHeaderSize / 2);
+#ifdef XXXDEBUG
+printk("cm0: IP identification: %02x%02x  fragment offset: %02x%02x\n", buffer[30], buffer[31], buffer[32], buffer[33]);
+#endif /* XXXDEBUG */
+		if (buffer[0] != NewDatagramHeaderSkip) {
+			if (sb1000_debug > 1)
+				printk(KERN_WARNING "%s: new datagram header skip error: "
+					"got %02x expecting %02x\n", dev->name, buffer[0],
+					NewDatagramHeaderSkip);
+			stats->rx_length_errors++;
+			insw(ioaddr, buffer, NewDatagramDataSize / 2);
+			goto bad_frame_next;
+		}
+		dlen = ((buffer[NewDatagramHeaderSkip + 3] & 0x0f) << 8 |
+			buffer[NewDatagramHeaderSkip + 4]) - 17;
+		if (dlen > SB1000_MRU) {
+			if (sb1000_debug > 1)
+				printk(KERN_WARNING "%s: datagram length (%d) greater "
+					"than MRU (%d)\n", dev->name, dlen, SB1000_MRU);
+			stats->rx_length_errors++;
+			insw(ioaddr, buffer, NewDatagramDataSize / 2);
+			goto bad_frame_next;
+		}
+		lp->rx_dlen[ns] = dlen;
+		/* compute size to allocate for datagram */
+		skbsize = dlen + FrameSize;
+		if ((skb = alloc_skb(skbsize, GFP_ATOMIC)) == NULL) {
+			if (sb1000_debug > 1)
+				printk(KERN_WARNING "%s: can't allocate %d bytes long "
+					"skbuff\n", dev->name, skbsize);
+			stats->rx_dropped++;
+			insw(ioaddr, buffer, NewDatagramDataSize / 2);
+			goto dropped_frame;
+		}
+		skb->dev = dev;
+		skb->mac.raw = skb->data;
+		skb->protocol = (unsigned short) buffer[NewDatagramHeaderSkip + 16];
+		insw(ioaddr, skb_put(skb, NewDatagramDataSize),
+			NewDatagramDataSize / 2);
+		lp->rx_skb[ns] = skb;
+	} else {
+		/* continuation of previous datagram */
+		insw(ioaddr, buffer, ContDatagramHeaderSize / 2);
+		if (buffer[0] != ContDatagramHeaderSkip) {
+			if (sb1000_debug > 1)
+				printk(KERN_WARNING "%s: cont datagram header skip error: "
+					"got %02x expecting %02x\n", dev->name, buffer[0],
+					ContDatagramHeaderSkip);
+			stats->rx_length_errors++;
+			insw(ioaddr, buffer, ContDatagramDataSize / 2);
+			goto bad_frame_next;
+		}
+		skb = lp->rx_skb[ns];
+		insw(ioaddr, skb_put(skb, ContDatagramDataSize),
+			ContDatagramDataSize / 2);
+		dlen = lp->rx_dlen[ns];
+	}
+	if (skb->len < dlen + TrailerSize) {
+		lp->rx_session_id[ns] &= ~0x40;
+		return 0;
+	}
+
+	/* datagram completed: send to upper level */
+	skb_trim(skb, dlen);
+	netif_rx(skb);
+	stats->rx_packets++;
+	lp->rx_bytes += dlen;
+	lp->rx_skb[ns] = 0;
+	lp->rx_session_id[ns] |= 0x40;
+	return 0;
+
+bad_frame:
+	insw(ioaddr, buffer, FrameSize / 2);
+	if (sb1000_debug > 1)
+		printk(KERN_WARNING "%s: frame error: got %02x %02x\n",
+			dev->name, st[0], st[1]);
+	stats->rx_frame_errors++;
+bad_frame_next:
+	if (sb1000_debug > 2)
+		sb1000_print_status_buffer(dev->name, st, buffer, FrameSize);
+dropped_frame:
+	stats->rx_errors++;
+	if (ns < NPIDS) {
+		if ((skb = lp->rx_skb[ns])) {
+			dev_kfree_skb(skb);
+			lp->rx_skb[ns] = 0;
+		}
+		lp->rx_session_id[ns] |= 0x40;
+	}
+	return -1;
+}
+
+static inline void
+sb1000_error_dpc(struct net_device *dev)
+{
+	char *name;
+	unsigned char st[5];
+	int ioaddr[2];
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+	const unsigned char Command0[6] = {0x80, 0x26, 0x00, 0x00, 0x00, 0x00};
+	const int ErrorDpcCounterInitialize = 200;
+
+	ioaddr[0] = dev->base_addr;
+	/* rmem_end holds the second I/O address - fv */
+	ioaddr[1] = dev->rmem_end;
+	name = dev->name;
+
+	sb1000_wait_for_ready_clear(ioaddr, name);
+	sb1000_send_command(ioaddr, name, Command0);
+	sb1000_wait_for_ready(ioaddr, name);
+	sb1000_read_status(ioaddr, st);
+	if (st[1] & 0x10)
+		lp->rx_error_dpc_count = ErrorDpcCounterInitialize;
+	return;
+}
+
+
+/*
+ * Linux interface functions
+ */
+static int
+sb1000_open(struct net_device *dev)
+{
+	char *name;
+	int ioaddr[2], status;
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+	const unsigned short FirmwareVersion[] = {0x01, 0x01};
+
+	ioaddr[0] = dev->base_addr;
+	/* rmem_end holds the second I/O address - fv */
+	ioaddr[1] = dev->rmem_end;
+	name = dev->name;
+	request_region(ioaddr[0], SB1000_IO_EXTENT, "sb1000");
+	request_region(ioaddr[1], SB1000_IO_EXTENT, "sb1000");
+
+	/* initialize sb1000 */
+	if ((status = sb1000_reset(ioaddr, name)))
+		return status;
+	nicedelay(200000);
+	if ((status = sb1000_check_CRC(ioaddr, name)))
+		return status;
+
+	/* initialize private data before board can catch interrupts */
+	lp->rx_skb[0] = NULL;
+	lp->rx_skb[1] = NULL;
+	lp->rx_skb[2] = NULL;
+	lp->rx_skb[3] = NULL;
+	lp->rx_dlen[0] = 0;
+	lp->rx_dlen[1] = 0;
+	lp->rx_dlen[2] = 0;
+	lp->rx_dlen[3] = 0;
+	lp->rx_bytes = 0;
+	lp->rx_frames = 0;
+	lp->rx_error_count = 0;
+	lp->rx_error_dpc_count = 0;
+	lp->rx_session_id[0] = 0x50;
+	lp->rx_session_id[0] = 0x48;
+	lp->rx_session_id[0] = 0x44;
+	lp->rx_session_id[0] = 0x42;
+	lp->rx_frame_id[0] = 0;
+	lp->rx_frame_id[1] = 0;
+	lp->rx_frame_id[2] = 0;
+	lp->rx_frame_id[3] = 0;
+	if (request_irq(dev->irq, &sb1000_interrupt, 0, "sb1000", dev)) {
+		return -EAGAIN;
+	}
+
+	if (sb1000_debug > 2)
+		printk(KERN_DEBUG "%s: Opening, IRQ %d\n", name, dev->irq);
+
+	/* Activate board and check firmware version */
+	udelay(1000);
+	if ((status = sb1000_activate(ioaddr, name)))
+		return status;
+	udelay(0);
+	if ((status = sb1000_get_firmware_version(ioaddr, name, version, 0)))
+		return status;
+	if (version[0] != FirmwareVersion[0] || version[1] != FirmwareVersion[1])
+		printk(KERN_WARNING "%s: found firmware version %x.%02x "
+			"(should be %x.%02x)\n", name, version[0], version[1],
+			FirmwareVersion[0], FirmwareVersion[1]);
+
+	dev->interrupt = 0;
+	dev->tbusy = 0;
+	dev->start = 1;
+
+	MOD_INC_USE_COUNT;
+	return 0;					/* Always succeed */
+}
+
+static int sb1000_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	char* name;
+	unsigned char version[2];
+	short PID[4];
+	int ioaddr[2], status, frequency;
+	unsigned int stats[5];
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+
+	if (!(dev && dev->flags & IFF_UP))
+		return -ENODEV;
+
+	ioaddr[0] = dev->base_addr;
+	/* rmem_end holds the second I/O address - fv */
+	ioaddr[1] = dev->rmem_end;
+	name = dev->name;
+
+	switch (cmd) {
+	case SIOCGCMSTATS:		/* get statistics */
+		stats[0] = lp->rx_bytes;
+		stats[1] = lp->rx_frames;
+		stats[2] = lp->stats.rx_packets;
+		stats[3] = lp->stats.rx_errors;
+		stats[4] = lp->stats.rx_dropped;
+		if(copy_to_user(ifr->ifr_data, stats, sizeof(stats)))
+			return -EFAULT;
+		status = 0;
+		break;
+
+	case SIOCGCMFIRMWARE:		/* get firmware version */
+		if ((status = sb1000_get_firmware_version(ioaddr, name, version, 1)))
+			return status;
+		if(copy_to_user(ifr->ifr_data, version, sizeof(version)))
+			return -EFAULT;
+		break;
+
+	case SIOCGCMFREQUENCY:		/* get frequency */
+		if ((status = sb1000_get_frequency(ioaddr, name, &frequency)))
+			return status;
+		if(put_user(frequency, (int*) ifr->ifr_data))
+			return -EFAULT;
+		break;
+
+	case SIOCSCMFREQUENCY:		/* set frequency */
+		if (!suser())
+			return -EPERM;
+		if(get_user(frequency, (int*) ifr->ifr_data))
+			return -EFAULT;
+		if ((status = sb1000_set_frequency(ioaddr, name, frequency)))
+			return status;
+		break;
+
+	case SIOCGCMPIDS:			/* get PIDs */
+		if ((status = sb1000_get_PIDs(ioaddr, name, PID)))
+			return status;
+		if(copy_to_user(ifr->ifr_data, PID, sizeof(PID)))
+			return -EFAULT;
+		break;
+
+	case SIOCSCMPIDS:			/* set PIDs */
+		if (!suser())
+			return -EPERM;
+		if(copy_from_user(PID, ifr->ifr_data, sizeof(PID)))
+			return -EFAULT;
+		if ((status = sb1000_set_PIDs(ioaddr, name, PID)))
+			return status;
+		/* set session_id, frame_id and pkt_type too */
+		lp->rx_session_id[0] = 0x50 | (PID[0] & 0x0f);
+		lp->rx_session_id[1] = 0x48;
+		lp->rx_session_id[2] = 0x44;
+		lp->rx_session_id[3] = 0x42;
+		lp->rx_frame_id[0] = 0;
+		lp->rx_frame_id[1] = 0;
+		lp->rx_frame_id[2] = 0;
+		lp->rx_frame_id[3] = 0;
+		break;
+
+	default:
+		status = -EINVAL;
+		break;
+	}
+	return status;
+}
+
+/* transmit function: do nothing since SB1000 can't send anything out */
+static int
+sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	printk(KERN_WARNING "%s: trying to transmit!!!\n", dev->name);
+	/* sb1000 can't xmit datagrams */
+	dev_kfree_skb(skb);
+	return 0;
+}
+
+/* SB1000 interrupt handler. */
+static void sb1000_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	char *name;
+	unsigned char st;
+	int ioaddr[2];
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+
+	const unsigned char Command0[6] = {0x80, 0x2c, 0x00, 0x00, 0x00, 0x00};
+	const unsigned char Command1[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
+	const int MaxRxErrorCount = 6;
+
+	if (dev == NULL) {
+		printk(KERN_ERR "sb1000_interrupt(): irq %d for unknown device.\n",
+			irq);
+		return;
+	}
+	if (dev->interrupt)
+		printk(KERN_ERR "%s: Re-entering the interrupt handler.\n",
+			dev->name);
+	dev->interrupt = 1;
+
+	ioaddr[0] = dev->base_addr;
+	/* rmem_end holds the second I/O address - fv */
+	ioaddr[1] = dev->rmem_end;
+	name = dev->name;
+
+	/* is it a good interrupt? */
+	st = inb(ioaddr[1] + 6);
+	if (!(st & 0x08 && st & 0x20)) {
+		dev->interrupt = 0;
+		return;
+	}
+
+	if (sb1000_debug > 3)
+		printk(KERN_DEBUG "%s: entering interrupt\n", dev->name);
+
+	st = inb(ioaddr[0] + 7);
+	if (sb1000_rx(dev))
+		lp->rx_error_count++;
+#ifdef SB1000_DELAY
+	udelay(SB1000_DELAY);
+#endif /* SB1000_DELAY */
+	sb1000_issue_read_command(ioaddr, name);
+	if (st & 0x01) {
+		sb1000_error_dpc(dev);
+		sb1000_issue_read_command(ioaddr, name);
+	}
+	if (lp->rx_error_dpc_count && !(--lp->rx_error_dpc_count)) {
+		sb1000_wait_for_ready_clear(ioaddr, name);
+		sb1000_send_command(ioaddr, name, Command0);
+		sb1000_wait_for_ready(ioaddr, name);
+		sb1000_issue_read_command(ioaddr, name);
+	}
+	if (lp->rx_error_count >= MaxRxErrorCount) {
+		sb1000_wait_for_ready_clear(ioaddr, name);
+		sb1000_send_command(ioaddr, name, Command1);
+		sb1000_wait_for_ready(ioaddr, name);
+		sb1000_issue_read_command(ioaddr, name);
+		lp->rx_error_count = 0;
+	}
+
+	dev->interrupt = 0;
+	return;
+}
+
+static struct net_device_stats *sb1000_stats(struct net_device *dev)
+{
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+	return &lp->stats;
+}
+
+static int sb1000_close(struct net_device *dev)
+{
+	int i;
+	int ioaddr[2];
+	struct sb1000_private *lp = (struct sb1000_private *)dev->priv;
+
+	if (sb1000_debug > 2)
+		printk(KERN_DEBUG "%s: Shutting down sb1000.\n", dev->name);
+
+	dev->tbusy = 1;
+	dev->start = 0;
+
+	ioaddr[0] = dev->base_addr;
+	/* rmem_end holds the second I/O address - fv */
+	ioaddr[1] = dev->rmem_end;
+
+	free_irq(dev->irq, dev);
+	/* If we don't do this, we can't re-insmod it later. */
+	release_region(ioaddr[1], SB1000_IO_EXTENT);
+	release_region(ioaddr[0], SB1000_IO_EXTENT);
+
+	/* free rx_skb's if needed */
+	for (i=0; i<4; i++) {
+		if (lp->rx_skb[i]) {
+			dev_kfree_skb(lp->rx_skb[i]);
+		}
+	}
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+#ifdef MODULE
+MODULE_AUTHOR("Franco Venturi <fventuri@mediaone.net>");
+MODULE_DESCRIPTION("General Instruments SB1000 driver");
+MODULE_PARM(io, "1-2i");
+MODULE_PARM(irq, "i");
+
+static char devname[8] = {0, };
+static struct net_device dev_sb1000 = {
+        devname,
+        0, 0, 0, 0,
+        0, 0,
+        0, 0, 0, NULL, sb1000_probe };
+
+static int io[2]  = {0, 0};
+static int irq = 0;
+
+int
+init_module(void)
+{
+	int i;
+	for (i = 0; i < 100; i++) {
+		sprintf(devname, "cm%d", i);
+		if (dev_get(devname) == NULL) break;
+	}
+	if (i == 100) {
+		printk(KERN_ERR "sb1000: can't register any device cm<n>\n");
+		return -ENFILE;
+	}
+	dev_sb1000.base_addr = io[0];
+	/* rmem_end holds the second I/O address - fv */
+	dev_sb1000.rmem_end = io[1];
+	dev_sb1000.irq = irq;
+	if (register_netdev(&dev_sb1000) != 0) {
+		printk(KERN_ERR "sb1000: failed to register device (io: %03x,%03x   "
+			"irq: %d)\n", io[0], io[1], irq);
+		return -EIO;
+	}
+	return 0;
+}
+
+void cleanup_module(void)
+{
+	unregister_netdev(&dev_sb1000);
+	kfree_s(dev_sb1000.priv, sizeof(struct sb1000_private));
+	dev_sb1000.priv = NULL;
+}
+#endif /* MODULE */
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -D__KERNEL__ -DMODULE -Wall -Wstrict-prototypes -O -m486 -c sb1000.c"
+ *  version-control: t
+ *  tab-width: 4
+ *  c-basic-offset: 4
+ * End:
+ */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)