patch-2.3.23 linux/include/asm-arm/proc-armv/ptrace.h

Next file: linux/include/asm-arm/proc-armv/system.h
Previous file: linux/include/asm-arm/proc-armv/processor.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.22/linux/include/asm-arm/proc-armv/ptrace.h linux/include/asm-arm/proc-armv/ptrace.h
@@ -1,12 +1,33 @@
 /*
  * linux/include/asm-arm/proc-armv/ptrace.h
  *
- * Copyright (C) 1996 Russell King
+ * Copyright (C) 1996-1999 Russell King
  */
-
 #ifndef __ASM_PROC_PTRACE_H
 #define __ASM_PROC_PTRACE_H
 
+#define USR26_MODE	0x00
+#define FIQ26_MODE	0x01
+#define IRQ26_MODE	0x02
+#define SVC26_MODE	0x03
+#define USR_MODE	0x10
+#define FIQ_MODE	0x11
+#define IRQ_MODE	0x12
+#define SVC_MODE	0x13
+#define ABT_MODE	0x17
+#define UND_MODE	0x1b
+#define SYSTEM_MODE	0x1f
+#define MODE_MASK	0x1f
+#define F_BIT		0x40
+#define I_BIT		0x80
+#define CC_V_BIT	(1 << 28)
+#define CC_C_BIT	(1 << 29)
+#define CC_Z_BIT	(1 << 30)
+#define CC_N_BIT	(1 << 31)
+#define PCMASK		0
+
+#ifndef __ASSEMBLY__
+
 /* this struct defines the way the registers are stored on the
    stack during a system call. */
 
@@ -31,37 +52,12 @@
 #define ARM_r2		uregs[2]
 #define ARM_r1		uregs[1]
 #define ARM_r0		uregs[0]
-#define ARM_ORIG_r0	uregs[17] /* -1 */
-
-#define USR26_MODE	0x00
-#define FIQ26_MODE	0x01
-#define IRQ26_MODE	0x02
-#define SVC26_MODE	0x03
-#define USR_MODE	0x10
-#define FIQ_MODE	0x11
-#define IRQ_MODE	0x12
-#define SVC_MODE	0x13
-#define ABT_MODE	0x17
-#define UND_MODE	0x1b
-#define SYSTEM_MODE	0x1f
-#define MODE_MASK	0x1f
-#define F_BIT		0x40
-#define I_BIT		0x80
-#define CC_V_BIT	(1 << 28)
-#define CC_C_BIT	(1 << 29)
-#define CC_Z_BIT	(1 << 30)
-#define CC_N_BIT	(1 << 31)
+#define ARM_ORIG_r0	uregs[17]
 
 #ifdef __KERNEL__
 
-#if 0 /* GCC/egcs should be able to optimise this, IMHO */
-#define user_mode(regs)	\
-	((((regs)->ARM_cpsr & MODE_MASK) == USR_MODE) || \
-	 (((regs)->ARM_cpsr & MODE_MASK) == USR26_MODE))
-#else
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
-#endif
 
 #define processor_mode(regs) \
 	((regs)->ARM_cpsr & MODE_MASK)
@@ -75,9 +71,6 @@
 #define condition_codes(regs) \
 	((regs)->ARM_cpsr & (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT))
 	
-#define instruction_pointer(regs)	((regs)->ARM_pc)
-#define pc_pointer(v)			(v)
-
 /* Are the current registers suitable for user mode?
  * (used to maintain security in signal handlers)
  */
@@ -96,6 +89,8 @@
 }
 
 #endif	/* __KERNEL__ */
+
+#endif	/* __ASSEMBLY__ */
 
 #endif
 

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)