patch-2.3.40 linux/Documentation/computone.txt

Next file: linux/Documentation/fb/framebuffer.txt
Previous file: linux/Documentation/README.moxa
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.39/linux/Documentation/computone.txt linux/Documentation/computone.txt
@@ -7,7 +7,7 @@
 kernel and have been tested on Linux kernels 2.0, 2.2, and 2.3.
 
 Version: 1.2.4
-Date: 08/04/99
+Date: 12/15/99
 Author: Andrew Manison <amanison@america.net>
 Testing: larryg@computone.com
 Support: support@computone.com
@@ -28,7 +28,7 @@
 products previous to the Intelliport II.
 
 This driver was developed on the v2.0.x Linux tree and has been tested up
-to v2.2.9; it will probably not work with earlier v1.X kernels,.
+to v2.2.13; it will probably not work with earlier v1.X kernels,.
 
 
 2. QUICK INSTALLATION
@@ -204,9 +204,94 @@
 
 7. ip2mkdev shell script
 
-===== Cut Here ===== 
+Previously, this script was simply attached here.  It is now attached as a
+shar archive to make it easier to extract the script from the documentation.
+To create the ip2mkdev shell script change to a convenient directory (/tmp
+works just fine) and run the following command:
+
+	unshar /usr/src/linux/Documentation/computone.txt
+		(This file)
+
+You should now have a file ip2mkdev in your current working directory with
+permissions set to execute.  Running that script with then create the
+necessary devices for the Computone boards, interfaces, and ports which
+are present on you system at the time it is run.
+
+
+#!/bin/sh
+# This is a shell archive (produced by GNU sharutils 4.2).
+# To extract the files from this archive, save it to some FILE, remove
+# everything before the `!/bin/sh' line above, then type `sh FILE'.
+#
+# Made on 1999-12-17 16:06 EST by <root@alcove.wittsend.com>.
+# Source directory was `/mnt2/src/linux-2.3.33/Documentation'.
+#
+# Existing files will *not* be overwritten unless `-c' is specified.
+#
+# This shar contains:
+# length mode       name
+# ------ ---------- ------------------------------------------
+#   3300 -rwxr-xr-x ip2mkdev
+#
+save_IFS="${IFS}"
+IFS="${IFS}:"
+gettext_dir=FAILED
+locale_dir=FAILED
+first_param="$1"
+for dir in $PATH
+do
+  if test "$gettext_dir" = FAILED && test -f $dir/gettext \
+     && ($dir/gettext --version >/dev/null 2>&1)
+  then
+    set `$dir/gettext --version 2>&1`
+    if test "$3" = GNU
+    then
+      gettext_dir=$dir
+    fi
+  fi
+  if test "$locale_dir" = FAILED && test -f $dir/shar \
+     && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
+  then
+    locale_dir=`$dir/shar --print-text-domain-dir`
+  fi
+done
+IFS="$save_IFS"
+if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
+then
+  echo=echo
+else
+  TEXTDOMAINDIR=$locale_dir
+  export TEXTDOMAINDIR
+  TEXTDOMAIN=sharutils
+  export TEXTDOMAIN
+  echo="$gettext_dir/gettext -s"
+fi
+touch -am 1231235999 $$.touch >/dev/null 2>&1
+if test ! -f 1231235999 && test -f $$.touch; then
+  shar_touch=touch
+else
+  shar_touch=:
+  echo
+  $echo 'WARNING: not restoring timestamps.  Consider getting and'
+  $echo "installing GNU \`touch', distributed in GNU File Utilities..."
+  echo
+fi
+rm -f 1231235999 $$.touch
+#
+if mkdir _sh06360; then
+  $echo 'x -' 'creating lock directory'
+else
+  $echo 'failed to create lock directory'
+  exit 1
+fi
+# ============= ip2mkdev ==============
+if test -f 'ip2mkdev' && test "$first_param" != -c; then
+  $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)'
+else
+  $echo 'x -' extracting 'ip2mkdev' '(text)'
+  sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' &&
 #!/bin/sh -
-
+X
 #	ip2mkdev
 #
 #	Make or remove devices as needed for Computone Intelliport drivers
@@ -227,117 +312,134 @@
 #
 if test ! -f /proc/tty/drivers
 then
-	echo "\
+X	echo "\
 Unable to check driver status.
 Make sure proc file system is mounted."
-
-	exit 255
+X
+X	exit 255
 fi
-
+X
 if test ! -f /proc/tty/driver/ip2
 then
-	echo "\
+X	echo "\
 Unable to locate ip2 proc file.
 Attempting to load driver"
-
-	if insmod ip2
-	then
-		if test ! -f /proc/tty/driver/ip2
-		then
-			echo "\
+X
+X	if /sbin/insmod ip2
+X	then
+X		if test ! -f /proc/tty/driver/ip2
+X		then
+X			echo "\
 Unable to locate ip2 proc file after loading driver.
 Driver initialization failure or driver version error.
 "
-		exit 255
-		fi
-	else
-		echo "Unable to load ip2 driver."
-		exit 255
-	fi
+X		exit 255
+X		fi
+X	else
+X		echo "Unable to load ip2 driver."
+X		exit 255
+X	fi
 fi
-
+X
 # Ok...  So we got the driver loaded and we can locate the procfs files.
 # Next we need our major numbers.
-
+X
 TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tty/!d' -e 's/.*tty.[ 	]*\([0-9]*\)[ 	]*.*/\1/' < /proc/tty/drivers`
 CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu.[ 	]*\([0-9]*\)[ 	]*.*/\1/' < /proc/tty/drivers`
 BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ 	]*.*/\1/' < /proc/tty/driver/ip2`
-
+X
 echo "\
 TTYMAJOR = $TTYMAJOR
 CUAMAJOR = $CUAMAJOR
 BRDMAJOR = $BRDMAJOR
 "
-
+X
 # Ok...  Now we should know our major numbers, if appropriate...
 # Now we need our boards and start the device loops.
-
+X
 grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest
 do
-	# The test for blank "type" will catch the stats lead-in lines
-	# if they exist in the file
-	if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
-	then
-		continue
-	fi
-
-	BOARDNO=`expr "$number" : '\([0-9]\):'`
-	PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
-	MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
-
-	if test "$BOARDNO" = "" -o "$PORTS" = ""
-	then
+X	# The test for blank "type" will catch the stats lead-in lines
+X	# if they exist in the file
+X	if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
+X	then
+X		continue
+X	fi
+X
+X	BOARDNO=`expr "$number" : '\([0-9]\):'`
+X	PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
+X	MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
+X
+X	if test "$BOARDNO" = "" -o "$PORTS" = ""
+X	then
 #	This may be a bug.  We should at least get this much information
-		echo "Unable to process board line"
-		continue
-	fi
-
-	if test "$MINORS" = ""
-	then
+X		echo "Unable to process board line"
+X		continue
+X	fi
+X
+X	if test "$MINORS" = ""
+X	then
 #	Silently skip this one.  This board seems to have no boxes
-		continue
-	fi
-
-	echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
-
-	if test "$BRDMAJOR" != ""
-	then
-		BRDMINOR=`expr $BOARDNO \* 4`
-		STSMINOR=`expr $BRDMINOR + 1`
-		if test ! -c /dev/ip2ipl$BOARDNO ; then
-			mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
-		fi
-		if test ! -c /dev/ip2stat$BOARDNO ; then
-			mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
-		fi
-	fi
-
-	if test "$TTYMAJOR" != ""
-	then
-		PORTNO=$BOARDBASE
-
-		for PORTNO in $MINORS
-		do
-			if test ! -c /dev/ttyF$PORTNO ; then
-				# We got the harware but no device - make it
-				mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
-			fi	
-		done
-	fi
-
-	if test "$CUAMAJOR" != ""
-	then
-		PORTNO=$BOARDBASE
-
-		for PORTNO in $MINORS
-		do
-			if test ! -c /dev/cuf$PORTNO ; then
-				# We got the harware but no device - make it
-				mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
-			fi	
-		done
-	fi
+X		continue
+X	fi
+X
+X	echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
+X
+X	if test "$BRDMAJOR" != ""
+X	then
+X		BRDMINOR=`expr $BOARDNO \* 4`
+X		STSMINOR=`expr $BRDMINOR + 1`
+X		if test ! -c /dev/ip2ipl$BOARDNO ; then
+X			mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
+X		fi
+X		if test ! -c /dev/ip2stat$BOARDNO ; then
+X			mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
+X		fi
+X	fi
+X
+X	if test "$TTYMAJOR" != ""
+X	then
+X		PORTNO=$BOARDBASE
+X
+X		for PORTNO in $MINORS
+X		do
+X			if test ! -c /dev/ttyF$PORTNO ; then
+X				# We got the harware but no device - make it
+X				mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
+X			fi	
+X		done
+X	fi
+X
+X	if test "$CUAMAJOR" != ""
+X	then
+X		PORTNO=$BOARDBASE
+X
+X		for PORTNO in $MINORS
+X		do
+X			if test ! -c /dev/cuf$PORTNO ; then
+X				# We got the harware but no device - make it
+X				mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
+X			fi	
+X		done
+X	fi
 done
-
+X
+Xexit 0
+SHAR_EOF
+  $shar_touch -am 1217160599 'ip2mkdev' &&
+  chmod 0755 'ip2mkdev' ||
+  $echo 'restore of' 'ip2mkdev' 'failed'
+  if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
+  && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
+    md5sum -c << SHAR_EOF >/dev/null 2>&1 \
+    || $echo 'ip2mkdev:' 'MD5 check failed'
+eccd181f4a2005e47a969fc83885df61  ip2mkdev
+SHAR_EOF
+  else
+    shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`"
+    test 3300 -eq "$shar_count" ||
+    $echo 'ip2mkdev:' 'original size' '3300,' 'current size' "$shar_count!"
+  fi
+fi
+rm -fr _sh06360
 exit 0
-===== Cut Here ===== 

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)