patch-2.3.48 linux/arch/mips64/sgi-ip22/ip22-mc.c

• Lines: 162
• Date: Thu Feb 24 22:53:35 2000
• Orig file: v2.3.47/linux/arch/mips64/sgi-ip22/ip22-mc.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.47/linux/arch/mips64/sgi-ip22/ip22-mc.c linux/arch/mips64/sgi-ip22/ip22-mc.c
@@ -0,0 +1,161 @@
+/* $Id: ip22-mc.c,v 1.2 1999/12/04 03:59:01 ralf Exp $
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * indy_mc.c: Routines for manipulating the INDY memory controller.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/addrspace.h>
+#include <asm/ptrace.h>
+#include <asm/sgi/sgimc.h>
+#include <asm/sgi/sgihpc.h>
+#include <asm/sgialib.h>
+
+/* #define DEBUG_SGIMC */
+
+struct sgimc_misc_ctrl *mcmisc_regs;
+u32 *rpsscounter;
+struct sgimc_dma_ctrl *dmactrlregs;
+
+static inline char *mconfig_string(unsigned long val)
+{
+	switch(val & SGIMC_MCONFIG_RMASK) {
+	case SGIMC_MCONFIG_FOURMB:
+		return "4MB";
+
+	case SGIMC_MCONFIG_EIGHTMB:
+		return "8MB";
+
+	case SGIMC_MCONFIG_SXTEENMB:
+		return "16MB";
+
+	case SGIMC_MCONFIG_TTWOMB:
+		return "32MB";
+
+	case SGIMC_MCONFIG_SFOURMB:
+		return "64MB";
+
+	case SGIMC_MCONFIG_OTEIGHTMB:
+		return "128MB";
+
+	default:
+		return "wheee, unknown";
+	};
+}
+
+void __init sgimc_init(void)
+{
+	unsigned long tmpreg;
+
+	mcmisc_regs = (struct sgimc_misc_ctrl *)(KSEG1+0x1fa00000);
+	rpsscounter = (u32 *) (KSEG1 + 0x1fa01004);
+	dmactrlregs = (struct sgimc_dma_ctrl *) (KSEG1+0x1fa02000);
+
+	printk("MC: SGI memory controller Revision %d\n",
+	       (int) mcmisc_regs->systemid & SGIMC_SYSID_MASKREV);
+
+#if 0 /* XXX Until I figure out what this bit really indicates XXX */
+	/* XXX Is this systemid bit reliable? */
+	if(mcmisc_regs->systemid & SGIMC_SYSID_EPRESENT) {
+		EISA_bus = 1;
+		printk("with EISA\n");
+	} else {
+		EISA_bus = 0;
+		printk("no EISA\n");
+	}
+#endif
+
+#ifdef DEBUG_SGIMC
+	prom_printf("sgimc_init: memconfig0<%s> mconfig1<%s>\n",
+		    mconfig_string(mcmisc_regs->mconfig0),
+		    mconfig_string(mcmisc_regs->mconfig1));
+
+	prom_printf("mcdump: cpuctrl0<%08lx> cpuctrl1<%08lx>\n",
+		    mcmisc_regs->cpuctrl0, mcmisc_regs->cpuctrl1);
+	prom_printf("mcdump: divider<%08lx>, gioparm<%04x>\n",
+		    mcmisc_regs->divider, mcmisc_regs->gioparm);
+#endif
+
+	/* Place the MC into a known state.  This must be done before
+	 * interrupts are first enabled etc.
+	 */
+
+	/* Step 1: The CPU/GIO error status registers will not latch
+	 *         up a new error status until the register has been
+	 *         cleared by the cpu.  These status registers are
+	 *         cleared by writing any value to them.
+	 */
+	mcmisc_regs->cstat = mcmisc_regs->gstat = 0;
+
+	/* Step 2: Enable all parity checking in cpu control register
+	 *         zero.
+	 */
+	tmpreg = mcmisc_regs->cpuctrl0;
+	tmpreg |= (SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM |
+		   SGIMC_CCTRL0_R4KNOCHKPARR);
+	mcmisc_regs->cpuctrl0 = tmpreg;
+
+	/* Step 3: Setup the MC write buffer depth, this is controlled
+	 *         in cpu control register 1 in the lower 4 bits.
+	 */
+	tmpreg = mcmisc_regs->cpuctrl1;
+	tmpreg &= ~0xf;
+	tmpreg |= 0xd;
+	mcmisc_regs->cpuctrl1 = tmpreg;
+
+	/* Step 4: Initialize the RPSS divider register to run as fast
+	 *         as it can correctly operate.  The register is laid
+	 *         out as follows:
+	 *
+	 *         ----------------------------------------
+	 *         |  RESERVED  |   INCREMENT   | DIVIDER |
+	 *         ----------------------------------------
+	 *          31        16 15            8 7       0
+	 *
+	 *         DIVIDER determines how often a 'tick' happens,
+	 *         INCREMENT determines by how the RPSS increment
+	 *         registers value increases at each 'tick'. Thus,
+	 *         for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+	 */
+	mcmisc_regs->divider = 0x101;
+
+	/* Step 5: Initialize GIO64 arbitrator configuration register.
+	 *
+	 * NOTE: If you dork with startup code the HPC init code in
+	 *       sgihpc_init() must run before us because of how we
+	 *       need to know Guiness vs. FullHouse and the board
+	 *       revision on this machine.  You have been warned.
+	 */
+
+	/* First the basic invariants across all gio64 implementations. */
+	tmpreg = SGIMC_GIOPARM_HPC64;    /* All 1st HPC's interface at 64bits. */
+	tmpreg |= SGIMC_GIOPARM_ONEBUS;  /* Only one physical GIO bus exists. */
+
+	if(sgi_guiness) {
+		/* Guiness specific settings. */
+		tmpreg |= SGIMC_GIOPARM_EISA64;     /* MC talks to EISA at 64bits */
+		tmpreg |= SGIMC_GIOPARM_MASTEREISA; /* EISA bus can act as master */
+	} else {
+		/* Fullhouse specific settings. */
+		if(sgi_boardid < 2) {
+			tmpreg |= SGIMC_GIOPARM_HPC264; /* 2nd HPC at 64bits */
+			tmpreg |= SGIMC_GIOPARM_PLINEEXP0; /* exp0 pipelines */
+			tmpreg |= SGIMC_GIOPARM_MASTEREXP1;/* exp1 masters */
+			tmpreg |= SGIMC_GIOPARM_RTIMEEXP0; /* exp0 is realtime */
+		} else {
+			tmpreg |= SGIMC_GIOPARM_HPC264; /* 2nd HPC 64bits */
+			tmpreg |= SGIMC_GIOPARM_PLINEEXP0; /* exp[01] pipelined */
+			tmpreg |= SGIMC_GIOPARM_PLINEEXP1;
+			tmpreg |= SGIMC_GIOPARM_MASTEREISA;/* EISA masters */
+			/* someone forgot this poor little guy... */
+			tmpreg |= SGIMC_GIOPARM_GFX64; 	/* GFX at 64 bits */
+		}
+	}
+	mcmisc_regs->gioparm = tmpreg; /* poof */
+}