patch-2.3.48 linux/arch/mips64/sgi-ip27/ip27-setup.c

• Lines: 113
• Date: Thu Feb 24 22:53:35 2000
• Orig file: v2.3.47/linux/arch/mips64/sgi-ip27/ip27-setup.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.47/linux/arch/mips64/sgi-ip27/ip27-setup.c linux/arch/mips64/sgi-ip27/ip27-setup.c
@@ -0,0 +1,112 @@
+/* $Id: ip27-setup.c,v 1.6 2000/02/05 02:12:32 kanoj Exp $
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI IP27 specific setup.
+ *
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999 Silcon Graphics, Inc.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/klconfig.h>
+#include <asm/ioc3.h>
+#include <asm/mipsregs.h>
+#include <asm/sn/klconfig.h>
+
+/* Check against user dumbness.  */
+#ifdef CONFIG_VT
+#error CONFIG_VT not allowed for IP27.
+#endif
+
+/*
+ * get_nasid() returns the physical node id number of the caller.
+ */
+nasid_t
+get_nasid(void)
+{
+	return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
+	                 >> NSRI_NODEID_SHFT);
+}
+
+/* Extracted from the IOC3 meta driver.  FIXME.  */
+static inline void ioc3_sio_init(void)
+{
+	struct ioc3 *ioc3;
+	nasid_t nid;
+        long loops;
+
+	nid = get_nasid();
+	ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
+
+	ioc3->sscr_a = 0;			/* PIO mode for uarta.  */
+	ioc3->sscr_b = 0;			/* PIO mode for uartb.  */
+	ioc3->sio_iec = ~0;
+	ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
+
+	loops=1000000; while(loops--);
+	ioc3->sregs.uarta.iu_fcr = 0;
+	ioc3->sregs.uartb.iu_fcr = 0;
+	loops=1000000; while(loops--);
+}
+
+static inline void ioc3_eth_init(void)
+{
+	struct ioc3 *ioc3;
+	nasid_t nid;
+
+	nid = get_nasid();
+	ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
+
+	ioc3->eier = 0;
+}
+
+/* Try to catch kernel missconfigurations and give user an indication what
+   option to select.  */
+static void __init verify_mode(void)
+{
+	int n_mode;
+
+	n_mode = LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_MORENODES_MASK;
+	printk("Machine is in %c mode.\n", n_mode ? 'N' : 'M');
+#ifdef CONFIG_SGI_SN0_N_MODE
+	if (!n_mode)
+		panic("Kernel compiled for M mode.");
+#else
+	if (n_mode)
+		panic("Kernel compiled for N mode.");
+#endif
+}
+
+void __init ip27_setup(void)
+{
+	nasid_t nid;
+	hubreg_t p, e;
+
+	set_cp0_status(ST0_IM, 0);
+	nid = get_nasid();
+	printk("IP27: Running on node %d.\n", nid);
+
+	p = LOCAL_HUB_L(PI_CPU_PRESENT_A) & 1;
+	e = LOCAL_HUB_L(PI_CPU_ENABLE_A) & 1;
+	printk("Node %d has %s primary CPU%s.\n", nid,
+	       p ? "a" : "no",
+	       e ? ", CPU is running" : "");
+
+	p = LOCAL_HUB_L(PI_CPU_PRESENT_B) & 1;
+	e = LOCAL_HUB_L(PI_CPU_ENABLE_B) & 1;
+	printk("Node %d has %s secondary CPU%s.\n", nid,
+	       p ? "a" : "no",
+	       e ? ", CPU is running" : "");
+
+	verify_mode();
+	ioc3_sio_init();
+	ioc3_eth_init();
+}