patch-2.3.48 linux/drivers/char/nwflash.c

Next file: linux/drivers/char/raw.c
Previous file: linux/drivers/char/nwbutton.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.47/linux/drivers/char/nwflash.c linux/drivers/char/nwflash.c
@@ -0,0 +1,708 @@
+/*
+ * Flash memory interface rev.5 driver for the Intel
+ * Flash chips used on the NetWinder.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+
+#include <asm/dec21285.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+/*****************************************************************************/
+#include <asm/nwflash.h>
+
+//#define MINIKERNEL 1          //export flash write, erase routines for MiniKernel
+
+#ifndef MINIKERNEL
+#define MSTATIC static
+#else
+#define MSTATIC
+#endif
+
+#define	NWFLASH_VERSION "6.2"
+
+MSTATIC void kick_open(void);
+MSTATIC int get_flash_id(void);
+MSTATIC int erase_block(int nBlock);
+MSTATIC int write_block(unsigned long p, const char *buf, int count);
+static int open_flash(struct inode *inodep, struct file *filep);
+static int release_flash(struct inode *inodep, struct file *filep);
+static int flash_ioctl(struct inode *inodep, struct file *filep, unsigned int cmd, unsigned long arg);
+static ssize_t flash_read(struct file *file, char *buf, size_t count, loff_t * ppos);
+static ssize_t flash_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
+static long long flash_llseek(struct file *file, long long offset, int orig);
+
+#define KFLASH_SIZE	1024*1024	//1 Meg
+#define KFLASH_SIZE4	4*1024*1024	//4 Meg
+#define KFLASH_ID	0x89A6		//Intel flash
+#define KFLASH_ID4	0xB0D4		//Intel flash 4Meg
+
+static int flashdebug = 0;	//if set - we will display progress msgs
+
+static int gbWriteEnable = 0;
+static int gbWriteBase64Enable = 0;
+MSTATIC int gbFlashSize = KFLASH_SIZE;
+
+extern spinlock_t gpio_lock;
+
+static struct file_operations flash_fops =
+{
+	flash_llseek,		/* llseek			 */
+	flash_read,		/* read				 */
+	flash_write,		/* write			 */
+	NULL,			/* no special readdir            */
+	NULL,			/* no special select             */
+	flash_ioctl,
+	NULL,			/* no special mmap               */
+	open_flash,
+	NULL,			/* no special flush		 */
+	release_flash,
+	NULL,			/* no special fsync              */
+	NULL,			/* no special fasync             */
+	NULL,			/* no special check_media_change */
+	NULL			/* no special revaldate          */
+};
+
+static struct miscdevice flash_miscdev =
+{
+	FLASH_MINOR,
+	"nwflash",
+	&flash_fops
+};
+
+/*
+ * the delay routine - it is often required to let the flash "breeze"...
+ */
+void flash_wait(int timeout)
+{
+	current->state = TASK_INTERRUPTIBLE;
+	schedule_timeout(timeout);
+}
+
+MSTATIC int get_flash_id(void)
+{
+	volatile unsigned int c1, c2;
+
+	/*
+	 * try to get flash chip ID
+	 */
+	kick_open();
+	c2 = inb(0x80);
+	*(unsigned char *) (FLASH_BASE + 0x8000) = 0x90;
+	udelay(15);
+	c1 = *(unsigned char *) FLASH_BASE;
+	c2 = inb(0x80);
+
+	/*
+	 * on 4 Meg flash the second byte is actually at offset 2...
+	 */
+	if (c1 == 0xB0)
+		c2 = *(unsigned char *) (FLASH_BASE + 2);
+	else
+		c2 = *(unsigned char *) (FLASH_BASE + 1);
+
+	c2 += (c1 << 8);
+
+	/*
+	 * set it back to read mode
+	 */
+	*(unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
+
+	if (c2 == KFLASH_ID4)
+		gbFlashSize = KFLASH_SIZE4;
+
+	return c2;
+}
+
+static int open_flash(struct inode *inodep, struct file *filep)
+{
+	int id;
+
+	id = get_flash_id();
+	if ((id != KFLASH_ID) && (id != KFLASH_ID4)) {
+		printk("Flash: incorrect ID 0x%04X.\n", id);
+		return -ENXIO;
+	}
+	MOD_INC_USE_COUNT;
+
+	return 0;
+}
+
+
+static int release_flash(struct inode *inodep, struct file *filep)
+{
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+
+static int flash_ioctl(struct inode *inodep, struct file *filep, unsigned int cmd, unsigned long arg)
+{
+//      printk("Flash_ioctl: cmd = 0x%X.\n",cmd);
+
+	switch (cmd) {
+	case CMD_WRITE_DISABLE:
+		gbWriteBase64Enable = 0;
+		gbWriteEnable = 0;
+		break;
+
+	case CMD_WRITE_ENABLE:
+		gbWriteEnable = 1;
+		break;
+
+	case CMD_WRITE_BASE64K_ENABLE:
+		gbWriteBase64Enable = 1;
+		break;
+
+	default:
+		gbWriteBase64Enable = 0;
+		gbWriteEnable = 0;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+
+static ssize_t flash_read(struct file *file, char *buf, size_t count, loff_t * ppos)
+{
+	unsigned long p = file->f_pos;
+	int read;
+
+	if (flashdebug)
+		printk("Flash_dev: flash_read: offset=0x%X, buffer=0x%X, count=0x%X.\n",
+		       (unsigned int) p, (unsigned int) buf, count);
+
+
+	if (count < 0)
+		return -EINVAL;
+
+	if (count > gbFlashSize - p)
+		count = gbFlashSize - p;
+
+	/*
+	 * flash virtual address
+	 */
+	p += FLASH_BASE;
+
+	read = 0;
+
+	if (copy_to_user(buf, (void *) p, count))
+		return -EFAULT;
+	read += count;
+	file->f_pos += read;
+	return read;
+}
+
+static ssize_t flash_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
+{
+	unsigned long p = file->f_pos;
+	int written;
+	int nBlock, temp, rc;
+	int i, j;
+
+
+	if (flashdebug)
+		printk("Flash_dev: flash_write: offset=0x%X, buffer=0x%X, count=0x%X.\n",
+		       (unsigned int) p, (unsigned int) buf, count);
+
+	if (!gbWriteEnable)
+		return -EINVAL;
+
+	if (p < 64 * 1024 && (!gbWriteBase64Enable))
+		return -EINVAL;
+
+	if (count < 0)
+		return -EINVAL;
+
+	/*
+	 * if write size to big - error!
+	 */
+	if (count > gbFlashSize - p)
+		return -EINVAL;
+
+
+	if (verify_area(VERIFY_READ, buf, count))
+		return -EFAULT;
+
+
+	written = 0;
+
+	leds_event(led_claim);
+	leds_event(led_green_on);
+
+	nBlock = (int) p >> 16;	//block # of 64K bytes
+
+	/*
+	 * # of 64K blocks to erase and write
+	 */
+	temp = ((int) (p + count) >> 16) - nBlock + 1;
+
+	/*
+	 * write ends at exactly 64k boundry?
+	 */
+	if (((int) (p + count) & 0xFFFF) == 0)
+		temp -= 1;
+
+	if (flashdebug)
+		printk("FlashWrite: writing %d block(s) starting at %d.\n", temp, nBlock);
+
+	for (; temp; temp--, nBlock++) {
+		if (flashdebug)
+			printk("FlashWrite: erasing block %d.\n", nBlock);
+
+		/*
+		 * first we have to erase the block(s), where we will write...
+		 */
+		i = 0;
+		j = 0;
+	  RetryBlock:
+		do {
+			rc = erase_block(nBlock);
+			i++;
+		} while (rc && i < 10);
+
+		if (rc) {
+			if (flashdebug)
+				printk("FlashWrite: erase error %X. Aborting...\n", rc);
+
+			break;
+		}
+		if (flashdebug)
+			printk("FlashWrite: writing offset %X, from buf %X, bytes left %X.\n",
+			       (unsigned int) p, (unsigned int) buf, count - written);
+
+		/*
+		 * write_block will limit write to space left in this block
+		 */
+		rc = write_block(p, buf, count - written);
+		j++;
+
+		/*
+		 * if somehow write verify failed? Can't happen??
+		 */
+		if (!rc) {
+			/*
+			 * retry up to 10 times
+			 */
+			if (j < 10)
+				goto RetryBlock;
+			else
+				/*
+				 * else quit with error...
+				 */
+				rc = -1;
+
+		}
+		if (rc < 0) {
+			if (flashdebug)
+				printk("FlashWrite: write error %X. Aborting...\n", rc);
+			break;
+		}
+		p += rc;
+		buf += rc;
+		written += rc;
+		file->f_pos += rc;
+
+		if (flashdebug)
+			printk("FlashWrite: written 0x%X bytes OK.\n", written);
+	}
+
+	/*
+	 * restore reg on exit
+	 */
+	leds_event(led_release);
+
+	return written;
+}
+
+
+/*
+ * The memory devices use the full 32/64 bits of the offset, and so we cannot
+ * check against negative addresses: they are ok. The return value is weird,
+ * though, in that case (0).
+ *
+ * also note that seeking relative to the "end of file" isn't supported:
+ * it has no meaning, so it returns -EINVAL.
+ */
+static long long flash_llseek(struct file *file, long long offset, int orig)
+{
+	if (flashdebug)
+		printk("Flash_dev: flash_lseek, offset=0x%X, orig=0x%X.\n",
+		       (unsigned int) offset, (unsigned int) orig);
+
+	switch (orig) {
+	case 0:
+		if (offset < 0)
+			return -EINVAL;
+
+		if ((unsigned int) offset > gbFlashSize)
+			return -EINVAL;
+
+		file->f_pos = (unsigned int) offset;
+		return file->f_pos;
+	case 1:
+		if ((file->f_pos + offset) > gbFlashSize)
+			return -EINVAL;
+		if ((file->f_pos + offset) < 0)
+			return -EINVAL;
+		file->f_pos += offset;
+		return file->f_pos;
+	default:
+		return -EINVAL;
+	}
+}
+
+
+/*
+ * assume that main Write routine did the parameter checking...
+ * so just go ahead and erase, what requested!
+ */
+
+MSTATIC int erase_block(int nBlock)
+{
+	volatile unsigned int c1;
+	volatile unsigned char *pWritePtr;
+	int temp, temp1;
+
+	/*
+	 * orange LED == erase
+	 */
+	leds_event(led_amber_on);
+
+	/*
+	 * reset footbridge to the correct offset 0 (...0..3)
+	 */
+	*CSR_ROMWRITEREG = 0;
+
+	/*
+	 * dummy ROM read
+	 */
+	c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
+
+	kick_open();
+	/*
+	 * reset status if old errors
+	 */
+	*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+	/*
+	 * erase a block...
+	 * aim at the middle of a current block...
+	 */
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + 0x8000 + (nBlock << 16)));
+	/*
+	 * dummy read
+	 */
+	c1 = *pWritePtr;
+
+	kick_open();
+	/*
+	 * erase
+	 */
+	*(volatile unsigned char *) pWritePtr = 0x20;
+
+	/*
+	 * confirm
+	 */
+	*(volatile unsigned char *) pWritePtr = 0xD0;
+
+	/*
+	 * wait 10 ms
+	 */
+	flash_wait(HZ / 100);
+
+	/*
+	 * wait while erasing in process (up to 10 sec)
+	 */
+	temp = jiffies + 10 * HZ;
+	c1 = 0;
+	while (!(c1 & 0x80) && time_before(jiffies, temp)) {
+		flash_wait(HZ / 100);
+		/*
+		 * read any address
+		 */
+		c1 = *(volatile unsigned char *) (pWritePtr);
+		//              printk("Flash_erase: status=%X.\n",c1);
+	}
+
+	/*
+	 * set flash for normal read access
+	 */
+	kick_open();
+//      *(volatile unsigned char*)(FLASH_BASE+0x8000) = 0xFF;
+	*(volatile unsigned char *) pWritePtr = 0xFF;	//back to normal operation
+
+	/*
+	 * check if erase errors were reported
+	 */
+	if (c1 & 0x20) {
+		if (flashdebug)
+			printk("Flash_erase: err at %X.\n", (unsigned int) pWritePtr);
+		/*
+		 * reset error
+		 */
+		*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+		return -2;
+	}
+
+	/*
+	 * just to make sure - verify if erased OK...
+	 */
+	flash_wait(HZ / 100);
+
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + (nBlock << 16)));
+
+	for (temp = 0; temp < 16 * 1024; temp++, pWritePtr += 4) {
+		if ((temp1 = *(volatile unsigned int *) pWritePtr) != 0xFFFFFFFF) {
+			if (flashdebug)
+				printk("Flash_erase: verify err at %X = %X.\n",
+				       (unsigned int) pWritePtr, temp1);
+			return -1;
+		}
+	}
+
+	return 0;
+
+}
+
+/*
+ * write_block will limit number of bytes written to the space in this block
+ */
+MSTATIC int write_block(unsigned long p, const char *buf, int count)
+{
+	volatile unsigned int c1;
+	volatile unsigned int c2;
+	unsigned char *pWritePtr;
+	unsigned int uAddress;
+	unsigned int offset;
+	unsigned int timeout;
+	unsigned int timeout1;
+
+	/*
+	 * red LED == write
+	 */
+	leds_event(led_amber_off);
+	leds_event(led_red_on);
+
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
+
+	/*
+	 * check if write will end in this block....
+	 */
+	offset = p & 0xFFFF;
+
+	if (offset + count > 0x10000)
+		count = 0x10000 - offset;
+
+	/*
+	 * wait up to 30 sec for this block
+	 */
+	timeout = jiffies + 30 * HZ;
+
+	for (offset = 0; offset < count; offset++, pWritePtr++) {
+		uAddress = (unsigned int) pWritePtr;
+		uAddress &= 0xFFFFFFFC;
+		if (__get_user(c2, buf + offset))
+			return -EFAULT;
+
+	  WriteRetry:
+	  	/*
+	  	 * dummy read
+	  	 */
+		c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
+
+		/*
+		 * kick open the write gate
+		 */
+		kick_open();
+
+		/*
+		 * program footbridge to the correct offset...0..3
+		 */
+		*CSR_ROMWRITEREG = (unsigned int) pWritePtr & 3;
+
+		/*
+		 * write cmd
+		 */
+		*(volatile unsigned char *) (uAddress) = 0x40;
+
+		/*
+		 * data to write
+		 */
+		*(volatile unsigned char *) (uAddress) = c2;
+
+		/*
+		 * get status
+		 */
+		*(volatile unsigned char *) (FLASH_BASE + 0x10000) = 0x70;
+
+		c1 = 0;
+
+		/*
+		 * wait up to 1 sec for this byte
+		 */
+		timeout1 = jiffies + 1 * HZ;
+
+		/*
+		 * while not ready...
+		 */
+		while (!(c1 & 0x80) && time_before(jiffies, timeout1))
+			c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
+
+		/*
+		 * if timeout getting status
+		 */
+		if (time_after_eq(jiffies, timeout1)) {
+			kick_open();
+			/*
+			 * reset err
+			 */
+			*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+			goto WriteRetry;
+		}
+		/*
+		 * switch on read access, as a default flash operation mode
+		 */
+		kick_open();
+		/*
+		 * read access
+		 */
+		*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
+
+		/*
+		 * if hardware reports an error writing, and not timeout - 
+		 * reset the chip and retry
+		 */
+		if (c1 & 0x10) {
+			kick_open();
+			/*
+			 * reset err
+			 */
+			*(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
+
+			/*
+			 * before timeout?
+			 */
+			if (time_before(jiffies, timeout)) {
+				if (flashdebug)
+					printk("FlashWrite: Retrying write (addr=0x%X)...\n",
+					       (unsigned int) pWritePtr - FLASH_BASE);
+
+				/*
+				 * no LED == waiting
+				 */
+				leds_event(led_amber_off);
+				/*
+				 * wait couple ms
+				 */
+				flash_wait(HZ / 100);
+				/*
+				 * red LED == write
+				 */
+				leds_event(led_red_on);
+
+				goto WriteRetry;
+			} else {
+				printk("Timeout in flash write! (addr=0x%X) Aborting...\n",
+				 (unsigned int) pWritePtr - FLASH_BASE);
+				/*
+				 * return error -2
+				 */
+				return -2;
+
+			}
+		}
+	}
+
+	/*
+	 * green LED == read/verify
+	 */
+	leds_event(led_amber_off);
+	leds_event(led_green_on);
+
+	flash_wait(HZ / 100);
+
+	pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
+
+	for (offset = 0; offset < count; offset++) {
+		char c, c1;
+		if (__get_user(c, buf))
+			return -EFAULT;
+		buf++;
+		if ((c1 = *pWritePtr++) != c) {
+			if (flashdebug)
+				printk("flash write verify error at 0x%X! (%02X!=%02X) Retrying...\n",
+				       (unsigned int) pWritePtr, c1, c);
+			return 0;
+		}
+	}
+
+	return count;
+}
+
+
+MSTATIC void kick_open(void)
+{
+	unsigned long flags;
+
+	/*
+	 * we want to write a bit pattern XXX1 to Xilinx to enable
+	 * the write gate, which will be open for about the next 2ms.
+	 */
+	spin_lock_irqsave(&gpio_lock, flags);
+	cpld_modify(1, 1);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	/*
+	 * let the ISA bus to catch on...
+	 */
+	udelay(25);
+}
+
+MSTATIC int __init nwflash_init(void)
+{
+	int ret = -ENODEV;
+
+	if (machine_is_netwinder()) {
+		int id;
+
+		id = get_flash_id();
+		printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
+		       NWFLASH_VERSION, id, gbFlashSize / (1024 * 1024));
+
+		misc_register(&flash_miscdev);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+MSTATIC void __exit nwflash_exit(void)
+{
+	misc_deregister(&flash_miscdev);
+}
+
+EXPORT_NO_SYMBOLS;
+
+MODULE_PARM(flashdebug, "i");
+
+module_init(nwflash_init);
+module_exit(nwflash_exit);

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)