patch-2.3.51 linux/drivers/sound/lowlevel/awe_hw.h

• Lines: 100
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.3.50/linux/drivers/sound/lowlevel/awe_hw.h
• Orig date: Wed Dec 16 12:52:01 1998

diff -u --recursive --new-file v2.3.50/linux/drivers/sound/lowlevel/awe_hw.h linux/drivers/sound/lowlevel/awe_hw.h
@@ -1,99 +0,0 @@
-/*
- * sound/awe_hw.h
- *
- * Access routines and definitions for the low level driver for the 
- * Creative AWE32/SB32/AWE64 wave table synth.
- *   version 0.4.3; Mar. 1, 1998
- *
- * Copyright (C) 1996-1998 Takashi Iwai
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef AWE_HW_H_DEF
-#define AWE_HW_H_DEF
-
-/*
- * Emu-8000 control registers
- * name(channel)	reg, port
- */
-
-#define awe_cmd_idx(reg,ch)	(((reg)<< 5) | (ch))
-
-#define Data0    0		/* 0x620: doubleword r/w */
-#define Data1    1		/* 0xA20: doubleword r/w */
-#define Data2    2		/* 0xA22: word r/w */
-#define Data3    3		/* 0xE20: word r/w */
-#define Pointer  4		/* 0xE22 register pointer r/w */
-
-#define AWE_CPF(ch)	awe_cmd_idx(0,ch), Data0	/* DW: current pitch and fractional address */
-#define AWE_PTRX(ch)	awe_cmd_idx(1,ch), Data0	/* DW: pitch target and reverb send */
-#define AWE_CVCF(ch)	awe_cmd_idx(2,ch), Data0	/* DW: current volume and filter cutoff */
-#define AWE_VTFT(ch)	awe_cmd_idx(3,ch), Data0	/* DW: volume and filter cutoff targets */
-#define AWE_0080(ch)	awe_cmd_idx(4,ch), Data0	/* DW: ?? */
-#define AWE_00A0(ch)	awe_cmd_idx(5,ch), Data0	/* DW: ?? */
-#define AWE_PSST(ch)	awe_cmd_idx(6,ch), Data0	/* DW: pan send and loop start address */
-#define AWE_CSL(ch)	awe_cmd_idx(7,ch), Data0	/* DW: chorus send and loop end address */
-#define AWE_CCCA(ch)	awe_cmd_idx(0,ch), Data1	/* DW: Q, control bits, and current address */
-#define AWE_HWCF4	awe_cmd_idx(1,9),  Data1	/* DW: config dw 4 */
-#define AWE_HWCF5	awe_cmd_idx(1,10), Data1	/* DW: config dw 5 */
-#define AWE_HWCF6	awe_cmd_idx(1,13), Data1	/* DW: config dw 6 */
-#define AWE_HWCF7	awe_cmd_idx(1,14), Data1	/* DW: config dw 7? (not documented) */
-#define AWE_SMALR	awe_cmd_idx(1,20), Data1	/* DW: sound memory address for left read */
-#define AWE_SMARR	awe_cmd_idx(1,21), Data1	/* DW:    for right read */
-#define AWE_SMALW	awe_cmd_idx(1,22), Data1	/* DW: sound memory address for left write */
-#define AWE_SMARW	awe_cmd_idx(1,23), Data1	/* DW:    for right write */
-#define AWE_SMLD	awe_cmd_idx(1,26), Data1	/* W: sound memory left data */
-#define AWE_SMRD	awe_cmd_idx(1,26), Data2	/* W:    right data */
-#define AWE_WC		awe_cmd_idx(1,27), Data2	/* W: sample counter */
-#define AWE_WC_Cmd	awe_cmd_idx(1,27)
-#define AWE_WC_Port	Data2
-#define AWE_HWCF1	awe_cmd_idx(1,29), Data1	/* W: config w 1 */
-#define AWE_HWCF2	awe_cmd_idx(1,30), Data1	/* W: config w 2 */
-#define AWE_HWCF3	awe_cmd_idx(1,31), Data1	/* W: config w 3 */
-#define AWE_INIT1(ch)	awe_cmd_idx(2,ch), Data1	/* W: init array 1 */
-#define AWE_INIT2(ch)	awe_cmd_idx(2,ch), Data2	/* W: init array 2 */
-#define AWE_INIT3(ch)	awe_cmd_idx(3,ch), Data1	/* W: init array 3 */
-#define AWE_INIT4(ch)	awe_cmd_idx(3,ch), Data2	/* W: init array 4 */
-#define AWE_ENVVOL(ch)	awe_cmd_idx(4,ch), Data1	/* W: volume envelope delay */
-#define AWE_DCYSUSV(ch)	awe_cmd_idx(5,ch), Data1	/* W: volume envelope sustain and decay */
-#define AWE_ENVVAL(ch)	awe_cmd_idx(6,ch), Data1	/* W: modulation envelope delay */
-#define AWE_DCYSUS(ch)	awe_cmd_idx(7,ch), Data1	/* W: modulation envelope sustain and decay */
-#define AWE_ATKHLDV(ch)	awe_cmd_idx(4,ch), Data2	/* W: volume envelope attack and hold */
-#define AWE_LFO1VAL(ch)	awe_cmd_idx(5,ch), Data2	/* W: LFO#1 Delay */
-#define AWE_ATKHLD(ch)	awe_cmd_idx(6,ch), Data2	/* W: modulation envelope attack and hold */
-#define AWE_LFO2VAL(ch)	awe_cmd_idx(7,ch), Data2	/* W: LFO#2 Delay */
-#define AWE_IP(ch)	awe_cmd_idx(0,ch), Data3	/* W: initial pitch */
-#define AWE_IFATN(ch)	awe_cmd_idx(1,ch), Data3	/* W: initial filter cutoff and attenuation */
-#define AWE_PEFE(ch)	awe_cmd_idx(2,ch), Data3	/* W: pitch and filter envelope heights */
-#define AWE_FMMOD(ch)	awe_cmd_idx(3,ch), Data3	/* W: vibrato and filter modulation freq */
-#define AWE_TREMFRQ(ch)	awe_cmd_idx(4,ch), Data3	/* W: LFO#1 tremolo amount and freq */
-#define AWE_FM2FRQ2(ch)	awe_cmd_idx(5,ch), Data3	/* W: LFO#2 vibrato amount and freq */
-
-/* used during detection (returns ROM version?; not documented in ADIP) */
-#define AWE_U1		0xE0, Data3	  /* (R)(W) used in initialization */
-#define AWE_U2(ch)	0xC0+(ch), Data3  /* (W)(W) used in init envelope  */
-
-
-#define AWE_MAX_VOICES		32
-#define AWE_NORMAL_VOICES	30	/*30&31 are reserved for DRAM refresh*/
-
-#define AWE_MAX_CHANNELS	32	/* max midi channels (must >= voices) */
-#define AWE_MAX_LAYERS	AWE_MAX_VOICES	/* maximum number of multiple layers */
-
-#define AWE_DRAM_OFFSET		0x200000
-#define AWE_MAX_DRAM_SIZE	(28 * 1024)	/* 28 MB is max onboard memory */
-
-#endif