patch-2.3.6 linux/include/linux/i2o.h
Next file: linux/include/linux/igmp.h
Previous file: linux/include/linux/fs.h
Back to the patch index
Back to the overall index
- Lines: 589
- Date:
Wed Jun 2 14:40:22 1999
- Orig file:
v2.3.5/linux/include/linux/i2o.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.5/linux/include/linux/i2o.h linux/include/linux/i2o.h
@@ -0,0 +1,588 @@
+#ifndef _I2O_H
+#define _I2O_H
+
+/*
+ * Tunable parameters first
+ */
+
+/* How many different OSM's are we allowing */
+#define MAX_I2O_MODULES 64
+/* How many controllers are we allowing */
+#define MAX_I2O_CONTROLLERS 32
+
+
+#ifdef __KERNEL__ /* ioctl stuff only thing exported to users */
+
+/*
+ * I2O Interface Objects
+ */
+
+#include <linux/notifier.h>
+#include <asm/atomic.h>
+
+/*
+ * message structures
+ */
+
+#define TID_SZ 12
+#define FUNCTION_SZ 8
+
+struct i2o_message
+{
+ u32 version_size;
+ u32 function_addr;
+ u32 initiator_context;
+ /* List follows */
+};
+
+
+/*
+ * Each I2O device entity has one or more of these. There is one
+ * per device. *FIXME* how to handle multiple types on one unit.
+ */
+
+struct i2o_device
+{
+ int class; /* Block, Net, SCSI etc (from spec) */
+ int subclass; /* eth, fddi, tr etc (from spec) */
+ int id; /* I2O ID assigned by the controller */
+ int parent; /* Parent device */
+ int flags; /* Control flags */
+ int i2oversion; /* I2O version supported. Actually there
+ * should be high and low version */
+ struct proc_dir_entry* proc_entry; /* /proc dir */
+ struct i2o_driver *owner; /* Owning device */
+ struct i2o_controller *controller; /* Controlling IOP */
+ struct i2o_device *next; /* Chain */
+ char dev_name[8]; /* linux /dev name if available */
+};
+
+/*
+ * Resource data for each PCI I2O controller
+ */
+
+struct i2o_pci
+{
+ int irq;
+};
+
+/*
+ * Each I2O controller has one of these objects
+ */
+
+struct i2o_controller
+{
+ char name[16];
+ int unit;
+ int status; /* I2O status */
+ int i2oversion;
+ int type;
+#define I2O_TYPE_PCI 0x01 /* PCI I2O controller */
+ struct notifier_block *event_notifer; /* Events */
+ atomic_t users;
+ struct i2o_device *devices; /* I2O device chain */
+ struct i2o_controller *next; /* Controller chain */
+ volatile u32 *post_port; /* Messaging ports */
+ volatile u32 *reply_port;
+ volatile u32 *irq_mask; /* Interrupt port */
+ u32 mem_offset; /* MFA offset */
+ u32 mem_phys; /* MFA physical */
+ u32 priv_mem;
+ u32 priv_mem_size;
+ u32 priv_io;
+ u32 priv_io_size;
+
+ struct proc_dir_entry* proc_entry; /* /proc dir */
+
+ union
+ { /* Bus information */
+ struct i2o_pci pci;
+ } bus;
+ void (*destructor)(struct i2o_controller *); /* Bus specific destructor */
+ int (*bind)(struct i2o_controller *, struct i2o_device *); /* Bus specific attach/detach */
+ int (*unbind)(struct i2o_controller *, struct i2o_device *);
+ void *page_frame; /* Message buffers */
+ int inbound_size; /* Inbound queue size */
+};
+
+struct i2o_handler
+{
+ void (*reply)(struct i2o_handler *, struct i2o_controller *, struct i2o_message *);
+ char *name;
+ int context; /* Low 8 bits of the transaction info */
+ /* User data follows */
+};
+
+/*
+ * Messenger inlines
+ */
+
+extern inline u32 I2O_POST_READ32(struct i2o_controller *c)
+{
+ return *c->post_port;
+}
+
+extern inline void I2O_POST_WRITE32(struct i2o_controller *c, u32 Val)
+{
+ *c->post_port = Val;
+}
+
+
+extern inline u32 I2O_REPLY_READ32(struct i2o_controller *c)
+{
+ return *c->reply_port;
+}
+
+extern inline void I2O_REPLY_WRITE32(struct i2o_controller *c, u32 Val)
+{
+ *c->reply_port= Val;
+}
+
+
+extern inline u32 I2O_IRQ_READ32(struct i2o_controller *c)
+{
+ return *c->irq_mask;
+}
+
+extern inline void I2O_IRQ_WRITE32(struct i2o_controller *c, u32 Val)
+{
+ *c->irq_mask = Val;
+}
+
+
+extern inline void i2o_post_message(struct i2o_controller *c, u32 m)
+{
+ /* The second line isnt spurious - thats forcing PCI posting */
+ I2O_POST_WRITE32(c,m);
+ (void) I2O_IRQ_READ32(c);
+}
+
+extern inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
+{
+ I2O_REPLY_WRITE32(c,m);
+}
+
+
+struct i2o_controller *i2o_controller_chain;
+
+extern int i2o_quiesce_controller(struct i2o_controller *);
+extern int i2o_clear_controller(struct i2o_controller *);
+extern int i2o_install_controller(struct i2o_controller *);
+extern int i2o_delete_controller(struct i2o_controller *);
+extern int i2o_activate_controller(struct i2o_controller *);
+extern void i2o_unlock_controller(struct i2o_controller *);
+extern struct i2o_controller *i2o_find_controller(int);
+extern int i2o_num_controllers;
+
+extern int i2o_install_handler(struct i2o_handler *);
+extern int i2o_remove_handler(struct i2o_handler *);
+
+extern int i2o_install_device(struct i2o_controller *, struct i2o_device *);
+extern int i2o_delete_device(struct i2o_device *);
+extern int i2o_claim_device(struct i2o_device *, struct i2o_driver *);
+extern int i2o_release_device(struct i2o_device *);
+
+extern int i2o_post_this(struct i2o_controller *, int, u32 *, int);
+extern int i2o_post_wait(struct i2o_controller *, int, u32 *, int, int *, int);
+extern int i2o_issue_claim(struct i2o_controller *, int, int, int, int *);
+extern int i2o_query_scalar(struct i2o_controller *, int, int, int, int, void *,
+ int, int *);
+extern int i2o_params_set(struct i2o_controller *c, int, int, int, int, void *,
+ int, int *);
+
+extern void i2o_run_queue(struct i2o_controller *);
+
+extern void i2o_report_status(const char *, const char *, u8, u8, u16);
+extern void report_common_status(u8);
+extern void report_lan_dsc(u16);
+
+extern u32 i2o_wait_message(struct i2o_controller *, char *);
+
+extern const char *i2o_get_class_name(int);
+
+
+/*
+ * I2O classes / subclasses
+ */
+
+/* Class ID and Code Assignments
+ * (LCT.ClassID.Version field)
+ */
+#define I2O_CLASS_VERSION_10 0x00
+#define I2O_CLASS_VERSION_11 0x01
+
+/* Class code names
+ * (from v1.5 Table 6-1 Class Code Assignments.)
+ */
+
+#define I2O_CLASS_EXECUTIVE 0x000
+#define I2O_CLASS_DDM 0x001
+#define I2O_CLASS_RANDOM_BLOCK_STORAGE 0x010
+#define I2O_CLASS_SEQUENTIAL_STORAGE 0x011
+#define I2O_CLASS_LAN 0x020
+#define I2O_CLASS_WAN 0x030
+#define I2O_CLASS_FIBRE_CHANNEL_PORT 0x040
+#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL 0x041
+#define I2O_CLASS_SCSI_PERIPHERAL 0x051
+#define I2O_CLASS_ATE_PORT 0x060
+#define I2O_CLASS_ATE_PERIPHERAL 0x061
+#define I2O_CLASS_FLOPPY_CONTROLLER 0x070
+#define I2O_CLASS_FLOPPY_DEVICE 0x071
+#define I2O_CLASS_BUS_ADAPTER_PORT 0x080
+#define I2O_CLASS_PEER_TRANSPORT_AGENT 0x090
+#define I2O_CLASS_PEER_TRANSPORT 0x091
+
+/* Rest of 0x092 - 0x09f reserved for peer-to-peer classes
+ */
+
+#define I2O_CLASS_MATCH_ANYCLASS 0xffffffff
+
+/* Subclasses
+ */
+
+#define I2O_SUBCLASS_i960 0x001
+#define I2O_SUBCLASS_HDM 0x020
+#define I2O_SUBCLASS_ISM 0x021
+
+/* Operation functions */
+
+#define I2O_PARAMS_FIELD_GET 0x0001
+#define I2O_PARAMS_LIST_GET 0x0002
+#define I2O_PARAMS_MORE_GET 0x0003
+#define I2O_PARAMS_SIZE_GET 0x0004
+#define I2O_PARAMS_TABLE_GET 0x0005
+#define I2O_PARAMS_FIELD_SET 0x0006
+#define I2O_PARAMS_LIST_SET 0x0007
+#define I2O_PARAMS_ROW_ADD 0x0008
+#define I2O_PARAMS_ROW_DELETE 0x0009
+#define I2O_PARAMS_TABLE_CLEAR 0x000A
+
+/*
+ * I2O serial number conventions / formats
+ * (circa v1.5)
+ */
+
+#define I2O_SNFORMAT_UNKNOWN 0
+#define I2O_SNFORMAT_BINARY 1
+#define I2O_SNFORMAT_ASCII 2
+#define I2O_SNFORMAT_UNICODE 3
+#define I2O_SNFORMAT_LAN48_MAC 4
+#define I2O_SNFORMAT_WAN 5
+
+/* Plus new in v2.0 (Yellowstone pdf doc)
+ */
+
+#define I2O_SNFORMAT_LAN64_MAC 6
+#define I2O_SNFORMAT_DDM 7
+#define I2O_SNFORMAT_IEEE_REG64 8
+#define I2O_SNFORMAT_IEEE_REG128 9
+#define I2O_SNFORMAT_UNKNOWN2 0xff
+
+
+/*
+ * "Special" TID assignments
+ */
+#define I2O_IOP_TID 0
+#define I2O_HOST_TID 1
+
+
+/* Transaction Reply Lists (TRL) Control Word structure */
+
+#define TRL_SINGLE_FIXED_LENGTH 0x00
+#define TRL_SINGLE_VARIABLE_LENGTH 0x40
+#define TRL_MULTIPLE_FIXED_LENGTH 0x80
+
+/* LAN Class specific functions */
+
+#define LAN_PACKET_SEND 0x3B
+#define LAN_SDU_SEND 0x3D
+#define LAN_RECEIVE_POST 0x3E
+#define LAN_RESET 0x35
+#define LAN_SUSPEND 0x37
+
+/*
+ * Messaging API values
+ */
+
+#define I2O_CMD_ADAPTER_ASSIGN 0xB3
+#define I2O_CMD_ADAPTER_READ 0xB2
+#define I2O_CMD_ADAPTER_RELEASE 0xB5
+#define I2O_CMD_BIOS_INFO_SET 0xA5
+#define I2O_CMD_BOOT_DEVICE_SET 0xA7
+#define I2O_CMD_CONFIG_VALIDATE 0xBB
+#define I2O_CMD_CONN_SETUP 0xCA
+#define I2O_CMD_DDM_DESTROY 0xB1
+#define I2O_CMD_DDM_ENABLE 0xD5
+#define I2O_CMD_DDM_QUIESCE 0xC7
+#define I2O_CMD_DDM_RESET 0xD9
+#define I2O_CMD_DDM_SUSPEND 0xAF
+#define I2O_CMD_DEVICE_ASSIGN 0xB7
+#define I2O_CMD_DEVICE_RELEASE 0xB9
+#define I2O_CMD_HRT_GET 0xA8
+#define I2O_CMD_ADAPTER_CLEAR 0xBE
+#define I2O_CMD_ADAPTER_CONNECT 0xC9
+#define I2O_CMD_ADAPTER_RESET 0xBD
+#define I2O_CMD_LCT_NOTIFY 0xA2
+#define I2O_CMD_OUTBOUND_INIT 0xA1
+#define I2O_CMD_PATH_ENABLE 0xD3
+#define I2O_CMD_PATH_QUIESCE 0xC5
+#define I2O_CMD_PATH_RESET 0xD7
+#define I2O_CMD_STATIC_MF_CREATE 0xDD
+#define I2O_CMD_STATIC_MF_RELEASE 0xDF
+#define I2O_CMD_STATUS_GET 0xA0
+#define I2O_CMD_SW_DOWNLOAD 0xA9
+#define I2O_CMD_SW_UPLOAD 0xAB
+#define I2O_CMD_SW_REMOVE 0xAD
+#define I2O_CMD_SYS_ENABLE 0xD1
+#define I2O_CMD_SYS_MODIFY 0xC1
+#define I2O_CMD_SYS_QUIESCE 0xC3
+#define I2O_CMD_SYS_TAB_SET 0xA3
+
+#define I2O_CMD_UTIL_NOP 0x00
+#define I2O_CMD_UTIL_ABORT 0x01
+#define I2O_CMD_UTIL_CLAIM 0x09
+#define I2O_CMD_UTIL_RELEASE 0x0B
+#define I2O_CMD_UTIL_PARAMS_GET 0x06
+#define I2O_CMD_UTIL_PARAMS_SET 0x05
+#define I2O_CMD_UTIL_EVT_REGISTER 0x13
+#define I2O_CMD_UTIL_ACK 0x14
+#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10
+#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D
+#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F
+#define I2O_CMD_UTIL_LOCK 0x17
+#define I2O_CMD_UTIL_LOCK_RELEASE 0x19
+#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15
+
+#define I2O_CMD_SCSI_EXEC 0x81
+#define I2O_CMD_SCSI_ABORT 0x83
+#define I2O_CMD_SCSI_BUSRESET 0x27
+
+#define I2O_CMD_BLOCK_READ 0x30
+#define I2O_CMD_BLOCK_WRITE 0x31
+#define I2O_CMD_BLOCK_CFLUSH 0x37
+#define I2O_CMD_BLOCK_MLOCK 0x49
+#define I2O_CMD_BLOCK_MUNLOCK 0x4B
+#define I2O_CMD_BLOCK_MMOUNT 0x41
+#define I2O_CMD_BLOCK_MEJECT 0x43
+
+#define I2O_PRIVATE_MSG 0xFF
+
+/*
+ * Init Outbound Q status
+ */
+
+#define I2O_CMD_OUTBOUND_INIT_IN_PROGRESS 0x01
+#define I2O_CMD_OUTBOUND_INIT_REJECTED 0x02
+#define I2O_CMD_OUTBOUND_INIT_FAILED 0x03
+#define I2O_CMD_OUTBOUND_INIT_COMPLETE 0x04
+
+/*
+ * I2O Get Status State values
+ */
+
+#define ADAPTER_STATE_INITIALIZING 0x01
+#define ADAPTER_STATE_RESET 0x02
+#define ADAPTER_STATE_HOLD 0x04
+#define ADAPTER_STATE_READY 0x05
+#define ADAPTER_STATE_OPERATIONAL 0x08
+#define ADAPTER_STATE_FAILED 0x10
+#define ADAPTER_STATE_FAULTED 0x11
+
+/* I2O API function return values */
+
+#define I2O_RTN_NO_ERROR 0
+#define I2O_RTN_NOT_INIT 1
+#define I2O_RTN_FREE_Q_EMPTY 2
+#define I2O_RTN_TCB_ERROR 3
+#define I2O_RTN_TRANSACTION_ERROR 4
+#define I2O_RTN_ADAPTER_ALREADY_INIT 5
+#define I2O_RTN_MALLOC_ERROR 6
+#define I2O_RTN_ADPTR_NOT_REGISTERED 7
+#define I2O_RTN_MSG_REPLY_TIMEOUT 8
+#define I2O_RTN_NO_STATUS 9
+#define I2O_RTN_NO_FIRM_VER 10
+#define I2O_RTN_NO_LINK_SPEED 11
+
+/* Reply message status defines for all messages */
+
+#define I2O_REPLY_STATUS_SUCCESS 0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
+#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
+#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
+#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
+#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06
+#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08
+#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
+#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A
+#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B
+#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80
+
+/* Status codes and Error Information for Parameter functions */
+
+#define I2O_PARAMS_STATUS_SUCCESS 0x00
+#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
+#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03
+#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04
+#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05
+#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06
+#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07
+#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08
+#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09
+#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A
+#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B
+#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C
+#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D
+#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E
+#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F
+#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10
+
+/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
+ * messages: Table 3-2 Detailed Status Codes.*/
+
+#define I2O_DSC_SUCCESS 0x0000
+#define I2O_DSC_BAD_KEY 0x0002
+#define I2O_DSC_TCL_ERROR 0x0003
+#define I2O_DSC_REPLY_BUFFER_FULL 0x0004
+#define I2O_DSC_NO_SUCH_PAGE 0x0005
+#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006
+#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007
+#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009
+#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A
+#define I2O_DSC_DEVICE_LOCKED 0x000B
+#define I2O_DSC_DEVICE_RESET 0x000C
+#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D
+#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E
+#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F
+#define I2O_DSC_INVALID_OFFSET 0x0010
+#define I2O_DSC_INVALID_PARAMETER 0x0011
+#define I2O_DSC_INVALID_REQUEST 0x0012
+#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013
+#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014
+#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015
+#define I2O_DSC_MISSING_PARAMETER 0x0016
+#define I2O_DSC_TIMEOUT 0x0017
+#define I2O_DSC_UNKNOWN_ERROR 0x0018
+#define I2O_DSC_UNKNOWN_FUNCTION 0x0019
+#define I2O_DSC_UNSUPPORTED_VERSION 0x001A
+#define I2O_DSC_DEVICE_BUSY 0x001B
+#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C
+
+/* Message header defines for VersionOffset */
+#define I2OVER15 0x0001
+#define I2OVER20 0x0002
+/* Default is 1.5, FIXME: Need support for both 1.5 and 2.0 */
+#define I2OVERSION I2OVER15
+#define SGL_OFFSET_0 I2OVERSION
+#define SGL_OFFSET_4 (0x0040 | I2OVERSION)
+#define SGL_OFFSET_5 (0x0050 | I2OVERSION)
+#define SGL_OFFSET_6 (0x0060 | I2OVERSION)
+#define SGL_OFFSET_8 (0x0080 | I2OVERSION)
+#define SGL_OFFSET_10 (0x00A0 | I2OVERSION)
+
+#define TRL_OFFSET_5 (0x0050 | I2OVERSION)
+#define TRL_OFFSET_6 (0x0060 | I2OVERSION)
+
+ /* msg header defines for MsgFlags */
+#define MSG_STATIC 0x0100
+#define MSG_64BIT_CNTXT 0x0200
+#define MSG_MULTI_TRANS 0x1000
+#define MSG_FAIL 0x2000
+#define MSG_LAST 0x4000
+#define MSG_REPLY 0x8000
+
+ /* normal LAN request message MsgFlags and VersionOffset (0x1041) */
+#define LAN_MSG_REQST (MSG_MULTI_TRANS | SGL_OFFSET_4)
+
+ /* minimum size msg */
+#define THREE_WORD_MSG_SIZE 0x00030000
+#define FOUR_WORD_MSG_SIZE 0x00040000
+#define FIVE_WORD_MSG_SIZE 0x00050000
+#define SIX_WORD_MSG_SIZE 0x00060000
+#define SEVEN_WORD_MSG_SIZE 0x00070000
+#define EIGHT_WORD_MSG_SIZE 0x00080000
+#define NINE_WORD_MSG_SIZE 0x00090000
+#define TEN_WORD_MSG_SIZE 0x000A0000
+#define I2O_MESSAGE_SIZE(x) ((x)<<16)
+
+
+/* Special TID Assignments */
+
+#define ADAPTER_TID 0
+#define HOST_TID 1
+
+#define MSG_FRAME_SIZE 128
+#define NMBR_MSG_FRAMES 128
+
+#define MSG_POOL_SIZE 16384
+
+#define I2O_POST_WAIT_OK 1
+#define I2O_POST_WAIT_TIMEOUT -1
+
+#endif /* __KERNEL__ */
+
+#include <asm/ioctl.h>
+
+/*
+ * I2O Control IOCTLs and structures
+ */
+#define I2O_MAGIC_NUMBER 'i'
+#define I2OGETIOPS _IO(I2O_MAGIC_NUMBER,0)
+#define I2OHRTGET _IO(I2O_MAGIC_NUMBER,1)
+#define I2OLCTGET _IO(I2O_MAGIC_NUMBER,2)
+#define I2OPARMSET _IO(I2O_MAGIC_NUMBER,3)
+#define I2OPARMGET _IO(I2O_MAGIC_NUMBER,4)
+#define I2OSWDL _IO(I2O_MAGIC_NUMBER,5)
+#define I2OSWUL _IO(I2O_MAGIC_NUMBER,6)
+#define I2OSWDEL _IO(I2O_MAGIC_NUMBER,7)
+#define I2OHTML _IO(I2O_MAGIC_NUMBER,8)
+
+/* On hold until we figure this out
+#define I2OEVTREG _IO(I2O_MAGIC_NUMBER,9)
+#define I2OEVTCLR _IO(I2O_MAGIC_NUMBER,10)
+#define I2OEVTGET _IO(I2O_MAGIC_NUMBER,11)
+ */
+
+struct i2o_cmd_hrtlct
+{
+ unsigned int iop; /* IOP unit number */
+ void *resbuf; /* Buffer for result */
+ unsigned int *reslen; /* Buffer length in bytes */
+};
+
+
+struct i2o_cmd_psetget
+{
+ unsigned int iop; /* IOP unit number */
+ unsigned int tid; /* Target device TID */
+ void *opbuf; /* Operation List buffer */
+ unsigned int oplen; /* Operation List buffer length in bytes */
+ void *resbuf; /* Result List buffer */
+ unsigned int *reslen; /* Result List buffer length in bytes */
+};
+
+struct i2o_sw_xfer
+{
+ unsigned int iop; /* IOP unit number */
+ unsigned char dl_flags; /* DownLoadFlags field */
+ unsigned char sw_type; /* Software type */
+ unsigned int sw_id; /* Software ID */
+ void *buf; /* Pointer to software buffer */
+ unsigned int *swlen; /* Length of software data */
+ unsigned int *maxfrag; /* Maximum fragment count */
+ unsigned int *curfrag; /* Current fragment count */
+};
+
+struct i2o_html
+{
+ unsigned int iop; /* IOP unit number */
+ unsigned int tid; /* Target device ID */
+ unsigned int page; /* HTML page */
+ void *resbuf; /* Buffer for reply HTML page */
+ unsigned int *reslen; /* Length in bytes of reply buffer */
+ void *qbuf; /* Pointer to HTTP query string */
+ unsigned int qlen; /* Length in bytes of query string buffer */
+};
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)