patch-2.3.7 linux/drivers/block/icside.c

Next file: linux/drivers/block/ll_rw_blk.c
Previous file: linux/drivers/block/Config.in
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.6/linux/drivers/block/icside.c linux/drivers/block/icside.c
@@ -0,0 +1,634 @@
+/*
+ * linux/drivers/block/icside.c
+ *
+ * Copyright (c) 1996,1997 Russell King.
+ *
+ * Changelog:
+ *  08-Jun-1996	RMK	Created
+ *  12-Sep-1997	RMK	Added interrupt enable/disable
+ *  17-Apr-1999	RMK	Added support for V6 EASI
+ *  22-May-1999	RMK	Added support for V6 DMA
+ */
+
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/blkdev.h>
+#include <linux/errno.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+
+#include <asm/dma.h>
+#include <asm/ecard.h>
+#include <asm/io.h>
+
+/*
+ * Maximum number of interfaces per card
+ */
+#define MAX_IFS	2
+
+#define ICS_IDENT_OFFSET		0x8a0
+
+#define ICS_ARCIN_V5_INTRSTAT		0x000
+#define ICS_ARCIN_V5_INTROFFSET		0x001
+#define ICS_ARCIN_V5_IDEOFFSET		0xa00
+#define ICS_ARCIN_V5_IDEALTOFFSET	0xae0
+#define ICS_ARCIN_V5_IDESTEPPING	4
+
+#define ICS_ARCIN_V6_IDEOFFSET_1	0x800
+#define ICS_ARCIN_V6_INTROFFSET_1	0x880
+#define ICS_ARCIN_V6_INTRSTAT_1		0x8a4
+#define ICS_ARCIN_V6_IDEALTOFFSET_1	0x8e0
+#define ICS_ARCIN_V6_IDEOFFSET_2	0xc00
+#define ICS_ARCIN_V6_INTROFFSET_2	0xc80
+#define ICS_ARCIN_V6_INTRSTAT_2		0xca4
+#define ICS_ARCIN_V6_IDEALTOFFSET_2	0xce0
+#define ICS_ARCIN_V6_IDESTEPPING	4
+
+struct cardinfo {
+	unsigned int dataoffset;
+	unsigned int ctrloffset;
+	unsigned int stepping;
+};
+
+static struct cardinfo icside_cardinfo_v5 = {
+	ICS_ARCIN_V5_IDEOFFSET,
+	ICS_ARCIN_V5_IDEALTOFFSET,
+	ICS_ARCIN_V5_IDESTEPPING
+};
+
+static struct cardinfo icside_cardinfo_v6_1 = {
+	ICS_ARCIN_V6_IDEOFFSET_1,
+	ICS_ARCIN_V6_IDEALTOFFSET_1,
+	ICS_ARCIN_V6_IDESTEPPING
+};
+
+static struct cardinfo icside_cardinfo_v6_2 = {
+	ICS_ARCIN_V6_IDEOFFSET_2,
+	ICS_ARCIN_V6_IDEALTOFFSET_2,
+	ICS_ARCIN_V6_IDESTEPPING
+};
+
+static const card_ids icside_cids[] = {
+	{ MANU_ICS,  PROD_ICS_IDE  },
+	{ MANU_ICS2, PROD_ICS2_IDE },
+	{ 0xffff, 0xffff }
+};
+
+typedef enum {
+	ics_if_unknown,
+	ics_if_arcin_v5,
+	ics_if_arcin_v6
+} iftype_t;
+
+/* ---------------- Version 5 PCB Support Functions --------------------- */
+/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose  : enable interrupts from card
+ */
+static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+	unsigned int memc_port = (unsigned int)ec->irq_data;
+	outb (0, memc_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose  : disable interrupts from card
+ */
+static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+	unsigned int memc_port = (unsigned int)ec->irq_data;
+	inb (memc_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+static const expansioncard_ops_t icside_ops_arcin_v5 = {
+	icside_irqenable_arcin_v5,
+	icside_irqdisable_arcin_v5,
+	NULL,
+	NULL,
+	NULL,
+	NULL
+};
+
+
+/* ---------------- Version 6 PCB Support Functions --------------------- */
+/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose  : enable interrupts from card
+ */
+static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+	unsigned int ide_base_port = (unsigned int)ec->irq_data;
+
+	outb (0, ide_base_port + ICS_ARCIN_V6_INTROFFSET_1);
+	outb (0, ide_base_port + ICS_ARCIN_V6_INTROFFSET_2);
+}
+
+/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose  : disable interrupts from card
+ */
+static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+	unsigned int ide_base_port = (unsigned int)ec->irq_data;
+
+	inb (ide_base_port + ICS_ARCIN_V6_INTROFFSET_1);
+	inb (ide_base_port + ICS_ARCIN_V6_INTROFFSET_2);
+}
+
+/* Prototype: icside_irqprobe(struct expansion_card *ec)
+ * Purpose  : detect an active interrupt from card
+ */
+static int icside_irqpending_arcin_v6(struct expansion_card *ec)
+{
+	unsigned int ide_base_port = (unsigned int)ec->irq_data;
+
+	return inb(ide_base_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
+	       inb(ide_base_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
+}
+
+static const expansioncard_ops_t icside_ops_arcin_v6 = {
+	icside_irqenable_arcin_v6,
+	icside_irqdisable_arcin_v6,
+	icside_irqpending_arcin_v6,
+	NULL,
+	NULL,
+	NULL
+};
+
+/* Prototype: icside_identifyif (struct expansion_card *ec)
+ * Purpose  : identify IDE interface type
+ * Notes    : checks the description string
+ */
+static iftype_t icside_identifyif (struct expansion_card *ec)
+{
+	unsigned int addr;
+	iftype_t iftype;
+	int id = 0;
+
+	iftype = ics_if_unknown;
+
+	addr = ecard_address (ec, ECARD_IOC, ECARD_FAST) + ICS_IDENT_OFFSET;
+
+	id = inb (addr) & 1;
+	id |= (inb (addr + 1) & 1) << 1;
+	id |= (inb (addr + 2) & 1) << 2;
+	id |= (inb (addr + 3) & 1) << 3;
+
+	switch (id) {
+	case 0: /* A3IN */
+		printk("icside: A3IN unsupported\n");
+		break;
+
+	case 1: /* A3USER */
+		printk("icside: A3USER unsupported\n");
+		break;
+
+	case 3:	/* ARCIN V6 */
+		printk(KERN_DEBUG "icside: detected ARCIN V6 in slot %d\n", ec->slot_no);
+		iftype = ics_if_arcin_v6;
+		break;
+
+	case 15:/* ARCIN V5 (no id) */
+		printk(KERN_DEBUG "icside: detected ARCIN V5 in slot %d\n", ec->slot_no);
+		iftype = ics_if_arcin_v5;
+		break;
+
+	default:/* we don't know - complain very loudly */
+		printk("icside: ***********************************\n");
+		printk("icside: *** UNKNOWN ICS INTERFACE id=%d ***\n", id);
+		printk("icside: ***********************************\n");
+		printk("icside: please report this to linux@arm.linux.org.uk\n");
+		printk("icside: defaulting to ARCIN V5\n");
+		iftype = ics_if_arcin_v5;
+		break;
+	}
+
+	return iftype;
+}
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
+/*
+ * SG-DMA support.
+ *
+ * Similar to the BM-DMA, but we use the RiscPCs IOMD
+ * DMA controllers.  There is only one DMA controller
+ * per card, which means that only one drive can be
+ * accessed at one time.  NOTE! We do not inforce that
+ * here, but we rely on the main IDE driver spotting
+ * that both interfaces use the same IRQ, which should
+ * guarantee this.
+ *
+ * We are limited by the drives IOR/IOW pulse time.
+ * The closest that we can get to the requirements is
+ * a type C cycle for both mode 1 and mode 2.  However,
+ * this does give a burst of 8MB/s.
+ *
+ * This has been tested with a couple of Conner
+ * Peripherals 1080MB CFS1081A drives, one on each
+ * interface, which deliver about 2MB/s each.  I
+ * believe that this is limited by the lack of
+ * on-board drive cache.
+ */
+#define TABLE_SIZE 2048
+
+static int
+icside_build_dmatable(ide_drive_t *drive, int reading)
+{
+	struct request *rq = HWGROUP(drive)->rq;
+	struct buffer_head *bh = rq->bh;
+	unsigned long addr, size;
+	unsigned char *virt_addr;
+	unsigned int count = 0;
+	dmasg_t *sg = (dmasg_t *)HWIF(drive)->dmatable;
+
+	do {
+		if (bh == NULL) {
+			/* paging requests have (rq->bh == NULL) */
+			virt_addr = rq->buffer;
+			addr = virt_to_bus (virt_addr);
+			size = rq->nr_sectors << 9;
+		} else {
+			/* group sequential buffers into one large buffer */
+			virt_addr = bh->b_data;
+			addr = virt_to_bus (virt_addr);
+			size = bh->b_size;
+			while ((bh = bh->b_reqnext) != NULL) {
+				if ((addr + size) != virt_to_bus (bh->b_data))
+					break;
+				size += bh->b_size;
+			}
+		}
+
+		if (addr & 3) {
+			printk("%s: misaligned DMA buffer\n", drive->name);
+			return 0;
+		}
+
+		if (size) {
+			if (reading)
+				dma_cache_inv((unsigned int)virt_addr, size);
+			else
+				dma_cache_wback((unsigned int)virt_addr, size);
+		}
+
+		sg[count].address = addr;
+		sg[count].length = size;
+		if (++count >= (TABLE_SIZE / sizeof(dmasg_t))) {
+			printk("%s: DMA table too small\n", drive->name);
+			return 0;
+		}
+	} while (bh != NULL);
+
+	if (!count)
+		printk("%s: empty DMA table?\n", drive->name);
+
+	return count;
+}
+
+static int
+icside_config_drive(ide_drive_t *drive, int mode)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	int speed, err;
+
+	if (mode == 2) {
+		speed = XFER_MW_DMA_2;
+		drive->drive_data = 250;
+	} else {
+		speed = XFER_MW_DMA_1;
+		drive->drive_data = 250;
+	}
+
+	/*
+	 * Don't use ide_wait_cmd here - it will
+	 * attempt to set_geometry and recalibrate,
+	 * but for some reason these don't work at
+	 * this point (lost interrupt).
+	 */
+	SELECT_DRIVE(hwif, drive);
+	OUT_BYTE(drive->ctl | 2, IDE_CONTROL_REG);
+	OUT_BYTE(speed, IDE_NSECTOR_REG);
+	OUT_BYTE(SETFEATURES_XFER, IDE_FEATURE_REG);
+	OUT_BYTE(WIN_SETFEATURES, IDE_COMMAND_REG);
+
+	err = ide_wait_stat(drive, DRIVE_READY,
+			    BUSY_STAT|DRQ_STAT|ERR_STAT, WAIT_CMD);
+
+	if (err == 0) {
+		drive->id->dma_mword &= 0x00ff;
+		drive->id->dma_mword |= 256 << mode;
+	} else
+		drive->drive_data = 0;
+
+	return err;
+}
+
+static int
+icside_dma_check(ide_drive_t *drive)
+{
+	struct hd_driveid *id = drive->id;
+	ide_hwif_t *hwif = HWIF(drive);
+	int autodma = hwif->autodma;
+
+	if (id && (id->capability & 1) && autodma) {
+		int dma_mode = 0;
+
+		/* Consult the list of known "bad" drives */
+		if (ide_dmaproc(ide_dma_bad_drive, drive))
+			return hwif->dmaproc(ide_dma_off, drive);
+
+		/* Enable DMA on any drive that has
+		 * UltraDMA (mode 0/1/2) enabled
+		 */
+		if (id->field_valid & 4 && id->dma_ultra & 7)
+			dma_mode = 2;
+		
+		/* Enable DMA on any drive that has mode1
+		 * or mode2 multiword DMA enabled
+		 */
+		if (id->field_valid & 2 && id->dma_mword & 6)
+			dma_mode = id->dma_mword & 4 ? 2 : 1;
+
+		/* Consult the list of known "good" drives */
+		if (ide_dmaproc(ide_dma_good_drive, drive))
+			dma_mode = 1;
+
+		if (dma_mode &&	icside_config_drive(drive, dma_mode) == 0)
+			return hwif->dmaproc(ide_dma_on, drive);
+	}
+	return hwif->dmaproc(ide_dma_off_quietly, drive);
+}
+
+static int
+icside_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	int count, reading = 0;
+
+	switch (func) {
+	case ide_dma_check:
+		return icside_dma_check(drive);
+
+	case ide_dma_read:
+		reading = 1;
+	case ide_dma_write:
+		count = icside_build_dmatable(drive, reading);
+		if (!count)
+			return 1;
+		disable_dma(hwif->hw.dma);
+
+		/* Route the DMA signals to
+		 * to the correct interface.
+		 */
+		outb(hwif->select_data, hwif->config_data);
+
+		/* Select the correct timing
+		 * for this drive
+		 */
+		set_dma_speed(hwif->hw.dma, drive->drive_data);
+
+		set_dma_sg(hwif->hw.dma, (dmasg_t *)hwif->dmatable, count);
+		set_dma_mode(hwif->hw.dma, reading ? DMA_MODE_READ
+			     : DMA_MODE_WRITE);
+
+		drive->waiting_for_dma = 1;
+		if (drive->media != ide_disk)
+			return 0;
+
+		ide_set_handler(drive, &ide_dma_intr, WAIT_CMD);
+		OUT_BYTE(reading ? WIN_READDMA : WIN_WRITEDMA,
+			 IDE_COMMAND_REG);
+
+	case ide_dma_begin:
+		enable_dma(hwif->hw.dma);
+		return 0;
+
+	case ide_dma_end:
+		drive->waiting_for_dma = 0;
+		disable_dma(hwif->hw.dma);
+		return get_dma_residue(hwif->hw.dma) != 0;
+
+	case ide_dma_test_irq:
+		return inb((unsigned long)hwif->hw.priv) & 1;
+
+	default:
+		return ide_dmaproc(func, drive);
+	}
+}
+
+static unsigned long
+icside_alloc_dmatable(void)
+{
+	static unsigned long dmatable;
+	static unsigned int leftover;
+	unsigned long table;
+
+	if (leftover < TABLE_SIZE) {
+#if PAGE_SIZE == TABLE_SIZE * 2
+		dmatable = __get_free_pages(GFP_KERNEL, 1);
+		leftover = PAGE_SIZE;
+#else
+		dmatable = kmalloc(TABLE_SIZE, GFP_KERNEL);
+		leftover = TABLE_SIZE;
+#endif
+	}
+
+	table = dmatable;
+	if (table) {
+		dmatable += TABLE_SIZE;
+		leftover -= TABLE_SIZE;
+	}
+
+	return table;
+}
+
+static int
+icside_setup_dma(ide_hwif_t *hwif, int autodma)
+{
+	unsigned long table = icside_alloc_dmatable();
+
+	printk("    %s: SG-DMA", hwif->name);
+
+	if (!table)
+		printk(" -- ERROR, unable to allocate DMA table\n");
+	else {
+		hwif->dmatable = (void *)table;
+		hwif->dmaproc = icside_dmaproc;
+		hwif->autodma = autodma;
+
+		printk(" capable%s\n", autodma ?
+			", auto-enable" : "");
+	}
+
+	return hwif->dmatable != NULL;
+}
+#endif
+
+static ide_hwif_t *
+icside_find_hwif(unsigned long dataport)
+{
+	ide_hwif_t *hwif;
+	int index;
+
+	for (index = 0; index < MAX_HWIFS; ++index) {
+		hwif = &ide_hwifs[index];
+		if (hwif->hw.io_ports[IDE_DATA_OFFSET] == (ide_ioreg_t)dataport)
+			goto found;
+	}
+
+	for (index = 0; index < MAX_HWIFS; ++index) {
+		hwif = &ide_hwifs[index];
+		if (!hwif->hw.io_ports[IDE_DATA_OFFSET])
+			goto found;
+	}
+
+	return NULL;
+found:
+	return hwif;
+}
+
+static ide_hwif_t *
+icside_setup(unsigned long base, struct cardinfo *info, int irq)
+{
+	unsigned long port = base + info->dataoffset;
+	ide_hwif_t *hwif;
+
+	hwif = icside_find_hwif(base);
+	if (hwif) {
+		int i;
+
+		memset(&hwif->hw, 0, sizeof(hw_regs_t));
+
+		for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+			hwif->hw.io_ports[i] = (ide_ioreg_t)port;
+			port += 1 << info->stepping;
+		}
+		hwif->hw.io_ports[IDE_CONTROL_OFFSET] = base + info->ctrloffset;
+		hwif->hw.irq  = irq;
+		hwif->hw.dma  = NO_DMA;
+		hwif->noprobe = 0;
+		hwif->chipset = ide_acorn;
+	}
+
+	return hwif;
+}
+
+static int icside_register_v5(struct expansion_card *ec, int autodma)
+{
+	unsigned long slot_port;
+	ide_hwif_t *hwif;
+
+	slot_port = ecard_address(ec, ECARD_MEMC, 0);
+
+	ec->irqaddr  = (unsigned char *)ioaddr(slot_port + ICS_ARCIN_V5_INTRSTAT);
+	ec->irqmask  = 1;
+	ec->irq_data = (void *)slot_port;
+	ec->ops      = (expansioncard_ops_t *)&icside_ops_arcin_v5;
+
+	/*
+	 * Be on the safe side - disable interrupts
+	 */
+	inb(slot_port + ICS_ARCIN_V5_INTROFFSET);
+
+	hwif = icside_setup(slot_port, &icside_cardinfo_v5, ec->irq);
+
+	return hwif ? 0 : -1;
+}
+
+static int icside_register_v6(struct expansion_card *ec, int autodma)
+{
+	unsigned long slot_port, port;
+	ide_hwif_t *hwif, *mate;
+	int sel = 0;
+
+	slot_port = ecard_address(ec, ECARD_IOC, ECARD_FAST);
+	port      = ecard_address(ec, ECARD_EASI, ECARD_FAST);
+
+	if (port == 0)
+		port = slot_port;
+	else
+		sel = 1 << 5;
+
+	outb(sel, slot_port);
+
+	ec->irq_data = (void *)port;
+	ec->ops      = (expansioncard_ops_t *)&icside_ops_arcin_v6;
+
+	/*
+	 * Be on the safe side - disable interrupts
+	 */
+	inb(port + ICS_ARCIN_V6_INTROFFSET_1);
+	inb(port + ICS_ARCIN_V6_INTROFFSET_2);
+
+	hwif = icside_setup(port, &icside_cardinfo_v6_1, ec->irq);
+	mate = icside_setup(port, &icside_cardinfo_v6_2, ec->irq);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
+	if (ec->dma != NO_DMA) {
+		if (request_dma(ec->dma, hwif->name))
+			goto no_dma;
+
+		if (hwif) {
+			hwif->config_data = slot_port;
+			hwif->select_data = sel;
+			hwif->hw.dma  = ec->dma;
+			hwif->hw.priv = (void *)
+					(port + ICS_ARCIN_V6_INTRSTAT_1);
+			hwif->channel = 0;
+			icside_setup_dma(hwif, autodma);
+		}
+		if (mate) {
+			mate->config_data = slot_port;
+			mate->select_data = sel | 1;
+			mate->hw.dma  = ec->dma;
+			mate->hw.priv = (void *)
+					(port + ICS_ARCIN_V6_INTRSTAT_2);
+			mate->channel = 1;
+			icside_setup_dma(mate, autodma);
+		}
+	}
+#endif
+
+no_dma:
+	return hwif || mate ? 0 : -1;
+}
+
+int icside_init(void)
+{
+	int autodma = 0;
+
+#ifdef CONFIG_IDEDMA_ICS_AUTO
+	autodma = 1;
+#endif
+
+	ecard_startfind ();
+
+	do {
+		struct expansion_card *ec;
+		int result;
+
+		ec = ecard_find(0, icside_cids);
+		if (ec == NULL)
+			break;
+
+		ecard_claim(ec);
+
+		switch (icside_identifyif(ec)) {
+		case ics_if_arcin_v5:
+			result = icside_register_v5(ec, autodma);
+			break;
+
+		case ics_if_arcin_v6:
+			result = icside_register_v6(ec, autodma);
+			break;
+
+		default:
+			result = -1;
+			break;
+		}
+
+		if (result)
+			ecard_release(ec);
+	} while (1);
+
+	return 0;
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)