patch-2.3.9 linux/arch/mips/kernel/r2300_switch.S

Next file: linux/arch/mips/kernel/r4k_fpu.S
Previous file: linux/arch/mips/kernel/r2300_misc.S
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.8/linux/arch/mips/kernel/r2300_switch.S linux/arch/mips/kernel/r2300_switch.S
@@ -1,12 +1,15 @@
-/*
- * r2300_switch.S: R3000/R2000 specific task switching code.
+/* $Id: r2300_switch.S,v 1.6 1999/06/13 16:30:32 ralf Exp $
+ *
+ * r2300_switch.S: R2300 specific task switching code.
  *
- * Copyright (C) 1994, 1995, 1996 by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 by Andreas Busse
  *
  * Multi-cpu abstraction and macros for easier reading:
  * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
  *
- * $Id: r2300_switch.S,v 1.4 1998/04/04 13:59:38 ralf Exp $
+ * Further modifications to make this work:
+ * Copyright (c) 1998 Harald Koerfgen
  */
 #include <asm/asm.h>
 #include <asm/bootinfo.h>
@@ -15,6 +18,7 @@
 #include <asm/fpregdef.h>
 #include <asm/mipsconfig.h>
 #include <asm/mipsregs.h>
+#include <asm/offset.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -23,68 +27,137 @@
 
 #include <asm/asmmacro.h>
 
-/* XXX The following is fucking losing... find a better way dave. */
-MODE_ALIAS	=	0x00e0			# uncachable, dirty, valid
-
-	.text
 	.set	mips1
-	.set	noreorder
+	.align	5
+
 /*
- * Code necessary to switch tasks on an Linux/MIPS machine.
- * FIXME: We don't need to disable interrupts anymore.
+ * task_struct *r4xx0_resume(task_struct *prev,
+ *                           task_struct *next)
  */
-	.align	5
-	LEAF(r2300_resume)
-	mfc0	t1,CP0_STATUS		# Save status register
-	sw	t1,THREAD_STATUS($28)
-	ori	t2,t1,0x1f		# Disable interrupts
-	xori	t2,0x1e
-	mtc0	t2,CP0_STATUS
-	CPU_SAVE_NONSCRATCH($28)
-	sll	t2,t1,2			# Save floating point state
-	bgez	t2,1f
-	 sw	ra,THREAD_REG31($28)
-	FPU_SAVE($28, t0)
-1:
-	move	$28, a0
-	lw	t0,THREAD_PGDIR($28)	# Switch the root pointer
-	li	t1,TLB_ROOT		# get PFN
-	mtc0	t1,CP0_ENTRYHI
-	mtc0	zero,CP0_INDEX
-	srl	t0,12			# PFN is 12 bits west
-	ori	t0,MODE_ALIAS		# want uncachable, dirty, valid
-	mtc0	t0,CP0_ENTRYLO0
-	lw	a2,THREAD_STATUS($28)
-	tlbwi
-
-	/* Flush TLB. */
-	mfc0	t3,CP0_STATUS		# disable interrupts...
-	ori	t4,t3,1
-	xori	t4,1
-	mtc0	t4,CP0_STATUS
-	lw      t0,mips_tlb_entries
-	mtc0	zero,CP0_ENTRYLO0
-1:
-	subu	t0,1
-	mtc0	t0,CP0_INDEX
-	lui	t1,0x0008
-	or	t1,t0,t1
-	sll	t1,12
-	mtc0	t1,CP0_ENTRYHI
-	bne	t2,t0,1b
-	 tlbwi
-
-	ori	t1,a2,1			# Restore FPU, pipeline magic
-	xori	t1,1
-	mtc0	t1,CP0_STATUS
-	sll	t0,a2,2
-	bgez	t0,1f
-	 lw	ra,THREAD_REG31($28)
-	FPU_RESTORE($28, t0)
-1:
+LEAF(r2300_resume)
+	.set	reorder
+	mfc0	t1, CP0_STATUS
+	.set	noreorder
+	sw	t1, THREAD_STATUS(a0)
+	CPU_SAVE_NONSCRATCH(a0)
+	sw	ra, THREAD_REG31(a0)
+
+	/*
+	 * The order of restoring the registers takes care of the race
+	 * updating $28, $29 and kernelsp without disabling ints.
+	 */
+	move	$28, a1
 	CPU_RESTORE_NONSCRATCH($28)
 	addiu	t0, $28, KERNEL_STACK_SIZE-32
-	sw	t0,kernelsp
+	sw	t0, kernelsp
+	mfc0	t1, CP0_STATUS		/* Do we really need this? */
+	li	a3, 0xff00
+	and	t1, a3
+	lw	a2, THREAD_STATUS($28)
+	nor	a3, $0, a3
+	and	a2, a3
+	lw	a3, TASK_MM($28)
+	or	a2, t1
+	lw	a3, MM_CONTEXT(a3)
+	mtc0	a2, CP0_STATUS
+	andi	a3, 0xfc0
+	mtc0	a3, CP0_ENTRYHI
 	jr	ra
-	 mtc0	a2,CP0_STATUS			# Restore status register
+	 move	v0, a0
 	END(r2300_resume)
+
+/*
+ * Do lazy fpu context switch.  Saves FPU context to the process in a0
+ * and loads the new context of the current process.
+ */
+
+#define ST_OFF (KERNEL_STACK_SIZE - 32 - PT_SIZE + PT_STATUS)
+
+LEAF(r2300_lazy_fpu_switch)
+	mfc0	t0, CP0_STATUS			# enable cp1
+	li	t3, 0x20000000
+	or	t0, t3
+	mtc0	t0, CP0_STATUS
+
+	beqz	a0, 2f				# Save floating point state
+	 nor	t3, zero, t3
+	.set	reorder
+	lw	t1, ST_OFF(a0)			# last thread looses fpu
+	.set	noreorder
+	and	t1, t3
+	sw	t1, ST_OFF(a0)
+	swc1	$f0, (THREAD_FPU + 0x00)(a0)
+	FPU_SAVE(a0, t1)			# clobbers t1
+
+2:
+	lwc1	$f0, (THREAD_FPU + 0x00)($28)
+	.set	reorder
+	FPU_RESTORE($28, t0)		# clobbers t0
+	jr	ra
+	END(r2300_lazy_fpu_switch)
+
+/*
+ * Save a thread's fp context.
+ */
+	.set	noreorder
+LEAF(r2300_save_fp)
+	FPU_SAVE(a0, t1)			# clobbers t1
+	jr	ra
+	 swc1	$f0, (THREAD_FPU + 0x00)(a0)
+	END(r2300_save_fp)
+
+/*
+ * Load the FPU with signalling NANS.  This bit pattern we're using has
+ * the property that no matter wether considered as single or as double
+ * precission represents signaling NANS.
+ *
+ * We initialize fcr31 to rounding to nearest, no exceptions.
+ */
+
+#define FPU_DEFAULT  0x00000000
+
+LEAF(r2300_init_fpu)
+	mfc0	t0, CP0_STATUS
+	li	t1, 0x20000000
+	or	t0, t1
+	mtc0	t0, CP0_STATUS
+
+	li	t1, FPU_DEFAULT
+	ctc1	t1, fcr31
+
+	li	t0, -1
+
+	mtc1	t0, $f0
+	mtc1	t0, $f1
+	mtc1	t0, $f2
+	mtc1	t0, $f3
+	mtc1	t0, $f4
+	mtc1	t0, $f5
+	mtc1	t0, $f6
+	mtc1	t0, $f7
+	mtc1	t0, $f8
+	mtc1	t0, $f9
+	mtc1	t0, $f10
+	mtc1	t0, $f11
+	mtc1	t0, $f12
+	mtc1	t0, $f13
+	mtc1	t0, $f14
+	mtc1	t0, $f15
+	mtc1	t0, $f16
+	mtc1	t0, $f17
+	mtc1	t0, $f18
+	mtc1	t0, $f19
+	mtc1	t0, $f20
+	mtc1	t0, $f21
+	mtc1	t0, $f22
+	mtc1	t0, $f23
+	mtc1	t0, $f24
+	mtc1	t0, $f25
+	mtc1	t0, $f26
+	mtc1	t0, $f27
+	mtc1	t0, $f28
+	mtc1	t0, $f29
+	mtc1	t0, $f30
+	jr	ra
+	 mtc1	t0, $f31
+	END(r2300_init_fpu)

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)