patch-2.3.99-pre1 linux/drivers/block/icside.c

• Lines: 644
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.3.51/linux/drivers/block/icside.c
• Orig date: Sun Feb 20 21:12:38 2000

diff -u --recursive --new-file v2.3.51/linux/drivers/block/icside.c linux/drivers/block/icside.c
@@ -1,643 +0,0 @@
-/*
- * linux/drivers/block/icside.c
- *
- * Copyright (c) 1996,1997 Russell King.
- *
- * Changelog:
- *  08-Jun-1996	RMK	Created
- *  12-Sep-1997	RMK	Added interrupt enable/disable
- *  17-Apr-1999	RMK	Added support for V6 EASI
- *  22-May-1999	RMK	Added support for V6 DMA
- */
-
-#include <linux/config.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/malloc.h>
-#include <linux/blkdev.h>
-#include <linux/errno.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-
-#include <asm/dma.h>
-#include <asm/ecard.h>
-#include <asm/io.h>
-
-extern char *ide_xfer_verbose (byte xfer_rate);
-
-/*
- * Maximum number of interfaces per card
- */
-#define MAX_IFS	2
-
-#define ICS_IDENT_OFFSET		0x8a0
-
-#define ICS_ARCIN_V5_INTRSTAT		0x000
-#define ICS_ARCIN_V5_INTROFFSET		0x001
-#define ICS_ARCIN_V5_IDEOFFSET		0xa00
-#define ICS_ARCIN_V5_IDEALTOFFSET	0xae0
-#define ICS_ARCIN_V5_IDESTEPPING	4
-
-#define ICS_ARCIN_V6_IDEOFFSET_1	0x800
-#define ICS_ARCIN_V6_INTROFFSET_1	0x880
-#define ICS_ARCIN_V6_INTRSTAT_1		0x8a4
-#define ICS_ARCIN_V6_IDEALTOFFSET_1	0x8e0
-#define ICS_ARCIN_V6_IDEOFFSET_2	0xc00
-#define ICS_ARCIN_V6_INTROFFSET_2	0xc80
-#define ICS_ARCIN_V6_INTRSTAT_2		0xca4
-#define ICS_ARCIN_V6_IDEALTOFFSET_2	0xce0
-#define ICS_ARCIN_V6_IDESTEPPING	4
-
-struct cardinfo {
-	unsigned int dataoffset;
-	unsigned int ctrloffset;
-	unsigned int stepping;
-};
-
-static struct cardinfo icside_cardinfo_v5 = {
-	ICS_ARCIN_V5_IDEOFFSET,
-	ICS_ARCIN_V5_IDEALTOFFSET,
-	ICS_ARCIN_V5_IDESTEPPING
-};
-
-static struct cardinfo icside_cardinfo_v6_1 = {
-	ICS_ARCIN_V6_IDEOFFSET_1,
-	ICS_ARCIN_V6_IDEALTOFFSET_1,
-	ICS_ARCIN_V6_IDESTEPPING
-};
-
-static struct cardinfo icside_cardinfo_v6_2 = {
-	ICS_ARCIN_V6_IDEOFFSET_2,
-	ICS_ARCIN_V6_IDEALTOFFSET_2,
-	ICS_ARCIN_V6_IDESTEPPING
-};
-
-static const card_ids icside_cids[] = {
-	{ MANU_ICS,  PROD_ICS_IDE  },
-	{ MANU_ICS2, PROD_ICS2_IDE },
-	{ 0xffff, 0xffff }
-};
-
-typedef enum {
-	ics_if_unknown,
-	ics_if_arcin_v5,
-	ics_if_arcin_v6
-} iftype_t;
-
-/* ---------------- Version 5 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose  : enable interrupts from card
- */
-static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
-	unsigned int memc_port = (unsigned int)ec->irq_data;
-	outb (0, memc_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
- * Purpose  : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
-{
-	unsigned int memc_port = (unsigned int)ec->irq_data;
-	inb (memc_port + ICS_ARCIN_V5_INTROFFSET);
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v5 = {
-	icside_irqenable_arcin_v5,
-	icside_irqdisable_arcin_v5,
-	NULL,
-	NULL,
-	NULL,
-	NULL
-};
-
-
-/* ---------------- Version 6 PCB Support Functions --------------------- */
-/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose  : enable interrupts from card
- */
-static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
-	unsigned int ide_base_port = (unsigned int)ec->irq_data;
-
-	outb (0, ide_base_port + ICS_ARCIN_V6_INTROFFSET_1);
-	outb (0, ide_base_port + ICS_ARCIN_V6_INTROFFSET_2);
-}
-
-/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
- * Purpose  : disable interrupts from card
- */
-static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
-{
-	unsigned int ide_base_port = (unsigned int)ec->irq_data;
-
-	inb (ide_base_port + ICS_ARCIN_V6_INTROFFSET_1);
-	inb (ide_base_port + ICS_ARCIN_V6_INTROFFSET_2);
-}
-
-/* Prototype: icside_irqprobe(struct expansion_card *ec)
- * Purpose  : detect an active interrupt from card
- */
-static int icside_irqpending_arcin_v6(struct expansion_card *ec)
-{
-	unsigned int ide_base_port = (unsigned int)ec->irq_data;
-
-	return inb(ide_base_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
-	       inb(ide_base_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
-}
-
-static const expansioncard_ops_t icside_ops_arcin_v6 = {
-	icside_irqenable_arcin_v6,
-	icside_irqdisable_arcin_v6,
-	icside_irqpending_arcin_v6,
-	NULL,
-	NULL,
-	NULL
-};
-
-/* Prototype: icside_identifyif (struct expansion_card *ec)
- * Purpose  : identify IDE interface type
- * Notes    : checks the description string
- */
-static iftype_t icside_identifyif (struct expansion_card *ec)
-{
-	unsigned int addr;
-	iftype_t iftype;
-	int id = 0;
-
-	iftype = ics_if_unknown;
-
-	addr = ecard_address (ec, ECARD_IOC, ECARD_FAST) + ICS_IDENT_OFFSET;
-
-	id = inb (addr) & 1;
-	id |= (inb (addr + 1) & 1) << 1;
-	id |= (inb (addr + 2) & 1) << 2;
-	id |= (inb (addr + 3) & 1) << 3;
-
-	switch (id) {
-	case 0: /* A3IN */
-		printk("icside: A3IN unsupported\n");
-		break;
-
-	case 1: /* A3USER */
-		printk("icside: A3USER unsupported\n");
-		break;
-
-	case 3:	/* ARCIN V6 */
-		printk(KERN_DEBUG "icside: detected ARCIN V6 in slot %d\n", ec->slot_no);
-		iftype = ics_if_arcin_v6;
-		break;
-
-	case 15:/* ARCIN V5 (no id) */
-		printk(KERN_DEBUG "icside: detected ARCIN V5 in slot %d\n", ec->slot_no);
-		iftype = ics_if_arcin_v5;
-		break;
-
-	default:/* we don't know - complain very loudly */
-		printk("icside: ***********************************\n");
-		printk("icside: *** UNKNOWN ICS INTERFACE id=%d ***\n", id);
-		printk("icside: ***********************************\n");
-		printk("icside: please report this to linux@arm.linux.org.uk\n");
-		printk("icside: defaulting to ARCIN V5\n");
-		iftype = ics_if_arcin_v5;
-		break;
-	}
-
-	return iftype;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
-/*
- * SG-DMA support.
- *
- * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
- * There is only one DMA controller per card, which means that only
- * one drive can be accessed at one time.  NOTE! We do not enforce that
- * here, but we rely on the main IDE driver spotting that both
- * interfaces use the same IRQ, which should guarantee this.
- */
-#define TABLE_SIZE 2048
-
-static int
-icside_build_dmatable(ide_drive_t *drive, int reading)
-{
-	struct request *rq = HWGROUP(drive)->rq;
-	struct buffer_head *bh = rq->bh;
-	unsigned long addr, size;
-	unsigned char *virt_addr;
-	unsigned int count = 0;
-	dmasg_t *sg = (dmasg_t *)HWIF(drive)->dmatable_cpu;
-
-	do {
-		if (bh == NULL) {
-			/* paging requests have (rq->bh == NULL) */
-			virt_addr = rq->buffer;
-			addr = virt_to_bus (virt_addr);
-			size = rq->nr_sectors << 9;
-		} else {
-			/* group sequential buffers into one large buffer */
-			virt_addr = bh->b_data;
-			addr = virt_to_bus (virt_addr);
-			size = bh->b_size;
-			while ((bh = bh->b_reqnext) != NULL) {
-				if ((addr + size) != virt_to_bus (bh->b_data))
-					break;
-				size += bh->b_size;
-			}
-		}
-
-		if (addr & 3) {
-			printk("%s: misaligned DMA buffer\n", drive->name);
-			return 0;
-		}
-
-		if (size) {
-			if (reading)
-				dma_cache_inv((unsigned int)virt_addr, size);
-			else
-				dma_cache_wback((unsigned int)virt_addr, size);
-		}
-
-		sg[count].address = addr;
-		sg[count].length = size;
-		if (++count >= (TABLE_SIZE / sizeof(dmasg_t))) {
-			printk("%s: DMA table too small\n", drive->name);
-			return 0;
-		}
-	} while (bh != NULL);
-
-	if (!count)
-		printk("%s: empty DMA table?\n", drive->name);
-
-	return count;
-}
-
-static int
-icside_config_if(ide_drive_t *drive, int xfer_mode)
-{
-	int func = ide_dma_off;
-
-	switch (xfer_mode) {
-	case XFER_MW_DMA_2:
-		/*
-		 * The cycle time is limited to 250ns by the r/w
-		 * pulse width (90ns), however we should still
-		 * have a maximum burst transfer rate of 8MB/s.
-		 */
-		drive->drive_data = 250;
-		break;
-
-	case XFER_MW_DMA_1:
-		drive->drive_data = 250;
-		break;
-
-	case XFER_MW_DMA_0:
-		drive->drive_data = 480;
-		break;
-
-	default:
-		drive->drive_data = 0;
-		break;
-	}
-
-	if (drive->drive_data &&
-	    ide_config_drive_speed(drive, (byte) xfer_mode) == 0)
-		func = ide_dma_on;
-	else
-		drive->drive_data = 480;
-
-	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
-		ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
-
-	return func;
-}
-
-static int
-icside_dma_check(ide_drive_t *drive)
-{
-	struct hd_driveid *id = drive->id;
-	ide_hwif_t *hwif = HWIF(drive);
-	int autodma = hwif->autodma;
-	int xfer_mode = XFER_PIO_2;
-	int func = ide_dma_off_quietly;
-
-	if (!id || !(id->capability & 1) || !autodma)
-		goto out;
-
-	/*
-	 * Consult the list of known "bad" drives
-	 */
-	if (ide_dmaproc(ide_dma_bad_drive, drive)) {
-		func = ide_dma_off;
-		goto out;
-	}
-
-	/*
-	 * Enable DMA on any drive that has multiword DMA
-	 */
-	if (id->field_valid & 2) {
-		if (id->dma_mword & 4) {
-			xfer_mode = XFER_MW_DMA_2;
-			func = ide_dma_on;
-		} else if (id->dma_mword & 2) {
-			xfer_mode = XFER_MW_DMA_1;
-			func = ide_dma_on;
-		} else if (id->dma_mword & 1) {
-			xfer_mode = XFER_MW_DMA_0;
-			func = ide_dma_on;
-		}
-		goto out;
-	}
-
-	/*
-	 * Consult the list of known "good" drives
-	 */
-	if (ide_dmaproc(ide_dma_good_drive, drive)) {
-		if (id->eide_dma_time > 150)
-			goto out;
-		xfer_mode = XFER_MW_DMA_1;
-		func = ide_dma_on;
-	}
-
-out:
-	func = icside_config_if(drive, xfer_mode);
-
-	return hwif->dmaproc(func, drive);
-}
-
-static int
-icside_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	int count, reading = 0;
-
-	switch (func) {
-	case ide_dma_check:
-		return icside_dma_check(drive);
-
-	case ide_dma_read:
-		reading = 1;
-	case ide_dma_write:
-		count = icside_build_dmatable(drive, reading);
-		if (!count)
-			return 1;
-		disable_dma(hwif->hw.dma);
-
-		/* Route the DMA signals to
-		 * to the correct interface.
-		 */
-		outb(hwif->select_data, hwif->config_data);
-
-		/* Select the correct timing
-		 * for this drive
-		 */
-		set_dma_speed(hwif->hw.dma, drive->drive_data);
-
-		set_dma_sg(hwif->hw.dma, (dmasg_t *)hwif->dmatable_cpu, count);
-		set_dma_mode(hwif->hw.dma, reading ? DMA_MODE_READ
-			     : DMA_MODE_WRITE);
-
-		drive->waiting_for_dma = 1;
-		if (drive->media != ide_disk)
-			return 0;
-
-		ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL);
-		OUT_BYTE(reading ? WIN_READDMA : WIN_WRITEDMA,
-			 IDE_COMMAND_REG);
-
-	case ide_dma_begin:
-		enable_dma(hwif->hw.dma);
-		return 0;
-
-	case ide_dma_end:
-		drive->waiting_for_dma = 0;
-		disable_dma(hwif->hw.dma);
-		return get_dma_residue(hwif->hw.dma) != 0;
-
-	case ide_dma_test_irq:
-		return inb((unsigned long)hwif->hw.priv) & 1;
-
-	default:
-		return ide_dmaproc(func, drive);
-	}
-}
-
-static unsigned long
-icside_alloc_dmatable(void)
-{
-	static unsigned long dmatable;
-	static unsigned int leftover;
-	unsigned long table;
-
-	if (leftover < TABLE_SIZE) {
-#if PAGE_SIZE == TABLE_SIZE * 2
-		dmatable = __get_free_pages(GFP_KERNEL, 1);
-		leftover = PAGE_SIZE;
-#else
-		dmatable = kmalloc(TABLE_SIZE, GFP_KERNEL);
-		leftover = TABLE_SIZE;
-#endif
-	}
-
-	table = dmatable;
-	if (table) {
-		dmatable += TABLE_SIZE;
-		leftover -= TABLE_SIZE;
-	}
-
-	return table;
-}
-
-static int
-icside_setup_dma(ide_hwif_t *hwif, int autodma)
-{
-	unsigned long table = icside_alloc_dmatable();
-
-	printk("    %s: SG-DMA", hwif->name);
-
-	if (!table)
-		printk(" -- ERROR, unable to allocate DMA table\n");
-	else {
-		hwif->dmatable_cpu = (void *)table;
-		hwif->dmaproc = icside_dmaproc;
-		hwif->autodma = autodma;
-
-		printk(" capable%s\n", autodma ?
-			", auto-enable" : "");
-	}
-
-	return hwif->dmatable_cpu != NULL;
-}
-#endif
-
-static ide_hwif_t *
-icside_find_hwif(unsigned long dataport)
-{
-	ide_hwif_t *hwif;
-	int index;
-
-	for (index = 0; index < MAX_HWIFS; ++index) {
-		hwif = &ide_hwifs[index];
-		if (hwif->hw.io_ports[IDE_DATA_OFFSET] == (ide_ioreg_t)dataport)
-			goto found;
-	}
-
-	for (index = 0; index < MAX_HWIFS; ++index) {
-		hwif = &ide_hwifs[index];
-		if (!hwif->hw.io_ports[IDE_DATA_OFFSET])
-			goto found;
-	}
-
-	return NULL;
-found:
-	return hwif;
-}
-
-static ide_hwif_t *
-icside_setup(unsigned long base, struct cardinfo *info, int irq)
-{
-	unsigned long port = base + info->dataoffset;
-	ide_hwif_t *hwif;
-
-	hwif = icside_find_hwif(base);
-	if (hwif) {
-		int i;
-
-		memset(&hwif->hw, 0, sizeof(hw_regs_t));
-
-		for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
-			hwif->hw.io_ports[i] = (ide_ioreg_t)port;
-			port += 1 << info->stepping;
-		}
-		hwif->hw.io_ports[IDE_CONTROL_OFFSET] = base + info->ctrloffset;
-		hwif->hw.irq  = irq;
-		hwif->hw.dma  = NO_DMA;
-		hwif->noprobe = 0;
-		hwif->chipset = ide_acorn;
-	}
-
-	return hwif;
-}
-
-static int icside_register_v5(struct expansion_card *ec, int autodma)
-{
-	unsigned long slot_port;
-	ide_hwif_t *hwif;
-
-	slot_port = ecard_address(ec, ECARD_MEMC, 0);
-
-	ec->irqaddr  = (unsigned char *)ioaddr(slot_port + ICS_ARCIN_V5_INTRSTAT);
-	ec->irqmask  = 1;
-	ec->irq_data = (void *)slot_port;
-	ec->ops      = (expansioncard_ops_t *)&icside_ops_arcin_v5;
-
-	/*
-	 * Be on the safe side - disable interrupts
-	 */
-	inb(slot_port + ICS_ARCIN_V5_INTROFFSET);
-
-	hwif = icside_setup(slot_port, &icside_cardinfo_v5, ec->irq);
-
-	return hwif ? 0 : -1;
-}
-
-static int icside_register_v6(struct expansion_card *ec, int autodma)
-{
-	unsigned long slot_port, port;
-	ide_hwif_t *hwif, *mate;
-	int sel = 0;
-
-	slot_port = ecard_address(ec, ECARD_IOC, ECARD_FAST);
-	port      = ecard_address(ec, ECARD_EASI, ECARD_FAST);
-
-	if (port == 0)
-		port = slot_port;
-	else
-		sel = 1 << 5;
-
-	outb(sel, slot_port);
-
-	ec->irq_data = (void *)port;
-	ec->ops      = (expansioncard_ops_t *)&icside_ops_arcin_v6;
-
-	/*
-	 * Be on the safe side - disable interrupts
-	 */
-	inb(port + ICS_ARCIN_V6_INTROFFSET_1);
-	inb(port + ICS_ARCIN_V6_INTROFFSET_2);
-
-	hwif = icside_setup(port, &icside_cardinfo_v6_1, ec->irq);
-	mate = icside_setup(port, &icside_cardinfo_v6_2, ec->irq);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
-	if (ec->dma != NO_DMA) {
-		if (request_dma(ec->dma, hwif->name))
-			goto no_dma;
-
-		if (hwif) {
-			hwif->config_data = slot_port;
-			hwif->select_data = sel;
-			hwif->hw.dma  = ec->dma;
-			hwif->hw.priv = (void *)
-					(port + ICS_ARCIN_V6_INTRSTAT_1);
-			hwif->channel = 0;
-			icside_setup_dma(hwif, autodma);
-		}
-		if (mate) {
-			mate->config_data = slot_port;
-			mate->select_data = sel | 1;
-			mate->hw.dma  = ec->dma;
-			mate->hw.priv = (void *)
-					(port + ICS_ARCIN_V6_INTRSTAT_2);
-			mate->channel = 1;
-			icside_setup_dma(mate, autodma);
-		}
-	}
-#endif
-
-no_dma:
-	return hwif || mate ? 0 : -1;
-}
-
-int icside_init(void)
-{
-	int autodma = 0;
-
-#ifdef CONFIG_IDEDMA_ICS_AUTO
-	autodma = 1;
-#endif
-
-	ecard_startfind ();
-
-	do {
-		struct expansion_card *ec;
-		int result;
-
-		ec = ecard_find(0, icside_cids);
-		if (ec == NULL)
-			break;
-
-		ecard_claim(ec);
-
-		switch (icside_identifyif(ec)) {
-		case ics_if_arcin_v5:
-			result = icside_register_v5(ec, autodma);
-			break;
-
-		case ics_if_arcin_v6:
-			result = icside_register_v6(ec, autodma);
-			break;
-
-		default:
-			result = -1;
-			break;
-		}
-
-		if (result)
-			ecard_release(ec);
-	} while (1);
-
-	return 0;
-}