patch-2.3.99-pre1 linux/drivers/ide/cy82c693.c

Next file: linux/drivers/ide/dtc2278.c
Previous file: linux/drivers/ide/cs5530.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.51/linux/drivers/ide/cy82c693.c linux/drivers/ide/cy82c693.c
@@ -0,0 +1,441 @@
+/*
+ * linux/drivers/block/cy82c693.c		Version 0.34	Dec. 13, 1999
+ *
+ *  Copyright (C) 1998-99 Andreas S. Krebs (akrebs@altavista.net), Maintainer
+ *  Copyright (C) 1998-99 Andre Hedrick, Integrater
+ *
+ * CYPRESS CY82C693 chipset IDE controller
+ *
+ * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
+ * Writting the driver was quite simple, since most of the job is
+ * done by the generic pci-ide support. 
+ * The hard part was finding the CY82C693's datasheet on Cypress's
+ * web page :-(. But Altavista solved this problem :-).
+ *
+ *
+ * Notes:
+ * - I recently got a 16.8G IBM DTTA, so I was able to test it with
+ *   a large and fast disk - the results look great, so I'd say the
+ *   driver is working fine :-)
+ *   hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA 
+ * - this is my first linux driver, so there's probably a lot  of room 
+ *   for optimizations and bug fixing, so feel free to do it.
+ * - use idebus=xx parameter to set PCI bus speed - needed to calc
+ *   timings for PIO modes (default will be 40)
+ * - if using PIO mode it's a good idea to set the PIO mode and 
+ *   32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
+ * - I had some problems with my IBM DHEA with PIO modes < 2
+ *   (lost interrupts) ?????
+ * - first tests with DMA look okay, they seem to work, but there is a
+ *   problem with sound - the BusMaster IDE TimeOut should fixed this
+ *
+ *
+ * History:
+ * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
+ * ASK@1999-01-23: v0.33 made a few minor code clean ups
+ *                       removed DMA clock speed setting by default
+ *                       added boot message
+ * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
+ *                       added support to set DMA Controller Clock Speed
+ * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes on some drive
+ * ASK@1998-10-29: v0.3 added support to set DMA modes
+ * ASK@1998-10-28: v0.2 added support to set PIO modes
+ * ASK@1998-10-27: v0.1 first version - chipset detection
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+
+#include "ide_modes.h"
+
+/* the current version */
+#define CY82_VERSION	"CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
+
+/*
+ *	The following are used to debug the driver.
+ */
+#define	CY82C693_DEBUG_LOGS	0
+#define	CY82C693_DEBUG_INFO	0
+
+/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */
+#undef CY82C693_SETDMA_CLOCK
+
+/*
+ * note: the value for busmaster timeout is tricky and i got it by trial and error !
+ *       using a to low value will cause DMA timeouts and drop IDE performance
+ *       using a to high value will cause audio playback to scatter
+ *       if you know a better value or how to calc it, please let me know 
+ */
+#define BUSMASTER_TIMEOUT	0x50	/* twice the value written in cy82c693ub datasheet */
+/*
+ * the value above was tested on my machine and it seems to work okay
+ */
+
+/* here are the offset definitions for the registers */
+#define CY82_IDE_CMDREG		0x04
+#define CY82_IDE_ADDRSETUP	0x48
+#define CY82_IDE_MASTER_IOR	0x4C	
+#define CY82_IDE_MASTER_IOW	0x4D	
+#define CY82_IDE_SLAVE_IOR	0x4E	
+#define CY82_IDE_SLAVE_IOW	0x4F
+#define CY82_IDE_MASTER_8BIT	0x50	
+#define CY82_IDE_SLAVE_8BIT	0x51	
+
+#define CY82_INDEX_PORT		0x22
+#define CY82_DATA_PORT		0x23
+
+#define CY82_INDEX_CTRLREG1	0x01
+#define CY82_INDEX_CHANNEL0	0x30
+#define CY82_INDEX_CHANNEL1	0x31
+#define CY82_INDEX_TIMEOUT	0x32
+
+/* the max PIO mode - from datasheet */
+#define CY82C693_MAX_PIO	4
+
+/* the min and max PCI bus speed in MHz - from datasheet */
+#define CY82C963_MIN_BUS_SPEED	25
+#define CY82C963_MAX_BUS_SPEED	33
+
+/* the struct for the PIO mode timings */
+typedef struct pio_clocks_s {
+        byte	address_time;		/* Address setup (clocks) */
+	byte	time_16r;		/* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
+	byte	time_16w;		/* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
+	byte	time_8;			/* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
+} pio_clocks_t;
+
+/*
+ * calc clocks using bus_speed
+ * returns (rounded up) time in bus clocks for time in ns
+ */
+static int calc_clk (int time, int bus_speed)
+{
+	int clocks;
+
+	clocks = (time*bus_speed+999)/1000 -1;
+
+	if (clocks < 0)
+		clocks = 0;
+
+	if (clocks > 0x0F)
+		clocks = 0x0F;
+
+	return clocks;
+}
+
+/*
+ * compute the values for the clock registers for PIO
+ * mode and pci_clk [MHz] speed
+ *
+ * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
+ *       for mode 3 and 4 drives 8 and 16-bit timings are the same
+ *
+ */ 
+static void compute_clocks (byte pio, pio_clocks_t *p_pclk)
+{
+	int clk1, clk2;
+	int bus_speed;
+
+	bus_speed = ide_system_bus_speed();	/* get speed of PCI bus */
+	/* we don't check against CY82C693's min and max speed,
+	 * so you can play with the idebus=xx parameter
+	 */
+
+	if (pio > CY82C693_MAX_PIO)
+		pio = CY82C693_MAX_PIO;
+
+	/* let's calc the address setup time clocks */
+	p_pclk->address_time = (byte)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
+
+	/* let's calc the active and recovery time clocks */
+	clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed);
+
+	/* calc recovery timing */
+	clk2 =	ide_pio_timings[pio].cycle_time -
+		ide_pio_timings[pio].active_time -
+		ide_pio_timings[pio].setup_time;
+
+	clk2 = calc_clk(clk2, bus_speed);
+
+	clk1 = (clk1<<4)|clk2;	/* combine active and recovery clocks */
+
+	/* note: we use the same values for 16bit IOR and IOW
+         *	those are all the same, since I don't have other
+	 *	timings than those from ide_modes.h
+	 */
+
+	p_pclk->time_16r = (byte)clk1;
+	p_pclk->time_16w = (byte)clk1;
+
+	/* what are good values for 8bit ?? */
+	p_pclk->time_8 = (byte)clk1;
+}
+
+/*
+ * set DMA mode a specific channel for CY82C693
+ */
+static void cy82c693_dma_enable (ide_drive_t *drive, int mode, int single)
+{
+        byte index;
+	byte data;
+
+        if (mode>2)	/* make sure we set a valid mode */
+		mode = 2;
+			   
+	if (mode > drive->id->tDMA)  /* to be absolutly sure we have a valid mode */
+		mode = drive->id->tDMA;
+	
+        index = (HWIF(drive)->channel==0) ? CY82_INDEX_CHANNEL0 : CY82_INDEX_CHANNEL1;
+
+#if CY82C693_DEBUG_LOGS
+       	/* for debug let's show the previous values */
+
+	OUT_BYTE(index, CY82_INDEX_PORT);
+	data = IN_BYTE(CY82_DATA_PORT);
+
+	printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", drive->name, HWIF(drive)->channel, drive->select.b.unit, (data&0x3), ((data>>2)&1));
+#endif /* CY82C693_DEBUG_LOGS */
+
+	data = (byte)mode|(byte)(single<<2);
+
+	OUT_BYTE(index, CY82_INDEX_PORT);
+	OUT_BYTE(data, CY82_DATA_PORT);
+
+#if CY82C693_DEBUG_INFO
+	printk (KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", drive->name, HWIF(drive)->channel, drive->select.b.unit, mode, single);
+#endif /* CY82C693_DEBUG_INFO */
+
+	/* 
+	 * note: below we set the value for Bus Master IDE TimeOut Register
+	 * I'm not absolutly sure what this does, but it solved my problem
+	 * with IDE DMA and sound, so I now can play sound and work with
+	 * my IDE driver at the same time :-)
+	 *
+	 * If you know the correct (best) value for this register please
+	 * let me know - ASK
+	 */
+
+	data = BUSMASTER_TIMEOUT;
+	OUT_BYTE(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
+	OUT_BYTE(data, CY82_DATA_PORT);
+
+#if CY82C693_DEBUG_INFO	
+	printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", drive->name, data);
+#endif /* CY82C693_DEBUG_INFO */
+}
+
+/* 
+ * used to set DMA mode for CY82C693 (single and multi modes)
+ */
+static int cy82c693_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
+{
+	/*
+	 * if the function is dma on, set dma mode for drive everything
+	 * else is done by the defaul func
+	 */
+	if (func == ide_dma_on) {
+		struct hd_driveid *id = drive->id;
+
+#if CY82C693_DEBUG_INFO
+		printk (KERN_INFO "dma_on: %s\n", drive->name);
+#endif /* CY82C693_DEBUG_INFO */
+
+		if (id != NULL) {		
+                       /* Enable DMA on any drive that has DMA (multi or single) enabled */
+                       if (id->field_valid & 2) {       /* regular DMA */
+			       int mmode, smode;
+
+			       mmode = id->dma_mword & (id->dma_mword >> 8);
+			       smode = id->dma_1word & (id->dma_1word >> 8);
+			       		      
+		               if (mmode != 0)
+				     cy82c693_dma_enable(drive, (mmode >> 1), 0); /* enable multi */
+			       else if (smode != 0)
+				     cy82c693_dma_enable(drive, (smode >> 1), 1); /* enable single */
+			}
+		}
+	}
+        return ide_dmaproc(func, drive);
+}
+
+/*
+ * tune ide drive - set PIO mode
+ */
+static void cy82c693_tune_drive (ide_drive_t *drive, byte pio)
+{
+	ide_hwif_t *hwif = HWIF(drive);
+	struct pci_dev *dev = hwif->pci_dev;
+	pio_clocks_t pclk;
+	unsigned int addrCtrl;
+
+	/* select primary or secondary channel */
+	if (hwif->index > 0) {  /* drive is on the secondary channel */
+		dev = pci_find_slot(dev->bus->number, dev->devfn+1);
+		if (!dev) {
+			printk(KERN_ERR "%s: tune_drive: Cannot find secondary interface!\n", drive->name);
+			return;
+		}
+	}
+
+#if CY82C693_DEBUG_LOGS
+	/* for debug let's show the register values */
+	
+       	if (drive->select.b.unit == 0) {
+		/*
+		 * get master drive registers               	
+		 * address setup control register
+		 * is 32 bit !!!
+		 */ 
+	  	pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);                
+		addrCtrl &= 0x0F;
+
+		/* now let's get the remaining registers */
+		pci_read_config_byte(dev, CY82_IDE_MASTER_IOR, &pclk.time_16r);
+		pci_read_config_byte(dev, CY82_IDE_MASTER_IOW, &pclk.time_16w);
+		pci_read_config_byte(dev, CY82_IDE_MASTER_8BIT, &pclk.time_8);
+	} else {
+		/*
+		 * set slave drive registers
+		 * address setup control register
+		 * is 32 bit !!!
+		 */ 
+		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+
+		addrCtrl &= 0xF0;
+		addrCtrl >>= 4;
+
+		/* now let's get the remaining registers */
+		pci_read_config_byte(dev, CY82_IDE_SLAVE_IOR, &pclk.time_16r);
+		pci_read_config_byte(dev, CY82_IDE_SLAVE_IOW, &pclk.time_16w);
+		pci_read_config_byte(dev, CY82_IDE_SLAVE_8BIT, &pclk.time_8);
+	}
+
+	printk (KERN_INFO "%s (ch=%d, dev=%d): PIO timing is (addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", drive->name, hwif->channel, drive->select.b.unit, addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
+#endif /* CY82C693_DEBUG_LOGS */
+
+        /* first let's calc the pio modes */
+	pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL);
+
+#if CY82C693_DEBUG_INFO
+	printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
+#endif /* CY82C693_DEBUG_INFO */
+
+        compute_clocks(pio, &pclk);  /* let's calc the values for this PIO mode */
+
+	/* now let's write  the clocks registers */
+	if (drive->select.b.unit == 0) {
+		/*
+		 * set master drive
+		 * address setup control register
+		 * is 32 bit !!!
+		 */ 
+		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+		
+		addrCtrl &= (~0xF);
+		addrCtrl |= (unsigned int)pclk.address_time;
+		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
+
+		/* now let's set the remaining registers */
+		pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
+		pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
+		pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
+		
+		addrCtrl &= 0xF;
+	} else {
+		/*
+		 * set slave drive
+		 * address setup control register
+		 * is 32 bit !!!
+		 */ 
+		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
+
+		addrCtrl &= (~0xF0);
+		addrCtrl |= ((unsigned int)pclk.address_time<<4);
+		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
+
+		/* now let's set the remaining registers */
+		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
+		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
+		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
+
+		addrCtrl >>= 4;
+		addrCtrl &= 0xF;
+	}	
+
+#if CY82C693_DEBUG_INFO
+	printk (KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to (addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n", drive->name, hwif->channel, drive->select.b.unit, addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
+#endif /* CY82C693_DEBUG_INFO */
+}
+
+/*
+ * this function is called during init and is used to setup the cy82c693 chip
+ */
+/*
+ * FIXME! "pci_init_cy82c693" really should replace
+ * the "init_cy82c693_chip", it is the correct location to tinker/setup
+ * the device prior to INIT.
+ */
+
+unsigned int __init pci_init_cy82c693(struct pci_dev *dev, const char *name)
+{
+#ifdef CY82C693_SETDMA_CLOCK
+        byte data;
+#endif /* CY82C693_SETDMA_CLOCK */ 
+
+	/* write info about this verion of the driver */
+	printk (KERN_INFO CY82_VERSION "\n");
+
+#ifdef CY82C693_SETDMA_CLOCK
+       /* okay let's set the DMA clock speed */
+        
+        OUT_BYTE(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
+        data = IN_BYTE(CY82_DATA_PORT);
+
+#if CY82C693_DEBUG_INFO
+	printk (KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n", name, data);
+#endif /* CY82C693_DEBUG_INFO */
+
+        /*
+	 * for some reason sometimes the DMA controller
+	 * speed is set to ATCLK/2 ???? - we fix this here
+	 * 
+	 * note: i don't know what causes this strange behaviour,
+	 *       but even changing the dma speed doesn't solve it :-(
+	 *       the ide performance is still only half the normal speed 
+	 * 
+	 *       if anybody knows what goes wrong with my machine, please
+	 *       let me know - ASK
+         */
+
+	data |= 0x03;
+
+        OUT_BYTE(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
+        OUT_BYTE(data, CY82_DATA_PORT);
+
+#if CY82C693_DEBUG_INFO
+	printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", name, data);
+#endif /* CY82C693_DEBUG_INFO */
+
+#endif /* CY82C693_SETDMA_CLOCK */
+	return 0;
+}
+
+/*
+ * the init function - called for each ide channel once
+ */
+void __init ide_init_cy82c693(ide_hwif_t *hwif)
+{
+	hwif->chipset = ide_cy82c693;
+	hwif->tuneproc = &cy82c693_tune_drive;
+	if (hwif->dma_base) {
+		hwif->dmaproc = &cy82c693_dmaproc;
+	} else {
+		hwif->drives[0].autotune = 1;
+		hwif->drives[1].autotune = 1;
+	}
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)