patch-2.3.99-pre8 linux/arch/arm/def-configs/brutus

Next file: linux/arch/arm/def-configs/graphicsclient
Previous file: linux/arch/arm/def-configs/assabet
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.99-pre7/linux/arch/arm/def-configs/brutus linux/arch/arm/def-configs/brutus
@@ -18,12 +18,15 @@
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_FOOTBRIDGE is not set
 CONFIG_ARCH_SA1100=y
+# CONFIG_SA1100_ASSABET is not set
 CONFIG_SA1100_BRUTUS=y
 # CONFIG_SA1100_EMPEG is not set
 # CONFIG_SA1100_ITSY is not set
+# CONFIG_SA1100_BITSY is not set
 # CONFIG_SA1100_LART is not set
 # CONFIG_SA1100_PLEB is not set
 # CONFIG_SA1100_THINCLIENT is not set
+# CONFIG_SA1100_GRAPHICSCLIENT is not set
 # CONFIG_SA1100_VICTOR is not set
 # CONFIG_SA1100_TIFON is not set
 CONFIG_DISCONTIGMEM=y
@@ -32,7 +35,11 @@
 # CONFIG_CPU_26 is not set
 CONFIG_CPU_32v4=y
 CONFIG_CPU_SA1100=y
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
 # CONFIG_ISA_DMA is not set
+# CONFIG_SBUS is not set
+# CONFIG_PCMCIA is not set
 # CONFIG_ALIGNMENT_TRAP is not set
 
 #
@@ -62,12 +69,14 @@
 #
 # CONFIG_PARPORT is not set
 CONFIG_CMDLINE=""
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
 
 #
 # I2O device support
 #
 # CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
 # CONFIG_I2O_BLOCK is not set
 # CONFIG_I2O_SCSI is not set
 # CONFIG_I2O_PROC is not set
@@ -82,24 +91,23 @@
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_IDE is not set
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
 
 #
 # Additional Block Devices
 #
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_LVM is not set
 # CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_STRIPED is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_FLASH is not set
 
 #
 # Character devices
@@ -155,11 +163,6 @@
 # CONFIG_AGP is not set
 
 #
-# USB support
-#
-# CONFIG_USB is not set
-
-#
 # Console drivers
 #
 # CONFIG_VGA_CONSOLE is not set
@@ -171,10 +174,6 @@
 CONFIG_FB=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FB_SA1100=y
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_3DFX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FBCON_ADVANCED is not set
 CONFIG_FBCON_CFB2=y
@@ -189,6 +188,13 @@
 # CONFIG_FONT_ACORN_8x8 is not set
 
 #
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_IDE_MODES is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
 # SCSI support
 #
 # CONFIG_SCSI is not set
@@ -200,6 +206,7 @@
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_BFS_FS is not set
@@ -232,6 +239,11 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
 
 #
 # Kernel hacking

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)