patch-2.3.99-pre9 linux/include/asm-mips64/sn/intr.h

• Lines: 123
• Date: Mon May 15 12:55:26 2000
• Orig file: v2.3.99-pre8/linux/include/asm-mips64/sn/intr.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.99-pre8/linux/include/asm-mips64/sn/intr.h linux/include/asm-mips64/sn/intr.h
@@ -0,0 +1,122 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_INTR_H
+#define __ASM_SN_INTR_H
+
+/* Number of interrupt levels associated with each interrupt register. */
+#define N_INTPEND_BITS		64
+
+#define INT_PEND0_BASELVL	0
+#define INT_PEND1_BASELVL	64
+
+#define	N_INTPENDJUNK_BITS	8
+#define	INTPENDJUNK_CLRBIT	0x80
+
+#include <asm/sn/intr_public.h>
+
+#if _LANGUAGE_C
+
+/*
+ * Macros to manipulate the interrupt register on the calling hub chip.
+ */
+
+#define LOCAL_HUB_SEND_INTR(_level)	LOCAL_HUB_S(PI_INT_PEND_MOD, \
+						    (0x100|(_level)))
+#define REMOTE_HUB_SEND_INTR(_hub, _level) \
+		REMOTE_HUB_S((_hub), PI_INT_PEND_MOD, (0x100|(_level)))
+
+/*
+ * When clearing the interrupt, make sure this clear does make it 
+ * to the hub. Otherwise we could end up losing interrupts.
+ * We do an uncached load of the int_pend0 register to ensure this.
+ */
+
+#define LOCAL_HUB_CLR_INTR(_level)	  \
+                LOCAL_HUB_S(PI_INT_PEND_MOD, (_level)),	\
+                LOCAL_HUB_L(PI_INT_PEND0)
+#define REMOTE_HUB_CLR_INTR(_hub, _level) \
+		REMOTE_HUB_S((_hub), PI_INT_PEND_MOD, (_level)),	\
+                REMOTE_HUB_L((_hub), PI_INT_PEND0)
+
+#else /* LANGUAGE_ASSEMBLY */
+
+#endif /* LANGUAGE_C */
+
+/*
+ * Hard-coded interrupt levels:
+ */
+
+/*
+ *	L0 = SW1
+ *	L1 = SW2
+ *	L2 = INT_PEND0
+ *	L3 = INT_PEND1
+ *	L4 = RTC
+ *	L5 = Profiling Timer
+ *	L6 = Hub Errors
+ *	L7 = Count/Compare (T5 counters)
+ */
+
+
+/* INT_PEND0 hard-coded bits. */
+#ifdef SABLE
+#define SDISK_INTR	63
+#endif
+#ifdef DEBUG_INTR_TSTAMP
+/* hard coded interrupt level for interrupt latency test interrupt */
+#define	CPU_INTRLAT_B	62
+#define	CPU_INTRLAT_A	61
+#endif
+
+/* Hardcoded bits required by software. */
+#define MSC_MESG_INTR	13
+#define CPU_ACTION_B	11
+#define CPU_ACTION_A	10
+
+/* These are determined by hardware: */
+#define CC_PEND_B	6
+#define CC_PEND_A	5
+#define UART_INTR	4
+#define PG_MIG_INTR	3
+#define GFX_INTR_B	2
+#define GFX_INTR_A	1
+#define RESERVED_INTR	0
+
+/* INT_PEND1 hard-coded bits: */
+#define MSC_PANIC_INTR	63
+#define NI_ERROR_INTR	62
+#define MD_COR_ERR_INTR	61
+#define COR_ERR_INTR_B	60
+#define COR_ERR_INTR_A	59
+#define CLK_ERR_INTR	58
+#define IO_ERROR_INTR	57	/* set up by prom */
+
+#define	DEBUG_INTR_B	55	/* used by symmon to stop all cpus */
+#define	DEBUG_INTR_A	54
+
+#define BRIDGE_ERROR_INTR 53	/* Setup by PROM to catch Bridge Errors */
+
+#define IP27_INTR_0	52	/* Reserved for PROM use */
+#define IP27_INTR_1	51	/*   (do not use in Kernel) */
+#define IP27_INTR_2	50
+#define IP27_INTR_3	49
+#define IP27_INTR_4	48
+#define IP27_INTR_5	47
+#define IP27_INTR_6	46
+#define IP27_INTR_7	45
+
+#define	TLB_INTR_B	44	/* used for tlb flush random */
+#define	TLB_INTR_A	43
+
+#define LLP_PFAIL_INTR_B 42	/* see ml/SN/SN0/sysctlr.c */
+#define LLP_PFAIL_INTR_A 41
+
+#define NI_BRDCAST_ERR_B 40
+#define NI_BRDCAST_ERR_A 39
+
+#endif /* __ASM_SN_INTR_H */