patch-2.4.10 linux/arch/mips64/mips-boards/generic/gdb_hook.c

• Lines: 203
• Date: Sun Sep 9 10:43:02 2001
• Orig file: v2.4.9/linux/arch/mips64/mips-boards/generic/gdb_hook.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.9/linux/arch/mips64/mips-boards/generic/gdb_hook.c linux/arch/mips64/mips-boards/generic/gdb_hook.c
@@ -0,0 +1,202 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * This is the interface to the remote debugger stub.
+ *
+ */
+
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+
+static struct serial_state rs_table[RS_TABLE_SIZE] = {
+	SERIAL_PORT_DFNS	/* Defined in serial.h */
+};
+
+static struct async_struct kdb_port_info = {0};
+
+
+static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
+{
+	return inb(info->port + offset);
+}
+
+static __inline__ void serial_out(struct async_struct *info, int offset,
+				int value)
+{
+	outb(value, info->port+offset);
+}
+
+void rs_kgdb_hook(int tty_no) {
+	int t;
+	struct serial_state *ser = &rs_table[tty_no];
+
+	kdb_port_info.state = ser;
+	kdb_port_info.magic = SERIAL_MAGIC;
+	kdb_port_info.port = ser->port;
+	kdb_port_info.flags = ser->flags;
+
+	/*
+	 * Clear all interrupts
+	 */
+	serial_in(&kdb_port_info, UART_LSR);
+	serial_in(&kdb_port_info, UART_RX);
+	serial_in(&kdb_port_info, UART_IIR);
+	serial_in(&kdb_port_info, UART_MSR);
+
+	/*
+	 * Now, initialize the UART 
+	 */
+	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
+	if (kdb_port_info.flags & ASYNC_FOURPORT) {
+		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
+		t = UART_MCR_DTR | UART_MCR_OUT1;
+	} else {
+		kdb_port_info.MCR 
+			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
+		t = UART_MCR_DTR | UART_MCR_RTS;
+	}
+
+	kdb_port_info.MCR = t;		/* no interrupts, please */
+	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
+	
+	/*
+	 * and set the speed of the serial port
+	 * (currently hardwired to 9600 8N1
+	 */
+
+	/* baud rate is fixed to 9600 (is this sufficient?)*/
+	t = kdb_port_info.state->baud_base / 9600;	
+	/* set DLAB */
+	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
+	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
+	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
+	/* reset DLAB */
+	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
+}
+
+int rs_putDebugChar(char c)
+{
+
+	if (!kdb_port_info.state) { 	/* need to init device first */
+		return 0;
+	}
+
+	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(&kdb_port_info, UART_TX, c);
+
+	return 1;
+}
+
+char rs_getDebugChar(void)
+{
+	if (!kdb_port_info.state) { 	/* need to init device first */
+		return 0;
+	}
+
+	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
+		;
+
+	return(serial_in(&kdb_port_info, UART_RX));
+}
+
+
+#ifdef CONFIG_MIPS_ATLAS
+
+#include <asm/mips-boards/atlas.h>
+#include <asm/mips-boards/saa9730_uart.h>
+
+#define INB(a)     inb((unsigned long)a)
+#define OUTB(x,a)  outb(x,(unsigned long)a)
+
+/*
+ * This is the interface to the remote debugger stub
+ * if the Philips part is used for the debug port,
+ * called from the platform setup code.
+ *
+ * PCI init will not have been done yet, we make a
+ * universal assumption about the way the bootloader (YAMON)
+ * have located and set up the chip.
+ */
+static t_uart_saa9730_regmap *kgdb_uart = (void *)(ATLAS_SAA9730_REG + SAA9730_UART_REGS_ADDR);
+
+static int saa9730_kgdb_active = 0;
+
+void saa9730_kgdb_hook(void) 
+{
+        volatile unsigned char t;
+
+        /*
+         * Clear all interrupts
+         */
+	t = INB(&kgdb_uart->Lsr);
+	t += INB(&kgdb_uart->Msr);
+	t += INB(&kgdb_uart->Thr_Rbr);
+	t += INB(&kgdb_uart->Iir_Fcr);
+
+        /*
+         * Now, initialize the UART
+         */
+	/* 8 data bits, one stop bit, no parity */
+	OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr);
+
+        /* baud rate is fixed to 9600 (is this sufficient?)*/
+	OUTB(0, &kgdb_uart->BaudDivMsb); /* HACK - Assumes standard crystal */
+	OUTB(23, &kgdb_uart->BaudDivLsb); /* HACK - known for MIPS Atlas */
+
+	/* Set RTS/DTR active */
+	OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr);
+	saa9730_kgdb_active = 1;
+}
+
+int saa9730_putDebugChar(char c)
+{
+
+        if (!saa9730_kgdb_active) {     /* need to init device first */
+                return 0;
+        }
+
+        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE))
+                ;
+	OUTB(c, &kgdb_uart->Thr_Rbr);
+
+        return 1;
+}
+
+char saa9730_getDebugChar(void)
+{
+	char c;
+
+        if (!saa9730_kgdb_active) {     /* need to init device first */
+                return 0;
+        }
+        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR))
+                ;
+
+	c = INB(&kgdb_uart->Thr_Rbr);
+        return(c);
+}
+
+#endif