patch-2.4.10 linux/arch/mips/ddb5xxx/common/nile4.c

• Lines: 136
• Date: Sun Sep 9 10:43:01 2001
• Orig file: v2.4.9/linux/arch/mips/ddb5xxx/common/nile4.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.9/linux/arch/mips/ddb5xxx/common/nile4.c linux/arch/mips/ddb5xxx/common/nile4.c
@@ -0,0 +1,135 @@
+/***********************************************************************
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/common/nile4.c
+ *     misc low-level routines for vrc-5xxx controllers.
+ *
+ * derived from original code by Geert Uytterhoeven <geert@sonycom.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ ***********************************************************************
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+#include <asm/ddb5xxx/debug.h>
+
+u32
+ddb_calc_pdar(u32 phys, u32 size, int width, 
+	      int on_memory_bus, int pci_visible)
+{
+        u32 maskbits;
+        u32 widthbits;
+
+        switch (size) {
+#if 0                           /* We don't support 4 GB yet */
+        case 0x100000000:       /* 4 GB */
+                maskbits = 4;
+                break;
+#endif
+        case 0x80000000:        /* 2 GB */
+                maskbits = 5;
+                break;
+        case 0x40000000:        /* 1 GB */
+                maskbits = 6;
+                break;
+        case 0x20000000:        /* 512 MB */
+                maskbits = 7;
+                break;
+        case 0x10000000:        /* 256 MB */
+                maskbits = 8;
+                break;
+        case 0x08000000:        /* 128 MB */
+                maskbits = 9;
+                break;
+        case 0x04000000:        /* 64 MB */
+                maskbits = 10;
+                break;
+        case 0x02000000:        /* 32 MB */
+                maskbits = 11;
+                break;
+        case 0x01000000:        /* 16 MB */
+                maskbits = 12;
+                break;
+        case 0x00800000:        /* 8 MB */
+                maskbits = 13;
+                break;
+        case 0x00400000:        /* 4 MB */
+                maskbits = 14;
+                break;
+        case 0x00200000:        /* 2 MB */
+                maskbits = 15;
+                break;
+        case 0:         /* OFF */
+                maskbits = 0;
+                break;
+        default:
+                panic("nile4_set_pdar: unsupported size %p\n", (void *) size);
+        }
+        switch (width) {
+        case 8:
+                widthbits = 0;
+                break;
+        case 16:
+                widthbits = 1;
+                break;
+        case 32:
+                widthbits = 2;
+                break;
+        case 64:
+                widthbits = 3;
+                break;
+        default:
+                panic("nile4_set_pdar: unsupported width %d\n", width);
+        }
+
+	return maskbits | (on_memory_bus ? 0x10 : 0) |
+		(pci_visible ? 0x20 : 0) | (widthbits << 6) |
+		(phys & 0xffe00000);
+}
+
+void
+ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+	     int on_memory_bus, int pci_visible)
+{
+	u32 temp= ddb_calc_pdar(phys, size, width, on_memory_bus, pci_visible);
+	ddb_out32(pdar, temp);
+	ddb_out32(pdar + 4, 0);
+
+        /*
+         * When programming a PDAR, the register should be read immediately
+         * after writing it. This ensures that address decoders are properly
+         * configured.
+	 * [jsun] is this really necesary?
+         */
+        ddb_in32(pdar);
+        ddb_in32(pdar + 4);
+}
+
+/*
+ * routines that mess with PCIINITx registers
+ */
+
+void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options)
+{
+        switch (type) {
+        case DDB_PCICMD_IACK: /* PCI Interrupt Acknowledge */
+        case DDB_PCICMD_IO:   /* PCI I/O Space */
+        case DDB_PCICMD_MEM:  /* PCI Memory Space */
+        case DDB_PCICMD_CFG:  /* PCI Configuration Space */
+                break;
+        default:
+                panic("nile4_set_pmr: invalid type %d\n", type);
+        }
+        ddb_out32(pmr, (type << 1) | (addr & 0xffe00000) | options );
+        ddb_out32(pmr + 4, 0);
+}