patch-2.4.10 linux/drivers/tc/lk201.h

• Lines: 55
• Date: Mon Aug 27 08:56:31 2001
• Orig file: v2.4.9/linux/drivers/tc/lk201.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.9/linux/drivers/tc/lk201.h linux/drivers/tc/lk201.h
@@ -0,0 +1,53 @@
+/*
+ *	Commands to the keyboard processor
+ */
+
+#define	LK_PARAM		0x80	/* start/end parameter list */
+
+#define	LK_CMD_RESUME		0x8b
+#define	LK_CMD_INHIBIT		0xb9
+#define	LK_CMD_LEDS_ON		0x13	/* 1 param: led bitmask */
+#define	LK_CMD_LEDS_OFF		0x11	/* 1 param: led bitmask */
+#define	LK_CMD_DIS_KEYCLK	0x99
+#define	LK_CMD_ENB_KEYCLK	0x1b	/* 1 param: volume */
+#define	LK_CMD_DIS_CTLCLK	0xb9
+#define	LK_CMD_ENB_CTLCLK	0xbb
+#define	LK_CMD_SOUND_CLK	0x9f
+#define	LK_CMD_DIS_BELL		0xa1
+#define	LK_CMD_ENB_BELL		0x23	/* 1 param: volume */
+#define	LK_CMD_BELL		0xa7
+#define	LK_CMD_TMP_NORPT	0xc1
+#define	LK_CMD_ENB_RPT		0xe3
+#define	LK_CMD_DIS_RPT		0xe1
+#define	LK_CMD_RPT_TO_DOWN	0xd9
+#define	LK_CMD_REQ_ID		0xab
+#define	LK_CMD_POWER_UP		0xfd
+#define	LK_CMD_TEST_MODE	0xcb
+#define	LK_CMD_SET_DEFAULTS	0xd3
+
+/* there are 4 leds, represent them in the low 4 bits of a byte */
+#define	LK_PARAM_LED_MASK(ledbmap)	(LK_PARAM|(ledbmap))
+
+/* max volume is 0, lowest is 0x7 */
+#define	LK_PARAM_VOLUME(v)		(LK_PARAM|((v)&0x7))
+
+/* mode set command(s) details */
+#define	LK_MODE_DOWN		0x0
+#define	LK_MODE_RPT_DOWN	0x2
+#define	LK_MODE_DOWN_UP		0x6
+#define	LK_CMD_MODE(m,div)	(LK_PARAM|(div<<3)|m)
+
+#define LK_SHIFT 1<<0
+#define LK_CTRL 1<<1
+#define LK_LOCK 1<<2
+#define LK_COMP 1<<3
+
+#define LK_KEY_SHIFT 174
+#define LK_KEY_CTRL 175
+#define LK_KEY_LOCK 176
+#define LK_KEY_COMP 177
+#define LK_KEY_RELEASE 179
+#define LK_KEY_REPEAT 180
+#define LK_KEY_ACK 186
+
+extern unsigned char scancodeRemap[256];
\ No newline at end of file