patch-2.4.11-dontuse linux/drivers/usb/serial/ir-usb.c

• Lines: 447
• Date: Tue Oct 9 15:15:02 2001
• Orig file: v2.4.10/linux/drivers/usb/serial/ir-usb.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.10/linux/drivers/usb/serial/ir-usb.c linux/drivers/usb/serial/ir-usb.c
@@ -0,0 +1,446 @@
+/*
+ * USB IR Dongle driver
+ *
+ *	Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ * This driver allows a USB IrDA device to be used as a "dumb" serial device.
+ * This can be useful if you do not have access to a full IrDA stack on the
+ * other side of the connection.  If you do have an IrDA stack on both devices,
+ * please use the usb-irda driver, as it contains the proper error checking and
+ * other goodness of a full IrDA stack.
+ *
+ * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * 
+ * 2001_Oct_07	greg kh
+ *	initial version released.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <net/irda/irda-usb.h>
+
+#ifdef CONFIG_USB_SERIAL_DEBUG
+	static int debug = 1;
+#else
+	static int debug;
+#endif
+
+#include "usb-serial.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
+#define DRIVER_DESC "USB IR Dongle driver"
+
+static int  ir_startup (struct usb_serial *serial);
+static int  ir_open (struct usb_serial_port *port, struct file *filep);
+static void ir_close (struct usb_serial_port *port, struct file *filep);
+static int  ir_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count);
+static void ir_write_bulk_callback (struct urb *urb);
+static void ir_read_bulk_callback (struct urb *urb);
+static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+
+
+static __devinitdata struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x09c4, 0x0011) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, id_table);
+
+
+struct usb_serial_device_type ir_device = {
+	name:			"IR Dongle",
+	id_table:		id_table,
+	needs_interrupt_in:	MUST_HAVE,
+	needs_bulk_in:		MUST_HAVE,
+	needs_bulk_out:		MUST_HAVE,
+	num_interrupt_in:	1,
+	num_bulk_in:		1,
+	num_bulk_out:		1,
+	num_ports:		1,
+	set_termios:		ir_set_termios,
+	startup:		ir_startup,
+	open:			ir_open,
+	close:			ir_close,
+	write:			ir_write,
+	write_bulk_callback:	ir_write_bulk_callback,
+	read_bulk_callback:	ir_read_bulk_callback,
+};
+
+static inline void irda_usb_dump_class_desc(struct irda_class_desc *desc)
+{
+	dbg("bLength=%x", desc->bLength);
+	dbg("bDescriptorType=%x", desc->bDescriptorType);
+	dbg("bcdSpecRevision=%x", desc->bcdSpecRevision); 
+	dbg("bmDataSize=%x", desc->bmDataSize);
+	dbg("bmWindowSize=%x", desc->bmWindowSize);
+	dbg("bmMinTurnaroundTime=%d", desc->bmMinTurnaroundTime);
+	dbg("wBaudRate=%x", desc->wBaudRate);
+	dbg("bmAdditionalBOFs=%x", desc->bmAdditionalBOFs);
+	dbg("bIrdaRateSniff=%x", desc->bIrdaRateSniff);
+	dbg("bMaxUnicastList=%x", desc->bMaxUnicastList);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_find_class_desc(dev, ifnum)
+ *
+ *    Returns instance of IrDA class descriptor, or NULL if not found
+ *
+ * The class descriptor is some extra info that IrDA USB devices will
+ * offer to us, describing their IrDA characteristics. We will use that in
+ * irda_usb_init_qos()
+ */
+static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum)
+{
+	struct usb_interface_descriptor *interface;
+	struct irda_class_desc *desc;
+	struct irda_class_desc *ptr;
+	int ret;
+		
+	desc = kmalloc(sizeof (struct irda_class_desc), GFP_KERNEL);
+	if (desc == NULL) 
+		return NULL;
+	memset(desc, 0, sizeof(struct irda_class_desc));
+	
+	ret = usb_get_class_descriptor(dev, ifnum, USB_DT_IRDA, 0, (void *) desc, sizeof(struct irda_class_desc));
+	dbg(__FUNCTION__ " -  ret=%d", ret);
+	if (ret)
+		dbg(__FUNCTION__ " - usb_get_class_descriptor failed (0x%x)", ret);
+
+	/* Check if we found it? */
+	if (desc->bDescriptorType == USB_DT_IRDA)
+		goto exit;
+
+	dbg(__FUNCTION__ " - parsing extra descriptors...");
+	
+	/* Check if the class descriptor is interleaved with standard descriptors */
+	interface = &dev->actconfig->interface[ifnum].altsetting[0];
+	ret = usb_get_extra_descriptor(interface, USB_DT_IRDA, &ptr);
+	if (ret) {
+		kfree(desc);
+		return NULL;
+	}
+	*desc = *ptr;
+exit:
+	irda_usb_dump_class_desc(desc);
+	return desc;
+}
+
+static int ir_startup (struct usb_serial *serial)
+{
+	struct irda_class_desc *irda_desc;
+
+	irda_desc = irda_usb_find_class_desc (serial->dev, 0);
+	if (irda_desc == NULL) {
+		err ("IRDA class descriptor not found, device not bound");
+		return -ENODEV;
+	}
+	dbg (__FUNCTION__" - Baud rates supported: %s%s%s%s%s%s%s%s%s",
+	     (irda_desc->wBaudRate & 0x0001) ? "2400 " : "",
+	     irda_desc->wBaudRate & 0x0002 ? "9600 " : "",
+	     irda_desc->wBaudRate & 0x0004 ? "19200 " : "",
+	     irda_desc->wBaudRate & 0x0008 ? "38400 " : "",
+	     irda_desc->wBaudRate & 0x0010 ? "57600 " : "",
+	     irda_desc->wBaudRate & 0x0020 ? "115200 " : "",
+	     irda_desc->wBaudRate & 0x0040 ? "576000 " : "",
+	     irda_desc->wBaudRate & 0x0080 ? "1152000 " : "",
+	     irda_desc->wBaudRate & 0x0100 ? "4000000 " : "");
+
+	kfree (irda_desc);
+
+	return 0;		
+}
+
+static int ir_open (struct usb_serial_port *port, struct file *filp)
+{
+	struct usb_serial *serial = port->serial;
+	int result = 0;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return -ENODEV;
+	
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	down (&port->sem);
+	
+	++port->open_count;
+	MOD_INC_USE_COUNT;
+	
+	if (!port->active) {
+		port->active = 1;
+
+		/* force low_latency on so that our tty_push actually forces the data through, 
+		   otherwise it is scheduled, and with high data rates (like with OHCI) data
+		   can get lost. */
+		port->tty->low_latency = 1;
+		
+		/* Start reading from the device */
+		FILL_BULK_URB(port->read_urb, serial->dev, 
+			      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+			      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
+			      ir_read_bulk_callback, port);
+		result = usb_submit_urb(port->read_urb);
+		if (result)
+			err(__FUNCTION__ " - failed submitting read urb, error %d", result);
+	}
+	
+	up (&port->sem);
+	
+	return result;
+}
+
+static void ir_close (struct usb_serial_port *port, struct file * filp)
+{
+	struct usb_serial *serial;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return;
+	
+	dbg(__FUNCTION__ " - port %d", port->number);
+			 
+	serial = get_usb_serial (port, __FUNCTION__);
+	if (!serial)
+		return;
+	
+	down (&port->sem);
+
+	--port->open_count;
+
+	if (port->open_count <= 0) {
+		/* shutdown our bulk read */
+		usb_unlink_urb (port->read_urb);
+		port->active = 0;
+		port->open_count = 0;
+
+	}
+	up (&port->sem);
+	MOD_DEC_USE_COUNT;
+}
+
+static int ir_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count)
+{
+	unsigned char *transfer_buffer;
+	int result;
+
+	dbg(__FUNCTION__ " - port = %d, count = %d", port->number, count);
+
+	if (!port->tty) {
+		err (__FUNCTION__ " - no tty???");
+		return 0;
+	}
+
+	if (count == 0)
+		return 0;
+
+	if (port->write_urb->status == -EINPROGRESS) {
+		dbg (__FUNCTION__ " - already writing");
+		return 0;
+	}
+
+	/*
+	 * The first byte of the packet we send to the device contains a BOD
+	 * and baud rate change.  So we set it to 0.
+	 * See section 5.4.2.2 of the USB IrDA spec.
+	 */
+	transfer_buffer = port->write_urb->transfer_buffer;
+	count = min (port->bulk_out_size-1, count);
+	if (from_user) {
+		if (copy_from_user (&transfer_buffer[1], buf, count))
+			return -EFAULT;
+	} else {
+		memcpy (&transfer_buffer[1], buf, count);
+	}
+
+	transfer_buffer[0] = 0x00;
+
+	usb_serial_debug_data (__FILE__, __FUNCTION__, count+1, transfer_buffer);
+
+	port->write_urb->transfer_buffer_length = count + 1;
+	port->write_urb->dev = port->serial->dev;
+	result = usb_submit_urb (port->write_urb);
+	if (result)
+		err(__FUNCTION__ " - failed submitting write urb, error %d", result);
+	else
+		result = count;
+
+	return result;
+}
+
+static void ir_write_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return;
+	
+	dbg(__FUNCTION__ " - port %d", port->number);
+	
+	if (urb->status) {
+		dbg(__FUNCTION__ " - nonzero write bulk status received: %d", urb->status);
+		return;
+	}
+
+	queue_task(&port->tqueue, &tq_immediate);
+	mark_bh(IMMEDIATE_BH);
+	
+	return;
+}
+
+static void ir_read_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int i;
+	int result;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	if (!serial) {
+		dbg(__FUNCTION__ " - bad serial pointer, exiting");
+		return;
+	}
+
+	if (urb->status) {
+		dbg(__FUNCTION__ " - nonzero read bulk status received: %d", urb->status);
+		return;
+	}
+
+	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
+
+	tty = port->tty;
+	if (urb->actual_length > 1) {
+		for (i = 1; i < urb->actual_length ; ++i) {
+			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
+			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				tty_flip_buffer_push(tty);
+			}
+			/* this doesn't actually push the data through unless tty->low_latency is set */
+			tty_insert_flip_char(tty, data[i], 0);
+		}
+		tty_flip_buffer_push(tty);
+	}
+
+	/* Continue trying to always read  */
+	FILL_BULK_URB(port->read_urb, serial->dev, 
+		      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
+		      ir_read_bulk_callback, port);
+	result = usb_submit_urb(port->read_urb);
+	if (result)
+		err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
+	return;
+}
+
+static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+{
+	unsigned char *transfer_buffer;
+	unsigned int cflag;
+	int result;
+	u8 baud;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	if ((!port->tty) || (!port->tty->termios)) {
+		dbg(__FUNCTION__" - no tty structures");
+		return;
+	}
+
+	cflag = port->tty->termios->c_cflag;
+	/* check that they really want us to change something */
+	if (old_termios) {
+		if ((cflag == old_termios->c_cflag) &&
+		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
+			dbg(__FUNCTION__ " - nothing to change...");
+			return;
+		}
+	}
+
+	/* All we can change is the baud rate */
+	if (cflag & CBAUD) {
+		dbg (__FUNCTION__ " - asking for baud %d", tty_get_baud_rate(port->tty));
+		/* 
+		 * FIXME, we should compare the baud request against the
+		 * capability stated in the IR header that we got in the
+		 * startup funtion.
+		 */
+		switch (cflag & CBAUD) {
+			case B2400:	baud = SPEED_2400;	break;
+			case B9600:	baud = SPEED_9600;	break;
+			case B19200:	baud = SPEED_19200;	break;
+			case B38400:	baud = SPEED_38400;	break;
+			case B57600:	baud = SPEED_57600;	break;
+			case B115200:	baud = SPEED_115200;	break;
+			case B576000:	baud = SPEED_576000;	break;
+			case B1152000:	baud = SPEED_1152000;	break;
+			case B4000000:	baud = SPEED_4000000;	break;
+			default:
+				err ("ir-usb driver does not support the baudrate (%d) requested", tty_get_baud_rate(port->tty));
+				return;
+		}
+		
+		/* FIXME need to check to see if our write urb is busy right
+		 * now, or use a urb pool. */
+		/* send the baud change out on an "empty" data packet */
+		transfer_buffer = port->write_urb->transfer_buffer;
+		transfer_buffer[0] = baud;
+		port->write_urb->transfer_buffer_length = 1;
+		port->write_urb->dev = port->serial->dev;
+		result = usb_submit_urb (port->write_urb);
+		if (result)
+			err(__FUNCTION__ " - failed submitting write urb, error %d", result);
+	}
+	return;
+}
+
+
+static int __init ir_init (void)
+{
+	usb_serial_register (&ir_device);
+	info(DRIVER_DESC " " DRIVER_VERSION);
+	return 0;
+}
+
+
+static void __exit ir_exit (void)
+{
+	usb_serial_deregister (&ir_device);
+}
+
+
+module_init(ir_init);
+module_exit(ir_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(debug, "i");
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+