patch-2.4.2 linux/arch/s390x/kernel/setup.c

Next file: linux/arch/s390x/kernel/signal.c
Previous file: linux/arch/s390x/kernel/semaphore.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.1/linux/arch/s390x/kernel/setup.c linux/arch/s390x/kernel/setup.c
@@ -0,0 +1,380 @@
+/*
+ *  arch/s390/kernel/setup.c
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "arch/i386/kernel/setup.c"
+ *    Copyright (C) 1995, Linus Torvalds
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/malloc.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#ifdef CONFIG_BLK_DEV_RAM
+#include <linux/blk.h>
+#endif
+#include <linux/bootmem.h>
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/smp.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Machine setup..
+ */
+__u16 boot_cpu_addr;
+int cpus_initialized = 0;
+unsigned long cpu_initialized = 0;
+volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
+
+/*
+ * Setup options
+ */
+
+#ifdef CONFIG_BLK_DEV_RAM
+extern int rd_doload;                  /* 1 = load ramdisk, 0 = don't load */
+extern int rd_prompt;           /* 1 = prompt for ramdisk, 0 = don't prompt*/
+extern int rd_image_start;             /* starting block # of image        */
+#endif
+
+extern int root_mountflags;
+extern int _text,_etext, _edata, _end;
+
+
+/*
+ * This is set up by the setup-routine at boot-time
+ * for S390 need to find out, what we have to setup
+ * using address 0x10400 ...
+ */
+
+#include <asm/setup.h>
+
+static char command_line[COMMAND_LINE_SIZE] = { 0, };
+       char saved_command_line[COMMAND_LINE_SIZE];
+
+static struct resource code_resource = { "Kernel code", 0x100000, 0 };
+static struct resource data_resource = { "Kernel data", 0, 0 };
+
+/*
+ * cpu_init() initializes state that is per-CPU.
+ */
+void __init cpu_init (void)
+{
+        int nr = smp_processor_id();
+        int addr = hard_smp_processor_id();
+
+        if (test_and_set_bit(nr,&cpu_initialized)) {
+                printk("CPU#%d ALREADY INITIALIZED!!!!!!!!!\n", nr);
+                for (;;) __sti();
+        }
+        cpus_initialized++;
+
+        /*
+         * Store processor id in lowcore (used e.g. in timer_interrupt)
+         */
+        asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id));
+        S390_lowcore.cpu_data.cpu_addr = addr;
+        S390_lowcore.cpu_data.cpu_nr = nr;
+
+        /*
+         * Force FPU initialization:
+         */
+        current->flags &= ~PF_USEDFPU;
+        current->used_math = 0;
+
+        /* Setup active_mm for idle_task  */
+        atomic_inc(&init_mm.mm_count);
+        current->active_mm = &init_mm;
+        if (current->mm)
+                BUG();
+        enter_lazy_tlb(&init_mm, current, nr);
+}
+
+/*
+ * VM halt and poweroff setup routines
+ */
+char vmhalt_cmd[128] = "";
+char vmpoff_cmd[128] = "";
+
+static inline void strncpy_skip_quote(char *dst, char *src, int n)
+{
+        int sx, dx;
+
+        dx = 0;
+        for (sx = 0; src[sx] != 0; sx++) {
+                if (src[sx] == '"') continue;
+                dst[dx++] = src[sx];
+                if (dx >= n) break;
+        }
+}
+
+static int __init vmhalt_setup(char *str)
+{
+        strncpy_skip_quote(vmhalt_cmd, str, 127);
+        vmhalt_cmd[127] = 0;
+        return 1;
+}
+
+__setup("vmhalt=", vmhalt_setup);
+
+static int __init vmpoff_setup(char *str)
+{
+        strncpy_skip_quote(vmpoff_cmd, str, 127);
+        vmpoff_cmd[127] = 0;
+        return 1;
+}
+
+__setup("vmpoff=", vmpoff_setup);
+
+/*
+ * Reboot, halt and power_off routines for non SMP.
+ */
+#ifndef CONFIG_SMP
+void machine_restart(char * __unused)
+{
+	reipl(S390_lowcore.ipl_device);
+}
+
+void machine_halt(void)
+{
+        if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0)
+                cpcmd(vmhalt_cmd, NULL, 0);
+        signal_processor(smp_processor_id(), sigp_stop_and_store_status);
+}
+
+void machine_power_off(void)
+{
+        if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0)
+                cpcmd(vmpoff_cmd, NULL, 0);
+        signal_processor(smp_processor_id(), sigp_stop_and_store_status);
+}
+#endif
+
+/*
+ * Setup function called from init/main.c just after the banner
+ * was printed.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+        unsigned long bootmap_size;
+        unsigned long memory_start, memory_end;
+        char c = ' ', cn, *to = command_line, *from = COMMAND_LINE;
+	struct resource *res;
+	unsigned long start_pfn, end_pfn;
+        static unsigned int smptrap=0;
+        unsigned long delay = 0;
+        int len = 0;
+
+        if (smptrap)
+                return;
+        smptrap=1;
+
+        printk("Command line is: %s\n", COMMAND_LINE);
+
+        /*
+         * Setup lowcore information for boot cpu
+         */
+        cpu_init();
+        boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr;
+        __cpu_logical_map[0] = boot_cpu_addr;
+
+        /*
+         * print what head.S has found out about the machine 
+         */
+	printk((MACHINE_IS_VM) ?
+	       "We are running under VM\n" :
+	       "We are running native\n");
+
+        ROOT_DEV = to_kdev_t(ORIG_ROOT_DEV);
+#ifdef CONFIG_BLK_DEV_RAM
+        rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+        rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+        rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+	/* nasty stuff with PARMAREAs. we use head.S or parameterline
+	  if (!MOUNT_ROOT_RDONLY)
+	  root_mountflags &= ~MS_RDONLY;
+	*/
+        memory_start = (unsigned long) &_end;    /* fixit if use $CODELO etc*/
+	memory_end = MEMORY_SIZE;                /* detected in head.s */
+        init_mm.start_code = PAGE_OFFSET;
+        init_mm.end_code = (unsigned long) &_etext;
+        init_mm.end_data = (unsigned long) &_edata;
+        init_mm.brk = (unsigned long) &_end;
+
+	code_resource.start = (unsigned long) &_text;
+	code_resource.end = (unsigned long) &_etext - 1;
+	data_resource.start = (unsigned long) &_etext;
+	data_resource.end = (unsigned long) &_edata - 1;
+
+        /* Save unparsed command line copy for /proc/cmdline */
+        memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+        saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+        for (;;) {
+                /*
+                 * "mem=XXX[kKmM]" sets memsize 
+                 */
+                if (c == ' ' && strncmp(from, "mem=", 4) == 0) {
+                        if (to != command_line) to--;
+                        memory_end = simple_strtoul(from+4, &from, 0);
+                        if ( *from == 'K' || *from == 'k' ) {
+                                memory_end = memory_end << 10;
+                                from++;
+                        } else if ( *from == 'M' || *from == 'm' ) {
+                                memory_end = memory_end << 20;
+                                from++;
+                        }
+                }
+                /*
+                 * "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
+                 */
+                if (c == ' ' && strncmp(from, "ipldelay=", 9) == 0) {
+			if (to != command_line) to--;
+                        delay = simple_strtoul(from+9, &from, 0);
+			if (*from == 's' || *from == 'S') {
+				delay = delay*1000000;
+				from++;
+			} else if (*from == 'm' || *from == 'M') {
+				delay = delay*60*1000000;
+				from++;
+			}
+			/* now wait for the requestion amount of time */
+			udelay(delay);
+                }
+                cn = *(from++);
+                if (!cn)
+                        break;
+                if (cn == '\n')
+                        cn = ' ';  /* replace newlines with space */
+                if (cn == ' ' && c == ' ')
+                        continue;  /* remove additional spaces */
+                c = cn;
+                if (COMMAND_LINE_SIZE <= ++len)
+                        break;
+                *(to++) = c;
+        }
+        if (c == ' ' && to > command_line) to--;
+        *to = '\0';
+        *cmdline_p = command_line;
+
+	/*
+	 * partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	start_pfn = (__pa(&_end) + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	end_pfn = memory_end >> PAGE_SHIFT;
+
+	/*
+	 * Initialize the boot-time allocator
+	 */
+	bootmap_size = init_bootmem(start_pfn, end_pfn);
+
+	/*
+	 * Register RAM pages with the bootmem allocator.
+	 */
+	free_bootmem(start_pfn << PAGE_SHIFT, 
+		     (end_pfn - start_pfn) << PAGE_SHIFT);
+
+        /*
+         * Reserve the bootmem bitmap itself as well. We do this in two
+         * steps (first step was init_bootmem()) because this catches
+         * the (very unlikely) case of us accidentally initializing the
+         * bootmem allocator with an invalid RAM area.
+         */
+        reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size);
+
+
+
+
+#ifdef CONFIG_BLK_DEV_INITRD
+        if (INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= memory_end) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE);
+			initrd_start = INITRD_START;
+			initrd_end = initrd_start + INITRD_SIZE;
+		} else {
+                        printk("initrd extends beyond end of memory "
+                               "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+                               initrd_start + INITRD_SIZE, memory_end);
+                        initrd_start = initrd_end = 0;
+		}
+        }
+#endif
+
+        paging_init();
+
+	res = alloc_bootmem_low(sizeof(struct resource));
+	res->start = 0;
+	res->end = memory_end;
+	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	request_resource(&iomem_resource, res);
+	request_resource(res, &code_resource);
+	request_resource(res, &data_resource);
+}
+
+void print_cpu_info(struct cpuinfo_S390 *cpuinfo)
+{
+   printk("cpu %d "
+#ifdef CONFIG_SMP
+           "phys_idx=%d "
+#endif
+           "vers=%02X ident=%06X machine=%04X unused=%04X\n",
+           cpuinfo->cpu_nr,
+#ifdef CONFIG_SMP
+           cpuinfo->cpu_addr,
+#endif
+           cpuinfo->cpu_id.version,
+           cpuinfo->cpu_id.ident,
+           cpuinfo->cpu_id.machine,
+           cpuinfo->cpu_id.unused);
+}
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+
+int get_cpuinfo(char * buffer)
+{
+        struct cpuinfo_S390 *cpuinfo;
+        char *p = buffer;
+        int i;
+
+        p += sprintf(p,"vendor_id       : IBM/S390\n"
+                       "# processors    : %i\n"
+                       "bogomips per cpu: %lu.%02lu\n",
+                       smp_num_cpus, loops_per_jiffy/(500000/HZ),
+                       (loops_per_jiffy/(5000/HZ))%100);
+        for (i = 0; i < smp_num_cpus; i++) {
+                cpuinfo = &safe_get_cpu_lowcore(i).cpu_data;
+                p += sprintf(p,"processor %i: "
+                               "version = %02X,  "
+                               "identification = %06X,  "
+                               "machine = %04X\n",
+                               i, cpuinfo->cpu_id.version,
+                               cpuinfo->cpu_id.ident,
+                               cpuinfo->cpu_id.machine);
+        }
+        return p - buffer;
+}
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)