patch-2.4.2 linux/include/asm-cris/uaccess.h
Next file: linux/include/asm-cris/ucontext.h
Previous file: linux/include/asm-cris/types.h
Back to the patch index
Back to the overall index
- Lines: 1076
- Date:
Thu Feb 8 16:32:44 2001
- Orig file:
v2.4.1/linux/include/asm-cris/uaccess.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.4.1/linux/include/asm-cris/uaccess.h linux/include/asm-cris/uaccess.h
@@ -0,0 +1,1075 @@
+/*
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ * Hans-Peter Nilsson (hp@axis.com)
+ *
+ * $Log: uaccess.h,v $
+ * Revision 1.5 2000/10/25 03:33:21 hp
+ * - Provide implementation for everything else but get_user and put_user;
+ * copying inline to/from user for constant length 0..16, 20, 24, and
+ * clearing for 0..4, 8, 12, 16, 20, 24, strncpy_from_user and strnlen_user
+ * always inline.
+ * - Constraints for destination addr in get_user cannot be memory, only reg.
+ * - Correct labels for PC at expected fault points.
+ * - Nits with assembly code.
+ * - Don't use statement expressions without value; use "do {} while (0)".
+ * - Return correct values from __generic_... functions.
+ *
+ * Revision 1.4 2000/09/12 16:28:25 bjornw
+ * * Removed comments from the get/put user asm code
+ * * Constrains for destination addr in put_user cannot be memory, only reg
+ *
+ * Revision 1.3 2000/09/12 14:30:20 bjornw
+ * MAX_ADDR_USER does not exist anymore
+ *
+ * Revision 1.2 2000/07/13 15:52:48 bjornw
+ * New user-access functions
+ *
+ * Revision 1.1.1.1 2000/07/10 16:32:31 bjornw
+ * CRIS architecture, working draft
+ *
+ *
+ *
+ */
+
+/* Asm:s have been tweaked (within the domain of correctness) to give
+ satisfactory results for "gcc version 2.96 20000427 (experimental)".
+
+ Check regularly...
+
+ Register r9 is chosen for temporaries, being a call-clobbered register
+ first in line to be used (notably for local blocks), not colliding with
+ parameter registers. */
+
+#ifndef _CRIS_UACCESS_H
+#define _CRIS_UACCESS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+/* addr_limit is the maximum accessible address for the task. we misuse
+ * the KERNEL_DS and USER_DS values to both assign and compare the
+ * addr_limit values through the equally misnamed get/set_fs macros.
+ * (see above)
+ */
+
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current->addr_limit)
+#define set_fs(x) (current->addr_limit = (x))
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size)))
+#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size)))
+#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
+
+extern inline int verify_area(int type, const void * addr, unsigned long size)
+{
+ return access_ok(type,addr,size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the uglyness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on
+ * CRIS, we can just do these as direct assignments. (Of course, the
+ * exception handling means that it's no longer "just"...)
+ */
+#define get_user(x,ptr) \
+ __get_user_check((x),(ptr),sizeof(*(ptr)))
+#define put_user(x,ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __get_user(x,ptr) \
+ __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __put_user(x,ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x,ptr,ret) \
+ do { if (put_user(x,ptr)) return ret; } while (0)
+
+#define get_user_ret(x,ptr,ret) \
+ do { if (get_user(x,ptr)) return ret; } while (0)
+
+#define __put_user_ret(x,ptr,ret) \
+ do { if (__put_user(x,ptr)) return ret; } while (0)
+
+#define __get_user_ret(x,ptr,ret) \
+ do { if (__get_user(x,ptr)) return ret; } while (0)
+
+
+extern long __put_user_bad(void);
+
+#define __put_user_nocheck(x,ptr,size) \
+({ \
+ long __pu_err; \
+ __put_user_size((x),(ptr),(size),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_check(x,ptr,size) \
+({ \
+ long __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) *__pu_addr = (ptr); \
+ if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
+ __put_user_size((x),__pu_addr,(size),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: __put_user_asm(x,ptr,retval,"move.b"); break; \
+ case 2: __put_user_asm(x,ptr,retval,"move.w"); break; \
+ case 4: __put_user_asm(x,ptr,retval,"move.d"); break; \
+ default: __put_user_bad(); \
+ } \
+} while (0)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ *
+ * Note that PC at a fault is the address *after* the faulting
+ * instruction.
+ */
+#define __put_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ " "op" %1,[%2]\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: move.d %3,%0\n" \
+ " jump 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .dword 2b,3b\n" \
+ " .previous\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "g" (-EFAULT), "0" (err))
+
+
+#define __get_user_nocheck(x,ptr,size) \
+({ \
+ long __gu_err, __gu_val; \
+ __get_user_size(__gu_val,(ptr),(size),__gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_err = -EFAULT, __gu_val = 0; \
+ const __typeof__(*(ptr)) *__gu_addr = (ptr); \
+ if (access_ok(VERIFY_READ,__gu_addr,size)) \
+ __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ switch (size) { \
+ case 1: __get_user_asm(x,ptr,retval,"move.b"); break; \
+ case 2: __get_user_asm(x,ptr,retval,"move.w"); break; \
+ case 4: __get_user_asm(x,ptr,retval,"move.d"); break; \
+ default: (x) = __get_user_bad(); \
+ } \
+} while (0)
+
+/* See comment before __put_user_asm. */
+
+#define __get_user_asm(x, addr, err, op) \
+ __asm__ __volatile__( \
+ " "op" [%2],%1\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: move.d %3,%0\n" \
+ " moveq 0,%1\n" \
+ " jump 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .dword 2b,3b\n" \
+ " .previous\n" \
+ : "=r" (err), "=r" (x) \
+ : "r" (addr), "g" (-EFAULT), "0" (err))
+
+/* More complex functions. Most are inline, but some call functions that
+ live in lib/usercopy.c */
+
+extern unsigned long __copy_user(void *to, const void *from, unsigned long n);
+extern unsigned long __copy_user_zeroing(void *to, const void *from, unsigned long n);
+extern unsigned long __do_clear_user(void *to, unsigned long n);
+
+/*
+ * Copy a null terminated string from userspace.
+ *
+ * Must return:
+ * -EFAULT for an exception
+ * count if we hit the buffer limit
+ * bytes copied if we hit a null byte
+ * (without the null byte)
+ */
+
+static inline long
+__do_strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res;
+
+ if (count == 0)
+ return 0;
+
+ /*
+ * Currently, in 2.4.0-test9, most ports use a simple byte-copy loop.
+ * So do we.
+ *
+ * This code is deduced from:
+ *
+ * char tmp2;
+ * long tmp1, tmp3
+ * tmp1 = count;
+ * while ((*dst++ = (tmp2 = *src++)) != 0
+ * && --tmp1)
+ * ;
+ *
+ * res = count - tmp1;
+ *
+ * with tweaks.
+ */
+
+ __asm__ __volatile__ (
+ " move.d %3,%0\n"
+ " move.b [%2+],r9\n"
+ "1: beq 2f\n"
+ " move.b r9,[%1+]\n"
+
+ " subq 1,%0\n"
+ " bne 1b\n"
+ " move.b [%2+],r9\n"
+
+ "2: sub.d %3,%0\n"
+ " neg.d %0,%0\n"
+ "3:\n"
+ " .section .fixup,\"ax\"\n"
+ "4: move.d %7,%0\n"
+ " jump 3b\n"
+
+ /* There's one address for a fault at the first move, and
+ two possible PC values for a fault at the second move,
+ being a delay-slot filler. However, the branch-target
+ for the second move is the same as the first address.
+ Just so you don't get confused... */
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .dword 1b,4b\n"
+ " .dword 2b,4b\n"
+ " .previous"
+ : "=r" (res), "=r" (dst), "=r" (src), "=r" (count)
+ : "3" (count), "1" (dst), "2" (src), "g" (-EFAULT)
+ : "r9");
+
+ return res;
+}
+
+static inline unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ return __copy_user(to,from,n);
+ return n;
+}
+
+static inline unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ return __copy_user_zeroing(to,from,n);
+ return n;
+}
+
+static inline unsigned long
+__generic_clear_user(void *to, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ return __do_clear_user(to,n);
+ return n;
+}
+
+static inline long
+__strncpy_from_user(char *dst, const char *src, long count)
+{
+ return __do_strncpy_from_user(dst, src, count);
+}
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ res = __do_strncpy_from_user(dst, src, count);
+ return res;
+}
+
+/* A few copy asms to build up the more complex ones from.
+
+ Note again, a post-increment is performed regardless of whether a bus
+ fault occurred in that instruction, and PC for a faulted insn is the
+ address *after* the insn. */
+
+#define __asm_copy_user_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm__ __volatile__ ( \
+ COPY \
+ "1:\n" \
+ " .section .fixup,\"ax\"\n" \
+ FIXUP \
+ " jump 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ TENTRY \
+ " .previous\n" \
+ : "=r" (to), "=r" (from), "=r" (ret) \
+ : "0" (to), "1" (from), "2" (ret) \
+ : "r9", "memory")
+
+#define __asm_copy_from_user_1(to, from, ret) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "2: move.b r9,[%0+]\n", \
+ "3: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ "2: move.w r9,[%0+]\n" COPY, \
+ "3: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_from_user_2(to, from, ret) \
+ __asm_copy_from_user_2x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_3(to, from, ret) \
+ __asm_copy_from_user_2x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "4: move.b r9,[%0+]\n", \
+ "5: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ "2: move.d r9,[%0+]\n" COPY, \
+ "3: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_from_user_4(to, from, ret) \
+ __asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_5(to, from, ret) \
+ __asm_copy_from_user_4x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "4: move.b r9,[%0+]\n", \
+ "5: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_4x_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ "4: move.w r9,[%0+]\n" COPY, \
+ "5: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_from_user_6(to, from, ret) \
+ __asm_copy_from_user_6x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_7(to, from, ret) \
+ __asm_copy_from_user_6x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "6: move.b r9,[%0+]\n", \
+ "7: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_4x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ "4: move.d r9,[%0+]\n" COPY, \
+ "5: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_from_user_8(to, from, ret) \
+ __asm_copy_from_user_8x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_9(to, from, ret) \
+ __asm_copy_from_user_8x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "6: move.b r9,[%0+]\n", \
+ "7: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_8x_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ "6: move.w r9,[%0+]\n" COPY, \
+ "7: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_from_user_10(to, from, ret) \
+ __asm_copy_from_user_10x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_11(to, from, ret) \
+ __asm_copy_from_user_10x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "8: move.b r9,[%0+]\n", \
+ "9: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_8x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ "6: move.d r9,[%0+]\n" COPY, \
+ "7: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_from_user_12(to, from, ret) \
+ __asm_copy_from_user_12x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_13(to, from, ret) \
+ __asm_copy_from_user_12x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "8: move.b r9,[%0+]\n", \
+ "9: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_12x_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ "8: move.w r9,[%0+]\n" COPY, \
+ "9: addq 2,%2\n" \
+ " clear.w [%0+]\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_from_user_14(to, from, ret) \
+ __asm_copy_from_user_14x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_15(to, from, ret) \
+ __asm_copy_from_user_14x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ "10: move.b r9,[%0+]\n", \
+ "11: addq 1,%2\n" \
+ " clear.b [%0+]\n", \
+ " .dword 10b,11b\n")
+
+#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_12x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ "8: move.d r9,[%0+]\n" COPY, \
+ "9: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_from_user_16(to, from, ret) \
+ __asm_copy_from_user_16x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_16x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ "10: move.d r9,[%0+]\n" COPY, \
+ "11: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 10b,11b\n" TENTRY)
+
+#define __asm_copy_from_user_20(to, from, ret) \
+ __asm_copy_from_user_20x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_from_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_from_user_20x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ "12: move.d r9,[%0+]\n" COPY, \
+ "13: addq 4,%2\n" \
+ " clear.d [%0+]\n" FIXUP, \
+ " .dword 12b,13b\n" TENTRY)
+
+#define __asm_copy_from_user_24(to, from, ret) \
+ __asm_copy_from_user_24x_cont(to, from, ret, "", "", "")
+
+/* And now, the to-user ones. */
+
+#define __asm_copy_to_user_1(to, from, ret) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n2:\n", \
+ "3: addq 1,%2\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_copy_to_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ " move.w r9,[%0+]\n2:\n" COPY, \
+ "3: addq 2,%2\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_to_user_2(to, from, ret) \
+ __asm_copy_to_user_2x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_3(to, from, ret) \
+ __asm_copy_to_user_2x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n4:\n", \
+ "5: addq 1,%2\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_to_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_user_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ " move.d r9,[%0+]\n2:\n" COPY, \
+ "3: addq 4,%2\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_copy_to_user_4(to, from, ret) \
+ __asm_copy_to_user_4x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_5(to, from, ret) \
+ __asm_copy_to_user_4x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n4:\n", \
+ "5: addq 1,%2\n", \
+ " .dword 4b,5b\n")
+
+#define __asm_copy_to_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_4x_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ " move.w r9,[%0+]\n4:\n" COPY, \
+ "5: addq 2,%2\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_to_user_6(to, from, ret) \
+ __asm_copy_to_user_6x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_7(to, from, ret) \
+ __asm_copy_to_user_6x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n6:\n", \
+ "7: addq 1,%2\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_to_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_4x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ " move.d r9,[%0+]\n4:\n" COPY, \
+ "5: addq 4,%2\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_copy_to_user_8(to, from, ret) \
+ __asm_copy_to_user_8x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_9(to, from, ret) \
+ __asm_copy_to_user_8x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n6:\n", \
+ "7: addq 1,%2\n", \
+ " .dword 6b,7b\n")
+
+#define __asm_copy_to_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_8x_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ " move.w r9,[%0+]\n6:\n" COPY, \
+ "7: addq 2,%2\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_to_user_10(to, from, ret) \
+ __asm_copy_to_user_10x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_11(to, from, ret) \
+ __asm_copy_to_user_10x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n8:\n", \
+ "9: addq 1,%2\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_to_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_8x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ " move.d r9,[%0+]\n6:\n" COPY, \
+ "7: addq 4,%2\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_copy_to_user_12(to, from, ret) \
+ __asm_copy_to_user_12x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_13(to, from, ret) \
+ __asm_copy_to_user_12x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n8:\n", \
+ "9: addq 1,%2\n", \
+ " .dword 8b,9b\n")
+
+#define __asm_copy_to_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_12x_cont(to, from, ret, \
+ " move.w [%1+],r9\n" \
+ " move.w r9,[%0+]\n8:\n" COPY, \
+ "9: addq 2,%2\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_to_user_14(to, from, ret) \
+ __asm_copy_to_user_14x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_15(to, from, ret) \
+ __asm_copy_to_user_14x_cont(to, from, ret, \
+ " move.b [%1+],r9\n" \
+ " move.b r9,[%0+]\n10:\n", \
+ "11: addq 1,%2\n", \
+ " .dword 10b,11b\n")
+
+#define __asm_copy_to_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_12x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ " move.d r9,[%0+]\n8:\n" COPY, \
+ "9: addq 4,%2\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_copy_to_user_16(to, from, ret) \
+ __asm_copy_to_user_16x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_20x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_16x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ " move.d r9,[%0+]\n10:\n" COPY, \
+ "11: addq 4,%2\n" FIXUP, \
+ " .dword 10b,11b\n" TENTRY)
+
+#define __asm_copy_to_user_20(to, from, ret) \
+ __asm_copy_to_user_20x_cont(to, from, ret, "", "", "")
+
+#define __asm_copy_to_user_24x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
+ __asm_copy_to_user_20x_cont(to, from, ret, \
+ " move.d [%1+],r9\n" \
+ " move.d r9,[%0+]\n12:\n" COPY, \
+ "13: addq 4,%2\n" FIXUP, \
+ " .dword 12b,13b\n" TENTRY)
+
+#define __asm_copy_to_user_24(to, from, ret) \
+ __asm_copy_to_user_24x_cont(to, from, ret, "", "", "")
+
+/* Define a few clearing asms with exception handlers. */
+
+/* This frame-asm is like the __asm_copy_user_cont one, but has one less
+ input. */
+
+#define __asm_clear(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm__ __volatile__ ( \
+ CLEAR \
+ "1:\n" \
+ " .section .fixup,\"ax\"\n" \
+ FIXUP \
+ " jump 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ TENTRY \
+ " .previous" \
+ : "=r" (to), "=r" (ret) \
+ : "0" (to), "1" (ret) \
+ : "r9", "memory")
+
+#define __asm_clear_1(to, ret) \
+ __asm_clear(to, ret, \
+ " clear.b [%0+]\n2:\n", \
+ "3: addq 1,%1\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_clear_2(to, ret) \
+ __asm_clear(to, ret, \
+ " clear.w [%0+]\n2:\n", \
+ "3: addq 2,%1\n", \
+ " .dword 2b,3b\n")
+
+#define __asm_clear_3(to, ret) \
+ __asm_clear(to, ret, \
+ " clear.w [%0+]\n" \
+ "2: clear.b [%0+]\n3:\n", \
+ "4: addq 2,%1\n" \
+ "5: addq 1,%1\n", \
+ " .dword 2b,4b\n" \
+ " .dword 3b,5b\n")
+
+#define __asm_clear_4x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear(to, ret, \
+ " clear.d [%0+]\n2:\n" CLEAR, \
+ "3: addq 4,%1\n" FIXUP, \
+ " .dword 2b,3b\n" TENTRY)
+
+#define __asm_clear_4(to, ret) \
+ __asm_clear_4x_cont(to, ret, "", "", "")
+
+#define __asm_clear_8x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_4x_cont(to, ret, \
+ " clear.d [%0+]\n4:\n" CLEAR, \
+ "5: addq 4,%1\n" FIXUP, \
+ " .dword 4b,5b\n" TENTRY)
+
+#define __asm_clear_8(to, ret) \
+ __asm_clear_8x_cont(to, ret, "", "", "")
+
+#define __asm_clear_12x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_8x_cont(to, ret, \
+ " clear.d [%0+]\n6:\n" CLEAR, \
+ "7: addq 4,%1\n" FIXUP, \
+ " .dword 6b,7b\n" TENTRY)
+
+#define __asm_clear_12(to, ret) \
+ __asm_clear_12x_cont(to, ret, "", "", "")
+
+#define __asm_clear_16x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_12x_cont(to, ret, \
+ " clear.d [%0+]\n8:\n" CLEAR, \
+ "9: addq 4,%1\n" FIXUP, \
+ " .dword 8b,9b\n" TENTRY)
+
+#define __asm_clear_16(to, ret) \
+ __asm_clear_16x_cont(to, ret, "", "", "")
+
+#define __asm_clear_20x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_16x_cont(to, ret, \
+ " clear.d [%0+]\n10:\n" CLEAR, \
+ "11: addq 4,%1\n" FIXUP, \
+ " .dword 10b,11b\n" TENTRY)
+
+#define __asm_clear_20(to, ret) \
+ __asm_clear_20x_cont(to, ret, "", "", "")
+
+#define __asm_clear_24x_cont(to, ret, CLEAR, FIXUP, TENTRY) \
+ __asm_clear_20x_cont(to, ret, \
+ " clear.d [%0+]\n12:\n" CLEAR, \
+ "13: addq 4,%1\n" FIXUP, \
+ " .dword 12b,13b\n" TENTRY)
+
+#define __asm_clear_24(to, ret) \
+ __asm_clear_24x_cont(to, ret, "", "", "")
+
+/* Note that if these expand awfully if made into switch constructs, so
+ don't do that. */
+
+static inline unsigned long
+__constant_copy_from_user(void *to, const void *from, unsigned long n)
+{
+ unsigned long ret = 0;
+ if (n == 0)
+ ;
+ else if (n == 1)
+ __asm_copy_from_user_1(to, from, ret);
+ else if (n == 2)
+ __asm_copy_from_user_2(to, from, ret);
+ else if (n == 3)
+ __asm_copy_from_user_3(to, from, ret);
+ else if (n == 4)
+ __asm_copy_from_user_4(to, from, ret);
+ else if (n == 5)
+ __asm_copy_from_user_5(to, from, ret);
+ else if (n == 6)
+ __asm_copy_from_user_6(to, from, ret);
+ else if (n == 7)
+ __asm_copy_from_user_7(to, from, ret);
+ else if (n == 8)
+ __asm_copy_from_user_8(to, from, ret);
+ else if (n == 9)
+ __asm_copy_from_user_9(to, from, ret);
+ else if (n == 10)
+ __asm_copy_from_user_10(to, from, ret);
+ else if (n == 11)
+ __asm_copy_from_user_11(to, from, ret);
+ else if (n == 12)
+ __asm_copy_from_user_12(to, from, ret);
+ else if (n == 13)
+ __asm_copy_from_user_13(to, from, ret);
+ else if (n == 14)
+ __asm_copy_from_user_14(to, from, ret);
+ else if (n == 15)
+ __asm_copy_from_user_15(to, from, ret);
+ else if (n == 16)
+ __asm_copy_from_user_16(to, from, ret);
+ else if (n == 20)
+ __asm_copy_from_user_20(to, from, ret);
+ else if (n == 24)
+ __asm_copy_from_user_24(to, from, ret);
+ else
+ ret = __generic_copy_from_user(to, from, n);
+
+ return ret;
+}
+
+/* Ditto, don't make a switch out of this. */
+
+static inline unsigned long
+__constant_copy_to_user(void *to, const void *from, unsigned long n)
+{
+ unsigned long ret = 0;
+ if (n == 0)
+ ;
+ else if (n == 1)
+ __asm_copy_to_user_1(to, from, ret);
+ else if (n == 2)
+ __asm_copy_to_user_2(to, from, ret);
+ else if (n == 3)
+ __asm_copy_to_user_3(to, from, ret);
+ else if (n == 4)
+ __asm_copy_to_user_4(to, from, ret);
+ else if (n == 5)
+ __asm_copy_to_user_5(to, from, ret);
+ else if (n == 6)
+ __asm_copy_to_user_6(to, from, ret);
+ else if (n == 7)
+ __asm_copy_to_user_7(to, from, ret);
+ else if (n == 8)
+ __asm_copy_to_user_8(to, from, ret);
+ else if (n == 9)
+ __asm_copy_to_user_9(to, from, ret);
+ else if (n == 10)
+ __asm_copy_to_user_10(to, from, ret);
+ else if (n == 11)
+ __asm_copy_to_user_11(to, from, ret);
+ else if (n == 12)
+ __asm_copy_to_user_12(to, from, ret);
+ else if (n == 13)
+ __asm_copy_to_user_13(to, from, ret);
+ else if (n == 14)
+ __asm_copy_to_user_14(to, from, ret);
+ else if (n == 15)
+ __asm_copy_to_user_15(to, from, ret);
+ else if (n == 16)
+ __asm_copy_to_user_16(to, from, ret);
+ else if (n == 20)
+ __asm_copy_to_user_20(to, from, ret);
+ else if (n == 24)
+ __asm_copy_to_user_24(to, from, ret);
+ else
+ ret = __generic_copy_to_user(to, from, n);
+
+ return ret;
+}
+
+/* No switch, please. */
+
+static inline unsigned long
+__constant_clear_user(void *to, unsigned long n)
+{
+ unsigned long ret = 0;
+ if (n == 0)
+ ;
+ else if (n == 1)
+ __asm_clear_1(to, ret);
+ else if (n == 2)
+ __asm_clear_2(to, ret);
+ else if (n == 3)
+ __asm_clear_3(to, ret);
+ else if (n == 4)
+ __asm_clear_4(to, ret);
+ else if (n == 8)
+ __asm_clear_8(to, ret);
+ else if (n == 12)
+ __asm_clear_12(to, ret);
+ else if (n == 16)
+ __asm_clear_16(to, ret);
+ else if (n == 20)
+ __asm_clear_20(to, ret);
+ else if (n == 24)
+ __asm_clear_24(to, ret);
+ else
+ ret = __generic_clear_user(to, n);
+
+ return ret;
+}
+
+
+#define clear_user(to, n) \
+(__builtin_constant_p(n) ? \
+ __constant_clear_user(to, n) : \
+ __generic_clear_user(to, n))
+
+#define copy_from_user(to, from, n) \
+(__builtin_constant_p(n) ? \
+ __constant_copy_from_user(to, from, n) : \
+ __generic_copy_from_user(to, from, n))
+
+#define copy_to_user(to, from, n) \
+(__builtin_constant_p(n) ? \
+ __constant_copy_to_user(to, from, n) : \
+ __generic_copy_to_user(to, from, n))
+
+#define copy_to_user_ret(to,from,n,retval) \
+ do { if (copy_to_user(to,from,n)) return retval; } while (0)
+#define copy_from_user_ret(to,from,n,retval) \
+ do { if (copy_from_user(to,from,n)) return retval; } while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+
+static inline unsigned long
+__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
+{
+ return __copy_user_zeroing(to,from,n);
+}
+
+static inline unsigned long
+__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
+{
+ return __copy_user(to,from,n);
+}
+
+static inline unsigned long
+__generic_clear_user_nocheck(void *to, unsigned long n)
+{
+ return __do_clear_user(to,n);
+}
+
+/* without checking */
+
+#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n))
+#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n))
+#define __clear_user(to,n) __generic_clear_user_nocheck((to),(n))
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return length of string in userspace including terminating 0
+ * or 0 for error. Return a value greater than N if too long.
+ */
+
+static inline long
+strnlen_user(const char *s, long n)
+{
+ long res, tmp1, tmp2;
+
+ if (!access_ok(VERIFY_READ, s, 0))
+ return 0;
+
+ /*
+ * This code is deduced from:
+ *
+ * tmp1 = n;
+ * while (tmp1-- > 0 && *s++)
+ * ;
+ *
+ * res = n - tmp1;
+ *
+ * (with tweaks).
+ */
+
+ __asm__ __volatile__ (
+ " move.d %1,r9\n"
+ "0:\n"
+ " ble 1f\n"
+ " subq 1,r9\n"
+
+ " test.b [%0+]\n"
+ " bne 0b\n"
+ " test.d r9\n"
+ "1:\n"
+ " move.d %1,%0\n"
+ " sub.d r9,%0\n"
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+
+ "3: clear.d %0\n"
+ " jump 2b\n"
+
+ /* There's one address for a fault at the first move, and
+ two possible PC values for a fault at the second move,
+ being a delay-slot filler. However, the branch-target
+ for the second move is the same as the first address.
+ Just so you don't get confused... */
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .dword 0b,3b\n"
+ " .dword 1b,3b\n"
+ " .previous\n"
+ : "=r" (res), "=r" (tmp1)
+ : "0" (s), "1" (n)
+ : "r9");
+
+ return res;
+}
+
+#define strlen_user(str) strnlen_user((str), 0x7ffffffe)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _CRIS_UACCESS_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)