patch-2.4.23 linux-2.4.23/drivers/net/sk98lin/h/lm80.h

• Lines: 77
• Date: 2003-11-28 10:26:20.000000000 -0800
• Orig file: linux-2.4.22/drivers/net/sk98lin/h/lm80.h
• Orig date: 2003-06-13 07:51:35.000000000 -0700

diff -urN linux-2.4.22/drivers/net/sk98lin/h/lm80.h linux-2.4.23/drivers/net/sk98lin/h/lm80.h
@@ -1,9 +1,9 @@
 /******************************************************************************
  *
  * Name:	lm80.h	
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.4 $
- * Date:	$Date: 2002/04/25 11:04:10 $
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.6 $
+ * Date:	$Date: 2003/05/13 17:26:52 $
  * Purpose:	Contains all defines for the LM80 Chip
  *		(National Semiconductor).
  *
@@ -11,7 +11,8 @@
 
 /******************************************************************************
  *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -26,6 +27,13 @@
  *
  * History:
  *	$Log: lm80.h,v $
+ *	Revision 1.6  2003/05/13 17:26:52  mkarl
+ *	Editorial changes.
+ *	
+ *	Revision 1.5  2003/03/31 07:15:18  mkarl
+ *	Corrected Copyright.
+ *	Editorial changes.
+ *	
  *	Revision 1.4  2002/04/25 11:04:10  rschmidt
  *	Editorial changes
  *	
@@ -55,8 +63,8 @@
  *
  * All registers are 8 bit wide
  */
-#define	LM80_CFG			0x00	/* Configuration Register */
-#define	LM80_ISRC_1			0x01	/* Interrupt Status Register 1 */
+#define LM80_CFG			0x00	/* Configuration Register */
+#define LM80_ISRC_1			0x01	/* Interrupt Status Register 1 */
 #define LM80_ISRC_2			0x02	/* Interrupt Status Register 2 */
 #define LM80_IMSK_1			0x03	/* Interrupt Mask Register 1 */
 #define LM80_IMSK_2			0x04	/* Interrupt Mask Register 2 */
@@ -93,8 +101,8 @@
 #define LM80_THOT_LIM_LO	0x39	/* hot temperature limit (low) */
 #define LM80_TOS_LIM_UP		0x3a	/* OS temperature limit (high) */
 #define LM80_TOS_LIM_LO		0x3b	/* OS temperature limit (low) */
-#define	LM80_FAN1_COUNT_LIM	0x3c	/* Fan 1 count limit (high) */
-#define	LM80_FAN2_COUNT_LIM	0x3d	/* Fan 2 count limit (low) */
+#define LM80_FAN1_COUNT_LIM	0x3c	/* Fan 1 count limit (high) */
+#define LM80_FAN2_COUNT_LIM	0x3d	/* Fan 2 count limit (low) */
 	/* 0x3e - 0x3f reserved	*/
 
 /*
@@ -124,7 +132,7 @@
 
 /*	LM80_ISRC_2		Interrupt Status Register 2 */
 /*	LM80_IMSK_2		Interrupt Mask Register 2 */
-#define	LM80_IS_TEMP		(1<<0)	/* HOT temperature limit exceeded */
+#define LM80_IS_TEMP		(1<<0)	/* HOT temperature limit exceeded */
 #define LM80_IS_BTI			(1<<1)	/* state of BTI# pin */
 #define LM80_IS_FAN1		(1<<2)	/* count limit exceeded for Fan 1 */
 #define LM80_IS_FAN2		(1<<3)	/* count limit exceeded for Fan 2 */
@@ -143,7 +151,7 @@
 #define LM80_FAN_RST_ENA	(1<<7)	/* sets RST_OUT#/OS# pins in RST mode */
 
 /*	LM80_TEMP_CTRL		OS# Config, Temp Res. Reg */
-#define	LM80_TEMP_OS_STAT	(1<<0)	/* mirrors the state of RST_OUT#/OS# */
+#define LM80_TEMP_OS_STAT	(1<<0)	/* mirrors the state of RST_OUT#/OS# */
 #define LM80_TEMP_OS_POL	(1<<1)	/* select OS# polarity */
 #define LM80_TEMP_OS_MODE	(1<<2)	/* selects Interrupt mode */
 #define LM80_TEMP_RES		(1<<3)	/* selects 9 or 11 bit temp resulution*/