patch-2.4.27 linux-2.4.27/drivers/net/wan/farsync.c
Next file: linux-2.4.27/drivers/net/wan/farsync.h
Previous file: linux-2.4.27/drivers/net/via-rhine.c
Back to the patch index
Back to the overall index
- Lines: 3882
- Date:
2004-08-07 16:26:05.168367898 -0700
- Orig file:
linux-2.4.26/drivers/net/wan/farsync.c
- Orig date:
2003-11-28 10:26:20.000000000 -0800
diff -urN linux-2.4.26/drivers/net/wan/farsync.c linux-2.4.27/drivers/net/wan/farsync.c
@@ -1,9 +1,9 @@
/*
- * FarSync X21 driver for Linux (generic HDLC version)
+ * FarSync WAN driver for Linux (2.4.x kernel version)
*
* Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards
*
- * Copyright (C) 2001 FarSite Communications Ltd.
+ * Copyright (C) 2001-2004 FarSite Communications Ltd.
* www.farsite.co.uk
*
* This program is free software; you can redistribute it and/or
@@ -11,66 +11,81 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Author: R.J.Dunlop <bob.dunlop@farsite.co.uk>
+ * Author: R.J.Dunlop <bob.dunlop@farsite.co.uk>
+ * Maintainer: Kevin Curtis <kevin.curtis@farsite.co.uk>
*/
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/version.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/if.h>
#include <linux/hdlc.h>
+#include <asm/delay.h>
#include "farsync.h"
-
/*
* Module info
*/
MODULE_AUTHOR("R.J.Dunlop <bob.dunlop@farsite.co.uk>");
-MODULE_DESCRIPTION("FarSync T-Series X21 driver. FarSite Communications Ltd.");
+MODULE_DESCRIPTION("FarSync T-Series WAN driver. FarSite Communications Ltd.");
+MODULE_PARM(fst_txq_low, "i");
+MODULE_PARM(fst_txq_high, "i");
+MODULE_PARM(fst_max_reads, "i");
+MODULE_PARM(fst_excluded_cards, "i");
+MODULE_PARM(fst_excluded_list, "0-32i");
MODULE_LICENSE("GPL");
EXPORT_NO_SYMBOLS;
-
/* Driver configuration and global parameters
* ==========================================
*/
-/* Number of ports (per card) supported
+/* Number of ports (per card) and cards supported
*/
#define FST_MAX_PORTS 4
-
-
-/* PCI vendor and device IDs
- */
-#define FSC_PCI_VENDOR_ID 0x1619 /* FarSite Communications Ltd */
-#define T2P_PCI_DEVICE_ID 0x0400 /* T2P X21 2 port card */
-#define T4P_PCI_DEVICE_ID 0x0440 /* T4P X21 4 port card */
-
+#define FST_MAX_CARDS 32
/* Default parameters for the link
*/
-#define FST_TX_QUEUE_LEN 100 /* At 8Mbps a longer queue length is
- * useful, the syncppp module forces
- * this down assuming a slower line I
- * guess.
- */
-#define FST_MAX_MTU 8000 /* Huge but possible */
-#define FST_DEF_MTU 1500 /* Common sane value */
+#define FST_TX_QUEUE_LEN 100 /* At 8Mbps a longer queue length is
+ * useful, the syncppp module forces
+ * this down assuming a slower line I
+ * guess.
+ */
+#define FST_TXQ_DEPTH 16 /* This one is for the buffering
+ * of frames on the way down to the card
+ * so that we can keep the card busy
+ * and maximise throughput
+ */
+#define FST_HIGH_WATER_MARK 12 /* Point at which we flow control
+ * network layer */
+#define FST_LOW_WATER_MARK 8 /* Point at which we remove flow
+ * control from network layer */
+#define FST_MAX_MTU 8000 /* Huge but possible */
+#define FST_DEF_MTU 1500 /* Common sane value */
#define FST_TX_TIMEOUT (2*HZ)
-
#ifdef ARPHRD_RAWHDLC
-#define ARPHRD_MYTYPE ARPHRD_RAWHDLC /* Raw frames */
+#define ARPHRD_MYTYPE ARPHRD_RAWHDLC /* Raw frames */
#else
-#define ARPHRD_MYTYPE ARPHRD_HDLC /* Cisco-HDLC (keepalives etc) */
+#define ARPHRD_MYTYPE ARPHRD_HDLC /* Cisco-HDLC (keepalives etc) */
#endif
+/*
+ * Modules parameters and associated varaibles
+ */
+int fst_txq_low = FST_LOW_WATER_MARK;
+int fst_txq_high = FST_HIGH_WATER_MARK;
+int fst_max_reads = 7;
+int fst_excluded_cards = 0;
+int fst_excluded_list[FST_MAX_CARDS];
/* Card shared memory layout
* =========================
@@ -87,58 +102,57 @@
* be used to check that we have not got out of step with the firmware
* contained in the .CDE files.
*/
-#define SMC_VERSION 11
+#define SMC_VERSION 24
-#define FST_MEMSIZE 0x100000 /* Size of card memory (1Mb) */
+#define FST_MEMSIZE 0x100000 /* Size of card memory (1Mb) */
-#define SMC_BASE 0x00002000L /* Base offset of the shared memory window main
- * configuration structure */
-#define BFM_BASE 0x00010000L /* Base offset of the shared memory window DMA
- * buffers */
+#define SMC_BASE 0x00002000L /* Base offset of the shared memory window main
+ * configuration structure */
+#define BFM_BASE 0x00010000L /* Base offset of the shared memory window DMA
+ * buffers */
-#define LEN_TX_BUFFER 8192 /* Size of packet buffers */
+#define LEN_TX_BUFFER 8192 /* Size of packet buffers */
#define LEN_RX_BUFFER 8192
-#define LEN_SMALL_TX_BUFFER 256 /* Size of obsolete buffs used for DOS diags */
+#define LEN_SMALL_TX_BUFFER 256 /* Size of obsolete buffs used for DOS diags */
#define LEN_SMALL_RX_BUFFER 256
-#define NUM_TX_BUFFER 2 /* Must be power of 2. Fixed by firmware */
+#define NUM_TX_BUFFER 2 /* Must be power of 2. Fixed by firmware */
#define NUM_RX_BUFFER 8
/* Interrupt retry time in milliseconds */
#define INT_RETRY_TIME 2
-
/* The Am186CH/CC processors support a SmartDMA mode using circular pools
* of buffer descriptors. The structure is almost identical to that used
* in the LANCE Ethernet controllers. Details available as PDF from the
* AMD web site: http://www.amd.com/products/epd/processors/\
* 2.16bitcont/3.am186cxfa/a21914/21914.pdf
*/
-struct txdesc { /* Transmit descriptor */
- volatile u16 ladr; /* Low order address of packet. This is a
- * linear address in the Am186 memory space
- */
- volatile u8 hadr; /* High order address. Low 4 bits only, high 4
- * bits must be zero
- */
- volatile u8 bits; /* Status and config */
- volatile u16 bcnt; /* 2s complement of packet size in low 15 bits.
- * Transmit terminal count interrupt enable in
- * top bit.
- */
- u16 unused; /* Not used in Tx */
+struct txdesc { /* Transmit descriptor */
+ volatile u16 ladr; /* Low order address of packet. This is a
+ * linear address in the Am186 memory space
+ */
+ volatile u8 hadr; /* High order address. Low 4 bits only, high 4
+ * bits must be zero
+ */
+ volatile u8 bits; /* Status and config */
+ volatile u16 bcnt; /* 2s complement of packet size in low 15 bits.
+ * Transmit terminal count interrupt enable in
+ * top bit.
+ */
+ u16 unused; /* Not used in Tx */
};
-struct rxdesc { /* Receive descriptor */
- volatile u16 ladr; /* Low order address of packet */
- volatile u8 hadr; /* High order address */
- volatile u8 bits; /* Status and config */
- volatile u16 bcnt; /* 2s complement of buffer size in low 15 bits.
- * Receive terminal count interrupt enable in
- * top bit.
- */
- volatile u16 mcnt; /* Message byte count (15 bits) */
+struct rxdesc { /* Receive descriptor */
+ volatile u16 ladr; /* Low order address of packet */
+ volatile u8 hadr; /* High order address */
+ volatile u8 bits; /* Status and config */
+ volatile u16 bcnt; /* 2s complement of buffer size in low 15 bits.
+ * Receive terminal count interrupt enable in
+ * top bit.
+ */
+ volatile u16 mcnt; /* Message byte count (15 bits) */
};
/* Convert a length into the 15 bit 2's complement */
@@ -149,57 +163,99 @@
#define cnv_bcnt(len) (-(len))
/* Status and config bits for the above */
-#define DMA_OWN 0x80 /* SmartDMA owns the descriptor */
-#define TX_STP 0x02 /* Tx: start of packet */
-#define TX_ENP 0x01 /* Tx: end of packet */
-#define RX_ERR 0x40 /* Rx: error (OR of next 4 bits) */
-#define RX_FRAM 0x20 /* Rx: framing error */
-#define RX_OFLO 0x10 /* Rx: overflow error */
-#define RX_CRC 0x08 /* Rx: CRC error */
-#define RX_HBUF 0x04 /* Rx: buffer error */
-#define RX_STP 0x02 /* Rx: start of packet */
-#define RX_ENP 0x01 /* Rx: end of packet */
-
+#define DMA_OWN 0x80 /* SmartDMA owns the descriptor */
+#define TX_STP 0x02 /* Tx: start of packet */
+#define TX_ENP 0x01 /* Tx: end of packet */
+#define RX_ERR 0x40 /* Rx: error (OR of next 4 bits) */
+#define RX_FRAM 0x20 /* Rx: framing error */
+#define RX_OFLO 0x10 /* Rx: overflow error */
+#define RX_CRC 0x08 /* Rx: CRC error */
+#define RX_HBUF 0x04 /* Rx: buffer error */
+#define RX_STP 0x02 /* Rx: start of packet */
+#define RX_ENP 0x01 /* Rx: end of packet */
-/* Interrupts from the card are caused by various events and these are presented
+/* Interrupts from the card are caused by various events which are presented
* in a circular buffer as several events may be processed on one physical int
*/
#define MAX_CIRBUFF 32
struct cirbuff {
- u8 rdindex; /* read, then increment and wrap */
- u8 wrindex; /* write, then increment and wrap */
- u8 evntbuff[MAX_CIRBUFF];
+ u8 rdindex; /* read, then increment and wrap */
+ u8 wrindex; /* write, then increment and wrap */
+ u8 evntbuff[MAX_CIRBUFF];
};
/* Interrupt event codes.
* Where appropriate the two low order bits indicate the port number
*/
-#define CTLA_CHG 0x18 /* Control signal changed */
+#define CTLA_CHG 0x18 /* Control signal changed */
#define CTLB_CHG 0x19
#define CTLC_CHG 0x1A
#define CTLD_CHG 0x1B
-#define INIT_CPLT 0x20 /* Initialisation complete */
-#define INIT_FAIL 0x21 /* Initialisation failed */
+#define INIT_CPLT 0x20 /* Initialisation complete */
+#define INIT_FAIL 0x21 /* Initialisation failed */
-#define ABTA_SENT 0x24 /* Abort sent */
+#define ABTA_SENT 0x24 /* Abort sent */
#define ABTB_SENT 0x25
#define ABTC_SENT 0x26
#define ABTD_SENT 0x27
-#define TXA_UNDF 0x28 /* Transmission underflow */
+#define TXA_UNDF 0x28 /* Transmission underflow */
#define TXB_UNDF 0x29
#define TXC_UNDF 0x2A
#define TXD_UNDF 0x2B
+#define F56_INT 0x2C
+#define M32_INT 0x2D
+
+#define TE1_ALMA 0x30
/* Port physical configuration. See farsync.h for field values */
struct port_cfg {
- u16 lineInterface; /* Physical interface type */
- u8 x25op; /* Unused at present */
- u8 internalClock; /* 1 => internal clock, 0 => external */
- u32 lineSpeed; /* Speed in bps */
+ u16 lineInterface; /* Physical interface type */
+ u8 x25op; /* Unused at present */
+ u8 internalClock; /* 1 => internal clock, 0 => external */
+ u8 transparentMode; /* 1 => on, 0 => off */
+ u8 invertClock; /* 0 => normal, 1 => inverted */
+ u8 padBytes[6]; /* Padding */
+ u32 lineSpeed; /* Speed in bps */
+};
+
+/* TE1 port physical configuration */
+struct su_config {
+ u32 dataRate;
+ u8 clocking;
+ u8 framing;
+ u8 structure;
+ u8 interface;
+ u8 coding;
+ u8 lineBuildOut;
+ u8 equalizer;
+ u8 transparentMode;
+ u8 loopMode;
+ u8 range;
+ u8 txBufferMode;
+ u8 rxBufferMode;
+ u8 startingSlot;
+ u8 losThreshold;
+ u8 enableIdleCode;
+ u8 idleCode;
+ u8 spare[44];
+};
+
+/* TE1 Status */
+struct su_status {
+ u32 receiveBufferDelay;
+ u32 framingErrorCount;
+ u32 codeViolationCount;
+ u32 crcErrorCount;
+ u32 lineAttenuation;
+ u8 portStarted;
+ u8 lossOfSignal;
+ u8 receiveRemoteAlarm;
+ u8 alarmIndicationSignal;
+ u8 spare[40];
};
/* Finally sling all the above together into the shared memory structure.
@@ -209,114 +265,151 @@
* See farsync.h for some field values.
*/
struct fst_shared {
- /* DMA descriptor rings */
- struct rxdesc rxDescrRing[FST_MAX_PORTS][NUM_RX_BUFFER];
- struct txdesc txDescrRing[FST_MAX_PORTS][NUM_TX_BUFFER];
+ /* DMA descriptor rings */
+ struct rxdesc rxDescrRing[FST_MAX_PORTS][NUM_RX_BUFFER];
+ struct txdesc txDescrRing[FST_MAX_PORTS][NUM_TX_BUFFER];
+
+ /* Obsolete small buffers */
+ u8 smallRxBuffer[FST_MAX_PORTS][NUM_RX_BUFFER][LEN_SMALL_RX_BUFFER];
+ u8 smallTxBuffer[FST_MAX_PORTS][NUM_TX_BUFFER][LEN_SMALL_TX_BUFFER];
- /* Obsolete small buffers */
- u8 smallRxBuffer[FST_MAX_PORTS][NUM_RX_BUFFER][LEN_SMALL_RX_BUFFER];
- u8 smallTxBuffer[FST_MAX_PORTS][NUM_TX_BUFFER][LEN_SMALL_TX_BUFFER];
+ u8 taskStatus; /* 0x00 => initialising, 0x01 => running,
+ * 0xFF => halted
+ */
- u8 taskStatus; /* 0x00 => initialising, 0x01 => running,
- * 0xFF => halted
- */
+ u8 interruptHandshake; /* Set to 0x01 by adapter to signal interrupt,
+ * set to 0xEE by host to acknowledge interrupt
+ */
- u8 interruptHandshake; /* Set to 0x01 by adapter to signal interrupt,
- * set to 0xEE by host to acknowledge interrupt
- */
+ u16 smcVersion; /* Must match SMC_VERSION */
- u16 smcVersion; /* Must match SMC_VERSION */
+ u32 smcFirmwareVersion; /* 0xIIVVRRBB where II = product ID, VV = major
+ * version, RR = revision and BB = build
+ */
- u32 smcFirmwareVersion; /* 0xIIVVRRBB where II = product ID, VV = major
- * version, RR = revision and BB = build
- */
+ u16 txa_done; /* Obsolete completion flags */
+ u16 rxa_done;
+ u16 txb_done;
+ u16 rxb_done;
+ u16 txc_done;
+ u16 rxc_done;
+ u16 txd_done;
+ u16 rxd_done;
- u16 txa_done; /* Obsolete completion flags */
- u16 rxa_done;
- u16 txb_done;
- u16 rxb_done;
- u16 txc_done;
- u16 rxc_done;
- u16 txd_done;
- u16 rxd_done;
+ u16 mailbox[4]; /* Diagnostics mailbox. Not used */
- u16 mailbox[4]; /* Diagnostics mailbox. Not used */
+ struct cirbuff interruptEvent; /* interrupt causes */
- struct cirbuff interruptEvent; /* interrupt causes */
+ u32 v24IpSts[FST_MAX_PORTS]; /* V.24 control input status */
+ u32 v24OpSts[FST_MAX_PORTS]; /* V.24 control output status */
- u32 v24IpSts[FST_MAX_PORTS]; /* V.24 control input status */
- u32 v24OpSts[FST_MAX_PORTS]; /* V.24 control output status */
+ struct port_cfg portConfig[FST_MAX_PORTS];
- struct port_cfg portConfig[FST_MAX_PORTS];
+ u16 clockStatus[FST_MAX_PORTS]; /* lsb: 0=> present, 1=> absent */
- u16 clockStatus[FST_MAX_PORTS]; /* lsb: 0=> present, 1=> absent */
+ u16 cableStatus; /* lsb: 0=> present, 1=> absent */
- u16 cableStatus; /* lsb: 0=> present, 1=> absent */
+ u16 txDescrIndex[FST_MAX_PORTS]; /* transmit descriptor ring index */
+ u16 rxDescrIndex[FST_MAX_PORTS]; /* receive descriptor ring index */
- u16 txDescrIndex[FST_MAX_PORTS]; /* transmit descriptor ring index */
- u16 rxDescrIndex[FST_MAX_PORTS]; /* receive descriptor ring index */
+ u16 portMailbox[FST_MAX_PORTS][2]; /* command, modifier */
+ u16 cardMailbox[4]; /* Not used */
- u16 portMailbox[FST_MAX_PORTS][2]; /* command, modifier */
- u16 cardMailbox[4]; /* Not used */
+ /* Number of times the card thinks the host has
+ * missed an interrupt by not acknowledging
+ * within 2mS (I guess NT has problems)
+ */
+ u32 interruptRetryCount;
- /* Number of times that card thinks the host has
- * missed an interrupt by not acknowledging
- * within 2mS (I guess NT has problems)
- */
- u32 interruptRetryCount;
+ /* Driver private data used as an ID. We'll not
+ * use this as I'd rather keep such things
+ * in main memory rather than on the PCI bus
+ */
+ u32 portHandle[FST_MAX_PORTS];
- /* Driver private data used as an ID. We'll not
- * use this on Linux I'd rather keep such things
- * in main memory rather than on the PCI bus
- */
- u32 portHandle[FST_MAX_PORTS];
+ /* Count of Tx underflows for stats */
+ u32 transmitBufferUnderflow[FST_MAX_PORTS];
- /* Count of Tx underflows for stats */
- u32 transmitBufferUnderflow[FST_MAX_PORTS];
+ /* Debounced V.24 control input status */
+ u32 v24DebouncedSts[FST_MAX_PORTS];
- /* Debounced V.24 control input status */
- u32 v24DebouncedSts[FST_MAX_PORTS];
+ /* Adapter debounce timers. Don't touch */
+ u32 ctsTimer[FST_MAX_PORTS];
+ u32 ctsTimerRun[FST_MAX_PORTS];
+ u32 dcdTimer[FST_MAX_PORTS];
+ u32 dcdTimerRun[FST_MAX_PORTS];
- /* Adapter debounce timers. Don't touch */
- u32 ctsTimer[FST_MAX_PORTS];
- u32 ctsTimerRun[FST_MAX_PORTS];
- u32 dcdTimer[FST_MAX_PORTS];
- u32 dcdTimerRun[FST_MAX_PORTS];
+ u32 numberOfPorts; /* Number of ports detected at startup */
- u32 numberOfPorts; /* Number of ports detected at startup */
+ u16 _reserved[64];
- u16 _reserved[64];
+ u16 cardMode; /* Bit-mask to enable features:
+ * Bit 0: 1 enables LED identify mode
+ */
- u16 cardMode; /* Bit-mask to enable features:
- * Bit 0: 1 enables LED identify mode
- */
+ u16 portScheduleOffset;
- u16 portScheduleOffset;
+ struct su_config suConfig; /* TE1 Bits */
+ struct su_status suStatus;
- u32 endOfSmcSignature; /* endOfSmcSignature MUST be the last member of
- * the structure and marks the end of the shared
- * memory. Adapter code initializes its value as
- * END_SIG.
- */
+ u32 endOfSmcSignature; /* endOfSmcSignature MUST be the last member of
+ * the structure and marks the end of shared
+ * memory. Adapter code initializes it as
+ * END_SIG.
+ */
};
/* endOfSmcSignature value */
#define END_SIG 0x12345678
/* Mailbox values. (portMailbox) */
-#define NOP 0 /* No operation */
-#define ACK 1 /* Positive acknowledgement to PC driver */
-#define NAK 2 /* Negative acknowledgement to PC driver */
-#define STARTPORT 3 /* Start an HDLC port */
-#define STOPPORT 4 /* Stop an HDLC port */
-#define ABORTTX 5 /* Abort the transmitter for a port */
-#define SETV24O 6 /* Set V24 outputs */
+#define NOP 0 /* No operation */
+#define ACK 1 /* Positive acknowledgement to PC driver */
+#define NAK 2 /* Negative acknowledgement to PC driver */
+#define STARTPORT 3 /* Start an HDLC port */
+#define STOPPORT 4 /* Stop an HDLC port */
+#define ABORTTX 5 /* Abort the transmitter for a port */
+#define SETV24O 6 /* Set V24 outputs */
+
+/* PLX Chip Register Offsets */
+#define CNTRL_9052 0x50 /* Control Register */
+#define CNTRL_9054 0x6c /* Control Register */
+#define INTCSR_9052 0x4c /* Interrupt control/status register */
+#define INTCSR_9054 0x68 /* Interrupt control/status register */
+
+/* 9054 DMA Registers */
+/*
+ * Note that we will be using DMA Channel 0 for copying rx data
+ * and Channel 1 for copying tx data
+ */
+#define DMAMODE0 0x80
+#define DMAPADR0 0x84
+#define DMALADR0 0x88
+#define DMASIZ0 0x8c
+#define DMADPR0 0x90
+#define DMAMODE1 0x94
+#define DMAPADR1 0x98
+#define DMALADR1 0x9c
+#define DMASIZ1 0xa0
+#define DMADPR1 0xa4
+#define DMACSR0 0xa8
+#define DMACSR1 0xa9
+#define DMAARB 0xac
+#define DMATHR 0xb0
+#define DMADAC0 0xb4
+#define DMADAC1 0xb8
+#define DMAMARBR 0xac
+
+#define FST_MIN_DMA_LEN 64
+#define FST_RX_DMA_INT 0x01
+#define FST_TX_DMA_INT 0x02
+#define FST_CARD_INT 0x04
/* Larger buffers are positioned in memory at offset BFM_BASE */
struct buf_window {
- u8 txBuffer[FST_MAX_PORTS][NUM_TX_BUFFER][LEN_TX_BUFFER];
- u8 rxBuffer[FST_MAX_PORTS][NUM_RX_BUFFER][LEN_RX_BUFFER];
+ u8 txBuffer[FST_MAX_PORTS][NUM_TX_BUFFER][LEN_TX_BUFFER];
+ u8 rxBuffer[FST_MAX_PORTS][NUM_RX_BUFFER][LEN_RX_BUFFER];
};
/* Calculate offset of a buffer object within the shared memory window */
@@ -324,39 +417,64 @@
#pragma pack()
-
/* Device driver private information
* =================================
*/
/* Per port (line or channel) information
*/
struct fst_port_info {
- hdlc_device hdlc; /* HDLC device struct - must be first */
- struct fst_card_info *card; /* Card we're associated with */
- int index; /* Port index on the card */
- int hwif; /* Line hardware (lineInterface copy) */
- int run; /* Port is running */
- int rxpos; /* Next Rx buffer to use */
- int txpos; /* Next Tx buffer to use */
- int txipos; /* Next Tx buffer to check for free */
- int txcnt; /* Count of Tx buffers in use */
+ hdlc_device hdlc; /* HDLC device struct - must be first */
+ struct fst_card_info *card; /* Card we're associated with */
+ int index; /* Port index on the card */
+ int hwif; /* Line hardware (lineInterface copy) */
+ int run; /* Port is running */
+ int mode; /* Normal or FarSync raw */
+ int rxpos; /* Next Rx buffer to use */
+ int txpos; /* Next Tx buffer to use */
+ int txipos; /* Next Tx buffer to check for free */
+ int start; /* Indication of start/stop to network */
+ /*
+ * A sixteen entry transmit queue
+ */
+ int txqs; /* index to get next buffer to tx */
+ int txqe; /* index to queue next packet */
+ struct sk_buff *txq[FST_TXQ_DEPTH]; /* The queue */
+ int rxqdepth;
};
/* Per card information
*/
struct fst_card_info {
- char *mem; /* Card memory mapped to kernel space */
- char *ctlmem; /* Control memory for PCI cards */
- unsigned int phys_mem; /* Physical memory window address */
- unsigned int phys_ctlmem; /* Physical control memory address */
- unsigned int irq; /* Interrupt request line number */
- unsigned int nports; /* Number of serial ports */
- unsigned int type; /* Type index of card */
- unsigned int state; /* State of card */
- spinlock_t card_lock; /* Lock for SMP access */
- unsigned short pci_conf; /* PCI card config in I/O space */
- /* Per port info */
- struct fst_port_info ports[ FST_MAX_PORTS ];
+ char *mem; /* Card memory mapped to kernel space */
+ char *ctlmem; /* Control memory for PCI cards */
+ unsigned int phys_mem; /* Physical memory window address */
+ unsigned int phys_ctlmem; /* Physical control memory address */
+ unsigned int irq; /* Interrupt request line number */
+ unsigned int nports; /* Number of serial ports */
+ unsigned int type; /* Type index of card */
+ unsigned int state; /* State of card */
+ spinlock_t card_lock; /* Lock for SMP access */
+ unsigned short pci_conf; /* PCI card config in I/O space */
+ /* Per port info */
+ struct fst_port_info ports[FST_MAX_PORTS];
+ struct pci_dev *device; /* Information about the pci device */
+ int card_no; /* Inst of the card on the system */
+ int family; /* TxP or TxU */
+ int dmarx_in_progress;
+ int dmatx_in_progress;
+ unsigned long int_count;
+ unsigned long int_time_ave;
+ void *rx_dma_handle_host;
+ dma_addr_t rx_dma_handle_card;
+ void *tx_dma_handle_host;
+ dma_addr_t tx_dma_handle_card;
+ struct sk_buff *dma_skb_rx;
+ struct fst_port_info *dma_port_rx;
+ struct fst_port_info *dma_port_tx;
+ int dma_len_rx;
+ int dma_len_tx;
+ int dma_txpos;
+ int dma_rxpos;
};
/* Convert an HDLC device pointer into a port info pointer and similar */
@@ -364,7 +482,6 @@
#define dev_to_port(D) hdlc_to_port(dev_to_hdlc(D))
#define port_to_dev(P) hdlc_to_dev(&(P)->hdlc)
-
/*
* Shared memory window access macros
*
@@ -384,7 +501,6 @@
#define FST_WRW(C,E,W) writew ((W), (C)->mem + WIN_OFFSET(E))
#define FST_WRL(C,E,L) writel ((L), (C)->mem + WIN_OFFSET(E))
-
/*
* Debug support
*/
@@ -403,30 +519,148 @@
printk ( KERN_DEBUG FST_NAME ": " fmt, ## A )
#else
-# define dbg(X...) /* NOP */
+#define dbg(X...) /* NOP */
#endif
-
/* Printing short cuts
*/
#define printk_err(fmt,A...) printk ( KERN_ERR FST_NAME ": " fmt, ## A )
#define printk_warn(fmt,A...) printk ( KERN_WARNING FST_NAME ": " fmt, ## A )
#define printk_info(fmt,A...) printk ( KERN_INFO FST_NAME ": " fmt, ## A )
-
/*
* PCI ID lookup table
*/
static struct pci_device_id fst_pci_dev_id[] __devinitdata = {
- { FSC_PCI_VENDOR_ID, T2P_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- FST_TYPE_T2P },
- { FSC_PCI_VENDOR_ID, T4P_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- FST_TYPE_T4P },
- { 0, } /* End */
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T2P},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T4P},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T1U},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T2U},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_T4U},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_TE1},
+
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, FST_TYPE_TE1},
+ {0,} /* End */
};
-MODULE_DEVICE_TABLE ( pci, fst_pci_dev_id );
+MODULE_DEVICE_TABLE(pci, fst_pci_dev_id);
+
+/*
+ * Device Driver Work Queues
+ *
+ * So that we don't spend too much time processing events in the
+ * Interrupt Service routine, we will declare a work queue per Card
+ * and make the ISR schedule a task in the queue for later execution.
+ */
+
+static void do_bottom_half_tx(struct fst_card_info *card);
+static void do_bottom_half_rx(struct fst_card_info *card);
+static void fst_process_tx_work_q(unsigned long work_q);
+static void fst_process_int_work_q(unsigned long work_q);
+
+DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0);
+DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0);
+
+struct fst_card_info *fst_card_array[FST_MAX_CARDS];
+spinlock_t fst_work_q_lock;
+u64 fst_work_txq;
+u64 fst_work_intq;
+
+static void
+fst_q_work_item(u64 * queue, int card_index)
+{
+ unsigned long flags;
+ u64 mask;
+ /*
+ * Grab the queue exclusively
+ */
+ spin_lock_irqsave(&fst_work_q_lock, flags);
+
+ /*
+ * Making an entry in the queue is simply a matter of setting
+ * a bit for the card indicating that there is work to do in the
+ * bottom half for the card. Note the limitation of 64 cards.
+ * That ought to be enough
+ */
+ mask = 1 << card_index;
+ *queue |= mask;
+ spin_unlock_irqrestore(&fst_work_q_lock, flags);
+}
+
+static void
+fst_process_tx_work_q(unsigned long work_q)
+{
+ unsigned long flags;
+ u64 work_txq;
+ int i;
+
+ /*
+ * Grab the queue exclusively
+ */
+ dbg(DBG_TX, "fst_process_tx_work_q\n");
+ spin_lock_irqsave(&fst_work_q_lock, flags);
+ work_txq = fst_work_txq;
+ fst_work_txq = 0;
+ spin_unlock_irqrestore(&fst_work_q_lock, flags);
+
+ /*
+ * Call the bottom half for each card with work waiting
+ */
+ for (i = 0; i < FST_MAX_CARDS; i++) {
+ if (work_txq & 0x01) {
+ if (fst_card_array[i] != NULL) {
+ dbg(DBG_TX, "Calling tx bh for card %d\n", i);
+ do_bottom_half_tx(fst_card_array[i]);
+ }
+ }
+ work_txq = work_txq >> 1;
+ }
+}
+
+static void
+fst_process_int_work_q(unsigned long work_q)
+{
+ unsigned long flags;
+ u64 work_intq;
+ int i;
+
+ /*
+ * Grab the queue exclusively
+ */
+ dbg(DBG_INTR, "fst_process_int_work_q\n");
+ spin_lock_irqsave(&fst_work_q_lock, flags);
+ work_intq = fst_work_intq;
+ fst_work_intq = 0;
+ spin_unlock_irqrestore(&fst_work_q_lock, flags);
+
+ /*
+ * Call the bottom half for each card with work waiting
+ */
+ for (i = 0; i < FST_MAX_CARDS; i++) {
+ if (work_intq & 0x01) {
+ if (fst_card_array[i] != NULL) {
+ dbg(DBG_INTR,
+ "Calling rx & tx bh for card %d\n", i);
+ do_bottom_half_rx(fst_card_array[i]);
+ do_bottom_half_tx(fst_card_array[i]);
+ }
+ }
+ work_intq = work_intq >> 1;
+ }
+}
/* Card control functions
* ======================
@@ -436,1002 +670,1709 @@
* Used to be a simple write to card control space but a glitch in the latest
* AMD Am186CH processor means that we now have to do it by asserting and de-
* asserting the PLX chip PCI Adapter Software Reset. Bit 30 in CNTRL register
- * at offset 0x50.
+ * at offset 9052_CNTRL. Note the updates for the TXU.
*/
static inline void
-fst_cpureset ( struct fst_card_info *card )
+fst_cpureset(struct fst_card_info *card)
{
- unsigned int regval;
+ unsigned char interrupt_line_register;
+ unsigned long j = jiffies + 1;
+ unsigned int regval;
+
+ if (card->family == FST_FAMILY_TXU) {
+ if (pci_read_config_byte
+ (card->device, PCI_INTERRUPT_LINE, &interrupt_line_register)) {
+ dbg(DBG_ASS,
+ "Error in reading interrupt line register\n");
+ }
+ /*
+ * Assert PLX software reset and Am186 hardware reset
+ * and then deassert the PLX software reset but 186 still in reset
+ */
+ outw(0x440f, card->pci_conf + CNTRL_9054 + 2);
+ outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
+ /*
+ * We are delaying here to allow the 9054 to reset itself
+ */
+ j = jiffies + 1;
+ while (jiffies < j)
+ /* Do nothing */ ;
+ outw(0x240f, card->pci_conf + CNTRL_9054 + 2);
+ /*
+ * We are delaying here to allow the 9054 to reload its eeprom
+ */
+ j = jiffies + 1;
+ while (jiffies < j)
+ /* Do nothing */ ;
+ outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
+
+ if (pci_write_config_byte
+ (card->device, PCI_INTERRUPT_LINE, interrupt_line_register)) {
+ dbg(DBG_ASS,
+ "Error in writing interrupt line register\n");
+ }
- regval = inl ( card->pci_conf + 0x50 );
+ } else {
+ regval = inl(card->pci_conf + CNTRL_9052);
- outl ( regval | 0x40000000, card->pci_conf + 0x50 );
- outl ( regval & ~0x40000000, card->pci_conf + 0x50 );
+ outl(regval | 0x40000000, card->pci_conf + CNTRL_9052);
+ outl(regval & ~0x40000000, card->pci_conf + CNTRL_9052);
+ }
}
/* Release the processor from reset
*/
static inline void
-fst_cpurelease ( struct fst_card_info *card )
+fst_cpurelease(struct fst_card_info *card)
{
- (void) readb ( card->ctlmem );
+ if (card->family == FST_FAMILY_TXU) {
+ /*
+ * Force posted writes to complete
+ */
+ (void) readb(card->mem);
+
+ /*
+ * Release LRESET DO = 1
+ * Then release Local Hold, DO = 1
+ */
+ outw(0x040e, card->pci_conf + CNTRL_9054 + 2);
+ outw(0x040f, card->pci_conf + CNTRL_9054 + 2);
+ } else {
+ (void) readb(card->ctlmem);
+ }
}
/* Clear the cards interrupt flag
*/
static inline void
-fst_clear_intr ( struct fst_card_info *card )
+fst_clear_intr(struct fst_card_info *card)
{
- /* Poke the appropriate PLX chip register (same as enabling interrupts)
- */
- outw ( 0x0543, card->pci_conf + 0x4C );
+ if (card->family == FST_FAMILY_TXU) {
+ (void) readb(card->ctlmem);
+ } else {
+ /* Poke the appropriate PLX chip register (same as enabling interrupts)
+ */
+ outw(0x0543, card->pci_conf + INTCSR_9052);
+ }
+}
+
+/* Enable card interrupts
+ */
+static inline void
+fst_enable_intr(struct fst_card_info *card)
+{
+ if (card->family == FST_FAMILY_TXU) {
+ outl(0x0f0c0900, card->pci_conf + INTCSR_9054);
+ } else {
+ outw(0x0543, card->pci_conf + INTCSR_9052);
+ }
}
/* Disable card interrupts
*/
static inline void
-fst_disable_intr ( struct fst_card_info *card )
+fst_disable_intr(struct fst_card_info *card)
{
- outw ( 0x0000, card->pci_conf + 0x4C );
+ if (card->family == FST_FAMILY_TXU) {
+ outl(0x00000000, card->pci_conf + INTCSR_9054);
+ } else {
+ outw(0x0000, card->pci_conf + INTCSR_9052);
+ }
}
+/* Process the result of trying to pass a recieved frame up the stack
+ */
+static void
+fst_process_rx_status(int rx_status, char *name)
+{
+ switch (rx_status) {
+ case NET_RX_SUCCESS:
+ {
+ /*
+ * Nothing to do here
+ */
+ break;
+ }
+
+ case NET_RX_CN_LOW:
+ {
+ dbg(DBG_ASS, "%s: Receive Low Congestion\n", name);
+ break;
+ }
+
+ case NET_RX_CN_MOD:
+ {
+ dbg(DBG_ASS, "%s: Receive Moderate Congestion\n", name);
+ break;
+ }
+
+ case NET_RX_CN_HIGH:
+ {
+ dbg(DBG_ASS, "%s: Receive High Congestion\n", name);
+ break;
+ }
+
+ case NET_RX_DROP:
+ {
+ dbg(DBG_ASS, "%s: Received packet dropped\n", name);
+ break;
+ }
+ }
+}
+
+/* Initilaise DMA for PLX 9054
+ */
+static inline void
+fst_init_dma(struct fst_card_info *card)
+{
+ /*
+ * This is only required for the PLX 9054
+ */
+ if (card->family == FST_FAMILY_TXU) {
+ pci_set_master(card->device);
+ outl(0x00020441, card->pci_conf + DMAMODE0);
+ outl(0x00020441, card->pci_conf + DMAMODE1);
+ outl(0x0, card->pci_conf + DMATHR);
+ }
+}
+
+/* Tx dma complete interrupt
+ */
+static void
+fst_tx_dma_complete(struct fst_card_info *card, struct fst_port_info *port,
+ int len, int txpos)
+{
+ /*
+ * Everything is now set, just tell the card to go
+ */
+ dbg(DBG_TX, "fst_tx_dma_complete\n");
+ FST_WRB(card, txDescrRing[port->index][txpos].bits,
+ DMA_OWN | TX_STP | TX_ENP);
+ port->hdlc.stats.tx_packets++;
+ port->hdlc.stats.tx_bytes += len;
+ port_to_dev(port)->trans_start = jiffies;
+}
+
+/* Rx dma complete interrupt
+ */
+static void
+fst_rx_dma_complete(struct fst_card_info *card, struct fst_port_info *port,
+ int len, struct sk_buff *skb, int rxp)
+{
+
+ int pi;
+ int rx_status;
+
+ dbg(DBG_TX, "fst_rx_dma_complete\n");
+ pi = port->index;
+ memcpy(skb_put(skb, len), card->rx_dma_handle_host, len);
+
+ /* Reset buffer descriptor */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ /* Update stats */
+ port->hdlc.stats.rx_packets++;
+ port->hdlc.stats.rx_bytes += len;
+
+ /* Push upstream */
+ dbg(DBG_RX, "Pushing the frame up the stack\n");
+ skb->mac.raw = skb->data;
+ skb->dev = hdlc_to_dev(&port->hdlc);
+ if (port->mode == FST_RAW) {
+ /*
+ * Mark it for our own raw sockets interface
+ */
+ skb->protocol = htons(ETH_P_CUST);
+ skb->pkt_type = PACKET_HOST;
+ } else {
+ skb->protocol = hdlc_type_trans(skb, skb->dev);
+ }
+ rx_status = netif_rx(skb);
+ fst_process_rx_status(rx_status, port_to_dev(port)->name);
+ if (rx_status == NET_RX_DROP)
+ port->hdlc.stats.rx_dropped++;
+ port_to_dev(port)->last_rx = jiffies;
+}
+
+/*
+ * Receive a frame through the DMA
+ */
+static inline void
+fst_rx_dma(struct fst_card_info *card, unsigned char *skb,
+ unsigned char *mem, int len)
+{
+ /*
+ * This routine will setup the DMA and start it
+ */
+
+ dbg(DBG_RX, "In fst_rx_dma %p %p %d\n", skb, mem, len);
+ if (card->dmarx_in_progress) {
+ dbg(DBG_ASS, "In fst_rx_dma while dma in progress\n");
+ }
+
+ outl((unsigned long) skb, card->pci_conf + DMAPADR0); /* Copy to here */
+ outl((unsigned long) mem, card->pci_conf + DMALADR0); /* from here */
+ outl(len, card->pci_conf + DMASIZ0); /* for this length */
+ outl(0x00000000c, card->pci_conf + DMADPR0); /* In this direction */
+
+ /*
+ * We use the dmarx_in_progress flag to flag the channel as busy
+ */
+ card->dmarx_in_progress = 1;
+ outb(0x03, card->pci_conf + DMACSR0); /* Start the transfer */
+}
+
+/*
+ * Send a frame through the DMA
+ */
+static inline void
+fst_tx_dma(struct fst_card_info *card, unsigned char *skb,
+ unsigned char *mem, int len)
+{
+ /*
+ * This routine will setup the DMA and start it.
+ */
+
+ dbg(DBG_TX, "In fst_tx_dma %p %p %d\n", skb, mem, len);
+ if (card->dmatx_in_progress) {
+ dbg(DBG_ASS, "In fst_tx_dma while dma in progress\n");
+ }
+
+ outl((unsigned long) skb, card->pci_conf + DMAPADR1); /* Copy from here */
+ outl((unsigned long) mem, card->pci_conf + DMALADR1); /* to here */
+ outl(len, card->pci_conf + DMASIZ1); /* for this length */
+ outl(0x000000004, card->pci_conf + DMADPR1); /* In this direction */
+
+ /*
+ * We use the dmatx_in_progress to flag the channel as busy
+ */
+ card->dmatx_in_progress = 1;
+ outb(0x03, card->pci_conf + DMACSR1); /* Start the transfer */
+}
/* Issue a Mailbox command for a port.
* Note we issue them on a fire and forget basis, not expecting to see an
* error and not waiting for completion.
*/
static void
-fst_issue_cmd ( struct fst_port_info *port, unsigned short cmd )
+fst_issue_cmd(struct fst_port_info *port, unsigned short cmd)
{
- struct fst_card_info *card;
- unsigned short mbval;
- unsigned long flags;
- int safety;
-
- card = port->card;
- spin_lock_irqsave ( &card->card_lock, flags );
- mbval = FST_RDW ( card, portMailbox[port->index][0]);
-
- safety = 0;
- /* Wait for any previous command to complete */
- while ( mbval > NAK )
- {
- spin_unlock_irqrestore ( &card->card_lock, flags );
- schedule_timeout ( 1 );
- spin_lock_irqsave ( &card->card_lock, flags );
-
- if ( ++safety > 1000 )
- {
- printk_err ("Mailbox safety timeout\n");
- break;
- }
-
- mbval = FST_RDW ( card, portMailbox[port->index][0]);
- }
- if ( safety > 0 )
- {
- dbg ( DBG_CMD,"Mailbox clear after %d jiffies\n", safety );
- }
- if ( mbval == NAK )
- {
- dbg ( DBG_CMD,"issue_cmd: previous command was NAK'd\n");
- }
-
- FST_WRW ( card, portMailbox[port->index][0], cmd );
-
- if ( cmd == ABORTTX || cmd == STARTPORT )
- {
- port->txpos = 0;
- port->txipos = 0;
- port->txcnt = 0;
- }
+ struct fst_card_info *card;
+ unsigned short mbval;
+ unsigned long flags;
+ int safety;
+
+ card = port->card;
+ spin_lock_irqsave(&card->card_lock, flags);
+ mbval = FST_RDW(card, portMailbox[port->index][0]);
+
+ safety = 0;
+ /* Wait for any previous command to complete */
+ while (mbval > NAK) {
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ schedule_timeout(1);
+ spin_lock_irqsave(&card->card_lock, flags);
+
+ if (++safety > 2000) {
+ printk_err("Mailbox safety timeout\n");
+ break;
+ }
- spin_unlock_irqrestore ( &card->card_lock, flags );
-}
+ mbval = FST_RDW(card, portMailbox[port->index][0]);
+ }
+ if (safety > 0) {
+ dbg(DBG_CMD, "Mailbox clear after %d jiffies\n", safety);
+ }
+ if (mbval == NAK) {
+ dbg(DBG_CMD, "issue_cmd: previous command was NAK'd\n");
+ }
+
+ FST_WRW(card, portMailbox[port->index][0], cmd);
+ if (cmd == ABORTTX || cmd == STARTPORT) {
+ port->txpos = 0;
+ port->txipos = 0;
+ port->start = 0;
+ }
+
+ spin_unlock_irqrestore(&card->card_lock, flags);
+}
/* Port output signals control
*/
static inline void
-fst_op_raise ( struct fst_port_info *port, unsigned int outputs )
+fst_op_raise(struct fst_port_info *port, unsigned int outputs)
{
- outputs |= FST_RDL ( port->card, v24OpSts[port->index]);
- FST_WRL ( port->card, v24OpSts[port->index], outputs );
+ outputs |= FST_RDL(port->card, v24OpSts[port->index]);
+ FST_WRL(port->card, v24OpSts[port->index], outputs);
- if ( port->run )
- fst_issue_cmd ( port, SETV24O );
+ if (port->run)
+ fst_issue_cmd(port, SETV24O);
}
static inline void
-fst_op_lower ( struct fst_port_info *port, unsigned int outputs )
+fst_op_lower(struct fst_port_info *port, unsigned int outputs)
{
- outputs = ~outputs & FST_RDL ( port->card, v24OpSts[port->index]);
- FST_WRL ( port->card, v24OpSts[port->index], outputs );
+ outputs = ~outputs & FST_RDL(port->card, v24OpSts[port->index]);
+ FST_WRL(port->card, v24OpSts[port->index], outputs);
- if ( port->run )
- fst_issue_cmd ( port, SETV24O );
+ if (port->run)
+ fst_issue_cmd(port, SETV24O);
}
-
/*
* Setup port Rx buffers
*/
static void
-fst_rx_config ( struct fst_port_info *port )
+fst_rx_config(struct fst_port_info *port)
{
- int i;
- int pi;
- unsigned int offset;
- unsigned long flags;
- struct fst_card_info *card;
-
- pi = port->index;
- card = port->card;
- spin_lock_irqsave ( &card->card_lock, flags );
- for ( i = 0 ; i < NUM_RX_BUFFER ; i++ )
- {
- offset = BUF_OFFSET ( rxBuffer[pi][i][0]);
-
- FST_WRW ( card, rxDescrRing[pi][i].ladr, (u16) offset );
- FST_WRB ( card, rxDescrRing[pi][i].hadr, (u8)( offset >> 16 ));
- FST_WRW ( card, rxDescrRing[pi][i].bcnt,
- cnv_bcnt ( LEN_RX_BUFFER ));
- FST_WRW ( card, rxDescrRing[pi][i].mcnt, 0 );
- FST_WRB ( card, rxDescrRing[pi][i].bits, DMA_OWN );
- }
- port->rxpos = 0;
- spin_unlock_irqrestore ( &card->card_lock, flags );
+ int i;
+ int pi;
+ unsigned int offset;
+ unsigned long flags;
+ struct fst_card_info *card;
+
+ pi = port->index;
+ card = port->card;
+ spin_lock_irqsave(&card->card_lock, flags);
+ for (i = 0; i < NUM_RX_BUFFER; i++) {
+ offset = BUF_OFFSET(rxBuffer[pi][i][0]);
+
+ FST_WRW(card, rxDescrRing[pi][i].ladr, (u16) offset);
+ FST_WRB(card, rxDescrRing[pi][i].hadr, (u8) (offset >> 16));
+ FST_WRW(card, rxDescrRing[pi][i].bcnt, cnv_bcnt(LEN_RX_BUFFER));
+ FST_WRW(card, rxDescrRing[pi][i].mcnt, LEN_RX_BUFFER);
+ FST_WRB(card, rxDescrRing[pi][i].bits, DMA_OWN);
+ }
+ port->rxpos = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
}
-
/*
* Setup port Tx buffers
*/
static void
-fst_tx_config ( struct fst_port_info *port )
+fst_tx_config(struct fst_port_info *port)
{
- int i;
- int pi;
- unsigned int offset;
- unsigned long flags;
- struct fst_card_info *card;
-
- pi = port->index;
- card = port->card;
- spin_lock_irqsave ( &card->card_lock, flags );
- for ( i = 0 ; i < NUM_TX_BUFFER ; i++ )
- {
- offset = BUF_OFFSET ( txBuffer[pi][i][0]);
-
- FST_WRW ( card, txDescrRing[pi][i].ladr, (u16) offset );
- FST_WRB ( card, txDescrRing[pi][i].hadr, (u8)( offset >> 16 ));
- FST_WRW ( card, txDescrRing[pi][i].bcnt, 0 );
- FST_WRB ( card, txDescrRing[pi][i].bits, 0 );
- }
- port->txpos = 0;
- port->txipos = 0;
- port->txcnt = 0;
- spin_unlock_irqrestore ( &card->card_lock, flags );
+ int i;
+ int pi;
+ unsigned int offset;
+ unsigned long flags;
+ struct fst_card_info *card;
+
+ pi = port->index;
+ card = port->card;
+ spin_lock_irqsave(&card->card_lock, flags);
+ for (i = 0; i < NUM_TX_BUFFER; i++) {
+ offset = BUF_OFFSET(txBuffer[pi][i][0]);
+
+ FST_WRW(card, txDescrRing[pi][i].ladr, (u16) offset);
+ FST_WRB(card, txDescrRing[pi][i].hadr, (u8) (offset >> 16));
+ FST_WRW(card, txDescrRing[pi][i].bcnt, 0);
+ FST_WRB(card, txDescrRing[pi][i].bits, 0);
+ }
+ port->txpos = 0;
+ port->txipos = 0;
+ port->start = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
}
+/* TE1 Alarm change interrupt event
+ */
+static void
+fst_intr_te1_alarm(struct fst_card_info *card, struct fst_port_info *port)
+{
+ u8 los;
+ u8 rra;
+ u8 ais;
+
+ los = FST_RDB(card, suStatus.lossOfSignal);
+ rra = FST_RDB(card, suStatus.receiveRemoteAlarm);
+ ais = FST_RDB(card, suStatus.alarmIndicationSignal);
+
+ if (los) {
+ /*
+ * Lost the link
+ */
+ if (netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "Net carrier off\n");
+ netif_carrier_off(port_to_dev(port));
+ }
+ } else {
+ /*
+ * Link available
+ */
+ if (!netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "Net carrier on\n");
+ netif_carrier_on(port_to_dev(port));
+ }
+ }
+
+ if (los)
+ dbg(DBG_INTR, "Assert LOS Alarm\n");
+ else
+ dbg(DBG_INTR, "De-assert LOS Alarm\n");
+ if (rra)
+ dbg(DBG_INTR, "Assert RRA Alarm\n");
+ else
+ dbg(DBG_INTR, "De-assert RRA Alarm\n");
+
+ if (ais)
+ dbg(DBG_INTR, "Assert AIS Alarm\n");
+ else
+ dbg(DBG_INTR, "De-assert AIS Alarm\n");
+}
/* Control signal change interrupt event
*/
static void
-fst_intr_ctlchg ( struct fst_card_info *card, struct fst_port_info *port )
+fst_intr_ctlchg(struct fst_card_info *card, struct fst_port_info *port)
{
- int signals;
+ int signals;
+
+ signals = FST_RDL(card, v24DebouncedSts[port->index]);
- signals = FST_RDL ( card, v24DebouncedSts[port->index]);
+ if (signals & (((port->hwif == X21) || (port->hwif == X21D))
+ ? IPSTS_INDICATE : IPSTS_DCD)) {
+ if (!netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "DCD active\n");
+ netif_carrier_on(port_to_dev(port));
+ }
+ } else {
+ if (netif_carrier_ok(port_to_dev(port))) {
+ dbg(DBG_INTR, "DCD lost\n");
+ netif_carrier_off(port_to_dev(port));
+ }
+ }
+}
- if ( signals & (( port->hwif == X21 ) ? IPSTS_INDICATE : IPSTS_DCD ))
- {
- if ( ! netif_carrier_ok ( port_to_dev ( port )))
- {
- dbg ( DBG_INTR,"DCD active\n");
- netif_carrier_on ( port_to_dev ( port ));
- }
- }
- else
- {
- if ( netif_carrier_ok ( port_to_dev ( port )))
- {
- dbg ( DBG_INTR,"DCD lost\n");
- netif_carrier_off ( port_to_dev ( port ));
- }
- }
+/* Log Rx Errors
+ */
+static void
+fst_log_rx_error(struct fst_card_info *card, struct fst_port_info *port,
+ unsigned char dmabits, int rxp, unsigned short len)
+{
+ /*
+ * Increment the appropriate error counter
+ */
+ port->hdlc.stats.rx_errors++;
+ if (dmabits & RX_OFLO) {
+ port->hdlc.stats.rx_fifo_errors++;
+ dbg(DBG_ASS, "Rx fifo error on card %d port %d buffer %d\n",
+ card->card_no, port->index, rxp);
+ }
+ if (dmabits & RX_CRC) {
+ port->hdlc.stats.rx_crc_errors++;
+ dbg(DBG_ASS, "Rx crc error on card %d port %d\n",
+ card->card_no, port->index);
+ }
+ if (dmabits & RX_FRAM) {
+ port->hdlc.stats.rx_frame_errors++;
+ dbg(DBG_ASS, "Rx frame error on card %d port %d\n",
+ card->card_no, port->index);
+ }
+ if (dmabits == (RX_STP | RX_ENP)) {
+ port->hdlc.stats.rx_length_errors++;
+ dbg(DBG_ASS, "Rx length error (%d) on card %d port %d\n",
+ len, card->card_no, port->index);
+ }
}
+/* Rx Error Recovery
+ */
+static void
+fst_recover_rx_error(struct fst_card_info *card, struct fst_port_info *port,
+ unsigned char dmabits, int rxp, unsigned short len)
+{
+ int i;
+ int pi;
+
+ pi = port->index;
+ /*
+ * Discard buffer descriptors until we see the start of the
+ * next frame. Note that for long frames this could be in
+ * a subsequent interrupt.
+ */
+ i = 0;
+ while ((dmabits & (DMA_OWN | RX_STP)) == 0) {
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+ rxp = (rxp+1) % NUM_RX_BUFFER;
+ if (++i > NUM_RX_BUFFER) {
+ dbg(DBG_ASS, "intr_rx: Discarding more bufs"
+ " than we have\n");
+ break;
+ }
+ dmabits = FST_RDB(card, rxDescrRing[pi][rxp].bits);
+ dbg(DBG_ASS, "DMA Bits of next buffer was %x\n", dmabits);
+ }
+ dbg(DBG_ASS, "There were %d subsequent buffers in error\n", i);
+
+ /* Discard the terminal buffer */
+ if (!(dmabits & DMA_OWN)) {
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+ rxp = (rxp+1) % NUM_RX_BUFFER;
+ }
+ port->rxpos = rxp;
+ return;
+
+}
/* Rx complete interrupt
*/
static void
-fst_intr_rx ( struct fst_card_info *card, struct fst_port_info *port )
+fst_intr_rx(struct fst_card_info *card, struct fst_port_info *port)
{
- unsigned char dmabits;
- int pi;
- int rxp;
- unsigned short len;
- struct sk_buff *skb;
- int i;
-
-
- /* Check we have a buffer to process */
- pi = port->index;
- rxp = port->rxpos;
- dmabits = FST_RDB ( card, rxDescrRing[pi][rxp].bits );
- if ( dmabits & DMA_OWN )
- {
- dbg ( DBG_RX | DBG_INTR,"intr_rx: No buffer port %d pos %d\n",
- pi, rxp );
- return;
- }
-
- /* Get buffer length */
- len = FST_RDW ( card, rxDescrRing[pi][rxp].mcnt );
- /* Discard the CRC */
- len -= 2;
-
- /* Check buffer length and for other errors. We insist on one packet
- * in one buffer. This simplifies things greatly and since we've
- * allocated 8K it shouldn't be a real world limitation
- */
- dbg ( DBG_RX,"intr_rx: %d,%d: flags %x len %d\n", pi, rxp, dmabits,
- len );
- if ( dmabits != ( RX_STP | RX_ENP ) || len > LEN_RX_BUFFER - 2 )
- {
- port->hdlc.stats.rx_errors++;
-
- /* Update error stats and discard buffer */
- if ( dmabits & RX_OFLO )
- {
- port->hdlc.stats.rx_fifo_errors++;
- }
- if ( dmabits & RX_CRC )
- {
- port->hdlc.stats.rx_crc_errors++;
- }
- if ( dmabits & RX_FRAM )
- {
- port->hdlc.stats.rx_frame_errors++;
- }
- if ( dmabits == ( RX_STP | RX_ENP ))
- {
- port->hdlc.stats.rx_length_errors++;
- }
-
- /* Discard buffer descriptors until we see the end of packet
- * marker
- */
- i = 0;
- while (( dmabits & ( DMA_OWN | RX_ENP )) == 0 )
- {
- FST_WRB ( card, rxDescrRing[pi][rxp].bits, DMA_OWN );
- if ( ++rxp >= NUM_RX_BUFFER )
- rxp = 0;
- if ( ++i > NUM_RX_BUFFER )
- {
- dbg ( DBG_ASS,"intr_rx: Discarding more bufs"
- " than we have\n");
- break;
- }
- dmabits = FST_RDB ( card, rxDescrRing[pi][rxp].bits );
- }
-
- /* Discard the terminal buffer */
- if ( ! ( dmabits & DMA_OWN ))
- {
- FST_WRB ( card, rxDescrRing[pi][rxp].bits, DMA_OWN );
- if ( ++rxp >= NUM_RX_BUFFER )
- rxp = 0;
- }
- port->rxpos = rxp;
- return;
- }
-
- /* Allocate SKB */
- if (( skb = dev_alloc_skb ( len )) == NULL )
- {
- dbg ( DBG_RX,"intr_rx: can't allocate buffer\n");
-
- port->hdlc.stats.rx_dropped++;
-
- /* Return descriptor to card */
- FST_WRB ( card, rxDescrRing[pi][rxp].bits, DMA_OWN );
-
- if ( ++rxp >= NUM_RX_BUFFER )
- port->rxpos = 0;
- else
- port->rxpos = rxp;
- return;
- }
-
- memcpy_fromio ( skb_put ( skb, len ),
- card->mem + BUF_OFFSET ( rxBuffer[pi][rxp][0]),
- len );
-
- /* Reset buffer descriptor */
- FST_WRB ( card, rxDescrRing[pi][rxp].bits, DMA_OWN );
- if ( ++rxp >= NUM_RX_BUFFER )
- port->rxpos = 0;
- else
- port->rxpos = rxp;
-
- /* Update stats */
- port->hdlc.stats.rx_packets++;
- port->hdlc.stats.rx_bytes += len;
-
- /* Push upstream */
- skb->mac.raw = skb->data;
- skb->dev = hdlc_to_dev ( &port->hdlc );
- skb->protocol = hdlc_type_trans(skb, skb->dev);
- netif_rx ( skb );
+ unsigned char dmabits;
+ int pi;
+ int rxp;
+ int rx_status;
+ unsigned short len;
+ struct sk_buff *skb;
+
+ /* Check we have a buffer to process */
+ pi = port->index;
+ rxp = port->rxpos;
+ dmabits = FST_RDB(card, rxDescrRing[pi][rxp].bits);
+ if (dmabits & DMA_OWN) {
+ dbg(DBG_RX | DBG_INTR, "intr_rx: No buffer port %d pos %d\n",
+ pi, rxp);
+ return;
+ }
+ if (card->dmarx_in_progress) {
+ return;
+ }
+
+ /* Get buffer length */
+ len = FST_RDW(card, rxDescrRing[pi][rxp].mcnt);
+ /* Discard the CRC */
+ len -= 2;
+ if (len == 0) {
+ /*
+ * This seems to happen on the TE1 interface sometimes
+ * so throw the frame away and log the event.
+ */
+ printk_err("Frame received with 0 length. Card %d Port %d\n",
+ card->card_no, port->index);
+ /* Return descriptor to card */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ rxp = (rxp+1) % NUM_RX_BUFFER;
+ port->rxpos = rxp;
+ return;
+ }
- port_to_dev ( port )->last_rx = jiffies;
+ /* Check buffer length and for other errors. We insist on one packet
+ * in one buffer. This simplifies things greatly and since we've
+ * allocated 8K it shouldn't be a real world limitation
+ */
+ dbg(DBG_RX, "intr_rx: %d,%d: flags %x len %d\n", pi, rxp, dmabits, len);
+ if (dmabits != (RX_STP | RX_ENP) || len > LEN_RX_BUFFER - 2) {
+ fst_log_rx_error(card, port, dmabits, rxp, len);
+ fst_recover_rx_error(card, port, dmabits, rxp, len);
+ return;
+ }
+
+ /* Allocate SKB */
+ if ((skb = dev_alloc_skb(len)) == NULL) {
+ dbg(DBG_RX, "intr_rx: can't allocate buffer\n");
+
+ port->hdlc.stats.rx_dropped++;
+
+ /* Return descriptor to card */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ rxp = (rxp+1) % NUM_RX_BUFFER;
+ port->rxpos = rxp;
+ return;
+ }
+
+ /*
+ * We know the length we need to receive, len.
+ * It's not worth using the DMA for reads of less than
+ * FST_MIN_DMA_LEN
+ */
+
+ if ((len < FST_MIN_DMA_LEN) || (card->family == FST_FAMILY_TXP)) {
+ memcpy_fromio(skb_put(skb, len),
+ card->mem + BUF_OFFSET(rxBuffer[pi][rxp][0]),
+ len);
+
+ /* Reset buffer descriptor */
+ FST_WRB(card, rxDescrRing[pi][rxp].bits, DMA_OWN);
+
+ /* Update stats */
+ port->hdlc.stats.rx_packets++;
+ port->hdlc.stats.rx_bytes += len;
+
+ /* Push upstream */
+ dbg(DBG_RX, "Pushing frame up the stack\n");
+ skb->mac.raw = skb->data;
+ skb->dev = hdlc_to_dev(&port->hdlc);
+ if (port->mode == FST_RAW) {
+ /*
+ * Mark it for our own raw sockets interface
+ */
+ skb->protocol = htons(ETH_P_CUST);
+ skb->pkt_type = PACKET_HOST;
+ } else {
+ skb->protocol = hdlc_type_trans(skb, skb->dev);
+ }
+ rx_status = netif_rx(skb);
+ fst_process_rx_status(rx_status, port_to_dev(port)->name);
+ if (rx_status == NET_RX_DROP) {
+ port->hdlc.stats.rx_dropped++;
+ }
+ port_to_dev(port)->last_rx = jiffies;
+ } else {
+ card->dma_skb_rx = skb;
+ card->dma_port_rx = port;
+ card->dma_len_rx = len;
+ card->dma_rxpos = rxp;
+ fst_rx_dma(card, (char *) card->rx_dma_handle_card,
+ (char *) BUF_OFFSET(rxBuffer[pi][rxp][0]), len);
+ }
+ if (rxp != port->rxpos) {
+ dbg(DBG_ASS, "About to increment rxpos by more than 1\n");
+ dbg(DBG_ASS, "rxp = %d rxpos = %d\n", rxp, port->rxpos);
+ }
+ rxp = (rxp+1) % NUM_RX_BUFFER;
+ port->rxpos = rxp;
}
+/*
+ * The bottom halfs to the ISR
+ *
+ */
+
+static void
+do_bottom_half_tx(struct fst_card_info *card)
+{
+ struct fst_port_info *port;
+ int pi;
+ int txq_length;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ /*
+ * Find a free buffer for the transmit
+ * Step through each port on this card
+ */
+
+ dbg(DBG_TX, "do_bottom_half_tx\n");
+ for (pi = 0, port = card->ports; pi < card->nports; pi++, port++) {
+ if (!port->run)
+ continue;
+
+ while (!
+ (FST_RDB(card, txDescrRing[pi][port->txpos].bits) &
+ DMA_OWN)
+&& !(card->dmatx_in_progress)) {
+ /*
+ * There doesn't seem to be a txdone event per-se
+ * We seem to have to deduce it, by checking the DMA_OWN
+ * bit on the next buffer we think we can use
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ if ((txq_length = port->txqe - port->txqs) < 0) {
+ /*
+ * This is the case where one has wrapped and the
+ * maths gives us a negative number
+ */
+ txq_length = txq_length + FST_TXQ_DEPTH;
+ }
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ if (txq_length > 0) {
+ /*
+ * There is something to send
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ skb = port->txq[port->txqs];
+ port->txqs++;
+ if (port->txqs == FST_TXQ_DEPTH) {
+ port->txqs = 0;
+ }
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ /*
+ * copy the data and set the required indicators on the
+ * card.
+ */
+ FST_WRW(card, txDescrRing[pi][port->txpos].bcnt,
+ cnv_bcnt(skb->len));
+ if ((skb->len < FST_MIN_DMA_LEN)
+ || (card->family == FST_FAMILY_TXP)) {
+ /* Enqueue the packet with normal io */
+ memcpy_toio(card->mem +
+ BUF_OFFSET(txBuffer[pi]
+ [port->
+ txpos][0]),
+ skb->data, skb->len);
+ FST_WRB(card,
+ txDescrRing[pi][port->txpos].
+ bits,
+ DMA_OWN | TX_STP | TX_ENP);
+ port->hdlc.stats.tx_packets++;
+ port->hdlc.stats.tx_bytes += skb->len;
+ port_to_dev(port)->trans_start =
+ jiffies;
+ } else {
+ /* Or do it through dma */
+ memcpy(card->tx_dma_handle_host,
+ skb->data, skb->len);
+ card->dma_port_tx = port;
+ card->dma_len_tx = skb->len;
+ card->dma_txpos = port->txpos;
+ fst_tx_dma(card,
+ (char *) card->
+ tx_dma_handle_card,
+ (char *)
+ BUF_OFFSET(txBuffer[pi]
+ [port->txpos][0]),
+ skb->len);
+ }
+ if (++port->txpos >= NUM_TX_BUFFER)
+ port->txpos = 0;
+ /*
+ * If we have flow control on, can we now release it?
+ */
+ if (port->start) {
+ if (txq_length < fst_txq_low) {
+ netif_wake_queue(port_to_dev
+ (port));
+ port->start = 0;
+ }
+ }
+ dev_kfree_skb(skb);
+ } else {
+ /*
+ * Nothing to send so break out of the while loop
+ */
+ break;
+ }
+ }
+ }
+}
+
+static void
+do_bottom_half_rx(struct fst_card_info *card)
+{
+ struct fst_port_info *port;
+ int pi;
+ int rx_count = 0;
+
+ /* Check for rx completions on all ports on this card */
+ dbg(DBG_RX, "do_bottom_half_rx\n");
+ for (pi = 0, port = card->ports; pi < card->nports; pi++, port++) {
+ if (!port->run)
+ continue;
+ while (!(FST_RDB(card, rxDescrRing[pi][port->rxpos].bits)
+ & DMA_OWN) && !(card->dmarx_in_progress)) {
+ if (rx_count > fst_max_reads) {
+ /*
+ * Don't spend forever in receive processing
+ * Schedule another event
+ */
+ fst_q_work_item(&fst_work_intq, card->card_no);
+ tasklet_schedule(&fst_int_task);
+ break; /* Leave the loop */
+ }
+ fst_intr_rx(card, port);
+ rx_count++;
+ }
+ }
+}
/*
* The interrupt service routine
* Dev_id is our fst_card_info pointer
*/
static void
-fst_intr ( int irq, void *dev_id, struct pt_regs *regs )
+fst_intr(int irq, void *dev_id, struct pt_regs *regs)
{
- struct fst_card_info *card;
- struct fst_port_info *port;
- int rdidx; /* Event buffer indices */
- int wridx;
- int event; /* Actual event for processing */
- int pi;
-
- if (( card = dev_id ) == NULL )
- {
- dbg ( DBG_INTR,"intr: spurious %d\n", irq );
- return;
- }
-
- dbg ( DBG_INTR,"intr: %d %p\n", irq, card );
-
- spin_lock ( &card->card_lock );
-
- /* Clear and reprime the interrupt source */
- fst_clear_intr ( card );
-
- /* Set the software acknowledge */
- FST_WRB ( card, interruptHandshake, 0xEE );
-
- /* Drain the event queue */
- rdidx = FST_RDB ( card, interruptEvent.rdindex );
- wridx = FST_RDB ( card, interruptEvent.wrindex );
- while ( rdidx != wridx )
- {
- event = FST_RDB ( card, interruptEvent.evntbuff[rdidx]);
-
- port = &card->ports[event & 0x03];
-
- dbg ( DBG_INTR,"intr: %x\n", event );
-
- switch ( event )
- {
- case CTLA_CHG:
- case CTLB_CHG:
- case CTLC_CHG:
- case CTLD_CHG:
- if ( port->run )
- fst_intr_ctlchg ( card, port );
- break;
-
- case ABTA_SENT:
- case ABTB_SENT:
- case ABTC_SENT:
- case ABTD_SENT:
- dbg ( DBG_TX,"Abort complete port %d\n", event & 0x03 );
- break;
-
- case TXA_UNDF:
- case TXB_UNDF:
- case TXC_UNDF:
- case TXD_UNDF:
- /* Difficult to see how we'd get this given that we
- * always load up the entire packet for DMA.
- */
- dbg ( DBG_TX,"Tx underflow port %d\n", event & 0x03 );
- port->hdlc.stats.tx_errors++;
- port->hdlc.stats.tx_fifo_errors++;
- break;
-
- case INIT_CPLT:
- dbg ( DBG_INIT,"Card init OK intr\n");
- break;
-
- case INIT_FAIL:
- dbg ( DBG_INIT,"Card init FAILED intr\n");
- card->state = FST_IFAILED;
- break;
-
- default:
- printk_err ("intr: unknown card event code. ignored\n");
- break;
- }
-
- /* Bump and wrap the index */
- if ( ++rdidx >= MAX_CIRBUFF )
- rdidx = 0;
- }
- FST_WRB ( card, interruptEvent.rdindex, rdidx );
-
- for ( pi = 0, port = card->ports ; pi < card->nports ; pi++, port++ )
- {
- if ( ! port->run )
- continue;
-
- /* Check for rx completions */
- while ( ! ( FST_RDB ( card, rxDescrRing[pi][port->rxpos].bits )
- & DMA_OWN ))
- {
- fst_intr_rx ( card, port );
- }
-
- /* Check for Tx completions */
- while ( port->txcnt > 0 && ! ( FST_RDB ( card,
- txDescrRing[pi][port->txipos].bits ) & DMA_OWN ))
- {
- --port->txcnt;
- if ( ++port->txipos >= NUM_TX_BUFFER )
- port->txipos = 0;
- netif_wake_queue ( port_to_dev ( port ));
- }
- }
+ struct fst_card_info *card;
+ struct fst_port_info *port;
+ int rdidx; /* Event buffer indices */
+ int wridx;
+ int event; /* Actual event for processing */
+ unsigned int dma_intcsr = 0;
+ unsigned int do_card_interrupt;
+ unsigned int int_retry_count;
+
+ if ((card = dev_id) == NULL) {
+ dbg(DBG_INTR, "intr: spurious %d\n", irq);
+ return;
+ }
- spin_unlock ( &card->card_lock );
-}
+ /*
+ * Check to see if the interrupt was for this card
+ * return if not
+ * Note that the call to clear the interrupt is important
+ */
+ dbg(DBG_INTR, "intr: %d %p\n", irq, card);
+ if (card->state != FST_RUNNING) {
+ printk_err
+ ("Interrupt received for card %d in a non running state (%d)\n",
+ card->card_no, card->state);
+
+ /*
+ * It is possible to really be running, i.e. we have re-loaded
+ * a running card
+ * Clear and reprime the interrupt source
+ */
+ fst_clear_intr(card);
+ return;
+ }
+
+ /* Clear and reprime the interrupt source */
+ fst_clear_intr(card);
+
+ /*
+ * Is the interrupt for this card (handshake == 1)
+ */
+ do_card_interrupt = 0;
+ if (FST_RDB(card, interruptHandshake) == 1) {
+ do_card_interrupt += FST_CARD_INT;
+ /* Set the software acknowledge */
+ FST_WRB(card, interruptHandshake, 0xEE);
+ }
+ if (card->family == FST_FAMILY_TXU) {
+ /*
+ * Is it a DMA Interrupt
+ */
+ dma_intcsr = inl(card->pci_conf + INTCSR_9054);
+ if (dma_intcsr & 0x00200000) {
+ /*
+ * DMA Channel 0 (Rx transfer complete)
+ */
+ dbg(DBG_RX, "DMA Rx xfer complete\n");
+ outb(0x8, card->pci_conf + DMACSR0);
+ fst_rx_dma_complete(card, card->dma_port_rx,
+ card->dma_len_rx, card->dma_skb_rx,
+ card->dma_rxpos);
+ card->dmarx_in_progress = 0;
+ do_card_interrupt += FST_RX_DMA_INT;
+ }
+ if (dma_intcsr & 0x00400000) {
+ /*
+ * DMA Channel 1 (Tx transfer complete)
+ */
+ dbg(DBG_TX, "DMA Tx xfer complete\n");
+ outb(0x8, card->pci_conf + DMACSR1);
+ fst_tx_dma_complete(card, card->dma_port_tx,
+ card->dma_len_tx, card->dma_txpos);
+ card->dmatx_in_progress = 0;
+ do_card_interrupt += FST_TX_DMA_INT;
+ }
+ }
+ /*
+ * Have we been missing Interrupts
+ */
+ int_retry_count = FST_RDL(card, interruptRetryCount);
+ if (int_retry_count) {
+ dbg(DBG_ASS, "Card %d int_retry_count is %d\n",
+ card->card_no, int_retry_count);
+ FST_WRL(card, interruptRetryCount, 0);
+ }
+
+ if (!do_card_interrupt) {
+ return;
+ }
+
+ /* Scehdule the bottom half of the ISR */
+ fst_q_work_item(&fst_work_intq, card->card_no);
+ tasklet_schedule(&fst_int_task);
+
+ /* Drain the event queue */
+ rdidx = FST_RDB(card, interruptEvent.rdindex) & 0x1f;
+ wridx = FST_RDB(card, interruptEvent.wrindex) & 0x1f;
+ while (rdidx != wridx) {
+ event = FST_RDB(card, interruptEvent.evntbuff[rdidx]);
+ port = &card->ports[event & 0x03];
+
+ dbg(DBG_INTR, "Processing Interrupt event: %x\n", event);
+
+ switch (event) {
+ case TE1_ALMA:
+ dbg(DBG_INTR, "TE1 Alarm intr\n");
+ if (port->run)
+ fst_intr_te1_alarm(card, port);
+ break;
+
+ case CTLA_CHG:
+ case CTLB_CHG:
+ case CTLC_CHG:
+ case CTLD_CHG:
+ if (port->run)
+ fst_intr_ctlchg(card, port);
+ break;
+
+ case ABTA_SENT:
+ case ABTB_SENT:
+ case ABTC_SENT:
+ case ABTD_SENT:
+ dbg(DBG_TX, "Abort complete port %d\n", port->index);
+ break;
+
+ case TXA_UNDF:
+ case TXB_UNDF:
+ case TXC_UNDF:
+ case TXD_UNDF:
+ /* Difficult to see how we'd get this given that we
+ * always load up the entire packet for DMA.
+ */
+ dbg(DBG_TX, "Tx underflow port %d\n", port->index);
+
+ port->hdlc.stats.tx_errors++;
+ port->hdlc.stats.tx_fifo_errors++;
+ dbg(DBG_ASS, "Tx underflow on card %d port %d\n",
+ card->card_no, port->index);
+ break;
+
+ case INIT_CPLT:
+ dbg(DBG_INIT, "Card init OK intr\n");
+ break;
+
+ case INIT_FAIL:
+ dbg(DBG_INIT, "Card init FAILED intr\n");
+ card->state = FST_IFAILED;
+ break;
+
+ default:
+ printk_err("intr: unknown card event %d. ignored\n",
+ event);
+ break;
+ }
+
+ /* Bump and wrap the index */
+ if (++rdidx >= MAX_CIRBUFF)
+ rdidx = 0;
+ }
+ FST_WRB(card, interruptEvent.rdindex, rdidx);
+}
/* Check that the shared memory configuration is one that we can handle
* and that some basic parameters are correct
*/
static void
-check_started_ok ( struct fst_card_info *card )
+check_started_ok(struct fst_card_info *card)
{
- int i;
+ int i;
- /* Check structure version and end marker */
- if ( FST_RDW ( card, smcVersion ) != SMC_VERSION )
- {
- printk_err ("Bad shared memory version %d expected %d\n",
- FST_RDW ( card, smcVersion ), SMC_VERSION );
- card->state = FST_BADVERSION;
- return;
- }
- if ( FST_RDL ( card, endOfSmcSignature ) != END_SIG )
- {
- printk_err ("Missing shared memory signature\n");
- card->state = FST_BADVERSION;
- return;
- }
- /* Firmware status flag, 0x00 = initialising, 0x01 = OK, 0xFF = fail */
- if (( i = FST_RDB ( card, taskStatus )) == 0x01 )
- {
- card->state = FST_RUNNING;
- }
- else if ( i == 0xFF )
- {
- printk_err ("Firmware initialisation failed. Card halted\n");
- card->state = FST_HALTED;
- return;
- }
- else if ( i != 0x00 )
- {
- printk_err ("Unknown firmware status 0x%x\n", i );
- card->state = FST_HALTED;
- return;
- }
-
- /* Finally check the number of ports reported by firmware against the
- * number we assumed at card detection. Should never happen with
- * existing firmware etc so we just report it for the moment.
- */
- if ( FST_RDL ( card, numberOfPorts ) != card->nports )
- {
- printk_warn ("Port count mismatch."
- " Firmware thinks %d we say %d\n",
- FST_RDL ( card, numberOfPorts ), card->nports );
- }
-}
+ /* Check structure version and end marker */
+ if (FST_RDW(card, smcVersion) != SMC_VERSION) {
+ printk_err("Bad shared memory version %d expected %d\n",
+ FST_RDW(card, smcVersion), SMC_VERSION);
+ card->state = FST_BADVERSION;
+ return;
+ }
+ if (FST_RDL(card, endOfSmcSignature) != END_SIG) {
+ printk_err("Missing shared memory signature\n");
+ card->state = FST_BADVERSION;
+ return;
+ }
+ /* Firmware status flag, 0x00 = initialising, 0x01 = OK, 0xFF = fail */
+ if ((i = FST_RDB(card, taskStatus)) == 0x01) {
+ card->state = FST_RUNNING;
+ } else if (i == 0xFF) {
+ printk_err("Firmware initialisation failed. Card halted\n");
+ card->state = FST_HALTED;
+ return;
+ } else if (i != 0x00) {
+ printk_err("Unknown firmware status 0x%x\n", i);
+ card->state = FST_HALTED;
+ return;
+ }
+ /* Finally check the number of ports reported by firmware against the
+ * number we assumed at card detection. Should never happen with
+ * existing firmware etc so we just report it for the moment.
+ */
+ if (FST_RDL(card, numberOfPorts) != card->nports) {
+ printk_warn("Port count mismatch on card %d."
+ " Firmware thinks %d we say %d\n", card->card_no,
+ FST_RDL(card, numberOfPorts), card->nports);
+ }
+}
static int
-set_conf_from_info ( struct fst_card_info *card, struct fst_port_info *port,
- struct fstioc_info *info )
+set_conf_from_info(struct fst_card_info *card, struct fst_port_info *port,
+ struct fstioc_info *info)
{
- int err;
+ int err;
+ unsigned char my_framing;
- /* Set things according to the user set valid flags.
- * Several of the old options have been invalidated/replaced by the
- * generic HDLC package.
- */
- err = 0;
- if ( info->valid & FSTVAL_PROTO )
- err = -EINVAL;
- if ( info->valid & FSTVAL_CABLE )
- err = -EINVAL;
- if ( info->valid & FSTVAL_SPEED )
- err = -EINVAL;
+ /* Set things according to the user set valid flags
+ * Several of the old options have been invalidated/replaced by the
+ * generic hdlc package.
+ */
+ err = 0;
+ if (info->valid & FSTVAL_PROTO) {
+ if (info->proto == FST_RAW)
+ port->mode = FST_RAW;
+ else
+ port->mode = FST_GEN_HDLC;
+ }
+
+ if (info->valid & FSTVAL_CABLE)
+ err = -EINVAL;
- if ( info->valid & FSTVAL_MODE )
- FST_WRW ( card, cardMode, info->cardMode );
+ if (info->valid & FSTVAL_SPEED)
+ err = -EINVAL;
+
+ if (info->valid & FSTVAL_PHASE)
+ FST_WRB(card, portConfig[port->index].invertClock,
+ info->invertClock);
+ if (info->valid & FSTVAL_MODE)
+ FST_WRW(card, cardMode, info->cardMode);
+ if (info->valid & FSTVAL_TE1) {
+ FST_WRL(card, suConfig.dataRate, info->lineSpeed);
+ FST_WRB(card, suConfig.clocking, info->clockSource);
+ my_framing = FRAMING_E1;
+ if (info->framing == E1)
+ my_framing = FRAMING_E1;
+ if (info->framing == T1)
+ my_framing = FRAMING_T1;
+ if (info->framing == J1)
+ my_framing = FRAMING_J1;
+ FST_WRB(card, suConfig.framing, my_framing);
+ FST_WRB(card, suConfig.structure, info->structure);
+ FST_WRB(card, suConfig.interface, info->interface);
+ FST_WRB(card, suConfig.coding, info->coding);
+ FST_WRB(card, suConfig.lineBuildOut, info->lineBuildOut);
+ FST_WRB(card, suConfig.equalizer, info->equalizer);
+ FST_WRB(card, suConfig.transparentMode, info->transparentMode);
+ FST_WRB(card, suConfig.loopMode, info->loopMode);
+ FST_WRB(card, suConfig.range, info->range);
+ FST_WRB(card, suConfig.txBufferMode, info->txBufferMode);
+ FST_WRB(card, suConfig.rxBufferMode, info->rxBufferMode);
+ FST_WRB(card, suConfig.startingSlot, info->startingSlot);
+ FST_WRB(card, suConfig.losThreshold, info->losThreshold);
+ if (info->idleCode)
+ FST_WRB(card, suConfig.enableIdleCode, 1);
+ else
+ FST_WRB(card, suConfig.enableIdleCode, 0);
+ FST_WRB(card, suConfig.idleCode, info->idleCode);
#if FST_DEBUG
- if ( info->valid & FSTVAL_DEBUG )
- fst_debug_mask = info->debug;
+ if (info->valid & FSTVAL_TE1) {
+ printk("Setting TE1 data\n");
+ printk("Line Speed = %d\n", info->lineSpeed);
+ printk("Start slot = %d\n", info->startingSlot);
+ printk("Clock source = %d\n", info->clockSource);
+ printk("Framing = %d\n", my_framing);
+ printk("Structure = %d\n", info->structure);
+ printk("interface = %d\n", info->interface);
+ printk("Coding = %d\n", info->coding);
+ printk("Line build out = %d\n", info->lineBuildOut);
+ printk("Equaliser = %d\n", info->equalizer);
+ printk("Transparent mode = %d\n",
+ info->transparentMode);
+ printk("Loop mode = %d\n", info->loopMode);
+ printk("Range = %d\n", info->range);
+ printk("Tx Buffer mode = %d\n", info->txBufferMode);
+ printk("Rx Buffer mode = %d\n", info->rxBufferMode);
+ printk("LOS Threshold = %d\n", info->losThreshold);
+ printk("Idle Code = %d\n", info->idleCode);
+ }
+#endif
+ }
+#if FST_DEBUG
+ if (info->valid & FSTVAL_DEBUG) {
+ fst_debug_mask = info->debug;
+ }
#endif
- return err;
+ return err;
}
static void
-gather_conf_info ( struct fst_card_info *card, struct fst_port_info *port,
- struct fstioc_info *info )
+gather_conf_info(struct fst_card_info *card, struct fst_port_info *port,
+ struct fstioc_info *info)
{
- int i;
+ int i;
- memset ( info, 0, sizeof ( struct fstioc_info ));
+ memset(info, 0, sizeof (struct fstioc_info));
- i = port->index;
- info->nports = card->nports;
- info->type = card->type;
- info->state = card->state;
- info->proto = FST_GEN_HDLC;
- info->index = i;
+ i = port->index;
+ info->kernelVersion = LINUX_VERSION_CODE;
+ info->nports = card->nports;
+ info->type = card->type;
+ info->state = card->state;
+ info->proto = FST_GEN_HDLC;
+ info->index = i;
#if FST_DEBUG
- info->debug = fst_debug_mask;
+ info->debug = fst_debug_mask;
#endif
- /* Only mark information as valid if card is running.
- * Copy the data anyway in case it is useful for diagnostics
- */
- info->valid
- = (( card->state == FST_RUNNING ) ? FSTVAL_ALL : FSTVAL_CARD )
+ /* Only mark information as valid if card is running.
+ * Copy the data anyway in case it is useful for diagnostics
+ */
+ info->valid = ((card->state == FST_RUNNING) ? FSTVAL_ALL : FSTVAL_CARD)
#if FST_DEBUG
- | FSTVAL_DEBUG
+ | FSTVAL_DEBUG
#endif
- ;
+ ;
- info->lineInterface = FST_RDW ( card, portConfig[i].lineInterface );
- info->internalClock = FST_RDB ( card, portConfig[i].internalClock );
- info->lineSpeed = FST_RDL ( card, portConfig[i].lineSpeed );
- info->v24IpSts = FST_RDL ( card, v24IpSts[i] );
- info->v24OpSts = FST_RDL ( card, v24OpSts[i] );
- info->clockStatus = FST_RDW ( card, clockStatus[i] );
- info->cableStatus = FST_RDW ( card, cableStatus );
- info->cardMode = FST_RDW ( card, cardMode );
- info->smcFirmwareVersion = FST_RDL ( card, smcFirmwareVersion );
+ info->lineInterface = FST_RDW(card, portConfig[i].lineInterface);
+ info->internalClock = FST_RDB(card, portConfig[i].internalClock);
+ info->lineSpeed = FST_RDL(card, portConfig[i].lineSpeed);
+ info->invertClock = FST_RDB(card, portConfig[i].invertClock);
+ info->v24IpSts = FST_RDL(card, v24IpSts[i]);
+ info->v24OpSts = FST_RDL(card, v24OpSts[i]);
+ info->clockStatus = FST_RDW(card, clockStatus[i]);
+ info->cableStatus = FST_RDW(card, cableStatus);
+ info->cardMode = FST_RDW(card, cardMode);
+ info->smcFirmwareVersion = FST_RDL(card, smcFirmwareVersion);
+
+ /*
+ * The T2U can report cable presence for both A or B
+ * in bits 0 and 1 of cableStatus. See which port we are and
+ * do the mapping.
+ */
+ if (card->family == FST_FAMILY_TXU) {
+ if (port->index == 0) {
+ /*
+ * Port A
+ */
+ info->cableStatus = info->cableStatus & 1;
+ } else {
+ /*
+ * Port B
+ */
+ info->cableStatus = info->cableStatus >> 1;
+ info->cableStatus = info->cableStatus & 1;
+ }
+ }
+ /*
+ * Some additional bits if we are TE1
+ */
+ if (card->type == FST_TYPE_TE1) {
+ info->lineSpeed = FST_RDL(card, suConfig.dataRate);
+ info->clockSource = FST_RDB(card, suConfig.clocking);
+ info->framing = FST_RDB(card, suConfig.framing);
+ info->structure = FST_RDB(card, suConfig.structure);
+ info->interface = FST_RDB(card, suConfig.interface);
+ info->coding = FST_RDB(card, suConfig.coding);
+ info->lineBuildOut = FST_RDB(card, suConfig.lineBuildOut);
+ info->equalizer = FST_RDB(card, suConfig.equalizer);
+ info->loopMode = FST_RDB(card, suConfig.loopMode);
+ info->range = FST_RDB(card, suConfig.range);
+ info->txBufferMode = FST_RDB(card, suConfig.txBufferMode);
+ info->rxBufferMode = FST_RDB(card, suConfig.rxBufferMode);
+ info->startingSlot = FST_RDB(card, suConfig.startingSlot);
+ info->losThreshold = FST_RDB(card, suConfig.losThreshold);
+ if (FST_RDB(card, suConfig.enableIdleCode))
+ info->idleCode = FST_RDB(card, suConfig.idleCode);
+ else
+ info->idleCode = 0;
+ info->receiveBufferDelay =
+ FST_RDL(card, suStatus.receiveBufferDelay);
+ info->framingErrorCount =
+ FST_RDL(card, suStatus.framingErrorCount);
+ info->codeViolationCount =
+ FST_RDL(card, suStatus.codeViolationCount);
+ info->crcErrorCount = FST_RDL(card, suStatus.crcErrorCount);
+ info->lineAttenuation = FST_RDL(card, suStatus.lineAttenuation);
+ info->lossOfSignal = FST_RDB(card, suStatus.lossOfSignal);
+ info->receiveRemoteAlarm =
+ FST_RDB(card, suStatus.receiveRemoteAlarm);
+ info->alarmIndicationSignal =
+ FST_RDB(card, suStatus.alarmIndicationSignal);
+ }
}
-
static int
-fst_set_iface ( struct fst_card_info *card, struct fst_port_info *port,
- struct ifreq *ifr )
+fst_set_iface(struct fst_card_info *card, struct fst_port_info *port,
+ struct ifreq *ifr)
{
- sync_serial_settings sync;
- int i;
+ sync_serial_settings sync;
+ int i;
+
+ if (ifr->ifr_settings.size != sizeof (sync)) {
+ return -ENOMEM;
+ }
+
+ if (copy_from_user
+ (&sync, ifr->ifr_settings.ifs_ifsu.sync, sizeof (sync))) {
+ return -EFAULT;
+ }
+
+ if (sync.loopback)
+ return -EINVAL;
+
+ i = port->index;
+
+ switch (ifr->ifr_settings.type) {
+ case IF_IFACE_V35:
+ FST_WRW(card, portConfig[i].lineInterface, V35);
+ port->hwif = V35;
+ break;
+
+ case IF_IFACE_V24:
+ FST_WRW(card, portConfig[i].lineInterface, V24);
+ port->hwif = V24;
+ break;
+
+ case IF_IFACE_X21:
+ FST_WRW(card, portConfig[i].lineInterface, X21);
+ port->hwif = X21;
+ break;
+
+ case IF_IFACE_X21D:
+ FST_WRW(card, portConfig[i].lineInterface, X21D);
+ port->hwif = X21D;
+ break;
+
+ case IF_IFACE_T1:
+ FST_WRW(card, portConfig[i].lineInterface, T1);
+ port->hwif = T1;
+ break;
+
+ case IF_IFACE_E1:
+ FST_WRW(card, portConfig[i].lineInterface, E1);
+ port->hwif = E1;
+ break;
+
+ case IF_IFACE_SYNC_SERIAL:
+ break;
+
+ default:
+ return -EINVAL;
+ }
- if (copy_from_user (&sync, ifr->ifr_settings.ifs_ifsu.sync,
- sizeof (sync)))
- return -EFAULT;
-
- if ( sync.loopback )
- return -EINVAL;
-
- i = port->index;
-
- switch (ifr->ifr_settings.type)
- {
- case IF_IFACE_V35:
- FST_WRW ( card, portConfig[i].lineInterface, V35 );
- port->hwif = V35;
- break;
-
- case IF_IFACE_V24:
- FST_WRW ( card, portConfig[i].lineInterface, V24 );
- port->hwif = V24;
- break;
-
- case IF_IFACE_X21:
- FST_WRW ( card, portConfig[i].lineInterface, X21 );
- port->hwif = X21;
- break;
-
- case IF_IFACE_SYNC_SERIAL:
- break;
-
- default:
- return -EINVAL;
- }
-
- switch ( sync.clock_type )
- {
- case CLOCK_EXT:
- FST_WRB ( card, portConfig[i].internalClock, EXTCLK );
- break;
-
- case CLOCK_INT:
- FST_WRB ( card, portConfig[i].internalClock, INTCLK );
- break;
-
- default:
- return -EINVAL;
- }
- FST_WRL ( card, portConfig[i].lineSpeed, sync.clock_rate );
- return 0;
+ switch (sync.clock_type) {
+ case CLOCK_EXT:
+ FST_WRB(card, portConfig[i].internalClock, EXTCLK);
+ break;
+
+ case CLOCK_INT:
+ FST_WRB(card, portConfig[i].internalClock, INTCLK);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ FST_WRL(card, portConfig[i].lineSpeed, sync.clock_rate);
+ return 0;
}
static int
-fst_get_iface ( struct fst_card_info *card, struct fst_port_info *port,
- struct ifreq *ifr )
+fst_get_iface(struct fst_card_info *card, struct fst_port_info *port,
+ struct ifreq *ifr)
{
- sync_serial_settings sync;
- int i;
+ sync_serial_settings sync;
+ int i;
- /* First check what line type is set, we'll default to reporting X.21
- * if nothing is set as IF_IFACE_SYNC_SERIAL implies it can't be
- * changed
- */
- switch ( port->hwif )
- {
- case V35:
- ifr->ifr_settings.type = IF_IFACE_V35;
- break;
- case V24:
- ifr->ifr_settings.type = IF_IFACE_V24;
- break;
- case X21:
- default:
- ifr->ifr_settings.type = IF_IFACE_X21;
- break;
- }
-
- if (ifr->ifr_settings.size < sizeof(sync)) {
- ifr->ifr_settings.size = sizeof(sync); /* data size wanted */
- return -ENOBUFS;
- }
-
- i = port->index;
- sync.clock_rate = FST_RDL ( card, portConfig[i].lineSpeed );
- /* Lucky card and linux use same encoding here */
- sync.clock_type = FST_RDB ( card, portConfig[i].internalClock );
- sync.loopback = 0;
-
- if (copy_to_user (ifr->ifr_settings.ifs_ifsu.sync, &sync,
- sizeof(sync)))
- return -EFAULT;
+ /* First check what line type is set, we'll default to reporting X.21
+ * if nothing is set as IF_IFACE_SYNC_SERIAL implies it can't be
+ * changed
+ */
+ switch (port->hwif) {
+ case E1:
+ ifr->ifr_settings.type = IF_IFACE_E1;
+ break;
+ case T1:
+ ifr->ifr_settings.type = IF_IFACE_T1;
+ break;
+ case V35:
+ ifr->ifr_settings.type = IF_IFACE_V35;
+ break;
+ case V24:
+ ifr->ifr_settings.type = IF_IFACE_V24;
+ break;
+ case X21D:
+ ifr->ifr_settings.type = IF_IFACE_X21D;
+ break;
+ case X21:
+ default:
+ ifr->ifr_settings.type = IF_IFACE_X21;
+ break;
+ }
+ if (ifr->ifr_settings.size == 0) {
+ return 0; /* only type requested */
+ }
+ if (ifr->ifr_settings.size < sizeof (sync)) {
+ return -ENOMEM;
+ }
- return 0;
-}
+ i = port->index;
+ sync.clock_rate = FST_RDL(card, portConfig[i].lineSpeed);
+ /* Lucky card and linux use same encoding here */
+ sync.clock_type = FST_RDB(card, portConfig[i].internalClock) ==
+ INTCLK ? CLOCK_INT : CLOCK_EXT;
+ sync.loopback = 0;
+
+ if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &sync, sizeof (sync))) {
+ return -EFAULT;
+ }
+ ifr->ifr_settings.size = sizeof (sync);
+ return 0;
+}
static int
-fst_ioctl ( struct net_device *dev, struct ifreq *ifr, int cmd )
+fst_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct fst_card_info *card;
- struct fst_port_info *port;
- struct fstioc_write wrthdr;
- struct fstioc_info info;
- unsigned long flags;
-
- dbg ( DBG_IOCTL,"ioctl: %x, %p\n", cmd, ifr->ifr_data );
-
- port = dev_to_port ( dev );
- card = port->card;
-
- if ( !capable ( CAP_NET_ADMIN ))
- return -EPERM;
-
- switch ( cmd )
- {
- case FSTCPURESET:
- fst_cpureset ( card );
- card->state = FST_RESET;
- return 0;
-
- case FSTCPURELEASE:
- fst_cpurelease ( card );
- card->state = FST_STARTING;
- return 0;
-
- case FSTWRITE: /* Code write (download) */
-
- /* First copy in the header with the length and offset of data
- * to write
- */
- if ( ifr->ifr_data == NULL )
- {
- return -EINVAL;
- }
- if ( copy_from_user ( &wrthdr, ifr->ifr_data,
- sizeof ( struct fstioc_write )))
- {
- return -EFAULT;
- }
-
- /* Sanity check the parameters. We don't support partial writes
- * when going over the top
- */
- if ( wrthdr.size > FST_MEMSIZE || wrthdr.offset > FST_MEMSIZE
- || wrthdr.size + wrthdr.offset > FST_MEMSIZE )
- {
- return -ENXIO;
- }
-
- /* Now copy the data to the card.
- * This will probably break on some architectures.
- * I'll fix it when I have something to test on.
- */
- if ( copy_from_user ( card->mem + wrthdr.offset,
- ifr->ifr_data + sizeof ( struct fstioc_write ),
- wrthdr.size ))
- {
- return -EFAULT;
- }
-
- /* Writes to the memory of a card in the reset state constitute
- * a download
- */
- if ( card->state == FST_RESET )
- {
- card->state = FST_DOWNLOAD;
- }
- return 0;
-
- case FSTGETCONF:
-
- /* If card has just been started check the shared memory config
- * version and marker
- */
- if ( card->state == FST_STARTING )
- {
- check_started_ok ( card );
-
- /* If everything checked out enable card interrupts */
- if ( card->state == FST_RUNNING )
- {
- spin_lock_irqsave ( &card->card_lock, flags );
- fst_clear_intr ( card );
- FST_WRB ( card, interruptHandshake, 0xEE );
- spin_unlock_irqrestore ( &card->card_lock,
- flags );
- }
- }
-
- if ( ifr->ifr_data == NULL )
- {
- return -EINVAL;
- }
-
- gather_conf_info ( card, port, &info );
-
- if ( copy_to_user ( ifr->ifr_data, &info, sizeof ( info )))
- {
- return -EFAULT;
- }
- return 0;
-
- case FSTSETCONF:
-
- /* Most of the setting have been moved to the generic ioctls
- * this just covers debug and board ident mode now
- */
- if ( copy_from_user ( &info, ifr->ifr_data, sizeof ( info )))
- {
- return -EFAULT;
- }
-
- return set_conf_from_info ( card, port, &info );
-
- case SIOCWANDEV:
- switch (ifr->ifr_settings.type)
- {
- case IF_GET_IFACE:
- return fst_get_iface ( card, port, ifr );
-
- case IF_IFACE_SYNC_SERIAL:
- case IF_IFACE_V35:
- case IF_IFACE_V24:
- case IF_IFACE_X21:
- return fst_set_iface ( card, port, ifr );
-
- default:
- return hdlc_ioctl ( dev, ifr, cmd );
- }
-
- default:
- /* Not one of ours. Pass through to HDLC package */
- return hdlc_ioctl ( dev, ifr, cmd );
- }
-}
-
-
-static void
-fst_openport ( struct fst_port_info *port )
-{
- int signals;
-
- /* Only init things if card is actually running. This allows open to
- * succeed for downloads etc.
- */
- if ( port->card->state == FST_RUNNING )
- {
- if ( port->run )
- {
- dbg ( DBG_OPEN,"open: found port already running\n");
-
- fst_issue_cmd ( port, STOPPORT );
- port->run = 0;
- }
-
- fst_rx_config ( port );
- fst_tx_config ( port );
- fst_op_raise ( port, OPSTS_RTS | OPSTS_DTR );
-
- fst_issue_cmd ( port, STARTPORT );
- port->run = 1;
-
- signals = FST_RDL ( port->card, v24DebouncedSts[port->index]);
- if ( signals & (( port->hwif == X21 ) ? IPSTS_INDICATE
- : IPSTS_DCD ))
- netif_carrier_on ( port_to_dev ( port ));
- else
- netif_carrier_off ( port_to_dev ( port ));
- }
-}
-
-static void
-fst_closeport ( struct fst_port_info *port )
-{
- if ( port->card->state == FST_RUNNING )
- {
- if ( port->run )
- {
- port->run = 0;
- fst_op_lower ( port, OPSTS_RTS | OPSTS_DTR );
-
- fst_issue_cmd ( port, STOPPORT );
- }
- else
- {
- dbg ( DBG_OPEN,"close: port not running\n");
- }
- }
+ struct fst_card_info *card;
+ struct fst_port_info *port;
+ struct fstioc_write wrthdr;
+ struct fstioc_info info;
+ unsigned long flags;
+
+ dbg(DBG_IOCTL, "ioctl: %x, %p\n", cmd, ifr->ifr_data);
+
+ port = dev_to_port(dev);
+ card = port->card;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ switch (cmd) {
+ case FSTCPURESET:
+ fst_cpureset(card);
+ card->state = FST_RESET;
+ return 0;
+
+ case FSTCPURELEASE:
+ fst_cpurelease(card);
+ card->state = FST_STARTING;
+ return 0;
+
+ case FSTWRITE: /* Code write (download) */
+
+ /* First copy in the header with the length and offset of data
+ * to write
+ */
+ if (ifr->ifr_data == NULL) {
+ return -EINVAL;
+ }
+ if (copy_from_user(&wrthdr, ifr->ifr_data,
+ sizeof (struct fstioc_write))) {
+ return -EFAULT;
+ }
+
+ /* Sanity check the parameters. We don't support partial writes
+ * when going over the top
+ */
+ if (wrthdr.size > FST_MEMSIZE || wrthdr.offset > FST_MEMSIZE
+ || wrthdr.size + wrthdr.offset > FST_MEMSIZE) {
+ return -ENXIO;
+ }
+
+ /* Now copy the data to the card.
+ * This will probably break on some architectures.
+ * I'll fix it when I have something to test on.
+ */
+ if (copy_from_user(card->mem + wrthdr.offset,
+ ifr->ifr_data + sizeof (struct fstioc_write),
+ wrthdr.size)) {
+ return -EFAULT;
+ }
+
+ /* Writes to the memory of a card in the reset state constitute
+ * a download
+ */
+ if (card->state == FST_RESET) {
+ card->state = FST_DOWNLOAD;
+ }
+ return 0;
+
+ case FSTGETCONF:
+
+ /* If card has just been started check the shared memory config
+ * version and marker
+ */
+ if (card->state == FST_STARTING) {
+ check_started_ok(card);
+
+ /* If everything checked out enable card interrupts */
+ if (card->state == FST_RUNNING) {
+ spin_lock_irqsave(&card->card_lock, flags);
+ fst_enable_intr(card);
+ FST_WRB(card, interruptHandshake, 0xEE);
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ }
+ }
+
+ if (ifr->ifr_data == NULL) {
+ return -EINVAL;
+ }
+
+ gather_conf_info(card, port, &info);
+
+ if (copy_to_user(ifr->ifr_data, &info, sizeof (info))) {
+ return -EFAULT;
+ }
+ return 0;
+
+ case FSTSETCONF:
+
+ /*
+ * Most of the settings have been moved to the generic ioctls
+ * this just covers debug and board ident now
+ */
+
+ if (card->state != FST_RUNNING) {
+ printk_err
+ ("Attempt to configure card %d in non-running state (%d)\n",
+ card->card_no, card->state);
+ return -EIO;
+ }
+ if (copy_from_user(&info, ifr->ifr_data, sizeof (info))) {
+ return -EFAULT;
+ }
+
+ return set_conf_from_info(card, port, &info);
+
+ case SIOCWANDEV:
+ switch (ifr->ifr_settings.type) {
+ case IF_GET_IFACE:
+ return fst_get_iface(card, port, ifr);
+
+ case IF_IFACE_SYNC_SERIAL:
+ case IF_IFACE_V35:
+ case IF_IFACE_V24:
+ case IF_IFACE_X21:
+ case IF_IFACE_X21D:
+ case IF_IFACE_T1:
+ case IF_IFACE_E1:
+ return fst_set_iface(card, port, ifr);
+
+ case IF_PROTO_RAW:
+ port->mode = FST_RAW;
+ return 0;
+
+ case IF_GET_PROTO:
+ if (port->mode == FST_RAW) {
+ ifr->ifr_settings.type = IF_PROTO_RAW;
+ return 0;
+ }
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ default:
+ port->mode = FST_GEN_HDLC;
+ dbg(DBG_IOCTL, "Passing this type to hdlc %x\n",
+ ifr->ifr_settings.type);
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
+
+ default:
+ /* Not one of ours. Pass through to HDLC package */
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
}
-
-static int
-fst_open ( struct net_device *dev )
+static void
+fst_openport(struct fst_port_info *port)
{
- int err;
+ int signals;
+ int txq_length;
- err = hdlc_open ( dev_to_hdlc ( dev ));
- if ( err )
- return err;
+ /* Only init things if card is actually running. This allows open to
+ * succeed for downloads etc.
+ */
+ if (port->card->state == FST_RUNNING) {
+ if (port->run) {
+ dbg(DBG_OPEN, "open: found port already running\n");
+
+ fst_issue_cmd(port, STOPPORT);
+ port->run = 0;
+ }
+
+ fst_rx_config(port);
+ fst_tx_config(port);
+ fst_op_raise(port, OPSTS_RTS | OPSTS_DTR);
+
+ fst_issue_cmd(port, STARTPORT);
+ port->run = 1;
+
+ signals = FST_RDL(port->card, v24DebouncedSts[port->index]);
+ if (signals & (((port->hwif == X21) || (port->hwif == X21D))
+ ? IPSTS_INDICATE : IPSTS_DCD))
+ netif_carrier_on(port_to_dev(port));
+ else
+ netif_carrier_off(port_to_dev(port));
+
+ txq_length = port->txqe - port->txqs;
+ port->txqe = 0;
+ port->txqs = 0;
+ }
- MOD_INC_USE_COUNT;
+}
- fst_openport ( dev_to_port ( dev ));
- netif_wake_queue ( dev );
- return 0;
+static void
+fst_closeport(struct fst_port_info *port)
+{
+ if (port->card->state == FST_RUNNING) {
+ if (port->run) {
+ port->run = 0;
+ fst_op_lower(port, OPSTS_RTS | OPSTS_DTR);
+
+ fst_issue_cmd(port, STOPPORT);
+ } else {
+ dbg(DBG_OPEN, "close: port not running\n");
+ }
+ }
}
static int
-fst_close ( struct net_device *dev )
+fst_open(struct net_device *dev)
{
- netif_stop_queue ( dev );
- fst_closeport ( dev_to_port ( dev ));
- hdlc_close ( dev_to_hdlc ( dev ));
- MOD_DEC_USE_COUNT;
- return 0;
+ int err;
+ struct fst_port_info *port;
+
+ port = dev_to_port(dev);
+ MOD_INC_USE_COUNT;
+ if (port->mode != FST_RAW) {
+ err = hdlc_open(dev_to_hdlc(dev));
+ if (err)
+ return err;
+ }
+
+ fst_openport(port);
+ netif_wake_queue(dev);
+ return 0;
}
static int
-fst_attach ( hdlc_device *hdlc, unsigned short encoding, unsigned short parity )
+fst_close(struct net_device *dev)
{
- /* Setting currently fixed in FarSync card so we check and forget */
- if ( encoding != ENCODING_NRZ || parity != PARITY_CRC16_PR1_CCITT )
- return -EINVAL;
- return 0;
+ struct fst_port_info *port;
+ struct fst_card_info *card;
+ unsigned char tx_dma_done;
+ unsigned char rx_dma_done;
+
+ port = dev_to_port(dev);
+ card = port->card;
+
+ tx_dma_done = inb(card->pci_conf + DMACSR1);
+ rx_dma_done = inb(card->pci_conf + DMACSR0);
+ dbg(DBG_OPEN,
+ "Port Close: tx_dma_in_progress = %d (%x) rx_dma_in_progress = %d (%x)\n",
+ card->dmatx_in_progress, tx_dma_done, card->dmarx_in_progress,
+ rx_dma_done);
+
+ netif_stop_queue(dev);
+ fst_closeport(dev_to_port(dev));
+ if (port->mode != FST_RAW) {
+ hdlc_close(dev_to_hdlc(dev));
+ }
+ MOD_DEC_USE_COUNT;
+ return 0;
}
+static int
+fst_attach(hdlc_device * hdlc, unsigned short encoding, unsigned short parity)
+{
+ /*
+ * Setting currently fixed in FarSync card so we check and forget
+ */
+ if (encoding != ENCODING_NRZ || parity != PARITY_CRC16_PR1_CCITT)
+ return -EINVAL;
+ return 0;
+}
static void
-fst_tx_timeout ( struct net_device *dev )
+fst_tx_timeout(struct net_device *dev)
{
- struct fst_port_info *port;
+ struct fst_port_info *port;
+ struct fst_card_info *card;
- dbg ( DBG_INTR | DBG_TX,"tx_timeout\n");
+ port = dev_to_port(dev);
+ card = port->card;
- port = dev_to_port ( dev );
-
- port->hdlc.stats.tx_errors++;
- port->hdlc.stats.tx_aborted_errors++;
-
- if ( port->txcnt > 0 )
- fst_issue_cmd ( port, ABORTTX );
-
- dev->trans_start = jiffies;
- netif_wake_queue ( dev );
+ port->hdlc.stats.tx_errors++;
+ port->hdlc.stats.tx_aborted_errors++;
+ dbg(DBG_ASS, "Tx timeout card %d port %d\n",
+ card->card_no, port->index);
+ fst_issue_cmd(port, ABORTTX);
+
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ port->start = 0;
}
-
static int
-fst_start_xmit ( struct sk_buff *skb, struct net_device *dev )
+fst_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct fst_card_info *card;
- struct fst_port_info *port;
- unsigned char dmabits;
- unsigned long flags;
- int pi;
- int txp;
-
- port = dev_to_port ( dev );
- card = port->card;
-
- /* Drop packet with error if we don't have carrier */
- if ( ! netif_carrier_ok ( dev ))
- {
- dev_kfree_skb ( skb );
- port->hdlc.stats.tx_errors++;
- port->hdlc.stats.tx_carrier_errors++;
- return 0;
- }
-
- /* Drop it if it's too big! MTU failure ? */
- if ( skb->len > LEN_TX_BUFFER )
- {
- dbg ( DBG_TX,"Packet too large %d vs %d\n", skb->len,
- LEN_TX_BUFFER );
- dev_kfree_skb ( skb );
- port->hdlc.stats.tx_errors++;
- return 0;
- }
-
- /* Check we have a buffer */
- pi = port->index;
- spin_lock_irqsave ( &card->card_lock, flags );
- txp = port->txpos;
- dmabits = FST_RDB ( card, txDescrRing[pi][txp].bits );
- if ( dmabits & DMA_OWN )
- {
- spin_unlock_irqrestore ( &card->card_lock, flags );
- dbg ( DBG_TX,"Out of Tx buffers\n");
- dev_kfree_skb ( skb );
- port->hdlc.stats.tx_errors++;
- return 0;
- }
- if ( ++port->txpos >= NUM_TX_BUFFER )
- port->txpos = 0;
-
- if ( ++port->txcnt >= NUM_TX_BUFFER )
- netif_stop_queue ( dev );
-
- /* Release the card lock before we copy the data as we now have
- * exclusive access to the buffer.
- */
- spin_unlock_irqrestore ( &card->card_lock, flags );
-
- /* Enqueue the packet */
- memcpy_toio ( card->mem + BUF_OFFSET ( txBuffer[pi][txp][0]),
- skb->data, skb->len );
- FST_WRW ( card, txDescrRing[pi][txp].bcnt, cnv_bcnt ( skb->len ));
- FST_WRB ( card, txDescrRing[pi][txp].bits, DMA_OWN | TX_STP | TX_ENP );
+ struct fst_card_info *card;
+ struct fst_port_info *port;
+ unsigned long flags;
+ int txq_length;
+
+ port = dev_to_port(dev);
+ card = port->card;
+ dbg(DBG_TX, "fst_start_xmit: length = %d\n", skb->len);
+
+ /* Drop packet with error if we don't have carrier */
+ if (!netif_carrier_ok(dev)) {
+ dev_kfree_skb(skb);
+ port->hdlc.stats.tx_errors++;
+ port->hdlc.stats.tx_carrier_errors++;
+ dbg(DBG_ASS,
+ "Tried to transmit but no carrier on card %d port %d\n",
+ card->card_no, port->index);
+ return 0;
+ }
- port->hdlc.stats.tx_packets++;
- port->hdlc.stats.tx_bytes += skb->len;
+ /* Drop it if it's too big! MTU failure ? */
+ if (skb->len > LEN_TX_BUFFER) {
+ dbg(DBG_ASS, "Packet too large %d vs %d\n", skb->len,
+ LEN_TX_BUFFER);
+ dev_kfree_skb(skb);
+ port->hdlc.stats.tx_errors++;
+ return 0;
+ }
- dev_kfree_skb ( skb );
+ /*
+ * We are always going to queue the packet
+ * so that the bottom half is the only place we tx from
+ * Check there is room in the port txq
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ if ((txq_length = port->txqe - port->txqs) < 0) {
+ /*
+ * This is the case where the next free has wrapped but the
+ * last used hasn't
+ */
+ txq_length = txq_length + FST_TXQ_DEPTH;
+ }
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ if (txq_length > fst_txq_high) {
+ /*
+ * We have got enough buffers in the pipeline. Ask the network
+ * layer to stop sending frames down
+ */
+ netif_stop_queue(dev);
+ port->start = 1; /* I'm using this to signal stop sent up */
+ }
- dev->trans_start = jiffies;
- return 0;
-}
+ if (txq_length == FST_TXQ_DEPTH - 1) {
+ /*
+ * This shouldn't have happened but such is life
+ */
+ dev_kfree_skb(skb);
+ port->hdlc.stats.tx_errors++;
+ dbg(DBG_ASS, "Tx queue overflow card %d port %d\n",
+ card->card_no, port->index);
+ return 0;
+ }
+ /*
+ * queue the buffer
+ */
+ spin_lock_irqsave(&card->card_lock, flags);
+ port->txq[port->txqe] = skb;
+ port->txqe++;
+ if (port->txqe == FST_TXQ_DEPTH)
+ port->txqe = 0;
+ spin_unlock_irqrestore(&card->card_lock, flags);
+
+ /* Scehdule the bottom half which now does transmit processing */
+ fst_q_work_item(&fst_work_txq, card->card_no);
+ tasklet_schedule(&fst_tx_task);
+
+ return 0;
+}
/*
* Card setup having checked hardware resources.
@@ -1441,256 +2382,302 @@
* disabled.
*/
static char *type_strings[] __devinitdata = {
- "no hardware", /* Should never be seen */
- "FarSync T2P",
- "FarSync T4P"
+ "no hardware", /* Should never be seen */
+ "FarSync T2P",
+ "FarSync T4P",
+ "FarSync T1U",
+ "FarSync T2U",
+ "FarSync T4U",
+ "FarSync TE1"
};
static void __devinit
-fst_init_card ( struct fst_card_info *card )
+fst_init_card(struct fst_card_info *card)
{
- int i;
- int err;
- struct net_device *dev;
-
- /* We're working on a number of ports based on the card ID. If the
- * firmware detects something different later (should never happen)
- * we'll have to revise it in some way then.
- */
- for ( i = 0 ; i < card->nports ; i++ )
- {
- card->ports[i].card = card;
- card->ports[i].index = i;
- card->ports[i].run = 0;
-
- dev = hdlc_to_dev ( &card->ports[i].hdlc );
-
- /* Fill in the net device info */
- /* Since this is a PCI setup this is purely
- * informational. Give them the buffer addresses
- * and basic card I/O.
- */
- dev->mem_start = card->phys_mem
- + BUF_OFFSET ( txBuffer[i][0][0]);
- dev->mem_end = card->phys_mem
- + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]);
- dev->rmem_start = card->phys_mem
- + BUF_OFFSET ( rxBuffer[i][0][0]);
- dev->rmem_end = card->phys_mem
- + BUF_OFFSET ( rxBuffer[i][NUM_RX_BUFFER][0]);
- dev->base_addr = card->pci_conf;
- dev->irq = card->irq;
-
- dev->tx_queue_len = FST_TX_QUEUE_LEN;
- dev->open = fst_open;
- dev->stop = fst_close;
- dev->do_ioctl = fst_ioctl;
- dev->watchdog_timeo = FST_TX_TIMEOUT;
- dev->tx_timeout = fst_tx_timeout;
- card->ports[i].hdlc.attach = fst_attach;
- card->ports[i].hdlc.xmit = fst_start_xmit;
-
- if (( err = register_hdlc_device ( &card->ports[i].hdlc )) < 0 )
- {
- printk_err ("Cannot register HDLC device for port %d"
- " (errno %d)\n", i, -err );
- card->nports = i;
- break;
- }
- }
-
- spin_lock_init ( &card->card_lock );
-
- printk ( KERN_INFO "%s-%s: %s IRQ%d, %d ports\n",
- hdlc_to_dev(&card->ports[0].hdlc)->name,
- hdlc_to_dev(&card->ports[card->nports-1].hdlc)->name,
- type_strings[card->type], card->irq, card->nports );
-}
+ int i;
+ int err;
+ struct net_device *dev;
+
+ /* We're working on a number of ports based on the card ID. If the
+ * firmware detects something different later (should never happen)
+ * we'll have to revise it in some way then.
+ */
+ for (i = 0; i < card->nports; i++) {
+ card->ports[i].card = card;
+ card->ports[i].index = i;
+ card->ports[i].run = 0;
+ card->ports[i].mode = FST_GEN_HDLC;
+
+ dev = hdlc_to_dev(&card->ports[i].hdlc);
+
+ /* Fill in the net device info
+ * Since this is a PCI setup this is purely
+ * informational. Give them the buffer addresses
+ * and basic card I/O.
+ */
+ dev->mem_start = card->phys_mem + BUF_OFFSET(txBuffer[i][0][0]);
+ dev->mem_end = card->phys_mem
+ + BUF_OFFSET(txBuffer[i][NUM_TX_BUFFER][0]);
+ dev->base_addr = card->pci_conf;
+ dev->irq = card->irq;
+
+ dev->tx_queue_len = FST_TX_QUEUE_LEN;
+ dev->open = fst_open;
+ dev->stop = fst_close;
+ dev->do_ioctl = fst_ioctl;
+ dev->watchdog_timeo = FST_TX_TIMEOUT;
+ dev->tx_timeout = fst_tx_timeout;
+ card->ports[i].hdlc.attach = fst_attach;
+ card->ports[i].hdlc.xmit = fst_start_xmit;
+
+ if ((err = register_hdlc_device(&card->ports[i].hdlc)) < 0) {
+ printk_err("Cannot register HDLC device for port %d"
+ " (errno %d)\n", i, -err);
+ card->nports = i;
+ break;
+ }
+ }
+ spin_lock_init(&card->card_lock);
+
+ printk_info("%s-%s: %s IRQ%d, %d ports\n",
+ hdlc_to_dev(&card->ports[0].hdlc)->name,
+ hdlc_to_dev(&card->ports[card->nports - 1].hdlc)->name,
+ type_strings[card->type], card->irq, card->nports);
+}
/*
* Initialise card when detected.
* Returns 0 to indicate success, or errno otherwise.
*/
static int __devinit
-fst_add_one ( struct pci_dev *pdev, const struct pci_device_id *ent )
+fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int firsttime_done = 0;
- struct fst_card_info *card;
- int err = 0;
-
- if ( ! firsttime_done )
- {
- printk ( KERN_INFO "FarSync X21 driver " FST_USER_VERSION
- " (c) 2001 FarSite Communications Ltd.\n");
- firsttime_done = 1;
- }
-
- /* Allocate driver private data */
- card = kmalloc ( sizeof ( struct fst_card_info ), GFP_KERNEL);
- if (card == NULL)
- {
- printk_err ("FarSync card found but insufficient memory for"
- " driver storage\n");
- return -ENOMEM;
- }
- memset ( card, 0, sizeof ( struct fst_card_info ));
-
- /* Record info we need*/
- card->irq = pdev->irq;
- card->pci_conf = pci_resource_start ( pdev, 1 );
- card->phys_mem = pci_resource_start ( pdev, 2 );
- card->phys_ctlmem = pci_resource_start ( pdev, 3 );
-
- card->type = ent->driver_data;
- card->nports = ( ent->driver_data == FST_TYPE_T2P ) ? 2 : 4;
-
- card->state = FST_UNINIT;
-
- dbg ( DBG_PCI,"type %d nports %d irq %d\n", card->type,
- card->nports, card->irq );
- dbg ( DBG_PCI,"conf %04x mem %08x ctlmem %08x\n",
- card->pci_conf, card->phys_mem, card->phys_ctlmem );
-
- /* Check we can get access to the memory and I/O regions */
- if ( ! request_region ( card->pci_conf, 0x80,"PLX config regs"))
- {
- printk_err ("Unable to get config I/O @ 0x%04X\n",
- card->pci_conf );
- err = -ENODEV;
- goto error_free_card;
- }
- if ( ! request_mem_region ( card->phys_mem, FST_MEMSIZE,"Shared RAM"))
- {
- printk_err ("Unable to get main memory @ 0x%08X\n",
- card->phys_mem );
- err = -ENODEV;
- goto error_release_io;
- }
- if ( ! request_mem_region ( card->phys_ctlmem, 0x10,"Control memory"))
- {
- printk_err ("Unable to get control memory @ 0x%08X\n",
- card->phys_ctlmem );
- err = -ENODEV;
- goto error_release_mem;
- }
-
- /* Try to enable the device */
- if (( err = pci_enable_device ( pdev )) != 0 )
- {
- printk_err ("Failed to enable card. Err %d\n", -err );
- goto error_release_ctlmem;
- }
-
- /* Get virtual addresses of memory regions */
- if (( card->mem = ioremap ( card->phys_mem, FST_MEMSIZE )) == NULL )
- {
- printk_err ("Physical memory remap failed\n");
- err = -ENODEV;
- goto error_release_ctlmem;
- }
- if (( card->ctlmem = ioremap ( card->phys_ctlmem, 0x10 )) == NULL )
- {
- printk_err ("Control memory remap failed\n");
- err = -ENODEV;
- goto error_unmap_mem;
- }
- dbg ( DBG_PCI,"kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem);
-
- /* Reset the card's processor */
- fst_cpureset ( card );
- card->state = FST_RESET;
-
- /* Register the interrupt handler */
- if ( request_irq ( card->irq, fst_intr, SA_SHIRQ, FST_DEV_NAME, card ))
- {
-
- printk_err ("Unable to register interrupt %d\n", card->irq );
- err = -ENODEV;
- goto error_unmap_ctlmem;
- }
-
- /* Record driver data for later use */
- pci_set_drvdata(pdev, card);
-
- /* Remainder of card setup */
- fst_init_card ( card );
-
- return 0; /* Success */
-
-
- /* Failure. Release resources */
-error_unmap_ctlmem:
- iounmap ( card->ctlmem );
-
-error_unmap_mem:
- iounmap ( card->mem );
-
-error_release_ctlmem:
- release_mem_region ( card->phys_ctlmem, 0x10 );
-
-error_release_mem:
- release_mem_region ( card->phys_mem, FST_MEMSIZE );
-
-error_release_io:
- release_region ( card->pci_conf, 0x80 );
-
-error_free_card:
- kfree ( card );
- return err;
-}
+ static int firsttime_done = 0;
+ static int no_of_cards_added = 0;
+ struct fst_card_info *card;
+ int err = 0;
+ int i;
+
+ if (!firsttime_done) {
+ printk_info("FarSync WAN driver " FST_USER_VERSION
+ " (c) 2001-2004 FarSite Communications Ltd.\n");
+ firsttime_done = 1;
+ dbg(DBG_ASS, "The value of debug mask is %x\n", fst_debug_mask);
+ }
+
+ /*
+ * We are going to be clever and allow certain cards not to be
+ * configured. An exclude list can be provided in /etc/modules.conf
+ */
+ if (fst_excluded_cards != 0) {
+ /*
+ * There are cards to exclude
+ *
+ */
+ for (i = 0; i < fst_excluded_cards; i++) {
+ if ((pdev->devfn) >> 3 == fst_excluded_list[i]) {
+ printk_info("FarSync PCI device %d not assigned\n",
+ (pdev->devfn) >> 3);
+ return -EBUSY;
+ }
+ }
+ }
+
+ /* Allocate driver private data */
+ card = kmalloc(sizeof (struct fst_card_info), GFP_KERNEL);
+ if (card == NULL) {
+ printk_err("FarSync card found but insufficient memory for"
+ " driver storage\n");
+ return -ENOMEM;
+ }
+ memset(card, 0, sizeof (struct fst_card_info));
+
+ /* Try to enable the device */
+ if ((err = pci_enable_device(pdev)) != 0) {
+ printk_err("Failed to enable card. Err %d\n", -err);
+ kfree(card);
+ return err;
+ }
+ if ((err = pci_request_regions(pdev, "FarSync")) !=0) {
+ printk_err("Failed to allocate regions. Err %d\n", -err);
+ pci_disable_device(pdev);
+ kfree(card);
+ return err;
+ }
+
+ /* Get virtual addresses of memory regions */
+ card->pci_conf = pci_resource_start(pdev, 1);
+ card->phys_mem = pci_resource_start(pdev, 2);
+ card->phys_ctlmem = pci_resource_start(pdev, 3);
+ if ((card->mem = ioremap(card->phys_mem, FST_MEMSIZE)) == NULL) {
+ printk_err("Physical memory remap failed\n");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ kfree(card);
+ return -ENODEV;
+ }
+ if ((card->ctlmem = ioremap(card->phys_ctlmem, 0x10)) == NULL) {
+ printk_err("Control memory remap failed\n");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ kfree(card);
+ return -ENODEV;
+ }
+ dbg(DBG_PCI, "kernel mem %p, ctlmem %p\n", card->mem, card->ctlmem);
+
+ /* Register the interrupt handler */
+ if (request_irq(pdev->irq, fst_intr, SA_SHIRQ, FST_DEV_NAME, card)) {
+ printk_err("Unable to register interrupt %d\n", card->irq);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ iounmap(card->ctlmem);
+ iounmap(card->mem);
+ kfree(card);
+ return -ENODEV;
+ }
+
+ /* Record info we need */
+ card->irq = pdev->irq;
+ card->type = ent->driver_data;
+ card->family = ((ent->driver_data == FST_TYPE_T2P) ||
+ (ent->driver_data == FST_TYPE_T4P))
+ ? FST_FAMILY_TXP : FST_FAMILY_TXU;
+ if ((ent->driver_data == FST_TYPE_T1U) ||
+ (ent->driver_data == FST_TYPE_TE1))
+ card->nports = 1;
+ else
+ card->nports = ((ent->driver_data == FST_TYPE_T2P) ||
+ (ent->driver_data == FST_TYPE_T2U)) ? 2 : 4;
+
+ card->state = FST_UNINIT;
+ card->device = pdev;
+
+ dbg(DBG_PCI, "type %d nports %d irq %d\n", card->type,
+ card->nports, card->irq);
+ dbg(DBG_PCI, "conf %04x mem %08x ctlmem %08x\n",
+ card->pci_conf, card->phys_mem, card->phys_ctlmem);
+
+ /* Reset the card's processor */
+ fst_cpureset(card);
+ card->state = FST_RESET;
+
+ /* Initialise DMA (if required) */
+ fst_init_dma(card);
+
+ /* Record driver data for later use */
+ pci_set_drvdata(pdev, card);
+
+ /* Remainder of card setup */
+ fst_card_array[no_of_cards_added] = card;
+ card->card_no = no_of_cards_added++; /* Record instance and bump it */
+ fst_init_card(card);
+ if (card->family == FST_FAMILY_TXU) {
+ /*
+ * Allocate a dma buffer for transmit and receives
+ */
+ card->rx_dma_handle_host =
+ pci_alloc_consistent(card->device, FST_MAX_MTU,
+ &card->rx_dma_handle_card);
+ if (card->rx_dma_handle_host == NULL) {
+ printk_err("Could not allocate rx dma buffer\n");
+ fst_disable_intr(card);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ iounmap(card->ctlmem);
+ iounmap(card->mem);
+ kfree(card);
+ return -ENOMEM;
+ }
+ card->tx_dma_handle_host =
+ pci_alloc_consistent(card->device, FST_MAX_MTU,
+ &card->tx_dma_handle_card);
+ if (card->tx_dma_handle_host == NULL) {
+ printk_err("Could not allocate tx dma buffer\n");
+ fst_disable_intr(card);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ iounmap(card->ctlmem);
+ iounmap(card->mem);
+ kfree(card);
+ return -ENOMEM;
+ }
+ }
+ return 0; /* Success */
+}
/*
* Cleanup and close down a card
*/
static void __devexit
-fst_remove_one ( struct pci_dev *pdev )
+fst_remove_one(struct pci_dev *pdev)
{
- struct fst_card_info *card;
- int i;
-
- card = pci_get_drvdata(pdev);
+ struct fst_card_info *card;
+ int i;
- for ( i = 0 ; i < card->nports ; i++ )
- {
- unregister_hdlc_device ( &card->ports[i].hdlc );
- }
+ card = pci_get_drvdata(pdev);
- fst_disable_intr ( card );
- free_irq ( card->irq, card );
+ for (i = 0; i < card->nports; i++) {
+ unregister_hdlc_device(&card->ports[i].hdlc);
+ }
- iounmap ( card->ctlmem );
- iounmap ( card->mem );
+ fst_disable_intr(card);
+ free_irq(card->irq, card);
- release_mem_region ( card->phys_ctlmem, 0x10 );
- release_mem_region ( card->phys_mem, FST_MEMSIZE );
- release_region ( card->pci_conf, 0x80 );
+ iounmap(card->ctlmem);
+ iounmap(card->mem);
- kfree ( card );
+ pci_release_regions(pdev);
+#if 0
+ release_mem_region(card->phys_ctlmem, 0x10);
+ release_mem_region(card->phys_mem, FST_MEMSIZE);
+ if (card->family == FST_FAMILY_TXU) {
+ release_region(card->pci_conf, 0x100);
+ } else {
+ release_region(card->pci_conf, 0x80);
+ }
+#endif
+ if (card->family == FST_FAMILY_TXU) {
+ /*
+ * Free dma buffers
+ */
+ pci_free_consistent(card->device, FST_MAX_MTU,
+ card->rx_dma_handle_host,
+ card->rx_dma_handle_card);
+ pci_free_consistent(card->device, FST_MAX_MTU,
+ card->tx_dma_handle_host,
+ card->tx_dma_handle_card);
+ }
+ fst_card_array[card->card_no] = NULL;
}
static struct pci_driver fst_driver = {
- name: FST_NAME,
- id_table: fst_pci_dev_id,
- probe: fst_add_one,
- remove: __devexit_p(fst_remove_one),
- suspend: NULL,
- resume: NULL,
+ name:FST_NAME,
+ id_table:fst_pci_dev_id,
+ probe:fst_add_one,
+ remove:__devexit_p(fst_remove_one),
+ suspend:NULL,
+ resume:NULL,
};
static int __init
fst_init(void)
{
- return pci_module_init ( &fst_driver );
+ int i;
+
+ for (i = 0; i < FST_MAX_CARDS; i++)
+ fst_card_array[i] = NULL;
+ spin_lock_init(&fst_work_q_lock);
+ return pci_module_init(&fst_driver);
}
static void __exit
fst_cleanup_module(void)
{
- pci_unregister_driver ( &fst_driver );
+ printk_info("FarSync WAN driver unloading\n");
+ pci_unregister_driver(&fst_driver);
}
-module_init ( fst_init );
-module_exit ( fst_cleanup_module );
-
+module_init(fst_init);
+module_exit(fst_cleanup_module);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)