patch-2.4.27 linux-2.4.27/drivers/scsi/sata_svw.c

• Lines: 416
• Date: 2004-08-07 16:26:05.528382690 -0700
• Orig file: linux-2.4.26/drivers/scsi/sata_svw.c
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.26/drivers/scsi/sata_svw.c linux-2.4.27/drivers/scsi/sata_svw.c
@@ -0,0 +1,415 @@
+/*
+ *  sata_svw.c - ServerWorks / Apple K2 SATA
+ *
+ *  Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and
+ *		   Jeff Garzik <jgarzik@pobox.com>
+ *  		    Please ALWAYS copy linux-ide@vger.kernel.org
+ *		    on emails.
+ *
+ *  Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ *  Bits from Jeff Garzik, Copyright RedHat, Inc.
+ *
+ *  This driver probably works with non-Apple versions of the
+ *  Broadcom chipset...
+ *
+ *  The contents of this file are subject to the Open
+ *  Software License version 1.1 that can be found at
+ *  http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ *  by reference.
+ *
+ *  Alternatively, the contents of this file may be used under the terms
+ *  of the GNU General Public License version 2 (the "GPL") as distributed
+ *  in the kernel source COPYING file, in which case the provisions of
+ *  the GPL are applicable instead of the above.  If you wish to allow
+ *  the use of your version of this file only under the terms of the
+ *  GPL and not to allow others to use your version of this file under
+ *  the OSL, indicate your decision by deleting the provisions above and
+ *  replace them with the notice and other provisions required by the GPL.
+ *  If you do not delete the provisions above, a recipient may use your
+ *  version of this file under either the OSL or the GPL.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#ifdef CONFIG_PPC_OF
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#endif /* CONFIG_PPC_OF */
+
+#define DRV_NAME	"sata_svw"
+#define DRV_VERSION	"1.04"
+
+/* Taskfile registers offsets */
+#define K2_SATA_TF_CMD_OFFSET		0x00
+#define K2_SATA_TF_DATA_OFFSET		0x00
+#define K2_SATA_TF_ERROR_OFFSET		0x04
+#define K2_SATA_TF_NSECT_OFFSET		0x08
+#define K2_SATA_TF_LBAL_OFFSET		0x0c
+#define K2_SATA_TF_LBAM_OFFSET		0x10
+#define K2_SATA_TF_LBAH_OFFSET		0x14
+#define K2_SATA_TF_DEVICE_OFFSET	0x18
+#define K2_SATA_TF_CMDSTAT_OFFSET      	0x1c
+#define K2_SATA_TF_CTL_OFFSET		0x20
+
+/* DMA base */
+#define K2_SATA_DMA_CMD_OFFSET		0x30
+
+/* SCRs base */
+#define K2_SATA_SCR_STATUS_OFFSET	0x40
+#define K2_SATA_SCR_ERROR_OFFSET	0x44
+#define K2_SATA_SCR_CONTROL_OFFSET	0x48
+
+/* Others */
+#define K2_SATA_SICR1_OFFSET		0x80
+#define K2_SATA_SICR2_OFFSET		0x84
+#define K2_SATA_SIM_OFFSET		0x88
+
+/* Port stride */
+#define K2_SATA_PORT_OFFSET		0x100
+
+
+static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+	if (sc_reg > SCR_CONTROL)
+		return 0xffffffffU;
+	return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
+			       u32 val)
+{
+	if (sc_reg > SCR_CONTROL)
+		return;
+	writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		writeb(tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
+		writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
+		writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
+		writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
+		writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+	} else if (is_addr) {
+		writew(tf->feature, ioaddr->feature_addr);
+		writew(tf->nsect, ioaddr->nsect_addr);
+		writew(tf->lbal, ioaddr->lbal_addr);
+		writew(tf->lbam, ioaddr->lbam_addr);
+		writew(tf->lbah, ioaddr->lbah_addr);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE)
+		writeb(tf->device, ioaddr->device_addr);
+
+	ata_wait_idle(ap);
+}
+
+
+static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u16 nsect, lbal, lbam, lbah;
+
+	nsect = tf->nsect = readw(ioaddr->nsect_addr);
+	lbal = tf->lbal = readw(ioaddr->lbal_addr);
+	lbam = tf->lbam = readw(ioaddr->lbam_addr);
+	lbah = tf->lbah = readw(ioaddr->lbah_addr);
+	tf->device = readw(ioaddr->device_addr);
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+		tf->hob_nsect = nsect >> 8;
+		tf->hob_lbal = lbal >> 8;
+		tf->hob_lbam = lbam >> 8;
+		tf->hob_lbah = lbah >> 8;
+        }
+}
+
+
+static u8 k2_stat_check_status(struct ata_port *ap)
+{
+       	return readl((void *) ap->ioaddr.status_addr);
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * k2_sata_proc_info
+ * inout : decides on the direction of the dataflow and the meaning of the
+ *	   variables
+ * buffer: If inout==FALSE data is being written to it else read from it
+ * *start: If inout==FALSE start of the valid data in the buffer
+ * offset: If inout==FALSE offset from the beginning of the imaginary file
+ *	   from which we start writing into the buffer
+ * length: If inout==FALSE max number of bytes to be written into the buffer
+ *	   else number of bytes in the buffer
+ */
+static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
+			     off_t offset, int count, int inout)
+{
+	struct ata_port *ap;
+	struct device_node *np;
+	int len, index;
+
+	/* Find  the ata_port */
+	ap = (struct ata_port *) &shost->hostdata[0];
+	if (ap == NULL)
+		return 0;
+
+	/* Find the OF node for the PCI device proper */
+	np = pci_device_to_OF_node(ap->host_set->pdev);
+	if (np == NULL)
+		return 0;
+
+	/* Match it to a port node */
+	index = (ap == ap->host_set->ports[0]) ? 0 : 1;
+	for (np = np->child; np != NULL; np = np->sibling) {
+		u32 *reg = (u32 *)get_property(np, "reg", NULL);
+		if (!reg)
+			continue;
+		if (index == *reg)
+			break;
+	}
+	if (np == NULL)
+		return 0;
+
+	len = sprintf(page, "devspec: %s\n", np->full_name);
+
+	return len;
+}
+#endif /* CONFIG_PPC_OF */
+
+
+static Scsi_Host_Template k2_sata_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.detect			= ata_scsi_detect,
+	.release		= ata_scsi_release,
+	.queuecommand		= ata_scsi_queuecmd,
+	.eh_strategy_handler	= ata_scsi_error,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.use_new_eh_code	= ATA_SHT_NEW_EH_CODE,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+#ifdef CONFIG_PPC_OF
+	.proc_info		= k2_sata_proc_info,
+#endif
+	.bios_param		= ata_std_bios_param,
+};
+
+
+static struct ata_port_operations k2_sata_ops = {
+	.port_disable		= ata_port_disable,
+	.tf_load		= k2_sata_tf_load,
+	.tf_read		= k2_sata_tf_read,
+	.check_status		= k2_stat_check_status,
+	.exec_command		= ata_exec_command_mmio,
+	.phy_reset		= sata_phy_reset,
+	.bmdma_setup            = ata_bmdma_setup_mmio,
+	.bmdma_start            = ata_bmdma_start_mmio,
+	.fill_sg		= ata_fill_sg,
+	.eng_timeout		= ata_eng_timeout,
+	.irq_handler		= ata_interrupt,
+	.scr_read		= k2_sata_scr_read,
+	.scr_write		= k2_sata_scr_write,
+	.port_start		= ata_port_start,
+	.port_stop		= ata_port_stop,
+};
+
+static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+	port->cmd_addr		= base + K2_SATA_TF_CMD_OFFSET;
+	port->data_addr		= base + K2_SATA_TF_DATA_OFFSET;
+	port->feature_addr	=
+	port->error_addr	= base + K2_SATA_TF_ERROR_OFFSET;
+	port->nsect_addr	= base + K2_SATA_TF_NSECT_OFFSET;
+	port->lbal_addr		= base + K2_SATA_TF_LBAL_OFFSET;
+	port->lbam_addr		= base + K2_SATA_TF_LBAM_OFFSET;
+	port->lbah_addr		= base + K2_SATA_TF_LBAH_OFFSET;
+	port->device_addr	= base + K2_SATA_TF_DEVICE_OFFSET;
+	port->command_addr	=
+	port->status_addr	= base + K2_SATA_TF_CMDSTAT_OFFSET;
+	port->altstatus_addr	=
+	port->ctl_addr		= base + K2_SATA_TF_CTL_OFFSET;
+	port->bmdma_addr	= base + K2_SATA_DMA_CMD_OFFSET;
+	port->scr_addr		= base + K2_SATA_SCR_STATUS_OFFSET;
+}
+
+
+static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static int printed_version;
+	struct ata_probe_ent *probe_ent = NULL;
+	unsigned long base;
+	void *mmio_base;
+	int rc;
+
+	if (!printed_version++)
+		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+	/*
+	 * If this driver happens to only be useful on Apple's K2, then
+	 * we should check that here as it has a normal Serverworks ID
+	 */
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+	/*
+	 * Check if we have resources mapped at all (second function may
+	 * have been disabled by firmware)
+	 */
+	if (pci_resource_len(pdev, 5) == 0)
+		return -ENODEV;
+
+	/* Request PCI regions */
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out;
+
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		goto err_out_regions;
+
+	probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+	if (probe_ent == NULL) {
+		rc = -ENOMEM;
+		goto err_out_regions;
+	}
+
+	memset(probe_ent, 0, sizeof(*probe_ent));
+	probe_ent->pdev = pdev;
+	INIT_LIST_HEAD(&probe_ent->node);
+
+	mmio_base = ioremap(pci_resource_start(pdev, 5),
+		            pci_resource_len(pdev, 5));
+	if (mmio_base == NULL) {
+		rc = -ENOMEM;
+		goto err_out_free_ent;
+	}
+	base = (unsigned long) mmio_base;
+
+	/* Clear a magic bit in SCR1 according to Darwin, those help
+	 * some funky seagate drives (though so far, those were already
+	 * set by the firmware on the machines I had access to
+	 */
+	writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
+	       mmio_base + K2_SATA_SICR1_OFFSET);
+
+	/* Clear SATA error & interrupts we don't use */
+	writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
+	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
+
+	probe_ent->sht = &k2_sata_sht;
+	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
+				ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+	probe_ent->port_ops = &k2_sata_ops;
+	probe_ent->n_ports = 4;
+	probe_ent->irq = pdev->irq;
+	probe_ent->irq_flags = SA_SHIRQ;
+	probe_ent->mmio_base = mmio_base;
+
+	/* We don't care much about the PIO/UDMA masks, but the core won't like us
+	 * if we don't fill these
+	 */
+	probe_ent->pio_mask = 0x1f;
+	probe_ent->udma_mask = 0x7f;
+
+	/* We have 4 ports per PCI function */
+	k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET);
+	k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET);
+	k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET);
+	k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET);
+
+	pci_set_master(pdev);
+
+	ata_add_to_probe_list(probe_ent);
+
+	return 0;
+
+err_out_free_ent:
+	kfree(probe_ent);
+err_out_regions:
+	pci_release_regions(pdev);
+err_out:
+	pci_disable_device(pdev);
+	return rc;
+}
+
+
+static struct pci_device_id k2_sata_pci_tbl[] = {
+	{ 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ }
+};
+
+
+static struct pci_driver k2_sata_pci_driver = {
+	.name			= DRV_NAME,
+	.id_table		= k2_sata_pci_tbl,
+	.probe			= k2_sata_init_one,
+	.remove			= ata_pci_remove_one,
+};
+
+
+static int __init k2_sata_init(void)
+{
+	int rc;
+
+	rc = pci_module_init(&k2_sata_pci_driver);
+	if (rc)
+		return rc;
+
+	rc = scsi_register_module(MODULE_SCSI_HA, &k2_sata_sht);
+	if (rc) {
+		rc = -ENODEV;
+		goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	pci_unregister_driver(&k2_sata_pci_driver);
+	return rc;
+}
+
+
+static void __exit k2_sata_exit(void)
+{
+	scsi_unregister_module(MODULE_SCSI_HA, &k2_sata_sht);
+	pci_unregister_driver(&k2_sata_pci_driver);
+}
+
+
+MODULE_AUTHOR("Benjamin Herrenschmidt");
+MODULE_DESCRIPTION("low-level driver for K2 SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl);
+
+module_init(k2_sata_init);
+module_exit(k2_sata_exit);