Guide to the Secure Configuration of Red Hat Enterprise Linux 7 (PCI-DSS centric)

with profile PCI-DSS v3.2.1 Control Baseline for Red Hat Enterprise Linux 7
Ensures PCI-DSS v3.2.1 security configuration settings are applied.
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 7. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.
Profile TitlePCI-DSS v3.2.1 Control Baseline for Red Hat Enterprise Linux 7
Profile IDxccdf_org.ssgproject.content_profile_pci-dss_centric

Revision History

Current version: 0.1.57

  • draft (as of 2021-07-13)

Platforms

  • cpe:/o:redhat:enterprise_linux:7
  • cpe:/o:redhat:enterprise_linux:7::server
  • cpe:/o:redhat:enterprise_linux:7::client
  • cpe:/o:redhat:enterprise_linux:7::computenode
  • cpe:/o:redhat:enterprise_linux:7::workstation

Table of Contents

  1. 2.
    1. 2.1
    2. 2.2
    3. 2.3
    4. 2.4
    5. 2.5
    6. 2.6
  2. 3.
    1. 3.1
    2. 3.2
    3. 3.3
    4. 3.4
    5. 3.5
    6. 3.6
    7. 3.7
  3. 4.
    1. 4.1
    2. 4.2
    3. 4.3
  4. 5.
    1. 5.1
    2. 5.2
    3. 5.3
    4. 5.4
  5. 6.
    1. 6.1
    2. 6.2
    3. 6.3
    4. 6.4
    5. 6.5
    6. 6.6
    7. 6.7
  6. 7.
    1. 7.1
    2. 7.2
    3. 7.3
  7. 8.
    1. 8.1
    2. 8.2
    3. 8.3
    4. 8.4
    5. 8.5
    6. 8.6
    7. 8.7
    8. 8.8
  8. 10.
    1. 10.1
    2. 10.2
    3. 10.3
    4. 10.4
    5. 10.5
    6. 10.6
    7. 10.7
    8. 10.8
  9. 11.
    1. 11.1
    2. 11.2
    3. 11.3
    4. 11.4
    5. 11.5
    6. 11.6
  10. Values
  11. Non PCI-DSS

Checklist

contains 96 rules

2.   [ref]group

Do not use vendor-supplied defaults for system passwords and other

2.1   [ref]group

Always change vendor-supplied

2.1.1   [ref]group

For wireless environments

2.1.1.a   [ref]group

Interview responsible personnel and examine

2.1.1.b   [ref]group

Interview personnel and examine policies and

2.1.1.c   [ref]group

Examine vendor documentation and login to

2.1.1.d   [ref]group

Examine vendor documentation and observe

2.1.1.e   [ref]group

Examine vendor documentation and observe

2.1.a   [ref]group

Choose a sample of system components, and attempt

2.1.b   [ref]group

For the sample of system components, verify that all

2.1.c   [ref]group

Interview personnel and examine supporting

2.2   [ref]group

Develop configuration standards for

2.2.1   [ref]group

Implement only one primary

2.2.1.a   [ref]group

Select a sample of system components and

2.2.1.b   [ref]group

If virtualization technologies are used, inspect the

2.2.2   [ref]group

Enable only necessary services,

2.2.2.a   [ref]group

Select a sample of system components and

2.2.2.b   [ref]group

Identify any enabled insecure services, daemons,

2.2.3   [ref]group

Implement additional security

2.2.3.a   [ref]group

Inspect configuration settings to verify that security

2.2.4   [ref]group

Configure system security

2.2.4.a   [ref]group

Interview system administrators and/or security

2.2.4.b   [ref]group

Examine the system configuration standards to

2.2.4.c   [ref]group

Select a sample of system components and

2.2.5   [ref]group

Remove all unnecessary

2.2.5.a   [ref]group

Select a sample of system components and

2.2.5.b   [ref]group

. Examine the documentation and security

2.2.5.c   [ref]group

. Examine the documentation and security

2.2.a   [ref]group

2.2.b   [ref]group

Examine policies and interview personnel to

2.2.c   [ref]group

Examine policies and interview personnel to

2.2.d   [ref]group

Verify that system configuration standards include the

2.3   [ref]group

Encrypt all non-console

2.3.a   [ref]group

Observe an administrator log on to each system and

2.3.b   [ref]group

Review services and parameter files on systems to

2.3.c   [ref]group

Observe an administrator log on to each system to

2.3.d   [ref]group

Examine vendor documentation and interview

2.4   [ref]group

Maintain an inventory of system

2.4.a   [ref]group

Examine system inventory to verify that a list of

2.4.b   [ref]group

Interview personnel to verify the documented inventory

2.5   [ref]group

Ensure that security policies and

2.6   [ref]group

Shared hosting providers must

3.   [ref]group

Protect stored cardholder data

3.1   [ref]group

Keep cardholder data storage to a

3.1.a   [ref]group

Examine the data retention and disposal policies,

3.1.b   [ref]group

Interview personnel to verify that:

3.1.c   [ref]group

For a sample of system components that store cardholder

3.2   [ref]group

Do not store sensitive authentication

3.2.1   [ref]group

Do not store the full contents of

3.2.2   [ref]group

Do not store the card verification

3.2.3   [ref]group

Do not store the personal

3.2.a   [ref]group

For issuers and/or companies that support issuing

3.2.b   [ref]group

For issuers and/or companies that support issuing

3.2.c   [ref]group

For all other entities, if sensitive authentication data is

3.2.d   [ref]group

For all other entities, if sensitive authentication data is

3.3   [ref]group

Mask PAN when displayed (the first

3.3.a   [ref]group

Examine written policies and procedures for masking the

3.3.b   [ref]group

Examine system configurations to verify that full PAN is

3.3.c   [ref]group

Examine displays of PAN (for example, on screen, on

3.4   [ref]group

Render PAN unreadable anywhere it

3.4.1   [ref]group

If disk encryption is used (rather

3.4.1.a   [ref]group

If disk encryption is used, inspect the configuration

3.4.1.b   [ref]group

Observe processes and interview personnel to verify

3.4.1.c   [ref]group

Examine the configurations and observe the

3.4.a   [ref]group

Examine documentation about the system used to protect

3.4.b   [ref]group

Examine several tables or files from a sample of data

3.4.c   [ref]group

Examine a sample of removable media (for example,

3.4.d   [ref]group

Examine a sample of audit logs to confirm that the PAN is

3.4.e   [ref]group

If

3.5   [ref]group

Document and implement

3.5.1   [ref]group

Restrict access to cryptographic

3.5.2   [ref]group

Store secret and private keys

3.5.2.a   [ref]group

Examine documented procedures to verify that

3.5.2.b   [ref]group

Examine system configurations and key storage

3.5.2.c   [ref]group

Wherever key-encrypting keys are used, examine

3.5.3   [ref]group

Store cryptographic keys in the

3.6   [ref]group

Fully document and implement all

3.6.1   [ref]group

Generation of strong

3.6.1.a   [ref]group

Verify that key-management procedures specify how

3.6.1.b   [ref]group

Observe the method for generating keys to verify that

3.6.2   [ref]group

Secure cryptographic key

3.6.2.a   [ref]group

Verify that key-management procedures specify how

3.6.2.b   [ref]group

Observe the method for distributing keys to verify that

3.6.3   [ref]group

Secure cryptographic key storage

3.6.3.a   [ref]group

Verify that key-management procedures specify how

3.6.3.b   [ref]group

Observe the method for storing keys to verify that

3.6.4   [ref]group

Cryptographic key changes for

3.6.4.a   [ref]group

Verify that key-management procedures include a

3.6.4.b   [ref]group

Interview personnel to verify that keys are changed at

3.6.5   [ref]group

Retirement or replacement (for

3.6.5.a   [ref]group

Verify that key-management procedures specify

3.6.5.b   [ref]group

Interview personnel to verify the following processes

3.6.6   [ref]group

If manual clear-text cryptographic

3.6.6.a   [ref]group

Verify that manual clear-text key-management

3.6.7   [ref]group

Prevention of unauthorized

3.6.7.a   [ref]group

Verify that key-management procedures specify

3.6.7.b   [ref]group

Interview personnel and/or observe processes to

3.6.8   [ref]group

Requirement for cryptographic

3.6.8.a   [ref]group

Verify that key-management procedures specify

3.6.8.b   [ref]group

Observe documentation or other evidence showing

3.6.b   [ref]group

Examine the key-management procedures and processes

3.7   [ref]group

Ensure that security policies and

4.   [ref]group

Encrypt transmission of cardholder data across open, public networks

contains 1 rule

4.1   [ref]group

Use strong cryptography and security

contains 1 rule

4.1.1   [ref]group

Ensure wireless networks transmitting

4.1.a   [ref]group

Identify all locations where cardholder data is

4.1.b   [ref]group

Review documented policies and procedures to verify

4.1.c   [ref]group

Select and observe a sample of inbound and outbound

4.1.d   [ref]group

Examine keys and certificates to verify that only

4.1.e   [ref]group

Examine system configurations to verify that the

4.1.f   [ref]group

Examine system configurations to verify that the proper

4.1.g   [ref]group

For TLS implementations, examine system

Install libreswan Package   [ref]rule

The Libreswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The libreswan package can be installed with the following command:

$ sudo yum install libreswan

Rationale:

Providing the ability for remote users or systems to initiate a secure VPN connection protects information when it is transmitted over a wide area network.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

if ! rpm -q --quiet "libreswan" ; then
    yum install -y "libreswan"
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure libreswan is installed
  package:
    name: libreswan
    state: present
  tags:
    - CCE-80170-4
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-4.1
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_libreswan_installed
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_libreswan

class install_libreswan {
  package { 'libreswan':
    ensure => 'installed',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable

package --add=libreswan
Remediation script:   (show)


[[packages]]
name = "libreswan"
version = "*"

4.2   [ref]group

Never send unprotected PANs by end-

4.2.a   [ref]group

If end-user messaging technologies are used to send

4.2.b   [ref]group

Review written policies to verify the existence of a

4.3   [ref]group

Ensure that security policies and

5.   [ref]group

Protect all systems against malware and regularly update anti-virus

5.1   [ref]group

Deploy anti-virus software on all

5.1.1   [ref]group

Ensure that anti-virus programs

5.1.2   [ref]group

For systems considered to be not

5.2   [ref]group

Ensure that all anti-virus mechanisms

5.2.a   [ref]group

Examine policies and procedures to verify that anti-virus

5.2.b   [ref]group

Examine anti-virus configurations, including the master

5.2.c   [ref]group

Examine a sample of system components, including all

5.2.d   [ref]group

Examine anti-virus configurations, including the master

5.3   [ref]group

Ensure that anti-virus mechanisms

5.3.a   [ref]group

Examine anti-virus configurations, including the master

5.3.b   [ref]group

Examine anti-virus configurations, including the master

5.3.c   [ref]group

Interview responsible personnel and observe processes to

5.4   [ref]group

Ensure that security policies and

6.   [ref]group

Develop and maintain secure systems and applications

contains 4 rules

6.1   [ref]group

Establish a process to identify security

6.1.a   [ref]group

Examine policies and procedures to verify that

6.1.b   [ref]group

Interview responsible personnel and observe

6.2   [ref]group

Ensure that all system components and

contains 4 rules

6.2.a   [ref]group

Examine policies and procedures related to security-

6.2.b   [ref]group

For a sample of system components and related

Ensure gpgcheck Enabled In Main yum Configuration   [ref]rule

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:

gpgcheck=1

Rationale:

Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).

Severity:  high

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append "/etc/yum.conf" '^gpgcheck' '1' 'CCE-26989-4'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-26989-4
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: false
  when:
    - '"yum" in ansible_facts.packages'
    - ansible_distribution == "Fedora"
  tags:
    - CCE-26989-4
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check is globally activated (yum)
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when:
    - '"yum" in ansible_facts.packages'
    - (ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or ansible_distribution
      == "Scientific" or yum_config_file.stat.exists)
  tags:
    - CCE-26989-4
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check is globally activated (dnf)
  ini_file:
    dest: /etc/dnf/dnf.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when:
    - '"yum" in ansible_facts.packages'
    - ansible_distribution == "Fedora"
  tags:
    - CCE-26989-4
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

Ensure gpgcheck Enabled for All yum Package Repositories   [ref]rule

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:

gpgcheck=0

Rationale:

Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."

Severity:  high

Remediation Shell script:   (show)

sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:enable
- name: Grep for yum repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/yum.repos.d/
  register: repo_grep_results
  ignore_errors: true
  changed_when: false
  tags:
    - CCE-26876-3
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - enable_strategy
    - ensure_gpgcheck_never_disabled
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

- name: Set gpgcheck=1 for each yum repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout | regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    }}'
  tags:
    - CCE-26876-3
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - enable_strategy
    - ensure_gpgcheck_never_disabled
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

Ensure Red Hat GPG Key Installed   [ref]rule

To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:

$ sudo subscription-manager register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY
Alternatively, the key may be pre-loaded during the RHEL installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

Rationale:

Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.

Severity:  high

Remediation Shell script:   (show)

# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_FINGERPRINT="567E347AD0044ADE55BA8A5F199E2F91FD431D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="43A6E49C4A38F4BE9ABF2A5345689C882FA658E0"

# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).

  readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$REDHAT_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    echo "${GPG_OUT[*]}" | grep -vE "${REDHAT_RELEASE_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If $REDHAT_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi
Remediation Ansible snippet:   (show)

Complexity:medium
Disruption:medium
Strategy:restrict
- name: Read permission of GPG key directory
  stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: false
  tags:
    - CCE-26957-1
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Read signatures in GPG key
  command: gpg --with-fingerprint --with-colons "/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"
  args:
    warn: false
  changed_when: false
  register: gpg_fingerprints
  check_mode: false
  tags:
    - CCE-26957-1
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Set Fact - Installed GPG Fingerprints
  set_fact:
    gpg_installed_fingerprints: |-
      {{ gpg_fingerprints.stdout | regex_findall('^pub.*
      (?:^fpr[:]*)([0-9A-Fa-f]*)', '\1') | list }}
  tags:
    - CCE-26957-1
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Set Fact - Valid fingerprints
  set_fact:
    gpg_valid_fingerprints: ("567E347AD0044ADE55BA8A5F199E2F91FD431D51" "43A6E49C4A38F4BE9ABF2A5345689C882FA658E0")
  tags:
    - CCE-26957-1
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Import RedHat GPG key
  rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
  when:
    - gpg_key_directory_permission.stat.mode <= '0755'
    - (gpg_installed_fingerprints | difference(gpg_valid_fingerprints)) | length ==
      0
    - gpg_installed_fingerprints | length > 0
    - ansible_distribution == "RedHat"
  tags:
    - CCE-26957-1
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

Ensure Software Patches Installed   [ref]rule

If the system is joined to the Red Hat Network, a Red Hat Satellite Server, or a yum server, run the following command to install updates:

$ sudo yum update
If the system is not configured to use one of these sources, updates (in the form of RPM packages) can be manually downloaded from the Red Hat Network and installed using rpm.

NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.

Rationale:

Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:high
Reboot:true
Strategy:patch


yum -y update
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:high
Reboot:true
Strategy:patch
- name: Security patches are up to date
  package:
    name: '*'
    state: latest
  tags:
    - CCE-26895-3
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-020260
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-2(5)
    - NIST-800-53-SI-2(c)
    - PCI-DSS-Req-6.2
    - high_disruption
    - high_severity
    - low_complexity
    - patch_strategy
    - reboot_required
    - security_patches_up_to_date
    - skip_ansible_lint

6.3   [ref]group

Develop internal and external software

6.3.1   [ref]group

Remove development, test and/or

6.3.2   [ref]group

Review custom code prior to release

6.3.2.a   [ref]group

Examine written software-development procedures

6.3.2.b   [ref]group

Select a sample of recent custom application

6.3.a   [ref]group

Examine written software-development processes to

6.3.b   [ref]group

Examine written software-development processes to

6.3.c   [ref]group

Examine written software-development processes to

6.3.d   [ref]group

Interview software developers to verify that written

6.4   [ref]group

Follow change control processes and

6.4.1   [ref]group

Separate development/test

6.4.1.a   [ref]group

Examine network documentation and network

6.4.1.b   [ref]group

Examine access controls settings to verify that

6.4.2   [ref]group

Separation of duties between

6.4.3   [ref]group

Production data (live PANs) are not

6.4.3.a   [ref]group

Observe testing processes and interview

6.4.3.b   [ref]group

Examine a sample of test data to verify production

6.4.4   [ref]group

Removal of test data and accounts

6.4.4.a   [ref]group

Observe testing processes and interview

6.4.4.b   [ref]group

Examine a sample of data and accounts from

6.4.5   [ref]group

Change control procedures for the

6.4.5.a   [ref]group

Examine documented change control procedures

6.4.5.b   [ref]group

For a sample of system components, interview

6.5   [ref]group

Address common coding vulnerabilities in

6.5.1   [ref]group

Injection flaws, particularly SQL

6.5.10   [ref]group

Broken authentication and session

6.5.2   [ref]group

Buffer overflows

6.5.3   [ref]group

Insecure cryptographic storage

6.5.4   [ref]group

Insecure communications

6.5.5   [ref]group

Improper error handling

6.5.6   [ref]group

Examine software-development policies and

6.5.7   [ref]group

Cross-site scripting (XSS)

6.5.8   [ref]group

Improper access control (such as

6.5.9   [ref]group

Cross-site request forgery (CSRF)

6.5.a   [ref]group

Examine software-development policies and

6.5.b   [ref]group

Interview a sample of developers to verify that they are

6.5.c   [ref]group

Examine records of training to verify that software

6.6   [ref]group

For public-facing web applications,

6.7   [ref]group

Ensure that security policies and

7.   [ref]group

Restrict access to cardholder data by business need to know

contains 2 rules

7.1   [ref]group

Limit access to system

contains 2 rules

7.1.1   [ref]group

Define access needs for

7.1.2   [ref]group

Restrict access to privileged

7.1.2.a   [ref]group

Interview personnel responsible for assigning access to

7.1.2.b   [ref]group

Select a sample of user IDs with privileged access and

7.1.3   [ref]group

Assign access based on

7.1.4   [ref]group

Require documented

Verify /boot/grub2/grub.cfg Group Ownership   [ref]rule

The file /boot/grub2/grub.cfg should be group-owned by the root group to prevent destruction or modification of the file. To properly set the group owner of {{{ grub2_boot_path }}}/grub.cfg, run the command:

$ sudo chgrp root {{{ grub2_boot_path }}}/grub.cfg

Rationale:

The root group is a highly-privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-82023-3
    - CJIS-5.5.2.2
    - NIST-800-171-3.4.5
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-7.1
    - configure_strategy
    - file_groupowner_grub2_cfg
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure group owner 0 on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    group: '0'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82023-3
    - CJIS-5.5.2.2
    - NIST-800-171-3.4.5
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-7.1
    - configure_strategy
    - file_groupowner_grub2_cfg
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify /boot/grub2/grub.cfg User Ownership   [ref]rule

The file /boot/grub2/grub.cfg should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of {{{ grub2_boot_path }}}/grub.cfg, run the command:

$ sudo chown root {{{ grub2_boot_path }}}/grub.cfg 

Rationale:

Only root should be able to modify important boot parameters.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /boot/grub2/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /boot/grub2/grub.cfg
  stat:
    path: /boot/grub2/grub.cfg
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-82026-6
    - CJIS-5.5.2.2
    - NIST-800-171-3.4.5
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-7.1
    - configure_strategy
    - file_owner_grub2_cfg
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure owner 0 on /boot/grub2/grub.cfg
  file:
    path: /boot/grub2/grub.cfg
    owner: '0'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82026-6
    - CJIS-5.5.2.2
    - NIST-800-171-3.4.5
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-7.1
    - configure_strategy
    - file_owner_grub2_cfg
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

7.2   [ref]group

Establish an access control

7.2.1   [ref]group

Coverage of all system

7.2.2   [ref]group

Assignment of privileges to

7.2.3   [ref]group

7.3   [ref]group

Ensure that security policies and

8.   [ref]group

Identify and authenticate access to system components

contains 32 rules

8.1   [ref]group

Define and implement policies and

contains 10 rules

8.1.1   [ref]group

Assign all users a unique ID

contains 1 rule

8.1.2   [ref]group

Control addition, deletion, and

8.1.3   [ref]group

Immediately revoke access for

8.1.3.a   [ref]group

Select a sample of users terminated in the past six

8.1.3.b   [ref]group

Verify all physical authentication methods

8.1.4   [ref]group

Remove/disable inactive user

contains 1 rule

8.1.5   [ref]group

Manage IDs used by vendors to

8.1.5.a   [ref]group

Interview personnel and observe processes for

8.1.5.b   [ref]group

Interview personnel and observe processes to verify

8.1.6   [ref]group

Limit repeated access attempts

contains 1 rule

8.1.6.a   [ref]group

For a sample of system components, inspect system

8.1.6.b   [ref]group

Set Deny For Failed Password Attempts   [ref]rule

To configure the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=6 unlock_time=1800 fail_interval=900
  • add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=6 unlock_time=1800 fail_interval=900
  • add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so

Rationale:

Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_accounts_passwords_pam_faillock_deny="6"



AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

for pam_file in "${AUTH_FILES[@]}"
do
    # is auth required pam_faillock.so preauth present?
    if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*'"deny"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"deny"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ '"deny"'='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        fi
    # auth required pam_faillock.so preauth is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent '"deny"'='"$var_accounts_passwords_pam_faillock_deny" "$pam_file"
    fi
    # is auth default pam_faillock.so authfail present?
    if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*'"deny"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\('"deny"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ '"deny"'='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        fi
    # auth default pam_faillock.so authfail is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail '"deny"'='"$var_accounts_passwords_pam_faillock_deny" "$pam_file"
    fi
    if ! grep -qE '^\s*account\s+required\s+pam_faillock\.so.*$' "$pam_file" ; then
        sed -E -i --follow-symlinks '/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so' "$pam_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-27350-8
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 6
  tags:
    - always

- name: Add auth pam_faillock preauth deny before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent deny={{ var_accounts_passwords_pam_faillock_deny
      }}
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27350-8
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add deny argument to auth pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent deny={{ var_accounts_passwords_pam_faillock_deny
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27350-8
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock authfail deny after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail deny={{ var_accounts_passwords_pam_faillock_deny }}
    state: after
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27350-8
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add deny argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    new_type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail deny={{ var_accounts_passwords_pam_faillock_deny }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27350-8
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27350-8
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

8.1.7   [ref]group

Set the lockout duration to a

contains 1 rule

Set Lockout Time for Failed Password Attempts   [ref]rule

To configure the system to lock out accounts after a number of incorrect login attempts and require an administrator to unlock the account using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=6 unlock_time=1800 fail_interval=900
  • add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=6 unlock_time=1800 fail_interval=900
  • add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so
If unlock_time is set to 0, manual intervention by an administrator is required to unlock a user.

Rationale:

Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. Ensuring that an administrator is involved in unlocking locked accounts draws appropriate attention to such situations.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_accounts_passwords_pam_faillock_unlock_time="1800"



AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

for pam_file in "${AUTH_FILES[@]}"
do
    # is auth required pam_faillock.so preauth present?
    if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*'"unlock_time"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"unlock_time"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        fi
    # auth required pam_faillock.so preauth is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time" "$pam_file"
    fi
    # is auth default pam_faillock.so authfail present?
    if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*'"unlock_time"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\('"unlock_time"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        fi
    # auth default pam_faillock.so authfail is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time" "$pam_file"
    fi
    if ! grep -qE '^\s*account\s+required\s+pam_faillock\.so.*$' "$pam_file" ; then
        sed -E -i --follow-symlinks '/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so' "$pam_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-26884-7
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 1800
  tags:
    - always

- name: Add auth pam_faillock preauth unlock_time before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-26884-7
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add unlock_time argument to pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-26884-7
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock authfail unlock_interval after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: after
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-26884-7
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add unlock_time argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-26884-7
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-26884-7
    - CJIS-5.5.3
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

8.1.8   [ref]group

If a session has been idle for

contains 6 rules

Enable GNOME3 Screensaver Idle Activation   [ref]rule

To activate the screensaver in the GNOME3 desktop after a period of inactivity, add or set idle-activation-enabled to true in /etc/dconf/db/local.d/00-security-settings. For example:

[org/gnome/desktop/screensaver]
idle-activation-enabled=true
Once the setting has been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/idle-activation-enabled
After the settings have been set, run dconf update.

Rationale:

A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME desktops can be configured to identify when a user's session has idled and take action to initiate the session lock.

Enabling idle activation of the screensaver ensures the screensaver will be activated after the idle delay. Applications requiring continuous, real-time screen display (such as network management products) require the login session does not have administrator rights and the display station is located in a controlled-access area.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

if [ "${#SETTINGSFILES[@]}" -eq 0 ]
then
    [ ! -z ${DCONFFILE} ] || echo "" >> ${DCONFFILE}
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
    printf '%s=%s\n' "idle-activation-enabled" "true" >> ${DCONFFILE}
else
    escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
    if grep -q "^\\s*idle-activation-enabled\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -i "s/\\s*idle-activation-enabled\\s*=\\s*.*/idle-activation-enabled=${escaped_value}/g" "${SETTINGSFILES[@]}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\idle-activation-enabled=${escaped_value}" "${SETTINGSFILES[@]}"
    fi
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/idle-activation-enabled$" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

if [[ -z "${LOCKFILES}" ]]
then
    echo "/org/gnome/desktop/screensaver/idle-activation-enabled" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-80111-8
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010100
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_activation_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Enable GNOME3 Screensaver Idle Activation
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/screensaver
    option: idle-activation-enabled
    value: 'true'
    create: true
    no_extra_spaces: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80111-8
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010100
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_activation_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Prevent user modification of GNOME idle-activation-enabled
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/screensaver/idle-activation-enabled$
    line: /org/gnome/desktop/screensaver/idle-activation-enabled
    create: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80111-8
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010100
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_activation_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80111-8
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010100
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_activation_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

Set GNOME3 Screensaver Inactivity Timeout   [ref]rule

The idle time-out value for inactivity in the GNOME3 desktop is configured via the idle-delay setting must be set under an appropriate configuration file(s) in the /etc/dconf/db/local.d directory and locked in /etc/dconf/db/local.d/locks directory to prevent user modification.

For example, to configure the system for a 15 minute delay, add the following to /etc/dconf/db/local.d/00-security-settings:

[org/gnome/desktop/session]
idle-delay=uint32 900
Once the setting has been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/session/idle-delay
After the settings have been set, run dconf update.

Rationale:

A session time-out lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of the temporary nature of the absence. Rather than relying on the user to manually lock their operating system session prior to vacating the vicinity, GNOME3 can be configured to identify when a user's session has idled and take action to initiate a session lock.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then


inactivity_timeout_value="900"



# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/session\\]" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

if [ "${#SETTINGSFILES[@]}" -eq 0 ]
then
    [ ! -z ${DCONFFILE} ] || echo "" >> ${DCONFFILE}
    printf '%s\n' "[org/gnome/desktop/session]" >> ${DCONFFILE}
    printf '%s=%s\n' "idle-delay" "uint32 ${inactivity_timeout_value}" >> ${DCONFFILE}
else
    escaped_value="$(sed -e 's/\\/\\\\/g' <<< "uint32 ${inactivity_timeout_value}")"
    if grep -q "^\\s*idle-delay\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -i "s/\\s*idle-delay\\s*=\\s*.*/idle-delay=${escaped_value}/g" "${SETTINGSFILES[@]}"
    else
        sed -i "\\|\\[org/gnome/desktop/session\\]|a\\idle-delay=${escaped_value}" "${SETTINGSFILES[@]}"
    fi
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/session/idle-delay$" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

if [[ -z "${LOCKFILES}" ]]
then
    echo "/org/gnome/desktop/session/idle-delay" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-80110-0
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010070
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_delay
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy
- name: XCCDF Value inactivity_timeout_value # promote to variable
  set_fact:
    inactivity_timeout_value: !!str 900
  tags:
    - always

- name: Set GNOME3 Screensaver Inactivity Timeout
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/session
    option: idle-delay
    value: uint32 {{ inactivity_timeout_value }}
    create: true
    no_extra_spaces: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80110-0
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010070
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_delay
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Prevent user modification of GNOME idle-delay
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/session/idle-delay$
    line: /org/gnome/desktop/session/idle-delay
    create: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80110-0
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010070
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_delay
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80110-0
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010070
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_idle_delay
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

Enable GNOME3 Screensaver Lock After Idle Period   [ref]rule

To activate locking of the screensaver in the GNOME3 desktop when it is activated, add or set lock-enabled to true in /etc/dconf/db/local.d/00-security-settings. For example:

[org/gnome/desktop/screensaver]
lock-enabled=true
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/lock-enabled
After the settings have been set, run dconf update.

Rationale:

A session lock is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not want to logout because of the temporary nature of the absense.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

if [ "${#SETTINGSFILES[@]}" -eq 0 ]
then
    [ ! -z ${DCONFFILE} ] || echo "" >> ${DCONFFILE}
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
    printf '%s=%s\n' "lock-enabled" "true" >> ${DCONFFILE}
else
    escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
    if grep -q "^\\s*lock-enabled\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -i "s/\\s*lock-enabled\\s*=\\s*.*/lock-enabled=${escaped_value}/g" "${SETTINGSFILES[@]}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\lock-enabled=${escaped_value}" "${SETTINGSFILES[@]}"
    fi
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/lock-enabled$" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

if [[ -z "${LOCKFILES}" ]]
then
    echo "/org/gnome/desktop/screensaver/lock-enabled" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - ansible_distribution == 'SLES'
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Enable GNOME3 Screensaver Lock After Idle Period
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/screensaver
    option: lock-enabled
    value: 'true'
    create: true
    no_extra_spaces: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Prevent user modification of GNOME lock-enabled
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/screensaver/lock-enabled$
    line: /org/gnome/desktop/screensaver/lock-enabled
    create: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Check GNOME3 screenserver disable-lock-screen false
  command: gsettings get org.gnome.desktop.lockdown disable-lock-screen
  register: cmd_out
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - ansible_distribution == 'SLES'
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Update GNOME3 screenserver disable-lock-screen false
  command: gsettings set org.gnome.desktop.lockdown disable-lock-screen false
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - ansible_distribution == 'SLES'
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80112-6
    - CJIS-5.5.5
    - DISA-STIG-RHEL-07-010060
    - NIST-800-171-3.1.10
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_lock_enabled
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

Implement Blank Screensaver   [ref]rule

To set the screensaver mode in the GNOME3 desktop to a blank screen, add or set picture-uri to string '' in /etc/dconf/db/local.d/00-security-settings. For example:

[org/gnome/desktop/screensaver]
picture-uri=''
Once the settings have been added, add a lock to /etc/dconf/db/local.d/locks/00-security-settings-lock to prevent user modification. For example:
/org/gnome/desktop/screensaver/picture-uri
After the settings have been set, run dconf update.

Rationale:

Setting the screensaver mode to blank-only conceals the contents of the display from passersby.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/desktop/screensaver\\]" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/local.d/00-security-settings"
DBDIR="/etc/dconf/db/local.d"

mkdir -p "${DBDIR}"

if [ "${#SETTINGSFILES[@]}" -eq 0 ]
then
    [ ! -z ${DCONFFILE} ] || echo "" >> ${DCONFFILE}
    printf '%s\n' "[org/gnome/desktop/screensaver]" >> ${DCONFFILE}
    printf '%s=%s\n' "picture-uri" "string ''" >> ${DCONFFILE}
else
    escaped_value="$(sed -e 's/\\/\\\\/g' <<< "string ''")"
    if grep -q "^\\s*picture-uri\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -i "s/\\s*picture-uri\\s*=\\s*.*/picture-uri=${escaped_value}/g" "${SETTINGSFILES[@]}"
    else
        sed -i "\\|\\[org/gnome/desktop/screensaver\\]|a\\picture-uri=${escaped_value}" "${SETTINGSFILES[@]}"
    fi
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/desktop/screensaver/picture-uri$" "/etc/dconf/db/" | grep -v 'distro\|ibus' | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/local.d/locks"

mkdir -p "${LOCKSFOLDER}"

if [[ -z "${LOCKFILES}" ]]
then
    echo "/org/gnome/desktop/screensaver/picture-uri" >> "/etc/dconf/db/local.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-80113-4
    - CJIS-5.5.5
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(1)
    - NIST-800-53-AC-11(1).1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_mode_blank
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Implement Blank Screensaver
  ini_file:
    dest: /etc/dconf/db/local.d/00-security-settings
    section: org/gnome/desktop/screensaver
    option: picture-uri
    value: string ''
    create: true
    no_extra_spaces: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80113-4
    - CJIS-5.5.5
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(1)
    - NIST-800-53-AC-11(1).1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_mode_blank
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Prevent user modification of GNOME picture-uri
  lineinfile:
    path: /etc/dconf/db/local.d/locks/00-security-settings-lock
    regexp: ^/org/gnome/desktop/screensaver/picture-uri$
    line: /org/gnome/desktop/screensaver/picture-uri
    create: true
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80113-4
    - CJIS-5.5.5
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(1)
    - NIST-800-53-AC-11(1).1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_mode_blank
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

- name: Dconf Update
  command: dconf update
  when:
    - '"gdm" in ansible_facts.packages'
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80113-4
    - CJIS-5.5.5
    - NIST-800-171-3.1.10
    - NIST-800-53-AC-11(1)
    - NIST-800-53-AC-11(1).1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.8
    - dconf_gnome_screensaver_mode_blank
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy

Set SSH Idle Timeout Interval   [ref]rule

SSH allows administrators to set an idle timeout interval. After this interval has passed, the idle user will be automatically logged out.

To set an idle timeout interval, edit the following line in /etc/ssh/sshd_config as follows:

ClientAliveInterval 900


The timeout interval is given in seconds. For example, have a timeout of 10 minutes, set interval to 600.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made in /etc/ssh/sshd_config. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.

Warning:  SSH disconnecting idle clients will not have desired effect without also configuring ClientAliveCountMax in the SSH service configuration.
Warning:  Following conditions may prevent the SSH session to time out:
  • Remote processes on the remote machine generates output. As the output has to be transferred over the network to the client, the timeout is reset every time such transfer happens.
  • Any scp or sftp activity by the same user to the host resets the timeout.
Rationale:

Terminating an idle ssh session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


sshd_idle_timeout_value="900"



if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value sshd_idle_timeout_value # promote to variable
  set_fact:
    sshd_idle_timeout_value: !!str 900
  tags:
    - always

- name: Set SSH Idle Timeout Interval
  block:

    - name: Check for duplicate values
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*ClientAliveInterval\s+
        state: absent
      check_mode: true
      changed_when: false
      register: dupes

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*ClientAliveInterval\s+
        state: absent
      when: dupes.found is defined and dupes.found > 1

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        regexp: (?i)^\s*ClientAliveInterval\s+
        line: ClientAliveInterval {{ sshd_idle_timeout_value }}
        state: present
        insertbefore: ^[#\s]*Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27433-2
    - CJIS-5.5.6
    - DISA-STIG-RHEL-07-040320
    - NIST-800-171-3.1.11
    - NIST-800-53-AC-12
    - NIST-800-53-AC-17(a)
    - NIST-800-53-AC-17(a)
    - NIST-800-53-AC-2(5)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-10
    - PCI-DSS-Req-8.1.8
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sshd_set_idle_timeout

Set SSH Client Alive Count Max to zero   [ref]rule

The SSH server sends at most ClientAliveCountMax messages during a SSH session and waits for a response from the SSH client. The option ClientAliveInterval configures timeout after each ClientAliveCountMax message. If the SSH server does not receive a response from the client, then the connection is considered idle and terminated. To ensure the SSH idle timeout occurs precisely when the ClientAliveInterval is set, set the ClientAliveCountMax to value of 0.

Rationale:

This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveCountMax 0" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveCountMax 0" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set SSH Client Alive Count Max to zero
  block:

    - name: Check for duplicate values
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*ClientAliveCountMax\s+
        state: absent
      check_mode: true
      changed_when: false
      register: dupes

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*ClientAliveCountMax\s+
        state: absent
      when: dupes.found is defined and dupes.found > 1

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        regexp: (?i)^\s*ClientAliveCountMax\s+
        line: ClientAliveCountMax 0
        state: present
        insertbefore: ^[#\s]*Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83399-6
    - CJIS-5.5.6
    - DISA-STIG-RHEL-07-040340
    - NIST-800-171-3.1.11
    - NIST-800-53-AC-12
    - NIST-800-53-AC-17(a)
    - NIST-800-53-AC-2(5)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-10
    - PCI-DSS-Req-8.1.8
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sshd_set_keepalive_0

8.1.a   [ref]group

Review procedures and confirm they define processes for

8.1.b   [ref]group

Verify that procedures are implemented for user

8.2   [ref]group

In addition to assigning a unique ID,

contains 11 rules

8.2.1   [ref]group

Using strong cryptography,

contains 4 rules

8.2.1.a   [ref]group

Examine vendor documentation and system

8.2.1.b   [ref]group

For a sample of system components, examine

8.2.1.c   [ref]group

For a sample of system components, examine data

8.2.1.d   [ref]group

Set Password Hashing Algorithm in /etc/libuser.conf   [ref]rule

In /etc/libuser.conf, add or correct the following line in its [defaults] section to ensure the system will use the SHA-512 algorithm for password hashing:

crypt_style = sha512

Rationale:

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q libuser; then

LIBUSER_CONF="/etc/libuser.conf"
CRYPT_STYLE_REGEX='[[:space:]]*\[defaults](.*(\n)+)+?[[:space:]]*crypt_style[[:space:]]*'

# Try find crypt_style in [defaults] section. If it is here, then change algorithm to sha512.
# If it isn't here, then add it to [defaults] section.
if grep -qzosP $CRYPT_STYLE_REGEX $LIBUSER_CONF ; then
        sed -i "s/\(crypt_style[[:space:]]*=[[:space:]]*\).*/\1sha512/g" $LIBUSER_CONF
elif grep -qs "\[defaults]" $LIBUSER_CONF ; then
        sed -i "/[[:space:]]*\[defaults]/a crypt_style = sha512" $LIBUSER_CONF
else
        echo -e "[defaults]\ncrypt_style = sha512" >> $LIBUSER_CONF
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-82038-1
    - CJIS-5.6.2.2
    - DISA-STIG-RHEL-07-010220
    - NIST-800-171-3.13.11
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.1
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - set_password_hashing_algorithm_libuserconf

- name: Set Password Hashing Algorithm in /etc/libuser.conf
  lineinfile:
    dest: /etc/libuser.conf
    insertafter: ^\s*\[defaults]
    regexp: ^#?crypt_style
    line: crypt_style = sha512
    state: present
    create: true
  when: '"libuser" in ansible_facts.packages'
  tags:
    - CCE-82038-1
    - CJIS-5.6.2.2
    - DISA-STIG-RHEL-07-010220
    - NIST-800-171-3.13.11
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.1
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - set_password_hashing_algorithm_libuserconf

Set Password Hashing Algorithm in /etc/login.defs   [ref]rule

In /etc/login.defs, add or correct the following line to ensure the system will use SHA-512 as the hashing algorithm:

ENCRYPT_METHOD SHA512

Rationale:

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q shadow-utils; then


var_password_hashing_algorithm="SHA512"



if grep --silent ^ENCRYPT_METHOD /etc/login.defs ; then
	sed -i "s/^ENCRYPT_METHOD .*/ENCRYPT_METHOD $var_password_hashing_algorithm/g" /etc/login.defs
else
	echo "" >> /etc/login.defs
	echo "ENCRYPT_METHOD $var_password_hashing_algorithm" >> /etc/login.defs
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-82050-6
    - CJIS-5.6.2.2
    - DISA-STIG-RHEL-07-010210
    - NIST-800-171-3.13.11
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.1
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - set_password_hashing_algorithm_logindefs
- name: XCCDF Value var_password_hashing_algorithm # promote to variable
  set_fact:
    var_password_hashing_algorithm: !!str SHA512
  tags:
    - always

- name: Set Password Hashing Algorithm in /etc/login.defs
  lineinfile:
    dest: /etc/login.defs
    regexp: ^#?ENCRYPT_METHOD
    line: ENCRYPT_METHOD {{ var_password_hashing_algorithm }}
    state: present
    create: true
  when: '"shadow-utils" in ansible_facts.packages'
  tags:
    - CCE-82050-6
    - CJIS-5.6.2.2
    - DISA-STIG-RHEL-07-010210
    - NIST-800-171-3.13.11
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.1
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - set_password_hashing_algorithm_logindefs

Set PAM's Password Hashing Algorithm   [ref]rule

The PAM system service can be configured to only store encrypted representations of passwords. In /etc/pam.d/system-auth, the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:

password    sufficient    pam_unix.so sha512 other arguments...

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.

Rationale:

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	if ! grep -q "^password.*sufficient.*pam_unix.so.*sha512" $pamFile; then
		sed -i --follow-symlinks "/^password.*sufficient.*pam_unix.so/ s/$/ sha512/" $pamFile
	fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Verify All Account Password Hashes are Shadowed   [ref]rule

If any password hashes are stored in /etc/passwd (in the second field, instead of an x or *), the cause of this misconfiguration should be investigated. The account should have its password reset and the hash should be properly stored, or the account should be deleted entirely.

Rationale:

The hashes for all user account passwords should be stored in the file /etc/shadow and never in /etc/passwd, which is readable by all users.

Severity:  medium

8.2.2   [ref]group

Verify user identity before

8.2.3   [ref]group

Passwords/phrases must meet

contains 5 rules

8.2.3.a   [ref]group

For a sample of system components, inspect system

8.2.3.b   [ref]group

Ensure PAM Enforces Password Requirements - Minimum Digit Characters   [ref]rule

The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.

Rationale:

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_password_pam_dcredit="-1"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append '/etc/security/pwquality.conf' '^dcredit' $var_password_pam_dcredit 'CCE-27214-6' '%s = %s'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-27214-6
    - DISA-STIG-RHEL-07-010140
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_dcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable dcredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27214-6
    - DISA-STIG-RHEL-07-010140
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_dcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters   [ref]rule

The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.

Rationale:

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_password_pam_lcredit="-1"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append '/etc/security/pwquality.conf' '^lcredit' $var_password_pam_lcredit 'CCE-27345-8' '%s = %s'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-27345-8
    - DISA-STIG-RHEL-07-010130
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_lcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable lcredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27345-8
    - DISA-STIG-RHEL-07-010130
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_lcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Ensure PAM Enforces Password Requirements - Minimum Length   [ref]rule

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=7 after pam_pwquality to set minimum password length requirements.

Rationale:

The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromose the password.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_password_pam_minlen="7"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append '/etc/security/pwquality.conf' '^minlen' $var_password_pam_minlen 'CCE-27293-0' '%s = %s'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-27293-0
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-07-010280
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_minlen
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 7
  tags:
    - always

- name: Ensure PAM variable minlen is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27293-0
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-07-010280
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_minlen
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters   [ref]rule

The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.

Rationale:

Use of a complex password helps to increase the time and resources reuiqred to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_password_pam_ucredit="-1"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append '/etc/security/pwquality.conf' '^ucredit' $var_password_pam_ucredit 'CCE-27200-5' '%s = %s'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-27200-5
    - DISA-STIG-RHEL-07-010120
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_ucredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable ucredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-27200-5
    - DISA-STIG-RHEL-07-010120
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_ucredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Prevent Login to Accounts With Empty Password   [ref]rule

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth to prevent logins with empty passwords. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.

Rationale:

If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.

Severity:  high

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/system-auth
sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/password-auth

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure
- name: Prevent Log In to Accounts With Empty Password - system-auth
  replace:
    dest: /etc/pam.d/system-auth
    regexp: nullok
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27286-4
    - CJIS-5.5.2
    - DISA-STIG-RHEL-07-010290
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - configure_strategy
    - high_severity
    - low_complexity
    - medium_disruption
    - no_empty_passwords
    - no_reboot_needed

- name: Prevent Log In to Accounts With Empty Password - password-auth
  replace:
    dest: /etc/pam.d/password-auth
    regexp: nullok
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27286-4
    - CJIS-5.5.2
    - DISA-STIG-RHEL-07-010290
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - configure_strategy
    - high_severity
    - low_complexity
    - medium_disruption
    - no_empty_passwords
    - no_reboot_needed
Remediation script:   (show)

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/password-auth
        overwrite: true
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/system-auth
        overwrite: true

8.2.4   [ref]group

Change user

contains 1 rule

8.2.4.a   [ref]group

For a sample of system components, inspect system

8.2.4.b   [ref]group

8.2.5   [ref]group

Do not allow an individual to

contains 1 rule

8.2.5.a   [ref]group

For a sample of system components, obtain and

8.2.5.b   [ref]group

Limit Password Reuse   [ref]rule

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.

In the file /etc/pam.d/system-auth, append remember=4 to the line which refers to the pam_unix.so or pam_pwhistory.somodule, as shown below:

  • for the pam_unix.so case:
    password sufficient pam_unix.so ...existing_options... remember=4
  • for the pam_pwhistory.so case:
    password requisite pam_pwhistory.so ...existing_options... remember=4
The DoD STIG requirement is 5 passwords.

Rationale:

Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_password_pam_unix_remember="4"



AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	if grep -q "remember=" $pamFile; then
		sed -i --follow-symlinks "s/\(^password.*sufficient.*pam_unix.so.*\)\(\(remember *= *\)[^ $]*\)/\1remember=$var_password_pam_unix_remember/" $pamFile
	else
		sed -i --follow-symlinks "/^password[[:space:]]\+sufficient[[:space:]]\+pam_unix.so/ s/$/ remember=$var_password_pam_unix_remember/" $pamFile
	fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-82030-8
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-07-010270
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: !!str 4
  tags:
    - always

- name: Do not allow users to reuse recent passwords - system-auth (change)
  replace:
    dest: /etc/pam.d/system-auth
    regexp: ^(password\s+sufficient\s+pam_unix\.so\s.*remember\s*=\s*)(\S+)(.*)$
    replace: \g<1>{{ var_password_pam_unix_remember }}\g<3>
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-82030-8
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-07-010270
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Do not allow users to reuse recent passwords - system-auth (add)
  replace:
    dest: /etc/pam.d/system-auth
    regexp: ^password\s+sufficient\s+pam_unix\.so\s(?!.*remember\s*=\s*).*$
    replace: \g<0> remember={{ var_password_pam_unix_remember }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-82030-8
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-07-010270
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

8.2.6   [ref]group

Set passwords/phrases for first-

8.3   [ref]group

Incorporate two-factor authentication

contains 1 rule

8.3.a   [ref]group

Examine system configurations for remote access servers

8.3.b   [ref]group

Observe a sample of personnel (for example, users and

Enable Smart Card Login   [ref]rule

To enable smart card authentication, consult the documentation at:

For guidance on enabling SSH to authenticate against a Common Access Card (CAC), consult documentation at:

Rationale:

Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Install required packages
if ! rpm -q --quiet "esc" ; then
    yum install -y "esc"
fi
if ! rpm -q --quiet "pam_pkcs11" ; then
    yum install -y "pam_pkcs11"
fi

# Enable pcscd.socket systemd activation socket
/usr/bin/systemctl enable "pcscd.socket"
/usr/bin/systemctl start "pcscd.socket"
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
/usr/bin/systemctl reset-failed "pcscd.socket"

# Configure the expected /etc/pam.d/system-auth{,-ac} settings directly
#
# The code below will configure system authentication in the way smart card
# logins will be enabled, but also user login(s) via other method to be allowed
#
# NOTE: It is not possible to use the 'authconfig' command to perform the
#       remediation for us, because call of 'authconfig' would discard changes
#       for other remediations (see RH BZ#1357019 for details)
#
#	Therefore we need to configure the necessary settings directly.
#

# Define system-auth config location
SYSTEM_AUTH_CONF="/etc/pam.d/system-auth"
# Define expected 'pam_env.so' row in $SYSTEM_AUTH_CONF
PAM_ENV_SO="auth.*required.*pam_env.so"

# Define 'pam_succeed_if.so' row to be appended past $PAM_ENV_SO row into $SYSTEM_AUTH_CONF
SYSTEM_AUTH_PAM_SUCCEED="\
auth        [success=1 default=ignore] pam_succeed_if.so service notin \
login:gdm:xdm:kdm:xscreensaver:gnome-screensaver:kscreensaver quiet use_uid"
# Define 'pam_pkcs11.so' row to be appended past $SYSTEM_AUTH_PAM_SUCCEED
# row into SYSTEM_AUTH_CONF file
SYSTEM_AUTH_PAM_PKCS11="\
auth        [success=done authinfo_unavail=ignore ignore=ignore default=die] \
pam_pkcs11.so nodebug"

# Define smartcard-auth config location
SMARTCARD_AUTH_CONF="/etc/pam.d/smartcard-auth"
# Define 'pam_pkcs11.so' auth section to be appended past $PAM_ENV_SO into $SMARTCARD_AUTH_CONF
SMARTCARD_AUTH_SECTION="\
auth        [success=done ignore=ignore default=die] pam_pkcs11.so nodebug wait_for_card"
# Define expected 'pam_permit.so' row in $SMARTCARD_AUTH_CONF
PAM_PERMIT_SO="account.*required.*pam_permit.so"
# Define 'pam_pkcs11.so' password section
SMARTCARD_PASSWORD_SECTION="\
password    required      pam_pkcs11.so"

# First Correct the SYSTEM_AUTH_CONF configuration
if ! grep -q 'pam_pkcs11.so' "$SYSTEM_AUTH_CONF"
then
	# Append (expected) pam_succeed_if.so row past the pam_env.so into SYSTEM_AUTH_CONF file
	# and append (expected) pam_pkcs11.so row right after the pam_succeed_if.so we just added
	# in SYSTEM_AUTH_CONF file
	# This will preserve any other already existing row equal to "$SYSTEM_AUTH_PAM_SUCCEED"
	echo "$(awk '/^'"$PAM_ENV_SO"'/{print $0 RS "'"$SYSTEM_AUTH_PAM_SUCCEED"'" RS "'"$SYSTEM_AUTH_PAM_PKCS11"'";next}1' "$SYSTEM_AUTH_CONF")" > "$SYSTEM_AUTH_CONF"
fi

# Then also correct the SMARTCARD_AUTH_CONF
if ! grep -q 'pam_pkcs11.so' "$SMARTCARD_AUTH_CONF"
then
	# Append (expected) SMARTCARD_AUTH_SECTION row past the pam_env.so into SMARTCARD_AUTH_CONF file
	sed -i --follow-symlinks -e '/^'"$PAM_ENV_SO"'/a '"$SMARTCARD_AUTH_SECTION" "$SMARTCARD_AUTH_CONF"
	# Append (expected) SMARTCARD_PASSWORD_SECTION row past the pam_permit.so into SMARTCARD_AUTH_CONF file
	sed -i --follow-symlinks -e '/^'"$PAM_PERMIT_SO"'/a '"$SMARTCARD_PASSWORD_SECTION" "$SMARTCARD_AUTH_CONF"
fi

# Perform /etc/pam_pkcs11/pam_pkcs11.conf settings below
# Define selected constants for later reuse
SP="[:space:]"
PAM_PKCS11_CONF="/etc/pam_pkcs11/pam_pkcs11.conf"

# Ensure OCSP is turned on in $PAM_PKCS11_CONF
# 1) First replace any occurrence of 'none' value of 'cert_policy' key setting with the correct configuration
sed -i "s/^[$SP]*cert_policy[$SP]\+=[$SP]\+none;/\t\tcert_policy = ca, ocsp_on, signature;/g" "$PAM_PKCS11_CONF"
# 2) Then append 'ocsp_on' value setting to each 'cert_policy' key in $PAM_PKCS11_CONF configuration line,
# which does not contain it yet
sed -i "/ocsp_on/! s/^[$SP]*cert_policy[$SP]\+=[$SP]\+\(.*\);/\t\tcert_policy = \1, ocsp_on;/" "$PAM_PKCS11_CONF"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Anaconda snippet:   (show)


package --add=pam_pkcs11 --add=esc

8.4   [ref]group

Document and communicate

8.4.a   [ref]group

Examine

8.4.b   [ref]group

Review authentication policies and procedures that are

8.4.c   [ref]group

Interview a sample of users to verify that they are familiar

8.5   [ref]group

Do not use group, shared, or generic

contains 1 rule

8.5.1   [ref]group

8.5.a   [ref]group

For a sample of system components, examine user ID lists

contains 1 rule

All GIDs referenced in /etc/passwd must be defined in /etc/group   [ref]rule

Add a group to the system for each GID referenced without a corresponding group.

Rationale:

If a user is assigned the Group Identifier (GID) of a group not existing on the system, and a group with the Gruop Identifier (GID) is subsequently created, the user may have unintended rights to any files associated with the group.

Severity:  low

8.5.b   [ref]group

Examine authentication policies and procedures to verify

8.5.c   [ref]group

Interview system administrators to verify that group and

8.6   [ref]group

Where other authentication

8.6.a   [ref]group

Examine authentication policies and procedures to verify

8.6.b   [ref]group

Interview security personnel to verify authentication

8.6.c   [ref]group

Examine system configuration settings and/or physical

8.7   [ref]group

All access to any database

contains 9 rules

8.7.a   [ref]group

Review database and application configuration settings

8.7.b   [ref]group

Examine database and application configuration settings to

8.7.c   [ref]group

Examine database access control settings and database

contains 9 rules

Verify Group Who Owns group File   [ref]rule

To properly set the group owner of /etc/group, run the command:

$ sudo chgrp root /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chgrp 0 /etc/group
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
    - CCE-82037-3
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_groupowner_etc_group
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure group owner 0 on /etc/group
  file:
    path: /etc/group
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82037-3
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_groupowner_etc_group
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify Group Who Owns passwd File   [ref]rule

To properly set the group owner of /etc/passwd, run the command:

$ sudo chgrp root /etc/passwd

Rationale:

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chgrp 0 /etc/passwd
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
    - CCE-26639-5
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_groupowner_etc_passwd
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-26639-5
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_groupowner_etc_passwd
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify Group Who Owns shadow File   [ref]rule

To properly set the group owner of /etc/shadow, run the command:

$ sudo chgrp root /etc/shadow

Rationale:

The /etc/shadow file stores password hashes. Protection of this file is critical for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chgrp 0 /etc/shadow
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
    - CCE-82051-4
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_groupowner_etc_shadow
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure group owner 0 on /etc/shadow
  file:
    path: /etc/shadow
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82051-4
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_groupowner_etc_shadow
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify User Who Owns group File   [ref]rule

To properly set the owner of /etc/group, run the command:

$ sudo chown root /etc/group 

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chown 0 /etc/group
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
    - CCE-82031-6
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_owner_etc_group
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure owner 0 on /etc/group
  file:
    path: /etc/group
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82031-6
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_owner_etc_group
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify User Who Owns passwd File   [ref]rule

To properly set the owner of /etc/passwd, run the command:

$ sudo chown root /etc/passwd 

Rationale:

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chown 0 /etc/passwd
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
    - CCE-82052-2
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_owner_etc_passwd
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82052-2
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_owner_etc_passwd
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify User Who Owns shadow File   [ref]rule

To properly set the owner of /etc/shadow, run the command:

$ sudo chown root /etc/shadow 

Rationale:

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chown 0 /etc/shadow
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
    - CCE-82022-5
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_owner_etc_shadow
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure owner 0 on /etc/shadow
  file:
    path: /etc/shadow
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82022-5
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_owner_etc_shadow
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify Permissions on group File   [ref]rule

To properly set the permissions of /etc/passwd, run the command:

$ sudo chmod 0644 /etc/passwd

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chmod 0644 /etc/group
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
    - CCE-82032-4
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_permissions_etc_group
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure permission 0644 on /etc/group
  file:
    path: /etc/group
    mode: '0644'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82032-4
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_permissions_etc_group
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify Permissions on passwd File   [ref]rule

To properly set the permissions of /etc/passwd, run the command:

$ sudo chmod 0644 /etc/passwd

Rationale:

If the /etc/passwd file is writable by a group-owner or the world the risk of its compromise is increased. The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chmod 0644 /etc/passwd
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
    - CCE-82029-0
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_permissions_etc_passwd
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure permission 0644 on /etc/passwd
  file:
    path: /etc/passwd
    mode: '0644'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82029-0
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_permissions_etc_passwd
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

Verify Permissions on shadow File   [ref]rule

To properly set the permissions of /etc/shadow, run the command:

$ sudo chmod 0000 /etc/shadow

Rationale:

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure


chmod 0000 /etc/shadow
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
    - CCE-82042-3
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_permissions_etc_shadow
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure permission 0000 on /etc/shadow
  file:
    path: /etc/shadow
    mode: '0000'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
    - CCE-82042-3
    - CJIS-5.5.2.2
    - NIST-800-53-AC-6(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.7.c
    - configure_strategy
    - file_permissions_etc_shadow
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

8.7.d   [ref]group

Examine database access control settings, database

8.8   [ref]group

Ensure that security policies and

10.   [ref]group

Track and monitor all access to network resources and cardholder data

contains 49 rules

10.1   [ref]group

Implement audit trails to link all

contains 1 rule

Enable auditd Service   [ref]rule

The auditd service is an essential userspace component of the Linux Auditing System, as it is responsible for writing audit records to disk. The auditd service can be enabled with the following command:

$ sudo systemctl enable auditd.service

Rationale:

Without establishing what type of events occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Ensuring the auditd service is active ensures audit records generated by the kernel are appropriately recorded.

Additionally, a properly configured audit subsystem ensures that actions of individual system users can be uniquely traced to those users so they can be held accountable for their actions.

Severity:  medium

Identifiers:  CCE-27407-6

References:  4.1.1.2, 1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.3.1, 3.3.2, 3.3.6, CCI-000126, CCI-000130, CCI-000131, CCI-000132, CCI-000133, CCI-000134, CCI-000135, CCI-000154, CCI-000158, CCI-000366, CCI-001464, CCI-001487, CCI-001814, CCI-001876, CCI-002884, CCI-000169, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(C), 164.310(a)(2)(iv), 164.310(d)(2)(iii), 164.312(b), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, CIP-004-3 R3.3, CIP-007-3 R6.5, AC-2(g), AU-3, AU-10, AU-2(d), AU-12(c), AU-14(1), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, Req-10.1, SRG-OS-000037-GPOS-00015, SRG-OS-000038-GPOS-00016, SRG-OS-000039-GPOS-00017, SRG-OS-000040-GPOS-00018, SRG-OS-000041-GPOS-00019, SRG-OS-000042-GPOS-00021, SRG-OS-000051-GPOS-00024, SRG-OS-000054-GPOS-00025, SRG-OS-000122-GPOS-00063, SRG-OS-000254-GPOS-00095, SRG-OS-000255-GPOS-00096, SRG-OS-000365-GPOS-00152, SRG-OS-000392-GPOS-00172, SRG-OS-000480-GPOS-00227, SRG-OS-000062-GPOS-00031, RHEL-07-030000, SV-204503r603261_rule, SRG-OS-000037-VMM-000150, SRG-OS-000063-VMM-000310, SRG-OS-000038-VMM-000160, SRG-OS-000039-VMM-000170, SRG-OS-000040-VMM-000180, SRG-OS-000041-VMM-000190

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'auditd.service'
"$SYSTEMCTL_EXEC" start 'auditd.service'
"$SYSTEMCTL_EXEC" enable 'auditd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service auditd
  block:

    - name: Gather the package facts
      package_facts:
        manager: auto

    - name: Enable service auditd
      service:
        name: auditd
        enabled: 'yes'
        state: started
        masked: 'no'
      when:
        - '"audit" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27407-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030000
    - NIST-800-171-3.3.1
    - NIST-800-171-3.3.2
    - NIST-800-171-3.3.6
    - NIST-800-53-AC-2(g)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-14(1)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-AU-3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.1
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - service_auditd_enabled
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include enable_auditd

class enable_auditd {
  service {'auditd':
    enable => true,
    ensure => 'running',
  }
}
Remediation script:   (show)

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
      - name: auditd.service
        enabled: true

10.2   [ref]group

Implement automated audit trails for

contains 10 rules

10.2.1   [ref]group

All individual user accesses to

contains 1 rule

Ensure auditd Collects Unauthorized Access Attempts to Files (unsuccessful)   [ref]rule

At a minimum the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access

Warning:  This rule checks for multiple syscalls related to unsuccessful file modification; it was written with DISA STIG in mind. Other policies should use a separate rule for each syscall that needs to be checked. For example:
  • audit_rules_unsuccessful_file_modification_open
  • audit_rules_unsuccessful_file_modification_ftruncate
  • audit_rules_unsuccessful_file_modification_creat
Rationale:

Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	# First fix the -EACCES requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EACCES -F auid>=1000 -F auid!=unset -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(creat\|open\|truncate\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -k access"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

	# Then fix the -EPERM requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EPERM -F auid>=1000 -F auid!=unset -k *"
	# No need to change content of $GROUP variable - it's the same as for -EACCES case above
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -k access"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

10.2.2   [ref]group

All actions taken by any

contains 2 rules

Ensure auditd Collects System Administrator Actions   [ref]rule

At a minimum, the audit system should collect administrator actions for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-w /etc/sudoers -p wa -k actions
-w /etc/sudoers.d/ -p wa -k actions
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-w /etc/sudoers -p wa -k actions
-w /etc/sudoers.d/ -p wa -k actions

Rationale:

The actions taken by system administrators should be audited to keep a record of what was executed on the system, as well as, for accountability purposes.

Severity:  medium

Identifiers:  CCE-27461-3

References:  4.1.14, 1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000135, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-2(7)(b), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.2.2, Req-10.2.5.b, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, RHEL-07-030700, SV-204549r603261_rule, SRG-OS-000462-VMM-001840, SRG-OS-000471-VMM-001910

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/sudoers" "wa" "actions"
fix_audit_watch_rule "augenrules" "/etc/sudoers" "wa" "actions"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/sudoers.d/" "wa" "actions"
fix_audit_watch_rule "augenrules" "/etc/sudoers.d/" "wa" "actions"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries for sysadmin actions
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*/etc/sudoers.*$
    patterns: '*.rules'
  register: find_audit_sysadmin_actions
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/actions.rules as the recipient for the rule
  set_fact:
    all_sysadmin_actions_files:
      - /etc/audit/rules.d/actions.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_audit_sysadmin_actions.matched is defined and find_audit_sysadmin_actions.matched
      == 0
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_sysadmin_actions_files:
      - '{{ find_audit_sysadmin_actions.files | map(attribute=''path'') | list | first
        }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_audit_sysadmin_actions.matched is defined and find_audit_sysadmin_actions.matched
      > 0
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces audit rule for /etc/sudoers rule in rules.d
  lineinfile:
    path: '{{ all_sysadmin_actions_files[0] }}'
    line: -w /etc/sudoers -p wa -k actions
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces audit rule for /etc/sudoers.d rule in rules.d
  lineinfile:
    path: '{{ all_sysadmin_actions_files[0] }}'
    line: -w /etc/sudoers.d/ -p wa -k actions
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces audit rule for /etc/sudoers in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -w /etc/sudoers -p wa -k actions
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces audit rule for /etc/sudoers.d in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -w /etc/sudoers.d/ -p wa -k actions
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27461-3
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030700
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(7)(b)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - PCI-DSS-Req-10.2.5.b
    - audit_rules_sysadmin_actions
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-w%20/etc/sudoers.d/%20-p%20wa%20-k%20actions%0A-w%20/etc/sudoers%20-p%20wa%20-k%20actions%0A
        mode: 0600
        path: /etc/audit/rules.d/75-audit-sysadmin-actions.rules
        overwrite: true

Ensure auditd Collects Information on the Use of Privileged Commands   [ref]rule

The audit system should collect information about usage of privileged commands for all users and root. To find the relevant setuid / setgid programs, run the following command for each local partition PART:

$ sudo find PART -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d for each setuid / setgid program on the system, replacing the SETUID_PROG_PATH part with the full path of that setuid / setgid program in the list:
-a always,exit -F path=SETUID_PROG_PATH -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules for each setuid / setgid program on the system, replacing the SETUID_PROG_PATH part with the full path of that setuid / setgid program in the list:
-a always,exit -F path=SETUID_PROG_PATH -F auid>=1000 -F auid!=unset -F key=privileged

Warning:  This rule checks for multiple syscalls related to privileged commands; it was written with DISA STIG in mind. Other policies should use a separate rule for each syscall that needs to be checked. For example:
  • audit_rules_privileged_commands_su
  • audit_rules_privileged_commands_umount
  • audit_rules_privileged_commands_passwd
Rationale:

Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to perform remediation for 'audit_rules_privileged_commands' rule
#
# Expects two arguments:
#
# audit_tool		tool used to load audit rules
# 			One of 'auditctl' or 'augenrules'
#
# min_auid		Minimum original ID the user logged in with
#
# Example Call(s):
#
#      perform_audit_rules_privileged_commands_remediation "auditctl" "500"
#      perform_audit_rules_privileged_commands_remediation "augenrules"	"1000"
#
function perform_audit_rules_privileged_commands_remediation {
#
# Load function arguments into local variables
local tool="$1"
local min_auid="$2"

# Check sanity of the input
if [ $# -ne "2" ]
then
	echo "Usage: perform_audit_rules_privileged_commands_remediation 'auditctl | augenrules' '500 | 1000'"
	echo "Aborting."
	exit 1
fi

declare -a files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then:
# * add '/etc/audit/audit.rules'to the list of files to be inspected,
# * specify '/etc/audit/audit.rules' as the output audit file, where
#   missing rules should be inserted
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("/etc/audit/audit.rules")
	output_audit_file="/etc/audit/audit.rules"
#
# If the audit tool is 'augenrules', then:
# * add '/etc/audit/rules.d/*.rules' to the list of files to be inspected
#   (split by newline),
# * specify /etc/audit/rules.d/privileged.rules' as the output file, where
#   missing rules should be inserted
elif [ "$tool" == 'augenrules' ]
then
	readarray -t files_to_inspect < <(find /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -print)
	output_audit_file="/etc/audit/rules.d/privileged.rules"
fi

# Obtain the list of SUID/SGID binaries on the particular system (split by newline)
# into privileged_binaries array
privileged_binaries=()
readarray -t privileged_binaries < <(find / -not \( -fstype afs -o -fstype ceph -o -fstype cifs -o -fstype smb3 -o -fstype smbfs -o -fstype sshfs -o -fstype ncpfs -o -fstype ncp -o -fstype nfs -o -fstype nfs4 -o -fstype gfs -o -fstype gfs2 -o -fstype glusterfs -o -fstype gpfs -o -fstype pvfs2 -o -fstype ocfs2 -o -fstype lustre -o -fstype davfs -o -fstype fuse.sshfs \) -type f \( -perm -4000 -o -perm -2000 \) 2> /dev/null)

# Keep list of SUID/SGID binaries that have been already handled within some previous iteration
declare -a sbinaries_to_skip=()

# For each found sbinary in privileged_binaries list
for sbinary in "${privileged_binaries[@]}"
do

	# Check if this sbinary wasn't already handled in some of the previous sbinary iterations
	# Return match only if whole sbinary definition matched (not in the case just prefix matched!!!)
	if [[ $(sed -ne "\|${sbinary}|p" <<< "${sbinaries_to_skip[*]}") ]]
	then
		# If so, don't process it second time & go to process next sbinary
		continue
	fi

	# Reset the counter of inspected files when starting to check
	# presence of existing audit rule for new sbinary
	local count_of_inspected_files=0

	# Define expected rule form for this binary
	expected_rule="-a always,exit -F path=${sbinary} -F auid>=${min_auid} -F auid!=unset -F key=privileged"

	# If list of audit rules files to be inspected is empty, just add new rule and move on to next binary
	if [[ ${#files_to_inspect[@]} -eq 0 ]]; then
		echo "$expected_rule" >> "$output_audit_file"
		continue
	fi

	# Replace possible slash '/' character in sbinary definition so we could use it in sed expressions below
	sbinary_esc=${sbinary//$'/'/$'\/'}

	# For each audit rules file from the list of files to be inspected
	for afile in "${files_to_inspect[@]}"
	do

		# Search current audit rules file's content for match. Match criteria:
		# * existing rule is for the same SUID/SGID binary we are currently processing (but
		#   can contain multiple -F path= elements covering multiple SUID/SGID binaries)
		# * existing rule contains all arguments from expected rule form (though can contain
		#   them in arbitrary order)
	
		base_search=$(sed -e '/-a always,exit/!d' -e '/-F path='"${sbinary_esc}"'[^[:graph:]]/!d'		\
				-e '/-F path=[^[:space:]]\+/!d'						\
				-e '/-F auid>='"${min_auid}"'/!d' -e '/-F auid!=\(4294967295\|unset\)/!d'	\
				-e '/-k \|-F key=/!d' "$afile")

		# Increase the count of inspected files for this sbinary
		count_of_inspected_files=$((count_of_inspected_files + 1))


		# Search current audit rules file's content for presence of rule pattern for this sbinary
		if [[ $base_search ]]
		then

			# Current audit rules file already contains rule for this binary =>
			# Store the exact form of found rule for this binary for further processing
			concrete_rule=$base_search

			# Select all other SUID/SGID binaries possibly also present in the found rule

			readarray -t handled_sbinaries < <(grep -o -e "-F path=[^[:space:]]\+" <<< "$concrete_rule")
			handled_sbinaries=("${handled_sbinaries[@]//-F path=/}")

			# Merge the list of such SUID/SGID binaries found in this iteration with global list ignoring duplicates
			readarray -t sbinaries_to_skip < <(for i in "${sbinaries_to_skip[@]}" "${handled_sbinaries[@]}"; do echo "$i"; done | sort -du)

			# if there is a -F perm flag, remove it
			if grep -q '.*-F\s\+perm=[rwxa]\+.*' <<< "$concrete_rule"; then

				# Separate concrete_rule into three sections using hash '#'
				# sign as a delimiter around rule's permission section borders
				# note that the trailing space after perm flag is captured because there would be 
				# two consecutive spaces after joining remaining parts of the rule together
				concrete_rule="$(echo "$concrete_rule" | sed -n "s/\(.*\)\+\(-F perm=[rwax]\+\ \?\)\+/\1#\2#/p")"

				# Split concrete_rule into head, perm, and tail sections using hash '#' delimiter
				rule_head=$(cut -d '#' -f 1 <<< "$concrete_rule")
				rule_perm=$(cut -d '#' -f 2 <<< "$concrete_rule")
				rule_tail=$(cut -d '#' -f 3 <<< "$concrete_rule")

				# Remove permissions section from existing rule in the file
				sed -i "s#${rule_head}\(.*\)${rule_tail}#${rule_head}${rule_tail}#" "$afile"
			fi
		# If the required audit rule for particular sbinary wasn't found yet, insert it under following conditions:
		#
		# * in the "auditctl" mode of operation insert particular rule each time
		#   (because in this mode there's only one file -- /etc/audit/audit.rules to be inspected for presence of this rule),
		#
		# * in the "augenrules" mode of operation insert particular rule only once and only in case we have already
		#   searched all of the files from /etc/audit/rules.d/*.rules location (since that audit rule can be defined
		#   in any of those files and if not, we want it to be inserted only once into /etc/audit/rules.d/privileged.rules file)
		#
		elif [ "$tool" == "auditctl" ] || [[ "$tool" == "augenrules" && $count_of_inspected_files -eq "${#files_to_inspect[@]}" ]]
		then

			# Check if this sbinary wasn't already handled in some of the previous afile iterations
			# Return match only if whole sbinary definition matched (not in the case just prefix matched!!!)
			if [[ ! $(sed -ne "\|${sbinary}|p" <<< "${sbinaries_to_skip[*]}") ]]
			then
				# Current audit rules file's content doesn't contain expected rule for this
				# SUID/SGID binary yet => append it
				echo "$expected_rule" >> "$output_audit_file"
			fi

			continue
		fi

	done

done
}
perform_audit_rules_privileged_commands_remediation "auditctl" "1000"
perform_audit_rules_privileged_commands_remediation "augenrules" "1000"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Search for privileged commands
  shell: |
    set -o pipefail
    find / -not \( -fstype afs -o -fstype ceph -o -fstype cifs -o -fstype smb3 -o -fstype smbfs -o -fstype sshfs -o -fstype ncpfs -o -fstype ncp -o -fstype nfs -o -fstype nfs4 -o -fstype gfs -o -fstype gfs2 -o -fstype glusterfs -o -fstype gpfs -o -fstype pvfs2 -o -fstype ocfs2 -o -fstype lustre -o -fstype davfs -o -fstype fuse.sshfs \) -type f \( -perm -4000 -o -perm -2000 \) 2> /dev/null
  args:
    warn: false
    executable: /bin/bash
  check_mode: false
  register: find_result
  changed_when: false
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27437-3
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path={{ item }} .*$
    patterns: '*.rules'
  with_items:
    - '{{ find_result.stdout_lines }}'
  register: files_result
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27437-3
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Overwrites the rule in rules.d
  lineinfile:
    path: '{{ item.1.path }}'
    line: -a always,exit -F path={{ item.0.item }} -F auid>=1000 -F auid!=unset -F
      key=privileged
    create: false
    regexp: ^.*path={{ item.0.item }} .*$
  with_subelements:
    - '{{ files_result.results }}'
    - files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27437-3
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Adds the rule in rules.d
  lineinfile:
    path: /etc/audit/rules.d/privileged.rules
    line: -a always,exit -F path={{ item.item }} -F auid>=1000 -F auid!=unset -F key=privileged
    create: true
  with_items:
    - '{{ files_result.results }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - files_result.results is defined and item.matched == 0
  tags:
    - CCE-27437-3
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path={{ item.item }} -F auid>=1000 -F auid!=unset -F key=privileged
    create: true
    regexp: ^.*path={{ item.item }} .*$
  with_items:
    - '{{ files_result.results }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27437-3
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

10.2.3   [ref]group

Access to all audit trails

contains 2 rules

Record Attempts to Alter Process and Session Initiation Information   [ref]rule

The audit system already collects process information for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d in order to watch for attempted manual edits of files involved in storing such process information:

-w /var/run/utmp -p wa -k session
-w /var/log/btmp -p wa -k session
-w /var/log/wtmp -p wa -k session
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file in order to watch for attempted manual edits of files involved in storing such process information:
-w /var/run/utmp -p wa -k session
-w /var/log/btmp -p wa -k session
-w /var/log/wtmp -p wa -k session

Rationale:

Manual editing of these files may indicate nefarious activity, such as an attacker attempting to remove evidence of an intrusion.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/var/run/utmp" "wa" "session"
fix_audit_watch_rule "augenrules" "/var/run/utmp" "wa" "session"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/var/log/btmp" "wa" "session"
fix_audit_watch_rule "augenrules" "/var/log/btmp" "wa" "session"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/var/log/wtmp" "wa" "session"
fix_audit_watch_rule "augenrules" "/var/log/wtmp" "wa" "session"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Check if watch rule for /var/run/utmp already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/var/run/utmp\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key session
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)session$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use /etc/audit/rules.d/session.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/session.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /var/run/utmp in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /var/run/utmp -p wa -k session
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Check if watch rule for /var/run/utmp already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/var/run/utmp\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /var/run/utmp in /etc/audit/audit.rules
  lineinfile:
    line: -w /var/run/utmp -p wa -k session
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Check if watch rule for /var/log/btmp already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/var/log/btmp\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key session
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)session$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use /etc/audit/rules.d/session.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/session.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /var/log/btmp in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /var/log/btmp -p wa -k session
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Check if watch rule for /var/log/btmp already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/var/log/btmp\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /var/log/btmp in /etc/audit/audit.rules
  lineinfile:
    line: -w /var/log/btmp -p wa -k session
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Check if watch rule for /var/log/wtmp already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/var/log/wtmp\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key session
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)session$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use /etc/audit/rules.d/session.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/session.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /var/log/wtmp in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /var/log/wtmp -p wa -k session
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Check if watch rule for /var/log/wtmp already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/var/log/wtmp\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /var/log/wtmp in /etc/audit/audit.rules
  lineinfile:
    line: -w /var/log/wtmp -p wa -k session
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27301-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.3
    - audit_rules_session_events
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---


apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%0A-w%20/var/run/utmp%20-p%20wa%20-k%20session%0A-w%20/var/log/btmp%20-p%20wa%20-k%20session%0A-w%20/var/log/wtmp%20-p%20wa%20-k%20session%0A
        mode: 0600
        path: /etc/audit/rules.d/75-audit-session-events.rules
        overwrite: true

10.2.4   [ref]group

Invalid logical access attempts

contains 1 rule

10.2.5   [ref]group

Use of and changes to

contains 1 rule

10.2.5.a   [ref]group

Verify use of identification and authentication

10.2.5.b   [ref]group

Verify all elevation of privileges is logged.

10.2.5.c   [ref]group

Verify all changes, additions, or deletions to any account

Record Events that Modify User/Group Information   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, in order to capture events that modify account changes:

-w /etc/group -p wa -k audit_rules_usergroup_modification
-w /etc/passwd -p wa -k audit_rules_usergroup_modification
-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
-w /etc/shadow -p wa -k audit_rules_usergroup_modification
-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification

If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, in order to capture events that modify account changes:
-w /etc/group -p wa -k audit_rules_usergroup_modification
-w /etc/passwd -p wa -k audit_rules_usergroup_modification
-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
-w /etc/shadow -p wa -k audit_rules_usergroup_modification
-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification

Warning:  This rule checks for multiple syscalls related to account changes; it was written with DISA STIG in mind. Other policies should use a separate rule for each syscall that needs to be checked. For example:
  • audit_rules_usergroup_modification_group
  • audit_rules_usergroup_modification_gshadow
  • audit_rules_usergroup_modification_passwd
Rationale:

In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

Severity:  medium

Identifiers:  CCE-27192-4

References:  1, 11, 12, 13, 14, 15, 16, 18, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS06.03, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000018, CCI-000130, CCI-000172, CCI-001403, CCI-002130, 4.2.3.10, 4.3.2.6.7, 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.8, 4.3.3.6.6, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-3 R2.2.2, CIP-004-3 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, Req-10.2.5, SRG-OS-000004-GPOS-00004, SRG-OS-000037-GPOS-00015, SRG-OS-000042-GPOS-00020, SRG-OS-000239-GPOS-00089, SRG-OS-000241-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000476-GPOS-00221, RHEL-07-030710, SV-204550r603261_rule

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/group" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "augenrules" "/etc/group" "wa" "audit_rules_usergroup_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/passwd" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "augenrules" "/etc/passwd" "wa" "audit_rules_usergroup_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/gshadow" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "augenrules" "/etc/gshadow" "wa" "audit_rules_usergroup_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/shadow" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "augenrules" "/etc/shadow" "wa" "audit_rules_usergroup_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/security/opasswd" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "augenrules" "/etc/security/opasswd" "wa" "audit_rules_usergroup_modification"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

10.2.6   [ref]group

Initialization, stopping, or

10.2.7   [ref]group

Creation and deletion of system-

contains 3 rules

Ensure auditd Collects Information on Exporting to Media (successful)   [ref]rule

At a minimum, the audit system should collect media exportation events for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:

-a always,exit -F arch=ARCH -S mount -F auid>=1000 -F auid!=unset -F key=export
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S mount -F auid>=1000 -F auid!=unset -F key=export

Rationale:

The unauthorized exportation of data to external media could result in an information leak where classified information, Privacy Act information, and intellectual property could be lost. An audit trail should be created each time a filesystem is mounted to help identify and guard against information loss.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S mount.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S mount -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit mount tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_mount
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_mount.matched is defined and find_mount.matched == 0
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_mount.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_mount.matched is defined and find_mount.matched > 0
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the mount rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S mount -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the mount rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S mount -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the mount rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S mount -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the mount rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S mount -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27447-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030740
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_media_export
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Ensure auditd Collects File Deletion Events by User   [ref]rule

At a minimum the audit system should collect file deletion events for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:

-a always,exit -F arch=ARCH -S rmdir,unlink,unlinkat,rename,renameat -F auid>=1000 -F auid!=unset -F key=delete
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S rmdir,unlink,unlinkat,rename -S renameat -F auid>=1000 -F auid!=unset -F key=delete

Warning:  This rule checks for multiple syscalls related to file deletion; it was written with DISA STIG in mind. Other policies should use a separate rule for each syscall that needs to be checked. For example:
  • audit_rules_file_deletion_events_rmdir
  • audit_rules_file_deletion_events_unlink
  • audit_rules_file_deletion_events_unlinkat
Rationale:

Auditing file deletions will create an audit trail for files that are removed from the system. The audit trail could aid in system troubleshooting, as well as, detecting malicious processes that attempt to delete log files to conceal their presence.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=1000 -F auid!=unset -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(rmdir\|unlink\|rename\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>=1000 -F auid!=unset -k delete"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Ensure auditd Collects Information on Kernel Module Loading and Unloading   [ref]rule

To capture kernel module loading and unloading events, use following lines, setting ARCH to either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:

-a always,exit -F arch=ARCH -S init_module,finit_module,delete_module -F key=modules
The place to add the lines depends on a way auditd daemon is configured. If it is configured to use the augenrules program (the default), add the lines to a file with suffix .rules in the directory /etc/audit/rules.d. If the auditd daemon is configured to use the auditctl utility, add the lines to file /etc/audit/audit.rules.

Rationale:

The addition/removal of kernel modules can be used to alter the behavior of the kernel and potentially introduce malicious code into kernel space. It is important to have an audit trail of modules that have been introduced into the kernel.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit and 64-bit kernel syscall numbers not always line up =>
#       it's required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule.
#       (See `man 7 audit.rules` for details )
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
        GROUP="modules"
        PATTERN="-a always,exit -F arch=$ARCH -S init_module -S delete_module -S finit_module \(-F key=\|-k \).*"
        FULL_RULE="-a always,exit -F arch=$ARCH -S init_module -S delete_module -S finit_module -k modules"
        # Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
        fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
        fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27129-6
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_kernel_module_loading
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Perform remediation of Audit rules for kernel module loading for x86 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key modules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)modules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/modules.rules as the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/modules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27129-6
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_kernel_module_loading
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Perform remediation of Audit rules for kernel module loading for x86_64 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b64_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b64_rules_d="{{ audit_syscalls_found_b64_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key modules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)modules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/modules.rules as the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/modules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b64_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b64_audit_rules="{{ audit_syscalls_found_b64_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_audit_rules < audit_syscalls_number_of_syscalls
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch == "b64"
  tags:
    - CCE-27129-6
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_kernel_module_loading
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

10.3   [ref]group

Record at least the following audit

contains 1 rule

10.3.1   [ref]group

User identification

10.3.2   [ref]group

Type of event

10.3.3   [ref]group

Date and time

10.3.4   [ref]group

Success or failure indication

10.3.5   [ref]group

Origination of event

10.3.6   [ref]group

Identity or name of affected

Enable Auditing for Processes Which Start Prior to the Audit Daemon   [ref]rule

To ensure all processes can be audited, even those which start prior to the audit daemon, add the argument audit=1 to the default GRUB 2 command line for the Linux operating system in /etc/default/grub, so that the line looks similar to

GRUB_CMDLINE_LINUX="... audit=1 ..."
In case the GRUB_DISABLE_RECOVERY is set to true, then the parameter should be added to the GRUB_CMDLINE_LINUX_DEFAULT instead.

Warning:  The GRUB 2 configuration file, grub.cfg, is automatically updated each time a new kernel is installed. Note that any changes to /etc/default/grub require rebuilding the grub.cfg file. To update the GRUB 2 configuration file manually, use the
grub2-mkconfig -o
command as follows:
  • On BIOS-based machines, issue the following command as root:
    ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
  • On UEFI-based machines, issue the following command as root:
    ~]# grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
Rationale:

Each process on the system carries an "auditable" flag which indicates whether its activities can be audited. Although auditd takes care of enabling this for all processes which launch after it does, adding the kernel argument ensures it is set for every process during boot.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { rpm --quiet -q grub2-common; }; then

# Correct the form of default kernel command line in GRUB
if grep -q '^GRUB_CMDLINE_LINUX=.*audit=.*"'  '/etc/default/grub' ; then
	# modify the GRUB command-line if an audit= arg already exists
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)audit=[^[:space:]]*\(.*"\)/\1 audit=1 \2/'  '/etc/default/grub'
else
	# no audit=arg is present, append it
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 audit=1"/'  '/etc/default/grub'
fi


# Correct the form of kernel command line for each installed kernel in the bootloader
grubby --update-kernel=ALL --args="audit=1"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:medium
Disruption:low
Reboot:true
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-27212-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-14(1)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IR-5(1)
    - PCI-DSS-Req-10.3
    - grub2_audit_argument
    - low_disruption
    - medium_complexity
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: check audit argument exists
  command: grep 'GRUB_CMDLINE_LINUX.*audit=' /etc/default/grub
  failed_when: false
  register: argcheck
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - '"grub2-common" in ansible_facts.packages'
  tags:
    - CCE-27212-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-14(1)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IR-5(1)
    - PCI-DSS-Req-10.3
    - grub2_audit_argument
    - low_disruption
    - medium_complexity
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: replace existing audit argument
  replace:
    path: /etc/default/grub
    regexp: audit=\w+
    replace: audit=1
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - '"grub2-common" in ansible_facts.packages'
    - argcheck.rc == 0
  tags:
    - CCE-27212-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-14(1)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IR-5(1)
    - PCI-DSS-Req-10.3
    - grub2_audit_argument
    - low_disruption
    - medium_complexity
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: add audit argument
  replace:
    path: /etc/default/grub
    regexp: (GRUB_CMDLINE_LINUX=.*)"
    replace: \1 audit=1"
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - '"grub2-common" in ansible_facts.packages'
    - argcheck.rc != 0
  tags:
    - CCE-27212-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-14(1)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IR-5(1)
    - PCI-DSS-Req-10.3
    - grub2_audit_argument
    - low_disruption
    - medium_complexity
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: update bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="audit=1"
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - '"grub2-common" in ansible_facts.packages'
  tags:
    - CCE-27212-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AC-17(1)
    - NIST-800-53-AU-10
    - NIST-800-53-AU-14(1)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IR-5(1)
    - PCI-DSS-Req-10.3
    - grub2_audit_argument
    - low_disruption
    - medium_complexity
    - medium_severity
    - reboot_required
    - restrict_strategy

10.4   [ref]group

Using time-synchronization

contains 8 rules

10.4.1   [ref]group

Critical systems have the

contains 1 rule

10.4.1.a   [ref]group

Examine the process for acquiring, distributing and

10.4.1.b   [ref]group

Observe the time-related system-parameter settings for

Specify a Remote NTP Server   [ref]rule

Depending on specific functional requirements of a concrete production environment, the Red Hat Enterprise Linux 7 system can be configured to utilize the services of the chronyd NTP daemon (the default), or services of the ntpd NTP daemon. Refer to https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/System_Administrators_Guide/ch-Configuring_NTP_Using_the_chrony_Suite.html for more detailed comparison of the features of both of the choices, and for further guidance how to choose between the two NTP daemons.
To specify a remote NTP server for time synchronization, perform the following:

  • if the system is configured to use the chronyd as the NTP daemon (the default), edit the file /etc/chrony.conf as follows,
  • if the system is configured to use the ntpd as the NTP daemon, edit the file /etc/ntp.conf as documented below.
Add or correct the following lines, substituting the IP or hostname of a remote NTP server for ntpserver:
server ntpserver
This instructs the NTP software to contact that remote server to obtain time data.

Rationale:

Synchronizing with an NTP server makes it possible to collate system logs from multiple sources or correlate computer events with real time events.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_multiple_time_servers="0.rhel.pool.ntp.org,1.rhel.pool.ntp.org,2.rhel.pool.ntp.org,3.rhel.pool.ntp.org"



config_file="/etc/ntp.conf"
/usr/sbin/pidof ntpd || config_file="/etc/chrony.conf"

if ! grep -q ^server "$config_file" ; then
  if ! grep -q '#[[:space:]]*server' "$config_file" ; then
    for server in $(echo "$var_multiple_time_servers" | tr ',' '\n') ; do
      printf '\nserver %s' "$server" >> "$config_file"
    done
  else
    sed -i 's/#[ \t]*server/server/g' "$config_file"
  fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Allow%20for%20extra%20configuration%20files.%20This%20is%20useful%0A%23%20for%20admins%20specifying%20their%20own%20NTP%20servers%0Ainclude%20/etc/chrony.d/%2A.conf%0A%0A%23%20Set%20chronyd%20as%20client-only.%0Aport%200%0A%0A%23%20Disable%20chronyc%20from%20the%20network%0Acmdport%200%0A%0A%23%20Record%20the%20rate%20at%20which%20the%20system%20clock%20gains/losses%20time.%0Adriftfile%20/var/lib/chrony/drift%0A%0A%23%20Allow%20the%20system%20clock%20to%20be%20stepped%20in%20the%20first%20three%20updates%0A%23%20if%20its%20offset%20is%20larger%20than%201%20second.%0Amakestep%201.0%203%0A%0A%23%20Enable%20kernel%20synchronization%20of%20the%20real-time%20clock%20%28RTC%29.%0Artcsync%0A%0A%23%20Enable%20hardware%20timestamping%20on%20all%20interfaces%20that%20support%20it.%0A%23hwtimestamp%20%2A%0A%0A%23%20Increase%20the%20minimum%20number%20of%20selectable%20sources%20required%20to%20adjust%0A%23%20the%20system%20clock.%0A%23minsources%202%0A%0A%23%20Allow%20NTP%20client%20access%20from%20local%20network.%0A%23allow%20192.168.0.0/16%0A%0A%23%20Serve%20time%20even%20if%20not%20synchronized%20to%20a%20time%20source.%0A%23local%20stratum%2010%0A%0A%23%20Require%20authentication%20%28nts%20or%20key%20option%29%20for%20all%20NTP%20sources.%0A%23authselectmode%20require%0A%0A%23%20Specify%20file%20containing%20keys%20for%20NTP%20authentication.%0Akeyfile%20/etc/chrony.keys%0A%0A%23%20Insert/delete%20leap%20seconds%20by%20slewing%20instead%20of%20stepping.%0A%23leapsecmode%20slew%0A%0A%23%20Get%20TAI-UTC%20offset%20and%20leap%20seconds%20from%20the%20system%20tz%20database.%0Aleapsectz%20right/UTC%0A%0A%23%20Specify%20directory%20for%20log%20files.%0Alogdir%20/var/log/chrony%0A%0A%23%20Select%20which%20information%20is%20logged.%0A%23log%20measurements%20statistics%20tracking
        mode: 420
        overwrite: true
        path: /etc/chrony.conf
      - contents:
          source: data:,
        mode: 420
        overwrite: true
        path: /etc/chrony.d/.mco-keep

10.4.2   [ref]group

Time data is protected.

contains 5 rules

10.4.2.a   [ref]group

Examine system configurations and time-

10.4.2.b   [ref]group

Examine system configurations, time synchronization

contains 5 rules

Record attempts to alter time through adjtimex   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S adjtimex -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S adjtimex -F key=audit_time_rules
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S adjtimex -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S adjtimex -F key=audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}


# Function to perform remediation for the 'adjtimex', 'settimeofday', and 'stime' audit
# system calls on RHEL, Fedora or OL systems.
# Remediation performed for both possible tools: 'auditctl' and 'augenrules'.
#
# Note: 'stime' system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
# therefore excluded from the list of time group system calls to be audited on this arch
#
# Example Call:
#
#      perform_audit_adjtimex_settimeofday_stime_remediation
#
function perform_audit_adjtimex_settimeofday_stime_remediation {

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	PATTERN="-a always,exit -F arch=${ARCH} -S .* -k *"
	# Create expected audit group and audit rule form for particular system call & architecture
	if [ ${ARCH} = "b32" ]
	then
		# stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
		# so append it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\|stime\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -S stime -k audit_time_rules"
	elif [ ${ARCH} = "b64" ]
	then
		# stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
		# therefore don't add it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -k audit_time_rules"
	fi
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

}
perform_audit_adjtimex_settimeofday_stime_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27290-6
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_adjtimex
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Perform remediation of Audit rules for adjtimex for x86 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - adjtimex

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_time_rules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_time_rules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_time_rules.rules as the recipient for the
        rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_time_rules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - adjtimex

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27290-6
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_adjtimex
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Perform remediation of Audit rules for adjtimex for x86_64 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - adjtimex

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b64_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b64_rules_d="{{ audit_syscalls_found_b64_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_time_rules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_time_rules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_time_rules.rules as the recipient for the
        rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_time_rules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - adjtimex

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b64_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b64_audit_rules="{{ audit_syscalls_found_b64_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_audit_rules < audit_syscalls_number_of_syscalls
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch == "b64"
  tags:
    - CCE-27290-6
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_adjtimex
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20adjtimex%20-k%20audit_time_rules%0A-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20adjtimex%20-k%20audit_time_rules%0A
        mode: 0600
        path: /etc/audit/rules.d/75-syscall-adjtimex.rules
        overwrite: true

Record Attempts to Alter Time Through clock_settime   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S clock_settime -F a0=0x0 -F key=time-change
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S clock_settime -F a0=0x0 -F key=time-change
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S clock_settime -F a0=0x0 -F key=time-change
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S clock_settime -F a0=0x0 -F key=time-change
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S clock_settime -F a0=.* \(-F key=\|-k \).*"
	GROUP="clock_settime"
	FULL_RULE="-a always,exit -F arch=$ARCH -S clock_settime -F a0=0x0 -k time-change"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27219-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_clock_settime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Perform remediation of Audit rules for clock_settime for x86 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - clock_settime

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(?:-F[\s]+a0=0x0[\s]+)(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key time-change
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)time-change$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/time-change.rules as the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/time-change.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -F a0=0x0 -k time-change' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - clock_settime

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(?:-F[\s]+a0=0x0[\s]+)(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -F a0=0x0 -k time-change' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27219-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_clock_settime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Perform remediation of Audit rules for clock_settime for x86_64 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - clock_settime

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(?:-F[\s]+a0=0x0[\s]+)(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b64_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b64_rules_d="{{ audit_syscalls_found_b64_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key time-change
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)time-change$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/time-change.rules as the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/time-change.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -F a0=0x0 -k time-change' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - clock_settime

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(?:-F[\s]+a0=0x0[\s]+)(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b64_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b64_audit_rules="{{ audit_syscalls_found_b64_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -F a0=0x0 -k time-change' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_audit_rules < audit_syscalls_number_of_syscalls
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch == "b64"
  tags:
    - CCE-27219-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_clock_settime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20clock_settime%20-F%20a0%3D0x0%20-k%20time-change%0A-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20clock_settime%20-F%20a0%3D0x0%20-k%20time-change%0A
        mode: 0600
        path: /etc/audit/rules.d/75-syscall-clock-settime.rules
        overwrite: true

Record attempts to alter time through settimeofday   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S settimeofday -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S settimeofday -F key=audit_time_rules
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S settimeofday -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S settimeofday -F key=audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}


# Function to perform remediation for the 'adjtimex', 'settimeofday', and 'stime' audit
# system calls on RHEL, Fedora or OL systems.
# Remediation performed for both possible tools: 'auditctl' and 'augenrules'.
#
# Note: 'stime' system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
# therefore excluded from the list of time group system calls to be audited on this arch
#
# Example Call:
#
#      perform_audit_adjtimex_settimeofday_stime_remediation
#
function perform_audit_adjtimex_settimeofday_stime_remediation {

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	PATTERN="-a always,exit -F arch=${ARCH} -S .* -k *"
	# Create expected audit group and audit rule form for particular system call & architecture
	if [ ${ARCH} = "b32" ]
	then
		# stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
		# so append it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\|stime\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -S stime -k audit_time_rules"
	elif [ ${ARCH} = "b64" ]
	then
		# stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
		# therefore don't add it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -k audit_time_rules"
	fi
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

}
perform_audit_adjtimex_settimeofday_stime_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27216-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_settimeofday
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Perform remediation of Audit rules for settimeofday for x86 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - settimeofday

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_time_rules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_time_rules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_time_rules.rules as the recipient for the
        rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_time_rules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - settimeofday

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27216-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_settimeofday
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Perform remediation of Audit rules for settimeofday for x86_64 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - settimeofday

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b64_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b64_rules_d="{{ audit_syscalls_found_b64_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_time_rules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_time_rules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_time_rules.rules as the recipient for the
        rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_time_rules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - settimeofday

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b64_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b64_audit_rules="{{ audit_syscalls_found_b64_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_audit_rules < audit_syscalls_number_of_syscalls
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch == "b64"
  tags:
    - CCE-27216-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_settimeofday
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20settimeofday%20-k%20audit_time_rules%0A-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20settimeofday%20-k%20audit_time_rules%0A
        mode: 0600
        path: /etc/audit/rules.d/75-syscall-settimeofday.rules
        overwrite: true

Record Attempts to Alter Time Through stime   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d for both 32 bit and 64 bit systems:

-a always,exit -F arch=b32 -S stime -F key=audit_time_rules
Since the 64 bit version of the "stime" system call is not defined in the audit lookup table, the corresponding "-F arch=b64" form of this rule is not expected to be defined on 64 bit systems (the aforementioned "-F arch=b32" stime rule form itself is sufficient for both 32 bit and 64 bit systems). If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file for both 32 bit and 64 bit systems:
-a always,exit -F arch=b32 -S stime -F key=audit_time_rules
Since the 64 bit version of the "stime" system call is not defined in the audit lookup table, the corresponding "-F arch=b64" form of this rule is not expected to be defined on 64 bit systems (the aforementioned "-F arch=b32" stime rule form itself is sufficient for both 32 bit and 64 bit systems). The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined system calls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}


# Function to perform remediation for the 'adjtimex', 'settimeofday', and 'stime' audit
# system calls on RHEL, Fedora or OL systems.
# Remediation performed for both possible tools: 'auditctl' and 'augenrules'.
#
# Note: 'stime' system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
# therefore excluded from the list of time group system calls to be audited on this arch
#
# Example Call:
#
#      perform_audit_adjtimex_settimeofday_stime_remediation
#
function perform_audit_adjtimex_settimeofday_stime_remediation {

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	PATTERN="-a always,exit -F arch=${ARCH} -S .* -k *"
	# Create expected audit group and audit rule form for particular system call & architecture
	if [ ${ARCH} = "b32" ]
	then
		# stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
		# so append it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\|stime\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -S stime -k audit_time_rules"
	elif [ ${ARCH} = "b64" ]
	then
		# stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
		# therefore don't add it to the list of time group system calls to be audited
		GROUP="\(adjtimex\|settimeofday\)"
		FULL_RULE="-a always,exit -F arch=${ARCH} -S adjtimex -S settimeofday -k audit_time_rules"
	fi
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

}
perform_audit_adjtimex_settimeofday_stime_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Perform remediation of Audit rules for stime syscall for x86 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - stime

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_time_rules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_time_rules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_time_rules.rules as the recipient for the
        rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_time_rules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - stime

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_time_rules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27299-7
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_stime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-a%20always%2Cexit%20-F%20arch%3Db64%20-S%20stime%20-k%20audit_time_rules%0A-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20stime%20-k%20audit_time_rules%0A
        mode: 0600
        path: /etc/audit/rules.d/75-syscall-stime.rules
        overwrite: true

Record Attempts to Alter the localtime File   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-w /etc/localtime -p wa -k audit_time_rules
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-w /etc/localtime -p wa -k audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport and should always be used.

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
fix_audit_watch_rule "augenrules" "/etc/localtime" "wa" "audit_time_rules"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Check if watch rule for /etc/localtime already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/localtime\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_time_rules
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_time_rules$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/audit_time_rules.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/audit_time_rules.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/localtime in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/localtime -p wa -k audit_time_rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/localtime already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/localtime\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/localtime in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/localtime -p wa -k audit_time_rules
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27310-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.4.2.b
    - audit_rules_time_watch_localtime
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-w%20/etc/localtime%20-p%20wa%20-k%20audit_time_rules%0A
        mode: 0600
        path: /etc/audit/rules.d/75-etclocaltime-wa-audit_time_rules.rules
        overwrite: true

10.4.3   [ref]group

Time settings are received from

contains 1 rule

Specify Additional Remote NTP Servers   [ref]rule

Depending on specific functional requirements of a concrete production environment, the Red Hat Enterprise Linux 7 system can be configured to utilize the services of the chronyd NTP daemon (the default), or services of the ntpd NTP daemon. Refer to https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/System_Administrators_Guide/ch-Configuring_NTP_Using_the_chrony_Suite.html for more detailed comparison of the features of both of the choices, and for further guidance how to choose between the two NTP daemons.
Additional NTP servers can be specified for time synchronization. To do so, perform the following:

  • if the system is configured to use the chronyd as the NTP daemon (the default), edit the file /etc/chrony.conf as follows,
  • if the system is configured to use the ntpd as the NTP daemon, edit the file /etc/ntp.conf as documented below.
Add additional lines of the following form, substituting the IP address or hostname of a remote NTP server for ntpserver:
server ntpserver

Rationale:

Specifying additional NTP servers increases the availability of accurate time data, in the event that one of the specified servers becomes unavailable. This is typical for a system acting as an NTP server for other systems.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_multiple_time_servers="0.rhel.pool.ntp.org,1.rhel.pool.ntp.org,2.rhel.pool.ntp.org,3.rhel.pool.ntp.org"



config_file="/etc/ntp.conf"
/usr/sbin/pidof ntpd || config_file="/etc/chrony.conf"

if ! [ "$(grep -c '^server' "$config_file")" -gt 1 ] ; then
  if ! grep -q '#[[:space:]]*server' "$config_file" ; then
    for server in $(echo "$var_multiple_time_servers" | tr ',' '\n') ; do
      printf '\nserver %s' "$server" >> "$config_file"
    done
  else
    sed -i 's/#[ \t]*server/server/g' "$config_file"
  fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Allow%20for%20extra%20configuration%20files.%20This%20is%20useful%0A%23%20for%20admins%20specifying%20their%20own%20NTP%20servers%0Ainclude%20/etc/chrony.d/%2A.conf%0A%0A%23%20Set%20chronyd%20as%20client-only.%0Aport%200%0A%0A%23%20Disable%20chronyc%20from%20the%20network%0Acmdport%200%0A%0A%23%20Record%20the%20rate%20at%20which%20the%20system%20clock%20gains/losses%20time.%0Adriftfile%20/var/lib/chrony/drift%0A%0A%23%20Allow%20the%20system%20clock%20to%20be%20stepped%20in%20the%20first%20three%20updates%0A%23%20if%20its%20offset%20is%20larger%20than%201%20second.%0Amakestep%201.0%203%0A%0A%23%20Enable%20kernel%20synchronization%20of%20the%20real-time%20clock%20%28RTC%29.%0Artcsync%0A%0A%23%20Enable%20hardware%20timestamping%20on%20all%20interfaces%20that%20support%20it.%0A%23hwtimestamp%20%2A%0A%0A%23%20Increase%20the%20minimum%20number%20of%20selectable%20sources%20required%20to%20adjust%0A%23%20the%20system%20clock.%0A%23minsources%202%0A%0A%23%20Allow%20NTP%20client%20access%20from%20local%20network.%0A%23allow%20192.168.0.0/16%0A%0A%23%20Serve%20time%20even%20if%20not%20synchronized%20to%20a%20time%20source.%0A%23local%20stratum%2010%0A%0A%23%20Require%20authentication%20%28nts%20or%20key%20option%29%20for%20all%20NTP%20sources.%0A%23authselectmode%20require%0A%0A%23%20Specify%20file%20containing%20keys%20for%20NTP%20authentication.%0Akeyfile%20/etc/chrony.keys%0A%0A%23%20Insert/delete%20leap%20seconds%20by%20slewing%20instead%20of%20stepping.%0A%23leapsecmode%20slew%0A%0A%23%20Get%20TAI-UTC%20offset%20and%20leap%20seconds%20from%20the%20system%20tz%20database.%0Aleapsectz%20right/UTC%0A%0A%23%20Specify%20directory%20for%20log%20files.%0Alogdir%20/var/log/chrony%0A%0A%23%20Select%20which%20information%20is%20logged.%0A%23log%20measurements%20statistics%20tracking
        mode: 420
        overwrite: true
        path: /etc/chrony.conf
      - contents:
          source: data:,
        mode: 420
        overwrite: true
        path: /etc/chrony.d/.mco-keep

Enable the NTP Daemon   [ref]rule

Run the following command to determine the current status of the chronyd service:

$ systemctl is-active chronyd
If the service is running, it should return the following:
active
Note: The chronyd daemon is enabled by default.

Run the following command to determine the current status of the ntpd service:
$ systemctl is-active ntpd
If the service is running, it should return the following:
active
Note: The ntpd daemon is not enabled by default. Though as mentioned in the previous sections in certain environments the ntpd daemon might be preferred to be used rather than the chronyd one. Refer to: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/System_Administrators_Guide/ch-Configuring_NTP_Using_the_chrony_Suite.html for guidance which NTP daemon to choose depending on the environment used.

Rationale:

Enabling some of chronyd or ntpd services ensures that the NTP daemon will be running and that the system will synchronize its time to any servers specified. This is important whether the system is configured to be a client (and synchronize only its own clock) or it is also acting as an NTP server to other systems. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

The chronyd and ntpd NTP daemons offer all of the functionality of ntpdate, which is now deprecated.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if rpm --quiet -q "chrony" ; then
    if ! /usr/sbin/pidof ntpd ; then
        /usr/bin/systemctl enable "chronyd"
        /usr/bin/systemctl start "chronyd"
        # The service may not be running because it has been started and failed,
        # so let's reset the state so OVAL checks pass.
        # Service should be 'inactive', not 'failed' after reboot though.
        /usr/bin/systemctl reset-failed "chronyd"
    fi
elif rpm --quiet -q "ntp" ; then
    /usr/bin/systemctl enable "ntpd"
    /usr/bin/systemctl start "ntpd"
    # The service may not be running because it has been started and failed,
    # so let's reset the state so OVAL checks pass.
    # Service should be 'inactive', not 'failed' after reboot though.
    /usr/bin/systemctl reset-failed "ntpd"
else
    if ! rpm -q --quiet "chrony" ; then
        yum install -y "chrony"
    fi
    /usr/bin/systemctl enable "chronyd"
    /usr/bin/systemctl start "chronyd"
    # The service may not be running because it has been started and failed,
    # so let's reset the state so OVAL checks pass.
    # Service should be 'inactive', not 'failed' after reboot though.
    /usr/bin/systemctl reset-failed "chronyd"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

10.5   [ref]group

Secure audit trails so they cannot

contains 22 rules

10.5.1   [ref]group

Limit viewing of audit trails to

contains 4 rules

System Audit Logs Must Be Owned By Root   [ref]rule

All audit logs must be owned by root user and group. By default, the path for audit log is

/var/log/audit/
. To properly set the owner of /var/log/audit, run the command:
$ sudo chown root /var/log/audit 
To properly set the owner of /var/log/audit/*, run the command:
$ sudo chown root /var/log/audit/* 

Rationale:

Unauthorized disclosure of audit records can reveal system and configuration data to attackers, thus compromising its confidentiality.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -m 1 -q ^log_group /etc/audit/auditd.conf; then
  GROUP=$(awk -F "=" '/log_group/ {print $2}' /etc/audit/auditd.conf | tr -d ' ')
  if ! [ "${GROUP}" == 'root' ] ; then
    chown root.${GROUP} /var/log/audit
    chown root.${GROUP} /var/log/audit/audit.log*
  else
    chown root.root /var/log/audit
    chown root.root /var/log/audit/audit.log*
  fi
else
  chown root.root /var/log/audit
  chown root.root /var/log/audit/audit.log*
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Ensure Log Files Are Owned By Appropriate Group   [ref]rule

The group-owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's group owner:

$ ls -l LOGFILE
If the owner is not root, run the following command to correct this:
$ sudo chgrp root LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

Severity:  medium

Ensure Log Files Are Owned By Appropriate User   [ref]rule

The owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's owner:

$ ls -l LOGFILE
If the owner is not root, run the following command to correct this:
$ sudo chown root LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

Severity:  medium

Ensure System Log Files Have Correct Permissions   [ref]rule

The file permissions for all log files written by rsyslog should be set to 600, or more restrictive. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's permissions:

$ ls -l LOGFILE
If the permissions are not 600 or more restrictive, run the following command to correct this:
$ sudo chmod 0600 LOGFILE
"

Rationale:

Log files can contain valuable information regarding system configuration. If the system log files are not protected unauthorized users could change the logged data, eliminating their forensic value.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
readarray -t RSYSLOG_INCLUDE_CONFIG < <(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2)
readarray -t RSYSLOG_INCLUDE < <(awk '/)/{f=0} /include\(/{f=1} f{nf=gensub("^(include\\(|\\s*)file=\"(\\S+)\".*","\\2",1); if($0!=nf){print nf}}' /etc/rsyslog.conf)

# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}" "${RSYSLOG_INCLUDE[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * Strip quotes and closing brackets from paths.
	# * Ignore paths that match /dev|/etc.*\.conf, as those are paths, but likely not log files
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the following are met:
	# * it contains at least one slash '/' character,
	# * it is preceded by space
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		NORMALIZED_CONFIG_FILE_LINES=$(sed -e "/^[[:space:]|#|$]/d" "${LOG_FILE}")
		LINES_WITH_PATHS=$(grep '[^/]*\s\+\S*/\S\+' <<< "${NORMALIZED_CONFIG_FILE_LINES}")
		FILTERED_PATHS=$(sed -e 's/[^\/]*[[:space:]]*\([^:;[:space:]]*\)/\1/g' <<< "${LINES_WITH_PATHS}")
		CLEANED_PATHS=$(sed -e "s/[\"')]//g; /\\/etc.*\.conf/d; /\\/dev\\//d" <<< "${FILTERED_PATHS}")
		MATCHED_ITEMS=$(sed -e "/^$/d" <<< "${CLEANED_PATHS}")
		# Since above sed command might return more than one item (delimited by newline), split the particular
		# matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS+=("${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi

	# Also for each log file check if its permissions differ from 600. If so, correct them
	if [ -f "$LOG_FILE_PATH" ] && [ "$(/usr/bin/stat -c %a "$LOG_FILE_PATH")" -ne 600 ]
	then
		/bin/chmod 600 "$LOG_FILE_PATH"
	fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

10.5.2   [ref]group

Protect audit trail files from

contains 1 rule

Make the auditd Configuration Immutable   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d in order to make the auditd configuration immutable:

-e 2
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file in order to make the auditd configuration immutable:
-e 2
With this setting, a reboot will be required to change any audit rules.

Rationale:

Making the audit configuration immutable prevents accidental as well as malicious modification of the audit rules, although it may be problematic if legitimate changes are needed during system operation

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Traverse all of:
#
# /etc/audit/audit.rules,			(for auditctl case)
# /etc/audit/rules.d/*.rules			(for augenrules case)
#
# files to check if '-e .*' setting is present in that '*.rules' file already.
# If found, delete such occurrence since auditctl(8) manual page instructs the
# '-e 2' rule should be placed as the last rule in the configuration
find /etc/audit /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -exec sed -i '/-e[[:space:]]\+.*/d' {} ';'

# Append '-e 2' requirement at the end of both:
# * /etc/audit/audit.rules file 		(for auditctl case)
# * /etc/audit/rules.d/immutable.rules		(for augenrules case)

for AUDIT_FILE in "/etc/audit/audit.rules" "/etc/audit/rules.d/immutable.rules"
do
	echo '' >> $AUDIT_FILE
	echo '# Set the audit.rules configuration immutable per security requirements' >> $AUDIT_FILE
	echo '# Reboot is required to change audit rules once this setting is applied' >> $AUDIT_FILE
	echo '-e 2' >> $AUDIT_FILE
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Collect all files from /etc/audit/rules.d with .rules extension
  find:
    paths: /etc/audit/rules.d/
    patterns: '*.rules'
  register: find_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27097-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-171-3.4.3
    - NIST-800-53-AC-6(9)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.2
    - audit_rules_immutable
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Remove the -e option from all Audit config files
  lineinfile:
    path: '{{ item }}'
    regexp: ^\s*(?:-e)\s+.*$
    state: absent
  loop: '{{ find_rules_d.files | map(attribute=''path'') | list + [''/etc/audit/audit.rules'']
    }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27097-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-171-3.4.3
    - NIST-800-53-AC-6(9)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.2
    - audit_rules_immutable
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add Audit -e option into /etc/audit/rules.d/immutable.rules and /etc/audit/audit.rules
  lineinfile:
    path: '{{ item }}'
    create: true
    line: -e 2
  loop:
    - /etc/audit/audit.rules
    - /etc/audit/rules.d/immutable.rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27097-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-171-3.4.3
    - NIST-800-53-AC-6(9)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.2
    - audit_rules_immutable
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy
Remediation script:   (show)

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-e%202%0A
        mode: 0600
        path: /etc/audit/rules.d/90-immutable.rules
        overwrite: true

10.5.3   [ref]group

Promptly back up audit trail files

contains 1 rule

Configure auditd to use audispd's syslog plugin   [ref]rule

To configure the auditd service to use the syslog plug-in of the audispd audit event multiplexor, set the active line in /etc/audisp/plugins.d/syslog.conf to yes. Restart the auditd service:

$ sudo service auditd restart

Rationale:

The auditd service does not include the ability to send audit records to a centralized server for management directly. It does, however, include a plug-in for audit event multiplexor (audispd) to pass audit records to the local syslog server

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_syslog_active="yes"


AUDISP_SYSLOGCONFIG=/etc/audisp/plugins.d/syslog.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDISP_SYSLOGCONFIG '^active' "$var_syslog_active" "CCE-27341-7"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: enable syslog plugin
  lineinfile:
    dest: /etc/audisp/plugins.d/syslog.conf
    regexp: ^active
    line: active = yes
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27341-7
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AU-4(1)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.3
    - auditd_audispd_syslog_plugin_activated
    - configure_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

10.5.4   [ref]group

Write logs for external-facing

10.5.5   [ref]group

Use file-integrity monitoring or

contains 15 rules

Record Events that Modify the System's Mandatory Access Controls   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-w /etc/selinux/ -p wa -k MAC-policy
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-w /etc/selinux/ -p wa -k MAC-policy

Rationale:

The system's mandatory access policy (SELinux) should not be arbitrarily changed by anything other than administrator action. All changes to MAC policy should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/selinux/" "wa" "MAC-policy"
fix_audit_watch_rule "augenrules" "/etc/selinux/" "wa" "MAC-policy"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Check if watch rule for /etc/selinux/ already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/selinux/\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key MAC-policy
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)MAC-policy$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use /etc/audit/rules.d/MAC-policy.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/MAC-policy.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /etc/selinux/ in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/selinux/ -p wa -k MAC-policy
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Check if watch rule for /etc/selinux/ already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/selinux/\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Add watch rule for /etc/selinux/ in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/selinux/ -p wa -k MAC-policy
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27168-4
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.8
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_mac_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---

apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,-w%20/etc/selinux/%20-p%20wa%20-k%20MAC-policy%0A
        mode: 0600
        path: /etc/audit/rules.d/75-etcselinux-wa-MAC-policy.rules
        overwrite: true

Record Events that Modify the System's Network Environment   [ref]rule

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d, setting ARCH to either b32 or b64 as appropriate for your system:

-a always,exit -F arch=ARCH -S sethostname,setdomainname -F key=audit_rules_networkconfig_modification
-w /etc/issue -p wa -k audit_rules_networkconfig_modification
-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
-w /etc/hosts -p wa -k audit_rules_networkconfig_modification
-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file, setting ARCH to either b32 or b64 as appropriate for your system:
-a always,exit -F arch=ARCH -S sethostname,setdomainname -F key=audit_rules_networkconfig_modification
-w /etc/issue -p wa -k audit_rules_networkconfig_modification
-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
-w /etc/hosts -p wa -k audit_rules_networkconfig_modification
-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification

Rationale:

The network environment should not be modified by anything other than administrator action. Any change to network parameters should be audited.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="set\(host\|domain\)name"
	FULL_RULE="-a always,exit -F arch=$ARCH -S sethostname -S setdomainname -k audit_rules_networkconfig_modification"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

# Then perform the remediations for the watch rules
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/issue" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "augenrules" "/etc/issue" "wa" "audit_rules_networkconfig_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/issue.net" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "augenrules" "/etc/issue.net" "wa" "audit_rules_networkconfig_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/hosts" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "augenrules" "/etc/hosts" "wa" "audit_rules_networkconfig_modification"
# Function to fix audit file system object watch rule for given path:
# * if rule exists, also verifies the -w bits match the requirements
# * if rule doesn't exist yet, appends expected rule form to $files_to_inspect
#   audit rules file, depending on the tool which was used to load audit rules
#
# Expects four arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules'
# * path                        	value of -w audit rule's argument
# * required access bits        	value of -p audit rule's argument
# * key                         	value of -k audit rule's argument
#
# Example call:
#
#       fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"
#
function fix_audit_watch_rule {

# Load function arguments into local variables
local tool="$1"
local path="$2"
local required_access_bits="$3"
local key="$4"

# Check sanity of the input
if [ $# -ne "4" ]
then
	echo "Usage: fix_audit_watch_rule 'tool' 'path' 'bits' 'key'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
# Tool used to load audit rules	| Rule already defined	|  Audit rules file to inspect	  |
# -----------------------------------------------------------------------------------------
#	auditctl		|     Doesn't matter	|  /etc/audit/audit.rules	  |
# -----------------------------------------------------------------------------------------
# 	augenrules		|          Yes		|  /etc/audit/rules.d/*.rules	  |
# 	augenrules		|          No		|  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
declare -a files_to_inspect
files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# into the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules')
# If the audit is 'augenrules', then check if rule is already defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to list of files for inspection.
# If rule isn't defined, add '/etc/audit/rules.d/$key.rules' to list of files for inspection.
elif [ "$tool" == 'augenrules' ]
then
	readarray -t matches < <(grep -P "[\s]*-w[\s]+$path" /etc/audit/rules.d/*.rules)

	# For each of the matched entries
	for match in "${matches[@]}"
	do
		# Extract filepath from the match
		rulesd_audit_file=$(echo $match | cut -f1 -d ':')
		# Append that path into list of files for inspection
		files_to_inspect+=("$rulesd_audit_file")
	done
	# Case when particular audit rule isn't defined yet
	if [ "${#files_to_inspect[@]}" -eq "0" ]
	then
		# Append '/etc/audit/rules.d/$key.rules' into list of files for inspection
		local key_rule_file="/etc/audit/rules.d/$key.rules"
		# If the $key.rules file doesn't exist yet, create it with correct permissions
		if [ ! -e "$key_rule_file" ]
		then
			touch "$key_rule_file"
			chmod 0640 "$key_rule_file"
		fi

		files_to_inspect+=("$key_rule_file")
	fi
fi

# Finally perform the inspection and possible subsequent audit rule
# correction for each of the files previously identified for inspection
for audit_rules_file in "${files_to_inspect[@]}"
do

	# Check if audit watch file system object rule for given path already present
	if grep -q -P -- "[\s]*-w[\s]+$path" "$audit_rules_file"
	then
		# Rule is found => verify yet if existing rule definition contains
		# all of the required access type bits

		# Escape slashes in path for use in sed pattern below
		local esc_path=${path//$'/'/$'\/'}
		# Define BRE whitespace class shortcut
		local sp="[[:space:]]"
		# Extract current permission access types (e.g. -p [r|w|x|a] values) from audit rule
		current_access_bits=$(sed -ne "s/$sp*-w$sp\+$esc_path$sp\+-p$sp\+\([rxwa]\{1,4\}\).*/\1/p" "$audit_rules_file")
		# Split required access bits string into characters array
		# (to check bit's presence for one bit at a time)
		for access_bit in $(echo "$required_access_bits" | grep -o .)
		do
			# For each from the required access bits (e.g. 'w', 'a') check
			# if they are already present in current access bits for rule.
			# If not, append that bit at the end
			if ! grep -q "$access_bit" <<< "$current_access_bits"
			then
				# Concatenate the existing mask with the missing bit
				current_access_bits="$current_access_bits$access_bit"
			fi
		done
		# Propagate the updated rule's access bits (original + the required
		# ones) back into the /etc/audit/audit.rules file for that rule
		sed -i "s/\($sp*-w$sp\+$esc_path$sp\+-p$sp\+\)\([rxwa]\{1,4\}\)\(.*\)/\1$current_access_bits\3/" "$audit_rules_file"
	else
		# Rule isn't present yet. Append it at the end of $audit_rules_file file
		# with proper key

		echo "-w $path -p $required_access_bits -k $key" >> "$audit_rules_file"
	fi
done
}
fix_audit_watch_rule "auditctl" "/etc/sysconfig/network" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "augenrules" "/etc/sysconfig/network" "wa" "audit_rules_networkconfig_modification"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Remediate audit rules for network configuration for x86
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - sethostname
          - setdomainname

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_rules_networkconfig_modification
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_rules_networkconfig_modification$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_rules_networkconfig_modification.rules as
        the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_rules_networkconfig_modification.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_rules_networkconfig_modification'
            }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - sethostname
          - setdomainname

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_rules_networkconfig_modification'
            }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Remediate audit rules for network configuration for x86_64
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - sethostname
          - setdomainname

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b64_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b64_rules_d="{{ audit_syscalls_found_b64_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key audit_rules_networkconfig_modification
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)audit_rules_networkconfig_modification$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/audit_rules_networkconfig_modification.rules as
        the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/audit_rules_networkconfig_modification.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_rules_networkconfig_modification'
            }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - sethostname
          - setdomainname

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b64_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b64_audit_rules="{{ audit_syscalls_found_b64_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k audit_rules_networkconfig_modification'
            }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_audit_rules < audit_syscalls_number_of_syscalls
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch == "b64"
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/issue already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/issue\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_networkconfig_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_networkconfig_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_networkconfig_modification.rules as the
    recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/audit_rules_networkconfig_modification.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/issue in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/issue -p wa -k audit_rules_networkconfig_modification
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/issue already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/issue\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/issue in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/issue -p wa -k audit_rules_networkconfig_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/issue.net already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/issue.net\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_networkconfig_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_networkconfig_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_networkconfig_modification.rules as the
    recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/audit_rules_networkconfig_modification.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/issue.net in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/issue.net already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/issue.net\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/issue.net in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/hosts already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/hosts\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_networkconfig_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_networkconfig_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_networkconfig_modification.rules as the
    recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/audit_rules_networkconfig_modification.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/hosts in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/hosts -p wa -k audit_rules_networkconfig_modification
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/hosts already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/hosts\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/hosts in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/hosts -p wa -k audit_rules_networkconfig_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/sysconfig/network already exists in /etc/audit/rules.d/
  find:
    paths: /etc/audit/rules.d
    contains: ^\s*-w\s+/etc/sysconfig/network\s+-p\s+wa(\s|$)+
    patterns: '*.rules'
  register: find_existing_watch_rules_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for other rules with specified key audit_rules_networkconfig_modification
  find:
    paths: /etc/audit/rules.d
    contains: ^.*(?:-F key=|-k\s+)audit_rules_networkconfig_modification$
    patterns: '*.rules'
  register: find_watch_key
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/audit_rules_networkconfig_modification.rules as the
    recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/audit_rules_networkconfig_modification.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched == 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_watch_key.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_watch_key.matched is defined and find_watch_key.matched > 0 and find_existing_watch_rules_d.matched
      is defined and find_existing_watch_rules_d.matched == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/sysconfig/network in /etc/audit/rules.d/
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_rules_d.matched is defined and find_existing_watch_rules_d.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check if watch rule for /etc/sysconfig/network already exists in /etc/audit/audit.rules
  find:
    paths: /etc/audit/
    contains: ^\s*-w\s+/etc/sysconfig/network\s+-p\s+wa(\s|$)+
    patterns: audit.rules
  register: find_existing_watch_audit_rules
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add watch rule for /etc/sysconfig/network in /etc/audit/audit.rules
  lineinfile:
    line: -w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification
    state: present
    dest: /etc/audit/audit.rules
    create: true
    mode: '0640'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_existing_watch_audit_rules.matched is defined and find_existing_watch_audit_rules.matched
      == 0
  tags:
    - CCE-27076-9
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_networkconfig_modification
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - chmod   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S chmod.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit chmod tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_chmod
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chmod.matched is defined and find_chmod.matched == 0
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_chmod.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chmod.matched is defined and find_chmod.matched > 0
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27339-1
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030410
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - chown   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S chown.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit chown tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_chown
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chown.matched is defined and find_chown.matched == 0
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_chown.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chown.matched is defined and find_chown.matched > 0
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27364-9
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030370
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - fchmod   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S fchmod.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit fchmod tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_fchmod
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchmod.matched is defined and find_fchmod.matched == 0
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_fchmod.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchmod.matched is defined and find_fchmod.matched > 0
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmod rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmod rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmod rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmod rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S fchmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27393-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030420
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - fchmodat   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S fchmodat.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit fchmodat tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_fchmodat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchmodat.matched is defined and find_fchmodat.matched == 0
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_fchmodat.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchmodat.matched is defined and find_fchmodat.matched > 0
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmodat rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmodat rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmodat rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchmodat rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27388-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030430
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchmodat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - fchown   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S fchown.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit fchown tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_fchown
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchown.matched is defined and find_fchown.matched == 0
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_fchown.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchown.matched is defined and find_fchown.matched > 0
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchown rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchown rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchown rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchown rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S fchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27356-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030380
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - fchownat   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S fchownat.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit fchownat tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_fchownat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchownat.matched is defined and find_fchownat.matched == 0
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_fchownat.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fchownat.matched is defined and find_fchownat.matched > 0
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchownat rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchownat rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchownat rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fchownat rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S fchownat -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27387-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030400
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fchownat
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - fremovexattr   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root.

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S fremovexattr.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit fremovexattr tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_fremovexattr
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fremovexattr.matched is defined and find_fremovexattr.matched == 0
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_fremovexattr.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fremovexattr.matched is defined and find_fremovexattr.matched > 0
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fremovexattr rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S fremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fremovexattr rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S fremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fremovexattr rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S fremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fremovexattr rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S fremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27353-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030480
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - fsetxattr   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S fsetxattr.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S fsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit fsetxattr tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_fsetxattr
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fsetxattr.matched is defined and find_fsetxattr.matched == 0
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_fsetxattr.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_fsetxattr.matched is defined and find_fsetxattr.matched > 0
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fsetxattr rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S fsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fsetxattr rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S fsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fsetxattr rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S fsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the fsetxattr rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S fsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27389-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030450
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_fsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - lchown   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S lchown.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit lchown tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_lchown
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_lchown.matched is defined and find_lchown.matched == 0
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_lchown.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_lchown.matched is defined and find_lchown.matched > 0
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lchown rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lchown rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lchown rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lchown rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27083-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030390
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lchown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - lremovexattr   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root.

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S lremovexattr.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S lremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit lremovexattr tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_lremovexattr
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_lremovexattr.matched is defined and find_lremovexattr.matched == 0
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_lremovexattr.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_lremovexattr.matched is defined and find_lremovexattr.matched > 0
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lremovexattr rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S lremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lremovexattr rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S lremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lremovexattr rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S lremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lremovexattr rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S lremovexattr -F auid>=1000 -F auid!=unset
      -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27410-0
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030490
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lremovexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - lsetxattr   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S lsetxattr.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S lsetxattr -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit lsetxattr tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_lsetxattr
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_lsetxattr.matched is defined and find_lsetxattr.matched == 0
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_lsetxattr.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_lsetxattr.matched is defined and find_lsetxattr.matched > 0
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lsetxattr rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S lsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lsetxattr rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S lsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lsetxattr rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S lsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the lsetxattr rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S lsetxattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27280-7
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030460
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_lsetxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - removexattr   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root.

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod


If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S removexattr.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S removexattr -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit removexattr tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_removexattr
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_removexattr.matched is defined and find_removexattr.matched == 0
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_removexattr.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_removexattr.matched is defined and find_removexattr.matched > 0
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the removexattr rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S removexattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the removexattr rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S removexattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the removexattr rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S removexattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the removexattr rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S removexattr -F auid>=1000 -F auid!=unset -F
      key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27367-2
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030470
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_removexattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Record Events that Modify the System's Discretionary Access Controls - setxattr   [ref]rule

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:

-a always,exit -F arch=b32 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S setxattr.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit setxattr tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_setxattr
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_setxattr.matched is defined and find_setxattr.matched == 0
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_setxattr.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_setxattr.matched is defined and find_setxattr.matched > 0
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the setxattr rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the setxattr rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the setxattr rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the setxattr rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S setxattr -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-27213-8
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030440
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_setxattr
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

System Audit Logs Must Have Mode 0640 or Less Permissive   [ref]rule

If log_group in /etc/audit/auditd.conf is set to a group other than the root group account, change the mode of the audit log files with the following command:

$ sudo chmod 0640 audit_file

Otherwise, change the mode of the audit log files with the following command:
$ sudo chmod 0600 audit_file

Rationale:

If users can write to audit logs, audit trails can be modified or destroyed.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -m 1 -q ^log_group /etc/audit/auditd.conf; then
  GROUP=$(awk -F "=" '/log_group/ {print $2}' /etc/audit/auditd.conf | tr -d ' ')
  if ! [ "${GROUP}" == 'root' ] ; then
    chmod 0640 /var/log/audit/audit.log
    chmod 0440 /var/log/audit/audit.log.*
  else
    chmod 0600 /var/log/audit/audit.log
    chmod 0400 /var/log/audit/audit.log.*
  fi
else
  chmod 0600 /var/log/audit/audit.log
  chmod 0400 /var/log/audit/audit.log.*
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

10.6   [ref]group

Review logs and security events for

10.6.1   [ref]group

Review the following at least

10.6.1.a   [ref]group

Examine security policies and procedures to verify that

10.6.1.b   [ref]group

Observe processes and interview personnel to verify

10.6.2   [ref]group

Review logs of all other system

10.6.2.a   [ref]group

Examine security policies and procedures to verify that

10.6.2.b   [ref]group

10.6.3   [ref]group

Follow up exceptions and

10.6.3.a   [ref]group

Examine security policies and procedures to verify that

10.6.3.b   [ref]group

Observe processes and interview personnel to verify

10.7   [ref]group

Retain audit trail history for at least

contains 7 rules

10.7.a   [ref]group

Examine security policies and procedures to verify that they

contains 1 rule

Configure auditd mail_acct Action on Low Disk Space   [ref]rule

The auditd service can be configured to send email to a designated account in certain situations. Add or correct the following line in /etc/audit/auditd.conf to ensure that administrators are notified via email for those situations:

action_mail_acct = root

Rationale:

Email sent to the root account is typically aliased to the administrators of the system, who can take appropriate action.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_auditd_action_mail_acct="root"



AUDITCONFIG=/etc/audit/auditd.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDITCONFIG '^action_mail_acct' "$var_auditd_action_mail_acct" "CCE-27394-6"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_auditd_action_mail_acct # promote to variable
  set_fact:
    var_auditd_action_mail_acct: !!str root
  tags:
    - always

- name: Configure auditd mail_acct Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: action_mail_acct = {{ var_auditd_action_mail_acct }}
    state: present
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27394-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030350
    - NIST-800-171-3.3.1
    - NIST-800-53-AU-5(2)
    - NIST-800-53-AU-5(a)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)
    - PCI-DSS-Req-10.7.a
    - auditd_data_retention_action_mail_acct
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

10.7.b   [ref]group

Interview personnel and examine audit logs to verify that

10.7.c   [ref]group

Interview personnel and observe processes to verify that at

Configure auditd admin_space_left Action on Low Disk Space   [ref]rule

The auditd service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting ACTION appropriately:

admin_space_left_action = ACTION
Set this value to single to cause the system to switch to single user mode for corrective action. Acceptable values also include suspend and halt. For certain systems, the need for availability outweighs the need to log all actions, and a different setting should be determined. Details regarding all possible values for ACTION are described in the auditd.conf man page.

Rationale:

Administrators should be made aware of an inability to record audit records. If a separate partition or logical volume of adequate size is used, running low on space for audit records should never occur.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_auditd_admin_space_left_action="single"



AUDITCONFIG=/etc/audit/auditd.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDITCONFIG '^admin_space_left_action' "$var_auditd_admin_space_left_action" "CCE-27370-6"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_auditd_admin_space_left_action # promote to variable
  set_fact:
    var_auditd_admin_space_left_action: !!str single
  tags:
    - always

- name: Configure auditd admin_space_left Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: admin_space_left_action = {{ var_auditd_admin_space_left_action }}
    regexp: ^\s*admin_space_left_action\s*=\s*.*$
    state: present
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27370-6
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030340
    - NIST-800-171-3.3.1
    - NIST-800-53-AU-5(1)
    - NIST-800-53-AU-5(2)
    - NIST-800-53-AU-5(4)
    - NIST-800-53-AU-5(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - auditd_data_retention_admin_space_left_action
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20incremental_async%0Afreq%20%3D%2050%0Amax_log_file%20%3D%208%0Anum_logs%20%3D%205%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20rotate%0Aspace_left%20%3D%20100%0Aspace_left_action%20%3D%20syslog%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20root%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20syslog%0Adisk_error_action%20%3D%20syslog%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true

Configure auditd Max Log File Size   [ref]rule

Determine the amount of audit data (in megabytes) which should be retained in each log file. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting the correct value of 6 for STOREMB:

max_log_file = STOREMB
Set the value to 6 (MB) or higher for general-purpose systems. Larger values, of course, support retention of even more audit data.

Rationale:

The total storage for audit log files must be large enough to retain log information over the period required. This is a function of the maximum log file size and the number of logs retained.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_auditd_max_log_file="6"



AUDITCONFIG=/etc/audit/auditd.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDITCONFIG '^max_log_file' "$var_auditd_max_log_file" "CCE-27319-3"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_auditd_max_log_file # promote to variable
  set_fact:
    var_auditd_max_log_file: !!str 6
  tags:
    - always

- name: Configure auditd Max Log File Size
  lineinfile:
    dest: /etc/audit/auditd.conf
    regexp: ^\s*max_log_file\s*=\s*.*$
    line: max_log_file = {{ var_auditd_max_log_file }}
    state: present
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27319-3
    - CJIS-5.4.1.1
    - NIST-800-53-AU-11
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - auditd_data_retention_max_log_file
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20incremental_async%0Afreq%20%3D%2050%0Amax_log_file%20%3D%208%0Anum_logs%20%3D%205%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20rotate%0Aspace_left%20%3D%20100%0Aspace_left_action%20%3D%20syslog%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20root%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20syslog%0Adisk_error_action%20%3D%20syslog%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true

Configure auditd max_log_file_action Upon Reaching Maximum Log Size   [ref]rule

The default action to take when the logs reach their maximum size is to rotate the log files, discarding the oldest one. To configure the action taken by auditd, add or correct the line in /etc/audit/auditd.conf:

max_log_file_action = ACTION
Possible values for ACTION are described in the auditd.conf man page. These include:
  • syslog
  • suspend
  • rotate
  • keep_logs
Set the ACTION to rotate to ensure log rotation occurs. This is the default. The setting is case-insensitive.

Rationale:

Automatically rotating logs (by setting this to rotate) minimizes the chances of the system unexpectedly running out of disk space by being overwhelmed with log data. However, for systems that must never discard log data, or which use external processes to transfer it and reclaim space, keep_logs can be employed.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_auditd_max_log_file_action="rotate"



AUDITCONFIG=/etc/audit/auditd.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDITCONFIG '^max_log_file_action' "$var_auditd_max_log_file_action" "CCE-27231-0"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_auditd_max_log_file_action # promote to variable
  set_fact:
    var_auditd_max_log_file_action: !!str rotate
  tags:
    - always

- name: Configure auditd max_log_file_action Upon Reaching Maximum Log Size
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: max_log_file_action = {{ var_auditd_max_log_file_action }}
    regexp: ^\s*max_log_file_action\s*=\s*.*$
    state: present
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27231-0
    - CJIS-5.4.1.1
    - NIST-800-53-AU-5(1)
    - NIST-800-53-AU-5(2)
    - NIST-800-53-AU-5(4)
    - NIST-800-53-AU-5(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - auditd_data_retention_max_log_file_action
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20incremental_async%0Afreq%20%3D%2050%0Amax_log_file%20%3D%208%0Anum_logs%20%3D%205%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20rotate%0Aspace_left%20%3D%20100%0Aspace_left_action%20%3D%20syslog%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20root%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20syslog%0Adisk_error_action%20%3D%20syslog%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true

Configure auditd Number of Logs Retained   [ref]rule

Determine how many log files auditd should retain when it rotates logs. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting NUMLOGS with the correct value of 5:

num_logs = NUMLOGS
Set the value to 5 for general-purpose systems. Note that values less than 2 result in no log rotation.

Rationale:

The total storage for audit log files must be large enough to retain log information over the period required. This is a function of the maximum log file size and the number of logs retained.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_auditd_num_logs="5"



AUDITCONFIG=/etc/audit/auditd.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDITCONFIG '^num_logs' "$var_auditd_num_logs" "CCE-27348-2"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_auditd_num_logs # promote to variable
  set_fact:
    var_auditd_num_logs: !!str 5
  tags:
    - always

- name: Configure auditd Number of Logs Retained
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: num_logs = {{ var_auditd_num_logs }}
    regexp: ^\s*num_logs\s*=\s*.*$
    state: present
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27348-2
    - CJIS-5.4.1.1
    - NIST-800-171-3.3.1
    - NIST-800-53-AU-11
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - auditd_data_retention_num_logs
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20incremental_async%0Afreq%20%3D%2050%0Amax_log_file%20%3D%208%0Anum_logs%20%3D%205%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20rotate%0Aspace_left%20%3D%20100%0Aspace_left_action%20%3D%20syslog%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20root%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20syslog%0Adisk_error_action%20%3D%20syslog%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true

Configure auditd space_left Action on Low Disk Space   [ref]rule

The auditd service can be configured to take an action when disk space starts to run low. Edit the file /etc/audit/auditd.conf. Modify the following line, substituting ACTION appropriately:

space_left_action = ACTION
Possible values for ACTION are described in the auditd.conf man page. These include:
  • syslog
  • email
  • exec
  • suspend
  • single
  • halt
Set this to email (instead of the default, which is suspend) as it is more likely to get prompt attention. Acceptable values also include suspend, single, and halt.

Rationale:

Notifying administrators of an impending disk space problem may allow them to take corrective action prior to any disruption.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then


var_auditd_space_left_action="email"



#
# If space_left_action present in /etc/audit/auditd.conf, change value
# to var_auditd_space_left_action, else
# add "space_left_action = $var_auditd_space_left_action" to /etc/audit/auditd.conf
#

AUDITCONFIG=/etc/audit/auditd.conf
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append $AUDITCONFIG '^space_left_action' "$var_auditd_space_left_action" "CCE-27375-5"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_auditd_space_left_action # promote to variable
  set_fact:
    var_auditd_space_left_action: !!str email
  tags:
    - always

- name: Configure auditd space_left Action on Low Disk Space
  lineinfile:
    dest: /etc/audit/auditd.conf
    line: space_left_action = {{ var_auditd_space_left_action }}
    regexp: ^\s*space_left_action\s*=\s*.*$
    state: present
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27375-5
    - CJIS-5.4.1.1
    - DISA-STIG-RHEL-07-030340
    - NIST-800-171-3.3.1
    - NIST-800-53-AU-5(1)
    - NIST-800-53-AU-5(2)
    - NIST-800-53-AU-5(4)
    - NIST-800-53-AU-5(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - auditd_data_retention_space_left_action
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%0A%23%20This%20file%20controls%20the%20configuration%20of%20the%20audit%20daemon%0A%23%0A%0Alocal_events%20%3D%20yes%0Awrite_logs%20%3D%20yes%0Alog_file%20%3D%20/var/log/audit/audit.log%0Alog_group%20%3D%20root%0Alog_format%20%3D%20ENRICHED%0Aflush%20%3D%20incremental_async%0Afreq%20%3D%2050%0Amax_log_file%20%3D%208%0Anum_logs%20%3D%205%0Apriority_boost%20%3D%204%0Aname_format%20%3D%20hostname%0A%23%23name%20%3D%20mydomain%0Amax_log_file_action%20%3D%20rotate%0Aspace_left%20%3D%20100%0Aspace_left_action%20%3D%20syslog%0Averify_email%20%3D%20yes%0Aaction_mail_acct%20%3D%20root%0Aadmin_space_left%20%3D%2050%0Aadmin_space_left_action%20%3D%20syslog%0Adisk_full_action%20%3D%20syslog%0Adisk_error_action%20%3D%20syslog%0Ause_libwrap%20%3D%20yes%0A%23%23tcp_listen_port%20%3D%2060%0Atcp_listen_queue%20%3D%205%0Atcp_max_per_addr%20%3D%201%0A%23%23tcp_client_ports%20%3D%201024-65535%0Atcp_client_max_idle%20%3D%200%0Atransport%20%3D%20TCP%0Akrb5_principal%20%3D%20auditd%0A%23%23krb5_key_file%20%3D%20/etc/audit/audit.key%0Adistribute_network%20%3D%20no%0Aq_depth%20%3D%20400%0Aoverflow_action%20%3D%20syslog%0Amax_restarts%20%3D%2010%0Aplugin_dir%20%3D%20/etc/audit/plugins.d
        mode: 0640
        path: /etc/audit/auditd.conf
        overwrite: true

Ensure Logrotate Runs Periodically   [ref]rule

The logrotate utility allows for the automatic rotation of log files. The frequency of rotation is specified in /etc/logrotate.conf, which triggers a cron task. To configure logrotate to run daily, add or correct the following line in /etc/logrotate.conf:

# rotate log files frequency
daily

Rationale:

Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

LOGROTATE_CONF_FILE="/etc/logrotate.conf"
CRON_DAILY_LOGROTATE_FILE="/etc/cron.daily/logrotate"

# daily rotation is configured
grep -q "^daily$" $LOGROTATE_CONF_FILE|| echo "daily" >> $LOGROTATE_CONF_FILE

# remove any line configuring weekly, monthly or yearly rotation
sed -i '/^\s*\(weekly\|monthly\|yearly\).*$/d' $LOGROTATE_CONF_FILE

# configure cron.daily if not already
if ! grep -q "^[[:space:]]*/usr/sbin/logrotate[[:alnum:][:blank:][:punct:]]*$LOGROTATE_CONF_FILE$" $CRON_DAILY_LOGROTATE_FILE; then
	echo "#!/bin/sh" > $CRON_DAILY_LOGROTATE_FILE
	echo "/usr/sbin/logrotate $LOGROTATE_CONF_FILE" >> $CRON_DAILY_LOGROTATE_FILE
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Configure daily log rotation in /etc/logrotate.conf
  lineinfile:
    create: true
    dest: /etc/logrotate.conf
    regexp: ^daily$
    line: daily
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80195-1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - configure_strategy
    - ensure_logrotate_activated
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Make sure daily log rotation setting is not overriden in /etc/logrotate.conf
  lineinfile:
    create: false
    dest: /etc/logrotate.conf
    regexp: ^[\s]*(weekly|monthly|yearly)$
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80195-1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - configure_strategy
    - ensure_logrotate_activated
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed

- name: Configure cron.daily if not already
  block:

    - name: Add shebang
      lineinfile:
        path: /etc/cron.daily/logrotate
        line: '#!/bin/sh'
        insertbefore: BOF
        create: true

    - name: Add logrotate call
      lineinfile:
        path: /etc/cron.daily/logrotate
        line: /usr/sbin/logrotate /etc/logrotate.conf
        regexp: ^[\s]*/usr/sbin/logrotate[\s\S]*/etc/logrotate.conf$
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-80195-1
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.7
    - configure_strategy
    - ensure_logrotate_activated
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
Remediation script:   (show)

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20see%20%22man%20logrotate%22%20for%20details%0A%23%20rotate%20log%20files%20daily%0Adaily%0A%0A%23%20keep%204%20weeks%20worth%20of%20backlogs%0Arotate%2030%0A%0A%23%20create%20new%20%28empty%29%20log%20files%20after%20rotating%20old%20ones%0Acreate%0A%0A%23%20use%20date%20as%20a%20suffix%20of%20the%20rotated%20file%0Adateext%0A%0A%23%20uncomment%20this%20if%20you%20want%20your%20log%20files%20compressed%0A%23compress%0A%0A%23%20RPM%20packages%20drop%20log%20rotation%20information%20into%20this%20directory%0Ainclude%20/etc/logrotate.d%0A%0A%23%20system-specific%20logs%20may%20be%20also%20be%20configured%20here.
        mode: 0644
        path: /etc/logrotate.conf
        overwrite: true

10.8   [ref]group

Ensure that security policies and

11.   [ref]group

Regularly test security systems and processes

contains 7 rules

11.1   [ref]group

Implement processes to test for the

11.1.1   [ref]group

Maintain an inventory of

11.1.2   [ref]group

Implement incident response

11.1.2.a   [ref]group

11.1.2.b   [ref]group

Interview responsible personnel and/or inspect

11.1.a   [ref]group

Examine policies and procedures to verify processes

11.1.b   [ref]group

Verify that the methodology is adequate to detect and

11.1.c   [ref]group

If wireless scanning is utilized, examine output from

11.1.d   [ref]group

If automated monitoring is utilized (for example,

11.2   [ref]group

Run internal and external network

11.2.1   [ref]group

Perform quarterly internal

11.2.1.a   [ref]group

Review the scan reports and verify that four

11.2.1.b   [ref]group

Review the scan reports and verify that the scan

11.2.2   [ref]group

Perform quarterly external

11.2.2.c   [ref]group

Review the scan reports to verify that the scans

11.2.3   [ref]group

Perform internal and external

11.2.3.a   [ref]group

Inspect and correlate change control

11.2.3.b   [ref]group

Review scan reports and verify that the scan

11.2.3.c   [ref]group

Validate that the scan was performed by a qualified

11.3   [ref]group

Implement a methodology for

11.3.1   [ref]group

Perform

11.3.1.a   [ref]group

Examine the scope of work and results from the

11.3.1.b   [ref]group

Verify that the test was performed by a qualified

11.3.2   [ref]group

Perform

11.3.2.a   [ref]group

Examine the scope of work and results from the

11.3.2.b   [ref]group

Verify that the test was performed by a qualified

11.3.3   [ref]group

Exploitable vulnerabilities found

11.3.4   [ref]group

If segmentation is used to isolate

11.3.4.a   [ref]group

Examine segmentation controls and review

11.3.4.b   [ref]group

Examine the results from the most recent

11.4   [ref]group

Use intrusion-detection and/or

contains 1 rule

11.4.a   [ref]group

Examine system configurations and network diagrams

11.4.b   [ref]group

Examine system configurations and interview

11.4.c   [ref]group

Examine IDS/IPS configurations and vendor

Install Intrusion Detection Software   [ref]rule

The base Red Hat Enterprise Linux 7 platform already includes a sophisticated auditing system that can detect intruder activity, as well as SELinux, which provides host-based intrusion prevention capabilities by confining privileged programs and user sessions which may become compromised.

Warning:  In DoD environments, supplemental intrusion detection and antivirus tools, such as the McAfee Host-based Security System, are available to integrate with existing infrastructure. Per DISA guidance, when these supplemental tools interfere with proper functioning of SELinux, SELinux takes precedence. Should further clarification be required, DISA contact information is published publicly at https://public.cyber.mil/stigs/
Rationale:

Host-based intrusion detection tools provide a system-level defense when an intruder gains access to a system or network.

Severity:  high

11.5   [ref]group

Deploy a change-detection

contains 6 rules

11.5.1   [ref]group

Implement a process to respond to

11.5.a   [ref]group

Verify the use of a change-detection mechanism within

11.5.b   [ref]group

Verify the mechanism is configured to alert personnel

Verify File Hashes with RPM   [ref]rule

Without cryptographic integrity protections, system executables and files can be altered by unauthorized users without detection. The RPM package management system can check the hashes of installed software packages, including many that are important to system security. To verify that the cryptographic hash of system files and commands matches vendor values, run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:

$ rpm -Va --noconfig | grep '^..5'
A "c" in the second column indicates that a file is a configuration file, which may appropriately be expected to change. If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAME
The package can be reinstalled from a yum repository using the command:
$ sudo yum reinstall PACKAGENAME
Alternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME

Rationale:

The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.

Severity:  high

Remediation Shell script:   (show)


# Find which files have incorrect hash (not in /etc, because of the system related config files) and then get files names
files_with_incorrect_hash="$(rpm -Va --noconfig | grep -E '^..5' | awk '{print $NF}' )"

# From files names get package names and change newline to space, because rpm writes each package to new line
packages_to_reinstall="$(rpm -qf $files_with_incorrect_hash | tr '\n' ' ')"

yum reinstall -y $packages_to_reinstall
Remediation Ansible snippet:   (show)

Complexity:high
Disruption:medium
Strategy:restrict
- name: 'Set fact: Package manager reinstall command (dnf)'
  set_fact:
    package_manager_reinstall_cmd: dnf reinstall -y
  when: ansible_distribution == "Fedora"
  tags:
    - CCE-27157-7
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010020
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_hashes

- name: 'Set fact: Package manager reinstall command (yum)'
  set_fact:
    package_manager_reinstall_cmd: yum reinstall -y
  when: (ansible_distribution == "RedHat" or ansible_distribution == "OracleLinux")
  tags:
    - CCE-27157-7
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010020
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_hashes

- name: Read files with incorrect hash
  command: rpm -Va --nodeps --nosize --nomtime --nordev --nocaps --nolinkto --nouser
    --nogroup --nomode --noghost --noconfig
  args:
    warn: false
  register: files_with_incorrect_hash
  changed_when: false
  failed_when: files_with_incorrect_hash.rc > 1
  check_mode: false
  when: (package_manager_reinstall_cmd is defined)
  tags:
    - CCE-27157-7
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010020
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_hashes

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  args:
    warn: false
  with_items: '{{ files_with_incorrect_hash.stdout_lines | map(''regex_findall'',
    ''^[.]+[5]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when:
    - files_with_incorrect_hash.stdout_lines is defined
    - (files_with_incorrect_hash.stdout_lines | length > 0)
  tags:
    - CCE-27157-7
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010020
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_hashes

- name: Reinstall packages of files with incorrect hash
  command: '{{ package_manager_reinstall_cmd }} ''{{ item }}'''
  args:
    warn: false
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when:
    - files_with_incorrect_hash.stdout_lines is defined
    - (package_manager_reinstall_cmd is defined and (files_with_incorrect_hash.stdout_lines
      | length > 0))
  tags:
    - CCE-27157-7
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010020
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_hashes

Verify and Correct File Permissions with RPM   [ref]rule

The RPM package management system can check file access permissions of installed software packages, including many that are important to system security. Verify that the file permissions of system files and commands match vendor values. Check the file permissions with the following command:

$ sudo rpm -Va | awk '{ if (substr($0,2,1)=="M") print $NF }'
Output indicates files that do not match vendor defaults. After locating a file with incorrect permissions, run the following command to determine which package owns it:
$ rpm -qf FILENAME

Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setperms PACKAGENAME

Warning:  Profiles may require that specific files have stricter file permissions than defined by the vendor. Such files will be reported as a finding and need to be evaluated according to your policy and deployment environment.
Rationale:

Permissions on system binaries and configuration files that are too generous could allow an unauthorized user to gain privileges that they should not have. The permissions set by the vendor should be maintained. Any deviations from this baseline should be investigated.

Severity:  high

Remediation Shell script:   (show)

Complexity:high
Disruption:medium
Strategy:restrict

# Declare array to hold set of RPM packages we need to correct permissions for
declare -A SETPERMS_RPM_DICT

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
readarray -t FILES_WITH_INCORRECT_PERMS < <(rpm -Va --nofiledigest | awk '{ if (substr($0,2,1)=="M") print $NF }')

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
        # NOTE: some files maybe controlled by more then one package
        readarray -t RPM_PACKAGES < <(rpm -qf "${FILE_PATH}")
        for RPM_PACKAGE in "${RPM_PACKAGES[@]}"
        do
                # Use an associative array to store packages as it's keys, not having to care about duplicates.
                SETPERMS_RPM_DICT["$RPM_PACKAGE"]=1
        done
done

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${!SETPERMS_RPM_DICT[@]}"
do
	rpm --restore "${RPM_PACKAGE}"
done
Remediation Ansible snippet:   (show)

Complexity:high
Disruption:medium
Strategy:restrict
- name: Read list of files with incorrect permissions
  command: rpm -Va --nodeps --nosignature --nofiledigest --nosize --nomtime --nordev
    --nocaps --nolinkto --nouser --nogroup
  args:
    warn: false
  register: files_with_incorrect_permissions
  failed_when: files_with_incorrect_permissions.rc > 1
  changed_when: false
  check_mode: false
  tags:
    - CCE-27209-6
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010010
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_permissions

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  args:
    warn: false
  with_items: '{{ files_with_incorrect_permissions.stdout_lines | map(''regex_findall'',
    ''^[.]+[M]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when: (files_with_incorrect_permissions.stdout_lines | length > 0)
  tags:
    - CCE-27209-6
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010010
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_permissions

- name: Correct file permissions with RPM
  command: rpm --setperms '{{ item }}'
  args:
    warn: false
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when: (files_with_incorrect_permissions.stdout_lines | length > 0)
  tags:
    - CCE-27209-6
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-07-010010
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_permissions

Install AIDE   [ref]rule

The aide package can be installed with the following command:

$ sudo yum install aide

Rationale:

The AIDE package must be installed if it is to be available for integrity checking.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27096-7
    - CJIS-5.10.1.3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-11.5
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_aide_installed
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable

package --add=aide
Remediation script:   (show)


[[packages]]
name = "aide"
version = "*"

Build and Test AIDE Database   [ref]rule

Run the following command to generate a new database:

$ sudo /usr/sbin/aide --init
By default, the database will be written to the file /var/lib/aide/aide.db.new.gz. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/sbin/aide (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:
$ sudo cp /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz
To initiate a manual check, run the following command:
$ sudo /usr/sbin/aide --check
If this check produces any unexpected output, investigate.

Rationale:

For AIDE to be effective, an initial database of "known-good" information about files must be captured and it should be able to be verified against the installed files.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

/usr/sbin/aide --init
/bin/cp -p /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
    - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27220-3
    - CJIS-5.10.1.3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-11.5
    - aide_build_database
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Build and Test AIDE Database
  command: /usr/sbin/aide --init
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27220-3
    - CJIS-5.10.1.3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-11.5
    - aide_build_database
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Check whether the stock AIDE Database exists
  stat:
    path: /var/lib/aide/aide.db.new.gz
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-27220-3
    - CJIS-5.10.1.3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-11.5
    - aide_build_database
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Stage AIDE Database
  copy:
    src: /var/lib/aide/aide.db.new.gz
    dest: /var/lib/aide/aide.db.gz
    backup: true
    remote_src: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
    - CCE-27220-3
    - CJIS-5.10.1.3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-11.5
    - aide_build_database
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Configure Periodic Execution of AIDE   [ref]rule

At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:

05 4 * * * root /usr/sbin/aide --check
To implement a weekly execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * 0 root /usr/sbin/aide --check
AIDE can be executed periodically through other means; this is merely one example. The usage of cron's special time codes, such as @daily and @weekly is acceptable.

Rationale:

By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.

Severity:  medium

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    yum install -y "aide"
fi

if ! grep -q "/usr/sbin/aide --check" /etc/crontab ; then
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
else
    sed -i '/^.*\/usr\/sbin\/aide --check.*$/d' /etc/crontab
    echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
    - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-26952-2
    - CJIS-5.10.1.3
    - DISA-STIG-RHEL-07-020030
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - PCI-DSS-Req-11.5
    - aide_periodic_cron_checking
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure Periodic Execution of AIDE
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/sbin/aide --check
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-26952-2
    - CJIS-5.10.1.3
    - DISA-STIG-RHEL-07-020030
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - PCI-DSS-Req-11.5
    - aide_periodic_cron_checking
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

11.6   [ref]group

Ensure that security policies and

Values   [ref]group

Group of values used in PCI-DSS profile

Non PCI-DSS   [ref]group

Rules that are not part of PCI-DSS

contains 1 rule

Make sure that the dconf databases are up-to-date with regards to respective keyfiles   [ref]rule

By default, DConf uses a binary database as a data backend. The system-level database is compiled from keyfiles in the /etc/dconf/db/ directory by the

dconf update
command.

Rationale:

Unlike text-based keyfiles, the binary database is impossible to check by OVAL. Therefore, in order to evaluate dconf configuration, both have to be true at the same time - configuration files have to be compliant, and the database needs to be more recent than those keyfiles, which gives confidence that it reflects them.

Severity:  high

Identifiers:  CCE-81004-4

References:  1.7.2, 164.308(a)(1)(ii)(B), 164.308(a)(5)(ii)(A), SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if rpm --quiet -q gdm && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.