************************ VERSION 1.10.3.5 *****************************
./README: 1.52 99/11/11 13:40:33 by baud 
1.10.3.5 release

common/Imakefile: 1.29 99/11/11 13:26:18 by baud 
move service.obj from common to rfio subdirectory

h/sacct.h: 1.11 99/09/06 11:47:10 by obarring 
Add two RFIO accounting subtypes

tape/dmpfil.c: 1.46 99/11/05 11:28:09 by baud 
fix percentages for DLT7000 and DAT

tape/dmpfil.c: 1.45 99/11/03 07:56:44 by baud 
use unsigned for sense bytes

tape/getcompstat.c: 1.2 99/11/09 16:33:00 by baud 
fix processing under AIX with ADSTAR driver

tape/readlbl.c: 1.21 99/08/23 16:09:34 by baud 
rc variable not set under some operating systems (DUX, linux) in case of medium/hardware error

tape/sonysubr.c: 1.6 99/11/11 07:43:57 by baud 
change locate timeout to 360 seconds (Solaris 2.6 problem)

tape/tpusage.c: 1.11 99/10/27 10:52:34 by baud 
make it Y2K compliant

tape/tpusage.man: 1.5 99/10/27 15:00:28 by baud 
make it Y2K compliant

rfio/Imakefile: 1.72 99/11/11 13:31:02 by baud 
move service.obj from common to rfio subdirectory

rfio/rfio_calls.c: 3.77 99/07/26 18:09:29 by obarring 
Change WORD -> int for uid and gid declarations to support uid's>32K

rfio/rfio_serv.c: 3.60 99/09/06 12:05:22 by obarring 
Add accounting for server startup and fix include error

rfio/xyopen.c: 3.21 99/07/26 14:23:25 by obarring 
Fix MAKE_LOCALSTR macro for non-STDC compilers

rtcopy/dktotpF.c: 2.43 99/11/10 14:39:29 by baud 
fix compression statistics

rtcopy/dktotpU.c: 2.36 99/11/10 14:44:38 by baud 
fix compression statistics

rtcopy/err_messages: 1.42 99/10/13 08:09:02 by baud 
add message "DMS recover request"

rtcopy/err_messages: 1.41 99/10/07 08:11:22 by baud 
add message "DIR remote selector is OFF"

rtcopy/err_messages: 1.40 99/09/07 15:32:14 by baud 
change category of "ERROR OPENING DISK FILE: I/O error" and "ERROR WRITING ON DISK: I/O error" from SHIFT to OTHER

rtcopy/rtcopy.h: 2.21 99/11/03 16:11:14 by obarring 
Remove ifdef for linux on COMPRESSION_STATS

rtcopy/rtcopy.shift: 2.121 99/07/26 09:00:01 by obarring 
Change mail->mailx for SD3 special retry message on Linux

rtcopy/rtcopyerr.h: 1.12 99/08/20 17:14:04 by obarring 
Fix compression messages

rtcopy/rtstat.c: 1.21 99/10/27 10:56:18 by baud 
make it Y2K compliant

rtcopy/rtstat.man: 1.3 99/10/27 14:35:17 by baud 
make it Y2K compliant

rtcopy/tpio.c: 1.42 99/11/10 14:46:20 by baud 
fix compression statistics

rtcopy/tptodkF.c: 2.53 99/11/10 14:41:04 by baud 
fix compression statistics

rtcopy/tptodkU.c: 2.38 99/11/10 14:43:14 by baud 
fix compression statistics

tms/tmsdaemon.c: 1.36 99/08/19 09:24:26 by baud 
avoid crash when opnmsgr fails

stage/procio.c: 1.42 99/08/24 09:39:36 by baud 
ignore -A deferred for a non tape request (to avoid crash in procupd)

stage/procqry.c: 1.22 99/10/27 10:41:26 by baud 
make it Y2K compliant

stage/stageqry.man: 1.15 99/10/28 07:02:53 by baud 
make it Y2K compliant

stage/stagestat.c: 1.4 99/10/29 08:27:24 by baud 
suppress some warnings under IRIX6

stage/stagestat.c: 1.3 99/10/27 10:42:02 by baud 
make it Y2K compliant

stage/stagestat.man: 1.2 99/10/27 14:46:03 by baud 
make it Y2K compliant

************************ VERSION 1.10.3.4 *****************************
./README: 1.51 99/07/02 14:29:31 by baud 
1.10.3.4 release

tape/tperror.c: 1.25 99/07/01 17:07:20 by baud 
give message "BOT hit" instead of "no sense key available" when backspacing into bot under linux

rfio/xyopen.c: 3.20 99/07/02 14:09:55 by obarring 
make local copy of string arguments (tptodkU core-dump)

rtcopy/rtcopyd.c: 2.79 99/06/28 07:49:55 by baud 
check for NULL pointer

rtcopy/rtcopyerr.h: 1.11 99/07/01 16:10:49 by obarring 
RATES->RATE in compression rate message (RT217)

************************ VERSION 1.10.3.3 *****************************
common/Imakefile: 1.28 99/06/18 15:57:13 by baran 
getregkey.obj added to SYSDEP_OBJS for WIN32

examples/Imakefile: 1.13 99/06/11 17:34:53 by baud 
add support for NIS under linux

h/rfio.h: 3.52 99/06/18 15:59:42 by baran 
WIN32: some global variables declared with __declspec(thread) attribute

tape/Imakefile: 1.54 99/06/18 10:50:02 by baud 
add getcompstat

tape/dmpfil.c: 1.44 99/06/17 16:01:23 by baud 
handle correctly tapemark and blank tape under linux

tape/dmpfil.c: 1.43 99/05/27 17:41:11 by baud 
define sum_block_length as off_t instead of int

NEW file: tape/getcompstat.c(1.1)
tape/getcompstat.c: 1.1 99/06/18 10:47:38 by baud 
date and time created 99/06/18 10:47:38 by baud

tape/lddisplay.c: 1.11 99/05/27 15:03:19 by baud 
correct msglen field for Adstar tape drive on byte swapped machines like alpha or PCs

tape/mounttape.c: 1.95 99/06/25 08:08:58 by baud 
add 3rd parameter on wrttpmrk calls and flush buffer at EOI for Redwood

tape/mounttape.c: 1.94 99/06/25 07:23:57 by baud 
fix argument list for erase_sony

tape/posittape.c: 1.38 99/06/18 07:07:32 by baud 
add fast positionning under linux

tape/readlbl.c: 1.20 99/06/17 17:02:08 by baud 
handle correctly large blocks, tape marks and blank tape under linux

tape/skiptape.c: 1.13 99/06/17 17:05:43 by baud 
add support for fast positionning under linux

tape/tperror.c: 1.24 99/06/17 17:33:42 by baud 
add support for sense bytes and residual count under linux

tape/usrlbl.c: 1.21 99/06/25 08:33:29 by baud 
add 3rd parameter on wrttpmrk calls and flush buffer at EOI for Redwood; add EOT processing under linux

tape/wrttpmrk.c: 1.10 99/06/25 07:58:30 by baud 
add nb tapemarks to the argument list

rfio/access.c: 1.5 99/06/18 16:05:03 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/chmod.c: 1.3 99/06/18 16:06:33 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/chown.c: 1.4 99/06/18 16:07:29 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/connect.c: 3.15 99/06/18 16:08:56 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/error.c: 3.18 99/06/18 16:09:52 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/fclose.c: 3.5 99/06/18 16:10:41 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/lockf.c: 1.3 99/06/18 16:11:35 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/lstat.c: 1.6 99/06/18 16:12:20 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/mkdir.c: 1.5 99/06/18 16:12:57 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/mstat.c: 1.10 99/06/18 16:13:43 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/open.c: 3.26 99/06/18 16:14:26 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/parse.c: 3.19 99/06/18 16:15:56 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/pclose.c: 1.9 99/06/18 16:16:30 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/popen.c: 1.12 99/06/18 16:17:18 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/pread.c: 1.8 99/06/18 16:18:38 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/pwrite.c: 1.4 99/06/18 16:18:59 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/read.c: 3.16 99/06/18 16:20:23 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/rename.c: 1.5 99/06/18 16:20:52 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/rfio_serv.c: 3.59 99/06/21 13:11:25 by obarring 
Make sure max_rcvbuf & max_sndbuf are set for inetd started rfiod

rfio/rfio_serv.c: 3.58 99/06/18 16:22:29 by baran 
WIN32: used rfiod_stop() instead of exit()

rfio/rmdir.c: 1.2 99/06/18 16:21:25 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rfio/statfs.c: 1.5 99/06/18 16:21:55 by baran 
WIN32: global variables declared with __declspec(thread) attribute

rtcopy/dktotpF.c: 2.42 99/06/23 18:10:18 by obarring 
Remove compression support for OSF1DLT (never used).

rtcopy/dktotpF.c: 2.41 99/06/18 14:11:02 by obarring 
Add compression statistics for linux

rtcopy/dktotpU.c: 2.35 99/06/23 18:11:26 by obarring 
Remove compression statics for OSF1DLT (never used).

rtcopy/dktotpU.c: 2.34 99/06/18 14:43:18 by obarring 
Add compression statistics for linux

rtcopy/rtcopy.h: 2.20 99/06/23 17:11:11 by obarring 
Add typedef for COMPRESSION_STATS on linux (and remove OSF1 definition)

rtcopy/rtcopyd.c: 2.78 99/04/29 09:43:07 by obarring 
Change acct[] to acctstr[] to avoid name clash with acct() (unistd.h)

rtcopy/tpio.c: 1.41 99/05/26 09:51:56 by baud 
under Solaris, the Sony drive in raw mode must be opened with the correct mode (not always O_RDWR)

rtcopy/tptodkF.c: 2.52 99/06/23 18:12:28 by obarring 
Remove compression statistics for OSF1DLT (never used).

rtcopy/tptodkF.c: 2.51 99/06/18 14:03:33 by obarring 
Add compression statistics for linux

rtcopy/tptodkU.c: 2.37 99/06/23 18:13:28 by obarring 
Remove compression statistics for OSF1DLT (never used).

rtcopy/tptodkU.c: 2.36 99/06/18 14:37:52 by obarring 
Add compression statistics for linux

commands/newacct.c: 1.5 99/06/14 17:42:40 by baud 
add extern declaration for optarg and optind

NEW file: win32/getregkey.c(1.1)
win32/getregkey.c: 1.1 99/06/18 15:51:17 by baran 
date and time created 99/06/18 15:51:17 by baran

win32/service.c: 1.2 99/06/18 15:47:05 by baran 
logging error messages to event log added

win32/ws_errmsg.c: 1.2 99/06/18 15:52:56 by baran 
error names removed from error messages

win32/ws_errmsg.h: 1.4 99/06/18 15:54:24 by baran 
error names removed from error messages

win32/ws_errmsg.h: 1.3 99/04/30 17:19:41 by baran 
corrected 11/11/99 SCCS keyword

win32/ws_errmsg.h: 1.2 99/04/30 17:16:58 by baran 
WSA constants removed from error messages

stage/Imakefile: 1.31 99/06/15 07:43:56 by baud 
set execute bit on cpdskdsk in current directory because IEXPORT just copies the file with its current mode without setting it explicitely

stage/cpdskdsk.sh: 1.6 99/06/15 10:35:36 by baud 
correct typo: $USERR instead of USERR

copytape/Imakefile: 1.24 99/04/09 07:27:12 by baud 
fix creation of /usr/spool/copytape/tpcopy

copytape/tpcpin.ksh: 1.5 99/04/14 10:15:26 by boissat 
Path extended (for Solaris)

copytape/tpcpout.ksh: 1.6 99/04/14 10:16:32 by boissat 
Path extended (for Solaris)

************************ VERSION 1.10.3.2 *****************************
./README: 1.50 99/04/07 07:19:31 by baud 
1.10.3.2 release

rfio/feof.c: 3.8 99/04/06 11:11:55 by boissat 
Fixing wrong casting with RFILE structure.

rfio/fflush.c: 3.4 99/04/06 11:14:14 by boissat 
Fixing wrong casting with RFILE structure.

rfio/fread.c: 3.10 99/04/06 11:12:54 by boissat 
Fixing wrong casting with RFILE structure.

rfio/fseek.c: 1.5 99/04/06 11:14:57 by boissat 
Fixing wrong casting with RFILE structure.

rfio/fwrite.c: 3.8 99/04/06 11:15:36 by boissat 
Fixing wrong casting with RFILE structure.

rfio/rfio_calls.c: 3.76 99/04/06 11:01:05 by obarring 
Fix setgrent() call again (version clash disabled previous fix).

************************ VERSION 1.10.3.1 *****************************
./README: 1.49 99/04/02 16:17:57 by baud 
1.10.3.1 release

common/Imakefile: 1.27 99/03/26 16:13:00 by baran 
added rules for Windows/NT new files: inet_netof.c, service.c

common/getuser.c: 1.4 99/03/26 16:15:26 by baran 
update of Windows/NT version

common/remote.c: 1.11 99/03/26 16:18:38 by baran 
added Windows/NT version 

tape/Imakefile: 1.53 99/04/02 16:12:51 by baud 
add support for NIS under linux

rfio/Imakefile: 1.71 99/04/02 16:01:54 by baud 
add support for NIS under linux

rfio/Imakefile: 1.70 99/03/26 16:26:36 by baran 
changed wsock2.lib to ws2_32.lib

NEW file: rfio/README.Win32(1.1)
rfio/README.Win32: 1.1 99/03/26 18:55:53 by baran 
date and time created 99/03/26 18:55:53 by baran

rfio/feof.c: 3.7 99/03/26 09:38:44 by boissat 
Fixing problem with wrong descriptor in remote I/O mode.
.

rfio/fflush.c: 3.3 99/03/26 09:44:53 by boissat 
Fixing problem with wrong descriptor in remote I/O mode.

rfio/fread.c: 3.9 99/03/26 09:45:50 by boissat 
Fixing problem with wrong descriptor in remote I/O mode.

rfio/fseek.c: 1.4 99/03/26 09:47:05 by boissat 
Fixing problem with wrong descriptor in remote I/O mode.

rfio/fwrite.c: 3.7 99/03/26 09:48:11 by boissat 
Fixing problem with wrong descriptor in remote I/O mode.

rfio/parse.c: 3.18 99/03/26 16:30:25 by baran 
add DOS path format recognition (hostname:x:/path/name, where x 
is the drive)

rfio/pclose.c: 1.8 99/03/26 16:01:44 by baran 
corrected Windows/NT _pclose() function call

rfio/popen.c: 1.11 99/03/26 15:59:49 by baran 
corrected Windows/NT _popen() function call

rfio/rfio_calls.c: 3.75 99/03/26 16:35:35 by baran 
update of Windows/NT version (chsuser() and mapping for remote users added)

rfio/rfio_calls.c: 3.74 99/03/11 18:17:13 by obarring 
Don't check return from setgrent().

rfio/rfio_serv.c: 3.57 99/03/26 16:33:24 by baran 
update of Windows/NT version (rfiod on NT now works as the system service)

rtcopy/Imakefile: 1.44 99/04/02 16:05:27 by baud 
add support for NIS under linux

sysreq/Imakefile: 1.19 99/04/02 16:10:30 by baud 
add support for NIS under linux

tms/Imakefile: 1.12 99/04/02 16:14:47 by baud 
add support for NIS under linux

NEW file: win32/inet_netof.c(1.1)
win32/inet_netof.c: 1.1 99/03/26 16:07:49 by baran 
date and time created 99/03/26 16:07:49 by baran

NEW file: win32/install.c(1.2)
win32/install.c: 1.2 99/03/26 16:10:44 by baran 
added missing sccsid & keywords

NEW file: win32/service.c(1.1)
win32/service.c: 1.1 99/03/26 16:07:55 by baran 
date and time created 99/03/26 16:07:55 by baran

win32/uxid.c: 1.7 99/03/26 16:06:05 by baran 
added setuid() and getuid() (empty for now)

config/site.def: 1.35 99/03/26 16:24:21 by baran 
added MappingFile, LocalHostsList and RemoteHostsList for Windows/NT

stage/Imakefile: 1.30 99/04/02 16:08:48 by baud 
add support for NIS under linux

copytape/Imakefile: 1.23 99/04/02 15:58:08 by baud 
add support for NIS under linux

************************ VERSION 1.10.3.0 *****************************
./README: 1.48 99/03/10 10:54:53 by baud 
1.10.3 release

common/Imakefile: 1.26 99/02/15 08:26:31 by baud 
add support for NIS under linux

common/Imakefile: 1.25 99/02/10 12:07:08 by baud 
add getacctent man page

common/Imakefile: 1.24 99/02/04 08:22:59 by baud 
add ypgetacct to the list of members in the library

common/getacct.man: 2.1 99/02/10 11:58:11 by baud 
date and time created 99/02/10 11:58:11 by baud

common/getacctent.c: 1.3 99/02/10 08:40:58 by baud 
a few fclose were missing

common/getacctent.man: 1.2 99/02/10 10:30:57 by baud 
better description

rfio/rfio_calls.c: 3.73 99/03/03 16:07:03 by obarring 
Add support for multiple groups

rtcopy/Imakefile: 1.43 99/02/10 14:58:04 by baud 
add tpwrite man page

rtcopy/err_messages: 1.39 99/03/01 17:29:07 by baud 
add message "fork() failed: too many processes"

rtcopy/err_messages: 1.38 99/02/07 07:59:33 by baud 
add message "MISPLACED_TAPE"

rtcopy/err_messages: 1.37 99/01/25 17:51:11 by baud 
add message "DMS initial request"

rtcopy/rtcopyd.c: 2.77 99/03/03 11:52:14 by obarring 
Add setgrent()/endgrent() calls

rtcopy/rtcopyd.c: 2.76 99/02/10 08:23:58 by baud 
add support for "use of multiple accounts by a single login name"

rtcopy/tptodkF.c: 2.50 99/02/08 11:13:17 by obarring 
Add nbread:total:ptr printout if ENOSPC on rfio_close()

NEW file: rtcopy/tpwrite.man(1.1)
rtcopy/tpwrite.man: 1.1 99/02/10 14:50:08 by baud 
date and time created 99/02/10 14:50:08 by baud

commands/Imakefile: 1.12 99/02/18 16:14:38 by baud 
add support for NIS

commands/Imakefile: 1.11 99/02/11 10:42:05 by baud 
set suid bit on newacct

commands/newacct.c: 1.4 99/03/04 15:01:06 by baud 
set gid; add option -s for shell

commands/newacct.man: 1.2 99/03/05 09:15:52 by baud 
set gid; add option -s for shell; add examples

win32/grp.h: 1.2 99/02/16 10:03:06 by baud 
add declaration for getgrnam()

win32/uxid.c: 1.6 99/02/16 10:04:15 by baud 
add function getgrnam()

stage/buildupath.c: 1.14 99/01/29 10:32:46 by baud 
fix when current working directory is /shift/....

stage/stager.c: 1.35 99/02/18 16:07:12 by baud 
use getdtablesize() instead of _NFILE under IRIX6

stage/stager.c: 1.34 99/01/28 08:38:26 by baud 
use getdtablesize() instead of _NFILE under SOLARIS 2.5 and higher

stage/stgdaemon.c: 2.34 99/02/18 16:08:20 by baud 
use getdtablesize() instead of _NFILE under IRIX6

stage/stgdaemon.c: 2.33 99/01/28 08:42:12 by baud 
use getdtablesize() instead of _NFILE under SOLARIS 2.5 and higher

************************ VERSION 1.10.2.18 *****************************
./README: 1.47 99/01/21 15:54:21 by baud 
1.10.2.18 release

common/Imakefile: 1.23 98/12/11 15:37:58 by baran 
update of Windows/NT support (add rules for ws_errmsg.c file)

common/Imakefile: 1.22 98/10/30 17:31:42 by obarring 
Add support for HPSS (High Performance Storage System)

common/sendscsicmd.c: 1.16 98/11/24 17:02:19 by baud 
suppress extra /* in comment

h/Imakefile: 1.10 98/12/09 16:20:35 by baud 
delete extra space at end of line

h/rfio.h: 3.51 99/01/08 13:33:29 by obarring 
Add requests for secure stat()'s

h/rfio.h: 3.50 98/11/24 15:53:12 by obarring 
Add request type and function prototype for remote chmod()

h/rfio.h: 3.49 98/11/24 14:57:10 by obarring 
Add request type and function prototype for rfio_rmdir()

h/rfio.h: 3.48 98/10/30 16:53:13 by obarring 
Add support for HPSS (High Performance Storage System)

h/rfio.h: 3.47 98/10/27 07:47:06 by hemmer 
min() always defined in stdlib.h

h/sacct.h: 1.10 98/11/30 14:43:20 by obarring 
Add RFIO accounting

lib/Imakefile: 1.11 98/11/09 16:16:43 by obarring 
Add support for HPSS (High Performance Storage System)

msg/oper.c: 1.18 98/12/09 16:26:06 by baud 
use "nodelay" instead of "fcntl(0,F_SETFL,FNDELAY)" under linux

tape/dmpfil.c: 1.42 99/01/19 08:44:10 by baud 
add support for STK9840; fix for DLT with vision box

tape/dumplabel.sh: 1.3 98/12/09 14:41:02 by baud 
allow for 6 characters device group names

tape/dumptape.sh: 1.24 98/12/09 12:14:44 by baud 
allow for 6 characters device group names

tape/mounttape.c: 1.93 99/01/19 09:57:53 by baud 
add support for STK9840

tape/posittape.c: 1.37 98/10/28 13:47:52 by baud 
add support for STK9840

tape/smc.c: 1.5 98/11/26 17:33:11 by baud 
fix import of several cartridges

tape/smcsubr.c: 1.6 98/11/26 18:03:09 by baud 
drive element size is now different from the other element sizes in STK9710 robots

tape/tperror.c: 1.23 99/01/21 13:43:32 by baud 
give message "BOT hit" instead of "no sense key available" when backspacing into bot under AIX

tape/tperror.c: 1.22 99/01/15 09:51:02 by baud 
give message "BOT hit" instead of "no sense key available" when backspacing into bot under Digital Unix 4.0D

tape/unloadtps.c: 1.28 98/10/28 13:43:35 by baud 
add support for STK9840

tape/usrlbl.c: 1.20 99/01/19 09:43:55 by baud 
1 tapemark at EOI for STK9840

rfio/Imakefile: 1.69 98/11/30 14:45:34 by obarring 
Add RFIO accounting

rfio/Imakefile: 1.68 98/11/24 15:57:16 by obarring 
Add chmod client routine

rfio/Imakefile: 1.67 98/11/24 15:03:05 by obarring 
Add rmdir client routine

rfio/Imakefile: 1.66 98/11/10 15:06:51 by obarring 
Distinguish HPSS server and client options (HPSS and HPSSCLIENT resp.)

rfio/Imakefile: 1.65 98/11/09 14:22:33 by obarring 
Add HpssClient support

rfio/Imakefile: 1.64 98/11/06 18:46:56 by obarring 
Fix problem with empty -I if HPSSINCLUDES is undefined

rfio/Imakefile: 1.63 98/11/04 12:10:43 by obarring 
Add missing -D_SOCKADDR_LEN for HPSS

rfio/Imakefile: 1.62 98/11/02 11:44:42 by obarring 
HPSS version cannot be linked non_shared on alpha.

rfio/Imakefile: 1.61 98/10/30 19:14:15 by obarring 
Add forgotten MakeDepLib for HPSS support

rfio/Imakefile: 1.60 98/10/30 18:44:16 by obarring 
Add dependency on rfio_hpss library if HPSS is flagged

rfio/Imakefile: 1.59 98/10/30 17:01:41 by obarring 
Add support for HPSS (High Performance Storage System)

rfio/Imakefile: 1.58 98/10/27 07:53:49 by hemmer 
Support for WIN32 file naming 

rfio/checkkey.c: 1.4 98/10/29 17:25:20 by obarring 
Add support for HPSS (High Performance Storage System)

NEW file: rfio/chmod.c(1.2)
rfio/chmod.c: 1.2 99/01/21 15:45:46 by obarring 
Fix description text

rfio/lstat.c: 1.5 99/01/08 15:02:01 by obarring 
Add support for secure lstat()

rfio/mstat.c: 1.9 99/01/08 15:01:36 by obarring 
Add support for secure stat()

rfio/rfcp.c: 1.27 98/11/12 17:41:03 by obarring 
Check output directory as well as file for HPSS.

rfio/rfcp.c: 1.26 98/11/10 12:14:50 by obarring 
Correct the treatment of gaps in HPSS files.

rfio/rfcp.c: 1.25 98/11/10 09:46:48 by obarring 
Change HPSS -> HPSSCLIENT to distinguish between HPSS client/server

rfio/rfcp.c: 1.24 98/11/06 18:32:51 by obarring 
Add support for HPSS (High Performance Storage System)

rfio/rfdir.c: 1.10 99/01/14 16:21:56 by obarring 
Add listing for socket filetype and SUID/SGID mode bits

rfio/rfdir.c: 1.9 99/01/08 15:30:17 by obarring 
Use smstat to speed up (specially for HPSS) and allow mixed local and remote listings

rfio/rfdir.c: 1.8 98/11/12 17:30:52 by obarring 
Add support for -R option for recursive listing of subdirs.

rfio/rfio_calls.c: 3.72 99/01/13 17:14:52 by obarring 
Add support for secure stat() and lstat()

rfio/rfio_calls.c: 3.71 98/12/11 15:53:40 by baran 
update of Windows/NT version

rfio/rfio_calls.c: 3.70 98/12/10 11:53:55 by obarring 
call thread-safe getpwuid for HPSS

rfio/rfio_calls.c: 3.69 98/12/02 11:03:03 by obarring 
Set SNDBUF on correct socket. No TCP_NODELAY on DUNIX for Hippi perf.

rfio/rfio_calls.c: 3.68 98/12/02 10:55:06 by obarring 
Add infop to readdir()/rewinddir and closedir() calls for accounting

rfio/rfio_calls.c: 3.67 98/11/30 14:13:41 by obarring 
Add RFIO accounting

rfio/rfio_calls.c: 3.66 98/11/24 15:46:24 by obarring 
Add remote chmod()

rfio/rfio_calls.c: 3.65 98/11/24 14:53:33 by obarring 
Add srrmdir() for remote directory remove

rfio/rfio_calls.c: 3.64 98/11/06 12:02:30 by obarring 
add gid to HPSS calls

rfio/rfio_calls.c: 3.63 98/11/02 15:39:59 by obarring 
Make sure rsopendir() returns NULL if call fails

rfio/rfio_calls.c: 3.62 98/10/29 10:45:03 by obarring 
Add support for HPSS (High Performance Storage System)

rfio/rfio_fcalls.c: 3.19 98/12/11 15:56:15 by baran 
update of Windows/NT version (change socket type from int to SOCKET)

rfio/rfio_fcalls.c: 3.18 98/10/28 17:59:20 by obarring 
Add support for HPSS (High Performance Storage System)

rfio/rfio_serv.c: 3.56 99/01/13 17:17:37 by obarring 
Add support for secure stat() and lstat().

rfio/rfio_serv.c: 3.55 98/12/11 16:04:05 by baran 
update of Windows/NT version

rfio/rfio_serv.c: 3.54 98/12/02 10:56:10 by obarring 
Add info structure in readdir/rewinddir and closedir calls

rfio/rfio_serv.c: 3.53 98/11/30 14:16:00 by obarring 
Add RFIO accounting

rfio/rfio_serv.c: 3.52 98/11/24 15:47:59 by obarring 
Add support for remote chmod()

rfio/rfio_serv.c: 3.51 98/11/24 14:59:02 by obarring 
Add support for remote directory remove, srrmdir()

rfio/rfio_serv.c: 3.50 98/10/28 17:46:21 by obarring 
Add support for HPSS (High Performance Storage System)

rfio/rfio_serv.c: 3.49 98/10/28 12:04:25 by hemmer 
AIX compilers do not like <CR> in #if preprocessor statements.

NEW file: rfio/rfioacct.c(1.2)
rfio/rfioacct.c: 1.2 99/01/14 15:34:42 by obarring 
Fix Win32 includes

rfio/rfmkdir.c: 1.6 99/01/08 14:38:55 by obarring 
Support /scratch and /hpss root paths

rfio/rfrename.c: 1.2 99/01/08 14:43:29 by obarring 
Support /scratch and /hpss root paths

rfio/rfrm.c: 1.7 99/01/08 14:45:34 by obarring 
Support /scratch and /hpss root paths

rfio/rfrm.c: 1.6 98/11/24 15:08:18 by obarring 
Use rmdir(). Enforce confirmation for directory removal.

NEW file: rfio/rmdir.c(1.1)
rfio/rmdir.c: 1.1 98/11/24 14:59:57 by obarring 
date and time created 98/11/24 14:59:57 by obarring

rfio/stat.c: 3.9 99/01/08 14:26:03 by obarring 
Add support for secure stat()

rfio/stream.c: 1.16 98/12/14 10:01:41 by obarring 
Don't set TCP_NODELAY on DUXV4 to avoid too small Hippi packets

rtcopy/Imakefile: 1.42 98/12/30 13:51:20 by baud 
create ERRLISTDIR before copying err_messages

rtcopy/err_messages: 1.36 99/01/19 17:45:49 by baud 
add message "recv error : Connection reset by peer"

rtcopy/err_messages: 1.35 98/11/23 14:40:01 by baud 
add messages "ioctl error : Unit attention" and "read error : Unable to Abort CCB request"

rtcopy/err_messages: 1.34 98/10/26 17:55:22 by baud 
add message "ERROR CLOSING DISK FILE: Disc quota exceeded"

rtcopy/rtcopy.shift: 2.120 98/12/09 12:02:58 by obarring 
Get all 6 characters instead of 4 for devgroup in the VIDMAP reply

tms/tmsexit.c: 1.11 98/12/09 12:17:45 by baud 
allow for 6 characters device group names

NEW file: win32/ws_errmsg.c(1.1)
win32/ws_errmsg.c: 1.1 98/12/11 15:26:04 by baran 
date and time created 98/12/11 15:26:04 by baran

NEW file: win32/ws_errmsg.h(1.1)
win32/ws_errmsg.h: 1.1 98/12/11 15:26:12 by baran 
date and time created 98/12/11 15:26:12 by baran

config/Library.tmpl: 1.12 98/11/09 16:29:30 by obarring 
Add support for HPSS (High Performance Storage System)

config/Project.tmpl: 1.13 98/10/30 13:49:22 by obarring 
Add support for HPSS (High Performance Storage System)

config/site.def: 1.34 98/10/30 13:46:59 by obarring 
Add support for HPSS (High Performance Storage System)

stage/procio.c: 1.41 99/01/14 14:05:49 by baud 
initialize variable nbdskf in case of -M option on stageput

stage/stagein.c: 1.40 98/12/09 12:19:37 by baud 
allow for 6 characters device group names

stage/stgdaemon.c: 2.32 99/01/16 08:49:20 by baud 
fix typo error in variable name

copytape/copytape.c: 1.22 98/12/09 12:21:22 by baud 
allow for 6 characters device group names

************************ VERSION 1.10.2.17 *****************************
./README: 1.46 98/10/26 17:30:17 by hemmer 
1.10.2.17 release

rfio/rfio_calls.c: 3.61 98/10/26 17:19:37 by hemmer 
WSA refs only valid in NT; This should really move out of this file

rfio/rfio_calls.c: 3.60 98/10/26 17:17:36 by hemmer 
Missing semi-colon

rfio/rfio_fcalls.c: 3.17 98/10/26 17:27:05 by hemmer 
Duplicate defs of iobuffer, iobufsiz, rqst_buf

************************ VERSION 1.10.2.16 *****************************
./README: 1.45 98/10/26 10:53:04 by baud 
1.10.2.16 release

./README: 1.44 98/10/26 10:34:49 by hemmer 
1.10.2.16 release

h/rfio.h: 3.46 98/10/21 19:48:10 by baran 

h/rfio.h: 3.45 98/10/21 19:42:32 by baran 
added missing SCCS id keywords

h/rfio.h: 3.44 98/10/16 17:24:45 by baran 
added #ifdefs to make it compile & link under Windows NT.

tape/mounttape.c: 1.92 98/09/29 14:14:44 by baud 
fix reselect for SOLARIS25

tape/mounttape.c: 1.91 98/09/24 11:28:27 by baud 
clear eei status after tape mount under Digital Unix 4.0

tape/posittape.c: 1.36 98/10/06 08:56:47 by baud 
under Digital Unix, a skiptpfb is necessary after finding blank tape before writing a new file

tape/posittape.c: 1.35 98/09/30 15:47:15 by baud 
under Solaris 2.5.1, bsf 0 is not a noop, but does fsf 1 + bfs 1; the fsf 1 of course fails if already at eod

tape/tperror.c: 1.21 98/09/24 11:29:45 by baud 
add support for Digital Unix 4.0D

rfio/Imakefile: 1.57 98/10/26 09:03:08 by hemmer 
Not all programs tested under NT

rfio/rfdir.c: 1.7 98/10/21 19:41:09 by baran 
added missing SCCS id keywords

rfio/rfdir.c: 1.6 98/10/16 17:43:20 by baran 
added #ifdefs to make it compile & link under Windows NT

rfio/rfio_calls.c: 3.59 98/10/21 19:34:04 by baran 
added missing SCCS id keywords

rfio/rfio_calls.c: 3.58 98/10/16 17:13:48 by baran 
add support for Windows NT

rfio/rfio_fcalls.c: 3.16 98/10/21 19:36:27 by baran 
added missing SCCS id keywords

rfio/rfio_fcalls.c: 3.15 98/10/16 17:19:13 by baran 
make it compile & link under Windows NT

rfio/rfio_serv.c: 3.48 98/10/21 19:28:48 by baran 

rfio/rfio_serv.c: 3.47 98/10/21 19:24:39 by baran 
fixed SCCS id keywords

rfio/rfio_serv.c: 3.46 98/10/16 17:04:20 by baran 
add support for Windows NT

rfio/rfmkdir.c: 1.5 98/10/16 17:50:50 by baran 
added #ifdefs to make it compile & link under Windows NT

rfio/rfmkdir.c: 1.4 98/10/05 15:00:14 by obarring 
Read mode in octal and NOT decimal

rfio/rfrm.c: 1.5 98/10/21 19:39:57 by baran 
added missing SCCS id keywords

rfio/rfrm.c: 1.4 98/10/16 17:50:15 by baran 
added #ifdefs to make it compile & link under Windows NT

rtcopy/err_messages: 1.33 98/10/06 11:15:46 by baud 
add message "ERROR READING FROM TAPE: Cannot Establish Connection"

rtcopy/err_messages: 1.32 98/10/02 15:26:43 by baud 
add message "read error : Timeout"

rtcopy/rtcopyd.c: 2.75 98/10/12 14:43:48 by obarring 
Fix defunc's on SOLARIS if started in standalone mode.

win32/syslog.c: 1.5 98/10/21 19:50:59 by baran 
made use of 'ident' parameter passed to openlog call (previously ignored)

config/Win32.cf: 1.5 98/10/21 19:53:43 by baran 
fixed missing SCCS id keywords

config/Win32.cf: 1.4 98/10/16 17:35:40 by baran 
added /MT compiler option

************************ VERSION 1.10.2.15 *****************************
./README: 1.43 98/09/21 15:15:16 by baud 
1.10.2.15 release

h/rfio.h: 3.43 98/09/21 10:11:47 by obarring 
Fix for HPUX cc -Aa (non-Posix) compilation

tape/dmpfil.c: 1.41 98/09/18 13:33:00 by baud 
dump correctly tapes without tapemark between header label and data

rfio/rfdir.c: 1.5 98/09/18 13:42:01 by obarring 
Use rfio_mstat() instead of rfio_stat() to improve perf.

rfio/rfdir.man: 1.2 98/09/21 11:20:52 by obarring 
Add note on date/time field (modification time).

rfio/rfio_calls.c: 3.57 98/09/17 15:43:04 by boissat 
Rfiod not working when starting by inetd; setsockopt operation
on wrong socket handle...
.

sysreq/netreq.c: 1.31 98/09/21 11:07:26 by obarring 
Do END_TRACE and return save_errno if getpwuid() fails.

stage/stagein.c: 1.39 98/09/21 11:54:21 by baud 
check if the uid is valid before calling tmscheck

stage/stgdaemon.c: 2.31 98/09/17 11:49:58 by baud 
allow for more thar 99 subrequests in a request

************************ VERSION 1.10.2.14 *****************************
./README: 1.42 98/09/14 10:34:27 by baud 
1.10.2.14 release

tape/dmpfil.c: 1.40 98/09/10 09:39:37 by baud 
fix code for Redwood (it was crashing on Digital Unix 4.0D)

rfio/Imakefile: 1.56 98/09/09 14:02:38 by obarring 
Add man-pages for rfcp, rfdir, rfmkdir, rfrename and rfrm

************************ VERSION 1.10.2.13 *****************************
./README: 1.41 98/09/08 09:31:38 by baud 
1.10.2.13 release

NEW file: rfio/rfcp.man(1.2)
rfio/rfcp.man: 1.2 98/09/07 16:50:33 by baud 
Added support for text/binary mode and for @filename notation (WIN/NT only)

rfio/rfdir.c: 1.4 98/09/07 09:43:06 by obarring 
fix ctime -> mtime

NEW file: rfio/rfdir.man(1.1)
rfio/rfdir.man: 1.1 98/09/07 14:10:23 by obarring 
date and time created 98/09/07 14:10:23 by obarring

NEW file: rfio/rfmkdir.man(1.1)
rfio/rfmkdir.man: 1.1 98/09/07 14:10:41 by obarring 
date and time created 98/09/07 14:10:41 by obarring

NEW file: rfio/rfrename.man(1.1)
rfio/rfrename.man: 1.1 98/09/07 14:11:19 by obarring 
date and time created 98/09/07 14:11:19 by obarring

NEW file: rfio/rfrm.man(1.1)
rfio/rfrm.man: 1.1 98/09/07 14:11:42 by obarring 
date and time created 98/09/07 14:11:42 by obarring

stage/stageclr.man: 1.7 98/09/07 17:19:47 by baud 
add -M and -remove_from_hsm options for HSM files

stage/stagein.man: 1.31 98/09/07 13:21:43 by baud 
add option -M

stage/stageout.man: 1.9 98/09/08 08:50:55 by baud 
add option -M

stage/stageput.man: 1.7 98/09/08 08:43:04 by baud 
add option -M

stage/stageqry.man: 1.14 98/09/07 14:51:40 by baud 
add options -f and -M

stage/stagewrt.man: 1.9 98/09/08 08:35:30 by baud 
add option -M

************************ VERSION 1.10.2.12 *****************************
./README: 1.40 98/09/03 17:10:26 by baud 
1.10.2.12 release

h/rfio.h: 3.42 98/09/03 14:27:09 by baud 
save pointer to structure returned by popen (HPUX pclose can't work on a copy of the structure)

tape/tpusage.c: 1.10 98/09/03 14:51:38 by baud 
avoid segmentation violation when accthdr->len > sizeof(buf)

rfio/fseek.c: 1.3 98/09/03 13:45:22 by baud 
correct TRACE message

rfio/pclose.c: 1.7 98/09/03 14:32:07 by baud 
save pointer to structure returned by popen (HPUX pclose can't work on a copy of the structure)

rfio/popen.c: 1.10 98/09/03 14:29:52 by baud 
save pointer to structure returned by popen (HPUX pclose can't work on a copy of the structure)

rfio/pread.c: 1.7 98/09/03 14:33:41 by baud 
save pointer to structure returned by popen (HPUX pclose can't work on a copy of the structure)

rfio/pwrite.c: 1.3 98/09/03 14:34:58 by baud 
save pointer to structure returned by popen (HPUX pclose can't work on a copy of the structure)

rtcopy/rtstat.c: 1.20 98/08/31 14:33:46 by baud 
avoid segmentation violation when accthdr->len > sizeof(buf)

stage/procio.c: 1.40 98/09/03 14:38:01 by baud 
fix -M feature

stage/procqry.c: 1.21 98/09/03 16:54:35 by baud 
add option -f to report full external or hsm filename; fix -L option; fix -M option

stage/stageqry.c: 1.15 98/09/03 16:57:30 by baud 
add option -f to report full external or hsm filenames

************************ VERSION 1.10.2.11 *****************************
./README: 1.39 98/08/27 09:37:37 by baud 
1.10.2.11 release

h/rfio.h: 3.41 98/08/25 12:39:53 by fabien 
Prototype and macro added for fseek routine

rfio/Imakefile: 1.55 98/08/26 12:11:19 by obarring 
Add rfrename

rfio/Imakefile: 1.54 98/08/24 14:49:07 by obarring 
Add support for rfrm, rfdir and rfmkdir

rfio/popen.c: 1.9 98/08/25 14:26:22 by fabien 
Bug fix when a local command a passed to popen with a command line containing a ':' char

rfio/rfcp.c: 1.23 98/08/24 17:53:00 by baud 
add option -s

NEW file: rfio/rfdir.c(1.3)
rfio/rfdir.c: 1.3 98/08/24 16:07:49 by obarring 
Do not prototype main and avoid aggregate init.

rfio/rfio_calls.c: 3.56 98/08/19 11:21:21 by hemmer 
Set socket option buffers at the right place (Fix from JS).

NEW file: rfio/rfmkdir.c(1.3)
rfio/rfmkdir.c: 1.3 98/08/24 16:08:51 by obarring 
Do not prototype main.

NEW file: rfio/rfrename.c(1.1)
rfio/rfrename.c: 1.1 98/08/26 09:33:43 by obarring 
date and time created 98/08/26 09:33:43 by obarring

NEW file: rfio/rfrm.c(1.3)
rfio/rfrm.c: 1.3 98/08/24 15:52:10 by obarring 
Do not prototype functions.

rtcopy/dktotpF.c: 2.40 98/07/17 14:30:01 by obarring 
Several mods for handling blksiz which is not a mult. of lrecl. Correct transf. time for concat.

rtcopy/dktotpF.c: 2.39 98/07/01 09:45:11 by obarring 
Remove tclose() when tcloserr() has already been called

rtcopy/dktotpF.c: 2.38 98/06/26 09:23:28 by obarring 
Fix "Invalid argument" to rfio_read() when -s option is specified

rtcopy/err_messages: 1.31 98/08/09 09:11:06 by baud 
add message "Cartridge not available" (TL820)

rtcopy/rtcopy.shift: 2.119 98/07/02 10:37:43 by obarring 
Fix bugs in the SD3 retries on tpmnt

rtcopy/rtcopy.shift: 2.118 98/07/01 17:54:44 by obarring 
Avoid SD3 special retries for SYRETRY

rtcopy/rtcopy.shift: 2.117 98/07/01 09:50:32 by obarring 
Make SD3 retries also for tpmntrc=5. Add printout if stageupdc fails.

rtcopy/rtcopy.shift: 2.116 98/06/25 08:54:34 by obarring 
Add special treatment and tracing of medium errors on Redwoods.

stage/Imakefile: 1.29 98/08/27 08:20:13 by baud 
use programs from BINDIR in cpdskdsk

stage/cpdskdsk.sh: 1.5 98/08/27 08:10:15 by baud 
add parameter -s and use programs from BINDIR

stage/poolmgr.c: 1.27 98/08/26 15:57:35 by baud 
add processing of NO_FILE_CREATION

stage/procclr.c: 1.10 98/08/26 15:40:39 by baud 
add -M and -remove_from_hsm options for HSM files

stage/procio.c: 1.39 98/08/28 08:53:16 by baud 
add option -M for HSM files

stage/procqry.c: 1.20 98/08/28 07:28:06 by baud 
add -M option for HSM files

stage/procupd.c: 1.21 98/08/26 15:51:14 by baud 
add support for HSM files

stage/procupd.c: 1.20 98/07/23 18:34:46 by baud 
truncate record format at 3 characters

stage/stage.h: 1.37 98/08/24 17:27:09 by baud 
add message "STG54 - HSM hostname not specified\n"

stage/stage.h: 1.36 98/08/24 15:07:30 by baud 
add structure elements for HSM files

stage/stageclr.c: 1.20 98/08/24 17:03:25 by baud 
add -M and -remove_from_hsm options for HSM files

stage/stagein.c: 1.38 98/08/24 17:29:14 by baud 
add -M option for HSM files

stage/stagein.c: 1.37 98/08/19 07:40:44 by baud 
move WSAStartup call to initialize socket interface before calling sysreq

stage/stageput.c: 1.17 98/08/24 15:16:21 by baud 
add -M option for HSM files

stage/stageqry.c: 1.14 98/08/24 16:54:40 by baud 
add -M option for HSM files

stage/stager.c: 1.33 98/08/28 06:45:37 by baud 
add support for HSM files

stage/stgdaemon.c: 2.30 98/08/26 17:21:26 by baud 
do not create empty files for Objectivity; implement remove_from_hsm

************************ VERSION 1.10.2.10 *****************************
./README: 1.38 98/06/15 11:46:55 by baud 
1.10.2.10 release

common/sendscsicmd.c: 1.15 98/06/15 10:14:52 by boissat 
Fix for WNT; stdio.h not included

common/sendscsicmd.c: 1.14 98/06/12 12:29:14 by boissat 
Port to LynxOs; stdio.h not included...

************************ VERSION 1.10.2.9 *****************************
./README: 1.37 98/06/12 09:46:54 by baud 
1.10.2.9 release

common/sendscsicmd.c: 1.13 98/06/12 09:41:02 by baud 
fix typo which prevented to compile on most platforms

************************ VERSION 1.10.2.8 *****************************
./README: 1.36 98/06/11 15:01:19 by baud 
add shift.inst

./README: 1.35 98/06/10 08:15:16 by baud 
1.10.2.8 release

./setosflags: 1.7 98/06/04 09:41:12 by baud 
add support for LynxOS

NEW file: ./shift.inst(1.1)
./shift.inst: 1.1 98/06/11 14:59:22 by baud 
date and time created 98/06/11 14:59:22 by baud

common/getifnam.c: 1.19 98/06/05 14:37:10 by baud 
add support for LynxOS

common/log.c: 1.27 98/06/04 11:20:33 by baud 
add support for LynxOS

common/sendscsicmd.c: 1.12 98/06/09 17:21:24 by baud 
always generate a send_scsi_cmd routine, but give a message if not supported on this platform

common/solveln.c: 1.5 98/06/04 11:37:06 by baud 
add support for LynxOS

h/rfcntl.h: 1.10 98/06/04 11:08:40 by baud 
add support for LynxOS

h/rfio.h: 3.40 98/06/02 18:11:02 by obarring 
Exclude openddir, readdir, rewinddir and closedir for NT.

tape/Imakefile: 1.52 98/05/29 11:07:10 by baud 
add rule for smc man page

tape/rbtsubr.c: 1.28 98/05/26 14:45:54 by baud 
rename element_info as smc_element_info to avoid clash with declaration in <sys/Atape.h>

tape/smc.c: 1.4 98/05/26 14:44:21 by baud 
rename element_info as smc_element_info to avoid clash with declaration in <sys/Atape.h>

tape/smc.h: 1.3 98/05/26 14:37:32 by baud 
rename element_info as smc_element_info to avoid clash with declaration in <sys/Atape.h>

tape/smcsubr.c: 1.5 98/05/29 08:41:13 by baud 
avoid compilation error under HP/UX

tape/smcsubr.c: 1.4 98/05/26 14:39:14 by baud 
rename element_info as smc_element_info to avoid clash with declaration in <sys/Atape.h>

rfio/Imakefile: 1.53 98/06/04 11:10:54 by baud 
add support for LynxOS

rfio/closedir.c: 1.2 98/06/02 18:02:17 by obarring 
Not supported for NT. dirent.h already included in rfio.h

rfio/connect.c: 3.14 98/05/29 15:02:05 by boissat 
Fix for NOMORERFIO under WNT
.

rfio/feof.c: 3.6 98/06/04 11:56:30 by baud 
add support for LynxOS

rfio/fread.c: 3.8 98/06/04 11:58:06 by baud 
add support for LynxOS

rfio/fseek.c: 1.2 98/06/04 12:03:59 by baud 
add support for LynxOS

rfio/fwrite.c: 3.6 98/06/04 11:59:56 by baud 
add support for LynxOS

rfio/open.c: 3.25 98/06/04 12:10:11 by baud 
add support for LynxOS

rfio/opendir.c: 1.2 98/06/02 17:55:05 by obarring 
Not supported for NT. dirent.h already included in rfio.h

rfio/readdir.c: 1.2 98/06/02 18:00:54 by obarring 
Not supported for NT. dirent.h already included in rfio.h

rfio/rewinddir.c: 1.2 98/06/02 18:01:09 by obarring 
Not supported for NT. dirent.h already included in rfio.h

rfio/rfio_serv.c: 3.45 98/06/05 14:42:58 by baud 
add support for LynxOS

rfio/rfstat.c: 1.6 98/06/04 12:06:26 by baud 
add support for LynxOS

rfio/rfstatfs.c: 1.9 98/06/05 14:58:31 by baud 
add support for LynxOS

rfio/stream.c: 1.15 98/06/04 12:13:38 by baud 
add support for LynxOS

rfio/stream.c: 1.14 98/05/29 15:08:18 by boissat 
Fix for NOMORERFIO under WNT
.

rfio/stream.c: 1.13 98/05/27 08:45:55 by fabien 
Reapplying mods done in version 1.11 since they were missing in 1.12 due to a wrong manipulation of files

rfio/switch_req.c: 1.11 98/06/05 14:39:11 by baud 
add support for LynxOS

rtcopy/Imakefile: 1.41 98/06/04 11:16:40 by baud 
add support for LynxOS

rtcopy/err_messages: 1.30 98/05/25 08:45:54 by baud 
add message "no communication with DIR"

rtcopy/tpclient.c: 1.7 98/06/04 11:26:14 by baud 
add support for LynxOS

rtcopy/tpread.c: 2.78 98/06/04 11:23:27 by baud 
add support for LynxOS

sysreq/Imakefile: 1.18 98/06/04 11:18:21 by baud 
add support for LynxOS

win32/uxid.c: 1.5 98/05/29 15:10:23 by boissat 
Fix for double backslashes under WNT
.

config/Imake.tmpl: 1.11 98/06/04 09:44:21 by baud 
add support for LynxOS

config/Win32.rules: 1.4 98/06/02 11:22:23 by boissat 
Fix for NOMORERFIO filename
.

NEW file: config/lynx.cf(1.1)
config/lynx.cf: 1.1 98/06/04 09:42:16 by baud 
date and time created 98/06/04 09:42:16 by baud

stage/Imakefile: 1.28 98/06/04 11:14:39 by baud 
add support for LynxOS

************************ VERSION 1.10.2.7 *****************************
./README: 1.34 98/05/08 11:17:16 by baud 
1.10.2.7 release

common/getifnam.c: 1.18 98/05/05 14:43:11 by baud 
avoid conflicting declaration of sys_errlist on linux

common/getuser.c: 1.3 98/05/05 14:50:20 by baud 
avoid conflicting declaration of sys_errlist on linux

common/remote.c: 1.10 98/05/07 14:10:37 by baud 
protect against non existing entries in shift.conf

common/remote.c: 1.9 98/05/05 14:53:49 by baud 
avoid conflicting declaration of sys_errlist on linux

common/sendscsicmd.c: 1.11 98/05/05 15:15:40 by baud 
avoid conflicting declaration of sys_errlist on linux

common/serror.c: 1.31 98/05/05 15:20:19 by baud 
avoid conflicting declaration of sys_errlist on linux

common/setnetio.c: 1.7 98/05/05 15:24:31 by baud 
avoid conflicting declaration of sys_errlist on linux

common/socket.c: 1.28 98/05/06 14:48:21 by baud 
avoid conflicting declaration of sys_errlist on linux; move t_recv function so that the static definition comes before use of the function

h/rfio.h: 3.39 98/05/07 15:44:12 by obarring 
Add definitions and request types for opendir(), readdir(),...

msg/infd.c: 1.9 98/05/06 14:06:06 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/msg.c: 1.14 98/05/06 12:01:44 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/msgd.c: 1.11 98/05/06 12:09:21 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/msgdaemon.c: 1.20 98/05/06 15:05:54 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/msgdb.c: 1.6 98/05/06 15:16:37 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/msgr.c: 1.12 98/05/06 12:05:17 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/oper.c: 1.17 98/05/06 15:00:07 by baud 
avoid conflicting declaration of sys_errlist on linux

msg/term.c: 1.13 98/05/07 08:59:46 by baud 
include <termio.h> instead of <sys/termio.h> for linux

msg/tpmstat.c: 1.7 98/05/06 15:20:31 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/Imakefile: 1.51 98/05/07 09:43:41 by baud 
add smcsubr.o to the list of object files for mounttape and unloadtps

tape/dmc.h: 1.2 98/05/06 14:08:14 by obarring 
remove ref. sys_errlist[]. Add some new dmcserv spec. declarations.

tape/dmpfil.c: 1.39 98/05/05 16:16:54 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/dmplbl.c: 1.5 98/05/05 17:12:14 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/mounttape.c: 1.90 98/05/05 17:15:56 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/rbtsubr.c: 1.27 98/05/06 15:11:59 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/smc.c: 1.3 98/05/06 08:43:50 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/smc.h: 1.2 98/05/06 08:45:57 by baud 
cannot have a structure member name "errno", because errno is a macro under linux Redhat 5

tape/smcsubr.c: 1.3 98/05/07 09:38:03 by baud 
fix logging

tape/smcsubr.c: 1.2 98/05/06 08:51:57 by baud 
cannot have a structure member name "errno", because errno is a macro under linux Redhat 5

tape/sonysubr.c: 1.5 98/05/05 17:41:33 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/tpusage.c: 1.9 98/05/05 17:47:45 by baud 
avoid conflicting declaration of sys_errlist on linux

tape/unloadtps.c: 1.27 98/05/06 08:24:58 by baud 
avoid conflicting declaration of sys_errlist on linux

rfio/Imakefile: 1.52 98/05/07 14:03:11 by obarring 
Add opendir,closedir,readdir and rewinddir

rfio/access.c: 1.4 98/05/06 17:09:28 by fabien 
rfio_errno set to 0 for local call

rfio/checkkey.c: 1.3 98/05/06 17:45:29 by fabien 
Linux redhat 5 support

rfio/chown.c: 1.3 98/05/06 17:11:08 by fabien 
rfio_errno set to 0 for local call

rfio/close.c: 3.8 98/05/06 17:12:33 by fabien 
rfio_errno set to 0 for local call

NEW file: rfio/closedir.c(1.1)
rfio/closedir.c: 1.1 98/05/07 13:46:45 by obarring 
First version

rfio/error.c: 3.17 98/05/06 17:46:25 by fabien 
Linux redhat 5 support

rfio/fclose.c: 3.4 98/05/06 17:13:31 by fabien 
rfio_errno set to 0 for local call

rfio/feof.c: 3.5 98/05/06 17:14:39 by fabien 
rfio_errno set to 0 for local call

rfio/fflush.c: 3.2 98/05/06 17:16:19 by fabien 
rfio_errno set to 0 for local call

rfio/fopen.c: 3.6 98/05/06 17:17:40 by fabien 
rfio_errno set to 0 for local call

rfio/fread.c: 3.7 98/05/06 17:18:33 by fabien 
rfio_errno set to 0 for local call

rfio/fstat.c: 3.3 98/05/06 17:19:25 by fabien 
rfio_errno set to 0 for local call

rfio/fwrite.c: 3.5 98/05/06 17:20:12 by fabien 
rfio_errno set to 0 for local call

rfio/lockf.c: 1.2 98/05/06 17:20:56 by fabien 
rfio_errno set to 0 for local call

rfio/lseek.c: 3.6 98/05/06 17:21:35 by fabien 
rfio_errno set to 0 for local call

rfio/lstat.c: 1.4 98/05/06 17:22:19 by fabien 
rfio_errno set to 0 for local call

rfio/mkdir.c: 1.4 98/05/06 17:23:01 by fabien 
rfio_errno set to 0 for local call

rfio/mstat.c: 1.8 98/05/06 17:23:43 by fabien 
rfio_errno set to 0 for local call

rfio/open.c: 3.24 98/05/06 17:25:53 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

NEW file: rfio/opendir.c(1.1)
rfio/opendir.c: 1.1 98/05/07 13:43:45 by obarring 
First version

rfio/pclose.c: 1.6 98/05/06 17:26:59 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

rfio/popen.c: 1.8 98/05/06 17:28:50 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

rfio/pread.c: 1.6 98/05/06 17:29:45 by fabien 
rfio_errno set to 0 for local call

rfio/preseek.c: 3.4 98/05/06 17:06:18 by fabien 
Linux redhat 5 support added

rfio/pwrite.c: 1.2 98/05/06 17:30:25 by fabien 
rfio_errno set to 0 for local call

rfio/read.c: 3.15 98/05/06 17:31:37 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

NEW file: rfio/readdir.c(1.1)
rfio/readdir.c: 1.1 98/05/07 13:45:05 by obarring 
First version

rfio/readlink.c: 1.6 98/05/06 17:32:36 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

rfio/rename.c: 1.4 98/05/06 17:33:34 by fabien 
rfio_errno set to 0 for local call

NEW file: rfio/rewinddir.c(1.1)
rfio/rewinddir.c: 1.1 98/05/07 13:45:54 by obarring 
First version

rfio/rfcp.c: 1.22 98/05/06 17:50:24 by fabien 
Linux redhat 5 support

rfio/rfio_calls.c: 3.55 98/05/07 15:47:43 by obarring 
Add sropendir(), srreaddir(), srrewinddir() and srclosedir()

rfio/rfio_calls.c: 3.54 98/05/06 17:51:10 by fabien 
Linux redhat 5 support

rfio/rfio_fcalls.c: 3.14 98/05/06 17:52:28 by fabien 
Linux redhat 5 support

rfio/rfio_serv.c: 3.44 98/05/07 15:54:35 by obarring 
Add request type and action for opendir(), readdir(), ....

rfio/rfio_serv.c: 3.43 98/05/06 17:53:49 by fabien 
Linux redhat 5 support

rfio/stat.c: 3.8 98/05/06 17:34:19 by fabien 
rfio_errno set to 0 for local call

rfio/statfs.c: 1.4 98/05/06 17:35:00 by fabien 
rfio_errno set to 0 for local call

rfio/stream.c: 1.12 98/05/06 17:35:56 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

rfio/symlink.c: 1.7 98/05/06 17:38:45 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

rfio/write.c: 3.12 98/05/06 17:39:44 by fabien 
rfio_errno set to 0 for local call

rfio/xyclose.c: 3.11 98/05/06 17:40:35 by fabien 
rfio_errno set to 0 for local call

rfio/xyopen.c: 3.19 98/05/06 17:41:52 by fabien 
Linux redhat 5 support
rfio_errno set to 0 for local call

rtcopy/dktotpF.c: 2.37 98/05/06 17:52:36 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/dktotpU.c: 2.33 98/05/06 17:53:32 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/dumptape.c: 1.7 98/05/06 18:04:12 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/err_messages: 1.29 98/05/07 18:21:39 by obarring 
Update for small correction of a msg in v1.30 of ../common/serror.c

rtcopy/err_messages: 1.28 98/05/07 14:50:49 by baud 
add message "LIBRARY_FAILURE"

rtcopy/rtcopyd.c: 2.74 98/05/06 17:55:32 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/rtstat.c: 1.19 98/05/06 17:59:07 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/tpclient.c: 1.6 98/05/06 18:02:48 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/tpio.c: 1.40 98/05/06 17:58:00 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/tpread.c: 2.77 98/05/06 17:54:27 by obarring 
remove extern decl sys_errlist[] for linux

rtcopy/tpsinfod.c: 1.7 98/05/08 11:30:21 by obarring 
linux fix for sys_errlist decl.

rtcopy/tptodkF.c: 2.49 98/05/06 17:49:36 by obarring 
remove extern decl. sys_errlist[] for linux

rtcopy/tptodkU.c: 2.35 98/05/06 17:51:02 by obarring 
remove extern decl sys_errlist[] for linux

tms/tmsdaemon.c: 1.35 98/05/06 08:57:50 by baud 
avoid conflicting declaration of sys_errlist on linux

imake/imake.c: 1.5 98/05/05 16:00:39 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/buildupath.c: 1.13 98/05/06 17:33:41 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/poolmgr.c: 1.26 98/05/06 17:39:31 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/procqry.c: 1.19 98/05/06 17:43:13 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/send2stgd.c: 1.21 98/05/06 16:12:19 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/stagein.c: 1.36 98/05/06 16:28:41 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/stageput.c: 1.16 98/05/06 16:51:11 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/stager.c: 1.32 98/05/06 16:55:26 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/stagestat.c: 1.2 98/05/06 17:00:27 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/stageupdc.c: 1.10 98/05/06 17:03:47 by baud 
avoid conflicting declaration of sys_errlist on linux

stage/stgdaemon.c: 2.29 98/05/06 17:18:26 by baud 
avoid conflicting declaration of sys_errlist on linux

copytape/ctpdaemon.c: 1.20 98/05/05 15:46:58 by baud 
avoid conflicting declaration of sys_errlist on linux

copytape/send2ctpd.c: 1.10 98/05/05 15:40:37 by baud 
avoid conflicting declaration of sys_errlist on linux

copytape/tpcopy.c: 1.18 98/05/05 15:52:33 by baud 
avoid conflicting declaration of sys_errlist on linux

************************ VERSION 1.10.2.6 *****************************
common/sendscsicmd.c: 1.10 98/05/02 09:05:33 by baud 
under Solaris, timeouts are in seconds

common/sendscsicmd.c: 1.9 98/04/06 16:55:53 by baud 
add support for IRIX64 using routine attr_get

tape/Imakefile: 1.50 98/04/03 14:49:59 by fabien 
setuid bits added when installing smc tool

tape/Imakefile: 1.49 98/03/30 09:36:43 by fabien 
Rule to install smc tool added

tape/Imakefile: 1.48 98/03/20 08:54:29 by baud 
add smcsubr.o to the list of objects for mounttape and unloadtps

tape/Imakefile: 1.47 98/03/18 17:11:09 by baud 
correct rules for smc

tape/mounttape.c: 1.89 98/05/02 09:18:20 by baud 
add call to closesmc in cleanup

tape/mounttape.c: 1.88 98/03/23 15:14:46 by baud 
store cfseq instead of fseq in TPPOSIT accounting records

tape/rbtsubr.c: 1.26 98/05/02 09:23:26 by baud 
use api to drive robotic devices through SCSI

tape/smc.c: 1.2 98/05/03 08:47:25 by baud 
set default -V "*" for -q V

tape/tape.h: 1.66 98/03/19 15:37:21 by baud 
add message TP050

rfio/Imakefile: 1.51 98/04/27 17:47:07 by fabien 
Added fseek support

NEW file: rfio/fseek.c(1.1)
rfio/fseek.c: 1.1 98/04/27 17:45:21 by fabien 
date and time created 98/04/27 17:45:21 by fabien

rfio/stream.c: 1.11 98/03/18 16:28:11 by fabien 
Added required include files to be able to use O_* flags

rtcopy/dktotpU.c: 2.32 98/04/01 13:42:38 by obarring 
Add include of rfio.h to get definition of rfio_serror()

rtcopy/rtcopy.shift: 2.115 98/04/29 15:15:55 by obarring 
Correct message for ATTEMPT TO WRITE TO MAPPED VOLUME

rtcopy/rtcopy.shift: 2.114 98/04/28 16:03:11 by obarring 
Don't exit if all retries failed when -E keep. Continue with next file.

rtcopy/rtcopy.shift: 2.113 98/04/27 18:15:34 by fabien 
Added deferred allocation policy

rtcopy/rtcopyerr.h: 1.10 98/04/01 12:42:27 by obarring 
Add RT149 for incompatibel lrecl and F77 lrecl

rtcopy/tpread.c: 2.76 98/04/27 18:12:44 by fabien 
Added deferred allocation policy

rtcopy/tptodkF.c: 2.48 98/04/01 12:43:07 by obarring 
Fix RT149 message for lrecl and F77 lrecl mismatch

rtcopy/tptodkF.c: 2.47 98/04/01 12:25:02 by obarring 
Align offset to 4 bytes boundary for sgi

rtcopy/tptodkU.c: 2.34 98/04/01 13:41:43 by obarring 
Add include to rfio.h to get definition of rfio_serror()

NEW file: win32/getopt.c(1.1)
win32/getopt.c: 1.1 98/04/02 10:55:16 by baud 
date and time created 98/04/02 10:55:16 by baud

stage/procio.c: 1.38 98/04/27 18:06:28 by fabien 
Added deferred allocation policy

stage/procupd.c: 1.19 98/04/27 18:03:45 by fabien 
Added deferred allocation policy

stage/stage.h: 1.35 98/04/27 18:08:25 by fabien 
Added deferred allocation policy

stage/stagein.man: 1.30 98/04/27 12:08:02 by baud 
add option -A

stage/stager.c: 1.31 98/04/27 18:02:07 by fabien 
Added deferred allocation policy

stage/stgdaemon.c: 2.28 98/04/27 17:59:00 by fabien 
Added deferred allocation policy

copytape/tpcopy.c: 1.17 98/04/27 18:17:37 by fabien 
Added deferred allocation policy

copytape/tpcpin.ksh: 1.4 98/04/27 18:19:18 by fabien 
Added deferred allocation policy

************************ VERSION 1.10.2.5 *****************************
./README: 1.33 98/03/18 15:04:06 by baud 
1.10.2.5 release

common/sendscsicmd.c: 1.8 98/03/09 16:23:44 by baud 
Under Solaris, if sense bytes are reported, the ioctl fails with EIO

common/sendscsicmd.c: 1.7 98/02/02 10:50:04 by baud 
make it compile under Digital Unix 4.0d

examples/Imakefile: 1.12 98/03/18 10:53:47 by fabien 
FORCE rule added to rebuild libs when needed

lib/Imakefile: 1.10 98/03/18 10:10:26 by fabien 
Added FORCE rule to rebuild libs when necessary

fhs/Imakefile: 1.11 98/03/18 10:55:00 by fabien 
FORCE rule added to rebuild libs when needed

msg/Imakefile: 1.12 98/03/18 10:47:32 by fabien 
FORCE rule added to rebuild libs when needed

tape/Imakefile: 1.46 98/03/18 14:16:38 by baud 
add smc command (command line interface to SCSI robot)

tape/Imakefile: 1.45 98/03/18 10:50:08 by fabien 
FORCE rule added to rebuild libs when needed

tape/dumplabel.sh: 1.2 98/02/09 21:11:14 by baud 
fix in case TMS is not installed (missing parenthesis) and protect against calling tpmnt with -d if density not set (and no TMS)

tape/dumptape.sh: 1.23 98/02/09 21:13:15 by baud 
fix in case TMS is not installed (missing parenthesis) and protect against calling tpmnt with -d if density not set (and no TMS)

tape/posittape.c: 1.34 98/03/18 10:01:07 by fabien 
Fast positionning support added for IRIX 6.4

tape/skiptape.c: 1.12 98/03/18 09:59:08 by fabien 
Fast positionning support added for IRIX 6.4

NEW file: tape/smc.c(1.1)
tape/smc.c: 1.1 98/03/18 11:53:03 by baud 
date and time created 98/03/18 11:53:03 by baud

NEW file: tape/smc.h(1.1)
tape/smc.h: 1.1 98/03/18 11:51:51 by baud 
date and time created 98/03/18 11:51:51 by baud

NEW file: tape/smc.man(1.1)
tape/smc.man: 1.1 98/03/12 17:51:22 by baud 
date and time created 98/03/12 17:51:22 by baud

NEW file: tape/smcsubr.c(1.1)
tape/smcsubr.c: 1.1 98/03/18 11:53:39 by baud 
date and time created 98/03/18 11:53:39 by baud

tape/tperror.c: 1.20 98/03/18 09:57:21 by fabien 
Tape error processing support added for IRIX 6.4

tape/tperror.c: 1.19 98/02/02 10:55:39 by baud 
set EEI version on Digital Unix 4

rfio/Imakefile: 1.50 98/03/18 14:31:14 by fabien 
rfio_calls.c now compiled with real time support if requested

rfio/Imakefile: 1.49 98/03/18 12:26:33 by fabien 
RFIO daemon real time process support added for DUX 4

rfio/Imakefile: 1.48 98/03/18 10:44:47 by fabien 
FORCE rule added to rebuild libs when needed

rfio/close.c: 3.7 98/02/26 16:05:33 by fabien 
Bug fix for coredump when closing local file with fd > MAXRFD

rfio/open.c: 3.23 98/02/26 16:07:19 by fabien 
Bug fix for potential coredump when opening local file with fd > MAXRFD

rfio/read.c: 3.14 98/02/26 16:06:15 by fabien 
Bug fix for potential coredump when reading local file with fd > MAXRFD

rfio/rfio_calls.c: 3.53 98/03/18 12:32:39 by fabien 
RFIO daemon real time support code (really) added

rfio/rfio_calls.c: 3.52 98/03/18 11:02:37 by fabien 
Real time support added for DUX 4 to improve Ethernet 100BaseTX performance

rfio/rfio_calls.c: 3.51 98/02/17 19:11:05 by fabien 
A bug in the server part of preseek was introduced in a previous version
Probably to avoid compilation problems when doing the port to IRIX 6
The introduced bug affected the preseek operation under Digital Unix, Solaris, Irix 6 and Linux

rfio/stream.c: 1.10 98/02/23 15:53:58 by fabien 
Fix for huge performance problems when DEC 4100 machines are
reading data via HIPPI from SGI machines 

rfio/write.c: 3.11 98/02/26 16:06:48 by fabien 
Bug fix for potential coredump when writing local file with fd > MAXRFD

rtcopy/Imakefile: 1.40 98/03/18 10:51:21 by fabien 
FORCE rule added to rebuild libs when needed

rtcopy/err_messages: 1.27 98/01/27 10:49:56 by baud 
add message "ioctl error : SCSI bus reset"

rtcopy/rtcopy.shift: 2.112 98/02/19 16:03:35 by obarring 
Set cp_time=1 if copy time is less than one seconds.

rtcopy/rtcopy.shift: 2.111 98/02/19 15:51:00 by obarring 
Put copyrc=$? immediatly after the copy (bug introduced in last vers)

rtcopy/rtcopy.shift: 2.110 98/02/17 13:49:10 by obarring 
Use the transfertime rather than service time for transf. bandwidth

rtcopy/rtstat.c: 1.18 98/02/02 13:46:11 by obarring 
Protect against NULL return from getgrgid()

sysreq/Imakefile: 1.17 98/03/18 10:46:07 by fabien 
FORCE rule added to rebuild libs when needed

tms/Imakefile: 1.11 98/03/18 10:48:58 by fabien 
FORCE rule added to rebuild libs when needed

commands/Imakefile: 1.10 98/03/18 10:52:40 by fabien 
FORCE rule added to rebuild libs when needed

win32/syslog.c: 1.4 98/02/22 09:01:36 by baud 
before writing to the registry, it is checked if the corresponding registry entries are already there; added a main program for testing

config/site.def: 1.33 98/03/18 12:21:38 by fabien 
RFIO daemon real time option added

config/site.def: 1.32 98/03/09 12:57:38 by fabien 
Add comment about MeikoCS2 RFIO support

stage/Imakefile: 1.27 98/03/18 10:42:50 by fabien 
FORCE rule added to rebuild libs when needed

stage/Imakefile: 1.26 98/03/16 17:05:49 by baud 
add -lm to link stgdaemon on Unix platforms

stage/poolmgr.c: 1.25 98/03/16 17:36:34 by baud 
add prototype for function sendrep under IRIX6.4, otherwise floating point numbers are printed as zero

stage/procio.c: 1.37 98/03/16 17:41:05 by baud 
add prototype for function sendrep under IRIX6.4, otherwise floating point numbers are printed as zero

stage/procqry.c: 1.18 98/03/16 17:43:30 by baud 
add prototype for function sendrep under IRIX6.4, otherwise floating point numbers are printed as zero

stage/stgdaemon.c: 2.27 98/03/16 17:45:44 by baud 
add prototype for function sendrep under IRIX6.4, otherwise floating point numbers are printed as zero

copytape/Imakefile: 1.22 98/03/18 10:56:14 by fabien 
FORCE rule added to rebuild libs when needed

************************ VERSION 1.10.2.4 *****************************
./README: 1.32 98/01/27 08:34:46 by baud 
1.10.2.4 release

rfio/Imakefile: 1.47 98/01/22 08:56:37 by baud 
do not create SPOOL directory if BuildRfioServer is not defined

************************ VERSION 1.10.2.3 *****************************
./README: 1.31 98/01/21 13:26:41 by baud 
1.10.2.3 release

common/sendscsicmd.c: 1.6 98/01/21 08:44:45 by baud 
process correctly DSRT_SHORT under IRIX

h/Imakefile: 1.9 98/01/21 08:49:06 by baud 
do not echo commands used in rules for clean and clobber

fhs/Imakefile: 1.10 98/01/21 08:48:08 by baud 
do not echo commands used in rules for clean and clobber

tms/Imakefile: 1.10 98/01/21 08:50:45 by baud 
do not echo commands used in rules for clean and clobber

stage/Imakefile: 1.25 98/01/21 08:49:54 by baud 
do not echo commands used in rules for clean and clobber

copytape/Imakefile: 1.21 98/01/21 08:47:08 by baud 
do not echo commands used in rules for clean and clobber

************************ VERSION 1.10.2.2 *****************************
./README: 1.30 98/01/20 11:48:58 by baud 
1.10.2.2 release

examples/Imakefile: 1.11 98/01/13 16:36:05 by baud 
LD is now defined in Imake.tmpl

h/rfio.h: 3.38 98/01/19 12:12:43 by fabien 
MAXRFD constant increased to 1024 for WNT because allocated sockets fds are often higher than 256

msg/Imakefile: 1.11 98/01/20 11:29:55 by baud 
add mpr.lib to link under Windows/NT because of syslog

msg/Imakefile: 1.10 98/01/13 16:37:05 by baud 
LD is now defined in Imake.tmpl

rfio/Imakefile: 1.46 98/01/20 11:10:25 by baud 
add mpr.lib to link under Windows/NT because of syslog

rfio/Imakefile: 1.45 98/01/13 16:38:30 by baud 
LD is now defined in Imake.tmpl

rfio/error.c: 3.16 98/01/14 08:25:37 by baud 
add missing arg in fprintf

rfio/open.c: 3.22 98/01/19 12:09:25 by fabien 
Remote file descriptor table declaration has been simplified

rfio/rfcp.c: 1.21 98/01/19 12:11:05 by fabien 
RFIO version 3 now enabled for Windows NT platform

rfio/rfstatfs.c: 1.8 98/01/13 17:45:13 by baud 
fix previous mod (useless include badly placed)

rfio/stream.c: 1.9 98/01/19 12:10:03 by fabien 
RFIO version 3 bugfix for Windows NT platform

rtcopy/Imakefile: 1.39 98/01/20 11:31:35 by baud 
add mpr.lib to link under Windows/NT because of syslog

rtcopy/Imakefile: 1.38 98/01/13 16:39:21 by baud 
LD is now defined in Imake.tmpl

rtcopy/tptodkF.c: 2.46 98/01/15 08:44:40 by obarring 
Check for ENOSPC on rfio_close().

sysreq/Imakefile: 1.16 98/01/20 11:14:37 by baud 
add mpr.lib to link under Windows/NT because of syslog

sysreq/Imakefile: 1.15 98/01/13 17:08:33 by baud 
LD is now defined in Imake.tmpl

commands/newacct.c: 1.3 98/01/20 11:44:54 by baud 
make it compile under Windows/NT

win32/syslog.c: 1.3 98/01/20 09:43:04 by baud 
include slogmsg.h from current directory

config/Imake.rules: 1.8 98/01/13 15:19:58 by baud 
correct new rules for Unix

config/Imake.tmpl: 1.10 98/01/13 16:33:15 by baud 
define LD as cc if !defined(apollo) && !defined(cray) && !defined(_WIN32)

config/README: 1.2 98/01/20 13:15:58 by baud 
document build commands under Windows/NT

stage/Imakefile: 1.24 98/01/20 11:11:01 by baud 
add mpr.lib to link under Windows/NT because of syslog

copytape/Imakefile: 1.20 98/01/20 10:46:46 by baud 
add mpr.lib to link under Windows/NT because of syslog

copytape/copytape.c: 1.21 98/01/14 09:39:19 by baud 
suppress argument in fprintf to match format CTP03

copytape/ctpdaemon.c: 1.19 98/01/14 09:39:48 by baud 
suppress argument in sendrep to match format CTP03

************************ VERSION 1.10.2.1 *****************************
./README: 1.29 98/01/12 16:41:08 by baud 
1.10.2.0 release

************************ VERSION 1.10.2.0 *****************************
./Imakefile: 1.14 97/11/21 13:17:10 by baud 
null lines are not allowed by nmake

./Imakefile: 1.13 97/11/20 14:06:51 by baud 
add support for Windows/NT

NEW file: ./Makefile.ini.Win32(1.3)
./Makefile.ini.Win32: 1.3 97/11/21 15:09:29 by baud 
suppress useless $@ on imake command line

common/Imakefile: 1.21 98/01/08 14:18:45 by baud 
use new rule MakeDir

common/Imakefile: 1.20 97/12/10 20:24:21 by baud 
use new rules to add support for Windows/NT

common/readc.c: 1.7 97/12/13 08:00:34 by baud 
make it compile under Windows/NT

common/serror.c: 1.30 97/12/18 12:32:57 by hemmer 
Corrected small typo.
cd ../h

examples/Imakefile: 1.10 97/12/11 07:18:04 by baud 
use new rules to add support for Windows/NT

h/Imakefile: 1.8 98/01/08 16:09:38 by baud 
use new rules InstallNonExecFile and MakeDir

h/Imakefile: 1.7 97/12/11 07:26:59 by baud 
use new rules to add support for Windows/NT

h/Imakefile: 1.6 97/11/28 17:14:11 by baud 
install and export also net.h (included by rfio.h)

h/rfio.h: 3.37 97/12/11 14:20:08 by fabien 
Added support for RFIO version 3 reentrant code

lib/Imakefile: 1.9 98/01/08 14:50:24 by baud 
use new rule MakeDir

lib/Imakefile: 1.8 98/01/07 16:08:24 by baud 
use new rule InstallLibrary

lib/Imakefile: 1.7 97/12/10 20:20:50 by baud 
use new rules to add support for Windows/NT

fhs/Imakefile: 1.9 98/01/08 14:40:17 by baud 
use new rule MakeDir

fhs/Imakefile: 1.8 98/01/07 17:44:22 by baud 
use new rule InstallProgram

fhs/Imakefile: 1.7 97/12/11 15:34:38 by baud 
use new rules to add support for Windows/NT

msg/Imakefile: 1.9 98/01/08 15:51:08 by baud 
use new rules InstallProgram and MakeDir

msg/Imakefile: 1.8 97/12/12 09:38:27 by baud 
use new rules to add support for Windows/NT

msg/msg.c: 1.13 97/12/08 11:18:23 by baud 
add support for Windows/NT

msg/msgdaemon.man: 1.2 97/11/28 15:25:02 by baud 
describes mandatory entries in shift.conf

tape/Imakefile: 1.44 98/01/11 13:48:07 by baud 
correct rule for installing tpdump (which is a script, not a program)

tape/Imakefile: 1.43 98/01/08 12:08:29 by baud 
use new rules InstallProgram and MakeDir

tape/Imakefile: 1.42 97/12/12 17:19:04 by baud 
use new rules to add support for Windows/NT

NEW file: tape/dmc.h(1.1)
tape/dmc.h: 1.1 97/10/21 17:28:15 by obarring 
date and time created 97/10/21 17:28:15 by obarring

tape/dmpfil.c: 1.38 97/12/19 08:07:02 by baud 
recognize HDR3, HDR4, EOF3, EOF4

tape/dmplbl.c: 1.4 97/12/19 08:11:23 by baud 
recognize HDR3 and HDR4

tape/rbtsubr.c: 1.25 97/10/22 11:57:20 by obarring 
Initialize rep structure to fix crash of unloadtps in case of dmcserv down.

tape/rbtsubr.c: 1.24 97/10/21 17:45:22 by obarring 
New routines for DEC Media Changer loader (TL820).

tape/rwndtape.c: 1.9 97/12/10 14:31:22 by baud 
add support for Windows/NT

tape/skiptape.c: 1.11 97/12/10 14:55:46 by baud 
add support for Windows/NT

tape/tape.h: 1.65 97/12/14 10:06:44 by baud 
define gid_t and uid_t for Windows/NT

tape/tpdaemon.man: 1.7 97/12/18 16:41:46 by baud 
document limit on length of unit name and mandatory characteristics of device

tape/tperror.c: 1.18 97/12/12 15:33:59 by baud 
add support for Windows/NT

tape/unldtape.c: 1.9 97/12/10 17:07:56 by baud 
add support for Windows/NT

tape/wrttpmrk.c: 1.9 97/12/10 16:51:20 by baud 
add support for Windows/NT

rfio/Imakefile: 1.44 98/01/08 15:00:07 by baud 
use new rule MakeDir

rfio/Imakefile: 1.43 98/01/07 16:06:58 by baud 
use new rules InstallProgram

rfio/Imakefile: 1.42 97/12/12 17:26:44 by baud 
use new rules to add support for Windows/NT

rfio/close.c: 3.6 97/12/11 16:43:20 by fabien 
Bugfix for coredump when local files are used

rfio/close.c: 3.5 97/12/11 14:31:25 by fabien 
Added support for RFIO Version 3 reentrant code

rfio/fio.c: 1.13 97/12/15 08:23:07 by baud 
make it compile under Windows/NT

rfio/lun2fn.c: 3.4 97/10/21 17:49:34 by baud 
suppress unused variables i and pw

rfio/open.c: 3.21 97/12/15 07:57:49 by baud 
suppress useless declaration of host and filename

rfio/open.c: 3.20 97/12/11 16:38:21 by fabien 
Bugfix for coredump when local files are used

rfio/open.c: 3.19 97/12/11 14:26:23 by fabien 
Added support for RFIO version 3 reentrant code

rfio/read.c: 3.13 97/12/11 16:40:27 by fabien 
Bugfix for coredump when local files are used

rfio/read.c: 3.12 97/12/11 14:27:51 by fabien 
Added support for RFIO Version 3 reentrant code

rfio/rfcp.c: 1.20 98/01/09 17:46:37 by baud 
better fix for filesystem almost full

rfio/rfcp.c: 1.19 97/12/11 14:41:23 by fabien 
Added RFIO Version 3 support
Added support for @filename notation (WIN/NT only)
Added support for text/binary mode (WIN/NT only)
Bugfix for successfull partial write when file system full

rfio/rfcp.c: 1.18 97/10/23 11:08:34 by hemmer 
Special treatment for filenames starting with /scratch/...

rfio/rfio_calls.c: 3.50 97/12/11 14:37:08 by fabien 
Performance tuning for SGIs and FDDI for RFIO Version 3

rfio/rfstatfs.c: 1.7 97/12/15 14:35:19 by baud 
add support for Windows/NT

rfio/stream.c: 1.8 97/12/11 14:34:35 by fabien 
Added support for RFIO Version 3 reentrant code
Bugfix for internal error with RFIO V3 close and file system full

rfio/write.c: 3.10 97/12/15 07:48:58 by baud 
add missing # in front of endif

rfio/write.c: 3.9 97/12/11 16:42:11 by fabien 
Bugfix for coredump when local files are used

rfio/write.c: 3.8 97/12/11 14:28:58 by fabien 
Added support for RFIO Version 3 reentrant code

rfio/xyclose.c: 3.10 97/12/13 07:13:34 by baud 
add support for Windows/NT

rfio/xyopen.c: 3.18 97/12/13 07:19:48 by baud 
add support for Windows/NT

rfio/xyread.c: 3.13 97/12/13 07:26:17 by baud 
add support for Windows/NT

rfio/xywrite.c: 3.13 97/12/13 07:32:13 by baud 
add support for Windows/NT

rtcopy/Imakefile: 1.37 98/01/12 08:54:42 by baud 
use new rules InstallProgram and MakeDir

rtcopy/Imakefile: 1.36 97/12/12 17:40:01 by baud 
use new rules to add support for Windows/NT

rtcopy/dktotpF.c: 2.36 97/11/13 14:06:44 by obarring 
Fix concat. of files so that all but last block have same size.

rtcopy/err_messages: 1.26 97/12/17 08:02:34 by baud 
add messages "READ ERROR: Command timeout" and "cannot fork: too many processes"

rtcopy/rtcopy.shift: 2.109 97/12/01 15:50:49 by obarring 
Support new parameter F,-f77 to -F option for f77 rec. to fixed conv.

rtcopy/tpread.man: 1.22 97/12/12 08:49:08 by obarring 
Fix spelling errors.

rtcopy/tpread.man: 1.21 97/12/04 16:13:51 by obarring 
Correct error: -T option is not valid for tpwrite.

rtcopy/tpread.man: 1.20 97/12/04 16:11:28 by obarring 
Add description for -F F,-f77, -n, -o and -T options.

rtcopy/tptodkF.c: 2.45 97/12/01 15:49:01 by obarring 
Support conversion of F77 records to fixed format.

scripts/Imakefile: 1.7 97/12/11 07:28:23 by baud 
use new rules to add support for Windows/NT

sysreq/Imakefile: 1.14 98/01/08 15:06:35 by baud 
use new rules InstallProgram and MakeDir

sysreq/Imakefile: 1.13 97/12/12 07:34:06 by baud 
use new rules to add support for Windows/NT

sysreq/sysreqf.c: 1.25 97/12/13 13:36:07 by baud 
add support for Windows/NT

tms/Imakefile: 1.9 98/01/08 12:28:07 by baud 
use new rules InstallProgram and MakeDir

tms/Imakefile: 1.8 97/12/11 15:40:08 by baud 
use new rules to add support for Windows/NT

commands/Imakefile: 1.9 98/01/08 14:14:58 by baud 
use new rule MakeDir

commands/Imakefile: 1.8 98/01/07 16:20:05 by baud 
use new rule InstallProgram

commands/Imakefile: 1.7 97/12/12 09:13:19 by baud 
use new rules to add support for Windows/NT

imake/Makefile.ini: 1.2 97/11/05 14:36:37 by baud 
add support for Windows/NT

NEW file: imake/Makefile.ini.Win32(1.1)
imake/Makefile.ini.Win32: 1.1 97/11/21 14:08:21 by baud 
date and time created 97/11/21 14:08:21 by baud

imake/imake.c: 1.4 97/11/05 12:05:40 by baud 
fix few problems under Windows/NT; specially make CleanCppOutput work

imake/imake.c: 1.3 97/10/31 11:43:55 by baud 
add support for Windows/NT

imake/imakemdep.h: 1.8 97/11/05 12:03:20 by baud 
suppress useless test under Windows/NT

imake/imakemdep.h: 1.7 97/11/05 11:45:59 by baud 
must define FIXUP_CPP_WHITESPACE under Windows/NT because the precompiler suppress tabs

imake/imakemdep.h: 1.6 97/10/31 11:45:12 by baud 
add support for Windows/NT

NEW file: win32/cmdf2argv.c(1.1)
win32/cmdf2argv.c: 1.1 97/12/05 15:27:07 by baud 
date and time created 97/12/05 15:27:07 by baud

win32/slogmsg.h: 1.2 97/11/14 10:02:41 by baud 
change SYSLOG_01 to SLG_01...

win32/syslog.c: 1.2 97/11/14 10:19:47 by baud 
initialize bufsize

win32/syslog.h: 1.2 97/11/14 10:07:11 by baud 
add check on __cplusplus

config/Imake.rules: 1.7 98/01/08 15:15:35 by baud 
add new rules to install programs and libraries and to create directories

config/Imake.rules: 1.6 97/12/17 21:12:18 by baud 
add new default rules (overriden by Win32.rules for Windows/NT)

config/Imake.tmpl: 1.9 97/12/19 08:52:02 by baud 
define CP and LN for Unix platforms

config/Imake.tmpl: 1.8 97/12/17 20:21:38 by baud 
add default definition for CurDir, FilesToClean and Osuf

config/Library.tmpl: 1.11 97/12/06 09:56:33 by baud 
use DepLibraryTargetName rule to build library names

config/Project.tmpl: 1.12 97/12/06 09:59:33 by baud 
set variables in column 1 because of nmake under Windows/NT

config/Win32.cf: 1.3 97/12/08 15:14:40 by baud 
define CP

config/Win32.cf: 1.2 97/12/06 10:04:07 by baud 
define more command names, FilesToClean and Osuf

NEW file: config/Win32.rules(1.3)
config/Win32.rules: 1.3 98/01/08 15:22:05 by baud 
add new rules to install programs and libraries and to create directories

config/site.def: 1.31 98/01/08 14:05:14 by baud 
define InstallBinDir, InstallIncludeDir and InstallLibDir for Windows/NT

config/site.def: 1.30 97/12/06 10:20:32 by baud 
define default ShiftConfigFile and OperatorDir for Windows/NT

stage/Imakefile: 1.23 98/01/12 08:37:21 by baud 
use new rules InstallProgram and MakeDir

stage/Imakefile: 1.22 97/12/12 08:29:26 by baud 
use new rules to add support for Windows/NT

stage/procio.c: 1.36 97/12/03 11:33:53 by baud 
accept record format "F,-f77" to remove Fortran control words from a tape file

stage/procio.c: 1.35 97/10/20 08:58:47 by baud 
initialize wqp to avoid stgdaemon crash in case of invalid user

stage/stagein.man: 1.29 97/12/12 08:02:12 by baud 
add option -F F,-f77

stage/stager.c: 1.30 97/12/03 11:34:40 by baud 
accept record format "F,-f77" to remove Fortran control words from a tape file

copytape/Imakefile: 1.19 98/01/11 13:35:27 by baud 
use new rule MakeDir

copytape/Imakefile: 1.18 98/01/07 17:31:27 by baud 
use new rule InstallProgram

copytape/Imakefile: 1.17 97/12/11 15:21:20 by baud 
use new rules to add support for Windos/NT

************************ VERSION 1.10.1.10 *****************************
./Imakefile: 1.12 97/10/06 09:30:40 by baud 
add subdirectory tape to list EXPORTSUBDIRS because of tpusage

./README: 1.28 97/10/08 09:40:06 by baud 
1.10.1.10 release

rfio/rfio_calls.c: 3.49 97/10/07 22:37:14 by fabien 
Some operating systems may return a file descriptor of 0 (HPUX)
Two conditionnal tests modified accordingly : RFIO client part generated
a core dump in this case (client was also fixed to avoid that)

rfio/stream.c: 1.7 97/10/07 22:34:00 by fabien 
Added error test after calling data_rfio_connect
Also added a TRACE sentence to prove that select says data is available on
a descriptor but read returns 0 byte available afterwards.

rtcopy/rtcopy.shift: 2.108 97/10/06 12:57:06 by obarring 
Reassign tmvsn to new vid if it is a mapped volume

************************ VERSION 1.10.1.9 *****************************
rtcopy/tpread.c: 2.75 97/10/01 20:24:35 by obarring 
Change back declaration of chkvidmap. Some compilers didn't like it.

************************ VERSION 1.10.1.8 *****************************
rtcopy/tpread.c: 2.74 97/10/01 14:44:29 by obarring 
Fix declaration of chkvidmap.

************************ VERSION 1.10.1.7 *****************************
./README: 1.27 97/10/01 11:48:57 by baud 
1.10.1.7 release

h/sacct.h: 1.9 97/09/26 16:39:17 by baud 
add support for Windows/NT

fhs/Imakefile: 1.6 97/09/29 14:16:32 by baud 
do not use lorder under IRIX 6 (it does not work)

tape/Imakefile: 1.41 97/09/29 14:11:49 by baud 
do not use lorder under IRIX 6 (it does not work)

tape/dmpfil.c: 1.37 97/09/23 08:44:14 by baud 
process correctly tapes having only a prelabel and a single tapemark

tape/tpusage.c: 1.8 97/09/23 16:58:18 by obarring 
Protect against rfio_read failures. Protect against getgrgid==NULL.

rfio/rfio_calls.c: 3.48 97/09/24 19:41:54 by fabien 
RFIO V3 fix. Deadlock in close_v3 when writing to disk when filesize is
a multiple of the writing disk buffer size (by defauft 2 MB)

rfio/rfio_calls.c: 3.47 97/09/22 21:04:02 by fabien 
Missing # before endif

rfio/rfio_calls.c: 3.46 97/09/22 20:56:03 by fabien 
RFIO V3 fix : data corruption problem when writing to disk
because iobuffer_p was not updated in srwrite_v3

rfio/rfio_calls.c: 3.45 97/09/22 09:19:39 by fabien 
RFIO version 3 fixes : deadlock when file system full and truncation of data (last disk buffer sometimes not flushed to disk)

rfio/rfio_serv.c: 3.42 97/09/18 11:01:02 by hemmer 
re-usable rfio port

rfio/rfstat.c: 1.5 97/10/01 11:42:16 by baud 
add support for Windows/NT

rfio/rfstatfs.c: 1.6 97/09/24 16:38:28 by baud 
complete support for linux

rfio/xyread.c: 3.12 97/09/30 08:56:24 by baud 
fix TRACE messages

rfio/xywrite.c: 3.12 97/09/30 08:59:21 by baud 
fix TRACE messages

rtcopy/err_messages: 1.25 97/09/22 09:18:59 by baud 
add messages "READ ERROR: Cannot Establish Connection" and "fork() failed: Operation would block"

rtcopy/rtstat.c: 1.17 97/09/26 15:03:46 by baud 
correct declaration of day and month

rtcopy/tpclient.c: 1.5 97/09/26 16:32:06 by obarring 
Fix declaration of ***hosts. Protect bestc.

rtcopy/tpio.c: 1.39 97/09/29 09:16:40 by obarring 
Make sure terror and twrite always have defined return values.

rtcopy/tpread.c: 2.73 97/09/26 16:25:53 by obarring 
Fix two declarations errors (***hosts and chkvidmap). Protect bestc.

rtcopy/tptodkF.c: 2.44 97/10/01 11:57:35 by obarring 
Correct "last_errno = ENODEV" to "last_errno == ENODEV" in tests.

tms/Imakefile: 1.7 97/09/29 14:13:33 by baud 
do not use lorder under IRIX 6 (it does not work)

imake/imake.c: 1.2 97/09/29 08:49:54 by baud 
make it compile under IRIX 6.4.1

config/sgi.cf: 1.5 97/09/29 15:13:15 by baud 
add support for IRIX6.4

stage/procio.c: 1.34 97/09/30 17:09:51 by baud 
fix stagewrt -qnx processing

copytape/ctpdaemon.c: 1.18 97/09/24 15:49:43 by baud 
-l blp is only valid for input tape

copytape/tpcopy.c: 1.16 97/09/25 08:26:13 by baud 
do not put options -d, -g and -v on stagein/stagewrt requests if compiled with TMS (because of vid mapping); when TMS is defined, pass -l option value to stagein only if blp

************************ VERSION 1.10.1.6 *****************************
./README: 1.26 97/09/14 08:48:39 by baud 
1.10.1.6 release

common/Imakefile: 1.19 97/09/08 17:05:50 by baud 
add Windows/NT specific routines

common/getacctent.h: 1.3 97/09/09 08:34:33 by baud 
Under Window/NT set the default ACCT_FILE to "%SystemRoot%\\system32\\drivers\\etc\\account"

tape/tpmnt.man: 1.27 97/09/08 09:43:34 by baud 
for non Redwood drives, if the blocksize is not specified but lrecl is, blksize is set to lrecl

rtcopy/rtcopy.shift: 2.107 97/09/09 15:13:06 by obarring 
Add lblinfo to stageupdc for MNYPARY (too many parity errors) exit.

rtcopy/rtcopy.shift: 2.106 97/09/04 11:08:01 by obarring 
Fix default blksiz in case lrecl is specified and >32K

rtcopy/tpread.man: 1.19 97/09/14 08:44:34 by baud 
document default blocksizes

NEW file: win32/grp.h(1.1)
win32/grp.h: 1.1 97/07/04 15:15:37 by baud 
date and time created 97/07/04 15:15:37 by baud

NEW file: win32/pwd.h(1.1)
win32/pwd.h: 1.1 97/08/14 15:12:34 by baud 
date and time created 97/08/14 15:12:34 by baud

NEW file: win32/sleep.c(1.1)
win32/sleep.c: 1.1 97/08/07 16:57:36 by baud 
date and time created 97/08/07 16:57:36 by baud

NEW file: win32/slogmsg.h(1.1)
win32/slogmsg.h: 1.1 97/08/14 15:06:51 by baud 
date and time created 97/08/14 15:06:51 by baud

NEW file: win32/syslog.c(1.1)
win32/syslog.c: 1.1 97/08/14 15:05:41 by baud 
date and time created 97/08/14 15:05:41 by baud

NEW file: win32/syslog.h(1.1)
win32/syslog.h: 1.1 97/08/14 15:06:17 by baud 
date and time created 97/08/14 15:06:17 by baud

NEW file: win32/uxid.c(1.4)
win32/uxid.c: 1.4 97/09/09 08:40:44 by baud 
define default UXGRPFILE as "%SystemRoot%\\system32\\drivers\\etc\\group" and UXPWDFILE as "%SystemRoot%\\system32\\drivers\\etc\\passwd"

config/Imake.tmpl: 1.7 97/09/12 16:55:00 by baud 
add mods for Windows/NT

NEW file: config/Win32.cf(1.1)
config/Win32.cf: 1.1 97/09/12 16:55:23 by baud 
date and time created 97/09/12 16:55:23 by baud

stage/procalloc.c: 1.8 97/09/05 14:43:39 by baud 
make it compile under Windows/NT

stage/procalloc.c: 1.7 97/09/05 12:01:01 by baud 
use the centralized routine req2argv to allocate argv, build argv and log the request

stage/procclr.c: 1.9 97/09/05 14:50:21 by baud 
make it compile under Windows/NT

stage/procclr.c: 1.8 97/09/05 13:32:40 by baud 
use the centralized routine req2argv to allocate argv, build argv and log the request

stage/procio.c: 1.33 97/09/05 14:57:37 by baud 
make it compile under Windows/NT

stage/procio.c: 1.32 97/09/05 13:39:13 by baud 
use the centralized routine req2argv to allocate argv, build argv and log the request

stage/procqry.c: 1.17 97/09/05 15:35:54 by baud 
use the centralized routine req2argv to allocate argv, build argv and log the request

stage/procupd.c: 1.18 97/09/05 15:04:47 by baud 
make it compile under Windows/NT

stage/procupd.c: 1.17 97/09/05 13:58:46 by baud 
use the centralized routine req2argv to allocate argv, build argv and log the request

stage/stagecat.man: 1.7 97/09/14 07:59:41 by baud 
no default blocksize

stage/stagein.man: 1.28 97/09/14 07:29:58 by baud 
document default blocksizes

stage/stageout.man: 1.8 97/09/14 07:52:24 by baud 
document default blocksizes

stage/stagewrt.man: 1.8 97/09/14 07:56:20 by baud 
document default blocksizes

stage/stgdaemon.c: 2.26 97/09/05 11:53:27 by baud 
add a centralized routine req2argv to allocate argv, build argv and log the request

copytape/copytape.man: 1.17 97/09/14 07:26:33 by baud 
document default blocksizes

************************ VERSION 1.10.1.5 *****************************
./README: 1.25 97/09/03 09:30:30 by baud 
1.10.1.5 release

rtcopy/err_messages: 1.24 97/09/02 08:26:09 by baud 
add message "READ ERROR: Timeout"

rtcopy/tpio.c: 1.38 97/09/03 14:29:03 by obarring 
Add EMEDIA for IBM on write. Fix exit codes on EIO on write.

rtcopy/tpio.c: 1.37 97/09/02 07:10:13 by baud 
add processing of EMEDIA in read mode for AIX platforms

sysreq/netreq.c: 1.30 97/09/03 14:56:37 by obarring 
check h_errno (=WSAGetLastError()) in _WIN32 socket routine calls.

sysreq/sysreq.c: 1.19 97/09/03 15:33:12 by obarring 
Don't call sperror for Windows socket error.

config/Library.tmpl: 1.10 97/09/03 07:40:14 by baud 
split BuildRfio into BuildRfioClient and BuildRfioServer

config/Project.tmpl: 1.11 97/09/03 08:01:39 by baud 
split BuildRfio into BuildRfioClient and BuildRfioServer

NEW file: config/README(1.1)
config/README: 1.1 97/09/01 08:09:27 by baud 
date and time created 97/09/01 08:09:27 by baud

stage/procio.c: 1.31 97/09/03 16:05:04 by baud 
more checks on -A and -c options

stage/send2stgd.c: 1.20 97/09/02 09:36:14 by baud 
process correctly the Windows socket errors

stage/stage.h: 1.34 97/09/02 09:33:39 by baud 
add message STG53 for Windows socket errors

copytape/copytape.c: 1.20 97/09/03 09:21:59 by baud 
message CTP30 renamed to CTP31

copytape/copytape.h: 1.15 97/09/03 08:44:31 by baud 
rename CTP30 to CTP31 and add message CTP30 for Windows socket errors

copytape/send2ctpd.c: 1.9 97/09/03 09:23:32 by baud 
process correctly the Windows socket errors

************************ VERSION 1.10.1.4 *****************************
./README: 1.24 97/08/27 17:26:48 by baud 
1.10.1.4 release

common/log.c: 1.26 97/08/27 17:22:17 by baud 
use flag AIX42

h/rfio.h: 3.36 97/08/27 17:23:13 by baud 
use flag AIX42

tape/mounttape.c: 1.87 97/08/29 11:36:49 by baud 
set correctly the default blocksize

rfio/rfcp.c: 1.17 97/08/29 15:20:27 by baud 
use rfio_close instead close

config/aix.cf: 1.3 97/08/27 17:24:48 by baud 
define flag AIX42

stage/procio.c: 1.30 97/08/29 16:13:11 by baud 
accept options -A and -c

stage/stagein.c: 1.35 97/08/29 07:59:08 by baud 
add options -A and -c

************************ VERSION 1.10.1.3 *****************************
./README: 1.23 97/08/26 11:36:39 by baud 
1.10.1.3 release

common/getacctent.c: 1.2 97/08/19 08:35:18 by baud 
under Windows/NT if the ACCT_FILE name starts with %SystemRoot%, take SystemRoot from the environment

common/getacctent.h: 1.2 97/08/08 17:47:35 by baud 
allow for an outside definition of ACCT_FILE to overwrite the value defined here

common/getconfent.c: 1.11 97/08/19 08:57:47 by baud 
under Windows/NT if the PATH_CONFIG name starts with %SystemRoot%, take SystemRoot from the environment

common/getifnam.c: 1.17 97/08/11 16:10:55 by baud 
for the moment it's a dummy routine under Windows/NT

common/log.c: 1.25 97/08/22 10:57:16 by baud 
suppress compilation error under AIX4.2

common/remote.c: 1.8 97/08/22 10:52:19 by baud 
suppress compilation error under AIX4.2

common/remote.c: 1.7 97/08/11 16:12:48 by baud 
for the moment it's a dummy routine under Windows/NT

common/serror.c: 1.29 97/08/07 13:18:05 by baud 
add message "Protocol not supported"

common/socket.c: 1.27 97/08/07 10:39:35 by baud 
complete support for Windows/NT

common/solveln.c: 1.4 97/08/07 17:37:18 by baud 
symbolic links are not supported under Windows/NT

h/rfio.h: 3.35 97/08/26 09:49:52 by baud 
iovec is system defined under AIX 4.2 because <sys/socket.h> includes <sys/uio.h>

h/serrno.h: 1.19 97/08/07 13:13:10 by baud 
define SEPROTONOTSUP   1031            /* RFIO protocol not supported  */

fhs/checkjobdied.c: 1.10 97/08/22 09:30:44 by baud 
declare routine seek_and_read as static to avoid loader error messages when linking tpdaemon under AIX4.2

fhs/findpgrp.c: 1.9 97/08/22 09:33:27 by baud 
declare routine seek_and_read as static to avoid loader error messages when linking tpdaemon under AIX4.2

tape/checkjobdied.c: 1.15 97/08/22 08:29:02 by baud 
declare routine seek_and_read as static to avoid loader error messages when linking tpdaemon under AIX4.2

tape/findpgrp.c: 1.17 97/08/22 08:28:12 by baud 
declare routine seek_and_read as static to avoid loader error messages when linking tpdaemon under AIX4.2

tape/posittape.c: 1.33 97/08/26 06:58:43 by baud 
always rewind the tape when same file requested twice in write mode (probably a retry)

tape/sonysubr.c: 1.4 97/08/06 11:55:16 by baud 
increase unload timeout to 5 minutes

tape/usrlbl.c: 1.19 97/08/01 14:53:20 by baud 
fix multivolume feature

rfio/Imakefile: 1.41 97/08/18 11:57:18 by baud 
split BuildRfio into BuildRfioClient and BuildRfioServer

rfio/Imakefile: 1.40 97/08/08 16:32:46 by baud 
rfstat depends on librfio

rfio/alrm.c: 1.4 97/08/11 13:57:51 by baud 
suppress warning message at compilation time under Windows/NT

rfio/checkkey.c: 1.2 97/08/11 13:54:09 by baud 
make it compile under Windows/NT

rfio/error.c: 3.15 97/08/08 15:13:00 by baud 
define a local rfio_buf to avoid unnecessary linking to open.c...

rfio/fopen.c: 3.5 97/08/08 17:24:46 by baud 
suppress warnings at compilation time under Windows/NT (unused variables)

rfio/misc.c: 3.2 97/08/08 17:32:16 by baud 
suppress warning message at compilation time under Windows/NT

rfio/mstat.c: 1.7 97/08/08 15:18:32 by baud 
make it compile under Windows/NT

rfio/open.c: 3.18 97/08/08 15:22:38 by baud 
make it compile under Windows/NT

rfio/pclose.c: 1.5 97/08/11 11:06:58 by baud 
define WEXITSTATUS under Windows/NT

rfio/popen.c: 1.7 97/08/11 09:34:03 by baud 
make it compile under Windows/NT

rfio/preseek.c: 3.3 97/08/11 08:47:59 by baud 
suppress declaration of unused variable

rfio/readlink.c: 1.5 97/08/13 16:52:07 by baud 
process correctly the error in case the remote host does not support symbolic links

rfio/rename.c: 1.3 97/08/08 15:55:07 by baud 
make it compile under Windows/NT

rfio/rfcp.c: 1.16 97/08/12 07:40:38 by baud 
add calls to WSAStartup and WSACleanup for Windows NT

rfio/rfcp.c: 1.15 97/08/08 15:25:03 by baud 
make it compile under Windows/NT

rfio/stream.c: 1.6 97/08/26 07:08:44 by baud 
replace fprintf by TRACE

rfio/stream.c: 1.5 97/08/25 09:34:25 by baud 
fix typo in error message

rfio/stream.c: 1.4 97/08/08 15:44:47 by baud 
make it compile under Windows/NT

rfio/stream.c: 1.3 97/08/01 15:35:11 by baud 
suppress warning at compilation time

rfio/switch_req.c: 1.10 97/08/13 15:07:12 by baud 
make it compile under Windows/NT

rfio/symlink.c: 1.6 97/08/13 16:49:00 by baud 
process correctly the error in case the remote host does not support symbolic links

rtcopy/err_messages: 1.23 97/08/25 10:26:49 by baud 
add messages "ATTEMPT TO WRITE TO MAPPED VOLUME", "ioctl error : CCB request aborted by the host", "READ ERROR: Medium error"

rtcopy/err_messages: 1.22 97/08/18 09:45:54 by baud 
add messages "read error : Cannot Establish Connection", "door open 1"

rtcopy/rtstat.c: 1.16 97/08/14 18:09:10 by baud 
fix processing of negative value given for option -s

rtcopy/tpread.c: 2.72 97/08/26 11:22:46 by obarring 
Continue with next server if getsockopt returns -1 rather than exit.

sysreq/netreq.c: 1.29 97/08/07 10:02:09 by baud 
complete support for Windows/NT

sysreq/sysreq.c: 1.18 97/08/20 08:27:49 by baud 
use cuserid instead of getpwuid under Windows/NT so that it does not require the unix passwd file

sysreq/sysreq.c: 1.17 97/08/07 10:18:50 by baud 
add support for Windows/NT

sysreq/sysreqc.c: 1.13 97/08/20 08:01:26 by baud 
add support for Windows/NT

tms/checkjobdied.c: 1.14 97/08/22 09:28:01 by baud 
declare routine seek_and_read as static to avoid loader error messages when linking tpdaemon under AIX4.2

tms/findpgrp.c: 1.10 97/08/22 09:28:23 by baud 
declare routine seek_and_read as static to avoid loader error messages when linking tpdaemon under AIX4.2

config/site.def: 1.29 97/08/18 11:59:20 by baud 
split BuildRfio into BuildRfioClient and BuildRfioServer

stage/buildupath.c: 1.12 97/08/13 08:16:50 by baud 
allow stagewrt to work under Windows/NT

stage/procalloc.c: 1.6 97/08/14 07:53:15 by baud 
procget was using an uninitialized variable

stage/procio.c: 1.29 97/08/05 08:04:14 by baud 
correct check on uid to avoid stgdaemon crash in case of unknown uid

stage/send2stgd.c: 1.19 97/08/20 07:09:14 by baud 
report error LNKNSUP (symbolic links not supported on NT)

stage/stage.h: 1.33 97/08/19 16:00:07 by baud 
define code LNKNSUP (symbolic links not supported on NT) and add message STG52

stage/stagealloc.c: 1.8 97/08/19 17:26:44 by baud 
add support for Windows/NT; add checks on value returned by getpw... and getgr... routines to avoid client crash; process error LNKNSUP (symbolic links not supported on NT)

stage/stageclr.c: 1.19 97/08/19 11:10:24 by baud 
add checks on value returned by getpw... and getgr... routines to avoid client crash

stage/stageget.c: 1.4 97/08/19 16:24:17 by baud 
add support for Windows/NT; add checks on value returned by getpw... and getgr... routines to avoid client crash; process error LNKNSUP (symbolic links not supported on NT)

stage/stagein.c: 1.34 97/08/19 15:55:17 by baud 
add checks on value returned by getpw... and getgr... routines to avoid client crash; process error LNKNSUP (symbolic links not supported on NT)

stage/stagein.c: 1.33 97/08/11 16:16:11 by baud 
under Windows/NT, uses the backslash instead of slash to parse the command name

stage/stageput.c: 1.15 97/08/19 11:37:07 by baud 
add checks on value returned by getpw... and getgr... routines to avoid client crash

stage/stageqry.c: 1.13 97/08/19 11:28:42 by baud 
add checks on value returned by getpw... and getgr... routines to avoid client crash

stage/stageupdc.c: 1.9 97/08/19 17:33:29 by baud 
dd support for Windows/NT; add checks on value returned by getpw... and getgr... routines to avoid client crash

copytape/copytape.c: 1.19 97/08/20 13:20:10 by baud 
add checks on value returned by getpw... and getgr... routines to avoid client crash

copytape/copytape.c: 1.18 97/08/18 08:09:33 by baud 
add support for Windows/NT

copytape/copytape.h: 1.14 97/08/19 11:51:31 by baud 
add messages CTP29 and CTP30

copytape/copytape.h: 1.13 97/08/18 08:10:34 by baud 
add support for Windows/NT

copytape/send2ctpd.c: 1.8 97/08/20 13:38:55 by baud 
avoid client crash when "copytape" not defined in /etc/services

copytape/send2ctpd.c: 1.7 97/08/18 08:11:32 by baud 
add support for Windows/NT

copytape/send2ctpd.c: 1.6 97/08/01 16:00:45 by baud 
suppress warning message at compilation time

copytape/tpcopy.c: 1.15 97/08/25 10:53:47 by baud 
if vid is not specified, take the vsn as vid; avoid crash when number of output files incorrectly specified in split mode

************************ VERSION 1.10.1.2 *****************************
common/getuser.c: 1.2 97/08/01 09:40:57 by baud 
include errno.h instead of sys/errno.h because of Windows/NT

common/setnetio.c: 1.6 97/08/01 09:57:15 by baud 
make it compile under Windows/NT

common/socket.c: 1.26 97/08/01 08:12:48 by baud 
suppress warning when compiling under Windows/NT

tape/tpusage.c: 1.7 97/08/01 08:35:13 by baud 
fix problem under Sun/OS

sysreq/xdr.c: 1.19 97/08/01 08:52:27 by baud 
include stdlib.h instead of malloc.h to define malloc

************************ VERSION 1.10.1.1 *****************************
rfio/rfio_calls.c: 3.44 97/07/31 14:30:33 by baud 
fix compilation errors introduced with rfio version 3

rfio/stream.c: 1.2 97/07/31 14:29:05 by baud 
fix compilation errors on several platforms

************************ VERSION 1.10.1.0 *****************************
introduce rfio version 3
./README: 1.22 97/07/31 08:59:32 by baud 
1.10.1.0 release

h/rfio.h: 3.34 97/07/30 16:15:17 by fabien 
Added symbols for version 3 streaming routines
.

tape/rbtsubr.c: 1.23 97/07/30 11:22:52 by baud 
add processing of INVALID_MEDIA_TYPE and MISPLACED_TAPE for STK

rfio/Imakefile: 1.39 97/07/30 16:54:53 by fabien 
Added support for version 3 streaming protocol + CS2

rfio/close.c: 3.4 97/07/30 16:43:31 by fabien 
Added support for version 3 streaming routines

rfio/open.c: 3.17 97/07/30 16:43:08 by fabien 
Added support for version 3 streaming routines

rfio/read.c: 3.11 97/07/30 16:47:56 by fabien 
Added support for version 3 streaming routines

rfio/rfio_calls.c: 3.43 97/07/30 16:33:03 by fabien 
Added support for version 3 streaming routines

rfio/rfio_serv.c: 3.41 97/07/30 16:32:30 by fabien 
Added support for version 3 streaming routines

NEW file: rfio/stream.c(1.1)
rfio/stream.c: 1.1 97/07/30 16:51:24 by fabien 
date and time created 97/07/30 16:51:24 by fabien

rfio/write.c: 3.7 97/07/30 16:47:35 by fabien 
Added support for version 3 streaming routines

rtcopy/dktotpF.c: 2.35 97/07/30 17:07:44 by fabien 
Added support for version 3 streaming RFIO protocol

rtcopy/err_messages: 1.21 97/07/30 14:26:24 by baud 
add messages "ioctl error : No such device or address", "write error : Medium error", "INCOMPATIBLE_MEDIA_TYPE", "VOLUME_NOT_IN_LIBRARY", "write protected"

rtcopy/tpio.c: 1.36 97/07/30 13:34:36 by baud 
return USERR in case of Medium error on Sony tapes in raw mode

rtcopy/tptodkF.c: 2.43 97/07/30 17:07:12 by fabien 
Added support for version 3 streaming RFIO protocol

************************ VERSION 1.9.2.0 *****************************
./README: 1.21 97/07/07 14:31:33 by baud 
1.9.2.0 release

common/getacct.c: 1.10 97/07/04 14:50:22 by baud 
make it compile under Windows NT

common/socket.c: 1.25 97/07/04 15:10:41 by baud 
make it compile under Windows NT

common/socket.c: 1.24 97/06/27 09:32:03 by baud 
suppress useless declaration of malloc

h/log.h: 1.6 97/07/07 10:07:10 by baud 
add support for Windows/NT

h/osdep.h: 1.5 97/07/04 15:24:35 by baud 
add support for Windows NT

h/rfcntl.h: 1.9 97/06/30 17:43:50 by baud 
add support for Windows/NT

h/rfio.h: 3.33 97/07/07 09:53:03 by baud 
add support for Windows/NT

fhs/checkjobdied.c: 1.9 97/06/20 14:31:29 by baud 
correct code for HPUX10: keep versions in tape and fhs directories in sync

tape/checkjobdied.c: 1.14 97/06/20 14:03:10 by baud 
correct code for HPUX10: log entries were incorrect because ENTRY was not executed

tape/mounttape.c: 1.86 97/07/02 07:13:02 by baud 
allow nth file to overflow to another tape (until now, only the first file could span)

tape/mounttape.c: 1.85 97/06/11 11:27:07 by baud 
closefbs needs a loader parameter for error messages

tape/posittape.c: 1.32 97/07/02 07:15:00 by baud 
allow nth file to overflow to another tape (until now, only the first file could span)

tape/rbtsubr.c: 1.22 97/06/13 08:33:08 by baud 
add processing of STATUS_INVALID_MEDIA_TYPE

tape/rbtsubr.c: 1.21 97/06/11 11:44:13 by baud 
suppress compilation errors when DMSCAPI is defined

tape/usrlbl.c: 1.18 97/07/02 07:58:29 by baud 
allow nth file to overflow to another tape (until now, only the first file could span)

tape/usrlbl.man: 1.3 97/07/04 16:40:52 by baud 
document single/double tapemark depending on device type; document rewrite of tapemark only for Exabytes in 8200 mode

rfio/connect.c: 3.13 97/07/07 10:12:40 by baud 
make it compile under Windows/NT

rfio/error.c: 3.14 97/07/03 07:18:20 by baud 
define type of external function rfio_lasthost()

rfio/parse.c: 3.17 97/07/03 07:21:36 by baud 
make it compile under Windows NT

rfio/readlink.c: 1.4 97/07/07 08:16:49 by baud 
symbolic links don't exist under Windows NT

rfio/symlink.c: 1.5 97/07/03 07:31:19 by baud 
symbolic links don't exist under Windows NT

rtcopy/err_messages: 1.20 97/06/30 16:40:28 by baud 
add message "open error : Cannot Establish Connection"

rtcopy/err_messages: 1.19 97/06/16 17:30:29 by baud 
add message "read error : Unit attention"

rtcopy/err_messages: 1.18 97/06/02 17:15:36 by baud 
add message "TP049 - option -E ignoreeoi is not valid for label type al or sl"

rtcopy/err_messages: 1.17 97/06/02 14:16:13 by baud 
add message "write error : Command timeout"

rtcopy/rtcopy.shift: 2.105 97/06/25 14:18:06 by baud 
Add lblinfo to stageupdc call for last file in the -q 1- case.

rtcopy/rtcopy.shift: 2.104 97/06/04 14:48:19 by obarring 
Accept new recfm: FS, U,bin and U,f77

rtcopy/rtcopy.shift: 2.103 97/06/04 12:08:55 by obarring 
Take all defaults for blksiz, recfm from tape daemon. Set -N in all cases if last copy was successful (conform with new tape sw).

sysreq/netreq.c: 1.28 97/07/07 14:22:32 by baud 
add support for Windows/NT

sysreq/sysreq.h: 1.7 97/07/07 14:30:49 by baud 
modify include syntax because of Windows/NT

sysreq/xdr.c: 1.18 97/07/07 14:27:06 by baud 
make it compile under Windows/NT

tms/checkjobdied.c: 1.13 97/06/20 14:25:51 by baud 
correct code for HPUX10: keep versions in tape and tms directories in sync

tms/tms.h: 1.10 97/06/26 08:48:43 by baud 
add message "TMS22 - tmsdaemon not responding\n"

tms/tmsdaemon.c: 1.34 97/06/26 08:29:20 by baud 
replace "vm" by "SYSREQ/TMS" in a comment

tms/tmsreq.c: 1.7 97/06/26 08:31:33 by baud 
replace message "TMS not responding" to distinguish between local tmsdaemon failure and central SYSREQ/TMS failure

stage/Imakefile: 1.21 97/06/13 11:11:49 by baud 
allow anybody to execute stagestat

stage/buildupath.c: 1.11 97/07/04 08:29:28 by baud 
if the command is stageclr and the file is not accessible, let stgdaemon try (the file could be in a filesystem which has been removed; in this cas the entry must be removed from the catalog)

stage/buildupath.c: 1.10 97/07/03 08:00:33 by baud 
symbolic links are not supported under Windows NT

stage/poolmgr.c: 1.24 97/06/19 17:19:54 by baud 
add function findpoolname to find if the file specified in a stagewrt or stagecat command reside in a pool

stage/procclr.c: 1.7 97/07/05 11:23:07 by baud 
if stageclr by ipath, remove all entries for that path

stage/procio.c: 1.28 97/07/07 09:32:44 by baud 
for stagewrt and stagecat, detects automatically if a file belongs to a pool or not

stage/procio.c: 1.27 97/06/17 15:42:23 by baud 
correct processing of trailing dash on stagein when several linknames are specified

stage/procio.c: 1.26 97/06/02 11:26:58 by baud 
accept record format "U,f77" for U with control words on disk and "U,bin" for U without control words on disk

stage/procqry.c: 1.16 97/07/06 14:26:18 by baud 
add option -x to get extended information (reqid + internal pathname)

stage/procqry.c: 1.15 97/06/18 11:46:51 by baud 
run also requests with -a flag in a child

stage/procqry.c: 1.14 97/06/12 15:02:27 by baud 
uses rfio_mstat to minimize the number of connections to a remote disk server

stage/procqry.c: 1.13 97/06/02 13:48:57 by baud 
display correctly recfm "U,bin" or "U,f77"

stage/procupd.c: 1.16 97/07/01 11:29:25 by baud 
split very long option values before sending them to the log; accept multiple pathnames

stage/procupd.c: 1.15 97/06/02 13:51:20 by baud 
set lrecl to blksize if recfm F, the tape is unlabelled and lrecl is not specified by user

stage/send2stgd.c: 1.18 97/07/04 16:30:52 by baud 
add support for Windows/NT

stage/send2stgd.c: 1.17 97/06/26 09:19:22 by baud 
add support for linux

stage/stage.h: 1.32 97/07/04 09:55:24 by baud 
add support for Windows NT

stage/stage.h: 1.31 97/07/04 09:51:48 by baud 
add messages STG49 and STG50

stage/stagealloc.c: 1.7 97/06/23 16:12:43 by baud 
correct processing of option -U

stage/stagecat.man: 1.6 97/06/03 15:53:17 by baud 
add recfm "U,f77" and "U,bin"

stage/stageclr.c: 1.18 97/07/04 15:39:55 by baud 
include winsock2 instead of winsock for Windows/NT

stage/stageclr.c: 1.17 97/07/04 12:25:39 by baud 
add calls to WSAStartup and WSACleanup for Windows NT

stage/stageclr.c: 1.16 97/07/04 12:19:26 by baud 
for stageclr -i, in case of failure on one path, continue with the next one

stage/stageclr.c: 1.15 97/07/02 15:28:34 by baud 
make it compile under Windows NT

stage/stageclr.man: 1.6 97/07/04 13:22:02 by baud 
for stageclr -i, in case of failure on one path, continue with the next one

stage/stagein.c: 1.32 97/07/04 15:42:14 by baud 
include winsock2 instead of winsock for Windows/NT

stage/stagein.c: 1.31 97/07/04 07:11:21 by baud 
add calls to WSAStartup and WSACleanup for Windows NT

stage/stagein.c: 1.30 97/07/02 15:33:52 by baud 
make it compile under Windows NT

stage/stagein.c: 1.29 97/06/23 14:05:17 by baud 
do not take pool name from STAGE_POOL environment variable for stagecat/stagewrt requests

stage/stagein.c: 1.28 97/06/23 09:41:36 by baud 
add support for VID mapping

stage/stagein.man: 1.27 97/06/02 16:01:33 by baud 
add recfm "U,f77" and "U,bin"

stage/stageout.man: 1.7 97/06/02 17:02:21 by baud 
add recfm "U,f77" and "U,bin"

stage/stageput.c: 1.14 97/07/04 15:44:24 by baud 
include winsock2 instead of winsock for Windows/NT

stage/stageput.c: 1.13 97/07/04 07:51:36 by baud 
add calls to WSAStartup and WSACleanup for Windows NT

stage/stageput.c: 1.12 97/07/02 15:31:36 by baud 
make it compile under Windows NT

stage/stageqry.c: 1.12 97/07/04 15:46:12 by baud 
include winsock2 instead of winsock for Windows/NT

stage/stageqry.c: 1.11 97/07/04 07:41:01 by baud 
add option -x to get extended information (reqid + internal pathname)

stage/stageqry.c: 1.10 97/07/04 07:33:01 by baud 
add calls to WSAStartup and WSACleanup for Windows NT

stage/stageqry.c: 1.9 97/07/02 15:28:54 by baud 
make it compile under Windows NT

stage/stageqry.man: 1.13 97/07/07 07:21:50 by baud 
add option -x to get extended information (reqid + internal pathname)

stage/stager.c: 1.29 97/06/02 11:27:31 by baud 
accept record format "U,f77" for U with control words on disk and "U,bin" for U without control words on disk

stage/stagewrt.man: 1.7 97/06/02 17:19:27 by baud 
add recfm "U,f77" and "U,bin"

stage/stgdaemon.c: 2.25 97/07/07 09:25:30 by baud 
remove the file and release the space only when the last entry pointing at this file is cleared

copytape/copytape.c: 1.17 97/07/03 16:46:26 by baud 
if vid is not specified, take the vsn as vid

copytape/copytape.c: 1.16 97/06/26 13:40:07 by baud 
add support for copy of mapped volumes

copytape/tpcopy.c: 1.14 97/07/06 10:14:10 by baud 
set status to ok if LIMBYSZ because -N option specified (the status was ok if -s option specified)

************************ VERSION 1.9.1.9 *****************************
./README: 1.20 97/05/30 12:10:44 by baud 
1.9.1.9 release

common/sendscsicmd.c: 1.5 97/05/27 13:27:50 by baud 
add support for linux

fhs/Imakefile: 1.5 97/05/07 10:04:43 by baud 
lorder does not exist under linux

fhs/findpgrp.c: 1.8 97/05/09 13:41:59 by baud 
add support for linux

msg/tpmstat.c: 1.6 97/05/22 14:11:24 by baud 
allow for 6 digits jid (needed for AIX)

tape/Imakefile: 1.40 97/05/07 09:33:44 by baud 
lorder does not exist under linux

tape/dmpfil.c: 1.36 97/05/16 13:52:33 by baud 
add support for density 8200C; allow DLT, 3590 and Redwood to be terminated by a single tapemark

tape/dumptape.sh: 1.22 97/05/27 17:26:05 by baud 
add message " DUMP - TAPE MOUNTED ON UNIT xxxx"

tape/dumptape.sh: 1.21 97/05/16 11:42:34 by baud 
set default maximum blocksize for Redwood to 262144

tape/findpgrp.c: 1.16 97/05/09 10:34:45 by baud 
add support for linux and clean up code for HPUX10

tape/getunitstat.c: 1.14 97/05/12 10:51:09 by baud 
add support for linux

tape/lddisplay.c: 1.10 97/05/24 07:28:23 by baud 
add support for linux

tape/mounttape.c: 1.84 97/05/27 15:24:43 by baud 
when prelabelling a DLT, a 3590 or a Redwood, write a single tapemark at the end; set the default blocksize to 262144 on Redwood if lrecl is zero, set this default to the multiple of lrecl immediately below 256k otherwise

tape/mounttape.c: 1.83 97/05/23 15:38:51 by baud 
use an ioctl specific to linux to set variable block size

tape/mounttape.c: 1.82 97/05/11 08:25:59 by baud 
make it compile under linux

tape/omsg.c: 1.3 97/05/11 08:08:44 by baud 
add support for linux

tape/posittape.c: 1.31 97/05/27 15:03:11 by baud 
avoid rewriting tapemarks except on Exabytes 8200; process option -N even for labelled tapes

tape/rbtsubr.c: 1.20 97/05/09 13:26:21 by baud 
add processing of "Cancel - Order sequence"

tape/send2tpd.c: 1.10 97/05/07 17:14:36 by baud 
add support for linux

tape/sendrep.c: 1.9 97/05/07 17:09:55 by baud 
add support for linux

tape/tape.h: 1.64 97/05/27 13:43:42 by baud 
suppress unused message TP046 (option -N is now valid also for labelled tapes)

tape/tape.h: 1.63 97/05/14 15:12:36 by baud 
add density 8200C

tape/tpdaemon.c: 1.82 97/05/09 10:32:01 by baud 
add support for linux

tape/tpmnt.c: 1.33 97/05/30 09:21:52 by baud 
accept record format FS

tape/tpmnt.c: 1.32 97/05/27 13:41:47 by baud 
accept option -N even for labelled tapes

tape/tpmnt.man: 1.26 97/05/30 11:21:05 by baud 
document recfm FS

tape/tpmnt.man: 1.25 97/05/28 09:17:08 by baud 
option -N is now also valid for labelled tapes; document new default blocksize for Redwoods

tape/tpmnt.man: 1.24 97/05/23 14:21:52 by baud 
more precise description of default record format

tape/tpmnt.man: 1.23 97/05/22 16:49:16 by baud 
document recfm FBS

tape/tpmnt.man: 1.22 97/05/22 13:30:20 by baud 
set default maximum blocksize for Redwood to 262144

tape/tprstat.c: 1.5 97/05/13 10:20:13 by baud 
allow for 6 digits jids

tape/tpstat.c: 1.9 97/05/13 10:04:51 by baud 
allow for 6 digits jid; do not display domainname if present in hostname

tape/tpusage.c: 1.6 97/05/04 09:02:30 by baud 
add support for linux

tape/unloadtps.c: 1.26 97/05/11 08:17:15 by baud 
make it compile under linux

tape/usrlbl.c: 1.17 97/05/27 13:39:40 by baud 
write only one tapemark at EOI for DLT, 3590 and Redwood; rewrite tape mark before adding a file only on Exabyte 8200

rfio/rfcp.c: 1.14 97/05/07 09:30:35 by baud 
define RFIO_KERNEL to avoid error messages at compilation time under linux

rfio/rfio_calls.c: 3.42 97/05/06 11:57:45 by baud 
suppress useless includes

rfio/rfio_calls.c: 3.41 97/05/05 18:13:09 by baud 
add support for linux

rfio/rfio_serv.c: 3.40 97/05/06 11:52:28 by baud 
add support for linux

rfio/rfstat.c: 1.4 97/05/07 09:29:04 by baud 
define RFIO_KERNEL to avoid error messages at compilation time under linux

rtcopy/err_messages: 1.16 97/05/27 11:58:08 by baud 
add message "ioctl error : Write Data Check"

rtcopy/rtcopy.awk: 2.6 97/05/14 16:33:55 by obarring 
Replace continue -> next for POSIX compliance (needed for Linux).

rtcopy/rtcopy.shift: 2.102 97/05/23 15:12:51 by obarring 
Set default blksiz to multiple of lrecl if Redwood. Make sure that user lrecl always override label.

rtcopy/rtcopy.shift: 2.101 97/05/22 17:39:54 by obarring 
Make sure that defaults set after tpinfo are given to stageupdc.

rtcopy/rtcopy.shift: 2.100 97/05/22 16:51:31 by obarring 
Make sure that blksiz defaults to 256K for tpwrite on redwood.

rtcopy/rtcopy.shift: 2.99 97/05/21 12:11:41 by obarring 
Clear lrecl before tpmnt if it has been read from the label (and it is not a retry).

rtcopy/rtcopy.shift: 2.98 97/05/12 10:39:42 by obarring 
Add "message" option to tmsreq.

rtcopy/rtcopy.shift: 2.97 97/05/07 14:02:34 by obarring 
Set default blksiz=262144 (256K) for Redwood (SD3).

rtcopy/rtcopyd.c: 2.73 97/05/14 16:28:21 by baud 
final fix for linux

rtcopy/rtcopyd.c: 2.72 97/05/12 08:50:59 by baud 
suppress last compilation errors under linux

rtcopy/tpread.c: 2.71 97/05/14 08:57:25 by obarring 
Add extra blank between TPSERV and TPSERVR(W).

rtcopy/tpsinfod.c: 1.6 97/05/12 08:45:45 by baud 
suppress last compilation errors under linux

tms/Imakefile: 1.6 97/05/07 09:37:20 by baud 
lorder does not exist under linux

tms/findpgrp.c: 1.9 97/05/09 13:23:44 by baud 
add support for linux

tms/send2tmsd.c: 1.12 97/05/08 11:16:58 by baud 
add support for linux

tms/sendrep.c: 1.9 97/05/08 11:14:57 by baud 
add support for linux

tms/tmsdaemon.c: 1.33 97/05/09 10:44:45 by baud 
add support for linux

tms/tmstat.c: 1.3 97/05/22 14:11:01 by baud 
allow for 6 digits jid (needed for AIX)

stage/procio.c: 1.25 97/05/30 10:02:56 by baud 
accept record format FS

stage/procqry.c: 1.12 97/05/29 13:46:04 by baud 
long stageqry requests are now processed in a child

stage/procupd.c: 1.14 97/05/23 15:06:27 by baud 
reset lrecl to zero in the catalog if record format U

stage/stager.c: 1.28 97/05/08 11:46:55 by baud 
must set select timeout each time for linux

stage/stgdaemon.c: 2.24 97/05/29 11:47:09 by baud 
long stageqry requests are now processed in a child

stage/stgdaemon.c: 2.23 97/05/09 21:14:34 by baud 
add support for linux

copytape/copytape.man: 1.16 97/05/30 12:03:33 by baud 
ctpdaemon hostname may also be specified thru environment variable CPTAPE_HOST

copytape/ctpdaemon.c: 1.17 97/05/30 09:54:52 by baud 
accept record format FS

copytape/ctpdaemon.c: 1.16 97/05/10 07:54:37 by baud 
add support for linux

copytape/send2ctpd.c: 1.5 97/05/28 13:30:32 by baud 
ctpdaemon hostname may also be specified thru environment variable CPTAPE_HOST

copytape/tpcopy.c: 1.13 97/05/30 09:58:12 by baud 
accept record format FS

copytape/tpcopy.c: 1.12 97/05/08 11:50:22 by baud 
must set select timeout each time for linux

************************ VERSION 1.9.1.8 *****************************
./README: 1.19 97/05/02 13:52:23 by baud 
1.9.1.8 release

examples/report.c: 1.10 97/04/29 16:29:27 by baud 
suppress warning messages at compilation time under linux

tape/tpdaemon.c: 1.81 97/04/30 11:43:55 by baud 
allow for 6 digits jid (needed for AIX)

rfio/switch_req.c: 1.9 97/04/30 11:55:16 by baud 
add support for linux

sysreq/sysreqf.c: 1.24 97/04/30 13:18:34 by baud 
add support for linux

config/linux.cf: 1.2 97/05/01 08:40:33 by baud 
use g77 as fortran compiler

config/site.def: 1.28 97/04/30 16:02:42 by obarring 
Allow for multiple hosts in the SysreqHost definition.

stage/poolmgr.c: 1.23 97/04/29 13:40:17 by baud 
avoid stgdaemon crash for stageqry -s if all elements of a pool are not accessible

************************ VERSION 1.9.1.7 *****************************
./README: 1.18 97/04/28 20:22:23 by baud 
1.9.1.7 release

fhs/checkjobdied.c: 1.8 97/04/20 08:47:56 by baud 
add support for linux

tape/Imakefile: 1.39 97/04/21 15:15:21 by baud 
add dependencies because of gnu make

tape/buildhdrlbl.c: 1.9 97/04/25 15:34:07 by baud 
add support for year 2000 onwards

tape/checkjobdied.c: 1.13 97/04/20 08:54:10 by baud 
add support for linux

tape/posittape.c: 1.30 97/04/25 15:43:22 by baud 
add support for year 2000 onwards

tape/rbtsubr.c: 1.19 97/04/15 09:44:07 by baud 
correct typo error

tape/tape.h: 1.62 97/04/22 13:18:51 by baud 
add unldcnt to tpurt structure to be able to process correctly several rls requests issued in the background from the same session (same jid)

tape/tpdaemon.c: 1.80 97/04/22 13:46:33 by baud 
process correctly several rls requests issued in the background from the same session (correct mod in version 1.77)

tape/tpusage.c: 1.5 97/04/28 14:26:47 by obarring 
Many fixes from Andrew. Olof added support for TPSERVR&W.

tape/tpusage.man: 1.4 97/04/28 15:31:50 by obarring 
Modified examples for new version of program.

rtcopy/Imakefile: 1.35 97/04/25 14:13:46 by obarring 
Further fixes for the ln -> cp change.

rtcopy/Imakefile: 1.34 97/04/25 13:38:14 by obarring 
Replace ln with cp.

rtcopy/err_messages: 1.15 97/04/22 16:16:26 by baud 
correct message "write error : No space left on device"

tms/checkjobdied.c: 1.12 97/04/20 08:42:20 by baud 
add support for linux

stage/procupd.c: 1.13 97/04/16 16:58:25 by baud 
suppress useless rewrite of the catalog

stage/stager.c: 1.27 97/04/17 21:31:21 by baud 
when TMS is defined, pass -l option value to tpread only if blp

stage/stager.c: 1.26 97/04/15 15:12:30 by baud 
add support for linux

copytape/tpcopy.c: 1.11 97/04/15 15:36:01 by baud 
add support for linux

************************ VERSION 1.9.1.6 *****************************
./CONTRIBUTORS: 1.3 97/04/14 15:42:24 by baud 
add Stefan Schael (MPI) for the port of the RFIO client to Linux

h/rfcntl.h: 1.8 97/04/14 09:21:44 by baud 
add support for linux

tape/mounttape.c: 1.81 97/04/14 10:03:57 by baud 
change variable name from got_reply to get_reply

tape/omsg.c: 1.2 97/04/11 15:09:13 by baud 
include <stdio.h> to define NULL (needed under hpux)

tape/rbtsubr.c: 1.18 97/04/14 12:01:07 by baud 
check for invalid loader type

tape/rbtsubr.c: 1.17 97/04/14 09:51:56 by baud 
do not use functions as argument of RETURN to avoid double execution of the function

tape/rbtsubr.c: 1.16 97/04/13 10:25:33 by baud 
does not use ibmrbterr as argument of RETURN otherwise the message gets logged twice

tape/rbtsubr.c: 1.15 97/04/12 10:50:57 by baud 
set status (output param of qmid) to zero when operation complete

rfio/feof.c: 3.4 97/04/14 09:24:56 by baud 
add support for linux

rfio/fread.c: 3.6 97/04/14 09:29:54 by baud 
add support for linux

rfio/fwrite.c: 3.4 97/04/14 09:30:55 by baud 
add support for linux

rfio/open.c: 3.16 97/04/14 09:32:12 by baud 
add support for linux

rtcopy/dktotpF.c: 2.34 97/04/11 15:35:01 by obarring 
 Declare tpden and tpdevtyp static to make it compile on HP.

rtcopy/dktotpU.c: 2.31 97/04/11 15:32:36 by obarring 
Declare tpden and tpdevtyp static to make it compile on HP.

rtcopy/tptodkF.c: 2.42 97/04/11 15:35:47 by obarring 
Declare tpden and tpdevtyp static to make it compile on HP.

rtcopy/tptodkU.c: 2.33 97/04/11 15:33:49 by obarring 
Declare tpden and tpdevtyp static to make it compile on HP.

************************ VERSION 1.9.1.5 *****************************
common/getifnam.c: 1.16 97/04/10 14:33:27 by baud 
use ioctl instead of netioctl because on 64bits machines, the third argument is 32 bits long if integer or 64 bits long if pointer; it can't be declared as int nor pointer

************************ VERSION 1.9.1.4 *****************************
./README: 1.17 97/04/09 13:41:48 by baud 
1.9.1.4 release

tape/dumptape.sh: 1.20 97/04/09 14:50:37 by baud 
allow to use 3490 drives to dump the content of 3480 cartridges

tape/rbtsubr.c: 1.14 97/04/09 09:19:26 by baud 
fix typo error (IBM only)

tape/unloadtps.c: 1.25 97/04/09 15:06:55 by baud 
change open flags for Solaris 2.5

tape/unloadtps.c: 1.24 97/04/09 09:20:17 by baud 
fix typo error (IBM only)

rtcopy/tpclient.c: 1.4 97/04/09 15:50:40 by obarring 
Allow read of 3480 on 3490 units.

config/Imake.tmpl: 1.6 97/04/09 11:15:29 by baud 
add support for linux

NEW file: config/linux.cf(1.1)
config/linux.cf: 1.1 97/04/09 11:11:20 by baud 
date and time created 97/04/09 11:11:20 by baud

************************ VERSION 1.9.1.3 *****************************
./setosflags: 1.6 97/04/08 11:39:29 by baud 
add support for linux

common/getifnam.c: 1.15 97/04/04 17:32:01 by baud 
add missing endif + missing include <trace.h>

common/log.c: 1.24 97/04/08 11:43:44 by baud 
add support for linux

common/setnetio.c: 1.5 97/04/04 17:30:46 by baud 
add missing include <trace.h>

h/rfio.h: 3.32 97/04/08 12:00:57 by baud 
add support for linux

msg/Imakefile: 1.7 97/04/08 11:47:32 by baud 
add support for linux

msg/msgr.c: 1.11 97/04/08 11:49:53 by baud 
add support for linux

msg/oper.c: 1.16 97/04/08 11:53:20 by baud 
add support for linux

msg/term.c: 1.12 97/04/08 11:51:21 by baud 
add support for linux

tape/tpdaemon.c: 1.79 97/04/05 17:48:07 by baud 
store rpn in rlsq

rfio/rfstatfs.c: 1.5 97/04/08 12:56:04 by baud 
add support for linux

rtcopy/rtcopy.shift: 2.96 97/04/08 16:12:51 by obarring 
Bugfix for VSN!=VID: trigger VIDMAP only when tmsrep has > 16 items.

rtcopy/rtcopyd.c: 2.71 97/04/08 16:23:08 by baud 
suppress most of the compilation errors under linux

rtcopy/tpread.c: 2.70 97/04/08 15:19:21 by obarring 
Make sure that volumes with VSN!=VID are not interpreted as VIDMAPped.

rtcopy/tpread.c: 2.69 97/04/08 14:18:08 by obarring 
Fix realloc bug in gettpserv.

rtcopy/tpsinfod.c: 1.5 97/04/08 15:03:45 by baud 
suppress some of the warnings when compiling under linux

imake/imakemdep.h: 1.5 97/04/08 11:40:37 by baud 
add support for linux

stage/packfseq.c: 1.6 97/04/08 13:18:42 by baud 
suppress warning in compilation under linux

stage/procio.c: 1.24 97/04/08 13:25:48 by baud 
suppress warning in compilation under linux

stage/procqry.c: 1.11 97/04/08 15:19:59 by baud 
add support for linux

DELETED file : msg/term.c- (1.11)
************************ VERSION 1.9.1.2 *****************************
./README: 1.16 97/04/04 11:17:45 by baud 
1.9.1.2 release

./setosflags: 1.5 97/02/27 10:16:15 by baud 
add BOOTSTRACPCFLAGS=HPUX10 because of cpp location

NEW file: common/Makefile.vms(1.1)
common/Makefile.vms: 1.1 97/01/24 07:46:37 by hemmer 
date and time created 97/01/24 07:46:37 by hemmer

common/getacct.c: 1.9 97/01/23 07:58:32 by hemmer 
Add sys$getuai VMS declaration

common/getifnam.c: 1.14 97/01/23 17:51:57 by hemmer 
Added VMS/MULTINET specifics, and some tracing. Fixed copyrights.

common/sendscsicmd.c: 1.4 97/02/07 15:45:15 by baud 
on IRIX display message based on sense bytes if CAM status == DSRT_SENSE

common/setnetio.c: 1.4 97/01/23 17:22:42 by hemmer 
Changed copyrights, added tracing

common/socket.c: 1.23 97/01/23 18:37:00 by hemmer 
Removed MULTINET duplicate definitions

examples/report.c: 1.9 97/01/27 17:57:25 by baud 
Solaris 2.5 has the getrusage routine

fhs/fhsdaemon.c: 1.16 97/02/02 09:35:08 by baud 
add forgotten format specification in fhslogit call

msg/msgdaemon.c: 1.19 97/02/21 09:56:42 by baud 
noterm now exits directly from father process

msg/msgdaemon.c: 1.18 97/02/19 16:14:51 by baud 
correct previous mod

msg/msgdaemon.c: 1.17 97/02/19 14:29:17 by baud 
add exit(0) in father code to avoid message "bind(): Address already in use" at startup; fix error message in case of fork failure

msg/msgdaemon.c: 1.16 97/02/18 16:33:56 by baud 
use htons for sin_port otherwise msgdaemon does not work on DEC machines

msg/term.c: 1.11 97/02/21 09:54:42 by baud 
in noterm, exit directly from father process

msg/term.c: 1.10 97/02/19 17:12:39 by baud 
call setsid instead of setpgrp for alpha-osf; noterm returns pid if in parent

NEW file: msg/term.c-(1.11)
msg/term.c-: 1.11 97/02/19 16:02:30 by baud 
sccs prt term.c

tape/Imakefile: 1.38 97/04/03 17:54:03 by baud 
add processing of BuildTpusage

tape/Imakefile: 1.37 97/03/29 07:43:10 by baud 
add cvtden to the list of objects needed for the build of tpinfo

tape/Imakefile: 1.36 97/02/18 13:34:31 by baud 
add DMSC API interface for SONY robot; repackage operator messages routines so unloadtps can call them; export tpusage statistics program

tape/cvtden.c: 1.11 97/03/28 09:41:38 by baud 
add function den2aden to convert densities from integer to alphanumeric

tape/dmplbl.c: 1.3 97/02/03 14:20:26 by baud 
correct block number in messages

tape/dumptape.sh: 1.19 97/03/29 07:48:27 by baud 
take density given by tpinfo

tape/mounttape.c: 1.80 97/04/04 14:09:32 by baud 
retry to unload if demount reports "not unloaded"; abort if unload fails

tape/mounttape.c: 1.79 97/03/24 15:10:41 by baud 
implement retries for robot mount/demount; configure drive down in case of mount/demount unrecoverable drive failure

NEW file: tape/omsg.c(1.1)
tape/omsg.c: 1.1 97/03/24 15:12:58 by baud 
date and time created 97/03/24 15:12:58 by baud

tape/rbtsubr.c: 1.13 97/04/04 13:12:49 by baud 
add comment for RBT_UNLD_DMNT

tape/rbtsubr.c: 1.12 97/04/01 09:37:12 by baud 
add processing of 2 IBM robot errors: "Library Drive Not Unloaded" and "Unexpected hardware failure"

tape/rbtsubr.c: 1.11 97/03/24 15:55:53 by baud 
Add support for SONY robot using DMSC API; add demount force; wait for robot demount to complete; implement recovery action tables

tape/readlbl.c: 1.19 97/04/02 08:05:59 by baud 
under Solaris 2.5+patch or Solaris 2.6, reading a large block gives ENOMEM

tape/tape.h: 1.61 97/04/01 08:52:07 by baud 
define RBT_UNLD_DMNT

tape/tape.h: 1.60 97/03/28 10:16:34 by baud 
define structure rlsq

tape/tape.h: 1.59 97/03/28 09:43:33 by baud 
add density field to tpinfo reply structure

tape/tape.h: 1.58 97/03/26 17:18:06 by baud 
define ETDCA   224     /* drive currently assigned */

tape/tape.h: 1.57 97/03/25 09:42:18 by baud 
add constants for rbtsubr routines; modify message TP041

tape/tpconfig.man: 1.3 97/03/27 07:18:40 by baud 
add exit code 224 for Drive currently assigned

tape/tpdaemon.c: 1.78 97/04/03 13:59:40 by baud 
add message "killing process" when killing mounttape process after job has died

tape/tpdaemon.c: 1.77 97/03/31 21:22:35 by baud 
add density to tpinfo reply; pass default density to mounttape/unloadtps/tpinfo if none specified by user; allow for simultaneous rls requests for different drives from same jid

tape/tpdaemon.c: 1.76 97/03/26 17:33:21 by baud 
return ETDCA (instead EBUSY) to tpconfig if the drive is currently assigned. This fixes the problem of tpconfig down followed by tpconfig up while the drive is assigned (final status was ok in tpstat, but # configured drives was wrong in tprstat)

tape/tpdaemon.c: 1.75 97/03/03 08:19:15 by baud 
suppress extraneous newline in message "killing.."

tape/tpinfo.c: 1.7 97/03/28 10:20:37 by baud 
add density to tpinfo reply

tape/tpinfo.man: 1.3 97/03/28 10:24:01 by baud 
add density to tpinfo reply

tape/unloadtps.c: 1.23 97/04/01 16:53:04 by baud 
force unload before retrying demount if robot reports "Drive Not Unloaded"

tape/unloadtps.c: 1.22 97/03/24 14:39:25 by baud 
implement retries for robot demount; configure drive down in case of unload or demount failure

tape/usrlbl.c: 1.16 97/03/24 11:15:48 by baud 
add function setdevtype

rfio/parse.c: 3.16 97/02/28 09:48:00 by hemmer 
In case file local and no shift.conf and error, an invalid msg
would have been returned.

rtcopy/dktotpF.c: 2.33 97/03/20 16:47:44 by obarring 
Add -T option for devtype and call setdevtype(tpdevtype,tpden)

rtcopy/dktotpU.c: 2.30 97/03/20 16:47:35 by obarring 
Add -T option for devtype and call setdevtype(tpdevtype,tpden)

rtcopy/err_messages: 1.14 97/04/01 11:37:50 by baud 
add message "Library is Offline to Host."

rtcopy/err_messages: 1.13 97/03/25 08:27:08 by baud 
add message "Volume misplaced"

rtcopy/err_messages: 1.12 97/03/17 14:23:14 by baud 
add message "fork() failed: Resource temporarily unavailable"

rtcopy/err_messages: 1.11 97/02/18 13:19:52 by baud 
reformat IBM robot error messages and add "Volume no longer in inventory"

rtcopy/rtcopy.shift: 2.95 97/04/03 17:22:03 by obarring 
Move setting of notsetdefault flag to after the TMS query.

rtcopy/rtcopy.shift: 2.94 97/03/27 14:56:30 by obarring 
Take care of new tpinfo options (-T and -d).

rtcopy/rtcopy.shift: 2.93 97/03/11 16:44:50 by obarring 
Add protection against calling tpmnt with empty label string.

rtcopy/rtcopy.shift: 2.92 97/03/10 17:20:07 by obarring 
Protect against calling tpmnt with -d if density not set (and no TMS)>

rtcopy/rtcopy.shift: 2.91 97/02/12 09:38:09 by obarring 
Suppress TP013 msg from reserv when redirecting 3480 req. to 3490 dev.

rtcopy/rtcopy.shift: 2.90 97/01/28 17:39:09 by obarring 
Make sure that -T ... is always stripped off from lblinfo.

rtcopy/rtcopyd.c: 2.70 97/03/27 15:07:53 by obarring 
Suppress "The service for .. does not exist" when trying CT1 on CT2 devices.

rtcopy/rtcopyd.c: 2.69 97/02/14 12:19:00 by baud 
change select timeout from 60 to 10 seconds

rtcopy/rtcopyd.c: 2.68 97/01/28 17:41:30 by obarring 
Fix to accept CT1 on CT2 in getinfo(). Fix also for fork() errno.

rtcopy/rtstat.c: 1.15 97/04/01 16:06:05 by baud 
add support for TPSERVR and TPSERVW

rtcopy/rtstat.c: 1.14 97/02/12 10:38:38 by baud 
avoid program crash in case of no normal user request (only dev req) and option -S is not specified; do not display global statistics if option -g is specified

rtcopy/tpread.c: 2.68 97/01/29 17:38:16 by obarring 
Remove check on stgflag in TMS call-branch to enforce VIDMAP QUERY.

rtcopy/tptodkF.c: 2.41 97/03/20 16:47:12 by obarring 
Add -T option for devtype and call setdevtype(tpdevtype,tpden)

rtcopy/tptodkF.c: 2.40 97/03/07 17:18:40 by obarring 
Add RT212 (file truncated) when maxsize is exceeded.

rtcopy/tptodkU.c: 2.32 97/03/20 16:47:24 by obarring 
Add -T option for devtype and call setdevtype(tpdevtype,tpden)

rtcopy/tptodkU.c: 2.31 97/03/07 17:18:00 by obarring 
Add RT212 (file truncated) when maxsize is exceeded.

sysreq/make_multinet.com: 1.5 97/03/07 16:19:50 by obarring 
Make it work in an untared SHIFT environment and fix some includes.

sysreq/netreq.c: 1.27 97/03/07 16:14:59 by obarring 
Allow for list of sysreq hosts. Add test for pw == NULL.

sysreq/sysreq.c: 1.16 97/03/07 16:13:02 by obarring 
Correct pw->name to name for VMS (pw structure undefined).

sysreq/sysreqc.c: 1.12 97/03/07 16:15:57 by obarring 
Add do_retry argument in _sysreq for VMS.

sysreq/sysreqf.c: 1.23 97/03/07 16:16:57 by obarring 
Add do_retry argument in call to _sysreq for VMS.

tms/tmsdaemon.c: 1.32 97/02/02 09:32:19 by baud 
add forgotten format specification in tmslogit call

imake/imakemdep.h: 1.4 97/02/27 09:28:24 by baud 
cpp is in /usr/ccs/lbin on HPUX10.20 (no /lib/cpp link anymore)

config/Library.tmpl: 1.9 97/04/03 15:38:05 by baud 
add processing of BuildTpusage

config/Project.tmpl: 1.10 97/04/03 15:29:50 by baud 
add processing of BuildTpusage

config/site.def: 1.27 97/04/03 15:40:20 by baud 
define BuildTpusage YES

config/site.def: 1.26 97/02/05 09:32:04 by baud 
add support for Sony DMSC API

NEW file: stage/Makefile.vms(1.2)
stage/Makefile.vms: 1.2 97/01/31 16:26:27 by hemmer 
alws multinet libs okay. DEC C picky about nultiple /DEF=.

stage/buildupath.c: 1.9 97/03/31 14:04:57 by baud 
allow for long current working directory name; check on pathname length; add an argument size to build_Upath to allow for path length check

NEW file: stage/multinet.opt(1.1)
stage/multinet.opt: 1.1 97/01/24 08:24:20 by hemmer 
date and time created 97/01/24 08:24:20 by hemmer

stage/poolmgr.c: 1.22 97/01/26 08:34:02 by baud 
change variable name "nextdir" to "next_pool_elem"

stage/procio.c: 1.23 97/03/01 10:53:51 by baud 
add message STG92 and check on uid

stage/procio.c: 1.22 97/02/12 16:15:59 by baud 
process -z option also for stagewrt

stage/procqry.c: 1.10 97/03/27 15:15:13 by baud 
change output format: set field width to display fseq to at least 6 characters; reduce number of columns to display nbaccess by 2

stage/procupd.c: 1.12 97/02/28 16:58:56 by baud 
move piece of code to prepare for deferred allocation option

stage/procupd.c: 1.11 97/02/12 16:50:55 by baud 
process -z option also for stagewrt

stage/stage.h: 1.30 97/04/02 16:23:43 by baud 
add message "STG48 - the catalog %s seems to be corrupted\n"

stage/stage.h: 1.29 97/03/20 10:52:07 by baud 
modify again message STG35

stage/stage.h: 1.28 97/03/20 08:33:16 by baud 
generalize message STG35

stage/stage.h: 1.27 97/02/28 16:55:56 by baud 
add message STG92

stage/stage.h: 1.26 97/01/26 08:30:32 by baud 
uid_t, gid_t are now defined by vms itself; change variable name "nextdir" to "next_pool_elem"

stage/stagealloc.c: 1.6 97/03/31 14:22:35 by baud 
add sizeof(path) to arguments for build_Upath

stage/stageclr.c: 1.14 97/03/28 14:19:13 by baud 
fix previous mod (incorrect exit code in case of error in -i option processing)

stage/stageclr.c: 1.13 97/03/27 15:35:18 by baud 
expand pathnames in -i directives and -L and -P options

stage/stageclr.man: 1.5 97/03/27 15:39:35 by baud 
now stageclr expand pathnames in -i directives and -L and -P options

stage/stageget.c: 1.3 97/03/31 14:26:21 by baud 
add sizeof(path) to arguments for build_Upath

stage/stagein.c: 1.27 97/03/31 14:30:15 by baud 
add sizeof(path) to arguments for build_Upath

stage/stagein.c: 1.26 97/03/20 08:35:11 by baud 
modify for new format of message STG35

stage/stagein.man: 1.26 97/03/27 07:56:51 by baud 
more precise information about -q ux option

stage/stageput.c: 1.11 97/03/31 14:33:41 by baud 
add sizeof(path) to arguments for build_Upath

stage/stageqry.man: 1.12 97/03/27 15:25:16 by baud 
describe state STAGEALLOC

stage/stager.c: 1.25 97/01/30 13:12:03 by baud 
do not put options -d, -g, -l and -v on tpread/tpwrite requests if compiled with TMS (because of vid mapping)

stage/stageupdc.c: 1.8 97/03/31 14:19:10 by baud 
add sizeof(path) to arguments for build_Upath

stage/stgdaemon.c: 2.22 97/04/02 16:40:41 by baud 
add check on catalog integrity at startup time

stage/stgdaemon.c: 2.21 97/02/12 16:55:57 by baud 
add setsockopt (stg_s, SOL_SOCKET, SO_REUSEADDR,...

copytape/copytape.c: 1.15 97/02/12 15:50:38 by baud 
add message + exit code for "COPY SUCCESSFUL, BUT VIDMAP FAILURE"

copytape/copytape.c: 1.14 97/02/09 09:28:47 by baud 
add option -m for vid mapping

copytape/copytape.h: 1.12 97/02/12 15:28:15 by baud 
add reply type UPD_VIDMAP and exit code 190 (vidmap failure)

copytape/copytape.man: 1.15 97/04/01 12:03:38 by baud 
add option -m for vid mapping

copytape/copytape.man: 1.14 97/01/29 15:48:31 by baud 
document option -E ignoreeoi

copytape/ctpdaemon.c: 1.15 97/02/09 09:35:39 by baud 
add option -m for vid mapping

copytape/send2ctpd.c: 1.4 97/02/12 15:48:36 by baud 
add vid mapping

copytape/sendrep.c: 1.4 97/02/12 15:46:12 by baud 
add vid mapping

copytape/tpcopy.c: 1.10 97/02/12 15:44:49 by baud 
add vid mapping

copytape/tpcpin.ksh: 1.3 97/03/27 07:13:48 by baud 
truncate ps output because awk accepts 99 fields max. in a line

copytape/tpcpout.ksh: 1.5 97/03/27 07:15:06 by baud 
truncate ps output because awk accepts 99 fields max. in a line

copytape/tpcpout.ksh: 1.4 97/02/10 15:18:14 by baud 
add option -z because of vid mapping

************************ VERSION 1.9.1.1 *****************************
./README: 1.15 97/01/21 09:51:26 by baud 
1.9.1.1 release

tape/mounttape.c: 1.78 97/01/19 08:02:15 by baud 
introduce support of STK robot using CDK toolkit

tape/rbtsubr.c: 1.10 97/01/21 08:40:25 by baud 
give an operator message and configure drive down if "Device is not in library"

tape/rbtsubr.c: 1.9 97/01/19 08:09:02 by baud 
introduce support of STK robot using CDK toolkit

rtcopy/rtstat.c: 1.13 97/01/19 15:18:51 by baud 
avoid rtstat looping when an accounting file does not exist

rtcopy/rtstat.c: 1.12 97/01/19 09:27:01 by baud 
fix typo error in insert_stat routine which made rtstat crash in case of incorrect device group

stage/getlisttp.c: 1.2 95/02/14 16:31:11 by baud 
correct processing of multiple vids

stage/getlisttp.c: 1.1 94/02/09 08:18:06 by baud 
date and time created 94/02/09 08:18:06 by baud

stage/stageclr.c: 1.12 97/01/21 08:49:34 by baud 
add option -G (mainly for VMS)

stage/stagein.c: 1.25 97/01/20 21:40:07 by baud 
remove extraneous spaces

stage/stagein.c: 1.24 97/01/20 16:21:45 by baud 
on VMS, include <unixio.h> instead of <unistd.h>

stage/stagein.c: 1.23 97/01/20 10:46:59 by baud 
allow for postfixes on command names

stage/stageput.c: 1.10 97/01/20 21:43:52 by baud 
remove extraneous blanks

stage/stageqry.c: 1.8 97/01/21 08:47:27 by baud 
add option -G (mainly for VMS)

copytape/copytape.h: 1.11 97/01/17 09:27:48 by baud 
define flag IGNOREEOI for option -E ignoreeoi

copytape/ctpdaemon.c: 1.14 97/01/17 09:23:51 by baud 
add option -E ignoreeoi

copytape/tpcopy.c: 1.9 97/01/17 09:35:18 by baud 
add option -E ignoreeoi

************************ VERSION 1.9.1.0 *****************************
tape/tpmnt.c: 1.31 97/01/11 11:18:47 by baud 
fix getopt args (-Q option forgotten)

rtcopy/rtcopy.shift: 2.89 97/01/14 09:32:08 by obarring 
Exit if attempted write to VIDMAPped volume.

rtcopy/rtcopy.shift: 2.88 97/01/10 18:12:36 by obarring 
Fix a syntax bug in the tpmnt -Q option.

rtcopy/rtcopy.shift: 2.87 97/01/07 15:51:15 by obarring 
Modifications to allow VID mapping (TMS VIDMAP).

rtcopy/tpread.c: 2.67 97/01/13 19:08:58 by obarring 
Switch to VIDMAP.

rtcopy/tpread.c: 2.66 97/01/13 19:04:07 by obarring 
Fix some pbs. in the new server selection.

stage/getlisttp.c: 1.3 97/01/13 08:36:57 by baud 
add support for vms

stage/stage.h: 1.25 97/01/14 15:27:15 by baud 
on vms, normal return codes must be even values

copytape/copytape.man: 1.13 97/01/07 09:40:29 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

************************ VERSION 1.8.4.1 *****************************
common/sendscsicmd.c: 1.3 96/12/17 09:36:08 by baud 
add Release Sim Queue if Sim Queue frozen under Digital Unix

common/sendscsicmd.c: 1.2 96/12/12 14:25:31 by baud 
fix processing for osf

tape/Imakefile: 1.35 97/01/06 15:18:04 by baud 
change check on CDK availability

tape/dmpfil.c: 1.35 96/12/31 08:50:56 by baud 
use devtype provided by tpinfo; add density 8500C and support for Redwood

tape/dumptape.man: 1.7 96/12/20 15:24:21 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

tape/dumptape.sh: 1.18 96/12/29 09:59:57 by baud 
call tpinfo to get device type and pass it to dmpfil

tape/sonysubr.c: 1.3 96/12/12 14:29:59 by baud 
add SCSI_NONE to the flags for check_unit_ready, locate, rewind, unload

tape/tape.h: 1.56 96/12/29 10:16:12 by baud 
add density 8500C

tape/tape.h: 1.55 96/12/29 09:00:18 by baud 
add devtype to tpinfo reply structure

tape/tpdaemon.c: 1.74 96/12/29 09:38:19 by baud 
add message TP037 if path specified in tpinfo request is not found

tape/tpdaemon.c: 1.73 96/12/29 09:02:38 by baud 
add devtype to tpinfo reply

tape/tpdaemon.man: 1.6 96/12/20 09:53:13 by baud 
add DAT, Redwood and Vision Boxes

tape/tpinfo.c: 1.6 96/12/30 14:51:29 by baud 
fix compilation error

tape/tpinfo.c: 1.5 96/12/30 13:50:17 by baud 
suppress postfix /VB in devtype values

tape/tpinfo.c: 1.4 96/12/29 09:40:47 by baud 
print on stderr message formatted by tpdaemon if any

tape/tpinfo.c: 1.3 96/12/29 09:05:43 by baud 
add devtype to tpinfo reply

tape/tpinfo.man: 1.2 96/12/29 09:08:52 by baud 
add devtype to tpinfo reply

tape/tplabel.man: 1.7 96/12/20 15:20:52 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

tape/tpmnt.man: 1.21 96/12/20 11:53:30 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

rtcopy/err_messages: 1.10 96/12/16 15:24:40 by baud 
add messages: "READ ERROR: Data Check", "read error : Command timeout", "netread(): No route to host"

rtcopy/rtcopy.shift: 2.86 97/01/04 16:31:19 by obarring 
Allow for 3480 read mounts on 3490 devices.

rtcopy/rtstat.c: 1.11 96/12/18 12:00:36 by baud 
add jid to the detailed report of tape errors

rtcopy/rtstat.c: 1.10 96/12/16 15:16:07 by baud 
ignore /VB (Vision boxes) in device types; ignore messages "TMS not responding"

rtcopy/tpread.c: 2.65 97/01/01 16:18:33 by obarring 
Allow for 3480 read mounts on 3490 devices

rtcopy/tpread.man: 1.18 96/12/20 15:30:29 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

tms/tmsexit.c: 1.10 96/12/20 08:16:11 by baud 
accept 3480 cartridges on 3490 drives in read mode only

config/site.def: 1.25 97/01/06 15:22:31 by baud 
add default directory path for CDK toolkit

stage/stagecat.man: 1.5 96/12/20 15:16:49 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

stage/stagein.man: 1.25 96/12/20 15:10:02 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

stage/stageout.man: 1.6 96/12/20 15:12:20 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

stage/stagewrt.man: 1.6 96/12/20 15:14:06 by baud 
add densities for DAT, DLT2000/DLT7000, NTP and Redwood

************************ VERSION 1.8.4.0 *****************************
./README: 1.14 96/12/12 09:40:25 by baud 
1.8.4.1 release

./setosflags: 1.4 96/10/23 14:21:45 by baud 
add support for IRIX6

./setosflags: 1.3 96/10/15 08:18:16 by baud 
convert OSMINNO to integer on Sun platforms

common/Imakefile: 1.18 96/12/10 15:27:01 by baud 
add file sendscsicmd

NEW file: common/sendscsicmd.c(1.1)
common/sendscsicmd.c: 1.1 96/12/10 15:21:56 by baud 
date and time created 96/12/10 15:21:56 by baud

common/serror.c: 1.28 96/10/08 12:06:28 by baud 
add message for SETMSNOTACT "TMS not active"

common/socket.c: 1.22 96/12/06 10:31:35 by obarring 
Add include of time.h for VMS/MULTINET version.

examples/report.c: 1.8 96/10/11 13:53:44 by boissat 
Port to HPUX-10.10

h/rfio.h: 3.31 96/10/23 14:18:53 by baud 
suppress compilation error under IRIX6

NEW file: h/scsictl.h(1.1)
h/scsictl.h: 1.1 96/12/10 15:23:09 by baud 
date and time created 96/12/10 15:23:09 by baud

h/serrno.h: 1.18 96/10/08 12:04:20 by baud 
add SETMSNOTACT

fhs/fhs.h: 1.4 96/11/05 09:35:56 by baud 
change interval to check for jobs that have died to 3 minutes

tape/Imakefile: 1.34 96/12/11 08:47:48 by baud 
sendscsicmd.c is now in directory common; scsictl.h is now in directory h

tape/Imakefile: 1.33 96/12/03 17:38:46 by baud 
suppress warning messages at loading time under IRIX 6.2

tape/Imakefile: 1.32 96/12/03 09:25:27 by baud 
add support for StorageTek CDK; allow SONYRAW on other platforms than hpux

tape/Imakefile: 1.31 96/12/01 10:59:21 by baud 
add dumplabel and dmplbl

tape/Imakefile: 1.30 96/11/15 15:43:10 by baud 
add file sendscsicmd.c

tape/Imakefile: 1.29 96/10/23 16:15:23 by baud 
suppress -lsun for IRIX6

tape/cvtden.c: 1.10 96/12/07 09:53:39 by baud 
add densities for Redwood

tape/cvtden.c: 1.9 96/10/10 15:24:24 by baud 
add densities 20G, 20GC, 35G, 35GC

tape/dmpfil.c: 1.34 96/12/11 17:08:26 by baud 
modify READ ERROR messages to enable more meaningful classification of error messages by rtstat

tape/dmpfil.c: 1.33 96/10/14 21:09:47 by baud 
correct end of processing when number of files is limited either by user or by default

tape/dmpfil.c: 1.32 96/10/14 08:57:19 by baud 
add support for DAT tapes

tape/dmpfil.c: 1.31 96/10/11 16:34:12 by baud 
add densities 20G, 20GC, 35G and 35GC; set default to one file for long media (i.e. not 3420 nor 3480/3490)

NEW file: tape/dmplbl.c(1.2)
tape/dmplbl.c: 1.2 96/12/11 17:27:20 by baud 
modify READ ERROR messages to enable more meaningful classification of error messages

NEW file: tape/dumplabel.sh(1.1)
tape/dumplabel.sh: 1.1 96/12/01 10:59:53 by baud 
date and time created 96/12/01 10:59:53 by baud

tape/dumptape.man: 1.6 96/10/11 16:44:23 by baud 
change default to one datafile for long media

tape/dumptape.sh: 1.17 96/10/11 16:39:48 by baud 
do not set the default number of files to be dumped

tape/dumptape.sh: 1.16 96/10/09 08:29:14 by baud 
process conditions "too many tape users" and "reselect server"

tape/lddisplay.c: 1.9 96/12/11 09:49:45 by baud 
sendscsicmd is now in the directory common

tape/lddisplay.c: 1.8 96/11/04 09:37:50 by baud 
add display on Vision Boxes; add support for hpux, sgi and alpha-osf

tape/mounttape.c: 1.77 96/12/07 10:31:26 by baud 
add processing of -Q option (first and last files of a mapped volume);add load display for Redwood drives

tape/mounttape.c: 1.76 96/12/05 17:08:56 by baud 
transfers also the null terminating byte for error messages otherwise multiple messages get mixed

tape/mounttape.c: 1.75 96/11/01 14:53:08 by baud 
add display on Vision Boxes

tape/posittape.c: 1.29 96/12/08 10:55:54 by baud 
add fast positionning for Redwood under Digital Unix; add processing of -Q option

tape/posittape.c: 1.28 96/11/15 13:46:27 by baud 
allow for DLT/VB

tape/readlbl.c: 1.18 96/09/24 13:07:55 by baud 
recognize also blank tape on hpux

tape/send2tpd.c: 1.9 96/10/24 13:13:24 by baud 
add support for IRIX5 and IRIX6

tape/sendrep.c: 1.8 96/10/24 13:12:07 by baud 
add support for IRIX5 and IRIX6

tape/sonysubr.c: 1.2 96/12/11 09:47:54 by baud 
add support for IRIX by using sendscsicmd from directory common

tape/tape.h: 1.54 96/12/07 09:52:29 by baud 
add densities for Redwood; change size of loader field because of STK robot; add fields to store -Q option (first and last files of a mapped volume)

tape/tape.h: 1.53 96/11/05 09:33:08 by baud 
change interval to check for jobs that have died to 3 minutes

tape/tape.h: 1.52 96/10/10 15:22:28 by baud 
add densities 20G, 20GC, 35G, 35GC

tape/tpdaemon.c: 1.72 96/12/08 11:02:11 by baud 
subtract (Qfirst-1) from cfseq for tpinfo

tape/tpdaemon.c: 1.71 96/12/07 10:15:28 by baud 
add processing of -Q option (first and last files of a mapped volume)

tape/tpdaemon.c: 1.70 96/10/24 13:18:02 by baud 
add support for IRIX5 and IRIX6

tape/tperror.c: 1.17 96/12/12 09:23:09 by baud 
add ASC and ASCQ values to error message when available; move DEC cam error processing to common/sendscsicmd.c

tape/tperror.c: 1.16 96/10/28 15:51:54 by baud 
suppress extraneous newlines in user messages

tape/tperror.c: 1.15 96/09/24 10:50:25 by baud 
under hpux, sense key is reported in dsreg1 (not erreg)

tape/tpmnt.c: 1.30 96/12/09 08:46:30 by baud 
give an error message if requested file is incompatible with -Q option value (without mounting the tape)

tape/tpmnt.c: 1.29 96/12/07 10:00:06 by baud 
add processing of -Q option (first and last files of a mapped volume)

tape/unloadtps.c: 1.21 96/12/07 10:11:39 by baud 
add load display for Redood drives

tape/unloadtps.c: 1.20 96/11/01 12:39:24 by baud 
add display on Vision Boxes

tape/usrlbl.c: 1.15 96/10/31 15:35:54 by baud 
add code for IRIX support

rfio/Imakefile: 1.38 96/10/23 16:00:42 by baud 
suppress -lsun for IRIX6

rfio/Imakefile: 1.37 96/09/26 16:30:04 by boissat 
Export of rfstat

rfio/pclose.c: 1.4 96/09/23 10:57:30 by boissat 
Wrong file pointer passed in local mode

rfio/pread.c: 1.5 96/09/23 11:09:58 by boissat 
Wrong file pointer passed in local mode

rfio/rfio_calls.c: 3.40 96/10/23 14:29:17 by baud 
suppress compilation errors under IRIX6

rfio/rfio_serv.c: 3.39 96/10/01 15:17:22 by boissat 
Fixing zombie processes under SOLARIS

rfio/stat.c: 3.7 96/12/04 15:47:00 by boissat 
rfio_stat following symbolic links (as rfio_open!)

rtcopy/Imakefile: 1.33 96/12/11 10:58:20 by baud 
don't restrict support of Sony drives in raw mode to hpux

rtcopy/Imakefile: 1.32 96/10/23 16:17:44 by baud 
suppress -lsun for IRIX6

rtcopy/dktotpF.c: 2.32 96/11/04 16:53:06 by baud 
allocate one block buffer if blksize specified greater than RTCOPYBUFFER NBPAGES or DEFNBPAGES

rtcopy/dumptape.c: 1.6 96/12/03 13:35:42 by baud 
reset reply buffer length for sysreq before retrying to avoid message "User buffer too small"

rtcopy/dumptape.c: 1.5 96/10/11 10:48:39 by baud 
process conditions "too many tape users" and "reselect server"

rtcopy/err_messages: 1.9 96/11/11 11:55:23 by baud 
add message "read error : CCB request aborted by the host"

rtcopy/err_messages: 1.8 96/11/04 16:29:12 by baud 
add messages "ioctl error : No sense" and "open error : I/O error"

rtcopy/err_messages: 1.7 96/11/04 11:16:06 by baud 
correct messages TP017 and "tpinfo error"

rtcopy/err_messages: 1.6 96/10/30 14:46:02 by baud 
add messages "read error: SCSI bus reset" and "TMS02 - Volume held"

rtcopy/err_messages: 1.5 96/10/18 14:40:17 by baud 
add killjid

rtcopy/err_messages: 1.4 96/10/07 17:11:17 by baud 
add 4 messages: Command timeout, Aborted command, SCSI bus reset, TP033 - unit

rtcopy/err_messages: 1.3 96/10/07 08:30:21 by baud 
add 2 messages: "unknown cassette in DIR" and "ERROR READING DISK FILE: Connection reset by peer"

rtcopy/err_messages: 1.2 96/09/16 09:24:42 by baud 
add 3 messages for SONY robot

rtcopy/rtcopy.shift: 2.85 96/10/09 08:16:25 by baud 
add missing break which produced endless retries on tpmnt

rtcopy/rtcopyd.c: 2.67 96/09/13 13:30:58 by baud 
change WIFSIGNALED to WTERMSIG and WIFSTOPPED to WSTOPSIG to print the signal number

rtcopy/rtstat.c: 1.9 96/11/11 11:54:25 by baud 
ignore empty error messages (just timestamp and jid) in rtcopy.err

rtcopy/rtstat.c: 1.8 96/10/30 14:48:32 by baud 
ignore messages "sensekey="

rtcopy/rtstat.c: 1.7 96/10/30 10:57:56 by baud 
set all tm_isdst to -1 before calling mktime

rtcopy/rtstat.c: 1.6 96/10/15 18:41:20 by baud 
fix memory leak problem in match_errors; fix memory allocation problem in create_unknown

rtcopy/rtstat.c: 1.5 96/10/07 08:37:24 by baud 
ignore message "EEI status=...."

rtcopy/tpio.c: 1.35 96/12/11 11:04:31 by baud 
add support for IRIX by using sendscsicmd from directory common

rtcopy/tpread.c: 2.64 96/12/03 13:29:55 by baud 
 reset reply buffer length for sysreq before retrying to avoid message "User buffer too small"

sysreq/Imakefile: 1.12 96/10/23 16:31:30 by baud 
suppress -lsun for IRIX6

sysreq/config.h: 1.4 96/12/06 14:53:54 by obarring 
Add sysreq retry parameters.

sysreq/netreq.c: 1.26 96/12/06 14:56:59 by obarring 
Retry in _sysreq. New formal parameter do_retry (0=no retry).

sysreq/sysreq.c: 1.15 96/12/06 14:59:25 by obarring 
Call new _sysreq with do_retry = 1 (do retry).

sysreq/sysreq.man: 1.4 96/12/09 11:58:32 by obarring 
Add information about default retry mechanism.

sysreq/sysreqc.c: 1.11 96/12/06 14:59:58 by obarring 
Call new _sysreq with do_retry = 0 (no retry).

tms/Imakefile: 1.5 96/10/23 16:04:27 by baud 
suppress -lsun for IRIX6

tms/send2tmsd.c: 1.11 96/10/24 13:08:15 by baud 
add support for IRIX5 and IRIX6

tms/sendrep.c: 1.8 96/10/24 12:30:05 by baud 
add support for IRIX5 and IRIX6

tms/tms.h: 1.9 96/11/05 09:34:49 by baud 
change interval to check for jobs that have died to 3 minutes

tms/tmsdaemon.c: 1.31 96/12/07 10:41:43 by baud 
add option no_retry to _sysreq call

tms/tmsdaemon.c: 1.30 96/10/24 13:10:28 by baud 
add support for IRIX5 and IRIX6

config/sgi.cf: 1.4 96/10/23 13:41:22 by baud 
add support for IRIX6

stage/Imakefile: 1.20 96/10/23 16:19:43 by baud 
suppress -lsun for IRIX6

stage/procio.c: 1.21 96/11/04 15:20:14 by baud 
reject stageout/stagewrt requests with -l blp

stage/procio.c: 1.20 96/10/29 17:35:12 by baud 
allow for simultaneous stageout requests with -q n

stage/stage.h: 1.24 96/10/11 17:20:53 by baud 
to avoid problems on Solaris, undef MAXHOSTNAMELEN if set; otherwise procio and stgdaemon see a different format for the structure stgcat

stage/stagealloc.c: 1.5 96/09/02 11:35:55 by boissat 
No retries when 'not enough space' returned

stage/stagealloc.man: 1.6 96/11/21 16:22:59 by boissat 
Possible return code: 28

stage/stageout.man: 1.5 96/12/12 11:31:10 by baud 
document new internal filename if -q n  is specified

stage/stager.c: 1.24 96/12/05 18:27:05 by baud 
avoid to write outside of repbuf

stage/stagewrt.man: 1.5 96/12/12 10:46:15 by baud 
correct example for tar file

stage/stgdaemon.c: 2.20 96/10/29 17:36:28 by baud 
make internal pathname of stageout -qn request unique by adding requestid

copytape/Imakefile: 1.16 96/10/23 16:21:15 by baud 
suppress -lsun for IRIX6

************************ VERSION 1.8.3.26 *****************************
./README: 1.13 96/08/30 09:37:19 by baud 
1.8.3.26 release

common/Imakefile: 1.17 96/08/29 10:52:53 by boissat 
Rule for FILMANDIR added

common/solveln.c: 1.3 96/08/29 14:57:22 by boissat 
Current directory not changed after jumping into 'seelink'

tape/tpusage.c: 1.4 96/08/29 16:18:47 by baud 
correct option -w which did not work when specified with -D or -T

rtcopy/tpclient.c: 1.3 96/08/29 11:42:42 by boissat 
External reference to 'solveln' removed

************************ VERSION 1.8.3.25 *****************************
tape/dmpfil.c: 1.30 96/08/26 15:32:47 by baud 
for sgi and dec, ENOSPC means "Blank check"

rtcopy/Imakefile: 1.31 96/08/28 08:34:03 by baud 
do not create SPOOL, RTCOPYWORKDIR directories if BuildRtcopyServer is not defined

copytape/Imakefile: 1.15 96/08/28 08:42:05 by baud 
do not create SPOOL directory if BuildCopytapeServer is not defined

************************ VERSION 1.8.3.24 *****************************
./Imakefile: 1.11 96/08/23 10:54:21 by baud 
change exportinc to exportsh; include common in the list EXPORTSUBDIRS because of the man pages

./README: 1.12 96/08/23 16:53:30 by baud 
1.8.3.24 release

common/Imakefile: 1.16 96/08/23 11:10:28 by baud 
add rules to export man pages

common/Imakefile: 1.15 96/08/22 10:12:47 by baud 
install man page for /etc/account file in man4 instead of man3

h/Imakefile: 1.5 96/08/23 08:06:02 by baud 
change exportinc to exportshr

lib/Imakefile: 1.6 96/08/23 08:32:25 by baud 
change exportinc to exportshr

rfio/Imakefile: 1.36 96/08/23 08:34:13 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr

rtcopy/Imakefile: 1.30 96/08/23 10:38:30 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportsh; export err_messages to the shared (instead of platform specific) directory

rtcopy/rtstat.c: 1.4 96/08/21 16:10:52 by baud 
ignore requests completed with rc=222 (reselect server)

sysreq/Imakefile: 1.11 96/08/23 08:36:59 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr

dpm/Imakefile: 1.4 96/08/23 08:14:54 by baud 
change exportinc to exportshr

dpm/h/Imakefile: 1.4 96/08/23 08:19:45 by baud 
change exportinc to exportshr

dpm/util/Imakefile: 1.6 96/08/23 08:24:29 by baud 
change exportinc to exportshr

dpm/parser/Imakefile: 1.9 96/08/23 08:23:11 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr

dpm/dpm/Imakefile: 1.14 96/08/23 08:29:14 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr

dpm/dpm/Imakefile: 1.13 96/08/21 15:41:34 by boissat 
Fix for installation of man pages without nroff

commands/Imakefile: 1.6 96/08/23 08:08:45 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr

config/Imake.tmpl: 1.5 96/08/22 10:09:41 by baud 
add directory for man pages describing shift special files

config/Imake.tmpl: 1.4 96/08/21 16:41:54 by baud 
use sh5 as shell for makefile execution on ultrix platforms

config/Library.tmpl: 1.8 96/08/23 07:38:57 by baud 
change BuildStageServer to BuildStage4TapeServer

config/Project.tmpl: 1.9 96/08/23 07:37:11 by baud 
change BuildStageServer to BuildStage4TapeServer

config/site.def: 1.24 96/08/23 07:35:32 by baud 
change BuildStageServer to BuildStage4TapeServer

config/site.def: 1.23 96/08/22 10:07:25 by baud 
add directory for man pages describing shift special files

stage/Imakefile: 1.19 96/08/23 08:01:36 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr; do not create SPOOL directory if BuildStageDaemon is not defined; suppress definition of REQPIPE (not used)

stage/stageclr.c: 1.11 96/08/23 16:46:01 by baud 
continue scanning parameters even after error on -L or -P option

copytape/Imakefile: 1.14 96/08/23 08:11:04 by baud 
change EXPORTMAN to EXPORTMAN/man1; change exportinc to exportshr

************************ VERSION 1.8.3.23 *****************************
./README: 1.11 96/08/19 15:32:40 by baud 
1.8.3.23 release

./setosflags: 1.2 96/08/19 13:40:51 by baud 
suppress leading zero in release number on hpux (cpp dislike it)

rtcopy/Imakefile: 1.29 96/08/19 15:17:17 by baud 
fix problem in export or rtstat data file

scripts/Imakefile: 1.6 96/08/19 12:12:59 by baud 
install DPMstagein/DPMstageout only if BuildDpm was set to YES

config/Library.tmpl: 1.7 96/08/19 11:49:34 by baud 
do not force BuildDpm if BuildScripts is set to YES

config/Project.tmpl: 1.8 96/08/19 11:50:38 by baud 
do not force BuildDpm if BuildScripts is set to YES

************************ VERSION 1.8.3.22 *****************************
./Makefile.ini: 1.3 96/08/16 11:10:22 by baud 
set SHELL to /bin/sh to overwrite environment variable (because of IRIX)

************************ VERSION 1.8.3.21 *****************************
./README: 1.10 96/08/15 15:02:00 by baud 
1.8.3.21 release

rfio/connect.c: 3.12 96/08/15 15:00:22 by baud 
suppress warning messages at compilation time under Solaris

rtcopy/Imakefile: 1.28 96/08/15 11:29:17 by baud 
correct filename of rtstat data file

rtcopy/rtcopyd.c: 2.66 96/08/15 14:16:08 by baud 
suppress warning message at compilation time under Solaris

rtcopy/rtstat.c: 1.3 96/08/15 12:11:19 by baud 
add byte swapping for rtcopy accounting records if necessary (DEC-non DEC)

************************ VERSION 1.8.3.20 *****************************
./README: 1.9 96/08/15 09:16:25 by baud 
1.8.3.20 release

rtcopy/rtstat.c: 1.2 96/08/15 08:43:51 by baud 
avoid crash on DEC systems if -S specifies the only server present on a TPSERV line in shift.conf; add a newline so the prompt is ok even if there is no error for the last server

************************ VERSION 1.8.3.19 *****************************
h/rfio.h: 3.30 96/08/14 10:45:10 by boissat 
Port to HPUX-10.10

tape/tpusage.man: 1.3 96/08/13 10:09:56 by baud 
minor mods to page layout

rfio/Imakefile: 1.35 96/08/14 08:41:50 by hemmer 
Added rfstat in programs to build & install

rfio/rfio_calls.c: 3.39 96/08/14 10:43:26 by boissat 
Port to HPUX-10.10

rtcopy/rtstat.man: 1.2 96/08/13 11:35:20 by baud 
modify example layout to match the code

config/hp.cf: 1.5 96/08/14 12:02:06 by baud 
add HPUX1010 flag

************************ VERSION 1.8.3.18 *****************************
./Imakefile: 1.10 96/08/05 15:13:13 by baud 
find automatically OSMajorVersion and OSMinorVersion

./Makefile.ini: 1.2 96/08/05 15:15:53 by baud 
find automatically BOOTSTRAPCFLAGS, OSMajorVersion and OSMinorVersion

./README: 1.8 96/08/13 06:50:26 by baud 
1.8.3.18 release

NEW file: ./setosflags(1.1)
./setosflags: 1.1 96/08/05 15:21:19 by baud 
date and time created 96/08/05 15:21:19 by baud

h/sacct.h: 1.8 96/08/07 15:54:11 by baud 
remove fields dsksrvr_len and clienthost_len from structure acctrtcp because they are not useful

fhs/checkjobdied.c: 1.7 96/08/07 11:30:09 by baud 
Port to HPUX-10.10

fhs/fhsdaemon.c: 1.15 96/08/12 09:27:21 by boissat 
Port to HPUX-10.10 (setpgrp)

fhs/findpgrp.c: 1.7 96/08/05 10:50:23 by baud 
Port to HPUX-10.10

msg/term.c: 1.9 96/08/12 09:44:11 by boissat 
Port to HPUX-10.10 (setpgrp)

tape/Imakefile: 1.28 96/08/08 14:34:35 by baud 
add man page tape_oper (operator interface to tape subsystem)

tape/dmpfil.c: 1.29 96/08/08 10:08:35 by baud 
tape read errors were not logged in rtcopy.err

tape/findpgrp.c: 1.15 96/08/05 10:21:12 by baud 
correct code for HPUX10 (was always returning pid of inetd in interactive)

NEW file: tape/tape_oper.man(1.1)
tape/tape_oper.man: 1.1 96/08/08 14:10:25 by baud 
date and time created 96/08/08 14:10:25 by baud

tape/tpdaemon.c: 1.69 96/08/12 09:46:55 by boissat 
 Port to HPUX-10.10 (setpgrp)

tape/tpusage.c: 1.3 96/08/12 11:17:18 by baud 
correct option -f (which was ignored); add option -w week_number

tape/tpusage.c: 1.2 96/08/07 09:15:18 by baud 
if -D and -T options were both specified, numbers were doubled

tape/tpusage.man: 1.2 96/08/12 11:53:33 by baud 
add option -w week_number

rfio/rfio_serv.c: 3.38 96/08/12 09:28:50 by boissat 
Port to HPUX-10.10 (setpgrp)

rtcopy/Imakefile: 1.27 96/08/12 11:40:16 by baud 
add rtstat program and man page

NEW file: rtcopy/err_messages(1.1)
rtcopy/err_messages: 1.1 96/08/12 13:12:33 by baud 
date and time created 96/08/12 13:12:33 by baud

rtcopy/rtcopy.awk: 2.5 96/08/01 16:32:30 by boissat 
More restrictions on file sequence numbers lists

rtcopy/rtcopy.shift: 2.84 96/08/01 16:26:36 by boissat 
More restrictions on file sequence numbers lists

rtcopy/rtcopyd.c: 2.65 96/08/12 09:34:30 by boissat 
Port to HPUX-10.10 (setpgrp)

rtcopy/rtcopyd.c: 2.64 96/08/08 16:32:50 by baud 
rewrite filter routine so that each line in rtcopy.err has a timestamp

rtcopy/rtcopyd.c: 2.63 96/08/07 14:31:51 by baud 
add accounting to killjob routine, so that an accounting record is also produced for request aborted by user or netread error for example; give the message command failed in rtcopyd.log also in case of request aborted by user

rtcopy/rtcopyerr.h: 1.9 96/08/07 11:51:29 by baud 
add message RT005 "fork() failed:"

rtcopy/rtcpacct.c: 1.3 96/08/07 16:24:21 by baud 
remove fields dsksrvr_len and clienthost_len from structure acctrtcp because they are not useful; write variable length records

NEW file: rtcopy/rtstat.c(1.1)
rtcopy/rtstat.c: 1.1 96/08/13 06:46:53 by baud 
date and time created 96/08/13 06:46:53 by baud

NEW file: rtcopy/rtstat.man(1.1)
rtcopy/rtstat.man: 1.1 96/08/12 11:40:40 by baud 
date and time created 96/08/12 11:40:40 by baud

rtcopy/tpsinfod.c: 1.4 96/08/12 09:50:45 by boissat 
Port to HPUX-10.10 (setpgrp)

rtcopy/tptodkF.c: 2.39 96/08/08 07:33:33 by baud 
correct message RT147

rtcopy/tptodkU.c: 2.30 96/08/08 07:35:32 by baud 
correct message RT147

tms/findpgrp.c: 1.8 96/08/05 10:32:42 by baud 
correct code for HPUX10 (was always returning pid of inetd in interactive mode)

tms/tmsdaemon.c: 1.29 96/08/12 09:48:03 by boissat 
Port to HPUX-10.10 (setpgrp)

config/alpha_osf.cf: 1.2 96/08/05 15:23:15 by baud 
use OSMajorVersion

config/hp.cf: 1.4 96/08/05 15:24:18 by baud 
use OSMajorVersion

config/sun.cf: 1.3 96/08/05 15:26:04 by baud 
use OSMinorVersion

stage/poolmgr.c: 1.21 96/07/29 15:30:03 by boissat 
Time window problem fixed when forking

stage/stgdaemon.c: 2.19 96/08/12 09:45:27 by boissat 
Port to HPUX-10.10 (setpgrp)

stage/stgdaemon.c: 2.18 96/07/29 15:32:37 by boissat 
Time window problem fixed when forking

copytape/ctpdaemon.c: 1.13 96/08/12 09:25:41 by boissat 
Port to HPUX-10.10 (setpgrp)

copytape/ctpdaemon.c: 1.12 96/07/29 15:27:18 by boissat 
Time window problem fixed when forking

************************ VERSION 1.8.3.17 *****************************
h/rfio.h: 3.29 96/07/12 09:41:39 by boissat 
Port to HPUX-10.10

h/sacct.h: 1.7 96/07/09 09:53:09 by boissat 
acctrtcp.size declared as 'int'

tape/checkjobdied.c: 1.12 96/07/12 10:07:50 by boissat 
Port to HPUX-10.10

tape/dmpfil.c: 1.28 96/07/02 08:07:27 by baud 
fix compilation error introduced by previous mod (sun only)

tape/findpgrp.c: 1.14 96/07/19 07:48:46 by boissat 
Port to HPUX-10.10

tape/mounttape.c: 1.74 96/07/05 15:52:26 by baud 
add code for Solaris 2.5

tape/skiptape.c: 1.10 96/07/05 11:29:05 by baud 
add code for Digital Unix V4

tape/tperror.c: 1.14 96/07/05 11:28:14 by baud 
add code for Digital Unix V4

tape/tpmnt.man: 1.20 96/06/27 12:26:01 by baud 
add option -E ignoreeoi

rfio/rfio_calls.c: 3.38 96/07/12 09:44:14 by boissat 
Port to HPUX-10.10

rtcopy/rtcpacct.c: 1.2 96/07/09 09:54:19 by boissat 
acctrtcp.size declared as 'int'

tms/checkjobdied.c: 1.11 96/07/12 10:03:30 by boissat 
Port to HPUX-10.10

tms/findpgrp.c: 1.7 96/07/19 07:49:55 by boissat 
Port to HPUX-10.10

stage/Imakefile: 1.18 96/07/12 15:02:48 by boissat 
'stageclr' depending also on 'buildupath.o'

stage/cleaner.c: 1.6 96/07/09 15:48:23 by boissat 
Cleaner called with a second parameter: hostname

stage/poolmgr.c: 1.20 96/07/09 10:26:20 by boissat 
Cleaner called with a second parameter: hostname

stage/poolmgr.c: 1.19 96/07/08 14:07:24 by boissat 
Default pool name displayed in 'stageqry -s'

stage/procqry.c: 1.9 96/07/08 14:07:04 by boissat 
Default pool name displayed in 'stageqry -s'

stage/stageclr.c: 1.10 96/07/12 15:07:15 by boissat 
'-L relative-link-name' corrected

stage/stageinit.c: 1.4 96/07/08 14:12:00 by boissat 
No retries in case of configuration errors

stage/stgdaemon.c: 2.17 96/07/08 15:14:40 by boissat 
'nomorestage' to block 'stagealloc' requests

stage/stgdaemon.c: 2.16 96/07/08 14:55:33 by boissat 
Message displayed in case of configuration errors in 'stageinit'

************************ VERSION 1.8.3.16 *****************************
./README: 1.7 96/06/25 16:21:42 by baud 
1.8.3.16 release

tape/Imakefile: 1.27 96/06/24 16:49:44 by baud 
install man page for tpusage

tape/Imakefile: 1.26 96/06/12 14:32:45 by boissat 
'tpusage' installed with mode 755

tape/dmpfil.c: 1.27 96/06/13 13:33:57 by baud 
correctly set min_block_length even if the first block has a parity error

tape/lddisplay.c: 1.7 96/06/14 16:14:41 by baud 
add support for SOLARIS

tape/mounttape.c: 1.73 96/06/20 14:45:47 by baud 
add option -E ignoreeoi

tape/nextvol.c: 1.5 96/06/24 09:51:53 by baud 
check on getcwd return code

tape/posittape.c: 1.27 96/06/20 14:54:38 by baud 
add option -E ignoreeoi; accept files with parity error in first block

tape/readlbl.c: 1.17 96/06/20 13:21:46 by baud 
return detailed error code in case of I/O error

tape/rls.c: 1.13 96/06/24 09:55:44 by baud 
check on getcwd return code

tape/rwndtape.c: 1.8 96/06/19 16:04:55 by baud 
returns detailed error code in case of I/O error

tape/skiptape.c: 1.9 96/06/19 16:09:30 by baud 
return detailed error code in case of I/O error

tape/tape.h: 1.51 96/06/19 15:59:13 by baud 
add option -E ignoreeoi

tape/tpdaemon.c: 1.68 96/06/19 16:02:12 by baud 
add option -E ignoreeoi

tape/tperror.c: 1.13 96/06/24 14:08:58 by baud 
give detailed error code instead of EIO; recognize EMEDIA on AIX platforms

tape/tpinfo.c: 1.2 96/06/17 14:48:03 by baud 
add check on getcwd return code

tape/tpmnt.c: 1.28 96/06/24 09:47:34 by baud 
add option -E ignoreeoi; check on getcwd return code

tape/tpmnt.man: 1.19 96/06/19 15:56:17 by baud 
document new detailed exit codes in case of I/O error while positioning

tape/unldtape.c: 1.8 96/06/19 16:11:22 by baud 
return detailed error code in case of I/O error

tape/writelbl.c: 1.7 96/06/19 17:08:59 by baud 
return detailed error code in case of I/O error

tape/wrttpmrk.c: 1.8 96/06/19 17:10:24 by baud 
return detailed error code in case of I/O error

rtcopy/rtcopy.shift: 2.83 96/06/19 15:38:03 by baud 
add option -E ignoreeoi; process new tpmnt return codes

rtcopy/tpread.man: 1.17 96/06/17 13:30:12 by baud 
document option -E ignoreeoi

stage/Imakefile: 1.17 96/06/17 10:01:52 by baud 
suppress -f $(MAKEFILE) on make calls

stage/procio.c: 1.19 96/06/17 11:18:45 by baud 
add processing of option -E ignoreeoi

stage/stage.h: 1.23 96/06/17 11:14:47 by baud 
define flag IGNOREEOI (do not take 2 consecutive TMs as EOI)

stage/stagein.man: 1.24 96/06/17 11:30:18 by baud 
document option -E ignoreeoi

stage/stager.c: 1.23 96/06/17 11:17:31 by baud 
add processing of option -E ignoreeoi

copytape/Imakefile: 1.13 96/06/17 10:02:32 by baud 
suppress -f $(MAKEFILE) on make calls

copytape/copytape.h: 1.10 96/06/17 14:57:31 by boissat 
Fair-share scheduler introduced

copytape/ctpdaemon.c: 1.11 96/06/18 08:44:11 by boissat 
Fair-share scheduler introduced

copytape/tpcpin.ksh: 1.2 96/06/12 14:59:56 by boissat 
Job control improved

copytape/tpcpout.ksh: 1.3 96/06/12 15:00:44 by boissat 
Job control improved

copytape/tpcpout.ksh: 1.2 96/06/12 10:04:05 by boissat 
Debugging statements removed

************************ VERSION 1.8.3.15 *****************************
common/Imakefile: 1.14 96/06/10 10:42:07 by boissat 
Build module 'getarghp.o' only when Fortran examples are required

common/Imakefile: 1.13 96/05/30 11:17:41 by boissat 
'mkdir' changed into 'mkdir -p'

h/Imakefile: 1.4 96/05/30 11:43:33 by boissat 
'mkdir' changed into 'mkdir -p'

lib/Imakefile: 1.5 96/05/30 11:20:51 by boissat 
'mkdir' changed into 'mkdir -p'

fhs/Imakefile: 1.4 96/05/30 11:19:15 by boissat 
'mkdir' changed into 'mkdir -p'

fhs/findpgrp.c: 1.6 96/06/07 16:14:47 by baud 
add check on sysconfig return code (AIX only)

msg/Imakefile: 1.6 96/05/30 11:21:33 by boissat 
'mkdir' changed into 'mkdir -p'

tape/Imakefile: 1.25 96/05/30 11:25:40 by boissat 
'mkdir' changed into 'mkdir -p'

tape/findpgrp.c: 1.13 96/06/07 16:02:25 by baud 
add check on sysconfig return code (AIX only)

tape/mounttape.c: 1.72 96/06/07 10:10:35 by baud 
send reopen error message to the user log

rfio/Imakefile: 1.34 96/06/11 13:47:28 by boissat 
'rfcp' depending on 'librfio.a'

rfio/Imakefile: 1.33 96/06/11 12:06:49 by boissat 
Added EMANPAGE macro for exported man pages

rfio/Imakefile: 1.32 96/05/30 11:22:17 by boissat 
'mkdir' changed into 'mkdir -p'

rfio/parse.c: 3.15 96/06/11 11:00:34 by fabien 
Corrected a problem with Unix->VMS symbolic links introduced in the previous version

rfio/rfcp.c: 1.13 96/05/30 10:49:14 by boissat 
External declarations added (getenv+malloc)

rtcopy/Imakefile: 1.26 96/06/11 12:08:25 by boissat 
Added EMANPAGE macro for exported man pages

rtcopy/Imakefile: 1.25 96/05/30 11:23:10 by boissat 
'mkdir' changed into 'mkdir -p'

sysreq/Imakefile: 1.10 96/06/11 12:10:07 by boissat 
Added EMANPAGE macro for exported man pages

sysreq/Imakefile: 1.9 96/05/30 11:24:49 by boissat 
'mkdir' changed into 'mkdir -p'

tms/Imakefile: 1.4 96/05/30 11:26:21 by boissat 
'mkdir' changed into 'mkdir -p'

tms/findpgrp.c: 1.6 96/06/07 16:10:01 by baud 
add check on sysconfig return code (AIX only)

dpm/parser/Imakefile: 1.8 96/05/30 11:27:33 by boissat 
'mkdir' changed into 'mkdir -p'

dpm/dpm/Imakefile: 1.12 96/05/30 11:26:59 by boissat 
'mkdir' changed into 'mkdir -p'

commands/Imakefile: 1.5 96/06/11 11:57:22 by boissat 
Added EMANPAGE macro for exported man pages

commands/Imakefile: 1.4 96/05/30 11:09:58 by boissat 
'mkdir' changed into 'mkdir -p'

config/Imake.rules: 1.5 96/06/11 11:56:23 by boissat 
Added EMANPAGE macro for exported man pages

config/Imake.rules: 1.4 96/05/30 11:45:55 by boissat 
'mkdir' changed into 'mkdir -p'

stage/Imakefile: 1.16 96/06/11 13:37:29 by boissat 
Added EMANPAGE macro for exported man pages

stage/Imakefile: 1.15 96/05/30 11:24:10 by boissat 
'mkdir' changed into 'mkdir -p'

stage/packfseq.c: 1.5 96/06/05 15:33:13 by baud 
correct code for file concatenation in stagewrt

stage/procio.c: 1.18 96/06/05 14:36:59 by baud 
check validity of option -q value; it must be positive, non null and in a range, 2nd value must be > 1st value

copytape/Imakefile: 1.12 96/06/11 13:45:56 by boissat 
'tpcp*.ksh' scripts introduced

copytape/Imakefile: 1.11 96/06/11 13:40:42 by boissat 
Added EMANPAGE macro for exported man pages

copytape/Imakefile: 1.10 96/05/30 11:18:37 by boissat 
'mkdir' changed into 'mkdir -p'

copytape/copytape.h: 1.9 96/06/07 15:16:20 by boissat 
New state 'REQSIGD' : request signalled

copytape/ctpdaemon.c: 1.10 96/06/07 16:06:40 by boissat 
Fix dealing with number of running requests

copytape/ctpdaemon.c: 1.9 96/06/07 09:22:37 by boissat 
'copytape -Q' echoed in log file & request-id displayed

copytape/ctpdaemon.c: 1.8 96/05/30 10:54:39 by boissat 
Requests counter (reqid) corrected

copytape/tpcopy.c: 1.8 96/06/10 14:11:07 by boissat 
'tpcp*.ksh' scripts introduced

NEW file: copytape/tpcpin.ksh(1.1)
copytape/tpcpin.ksh: 1.1 96/06/10 14:20:12 by boissat 
date and time created 96/06/10 14:20:12 by boissat

NEW file: copytape/tpcpout.ksh(1.1)
copytape/tpcpout.ksh: 1.1 96/06/10 14:20:59 by boissat 
date and time created 96/06/10 14:20:59 by boissat

************************ VERSION 1.8.3.14 *****************************
./README: 1.6 96/05/28 09:22:57 by hemmer 
1.8.3.14 release

examples/Imakefile: 1.9 96/05/23 12:44:09 by hemmer 
rfstat now moved in rfio

tape/dmpfil.c: 1.26 96/05/23 14:04:33 by baud 
add option -E ignoreeoi; correct option -N; decode ebcdic labels if found at beginning of any file (even if the tape does not start with a label)

tape/dumptape.man: 1.5 96/05/23 21:28:46 by baud 
add option -E ignoreeoi

tape/dumptape.sh: 1.15 96/05/23 13:57:13 by baud 
add option -E ignoreeoi

tape/tpmnt.c: 1.27 96/05/23 11:35:53 by baud 
suppress message "TMS02 - Volume busy" from user log

rfio/Imakefile: 1.31 96/05/23 12:44:17 by hemmer 
rfstat now moved in rfio

rfio/rfcp.c: 1.12 96/05/28 09:54:22 by hemmer 
Dynamic local buffer sizes, and VMS support added.

NEW file: rfio/rfstat.c(1.3)
rfio/rfstat.c: 1.3 91/05/15 15:03:42 by hemmer 
RFIO VERSION 2

rfio/write.c: 3.6 96/05/23 10:48:55 by hemmer 
lseek how was not reset, causing reposition after each write !

rtcopy/dumptape.c: 1.4 96/05/23 15:54:04 by baud 
add option -E ignoreeoi

DELETED file : examples/rfstat.c (1.3)
************************ VERSION 1.8.3.13 *****************************
rfio/parse.c: 3.14 96/05/14 07:41:00 by fabien 
Added support for relative symbolic links with hostname:/path form

rfio/parse.c: 3.13 96/05/13 20:21:51 by fabien 
Corrected bug with relative pathnames in symbolic links in rfio_parseln routine

************************ VERSION 1.8.3.12 *****************************
rtcopy/tpread.man: 1.16 96/05/03 14:45:09 by baud 
suppress spaces after commas in series of file sequence numbers

stage/stagecat.man: 1.4 96/05/03 14:43:23 by baud 
suppress spaces after commas in series of file sequence numbers

stage/stagein.man: 1.23 96/05/03 14:42:17 by baud 
suppress spaces after commas in series of file sequence numbers

copytape/copytape.man: 1.12 96/05/03 14:30:15 by baud 
suppress spaces after commas in series of file sequence numbers

************************ VERSION 1.8.3.11 *****************************
rtcopy/rtcopyd.c: 2.62 96/04/29 08:26:06 by baud 
avoid warning messages at compilation time on Solaris platforms

rtcopy/tpread.c: 2.63 96/04/30 08:26:45 by baud 
correct again dynamic allocation of dirpath

stage/stageget.c: 1.2 96/04/30 10:59:54 by baud 
check errflg and abort command if parameter error

************************ VERSION 1.8.3.10 *****************************
tape/mounttape.c: 1.71 96/04/23 14:18:01 by baud 
configure drive down if qmid reports "Device no longer available"

tape/rbtsubr.c: 1.8 96/04/23 15:07:00 by baud 
let qmid return positive value if "Device no longer available"

rfio/rfio_serv.c: 3.37 96/04/26 09:04:06 by acher 
getdtablesize() not known by sysV libraries on SOLARIS with compiler /opt/SUNWspro/bin/cc .

rtcopy/tpread.c: 2.62 96/04/26 16:01:00 by baud 
correct dinamic allocation of dirpath array; it was not working for realative paths

stage/Imakefile: 1.14 96/04/23 09:47:22 by baud 
add rule for stageget man page

************************ VERSION 1.8.3.9 *****************************
./README: 1.5 96/04/22 13:39:22 by baud 
1.8.3.9 release

fhs/checkjobdied.c: 1.6 96/04/03 17:09:46 by baud 
correct for HPUX: an active job must have p_stat != 0

tape/Imakefile: 1.24 96/04/04 16:35:08 by baud 
add tpusage command and man page

tape/checkjobdied.c: 1.11 96/04/03 17:04:52 by baud 
correct for HPUX: an active job must have p_stat != 0

tape/dmpfil.c: 1.25 96/04/19 08:43:23 by baud 
Detect correctly "blank check" on sun platforms and terminate dump

tape/dumptape.sh: 1.14 96/04/22 08:05:00 by baud 
allow to dump a tape which starts with a tape mark

tape/mounttape.c: 1.70 96/04/18 08:39:29 by baud 
if reselect drive, sends new drive name to TMS, otherwise a cancel after reselect does not free the volume in TMS

tape/mounttape.c: 1.69 96/04/04 07:45:11 by baud 
send an operator message and configure drive down if openlmcp fails

tape/rbtsubr.c: 1.7 96/04/19 09:14:31 by baud 
log qmid3495 return code if non zero

tape/rbtsubr.c: 1.6 96/04/04 07:43:12 by baud 
return positive value if openlmcp fails (drive not operational)

tape/tperror.c: 1.12 96/04/19 08:45:56 by baud 
change errcat for EOT hit on sun platforms from ETUNREC to ETBLANK

NEW file: tape/tpusage.c(1.1)
tape/tpusage.c: 1.1 96/04/15 15:18:06 by baud 
date and time created 96/04/15 15:18:06 by baud

NEW file: tape/tpusage.man(1.1)
tape/tpusage.man: 1.1 96/04/15 15:21:46 by baud 
date and time created 96/04/15 15:21:46 by baud

rtcopy/rtcopyerr.h: 1.8 96/04/19 10:44:33 by baud 
add BLOCK # to message RT118

rtcopy/tpio.c: 1.34 96/04/19 10:48:15 by baud 
on sun platforms, a "blank check" while reading is reported as SC_EOT

rtcopy/tpio.c: 1.33 96/04/12 13:51:01 by baud 
if -E keep is specified and tape void or blank tape is found after some blocks, exit 195 so that the stager keeps the file

rtcopy/tpread.man: 1.15 96/04/22 13:52:01 by baud 
add option -s and multiple values for option -N

tms/checkjobdied.c: 1.10 96/04/03 17:06:28 by baud 
correct for HPUX: an active job must have p_stat != 0

tms/tmsdaemon.c: 1.28 96/04/18 08:44:25 by baud 
check for type TMLOCK and drive unset to decide if the request was already waiting for busy volume

tms/tmsdaemon.c: 1.27 96/04/04 17:22:36 by baud 
add savereqs when processing UNLOCKB requests

stage/Imakefile: 1.13 96/04/18 11:27:07 by baud 
add comand stageget and its man page; add dependencies for stagealloc and stageinit

stage/cleaner.c: 1.5 96/04/18 11:28:30 by baud 
don't use ENTRY macro

stage/poolmgr.c: 1.18 96/04/04 11:32:11 by baud 
put a declaration for getconfent

stage/procalloc.c: 1.5 96/04/18 13:46:24 by baud 
add routine procgetreq for STAGEGET processing

stage/procqry.c: 1.8 96/04/18 13:51:42 by baud 
add processing of -A option

stage/stage.h: 1.22 96/04/18 11:32:06 by baud 
suppress unused macros ENTRY and RETURN; add request type STAGEGET

stage/stage.man: 1.2 96/04/22 08:47:45 by baud 
add command stageget

NEW file: stage/stageget.c(1.1)
stage/stageget.c: 1.1 96/04/18 11:33:13 by baud 
date and time created 96/04/18 11:33:13 by baud

NEW file: stage/stageget.man(1.1)
stage/stageget.man: 1.1 96/04/18 11:33:30 by baud 
date and time created 96/04/18 11:33:30 by baud

stage/stageqry.c: 1.7 96/04/18 14:14:01 by baud 
add option -A

stage/stageqry.man: 1.11 96/04/18 11:39:18 by baud 
add option -A; add poolname to stageqry output examples

stage/stager.c: 1.22 96/04/18 11:29:37 by baud 
don't use ENTRY macro

stage/stgdaemon.c: 2.15 96/04/18 11:55:21 by baud 
add call to procgetreq for STAGEGET processing

stage/stgdaemon.c: 2.14 96/04/15 10:43:27 by baud 
do not send control back to the client if overlay still executing to avoid mount requests for a volume still in rewind/unload

DELETED file : stage/stgdaemon.c.pro (1.30)
************************ VERSION 1.8.3.8 *****************************
rtcopy/rtcopy.shift: 2.82 96/03/28 15:49:33 by acher 
HPUX10's sh does not appreciate comparisons with a figure of a string.

rtcopy/rtcopy.shift: 2.81 96/03/28 15:19:03 by acher 
-N 1:2:.... made possible , as for -s.

stage/Imakefile: 1.12 96/03/28 16:49:33 by baud 
add command stagestat and its man page

stage/procio.c: 1.17 96/03/29 09:27:30 by baud 
accept series of values for -N option

stage/stagein.man: 1.22 96/03/29 09:42:26 by baud 
accept series of values for -N option

stage/stageout.man: 1.4 96/03/29 09:44:00 by baud 
accept series of values for -N option

stage/stager.c: 1.21 96/03/29 09:36:06 by baud 
accept series of values for -N option

NEW file: stage/stagestat.c(1.1)
stage/stagestat.c: 1.1 96/03/28 16:46:37 by baud 
date and time created 96/03/28 16:46:37 by baud

NEW file: stage/stagestat.man(1.1)
stage/stagestat.man: 1.1 96/04/01 11:27:29 by baud 
date and time created 96/04/01 11:27:29 by baud

stage/stagewrt.man: 1.4 96/03/29 09:43:51 by baud 
accept series of values for -N option

copytape/copytape.man: 1.11 96/04/01 08:44:49 by baud 
prettier example outputs

************************ VERSION 1.8.3.7 *****************************
msg/Imakefile: 1.5 96/03/27 10:32:38 by baud 
termcap is not part of AIX4 standard distribution and curses is enough

tape/dmpfil.c: 1.24 96/03/27 17:07:19 by baud 
tidy up the messages

tape/mounttape.c: 1.68 96/03/27 14:24:11 by baud 
if volume busy, release lock in TMS

tape/mounttape.c: 1.67 96/03/22 15:02:09 by baud 
add pid of mounttape overlay to OVLEND request

tape/tape.h: 1.50 96/03/27 14:22:05 by baud 
add constants VOLBSYRI and ETVBSY for new processing of volume busy

tape/tape.h: 1.49 96/03/22 15:01:21 by baud 
add pid of mounttape overlay to OVLEND request

tape/tpdaemon.c: 1.67 96/03/27 14:28:00 by baud 
place requests in waitq according to retry number

tape/tpdaemon.c: 1.66 96/03/22 15:04:53 by baud 
reset mntovly_pid to zero only if the drive has not been reassigned in between; add a message in the log when killing a process

tape/tplabel.c: 1.10 96/03/27 14:25:33 by baud 
retry request after VOLBSYRI if volume busy

tape/tplabel.man: 1.6 96/03/19 10:39:49 by baud 
add option -H

tape/tpmnt.c: 1.26 96/03/27 14:26:45 by baud 
retry request after VOLBSYRI if volume busy

tape/tpstat.man: 1.2 96/03/19 10:41:23 by baud 
add timestamp of drive assignment

rfio/rfio_serv.c: 3.36 96/03/20 15:25:25 by acher 
on SOLARIS, kernel is SYSV, using sigaction rather than signal() .

rtcopy/dumptape.c: 1.3 96/03/22 09:39:26 by baud 
accept options -b and -d as for the standalone version of dumptape

rtcopy/tpread.c: 2.61 96/03/21 08:54:32 by baud 
fix problem introduced by mod 2.60; allocates dynamically dirpath

rtcopy/tptodkF.c: 2.38 96/03/20 17:50:50 by acher 
I/O could be local...in this case work on errno.

tms/tms.h: 1.8 96/03/27 14:04:51 by baud 
remove definition of TMVOLBSYRI and add definition of TMUNLOCKB for new processing of volumes busy

tms/tmsdaemon.c: 1.26 96/03/27 14:18:24 by baud 
process new request TMUNLOCKB to unlock volume in TMS but mark the request as waiting in tmsdaemon catalog; do not send MOUNT CANCEL if job dies; let mounttape request it

tms/tmsexit.c: 1.9 96/03/27 14:06:26 by baud 
do not retry if volume busy but returns ETVBSY

stage/poolmgr.c: 1.17 96/03/21 09:47:40 by baud 
allow stageinit to run while a cleaner is executing

stage/stage.h: 1.21 96/03/27 07:28:26 by baud 
allow space for 6 characters for fseq (SONY locate)

************************ VERSION 1.8.3.6 *****************************
common/remote.c: 1.6 96/03/12 18:12:16 by acher 
 on AIX, change way of scrolling in ifr structure.

fhs/checkjobdied.c: 1.5 96/03/18 16:04:15 by baud 
add support for AIX 4

fhs/findpgrp.c: 1.5 96/03/18 16:10:33 by baud 
add support for AIX 4

tape/checkjobdied.c: 1.10 96/03/18 13:38:55 by baud 
add support for AIX 4

tape/findpgrp.c: 1.12 96/03/18 13:40:28 by baud 
add support for AIX 4

tape/mounttape.c: 1.66 96/03/18 13:31:10 by baud 
write only VOL1, write VOL1+HDR1 or VOL1+HDR1+HDR2 according to the option -H of tplabel

tape/posittape.c: 1.26 96/03/05 08:46:24 by baud 
Give message "Bad label structure" instead of "I/O error" if file missing in the middle of a tape

tape/tape.h: 1.48 96/03/18 13:27:15 by baud 
add message TP048 for deferred config; add timestamp to structures tptab and tpstr

tape/tpdaemon.c: 1.65 96/03/18 13:36:11 by baud 
deferred config of drive if currently assigned; add timestamp of drive assignment in tpstat output; do not configure drive up if Adstar open returns EIO

tape/tplabel.c: 1.9 96/03/18 13:33:03 by baud 
accept option -H to write only VOL1, write VOL1+HDR1 or VOL1+HDR1+HDR2

tape/tpstat.c: 1.8 96/03/18 13:28:43 by baud 
add timestamp of drive assignment

rfio/pclose.c: 1.3 96/02/27 11:30:38 by acher 
Local case was buggy

rfio/popen.c: 1.6 96/02/27 11:28:16 by acher 
 Local case was buggy.

rfio/pread.c: 1.4 96/02/27 11:29:29 by acher 
Local case was buggy.

rtcopy/tptodkF.c: 2.37 96/03/18 10:57:27 by baud 
read one block if blksize specified greater than RTCOPYBUFFER NBPAGES or DEFNBPAGES; do not round blksize up to the next multiple of 4096 to avoid ILI on each block which slows down the transfer

tms/checkjobdied.c: 1.9 96/03/18 13:42:35 by baud 
add support for AIX 4

tms/findpgrp.c: 1.5 96/03/18 13:52:03 by baud 
add support for AIX 4

stage/procclr.c: 1.6 96/03/13 15:48:57 by baud 
add uid and gid to delfile arguments for accounting purpose

stage/procio.c: 1.16 96/03/13 15:50:26 by baud 
add uid and gid to delfile arguments for accounting purpose

stage/procupd.c: 1.10 96/03/13 15:45:08 by baud 
add uid and gid to delfile arguments for accounting purpose

stage/procupd.c: 1.9 96/02/27 15:39:23 by baud 
put also an entry in accounting file when a stageupdc command is received

stage/stgdaemon.c: 2.13 96/03/13 15:54:44 by baud 
add uid and gid to delfile arguments for accounting purpose; fixe problem of several multifile requests for same tapefiles and a stageclr is issued for one of these files

copytape/copytape.man: 1.10 96/03/14 15:31:15 by baud 
add example of SPLIT

copytape/tpcopy.c: 1.7 96/03/14 13:25:55 by baud 
stgdaemon returns lrecl = 0 for recfm U

copytape/tpcopy.c: 1.6 96/03/13 10:20:56 by baud 
allow to write several files per output tape in SPLIT mode

************************ VERSION 1.8.3.5 *****************************
common/ypgetacctent.c: 1.2 96/01/29 08:50:51 by baud 
correct line 67 to avoid warning messages at compilation time on AIX

rfio/Imakefile: 1.30 96/01/21 20:26:25 by baud 
add mstat.o to the list of dependencies

rfio/mstat.c: 1.6 96/02/07 13:56:09 by hemmer 
Corrected SCCS header

rfio/parse.c: 3.12 96/01/29 08:58:19 by baud 
strcmp value must be tested against zero and not NULL

rtcopy/dktotpU.c: 2.29 96/01/29 08:46:49 by baud 
add declaration of getconfent

rtcopy/rtcopy.awk: 2.4 96/02/25 17:07:17 by fabien 
Added a test to prevent awk from looping when the right part of a file seq number range is a non numeric value (ie corrected bug found by Rick Jones when specifying -q 1-e)

rtcopy/tpread.c: 2.60 96/01/25 18:32:55 by fabien 
Allows more than 64 filenames on the command line (two arrays are now malloc'ed)

scripts/sfetch: 1.7 96/02/12 18:09:53 by boissat 
Complete (re)organisation...

scripts/sfetch: 1.6 96/02/12 17:32:46 by boissat 
At the end, delete empty error temporary files

sysreq/netreq.c: 1.25 96/01/31 17:28:03 by hemmer 
Reset serrno if SENOCONFIG after getconfent failed.

tms/notms.c: 1.3 96/01/25 13:42:27 by baud 
TMS server is not running on VM anymore

tms/tms.h: 1.7 96/02/12 08:32:32 by baud 
SYSREQ/TMS are not running on VM anymore

tms/tmsdaemon.c: 1.25 96/02/09 16:48:20 by baud 
SYSREQ/TMS are not running on VM anymore

tms/tmsexit.c: 1.8 96/02/09 16:48:06 by baud 
SYSREQ/TMS are not running on VM anymore

tms/tmsreq.man: 1.2 96/02/09 14:16:53 by baud 
SYSREQ/TMS are not running on VM anymore

tms/tmstat.man: 1.2 96/02/09 14:20:02 by baud 
SYSREQ/TMS are not running on VM anymore

stage/Imakefile: 1.11 96/02/07 10:17:16 by baud 
add stage intro man page

stage/Imakefile: 1.10 96/02/07 10:10:29 by baud 
stagecat is an admin command (mode 750)

stage/poolmgr.c: 1.16 96/01/19 07:28:53 by baud 
avoid stgdaemon crash when updating free space for a file system not currently accessible

stage/procio.c: 1.15 96/02/15 14:39:01 by baud 
if stageput fails with STG22, entry in waitq must be removed

stage/procupd.c: 1.8 96/01/29 08:25:11 by baud 
if unable to delete file after stagewrt successful, mark the file as STAGED to avoid internal error

NEW file: stage/stage.man(1.1)
stage/stage.man: 1.1 96/02/07 10:12:55 by baud 
date and time created 96/02/07 10:12:55 by baud

stage/stgdaemon.c: 2.12 96/02/09 16:55:14 by baud 
 correct stageacct parameter list when starting a stager child to avoid stgdaemon crash

copytape/ctpdaemon.c: 1.7 96/01/29 15:38:21 by baud 
correctly detect conflict between -f and -k options

************************ VERSION 1.8.3.4 *****************************
msg/msgdaemon.c: 1.15 95/12/18 07:27:16 by baud 
#include <time.h> because of ctime (to avoid warning on AIX4)

tape/mounttape.c: 1.65 95/12/15 07:52:40 by baud 
ufreq.ux must also be updated after a reselect

tape/tpdaemon.c: 1.64 95/12/19 11:34:48 by baud 
check for drive busy (or assigned elsewhere) when configuring a device up

tape/tperror.c: 1.11 95/12/20 09:32:14 by baud 
ERA code 0x27 is also possible with ADSTAR driver

rtcopy/rtcopyd.c: 2.61 95/12/20 14:41:41 by acher 
Message in rtcopy.err if fork() fails.

dpm/util/strutil.c: 3.4 95/12/18 07:31:46 by baud 
#include <time.h> because of ctime (to avoid warning on AIX4)

stage/stageput.c: 1.9 95/12/14 15:41:18 by baud 
correct processing of -V option

************************ VERSION 1.8.3.3 *****************************
./README: 1.4 95/12/12 07:03:15 by baud 
add comments for version 1.8.3.3

msg/oper.c: 1.15 95/12/08 16:36:46 by boissat 
Fix warning under HPUX10.

tape/Imakefile: 1.23 95/12/07 08:21:37 by baud 
add rule to create tpinfo man page

tape/buildhdrlbl.c: 1.8 95/12/08 08:17:42 by baud 
correct processing of recfm (broken by mod 1.7)

tape/mounttape.c: 1.64 95/12/11 15:10:42 by baud 
add explicit cast to avoid warning at compilation time on Solaris 2.4

tape/mounttape.c: 1.63 95/12/08 07:25:42 by baud 
set default fid (feature broken by mod 1.59)

rtcopy/dktotpF.c: 2.31 95/12/11 10:41:47 by baud 
add processing of option -C block

rtcopy/rtcopyerr.h: 1.7 95/12/08 07:48:16 by baud 
add message RT222 for records truncated while converting from variable format to fixed format

rtcopy/tpio.c: 1.32 95/12/12 07:01:28 by baud 
allow to skip long tape blocks with -E skip

rtcopy/tpread.man: 1.14 95/12/11 14:45:10 by baud 
document option -C block

rtcopy/tptodkF.c: 2.36 95/12/08 08:00:40 by baud 
for SONY devices in raw mode, readlen must not be rounded

stage/stagecat.man: 1.3 95/12/11 13:55:21 by baud 
document option -C block

stage/stagein.man: 1.21 95/12/11 13:52:54 by baud 
document option -C block

stage/stageout.man: 1.3 95/12/11 14:09:54 by baud 
document option -C block

stage/stagewrt.man: 1.3 95/12/11 14:13:32 by baud 
document option -C block

copytape/copytape.h: 1.8 95/12/11 15:25:47 by baud 
define constant REQKILD

copytape/ctpdaemon.c: 1.6 95/12/11 16:17:25 by baud 
correct processing of request killed

copytape/tpcopy.c: 1.5 95/12/11 16:08:51 by baud 
exit with REQKILD instead of USERR if request killed

************************ VERSION 1.8.3.2 *****************************
h/net.h: 1.5 95/12/05 05:03:53 by hemmer 
Removed /* inside a comment, causing AIX 4 cc to complain

fhs/fhsdaemon.c: 1.14 95/11/24 15:56:55 by baud 
initialize fromlen

tape/cvtden.c: 1.8 95/11/28 13:28:40 by baud 
add density 8500C for Exabytes in mode 8500 with compression

tape/mounttape.c: 1.62 95/12/04 11:29:25 by baud 
add processing of "reselect server"

tape/mounttape.c: 1.61 95/12/04 07:21:07 by baud 
add processing of option -N of tpmnt (no tape repositionning when accessing 2 consecutive files on nl tapes)

tape/posittape.c: 1.25 95/12/04 07:23:15 by baud 
add processing of option -N of tpmnt (no tape repositionning when accessing 2 consecutive files on nl tapes)

tape/tape.h: 1.47 95/12/04 11:27:29 by baud 
add message "TP047 - reselect server requested by operator"

tape/tape.h: 1.46 95/12/04 07:27:16 by baud 
add message and variables for option -N of tpmnt; define constant ETRSLT to indicate "reselect server needed"

tape/tpdaemon.c: 1.63 95/12/04 07:16:57 by baud 
add processing of option -N of tpmnt (no tape repositionning when accessing 2 consecutive files on nl tapes)

tape/tpdaemon.c: 1.62 95/11/24 15:50:31 by baud 
initialize fromlen to avoid daemon crash on solaris 2.4

tape/tpmnt.c: 1.25 95/12/04 07:29:18 by baud 
add processing of option -N of tpmnt (no tape repositionning when accessing 2 consecutive files on nl tapes)

tape/tpmnt.man: 1.18 95/12/04 14:38:10 by baud 
document exit code 222 (Reselect server requested by operator)

tape/tpmnt.man: 1.17 95/12/04 10:51:05 by baud 
document option -N (no tape repositionning)

tape/usrlbl.c: 1.14 95/12/04 07:18:55 by baud 
after checkeofeov on nl tapes, leave the tape positionned between th 2 tapemarks

rfio/feof.c: 3.3 95/11/27 09:40:43 by acher 
 Local case changed as in fread.c

rtcopy/dktotpF.c: 2.30 95/12/06 15:57:15 by baud 
change variable name from ebc2a to a2ebc to reflect reality

rtcopy/dktotpU.c: 2.28 95/12/06 15:41:42 by baud 
change variable name from ebc2a to a2ebc to reflect reality

rtcopy/rtcopy.shift: 2.80 95/12/05 07:55:08 by baud 
accept new values "block" and "ebcdic,block" for option -C

rtcopy/rtcopy.shift: 2.79 95/12/04 09:13:03 by baud 
use -N option of tpmnt to make no repositionning of unlabelled tapes work

rtcopy/rtcopy.shift: 2.78 95/11/27 10:35:26 by acher 
if we skip tpmnt , them ipath should not be changed.

rtcopy/rtcopy.shift: 2.77 95/11/24 06:33:47 by baud 
add missing space in message TAPE MOUNTED ON UNIT

rtcopy/tpread.c: 2.59 95/12/05 07:52:20 by baud 
move check on -C option value from tpread.c to rtcopy.shift

rtcopy/tpread.c: 2.58 95/12/04 13:15:17 by baud 
add processing of RSLCT

rtcopy/tptodkF.c: 2.35 95/12/06 15:37:00 by baud 
change variable name from a2ebc tp ebc2a to reflect reality

rtcopy/tptodkF.c: 2.34 95/12/05 10:43:50 by baud 
add processing of option -C block

rtcopy/tptodkF.c: 2.33 95/11/23 14:28:58 by acher 
If not under N or s ctl, write to disk also !

rtcopy/tptodkF.c: 2.32 95/11/22 10:11:06 by acher 
For Sony devices in RAW mode, End of transfer is always due to -N , -s. Return trhen 0 ( not 197 or other ).

rtcopy/tptodkU.c: 2.29 95/12/06 15:39:15 by baud 
change variable name from a2ebc to ebc2a to reflect reality

rtcopy/tptodkU.c: 2.28 95/11/22 10:12:24 by acher 
if SONYRAW , return 0 not 197.

sysreq/sysreq.c: 1.14 95/12/05 06:12:49 by hemmer 
added n,c,u,a,? flags

sysreq/sysreq.man: 1.3 95/12/05 06:25:37 by hemmer 
added -c,-n,-a,-u options doc.

tms/tmsdaemon.c: 1.24 95/11/24 15:51:41 by baud 
initialize fromlen to avoid daemon crash on solaris 2.4

tms/tmsdaemon.c: 1.23 95/11/22 09:40:27 by baud 
avoid looping on MOUNT when rc = 192

config/site.def: 1.22 95/12/06 15:05:19 by baud 
add 3590 in comment for ADSTAR flag

stage/procio.c: 1.14 95/12/05 13:21:51 by baud 
add processing of -C block and -C block,ebcdic

stage/stage.h: 1.20 95/12/05 10:51:11 by baud 
define new constants for -C option; they are used in the conversion fixed record --> variable record

stage/stager.c: 1.20 95/12/05 10:55:15 by baud 
add processing of -C block and -C block,ebcdic

copytape/ctpdaemon.c: 1.5 95/11/28 09:52:16 by baud 
put an entry in the log giving the origin of the request

copytape/sendrep.c: 1.3 95/11/28 09:27:31 by baud 
does not log exit code of copytape -Q

************************ VERSION 1.8.3.1 *****************************
./README: 1.3 95/11/20 15:29:34 by hemmer 
1.8.3.1 introduction

tape/tpdaemon.c: 1.61 95/11/21 09:42:27 by baud 
correct tpinfo processing

************************ VERSION 1.8.3.0 *****************************
./Imakefile: 1.9 95/10/11 08:22:50 by hemmer 
Ultrix 4.3 did not appreciate blanks instead of tabs

common/log.c: 1.23 95/10/24 09:53:55 by baud 
suppress definition of syslog for HPUX10

fhs/checkjobdied.c: 1.4 95/10/24 10:51:34 by baud 
in HPUX10, kernel file is /stand/vmunix

fhs/findpgrp.c: 1.4 95/10/24 10:53:18 by baud 
in HPUX10, kernel file is /stand/vmunix

tape/Imakefile: 1.22 95/10/27 15:39:17 by baud 
add command tpinfo; add routines to access SONY drive in raw mode

tape/buildhdrlbl.c: 1.7 95/10/27 15:51:41 by baud 
do not set defaults; store 0 in header if blksize or lrecl > 99999

tape/checkjobdied.c: 1.9 95/10/24 10:40:13 by baud 
in HPUX10, kernel file is /stand/vmunix

tape/cvtden.c: 1.7 95/11/15 15:44:13 by baud 
add densities DDS and DDSC for DAT devices

tape/cvtden.c: 1.6 95/10/27 13:19:39 by baud 
accept density RAW for SONY drives

tape/findpgrp.c: 1.11 95/10/24 10:38:57 by baud 
in HPUX10, kernel file is /stand/vmunix

tape/mounttape.c: 1.60 95/11/17 14:23:57 by baud 
include <string.h> because of strrchr

tape/mounttape.c: 1.59 95/10/30 16:48:23 by baud 
set defaults for recfm, blksize and lrecl; add support for blksize/lrecl > 99999; add support for SONY drives in RAW mode

tape/rbtsubr.c: 1.5 95/10/30 16:23:44 by baud 
qmid should return EIO and not 1 in case of failure

tape/rbtsubr.c: 1.4 95/10/27 13:43:32 by baud 
introduce support for SONY DMS-24; give a text instead of a number when qmid reports a mount failure

NEW file: tape/sonysubr.c(1.1)
tape/sonysubr.c: 1.1 95/10/27 14:11:49 by baud 
date and time created 95/10/27 14:11:49 by baud

tape/tape.h: 1.45 95/11/15 15:42:51 by baud 
add densities DDS and DDSC for DAT devices

tape/tape.h: 1.44 95/10/27 11:38:19 by baud 
add densities RAW and FMT for SONY drives; add new requests UPDFIL and TPINFO

tape/tpdaemon.c: 1.60 95/10/27 16:35:20 by baud 
add new requests UPDFIL and TPINFO; allow space for 6 characters for fseq (SONY locate), blksize and lrecl; pass density as argument to unloadtps to be able to call the scsi routines if the device is a SONY in raw mode

tape/tperror.c: 1.10 95/10/27 13:22:36 by baud 
modularize code by creating a routine get_sk_msg

NEW file: tape/tpinfo.c(1.1)
tape/tpinfo.c: 1.1 95/10/27 11:39:21 by baud 
date and time created 95/10/27 11:39:21 by baud

NEW file: tape/tpinfo.man(1.1)
tape/tpinfo.man: 1.1 95/10/27 11:52:02 by baud 
date and time created 95/10/27 11:52:02 by baud

tape/unloadtps.c: 1.19 95/10/30 16:18:14 by baud 
add support for SONY drives in RAW mode

tape/usrlbl.c: 1.13 95/11/16 08:20:05 by baud 
correct end of volume processing on alpha-osf

rfio/Imakefile: 1.29 95/11/07 15:33:34 by acher 
file for alarms changed ( any user should have write access ).

rfio/alrm.c: 1.3 95/11/07 15:30:34 by acher 
Default file for alarms changed ( any user should have write access ).

rfio/fclose.c: 3.3 95/10/31 16:36:04 by acher 
Only one method to know if stream is a FILE or an RFILE...

rfio/fclose.c: 3.2 95/10/30 10:46:31 by acher 
corrected many bugs .

rfio/feof.c: 3.2 95/10/30 10:52:22 by acher 
eof field of RFILE used rather than the FILE's _flag ( not portable , example on HPUX 9.x )

rfio/fopen.c: 3.4 95/10/31 16:31:19 by acher 
rfio_fopen() does rfio_open. now, even in local cases.

rfio/fopen.c: 3.3 95/10/27 18:47:35 by acher 
No Read links if doing fopen() : it is already done by open().

rfio/fread.c: 3.5 95/10/31 16:33:18 by acher 
The ONLY way of guessing reliably if stream is local or remote is to compare the pointers or re-design rfio. 1st solution choosed...

rfio/fread.c: 3.4 95/10/30 10:48:12 by acher 
_flag did not exist in the RFILE struct + feof applied to __flag in

rfio/fread.c: 3.3 95/10/27 18:49:02 by acher 
Test for case local was wrong.

rfio/fwrite.c: 3.3 95/10/31 16:35:10 by acher 
Only one method to know if stream is a FILE or an RFILE...

rfio/lun2fn.c: 3.3 95/10/20 14:17:26 by boissat 
Fix problem with Fortran units lower than 10 under HPUX

rfio/open.c: 3.15 95/10/30 10:49:31 by acher 
 eof flag will be used, should be initialized.

rfio/rfio_calls.c: 3.37 95/11/03 09:43:35 by boissat 
Wrong buffer size in chuser().

rtcopy/Imakefile: 1.24 95/11/02 16:04:11 by baud 
add flag SONYRAW

rtcopy/Imakefile: 1.23 95/10/31 15:45:06 by baud 
correct check on Accounting

rtcopy/dktotpF.c: 2.29 95/11/03 19:18:17 by acher 
underNctl should be switched up with care...

rtcopy/dktotpF.c: 2.28 95/11/03 17:32:39 by acher 
Mods for SONY robot DMS introduced, bugs corrected with high block sizes

rtcopy/dktotpU.c: 2.27 95/11/03 19:19:20 by acher 
underNctl should be modified with care.

rtcopy/dktotpU.c: 2.26 95/11/03 17:38:08 by acher 
bandwidth displayed | mods for SONY robot

rtcopy/rtcopy.shift: 2.76 95/11/16 13:03:05 by acher 
Tape label info messages not sent any more tp rtcopyd.log

rtcopy/rtcopy.shift: 2.75 95/11/16 13:01:58 by acher 
cmd converted in initials .

rtcopy/rtcopy.shift: 2.74 95/11/07 15:29:19 by acher 
 Skipping tpmnt for unlabelled tapes in certain cases + stageupdc info completed

rtcopy/rtcopy.shift: 2.73 95/11/06 18:31:39 by acher 
Message for UNIT arranged...

rtcopy/rtcopy.shift: 2.72 95/11/06 15:20:32 by acher 
if no label and tptodk ok, skip tpmnt + tpinfo in all cases.

rtcopy/rtcopyerr.h: 1.6 95/11/03 17:27:44 by acher 
Added messages for bandwidth

rtcopy/tpio.c: 1.31 95/11/02 16:09:23 by baud 
add support for SONY drives in RAW mode

rtcopy/tpio.c: 1.30 95/11/02 13:30:34 by baud 
return ENOSPC instead of UNERR if volume overflow encountered while writing the trailer label

rtcopy/tptodkF.c: 2.31 95/11/03 19:14:38 by acher 
One more bug solved. Debug messages added. can be switched with -x option at tpread.

rtcopy/tptodkF.c: 2.30 95/11/03 17:29:34 by acher 
bugs solved for # of bytes sent, of blocage if -s set or -N is set.

rtcopy/tptodkU.c: 2.27 95/11/03 19:16:03 by acher 
underNctl should be switched after some checking ! 

rtcopy/tptodkU.c: 2.26 95/11/03 17:34:25 by acher 
bandwidth displayed | mods for SONY robot | bug corrected.

scripts/sfetch: 1.5 95/10/26 10:06:34 by boissat 
Problem fixed with 'tr -s' under OSF1

tms/checkjobdied.c: 1.8 95/10/24 10:44:09 by baud 
in HPUX10, kernel file is /stand/vmunix

tms/findpgrp.c: 1.4 95/10/24 10:48:25 by baud 
in HPUX10, kernel file is /stand/vmunix

imake/imakemdep.h: 1.3 95/10/24 10:04:38 by baud 
add support for HPUX10

config/hp.cf: 1.3 95/10/24 10:12:36 by baud 
add support for HPUX10

config/site.def: 1.21 95/11/07 15:32:17 by acher 
Default for DPM build flag changed

stage/buildupath.c: 1.8 95/10/20 14:19:00 by boissat 
Fix problem with Fortran units lower than 10 under HPUX

stage/procqry.c: 1.7 95/10/16 15:27:46 by baud 
allow for 6 digits in lrecl and blksize fields

stage/procupd.c: 1.7 95/10/27 07:21:30 by baud 
avoid messages "Bad file number" when ENOSPC

stage/stager.c: 1.19 95/10/16 15:12:44 by baud 
increase size of lrecl and blksize to hold 6 digits

stage/stageupdc.c: 1.7 95/10/27 07:24:30 by baud 
do not retry if ENOSPC, otherwise the allocated space is released MAXRETRY + 3 times

stage/stgdaemon.c: 2.11 95/11/08 08:43:42 by baud 
do not fork/exec a stager if space could not be allocated for some files of a multifile request to avoid concatenation in the last allocated file

stage/stgdaemon.c: 2.10 95/11/03 08:08:23 by baud 
send an error message and close the socket when receiving an unimplemented request type

copytape/Imakefile: 1.9 95/11/06 07:25:47 by baud 
add missing targets in clobber rule

copytape/Imakefile: 1.8 95/11/03 09:28:26 by baud 
add flag NOMORECPTP

copytape/copytape.c: 1.13 95/11/03 16:19:55 by baud 
add option -Q for copytape query

copytape/copytape.h: 1.7 95/11/03 16:27:20 by baud 
add definitions for copytape -Q; add message CTP27 for request put in the queue

copytape/copytape.man: 1.9 95/11/03 16:50:28 by baud 
add copytape -Q and document the file nomorecptp

copytape/ctpdaemon.c: 1.4 95/11/03 16:25:09 by baud 
add message when request goes to the queue; add processing of copytape -Q

copytape/send2ctpd.c: 1.3 95/11/03 16:22:32 by baud 
add processing of MSG_OUT

copytape/sendrep.c: 1.2 95/11/03 16:28:39 by baud 
add processing of MSG_OUT

copytape/tpcopy.c: 1.4 95/10/16 15:16:04 by baud 
increase size of lrecl and blksize to hold 6 digits

************************ VERSION 1.8.2.11 *****************************
./Imakefile: 1.8 95/10/10 17:56:06 by hemmer 
export rules splitted, include files now also exported

./README: 1.2 95/10/10 17:27:30 by hemmer 
1.8.2.11 release notes

h/Imakefile: 1.3 95/10/10 18:07:25 by hemmer 
include files now exported

lib/Imakefile: 1.4 95/10/10 18:08:30 by hemmer 
export rules splitted

rfio/Imakefile: 1.28 95/10/10 18:10:13 by hemmer 
export rules splitted

rtcopy/Imakefile: 1.22 95/10/10 18:09:26 by hemmer 
export rules splitted

sysreq/Imakefile: 1.8 95/10/10 18:11:50 by hemmer 
export rules splitted

dpm/Imakefile: 1.3 95/10/10 17:58:28 by hemmer 
export rules splitted

dpm/h/Imakefile: 1.3 95/10/10 18:01:25 by hemmer 
export rules splitted

dpm/util/Imakefile: 1.5 95/10/10 18:05:12 by hemmer 
export rules splitted

dpm/parser/Imakefile: 1.7 95/10/10 18:04:15 by hemmer 
export rules splitted

dpm/dpm/Imakefile: 1.11 95/10/10 18:00:28 by hemmer 
export rules splitted

commands/Imakefile: 1.3 95/10/10 17:47:55 by hemmer 
export rules splitted 

config/Imake.rules: 1.3 95/10/10 17:50:11 by hemmer 
man pages now exported in source format, as they 
display badly on some systems

stage/Imakefile: 1.9 95/10/10 18:10:57 by hemmer 
export rules splitted

stage/stager.c: 1.18 95/10/10 13:19:57 by baud 
correct processing of multivolume when there are MAXVSN tapes in the set

copytape/Imakefile: 1.7 95/10/10 17:53:40 by hemmer 
export rules splitted 

************************ VERSION 1.8.2.10 *****************************
tape/tpdaemon.man: 1.5 95/10/06 11:50:18 by baud 
document IBM3590 and fast positionning

rfio/pclose.c: 1.2 95/10/09 15:19:47 by acher 
pclose.c

rtcopy/rtcopy.shift: 2.71 95/10/09 14:41:04 by acher 
rls -a added.

sysreq/netreq.c: 1.24 95/10/04 10:55:21 by hemmer 
Also writes could fail on serrno's (e.g. connection dropped).

stage/buildupath.c: 1.7 95/10/06 08:09:19 by baud 
add req_type to list of arguments for build_linkname and build_Upath to solve problem of stagewrt of afs files

stage/stagealloc.c: 1.4 95/10/06 08:10:32 by baud 
add req_type to list of arguments for build_linkname and build_Upath to solve problem of stagewrt of afs files

stage/stagein.c: 1.22 95/10/06 08:11:34 by baud 
add req_type to list of arguments for build_linkname and build_Upath to solve problem of stagewrt of afs files

stage/stageput.c: 1.8 95/10/06 08:12:29 by baud 
add req_type to list of arguments for build_linkname and build_Upath to solve problem of stagewrt of afs files

stage/stageupdc.c: 1.6 95/10/06 08:13:29 by baud 
add req_type to list of arguments for build_linkname and build_Upath to solve problem of stagewrt of afs files

************************ VERSION 1.8.2.9 *****************************
tape/dmpfil.c: 1.23 95/10/03 14:57:02 by baud 
remove MTIOCGET when reading tape mark (was for sun only and info is difficult to interpret by end user); add support for IBM3590

tape/mounttape.c: 1.58 95/10/03 09:12:37 by baud 
load display also for IBM3590

tape/posittape.c: 1.24 95/10/03 09:14:23 by baud 
use fast skip also for IBM3590

tape/unloadtps.c: 1.18 95/10/03 09:08:06 by baud 
load display also for IBM3590

config/Library.tmpl: 1.6 95/10/03 11:55:22 by baud 
Split copytape installation in client and server

config/Project.tmpl: 1.7 95/10/03 11:55:40 by baud 
Split copytape installation in client and server

config/site.def: 1.20 95/10/03 11:56:01 by baud 
Split copytape installation in client and server

copytape/Imakefile: 1.6 95/10/03 12:02:35 by baud 
Split copytape installation in client and server

************************ VERSION 1.8.2.8 *****************************
./CONTRIBUTORS: 1.2 95/09/28 11:38:17 by hemmer 
added a few names

./Imakefile: 1.7 95/09/28 11:32:02 by hemmer 
added cernlib target

NEW file: ./PORTING(1.7)
./PORTING: 1.7 95/09/28 11:37:26 by hemmer 
README now called PORTING enven if out of date

./README: 1.1 95/10/02 09:51:55 by hemmer 
date and time created 95/10/02 09:51:55 by hemmer

h/sacct.h: 1.6 95/09/22 13:42:31 by baud 
fseq field in accttape structure is file seq if TPPOSIT or queue size if TPDGQ

rtcopy/tpio.c: 1.29 95/09/27 07:29:33 by baud 
return ENOSPC instead of USERR if tape volume overflow while writing the header label

stage/procio.c: 1.13 95/09/28 15:29:00 by baud 
increment nb_clnreq only once even if several subrequests of the same request are waiting for space

stage/procio.c: 1.12 95/09/22 11:54:47 by baud 
protect stgdaemon against requests specifying -p NOPOOL without giving any linkname

stage/stagein.man: 1.20 95/09/25 08:19:18 by baud 
document option -z

copytape/copytape.c: 1.12 95/09/25 15:00:34 by baud 
returns USERR even if there are several parameter errors

copytape/copytape.c: 1.11 95/09/25 07:31:19 by baud 
if interactive request and no vid specified, give the message "Please enter the directives"

copytape/copytape.c: 1.10 95/09/25 06:57:05 by baud 
avoid reject of a straight copy of one volume to another

copytape/copytape.h: 1.6 95/09/25 15:04:52 by baud 
replace unused msg CTP07 by "CTP07 - number of tape directives does not match the value given on the mode line"

copytape/ctpdaemon.c: 1.3 95/09/28 16:03:31 by baud 
some global variables must be reset to zero when processing a new request

copytape/ctpdaemon.c: 1.2 95/09/25 15:02:28 by baud 
check that the number of tape directives matches the value given on the mode line

copytape/send2ctpd.c: 1.2 95/09/22 10:44:51 by baud 
include <sys/types.h> to avoid compilation errors on IRIX

copytape/tpcopy.c: 1.3 95/09/27 14:41:17 by baud 
accept recfm FBS when decoding STG47 messages

copytape/tpcopy.c: 1.2 95/09/25 09:29:55 by baud 
avoid losing last output lines of stage requests

************************ VERSION 1.8.2.7 *****************************
sysreq/Imakefile: 1.7 95/09/21 13:29:44 by baud 
sysreq.h now in sysreq subdirectory

************************ VERSION 1.8.2.6 *****************************
rtcopy/rtcopy.shift: 2.70 95/09/20 06:49:21 by baud 
add a missing test on recfm FBS

copytape/Imakefile: 1.5 95/09/21 09:19:49 by baud 
export copytape client/servers and man page

copytape/Imakefile: 1.4 95/09/20 15:48:29 by baud 
split copytape into client and server

copytape/copytape.c: 1.9 95/09/20 16:44:32 by baud 
split copytape into client and server; do not use nqs

copytape/copytape.h: 1.5 95/09/20 15:52:13 by baud 
define new symbols and structures needed after the split of copytape into client and server

copytape/copytape.man: 1.8 95/09/21 09:23:18 by baud 
now copytape runs in client/server model; document ENOSPC

NEW file: copytape/ctpdaemon.c(1.1)
copytape/ctpdaemon.c: 1.1 95/09/20 16:08:42 by baud 
date and time created 95/09/20 16:08:42 by baud

NEW file: copytape/ctplogit.c(1.1)
copytape/ctplogit.c: 1.1 95/09/20 16:05:03 by baud 
date and time created 95/09/20 16:05:03 by baud

NEW file: copytape/send2ctpd.c(1.1)
copytape/send2ctpd.c: 1.1 95/09/20 16:06:27 by baud 
date and time created 95/09/20 16:06:27 by baud

NEW file: copytape/sendrep.c(1.1)
copytape/sendrep.c: 1.1 95/09/20 16:07:19 by baud 
date and time created 95/09/20 16:07:19 by baud

NEW file: copytape/tpcopy.c(1.1)
copytape/tpcopy.c: 1.1 95/09/20 16:09:33 by baud 
date and time created 95/09/20 16:09:33 by baud

************************ VERSION 1.8.2.5 *****************************
h/Imakefile: 1.2 95/09/15 15:56:55 by hemmer 
sysreq.h now in sysreq subdirectory

h/shift.h: 1.2 95/09/15 15:56:54 by hemmer 
sysreq.h now in sysreq subdirectory

tape/mounttape.c: 1.57 95/09/17 08:08:42 by baud 
qmid should also be called for ADSTAR

sysreq/netreq.c: 1.23 95/09/15 15:57:21 by hemmer 
sysreq.h now in sysreq subdirectory

sysreq/sysreq.c: 1.13 95/09/15 15:57:23 by hemmer 
sysreq.h now in sysreq subdirectory

NEW file: sysreq/sysreq.h(1.6)
sysreq/sysreq.h: 1.6 95/03/28 12:03:59 by hemmer 
malloc() now defined in stdlib

sysreq/sysreqc.c: 1.10 95/09/15 15:57:23 by hemmer 
sysreq.h now in sysreq subdirectory

sysreq/sysreqf.c: 1.22 95/09/15 15:57:24 by hemmer 
sysreq.h now in sysreq subdirectory

sysreq/xdr.c: 1.17 95/09/15 15:57:26 by hemmer 
sysreq.h now in sysreq subdirectory

copytape/copytape.man: 1.7 95/09/15 10:36:55 by baud 
option -G is only valid on the command line

DELETED file : h/sysreq.h (1.6)
************************ VERSION 1.8.2.4 *****************************
common/getifnam.c: 1.13 95/09/01 14:40:51 by acher 
on some AIX systems, ifreq struct may have variable length.

h/rfio.h: 3.28 95/09/01 16:23:12 by acher 
setopt() flags to force local I/O.

tape/dmpfil.c: 1.22 95/09/04 08:13:45 by baud 
add exit (0) when successful

tape/dumptape.man: 1.4 95/09/12 17:09:39 by baud 
add a note saying that remote dumptape output goes to stderr

tape/dumptape.sh: 1.13 95/09/04 07:56:01 by baud 
accept -S option

tape/dumptape.sh: 1.12 95/09/04 07:48:24 by baud 
create unique tape path and label information file path

rfio/parse.c: 3.11 95/09/01 16:31:26 by acher 
RFIO_FORCELOCAL triggers local I/O.

rfio/setopt.c: 1.3 95/09/01 16:25:32 by acher 
RFIO_CONNECTOPT added to force local I/O.

rfio/statfs.c: 1.3 95/09/11 17:14:37 by acher 
Local statfs should be given local path ( filename ).

rtcopy/dktotpF.c: 2.27 95/09/04 17:01:58 by acher 
Buffer resizable for higher block size selection.

rtcopy/rtcopy.shift: 2.69 95/09/14 13:56:28 by acher 
No retries if tape is full and beeing written.

rtcopy/rtcopy.shift: 2.68 95/09/11 17:00:33 by acher 
oldrecfm should be restored: problem if multiple files && FB or FBS mount requested.

rtcopy/rtcopy.shift: 2.67 95/09/01 09:35:06 by acher 
When FBS specified, use tptodkF or dktotpF.

rtcopy/rtcopyd.c: 2.60 95/09/13 12:20:18 by acher 
count limit 

rtcopy/rtcopyd.c: 2.59 95/09/12 13:01:53 by acher 
If argument is greater than the 128 bytes allocated, then truncate the display in its middle.

rtcopy/rtcopyd.c: 2.58 95/09/08 16:33:09 by acher 
 rcode sent to rtcopy account routine.

rtcopy/rtcopyerr.h: 1.5 95/09/04 17:03:35 by acher 
Message to hold buffer problems cases.

rtcopy/tptodkF.c: 2.29 95/09/04 17:05:00 by acher 
Buffer resizable for higher block size selection.

stage/Imakefile: 1.8 95/09/12 13:24:13 by baud 
add stageupdc man page

stage/poolmgr.c: 1.15 95/09/12 07:10:40 by baud 
correct getpoolconf when pool element names are not in SHIFT notation; put an entry in the log every time the free space is updated

stage/procio.c: 1.11 95/09/13 15:00:27 by baud 
split very long option values before sending them to the log

stage/procupd.c: 1.6 95/09/14 14:19:38 by baud 
display the actual fseq in message STG41

stage/procupd.c: 1.5 95/09/12 11:07:17 by baud 
accept -U option

stage/stagealloc.man: 1.5 95/09/13 07:26:36 by baud 
add reference to stageupdc and an example

stage/stagecat.man: 1.2 95/09/08 09:27:10 by baud 
each command has now its own man page

stage/stagein.c: 1.21 95/09/14 07:36:35 by baud 
does not retry at client level if ENOSPC

stage/stagein.man: 1.19 95/09/08 09:14:28 by baud 
split the man page in 4 man pages (one per command)

stage/stageout.man: 1.2 95/09/08 09:16:14 by baud 
each command has now its own man page

stage/stageput.c: 1.7 95/09/14 07:37:18 by baud 
does not retry at client level if ENOSPC

stage/stageput.man: 1.6 95/09/14 08:08:21 by baud 
more precise description of option -U

stage/stageput.man: 1.5 95/09/14 07:38:23 by baud 
document ENOSPC: tape volume overflow

NEW file: stage/stageupdc.man(1.1)
stage/stageupdc.man: 1.1 95/09/13 07:02:06 by baud 
date and time created 95/09/13 07:02:06 by baud

stage/stagewrt.man: 1.2 95/09/08 09:25:58 by baud 
each command has now its own man page

copytape/Imakefile: 1.3 95/09/13 07:55:22 by baud 
suppress definition of copytape input directive file used by the panel interface

copytape/Imakefile: 1.2 95/09/05 16:17:10 by baud 
correct misprint (chown replaced by chmod)

copytape/copytape.c: 1.8 95/09/14 11:01:08 by baud 
suppress call to panel interface; add option -P; split long commands before putting them in the user log; accept * in any column for comment lines

copytape/copytape.c: 1.7 95/09/06 14:29:29 by baud 
add option -E halt (default)

copytape/copytape.c: 1.6 95/09/05 15:56:54 by baud 
add prefix BIN/ to copytape, stagein, stagewrt commands

copytape/copytape.c: 1.5 95/09/05 15:27:07 by baud 
add option -C for ebcdic character conversion

copytape/copytape.h: 1.4 95/09/12 16:35:43 by baud 
add definition of PRTBUFSZ

copytape/copytape.h: 1.3 95/09/05 15:25:01 by baud 
add charconv field

copytape/copytape.man: 1.6 95/09/13 06:58:57 by baud 
if copytape mode is not specified, copy of a single volume to another is assumed

copytape/copytape.man: 1.5 95/09/12 17:14:04 by baud 
suppress automatic call of panel interface; document the different modes; more precise description of -q option for output tapes

copytape/copytape.man: 1.4 95/09/06 14:25:50 by baud 
add option -E halt (default)

copytape/copytape.man: 1.3 95/09/06 13:36:50 by baud 
add example with input redirection

copytape/copytape.man: 1.2 95/09/05 15:42:35 by baud 
add option -C for ebcdic character conversion

************************ VERSION 1.8.2.3 *****************************
tape/dmpfil.c: 1.21 95/08/29 16:44:42 by baud 
make exit codes compatible with man page

tape/dumptape.sh: 1.11 95/08/31 07:49:44 by baud 
set exit code if dmpfil fails

tape/tpmnt.c: 1.24 95/08/29 13:26:43 by baud 
accept record format FBS

rfio/mstat.c: 1.5 95/08/30 12:06:18 by acher 
rfindex should be reset 

rfio/rfio_serv.c: 3.35 95/08/29 12:52:26 by hemmer 
fd 0,1,2 Back for osf/1, AIX, SGI, as it causes problems to 
popen. really should go in popen's code.

rtcopy/rtcopy.shift: 2.66 95/08/30 12:17:15 by acher 
nread used both for -N opt and for stats, label info sent to stager, FBS type added.

rtcopy/tpio.c: 1.28 95/08/30 11:57:31 by baud 
exit (ENOSPC) instead of exit (USERR) in case of tape volume overflow

stage/procclr.c: 1.5 95/08/28 15:26:40 by baud 
use MAXGRPNAMELEN to define array "group"

stage/procio.c: 1.10 95/08/29 13:33:19 by baud 
accept record format FBS

stage/procqry.c: 1.6 95/08/25 15:34:07 by baud 
use MAXGRPNAMELEN to define array "group"

stage/procupd.c: 1.4 95/08/30 14:10:34 by baud 
do not update recfm, blksize, lrecl, fid and fseq with server provided values until the request is complete, otherwise the retries don't work; return ENOSPC for tape volume overflow

stage/send2stgd.c: 1.16 95/08/30 16:18:39 by baud 
suppress unnecessary include <sys/un.h>

stage/stage.h: 1.19 95/08/25 15:32:45 by baud 
define MAXGRPNAMELEN and use it for array "group"

stage/stagein.man: 1.18 95/08/30 13:20:53 by baud 
ENOSPC is returned also in case of tape volume overflow

stage/stageinit.c: 1.3 95/08/31 07:13:13 by baud 
add option -F

stage/stageinit.man: 1.3 95/08/31 07:18:02 by baud 
add option -F

stage/stgdaemon.c: 2.9 95/08/31 07:12:12 by baud 
add option -F to stageinit

copytape/copytape.c: 1.4 95/08/30 07:57:49 by baud 
correct processing of output fseq parameter; change log permissions; correct processing if no BLIND, MERGE, SPLIT in directives; accept format FBS

************************ VERSION 1.8.2.2 *****************************
tape/Imakefile: 1.21 95/08/23 10:31:07 by baud 
add RS6000PCTA and ADSTAR flags when compiling usrreadlbl; otherwise blank tape is not recognized

rtcopy/rtcopyd.c: 2.57 95/08/23 16:16:45 by hemmer 
sys/wait.h was not included for sgi 

stage/procqry.c: 1.5 95/08/23 13:42:20 by baud 
use rfio_mstat for stageqry -S processing

stage/stager.c: 1.17 95/08/22 15:31:06 by baud 
if STAGEPUT request, put filenames in right order for rfcp

stage/stgdaemon.c: 2.8 95/08/22 15:36:10 by baud 
When stagealloc fails or is killed, the request should be removed

copytape/copytape.c: 1.3 95/08/23 10:33:58 by baud 
add \n to separate stage operations in the user log

copytape/copytape.c: 1.2 95/08/22 10:15:52 by baud 
force Bourne shell when submitting job; add vid to CTP11 message

copytape/copytape.h: 1.2 95/08/22 10:16:36 by baud 
add vid to CTP11 message

************************ VERSION 1.8.2.1 *****************************
tape/tperror.c: 1.9 95/08/19 07:27:38 by baud 
give message "Volume overflow" instead of "Device not operational" if errno == ENXIO for a tape write on an RS6000 platform

rtcopy/dumptape.c: 1.2 95/08/21 06:53:13 by baud 
add MESSAGE to sysreq call

rtcopy/tpio.c: 1.27 95/08/21 07:12:11 by baud 
exit (USERR) if volume overflow while writing header label

rtcopy/tpread.c: 2.57 95/08/21 06:53:30 by baud 
add MESSAGE to sysreq call

NEW file: copytape/Imakefile(1.1)
copytape/Imakefile: 1.1 95/08/17 13:43:12 by baud 
date and time created 95/08/17 13:43:12 by baud

NEW file: copytape/copytape.c(1.1)
copytape/copytape.c: 1.1 95/08/17 16:39:06 by baud 
date and time created 95/08/17 16:39:06 by baud

NEW file: copytape/copytape.h(1.1)
copytape/copytape.h: 1.1 95/08/16 09:09:30 by baud 
date and time created 95/08/16 09:09:30 by baud

NEW file: copytape/copytape.man(1.1)
copytape/copytape.man: 1.1 95/08/18 09:48:16 by baud 
date and time created 95/08/18 09:48:16 by baud

************************ VERSION 1.8.2.0 *****************************
./Imakefile: 1.6 95/08/16 10:29:55 by baud 
add copytape

tape/dumptape.sh: 1.10 95/08/15 10:09:54 by baud 
add full path for msgr because of remote dumptape

tape/dumptape.sh: 1.9 95/08/11 14:55:56 by baud 
add "( message" to tms request

tape/getlabelinfo.c: 1.4 95/08/16 19:59:49 by baud 
increase number of digits for fseq to 4

tape/mounttape.c: 1.56 95/08/16 20:01:23 by baud 
increase number of digits for fseq to 4

tape/tape.h: 1.43 95/08/16 19:57:43 by baud 
increase space in labelinfo to store 4 digits fseq

tape/tpdaemon.c: 1.59 95/08/16 20:03:27 by baud 
increase number of digits for fseq and fsec to 4

tape/tpmnt.man: 1.16 95/08/16 20:19:57 by baud 
increase number of digits for fseq to 4

rtcopy/tpread.c: 2.56 95/08/18 07:33:58 by baud 
suppress double free that gives a tpread Segmentation Fault on Solaris when the option -S is present

config/Library.tmpl: 1.5 95/08/16 10:23:36 by baud 
add copytape

config/Project.tmpl: 1.6 95/08/16 10:24:34 by baud 
add copytape

config/site.def: 1.19 95/08/17 10:40:16 by baud 
define CopytapeSpool

config/site.def: 1.18 95/08/16 10:26:07 by baud 
add copytape

stage/poolmgr.c: 1.14 95/08/18 07:59:09 by baud 
add routine checklastaccess

stage/poolmgr.c: 1.13 95/08/15 14:03:39 by baud 
protect stgdaemon against stageclr of catalog entries that refer to a pool that do not exist anymore

stage/procclr.c: 1.4 95/08/18 08:03:47 by baud 
when stageclr is called by the garbage collector, do not remove the file if it has been accessed after the garbage collector startup

stage/stageclr.c: 1.9 95/08/18 08:08:32 by baud 
check for EBUSY, which is returned by stgdaemon when the file has been accessed after garbage collector startup

************************ VERSION 1.8.1.10 *****************************
common/socket.c: 1.21 95/06/07 11:08:50 by hemmer 
receive should be read(0 for unix, not recv.

common/socket.c: 1.20 95/04/28 13:23:46 by hemmer 
Added non blocking read code.

common/socket.c: 1.19 94/07/29 07:18:48 by hemmer 
Allow TGV as an alias for MULTINET (CERNLIB requirement)

common/socket.c: 1.18 94/07/28 11:07:10 by hemmer 
s_ioctl for solaris already used by libsocket.a.

common/socket.c: 1.17 94/07/13 17:53:17 by hemmer 
change TGV to MULTINET

common/socket.c: 1.16 94/06/10 07:48:01 by hemmer 
Added VMS (MULTINET and UCX) support

common/socket.c: 1.15 94/04/14 10:53:13 by acher 
serrno raised if network problem occured.

common/socket.c: 1.14 93/11/02 11:05:24 by acher 
 SunOs 5.2 sys V preprocessor prefers " defined (cray-xmp)" to "ifdef cray-xmp"

common/socket.c: 1.13 92/04/06 10:10:25 by hemmer 
REALLY disable read() timeout (READTIMEOUT was still #defined !)

common/socket.c: 1.12 92/03/05 17:22:48 by hemmer 
Disable READ time out code (2 extra syscall/read at least !)

common/socket.c: 1.11 91/10/15 11:17:40 by hemmer 
Add I/O statistics information

common/socket.c: 1.10 91/07/02 17:42:02 by hemmer 
make PATCHY happy (only 80 character long source lines)

common/socket.c: 1.9 91/05/17 18:19:38 by hemmer 
proper VMS support

common/socket.c: 1.8 91/05/16 12:14:18 by hemmer 
add TGV support for vms

common/socket.c: 1.7 91/04/30 10:22:57 by hemmer 


common/socket.c: 1.6 91/03/15 12:01:49 by hemmer 
auto segmentation switching

common/socket.c: 1.5 91/03/11 11:47:29 by hemmer 
remove DEBUG flag

common/socket.c: 1.4 91/03/11 11:23:10 by hemmer 
MINBLOCKSIZE for Ultranet RB bug

common/socket.c: 1.3 91/02/26 18:41:59 by hemmer 
Optimize : #ifdef's Dump, remove n=0 from for(;;) init (dorecv, dosend).

common/socket.c: 1.2 91/02/20 18:04:51 by hemmer 


common/socket.c: 1.1 91/02/08 18:57:36 by hemmer 
date and time created 91/02/08 18:57:36 by hemmer

tape/mounttape.c: 1.55 95/08/10 14:52:59 by baud 
add devtype to list of arguments for posittape

tape/posittape.c: 1.23 95/08/10 15:04:18 by baud 
add fast positionning for DLTs under alpha-osf; add devtype to list of arguments

rtcopy/rtcopy.shift: 2.65 95/08/09 11:47:25 by baud 
tplblinfo/stageupdc should always be called for a stager request even if recfm, blksize, lrecl have been specified. It is needed for fseq, fid

stage/buildupath.c: 1.6 95/08/08 11:12:34 by baud 
does not put a hostname if the path starts with /afs/

stage/procalloc.c: 1.4 95/08/08 09:43:15 by baud 
accept option -h

stage/procclr.c: 1.3 95/08/08 09:47:28 by baud 
accept option -h

stage/procio.c: 1.9 95/08/09 15:33:32 by baud 
accept option -h; do not set defaults for recfm, blksize; if trailing dash in -q option, check the catalog to see if a file is marked as LAST_TPFILE to avoid remounting tape

stage/procqry.c: 1.4 95/08/08 09:48:36 by baud 
accept option -h

stage/procupd.c: 1.3 95/08/09 15:36:53 by baud 
accept option -h; if trailing dash in -q option and tpread returns 211, flags the entry in the catalog as LAST_TPFILE

stage/stagealloc.c: 1.3 95/08/08 09:20:43 by baud 
add option -h

stage/stageclr.c: 1.8 95/08/08 09:22:11 by baud 
add option -h

stage/stagein.c: 1.20 95/08/08 09:23:38 by baud 
add option -h

stage/stagein.man: 1.17 95/08/10 07:42:31 by baud 
For stagein, if the tape is labelled, the default recfm and blksize are now taken from the header label

stage/stagein.man: 1.16 95/08/08 08:32:09 by baud 
add option -h; better explanation of the commands; give examples

stage/stageinit.c: 1.2 95/08/08 09:25:08 by baud 
add option -h

stage/stageput.c: 1.6 95/08/08 09:32:21 by baud 
add option -h

stage/stageqry.c: 1.6 95/08/08 09:33:19 by baud 
add option -h

stage/stageupdc.c: 1.5 95/08/08 09:34:32 by baud 
add option -h

************************ VERSION 1.8.1.9 *****************************
common/socket.c: 1.23 95/08/07 18:30:33 by acher 
DEBUG set to 0 for default + misplaced #ifdef DEBUG.

tape/rbtsubr.c: 1.3 95/08/04 13:12:25 by baud 
add support for ADSTAR

tape/tperror.c: 1.8 95/08/04 13:06:34 by baud 
add support for ADSTAR

rfio/alrm.c: 1.2 95/08/04 12:40:04 by acher 
<sys/stat.h> missing for some platforms.

rfio/lun2fn.c: 3.2 95/08/04 16:53:32 by acher 
for hpux fortran, default unit file is ftn<number>

rfio/mstat.c: 1.4 95/08/04 12:27:50 by acher 
 static integer "

config/site.def: 1.17 95/08/04 16:51:59 by acher 
on IRIX5 imake does not appreciate blanks before the vatiable

stage/cpdskdsk.sh: 1.4 95/08/04 14:59:56 by baud 
correct typo error: option is -X, not -x

stage/stagealloc.man: 1.4 95/08/07 16:06:40 by baud 
add option -h to specify the stgdaemon hostname

stage/stageclr.man: 1.4 95/08/07 16:13:30 by baud 
add option -h to specify the stgdaemon hostname

stage/stageinit.man: 1.2 95/08/07 16:18:07 by baud 
add option -h to specify the stgdaemon hostname

stage/stageput.man: 1.4 95/08/07 16:21:00 by baud 
add option -h to specify the stgdaemon hostname

stage/stageqry.man: 1.10 95/08/07 16:22:59 by baud 
add option -h to specify the stgdaemon hostname

************************ VERSION 1.8.1.8 *****************************
common/serror.c: 1.27 95/07/21 11:11:31 by hemmer 
Added SEOPNOSUP error string

common/socket.c: 1.22 95/08/04 07:23:50 by hemmer 
Fixed time'd out read

examples/Imakefile: 1.8 95/07/19 18:37:28 by acher 
mstatus inserted as example.

NEW file: examples/mstatus.c(1.3)
examples/mstatus.c: 1.3 95/07/20 11:29:53 by acher 
Commented.

h/rfio.h: 3.27 95/07/19 12:59:24 by acher 
added the constant MAXMCON for "multipled" requests.

h/sacct.h: 1.5 95/08/03 10:01:29 by acher 
Added keyword for Decrypted command line

h/serrno.h: 1.17 95/07/21 16:30:17 by hemmer 
added SEOPNOTSUP

tape/skiptape.c: 1.8 95/08/01 13:27:27 by baud 
add routine skiptpfff for fast positionning (only for alpha-osf and Adstar)

tape/tpdaemon.c: 1.58 95/08/01 13:24:00 by baud 
add support for Adstar assign/unassign

rfio/Imakefile: 1.27 95/07/21 16:45:50 by acher 
Added alarms.

rfio/Imakefile: 1.26 95/07/19 12:56:56 by acher 
Added mstat.c

NEW file: rfio/alrm.c(1.1)
rfio/alrm.c: 1.1 95/07/21 16:41:23 by acher 
date and time created 95/07/21 16:41:23 by acher

rfio/error.c: 3.13 95/07/20 12:56:57 by hemmer 
serrno is now taken first when encountered

NEW file: rfio/mstat.c(1.3)
rfio/mstat.c: 1.3 95/07/25 09:30:22 by acher 
syntax host:<path> recognized also now !

rfio/rfio_calls.c: 3.36 95/07/21 16:44:21 by acher 
Set up alarms on read/write/open, if set by adm.

rfio/rfstatfs.c: 1.4 95/08/02 17:53:34 by acher 
FOR SGIs, we have now xfs file systems with block sizes diferent from 512 bytes.

rfio/stat.c: 3.6 95/07/19 12:49:48 by acher 
stat() calls the multiple-stat routine.

rtcopy/rtcopy.shift: 2.64 95/07/21 19:33:19 by acher 
lrecl must be reset .

rtcopy/rtcopy.shift: 2.63 95/07/21 17:19:01 by acher 
tptodkU and dktotpU do not support the -L option, even when returned by tplblinfo

rtcopy/rtcopyd.c: 2.56 95/08/03 19:07:19 by acher 
Accounting records tuned.

rtcopy/rtcopyd.c: 2.55 95/08/02 16:05:05 by acher 
Accounting records added + create RTCOPY directory if unavailable.

rtcopy/tpread.c: 2.55 95/07/20 11:19:46 by acher 
stat replaced by multipled-stat.

config/site.def: 1.16 95/07/21 16:47:02 by acher 
Added alarm file name .

stage/sendrep.c: 1.3 95/08/03 10:24:49 by baud 
replace WRITE by netwrite

stage/stage.h: 1.18 95/08/03 10:27:32 by baud 
remove definition of macros READ and WRITE and define constant LAST_TPFILE

stage/stageacct.c: 1.2 95/07/31 17:06:03 by baud 
avoid warnings during compilation on osf

stage/stager.c: 1.16 95/07/24 09:29:21 by baud 
add missing parenthesis; call getdtablesize instead of using _NFILE for alpha osf

stage/stgdaemon.c: 2.7 95/07/31 17:40:48 by baud 
replace READ by netread because sometime requests arrive in several chunks

stage/stgdaemon.c: 2.6 95/07/24 11:09:51 by baud 
correct code when several subrequests of the same STAGEOUT request are waiting for space

stage/stgdaemon.c: 2.5 95/07/24 09:31:13 by baud 
correct stageinit processing when some requests are in STAGEOUT state; call getdtablesize instead of using _NFILE for alpha osf

************************ VERSION 1.8.1.7 *****************************
rfio/rfio_serv.c: 3.34 95/07/07 12:22:41 by acher 
Keepalive on client data socket.

rtcopy/rtcopy.h: 2.19 95/07/07 12:10:07 by acher 
Keywords added for rtcopy.

rtcopy/rtcopy.shift: 2.62 95/07/07 12:14:17 by acher 
tplblinfo mandatory now.  Bug corrected if appending and disk file size limited.

rtcopy/rtcopyerr.h: 1.4 95/07/07 12:07:53 by acher 
Added new Error and Warning messages.

rtcopy/tptodkF.c: 2.28 95/07/07 12:04:23 by acher 
If sizestart too large, let the request anyway with warning message.

rtcopy/tptodkU.c: 2.25 95/07/07 12:03:19 by acher 
If sizestart too large, let the request anyway with warning message.

************************ VERSION 1.8.1.6 *****************************
rfio/rfio_serv.c: 3.33 95/07/06 12:05:56 by acher 
 Why opening fds 0,1 and 2  on AIX, SGIs, OSF1 ?

rtcopy/Imakefile: 1.21 95/07/05 15:44:30 by acher 
RTCPACCTPAK variable invoked but not used. 

rtcopy/Imakefile: 1.20 95/07/05 15:38:47 by acher 
ACCT flag misspelt !.

************************ VERSION 1.8.1.5 *****************************
common/Imakefile: 1.12 95/06/14 13:22:40 by simmins 
Added getacctent.o & ypgetacctent.o; removed ypgetacct.o to/from COMMONLIB_OBJS

common/getacct.c: 1.8 95/06/14 13:25:12 by simmins 
Better YP(NIS) algorithm implemented to avoid yp_all() bug

NEW file: common/getacct.h(1.1)
common/getacct.h: 1.1 95/06/14 13:28:43 by simmins 
date and time created 95/06/14 13:28:43 by simmins

NEW file: common/getacctent.c(1.1)
common/getacctent.c: 1.1 95/06/14 13:28:44 by simmins 
date and time created 95/06/14 13:28:44 by simmins

NEW file: common/getacctent.h(1.1)
common/getacctent.h: 1.1 95/06/14 13:28:45 by simmins 
date and time created 95/06/14 13:28:45 by simmins

NEW file: common/getacctent.man(1.1)
common/getacctent.man: 1.1 95/06/14 13:31:08 by simmins 
date and time created 95/06/14 13:31:08 by simmins

NEW file: common/ypgetacctent.c(1.1)
common/ypgetacctent.c: 1.1 95/06/14 13:28:46 by simmins 
date and time created 95/06/14 13:28:46 by simmins

NEW file: common/ypgetacctent.h(1.1)
common/ypgetacctent.h: 1.1 95/06/14 13:28:46 by simmins 
date and time created 95/06/14 13:28:46 by simmins

tape/mounttape.c: 1.54 95/06/22 14:03:21 by baud 
write correctly .tplabel file even if the label contains nulls

rfio/connect.c: 3.11 95/06/21 12:08:22 by acher 
getconfent () calls strtok() also !!! 

rfio/rfio_serv.c: 3.32 95/07/04 12:55:15 by hemmer 
Disable read time out

rtcopy/dktotpF.c: 2.26 95/07/03 18:39:30 by acher 
dktotpF.c

rtcopy/dktotpU.c: 2.25 95/07/03 18:38:17 by acher 
if maxsiz is set to the limit ( 2048 MB ) then free gets negative.

rtcopy/rtcopy.h: 2.18 95/06/22 16:02:57 by acher 
RSLCT constant added

rtcopy/rtcopy.shift: 2.61 95/06/26 09:36:13 by acher 
Added number of bytes with net interface.

rtcopy/rtcopy.shift: 2.60 95/06/22 15:43:14 by acher 
 Reselect on another tape server + Taking info from label now + corrected bug with internal -i opt.

rtcopy/rtcopyd.c: 2.54 95/06/22 15:59:01 by acher 
Reselect added .

rtcopy/tpclient.c: 1.2 95/07/05 07:33:00 by hemmer 
Disable read timeouts until a working solution found

rtcopy/tpread.c: 2.54 95/07/05 07:33:01 by hemmer 
Disable read timeouts until a working solution found

rtcopy/tpsinfod.c: 1.3 95/07/05 07:33:03 by hemmer 
Disable read timeouts until a working solution found

rtcopy/tptodkF.c: 2.27 95/07/03 18:41:11 by acher 
 if maxsiz is set to the limit ( 2048 MB ) then free gets negative.

rtcopy/tptodkU.c: 2.24 95/07/03 18:42:17 by acher 
if maxsiz is set to the limit ( 2048 MB ) then free gets negative.

tms/tmsdaemon.c: 1.22 95/06/15 14:44:17 by baud 
call setsid instead of setpgrp for alpha-osf

stage/cleaner.c: 1.4 95/06/27 11:20:04 by baud 
pclose return status in sma format as wait

stage/procclr.c: 1.2 95/06/16 14:38:49 by baud 
make stageclr -p NOPOOL work

stage/procio.c: 1.8 95/06/30 15:31:00 by baud 
add option -z for copytape

stage/procupd.c: 1.2 95/06/30 13:37:40 by baud 
send info for copytape

stage/stage.h: 1.17 95/06/30 13:26:48 by baud 
add message STG47 and copytape flag

stage/stagein.c: 1.19 95/06/30 13:29:56 by baud 
add option -z for copytape

stage/stager.c: 1.15 95/06/30 13:33:48 by baud 
put -b and -F option on tpread/tpwrite only if non null

stage/stgdaemon.c: 2.4 95/06/30 13:39:38 by baud 
send info for copytape

************************ VERSION 1.8.1.4 *****************************
common/Imakefile: 1.11 95/06/02 18:35:27 by acher 
for OSF1 servers, call NIS also for the accounts.

common/Imakefile: 1.10 95/02/15 09:48:41 by hemmer 
UltraNet for Solaris requires -DUNETSOLR to be defined for unet ioctls

common/Imakefile: 1.9 94/12/14 07:03:40 by acher 
getuser() using lex/yacc rewritten in C.

common/Imakefile: 1.8 94/08/16 15:32:45 by baud 
add accounting routine wsacct

common/Imakefile: 1.7 94/05/11 13:30:02 by acher 
-g replaces -O in production versions.

common/Imakefile: 1.6 94/02/09 12:21:02 by acher 
remote.c , solveln.c , user.lex and user.yacc added to common.

common/Imakefile: 1.5 93/10/27 17:08:56 by acher 
on Suns having ULTRA, add the ULTRA flag.

common/Imakefile: 1.4 93/09/08 17:03:41 by acher 
Added solveln.o into libcommon.a.

common/Imakefile: 1.3 93/08/03 16:15:15 by hemmer 
added PPU cpp option flag

common/Imakefile: 1.2 93/05/28 13:52:01 by hemmer 
removed .PRECIOUS line confusing make

common/Imakefile: 1.1 93/02/26 10:46:18 by baud 
date and time created 93/02/26 10:46:18 by baud

common/getacct.c: 1.7 94/07/13 13:23:59 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

common/getacct.c: 1.6 94/06/28 07:47:40 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

common/getacct.c: 1.5 94/06/08 06:39:00 by hemmer 
Add support for VMS DEC C compiler

common/getacct.c: 1.4 91/07/02 17:42:01 by hemmer 
make PATCHY happy (only 80 character long source lines)

common/getacct.c: 1.3 91/05/17 12:01:39 by hemmer 
add Cray and VMS support (FHE)

common/getacct.c: 1.2 91/04/25 13:41:25 by hemmer 
new Makefile scheme

common/getacct.c: 1.1 91/04/11 18:14:04 by hemmer 
date and time created 91/04/11 18:14:04 by hemmer

NEW file: common/ypgetacct.c(1.4)
common/ypgetacct.c: 1.4 92/06/01 11:22:24 by hemmer 
CAST needed for Irix 4.0.1, defining call as (void *).

DELETED file : common/getacct.h (1.1)
DELETED file : common/getacctent.c (1.1)
DELETED file : common/getacctent.h (1.1)
DELETED file : common/getacctent.man (1.1)
DELETED file : common/ypgetacctent.c (1.1)
DELETED file : common/ypgetacctent.h (1.1)
************************ VERSION 1.8.1.3 *****************************
common/Imakefile: 1.12 95/06/12 11:04:41 by simmins 
Added getacctent.o & ypgetacctent.o; removed ypgetacct.o to/from COMMONLIB_OBJS

common/getacct.c: 1.8 95/06/12 11:08:36 by simmins 
Better YP(NIS) algorithm implemented to avoid yp_all() bug

NEW file: common/getacct.h(1.1)
common/getacct.h: 1.1 95/06/12 11:11:47 by simmins 
date and time created 95/06/12 11:11:47 by simmins

NEW file: common/getacctent.c(1.1)
common/getacctent.c: 1.1 95/06/12 11:11:48 by simmins 
date and time created 95/06/12 11:11:48 by simmins

NEW file: common/getacctent.h(1.1)
common/getacctent.h: 1.1 95/06/12 11:11:48 by simmins 
date and time created 95/06/12 11:11:48 by simmins

NEW file: common/getacctent.man(1.1)
common/getacctent.man: 1.1 95/06/12 11:18:51 by simmins 
date and time created 95/06/12 11:18:51 by simmins

NEW file: common/ypgetacctent.c(1.1)
common/ypgetacctent.c: 1.1 95/06/12 11:11:49 by simmins 
date and time created 95/06/12 11:11:49 by simmins

NEW file: common/ypgetacctent.h(1.1)
common/ypgetacctent.h: 1.1 95/06/12 11:11:50 by simmins 
date and time created 95/06/12 11:11:50 by simmins

DELETED file : common/ypgetacct.c (1.4)
************************ VERSION 1.8.1.2 *****************************
tms/tmsdaemon.c: 1.21 95/06/12 09:22:02 by baud 
send ops msg TMS14 when receiving serrno=1016 (connection closed by remote end)

************************ VERSION 1.8.1.1 *****************************
common/socket.c: 1.21 95/06/07 11:08:50 by hemmer 
receive should be read(0 for unix, not recv.

stage/procqry.c: 1.3 95/06/07 17:12:33 by baud 
make stageqry -p NOPOOL work

************************ VERSION 1.8.1.0 *****************************
Major stage enhancements.
common/Imakefile: 1.11 95/06/02 18:35:27 by acher 
for OSF1 servers, call NIS also for the accounts.

common/remote.c: 1.5 95/05/16 11:13:19 by acher 
Should return 0 , 1 or -1

h/rfio.h: 3.26 95/05/17 12:32:45 by acher 
RFIO_NETRETRYOPT options added.

h/sacct.h: 1.4 95/05/16 11:47:10 by baud 
add definitions for rtcopy and stage accounting

tape/Imakefile: 1.20 95/06/01 08:22:18 by baud 
install man page conditionally

tape/Imakefile: 1.19 95/04/30 10:10:11 by baud 
defines NOTMSDAEMON

tape/asc2ebc.c: 1.3 95/05/15 09:24:48 by baud 
add len parameter and change translation table to include control characters

tape/dmpfil.c: 1.20 95/06/01 08:34:33 by baud 
stop dumptape when detecting blank tape

tape/dumptape.man: 1.3 95/05/31 14:20:26 by baud 
specifies all options correctly and does not refer to tpmnt man page

tape/ebc2asc.c: 1.3 95/05/15 09:27:13 by baud 
add len parameter and change translation table to include control characters

tape/mounttape.c: 1.53 95/06/01 10:31:55 by baud 
call tms when tape is mounted, not when tape is positionned

tape/mounttape.c: 1.52 95/05/14 08:37:31 by baud 
add header length to calls to asc2ebc and ebc2asc

tape/posittape.c: 1.22 95/05/14 08:39:31 by baud 
add header length to calls to ebc2asc

tape/readlbl.c: 1.16 95/06/01 09:23:26 by baud 
call gettperror instead of doing an MTIOCGET locally for sun

tape/readlbl.c: 1.15 95/05/22 08:08:46 by baud 
DEC alphas return ENOSPC for blank tape

tape/tape.h: 1.42 95/06/04 08:47:11 by baud 
suppress flag rewind/norewind

tape/taperr.h: 1.2 95/06/06 09:20:43 by baud 
add ETNOSNS to the list of possible tape status

tape/tpdaemon.c: 1.57 95/06/06 13:49:50 by baud 
add to accounting the length of the queue of requests waiting for devices; remove the rewind/norewind flag; check if the requested density exists at all on the server

tape/tpdaemon.man: 1.4 95/06/04 08:45:07 by baud 
suppress flag rewind/norewind

tape/tperror.c: 1.7 95/06/06 10:32:48 by baud 
add status ETNOSNS; suppress code for ADSTAR

tape/tperror.c: 1.6 95/06/01 11:01:36 by baud 
mt_erreg value cannot exceed 15 except for sun; set mt_rescnt for DEC alphas

tape/tplabel.man: 1.5 95/05/31 15:34:02 by baud 
add densities for DLT and modify device group description

tape/tplabel.man: 1.4 95/05/12 11:30:52 by baud 
some exit codes were not documented

tape/tpmnt.man: 1.15 95/05/31 15:42:16 by baud 
modify device group description

tape/tpmnt.man: 1.14 95/05/31 15:16:30 by baud 
add densities for DLT

tape/tpmnt.man: 1.13 95/05/12 11:14:18 by baud 
some exit codes were not documented

tape/unloadtps.c: 1.17 95/06/04 08:43:07 by baud 
wait if drive busy

tape/usrlbl.c: 1.12 95/05/14 08:41:51 by baud 
add header length to calls to asc2ebc and ebc2asc

rfio/Imakefile: 1.25 95/05/12 12:27:45 by hemmer 
NOMORERFIO defined

rfio/connect.c: 3.10 95/05/17 12:30:40 by acher 
check if RFIO_NETRETRYOPT is set or not.

rfio/rfcp.c: 1.11 95/05/17 17:38:06 by acher 
\n missing 

rfio/rfcp.c: 1.10 95/05/17 12:43:10 by acher 
Esthetic + if rfio_read() fails, return SYERR.

rfio/setopt.c: 1.2 95/05/17 12:27:32 by acher 
RFIO_NETRETRYOPT added to prevent from staying too long in the retry if required.

rtcopy/Imakefile: 1.19 95/05/31 14:24:50 by baud 
add dumptape man page

rtcopy/Imakefile: 1.18 95/05/22 12:28:44 by acher 
Accounting added.

rtcopy/Imakefile: 1.17 95/05/15 17:15:05 by acher 
DLT statistics function called.

rtcopy/dktotpF.c: 2.25 95/05/15 18:08:08 by acher 
1 twrite() forgotten.

rtcopy/dktotpF.c: 2.24 95/05/15 17:51:18 by acher 
bug in call of asc2ebc() corrected.

rtcopy/dktotpF.c: 2.23 95/05/15 17:13:44 by acher 
ascii/ebcdic conversion.

rtcopy/dktotpU.c: 2.24 95/05/15 17:11:17 by acher 
ebcdic/ascii conversion

NEW file: rtcopy/dumptape.man(1.1)
rtcopy/dumptape.man: 1.1 95/05/31 13:30:34 by baud 
date and time created 95/05/31 13:30:34 by baud

rtcopy/rtcopy.h: 2.17 95/05/15 17:17:47 by acher 
Structure for compression status added.

rtcopy/rtcopy.h: 2.16 95/05/12 14:30:03 by acher 
ACKN_DPTP & RQST_DPTP for dump tape.

rtcopy/rtcopy.shift: 2.59 95/05/15 17:19:51 by acher 
ebcdic option propagated.

rtcopy/rtcopyd.c: 2.53 95/05/22 12:27:31 by acher 
Accounting added.

rtcopy/rtcopyerr.h: 1.3 95/05/15 17:02:50 by acher 
Added messages for EBCDIC <> ASCII conversions.

NEW file: rtcopy/rtcpacct.c(1.1)
rtcopy/rtcpacct.c: 1.1 95/05/19 14:35:56 by marisa 
date and time created 95/05/19 14:35:56 by marisa

rtcopy/tpread.c: 2.53 95/05/15 17:22:17 by acher 
options for ebcdic/ascii conversions.

rtcopy/tpread.man: 1.13 95/05/16 09:52:43 by acher 
-C option added.

rtcopy/tptodkF.c: 2.26 95/05/15 17:04:56 by acher 
ebcdic / ascii conversions.

rtcopy/tptodkU.c: 2.23 95/05/15 17:06:52 by acher 
ascii/ ebcdic conversions added .

sysreq/netreq.c: 1.22 95/05/04 16:18:29 by baud 
declare getenv as char*

stage/Imakefile: 1.7 95/05/19 17:18:50 by baud 
add stageinit man page

stage/Imakefile: 1.6 95/05/08 20:56:41 by baud 
split of stgdaemon.c into several pieces and add stagealloc

stage/buildupath.c: 1.5 95/06/05 09:21:37 by baud 
proccess correctly links in /shift; retry in case getcwd returns ETIMEDOUT

stage/buildupath.c: 1.4 95/05/09 21:02:12 by baud 
symbolic links are not supported in VMS

stage/cpdskdsk.sh: 1.3 95/05/17 21:12:23 by baud 
print statistics only when rfcp is successful

stage/cpdskdsk.sh: 1.2 95/05/15 21:37:39 by baud 
send statistics to user log

NEW file: stage/procalloc.c(1.3)
stage/procalloc.c: 1.3 95/05/31 16:06:24 by baud 
size parameter must be smaller than 2048 (2 Gbytes)

NEW file: stage/procclr.c(1.1)
stage/procclr.c: 1.1 95/05/08 21:01:51 by baud 
date and time created 95/05/08 21:01:51 by baud

NEW file: stage/procio.c(1.7)
stage/procio.c: 1.7 95/06/06 11:47:00 by baud 
add second syntax for stageput with -q and -V options

NEW file: stage/procqry.c(1.2)
stage/procqry.c: 1.2 95/05/15 15:30:58 by baud 
print_pool_utilization does not return any value

NEW file: stage/procupd.c(1.1)
stage/procupd.c: 1.1 95/05/08 21:03:24 by baud 
date and time created 95/05/08 21:03:24 by baud

stage/send2stgd.c: 1.15 95/05/10 08:00:10 by baud 
modify message STG09 to print error string instead of error number

stage/send2stgd.c: 1.14 95/05/08 21:15:08 by baud 
add code for VMS

stage/stage.h: 1.16 95/05/31 21:13:54 by baud 
add message STG46; do not define catalog structures if vms

stage/stage.h: 1.15 95/05/18 15:42:38 by baud 
add size information in STG96 message

stage/stage.h: 1.14 95/05/11 11:40:04 by baud 
add Pflag in waitq structure for -P option in stagealloc

stage/stage.h: 1.13 95/05/10 07:57:12 by baud 
modify message STG09 to print error string instead of error number

stage/stage.h: 1.12 95/05/08 20:59:01 by baud 
add STAGEALLOC, -C option, VMS constants and messages

NEW file: stage/stageacct.c(1.1)
stage/stageacct.c: 1.1 95/05/16 11:39:00 by baud 
date and time created 95/05/16 11:39:00 by baud

NEW file: stage/stagealloc.c(1.2)
stage/stagealloc.c: 1.2 95/05/11 11:38:43 by baud 
add option -P

NEW file: stage/stagealloc.man(1.3)
stage/stagealloc.man: 1.3 95/05/31 16:03:10 by baud 
size parameter must be smaller than 2048 (2 Gbytes)

stage/stageclr.c: 1.7 95/05/31 21:23:33 by baud 
use message STG46 instead of message STG12

stage/stageclr.man: 1.3 95/05/18 15:36:20 by baud 
add description of -I option

stage/stagein.c: 1.18 95/06/02 09:19:07 by baud 
add missing newline in tms error message

stage/stagein.c: 1.17 95/05/10 14:24:12 by baud 
correct typo which made test on /afs useless

stage/stagein.c: 1.16 95/05/08 21:07:11 by baud 
add option -C and code for VMS

stage/stagein.man: 1.15 95/05/31 15:13:17 by baud 
add densities for DLT

stage/stagein.man: 1.14 95/05/30 09:25:12 by baud 
size parameter must be smaller than 2048 (2 Gbytes)

stage/stagein.man: 1.13 95/05/18 15:39:52 by baud 
add description of -I option

stage/stagein.man: 1.12 95/05/09 15:09:58 by baud 
add option -C

NEW file: stage/stageinit.man(1.1)
stage/stageinit.man: 1.1 95/05/19 17:20:17 by baud 
date and time created 95/05/19 17:20:17 by baud

stage/stageput.c: 1.5 95/06/06 10:58:03 by baud 
add second syntax with -q and -V options

stage/stageput.c: 1.4 95/05/08 21:08:35 by baud 
add code for VMS

stage/stageput.man: 1.3 95/06/06 11:48:46 by baud 
add second syntax with -q and -V options

stage/stageqry.man: 1.9 95/05/18 15:38:17 by baud 
add description of -I option

stage/stager.c: 1.14 95/05/22 18:12:59 by baud 
correct problem with multiple fids

stage/stager.c: 1.13 95/05/15 10:25:08 by baud 
increase cmdname to 9 bytes because of the command cpdskdsk

stage/stager.c: 1.12 95/05/08 21:13:00 by baud 
add option -C

stage/stgdaemon.c: 2.3 95/05/18 15:47:37 by baud 
add size information in STG96 message and send it to user log also

stage/stgdaemon.c: 2.2 95/05/11 11:35:45 by baud 
add option -P for stagealloc

stage/stgdaemon.c: 2.1 95/05/11 06:39:36 by baud 
split stgdaemon.c into stgdaemon.c + proc*.c

NEW file: stage/stgdaemon.c.pro(1.30)
stage/stgdaemon.c.pro: 1.30 95/04/13 08:33:01 by baud 
avoid crash if stageqry -L without -V or -I

stage/stgdaemon.man: 1.8 95/05/18 14:46:22 by baud 
add file size in STG96 messages

************************ VERSION 1.7.5.11 *****************************
common/serror.c: 1.26 95/04/28 13:16:08 by hemmer 
Added SERTYEXHAUST code.

common/socket.c: 1.20 95/04/28 13:23:46 by hemmer 
Added non blocking read code.

h/rfio.h: 3.25 95/04/28 13:13:24 by hemmer 
Added default retry counts and intervals

h/serrno.h: 1.16 95/04/28 13:15:06 by hemmer 
Added SERTYEXHAUST code.

tape/mounttape.c: 1.51 95/04/12 13:41:06 by baud 
move call to closelmcp from mounttape to rbtsubr to avoid "Bad file number" in case of reselect

tape/rbtsubr.c: 1.2 95/04/12 13:32:26 by baud 
move call to closelmcp from mounttape to rbtsubr to avoid "Bad file number" in case of reselect; initialize mtlqmidarg in mount3495

tape/usrlbl.c: 1.11 95/04/07 14:27:26 by baud 
accept parity error in trailer label if option -T is given

rfio/connect.c: 3.9 95/04/28 13:21:49 by hemmer 
Added NOMORERFIO suspend mode and cosmetics changes

rfio/parse.c: 3.10 95/04/26 16:40:00 by acher 
The VMS syntax was not expected by latest mod !

rfio/parse.c: 3.9 95/04/26 13:05:46 by acher 
Looking for ":/" instead of '/' to decide of the filepath format.

rfio/rfcp.c: 1.9 95/04/20 12:48:54 by acher 
#endif misplaced.

rtcopy/Imakefile: 1.16 95/04/19 16:48:54 by acher 
dumptape compiled and installed.

NEW file: rtcopy/dumptape.c(1.1)
rtcopy/dumptape.c: 1.1 95/04/19 16:44:05 by acher 
date and time created 95/04/19 16:44:05 by acher

rtcopy/rtcopyd.c: 2.52 95/04/19 16:47:30 by acher 
 Introduced mods for dumptape.

NEW file: rtcopy/tpclient.c(1.1)
rtcopy/tpclient.c: 1.1 95/04/19 16:45:23 by acher 
date and time created 95/04/19 16:45:23 by acher

rtcopy/tpread.c: 2.52 95/04/28 10:41:42 by acher 
Ported to SOLARIS for version 2.4 : select() is buggy, using poll() ( SYSVR4 ) instead.

sysreq/netreq.c: 1.21 95/04/24 16:51:06 by hemmer 
Now always return negative codes.

sysreq/sysreq.c: 1.12 95/04/08 09:28:20 by baud 
increase RECLEN to 256

stage/Imakefile: 1.5 95/04/24 11:49:11 by baud 
add stagecat man page

stage/poolmgr.c: 1.12 95/04/27 10:13:08 by baud 
remove double free in stageinit processing to avoid stgdaemon crashes

stage/stagein.man: 1.11 95/04/28 09:44:12 by baud 
document ENOSPC return code

stage/stagein.man: 1.10 95/04/24 11:56:08 by baud 
add missing file parameter on stagecat

stage/stgdaemon.c: 1.30 95/04/13 08:33:01 by baud 
avoid crash if stageqry -L without -V or -I

************************ VERSION 1.7.5.10 *****************************
rtcopy/rtcopyd.c: 2.51 95/04/04 12:35:58 by acher 
SOLARIS requires strlen() value to be cast before > or <.

dpm/dpm/disk.c: 3.11 95/04/04 16:16:12 by hemmer 
when used with RFIO, HP/UX refused gethostname redefinition

stage/buildupath.c: 1.3 95/04/04 15:06:36 by baud 
add explicit cast on strlen to avoid warnings on SOLARIS

************************ VERSION 1.7.5.9 *****************************
h/net.h: 1.4 95/04/03 15:31:23 by hemmer 
Invalid comments for netxxxx() routines

msg/msg.c: 1.12 95/03/30 13:32:51 by baud 
initialize serrno to 0 at beginning of each routine

tape/dumptape.sh: 1.8 95/03/31 08:22:57 by baud 
add path BIN to tmsreq

tape/mounttape.c: 1.50 95/03/30 16:44:03 by baud 
log the operator message id when acknowledge received; display correctly serrno or errno value after an operator msg routine failure

rtcopy/tpread.c: 2.51 95/04/03 10:20:59 by acher 
buffer limit 2048 changed to SYCONFLIM .

sysreq/sysreqf.c: 1.21 95/03/31 14:52:29 by acher 
malloc'ed char tables require explicit cast on OSF1 since malloc is (void *)malloc().

config/site.def: 1.15 95/04/03 14:57:21 by hemmer 
include files should go in /usr/local/include rather than on system dirs.

stage/send2stgd.c: 1.13 95/04/03 14:00:07 by baud 
replace close by netclose; do not define RFIO_KERNEL and include "net.h" to avoid double inclusion of sys/socket.h and netdb.h that give compilation errors on Ultrix and VMS

stage/stgdaemon.c: 1.29 95/04/03 15:14:04 by baud 
correct illegal assignment in routine build_ipath

stage/stgdaemon.c: 1.28 95/03/30 17:45:00 by baud 
correct processing of stageout without linkname; correct also processing of stageclr of a stageout request waiting for space

************************ VERSION 1.7.5.8 *****************************
common/serror.c: 1.25 95/03/09 10:34:52 by simmins 
Added error message for rename()

common/serror.c: 1.24 95/02/21 09:31:47 by hemmer 
DECC v4.0 does defined __ERRNO_MAX instead of MAXX_ERRNO_VALUE

h/rfio.h: 3.24 95/03/28 12:17:57 by hemmer 
net.h now included.

h/rfio.h: 3.23 95/03/01 10:23:04 by hemmer 
declare rfio_parseln()

h/sysreq.h: 1.6 95/03/28 12:03:59 by hemmer 
malloc() now defined in stdlib

h/sysreq.h: 1.5 95/03/10 16:29:34 by hemmer 
malloc now defined in stdlib.h

tape/Imakefile: 1.18 95/03/22 08:17:10 by baud 
take TMS flag into account when building tpdump

tape/dumptape.man: 1.2 95/03/22 08:25:50 by baud 
modify return codes to be compatible with rtcopy

tape/dumptape.sh: 1.7 95/03/22 08:40:24 by baud 
make dumptape work if TMS not installed; test tmsreq return codes; modify return codes to be compatible with rtcopy

tape/mounttape.c: 1.49 95/03/22 08:10:42 by baud 
test reopen return code in case of prelabel

rfio/access.c: 1.3 95/03/01 09:56:05 by hemmer 
netclose() rather than close()

rfio/error.c: 3.12 95/02/21 08:40:33 by hemmer 
Network close instead of normal close.

rfio/logging.c: 1.8 95/03/16 11:46:58 by fabien 
A memory leak has been fixed

rfio/lstat.c: 1.3 95/03/01 11:25:10 by hemmer 
VMS support, LOCAL_IO removed, close() now netclose()

rfio/rfio_calls.c: 3.35 95/03/27 14:28:55 by hemmer 
typo in ropen error message (chsuser).

rfio/rfio_calls.c: 3.34 95/03/14 17:30:09 by acher 
\n was not set in the right place in log() display.

rtcopy/rtcopy.h: 2.15 95/03/29 10:30:53 by acher 
SYCONFLIM limit for command line.

rtcopy/rtcopyd.c: 2.50 95/03/29 10:26:15 by acher 
Command buffer increased to larger limit to increase command line.

sysreq/netreq.c: 1.20 95/02/15 13:42:13 by hemmer 
Connection dropped while receiving now handled correctly

sysreq/sysreq.c: 1.11 95/03/10 16:28:30 by hemmer 
now uses stdlib.h

dpm/util/Imakefile: 1.4 95/03/21 10:15:02 by acher 
HP's make does not appreciate \ at end of lines.

dpm/parser/Imakefile: 1.6 95/03/21 10:15:39 by acher 
 HP's make does not appreciate \ at end of lines.

dpm/parser/Imakefile: 1.5 95/03/02 08:23:00 by acher 
If DpmUsesRfio is set , link to rfio and common libs.

dpm/dpm/Imakefile: 1.10 95/03/21 10:16:14 by acher 
 HP's make does not appreciate \ at end of lines.

dpm/dpm/Imakefile: 1.9 95/03/02 08:24:09 by acher 
If DpmUsesRfio is set , link to rfio and common libs.

config/site.def: 1.14 95/03/29 09:18:02 by baud 
add comment about ADSTAR flag

stage/buildupath.c: 1.2 95/03/13 08:09:50 by baud 
check for ":/" instead of ':' because Load Leveller puts colons in directory names

stage/packfseq.c: 1.4 95/03/13 11:02:47 by baud 
check if there is enough space in fseq buffer

stage/poolmgr.c: 1.11 95/03/13 08:47:06 by baud 
allow for pool elements with different blocksizes + print pool capacity and free space

stage/poolmgr.c: 1.10 95/03/06 14:18:53 by baud 
avoid stgdaemon crash for stageqry -s if stafs in getpoolconf failed

stage/send2stgd.c: 1.12 95/03/23 11:37:27 by baud 
does not retry unlink in /afs if root; dosymlink does not do unlink itself; does not give an error if symlink fails with EEXIST

stage/stage.h: 1.11 95/03/22 11:58:36 by baud 
increase REQBUFSZ to 20000

stage/stage.h: 1.10 95/03/15 17:27:28 by baud 
modify message STG12

stage/stage.h: 1.9 95/03/13 08:04:54 by baud 
add message STG44 and some comments

NEW file: stage/stagecat.man(1.1)
stage/stagecat.man: 1.1 95/03/13 11:15:11 by baud 
date and time created 95/03/13 11:15:11 by baud

stage/stagein.c: 1.15 95/03/15 17:29:26 by baud 
move test on presence of vsn, vid or external file to daemon to get more precise error messages

stage/stagein.c: 1.14 95/03/13 08:17:40 by baud 
make linknames optional for stageout and does not accept to stage in a AFS directory if -p NOPOOL

stage/stagein.man: 1.9 95/03/13 11:11:51 by baud 
stageout linknames are now optional

stage/stageqry.c: 1.5 95/03/23 17:49:52 by baud 
add options -L and -T

stage/stageqry.man: 1.8 95/03/24 08:12:27 by baud 
add options -L and -T

stage/stageqry.man: 1.7 95/03/13 10:48:46 by baud 
add weight formula and modify output examples to cope with files lbigger than 1 GB

stage/stager.c: 1.11 95/03/13 08:28:25 by baud 
allow for longer fseq strings

stage/stgdaemon.c: 1.27 95/03/23 11:40:07 by baud 
add options -L and -T to stageqry; send unlink before symlink if necessary

stage/stgdaemon.c: 1.26 95/03/15 17:33:14 by baud 
avoid crashes if statfs fail; handle specially requests for /afs; modify stageqry output to allow for files bigger than 1GB....

stage/stgdaemon.man: 1.7 95/03/13 11:06:10 by baud 
modify stage_clean example to be compatible with new stageqry output (column 31 instead of 30)

************************ VERSION 1.7.5.7 *****************************
common/Imakefile: 1.10 95/02/15 09:48:41 by hemmer 
UltraNet for Solaris requires -DUNETSOLR to be defined for unet ioctls

tape/dmpfil.c: 1.19 95/02/13 21:02:00 by baud 
if errno == EIO, calls gettperror, else use sys_errlist

tape/readlbl.c: 1.14 95/02/13 15:47:19 by baud 
add support for ADSTAR driver

rfio/Imakefile: 1.24 95/02/02 16:52:58 by acher 
Clientlogging masks the Domainname,

rtcopy/dktotpF.c: 2.22 95/02/03 08:42:24 by acher 
If -N specified, return LIMBYSZ .     

rtcopy/dktotpU.c: 2.23 95/02/03 08:41:10 by acher 
 If -N specified, return LIMBYSZ .     

rtcopy/rtcopy.shift: 2.58 95/02/02 20:53:21 by acher 
Total number of bytes sum is in KBytes to avoid overflow (2 GB), bug corrected for stager when newpath is given $retries times.

rtcopy/tpread.c: 2.50 95/02/09 20:45:16 by acher 
close socket before retry in case of a ETMUSR message sent back from server .

rtcopy/tptodkF.c: 2.25 95/02/03 08:37:26 by acher 
If -N specified, return LIMBYSZ .

rtcopy/tptodkU.c: 2.22 95/02/03 08:39:17 by acher 
If -N specified, return LIMBYSZ .     

tms/tmsexit.c: 1.7 95/02/03 17:45:53 by baud 
use varargs for umsg routine to avoid problems on OSF machines

stage/getlisttp.c: 1.2 95/02/14 16:31:11 by baud 
correct processing of multiple vids

stage/poolmgr.c: 1.9 95/02/02 07:30:35 by baud 
free also previous poolc array after a successful stageinit

stage/poolmgr.c: 1.8 95/02/01 17:40:44 by baud 
correct problems with stageinit (stgdaemon crashing on SGI)

stage/stgdaemon.c: 1.25 95/02/03 08:47:23 by baud 
at startup, change status from STAGEPUT to PUT_FAILED

stage/stgdaemon.c: 1.24 95/02/02 08:45:07 by baud 
if stagewrt/stageput subrequest fails, abort subsequent subrequests for same request; in check_waiting_on_req, if build_ipath fails creating directory, abort the request

************************ VERSION 1.7.5.6 *****************************
./Imakefile: 1.5 95/02/01 13:45:32 by hemmer 
Added export rule

lib/Imakefile: 1.3 95/02/01 13:45:39 by hemmer 
Added export rule

fhs/Imakefile: 1.3 95/02/01 13:46:37 by hemmer 
Added export rule

tape/mounttape.c: 1.48 95/01/30 13:58:19 by baud 
add closelmcp in case of reselect on IBM robot unit to avoid the message "Device not configured"

rfio/Imakefile: 1.23 95/02/01 13:45:55 by hemmer 
Added export rule

rtcopy/Imakefile: 1.15 95/02/01 13:46:23 by hemmer 
Added export rule

sysreq/Imakefile: 1.6 95/02/01 13:46:49 by hemmer 
Added export rule

dpm/Imakefile: 1.2 95/02/01 13:46:56 by hemmer 
Added export rule

dpm/h/Imakefile: 1.2 95/02/01 13:47:00 by hemmer 
Added export rule

dpm/util/Imakefile: 1.3 95/02/01 13:47:08 by hemmer 
Added export rule

dpm/parser/Imakefile: 1.4 95/02/01 13:47:16 by hemmer 
Added export rule

dpm/dpm/Imakefile: 1.8 95/02/01 13:47:23 by hemmer 
Added export rule

commands/Imakefile: 1.2 95/02/01 13:46:29 by hemmer 
Added export rule

config/Imake.rules: 1.2 95/02/01 13:45:05 by hemmer 
Added IEXPORT macro to ease software exportation

stage/Imakefile: 1.4 95/02/01 13:46:17 by hemmer 
Added export rule

************************ VERSION 1.7.5.5 *****************************
h/rfio.h: 3.22 95/01/20 14:58:28 by acher 
New primitives for multiple stat() requests.

rfio/rfio_serv.c: 3.31 95/01/20 14:23:30 by acher 
Multiple stat() modifications.

stage/stager.c: 1.10 95/01/25 13:27:33 by baud 
if command is STAGEPUT, tpwrite should be called

stage/stgdaemon.c: 1.23 95/01/26 08:43:18 by baud 
correct reqid in stager log when stagein request cleared by stageclr

stage/stgdaemon.c: 1.22 95/01/25 15:06:06 by baud 
do not define RFIO_KERNEL because of MAXHOSTNAMELEN; correct code in check_delete routine

************************ VERSION 1.7.5.4 *****************************
rfio/xyclose.c: 3.9 95/01/18 18:06:43 by hemmer 
Added -qextname preprocessor flag support

rfio/xyopen.c: 3.17 95/01/18 18:06:42 by hemmer 
Added -qextname preprocessor flag support

rfio/xyread.c: 3.11 95/01/18 18:06:44 by hemmer 
Added -qextname preprocessor flag support

rfio/xywrite.c: 3.11 95/01/18 18:06:45 by hemmer 
Added -qextname preprocessor flag support

sysreq/sysreqf.c: 1.20 95/01/18 18:06:57 by hemmer 
Added -qextname preprocessor flag support

config/aix.cf: 1.2 95/01/18 17:56:58 by hemmer 
Added extname preprocessor default

************************ VERSION 1.7.5.3 *****************************
tape/tperror.c: 1.5 95/01/17 08:29:47 by baud 
there are now 23 different errors for SCSI devices

stage/send2stgd.c: 1.11 95/01/17 20:06:28 by baud 
code cleanup + correct parameters for rfio_parseln

stage/stagein.c: 1.13 95/01/18 08:45:09 by baud 
define RFIO_KERNEL 1

stage/stager.c: 1.9 95/01/18 09:28:41 by baud 
introduce cast of fseq_list to char * to avoid warnings on IRIX

stage/stgdaemon.c: 1.21 95/01/18 09:38:00 by baud 
introduce cast of fseq_list to char * to avoid warnings on IRIX + code cleanup + add parentheses because of operator precedence

************************ VERSION 1.7.5.2 *****************************
tape/Imakefile: 1.17 95/01/09 14:04:45 by baud 
if Accounting is not defined, do not put the rule for building sacct spool

rfio/rfio_calls.c: 3.33 95/01/16 10:56:27 by acher 
If link or unlink fails, print error code in log.

rfio/rfio_calls.c: 3.32 95/01/13 17:07:35 by acher 
umask(0) added to prevent daemon's current mask from changing user's request in mkdir() mode.

rtcopy/dktotpF.c: 2.21 95/01/13 17:34:28 by acher 
-s control test modified.

rtcopy/dktotpU.c: 2.22 95/01/13 17:33:01 by acher 
sequence for -s control modified.

rtcopy/rtcopy.h: 2.14 95/01/16 14:21:48 by acher 
SYRETRYPARITY code is new.

rtcopy/rtcopy.h: 2.13 95/01/13 17:49:35 by acher 
defined new flags

rtcopy/rtcopy.shift: 2.57 95/01/16 17:21:31 by acher 
skip and keep in the same time...

rtcopy/rtcopy.shift: 2.56 95/01/16 14:23:33 by acher 
SYRETRYPARITY code is issued if a parity error occurs and -E is set.

rtcopy/rtcopy.shift: 2.55 95/01/13 17:45:11 by acher 
Added history on -s option in case of file concatenation , SYRETRYUSERR retry mode.

rtcopy/rtcopyd.c: 2.49 95/01/13 17:48:04 by acher 
Some comments modified + LIMBYSZ does not give error any more.

rtcopy/rtcopyerr.h: 1.2 95/01/13 17:36:09 by acher 
Added messages.

rtcopy/rtyexit.c: 1.5 95/01/16 14:26:45 by acher 
SYRETRYPARITY code can be inserted in /etc/shift.conf: retries in case of parity error and exits with MNYPARY if retries fail.

rtcopy/rtyexit.c: 1.4 95/01/13 17:53:55 by acher 
Added SYRETRYUSERR retry flag.

rtcopy/tpio.c: 1.26 95/01/16 14:20:44 by acher 
If -E specified and parity errors, exit after retries with MNYPARY.

rtcopy/tpio.c: 1.25 95/01/13 17:51:21 by acher 
If -E specified and an error occurs (PARITY), adopt different behaviour.

rtcopy/tpread.c: 2.49 95/01/13 17:46:29 by acher 
If file limited by size, exit with non error code

rtcopy/tptodkF.c: 2.24 95/01/13 17:29:06 by acher 
modified test for -s control. AFS files prohibited.

rtcopy/tptodkU.c: 2.21 95/01/13 17:31:29 by acher 
AFS files prohibited ( no token available ) + modified -s control test.

stage/send2stgd.c: 1.10 95/01/16 15:21:32 by baud 
do not return the unlink return code; forks an overlay only if called by root

stage/stageqry.man: 1.6 95/01/05 16:28:51 by baud 
document status STAGED_TPE and PUT_FAILED

stage/stager.c: 1.8 95/01/16 10:26:23 by baud 
size field in stgcat entry is an integer not a string

stage/stgdaemon.c: 1.20 95/01/16 21:28:59 by baud 
correct processing of MNYPARI and -E keep

stage/stgdaemon.man: 1.6 95/01/04 15:29:49 by baud 
change stageqry option from -P to -S in stage_clean example

************************ VERSION 1.7.5.1 *****************************
tape/posittape.c: 1.21 94/12/21 10:11:08 by baud 
add message TP045

tape/tape.h: 1.41 94/12/21 09:34:42 by baud 
add message TP045

rfio/rfio_calls.c: 3.31 94/12/20 19:07:01 by acher 
Error in conditional statement in line 1797: if root , do not test gid validity.

rtcopy/rtcopy.shift: 2.54 94/12/20 13:34:07 by baud 
remove debugging info CONCAT

config/site.def: 1.13 94/12/21 07:30:40 by acher 
We should not follow links by default: it involves an overhead the installer must be aware of.

************************ VERSION 1.7.5.0 *****************************
common/Imakefile: 1.9 94/12/14 07:03:40 by acher 
getuser() using lex/yacc rewritten in C.

NEW file: common/getuser.c(1.1)
common/getuser.c: 1.1 94/12/06 19:07:28 by acher 
date and time created 94/12/06 19:07:28 by acher

h/sacct.h: 1.3 94/12/13 16:38:03 by hemmer 
On SUNOS, uid, gid are 16 bits - fix this for a common representation.

h/sacct.h: 1.2 94/12/07 09:26:18 by hemmer 
Add SYSTEM package

tape/Imakefile: 1.16 94/12/17 11:02:33 by baud 
replace 3495subr by rbtsubr to include TL820 support thru DECnsr

tape/cvtden.c: 1.5 94/12/17 10:35:13 by baud 
add 38K as alias for density 38000

tape/mounttape.c: 1.47 94/12/17 10:48:04 by baud 
group robot calls in rbtsubr, takes dvn as new parameter, puts unm, vid, dvn in first position on the parameter list

tape/posittape.c: 1.20 94/12/17 10:57:12 by baud 
put file sequence number in message TP024

NEW file: tape/rbtsubr.c(1.1)
tape/rbtsubr.c: 1.1 94/12/17 10:53:45 by baud 
date and time created 94/12/17 10:53:45 by baud

tape/readlbl.c: 1.13 94/11/10 15:06:20 by baud 
allow to write files on blank tapes if declared as NL

tape/tape.h: 1.40 94/12/17 11:00:14 by baud 
modifies messages TP024 and TP041, add message TP044, add dvn to reselect reply

tape/tapeacct.c: 1.4 94/11/07 14:06:26 by baud 
"wrong ring status" instead of "wrong ring"

tape/tpdaemon.c: 1.56 94/12/17 11:06:32 by baud 
call setsid instead of setpgrp for alpha-osf, add dvn to reselect reply, change parametr list order for mounttape and unloadtps

tape/tperror.c: 1.4 94/11/03 16:51:02 by baud 
return "Interface Check" instead of "no sense data available" if number_sense == 0

tape/unloadtps.c: 1.16 94/12/17 10:52:40 by baud 
group robot calls in rbtsubr, puts unm, vid, dvn in first position on the parameter list

rfio/Imakefile: 1.22 94/12/14 07:06:28 by acher 
Lex and Yacc libraries not needed anymore.

rfio/Imakefile: 1.21 94/10/17 13:05:36 by acher 
Compilation option to  trigger on remote links following

rfio/access.c: 1.2 94/10/17 12:12:28 by acher 
access() should not follow links !

rfio/chown.c: 1.2 94/10/17 12:11:16 by acher 
chown () should not follow links !

rfio/error.c: 3.11 94/10/21 19:21:24 by acher 
restoring rfio_errno after fetching the error message.

rfio/logging.c: 1.7 94/10/17 18:11:16 by fabien 
Client I/O logging now follows symb links : rfio_logop changed, no more rfio_parse

rfio/lstat.c: 1.2 94/10/17 12:14:43 by acher 
lstat() should not follow links !

rfio/mkdir.c: 1.3 94/10/17 12:16:50 by acher 
mkdir () does not need the links following overhead.

rfio/open.c: 3.14 94/10/17 17:32:39 by fabien 
Client I/O logging now follows symb links : rfio_logop has now 4 parameters

rfio/parse.c: 3.8 94/10/17 13:07:34 by acher 
Compilation Flag to start up link following.

rfio/parse.c: 3.7 94/10/14 15:57:45 by acher 
Following links now to avoid NFS traffic.

rfio/readlink.c: 1.3 94/10/14 15:59:15 by acher 
parse() in readlink() should not follow links !

rfio/rename.c: 1.2 94/10/17 12:18:13 by acher 
rename() should not follow links.

rfio/rfcp.c: 1.8 94/12/14 06:57:24 by acher 
If input file is a directory or a caracter file or a block file, abort.

rfio/rfcp.c: 1.7 94/11/11 13:10:02 by acher 
test endtime-starttime first before using it.

rfio/rfcp.c: 1.6 94/11/11 12:31:24 by acher 
If files were identical, source was emptied. 

rfio/rfio_calls.c: 3.30 94/11/21 14:53:40 by acher 
fields st_blksize and st_blocks of stat structure implemented.

rfio/rfio_calls.c: 3.29 94/11/14 12:46:10 by acher 
root accounts don't have the same (uid,gid) on all platforms.

rfio/rfio_calls.c: 3.28 94/11/10 19:50:04 by acher 
log format changed to get operation status.

rfio/rfio_calls.c: 3.27 94/10/13 19:26:30 by acher 
homogenized the use of chsuser() in sropen(). Will prevent users not locally registered from opening a file from a machine of the same network.

rfio/stat.c: 3.5 94/11/21 14:51:58 by acher 
Protocol modified: # of block and block size implemented.

rfio/stat.c: 3.4 94/10/17 12:19:35 by acher 
stat() should not follow links.

rtcopy/Imakefile: 1.14 94/12/17 11:26:36 by baud 
add dependency on rtcopyerr.h

rtcopy/Imakefile: 1.13 94/12/14 08:11:39 by acher 
Do not link with lex and yacc any more.

rtcopy/dktotpF.c: 2.20 94/12/17 11:18:59 by baud 
use messages from rtcopyerr.h

rtcopy/dktotpF.c: 2.19 94/11/25 09:46:52 by acher 
tpon changeable from tpio.c

rtcopy/dktotpU.c: 2.21 94/12/19 09:32:22 by baud 
use messages from rtcopyerr.h

rtcopy/dktotpU.c: 2.20 94/11/25 09:48:38 by acher 
tpon changeable from tpio.c

rtcopy/rtcopy.h: 2.12 94/12/17 11:20:29 by baud 
include rtcopyerr.h

rtcopy/rtcopy.h: 2.11 94/11/21 11:21:45 by acher 
ETMUSR replaces TOOMNYUSRS

rtcopy/rtcopy.h: 2.10 94/10/12 18:20:43 by acher 
Special flag is added if Too many tape users on the targetted tape server.

rtcopy/rtcopy.shift: 2.53 94/12/19 15:14:31 by acher 
-s a::b syntax now accepted.

rtcopy/rtcopy.shift: 2.52 94/12/08 17:17:17 by acher 
in case of transfer limited by -s , also return 197 at the end of request.

rtcopy/rtcopy.shift: 2.51 94/12/06 18:46:16 by acher 
if TPE_LSZ or BLKSKPD code sent , don't exit in case of multiple files requested.

rtcopy/rtcopy.shift: 2.50 94/11/25 17:16:07 by acher 
When appending starts, don't send stageupdc until all tape files have come.

rtcopy/rtcopy.shift: 2.49 94/11/25 09:36:34 by acher 
stageupdc not sent after tpmnt + correction in case 2 requests for same tape appear simultaneously with notms.

rtcopy/rtcopy.shift: 2.48 94/11/23 09:16:08 by acher 
Debugging statement eliminated.

rtcopy/rtcopy.shift: 2.47 94/11/22 18:45:46 by acher 
in some cases, variables such as oldrecfm or stoptime were not set.

rtcopy/rtcopy.shift: 2.46 94/11/21 15:56:07 by acher 
in some cases , stoptime wasn't instanciated.

rtcopy/rtcopy.shift: 2.45 94/11/21 15:06:30 by acher 
stoptime affectation was not done if DONOTRETRY = TRUE in some cases.

rtcopy/rtcopy.shift: 2.44 94/11/21 11:17:09 by acher 
ETMUSR replaces TOOMNYUSRS ( ETMUSR from ../tape/tape.h also in rtcopy.h )

rtcopy/rtcopy.shift: 2.43 94/10/12 19:01:02 by acher 
return status was corrupted in the second elif statement.

rtcopy/rtcopy.shift: 2.42 94/10/12 18:25:28 by acher 
Send code TOOMNYUSRS (192) if too many tape users. It will trigger a retry in most up to date versions of tpread and a failure in old versions with exit code TOOMNYUSRS.

rtcopy/rtcopyd.c: 2.48 94/12/19 16:18:03 by acher 
On DEC OSF1, getpid() to get job ID, not setpgrp() which does not run if daemon started by INETD.

rtcopy/rtcopyd.c: 2.47 94/12/19 09:39:06 by baud 
increase command buffer to 2048 bytes

rtcopy/rtcopyd.c: 2.46 94/12/15 20:24:15 by acher 
When a machine is targetting a host for device X and device X is not appearing in tprstat , rtcopyd was sending wrong capacity values.

rtcopy/rtcopyd.c: 2.45 94/11/21 11:24:00 by acher 
ETMUSR replaces TOOMNYUSRS.

rtcopy/rtcopyd.c: 2.44 94/10/12 18:22:00 by acher 
Too many tape users on the tape server.

NEW file: rtcopy/rtcopyerr.h(1.1)
rtcopy/rtcopyerr.h: 1.1 94/12/17 11:21:15 by baud 
date and time created 94/12/17 11:21:15 by baud

rtcopy/tpio.c: 1.24 94/12/17 11:14:48 by baud 
use messages from rtcopyerr.h, do not call trerror if checkeofeov fails

rtcopy/tpio.c: 1.23 94/11/25 09:50:07 by acher 
tpon set to 0 in case tape file is closed.

rtcopy/tpio.c: 1.22 94/10/21 19:29:56 by acher 
increment block number counter if steping over an error on tape.

rtcopy/tpread.c: 2.48 94/12/19 09:42:02 by baud 
increase command buffer to 2048 bytes

rtcopy/tpread.c: 2.47 94/11/21 11:18:41 by acher 
ETMUSR replaces TOOMNYUSRS  + check of -F option value removed.

rtcopy/tpread.c: 2.46 94/10/13 12:32:40 by acher 
Sleep a while before resubmitting request when "too many tape users".

rtcopy/tpread.c: 2.45 94/10/12 18:18:24 by acher 
Added automatic infinite retry if too many users are queued on the tape server.

rtcopy/tpread.man: 1.12 94/11/21 11:26:25 by acher 
205 is the value of ETMUSR

rtcopy/tpread.man: 1.11 94/10/12 19:08:58 by acher 
Added exit code 192.

rtcopy/tptodkF.c: 2.23 94/12/17 11:16:51 by baud 
use messages from rtcopyerr.h

rtcopy/tptodkF.c: 2.22 94/11/25 09:37:59 by acher 
tpon changeable from tpio.c

rtcopy/tptodkU.c: 2.20 94/12/19 09:36:40 by baud 
use messages from rtcopyerr.h

rtcopy/tptodkU.c: 2.19 94/11/25 09:39:03 by acher 
tpon changeable from tpio.c

sysreq/Imakefile: 1.5 94/10/14 14:41:07 by baud 
SYSREQ default host is now defined in config/site.def

sysreq/config.h: 1.3 94/10/14 14:29:56 by baud 
SYSREQ default host is now defined in config/site.def

sysreq/netreq.c: 1.19 94/11/17 14:34:50 by hemmer 
comtxtl is an int now.

sysreq/netreq.c: 1.18 94/10/14 14:39:46 by baud 
SYSREQ default host is now defined in config/site.def

sysreq/sysreq.man: 1.2 94/10/14 15:07:24 by baud 
replace /etc/sysreqrc by /etc/shift.conf and document exit codes

sysreq/sysreqf.c: 1.19 94/11/17 15:42:31 by hemmer 
Invalid loop bounds while copy back to user buffer

config/site.def: 1.12 94/10/17 13:15:17 by acher 
FollowRtLinks flag added.

config/site.def: 1.11 94/10/14 14:37:50 by baud 
SYSREQ default host is now defined in config/site.def

stage/Imakefile: 1.3 94/12/18 10:02:12 by baud 
add stageinit and stagecat, link to buildupath instead of resolveln

NEW file: stage/buildupath.c(1.1)
stage/buildupath.c: 1.1 94/12/17 21:15:36 by baud 
date and time created 94/12/17 21:15:36 by baud

stage/packfseq.c: 1.3 94/12/17 21:18:02 by baud 
dynamically allocate space for fseq list

stage/poolmgr.c: 1.7 94/12/17 21:25:26 by baud 
add code for stageinit, save cleaner starting time

stage/send2stgd.c: 1.9 94/12/18 09:40:52 by baud 
give non zero exitcode if unlink or symlink fail

stage/stage.h: 1.8 94/12/18 09:58:42 by baud 
increase command buffer to 2048, add stageinit and stagecat commands

stage/stageclr.c: 1.6 94/12/17 21:11:47 by baud 
add option -L to remove link without removing data file

stage/stageclr.man: 1.2 94/12/19 10:39:16 by baud 
add option -L

stage/stagein.c: 1.12 94/12/18 09:46:26 by baud 
use external routine buildupath, return code 192 if aborted by stageclr, support density 38K, add entry point stagecat, make linknames optional for stagein

stage/stagein.man: 1.8 94/12/19 11:48:53 by baud 
more precise decription of the commands; add command stagecat; add stageing of disk files

stage/stagein.man: 1.7 94/12/19 10:55:32 by baud 
add code 192 and multiple values for option -s

stage/stagein.man: 1.6 94/10/05 14:04:59 by baud 
correct typo error

NEW file: stage/stageinit.c(1.1)
stage/stageinit.c: 1.1 94/12/17 21:13:00 by baud 
date and time created 94/12/17 21:13:00 by baud

stage/stageput.c: 1.3 94/12/17 21:32:52 by baud 
use external routine buildupath, return code 192 if aborted by stageclr

stage/stageput.man: 1.2 94/12/19 10:57:12 by baud 
add exit codes 192 and 197

stage/stageqry.c: 1.4 94/12/17 21:08:49 by baud 
add option -S

stage/stageqry.man: 1.5 94/12/19 10:41:43 by baud 
change meaning of option -P, add option -S

stage/stager.c: 1.7 94/12/17 21:29:03 by baud 
allocate space dynamically for fid and fseq lists, exit with REQKILD instead of USERR if request aborted by user

stage/stageupdc.c: 1.4 94/12/17 21:21:43 by baud 
add option -U and optional pathname to mark a stageout as complete

stage/stgdaemon.c: 1.19 94/12/19 14:30:13 by baud 
call setsid instead of setpgrp for alpha-osf

stage/stgdaemon.c: 1.18 94/12/19 10:23:37 by baud 
add commands stageinit and stagecat, correct space management.....

DELETED file : tape/3495subr.c (1.5)
DELETED file : stage/resolveln.c (1.2)

************************ VERSION 1.7.4.1 *****************************
tape/cvtden.c: 1.4 94/09/22 16:31:18 by baud 
add densities for DLT support

tape/dmpfil.c: 1.18 94/09/22 16:56:22 by baud 
add DLT densities in routine 'usage'

tape/dmpfil.c: 1.17 94/09/22 16:33:37 by baud 
add densities for DLT support

tape/tape.h: 1.39 94/09/22 16:29:34 by baud 
add densities for DLT support

tape/tperror.c: 1.3 94/09/26 10:12:59 by baud 
add 'pseudo' sense keys for SUN

tape/tperror.c: 1.2 94/09/23 13:28:57 by baud 
display 'no sense key' instead of 'no sense data' for AIX SCSI driver

rfio/open.c: 3.13 94/09/26 09:38:12 by hemmer 
Cosmetic change in error reporting

rfio/rfio_calls.c: 3.26 94/10/03 11:17:35 by acher 
For OSF1 (DEC) popen() uses internally signal SIGCHLD.

rfio/rfio_calls.c: 3.25 94/10/03 11:05:09 by toto 
setgid & setuid can change id to any id, even not having a passwd entry. Check if uid and gid sent correspond to a local account.

rfio/rfio_calls.c: 3.24 94/09/25 11:52:17 by acher 
If user sends error code below 0, rfiod process core dumps.

rtcopy/rtcopy.h: 2.9 94/09/30 12:40:56 by acher 
MAXLINELEN defined.

rtcopy/rtcopy.shift: 2.41 94/09/30 12:32:23 by acher 
Interface to the stager corrected in case of concatenation into a disk file.

rtcopy/rtcopyd.c: 2.43 94/09/30 12:39:28 by acher 
command buffer increased to BUFSIZ, program exits if request longer than BUFSIZ, and command line in log split in chunks of MAXLINELEN with \ ending charcacter.

rtcopy/tptodkU.c: 2.18 94/09/15 08:55:03 by baud 
rounds up buflen to page multiple only for CRAY. New PCTA driver does not process correctly buflen >= 65536

sysreq/netreq.c: 1.17 94/09/22 16:24:50 by hemmer 
Could core dump if EBUF2SMALL, because writing outside buffer.

dpm/dpm/dpm.man: 3.4 94/09/29 09:57:44 by acher 
dpm commands's arguments are specified with initials , not full words, except the -link option.

stage/send2stgd.c: 1.8 94/09/26 14:00:02 by baud 
suppress error message if unlink fails with ENOENT

stage/stagein.c: 1.11 94/09/30 08:50:52 by baud 
check directory writable only if -p NOPOOL is specified

stage/stagein.c: 1.10 94/09/20 16:12:31 by baud 
remove declaration for unused routine getarg

************************ VERSION 1.7.4.0 *****************************
h/rfio.h: 3.21 94/09/14 17:50:13 by simmins 
Added rename() and lockf()

h/serrno.h: 1.15 94/09/14 17:50:14 by simmins 
Added rename() and lockf()

rfio/Imakefile: 1.20 94/09/14 17:51:07 by simmins 
Added rename() and lockf()

NEW file: rfio/lockf.c(1.1)
rfio/lockf.c: 1.1 94/09/14 17:51:43 by simmins 
date and time created 94/09/14 17:51:43 by simmins

NEW file: rfio/rename.c(1.1)
rfio/rename.c: 1.1 94/09/14 17:51:42 by simmins 
date and time created 94/09/14 17:51:42 by simmins

rfio/rfio_calls.c: 3.23 94/09/14 17:51:08 by simmins 
Added rename() and lockf()

rfio/rfio_serv.c: 3.30 94/09/14 17:51:09 by simmins 
Added rename() and lockf()

stage/stgdaemon.man: 1.5 94/09/06 11:35:56 by baud 
document sysreq and rfio entries needed in /etc/services

************************ VERSION 1.7.3.4 *****************************
tape/mounttape.c: 1.46 94/08/31 10:27:15 by baud 
correct tapeacct calls for tape mounted and tape positionned

rtcopy/tpread.man: 1.10 94/08/30 13:48:22 by baud 
add documentation for return code 197

stage/packfseq.c: 1.2 94/09/01 10:47:46 by baud 
correct for trailing dash in file sequence number

stage/stage.h: 1.7 94/09/01 10:46:22 by baud 
increase MAXFIL to 40 and PRTBUFSZ to 2048

stage/stager.c: 1.6 94/09/01 10:49:23 by baud 
correct for trailing dash in file sequence number and -q ux

stage/stgdaemon.c: 1.17 94/09/01 10:51:54 by baud 
correct for trailing dash in file sequence number

************************ VERSION 1.7.3.3 *****************************
common/wsacct.c: 1.2 94/08/24 15:36:44 by baud 
add cast to malloc call to avoid warning at compilation time

tape/tapeacct.c: 1.3 94/08/24 15:55:00 by baud 
add include stdio.h to define NULL

rtcopy/tpread.c: 2.44 94/08/26 16:22:17 by acher 
successufulou is not successful... Corrected problem preventing call to TMS in case where -F unspecified.

stage/send2stgd.c: 1.7 94/08/29 11:43:53 by baud 
stager hostname may also be specified thru environment variable STAGE_HOST

stage/stage.h: 1.6 94/08/29 11:38:24 by baud 
add message STG38 - stage request too long

stage/stagein.c: 1.9 94/08/29 12:15:32 by baud 
check that the stage request does not exceed sendbuf length

stage/stgdaemon.man: 1.4 94/08/29 11:30:06 by baud 
stager hostname may also be specified thru environment variable STAGE_HOST

************************ VERSION 1.7.3.2 *****************************
rtcopy/dktotpF.c: 2.18 94/08/18 15:01:49 by acher 
TRACE interaction with other macro definition.

rtcopy/rtcopyd.c: 2.42 94/08/18 14:59:43 by acher 
Debugging message omitted into rtcopyd.log.

rtcopy/rtcopyd.man: 1.5 94/08/18 14:39:21 by acher 
Added procedures for retries on tape failures.

rtcopy/tpio.c: 1.21 94/08/19 14:25:03 by acher 
ERROR 210 READING TAPE is now: "INCORRECT OR MISSING TRAILER LABEL ON TAPE" + Userr error error code returned.

rtcopy/tpio.c: 1.20 94/08/18 15:08:41 by acher 
BLOCK instead of RECORD

rtcopy/tptodkF.c: 2.21 94/08/18 15:04:52 by acher 
BLOCK skipped ( not RECORD ).

rtcopy/tptodkF.c: 2.20 94/08/18 15:02:47 by acher 
TRACE interaction with other macro definition.

stage/send2stgd.c: 1.6 94/08/19 07:50:30 by baud 
missing include <sys/stat.h>

stage/stgdaemon.c: 1.16 94/08/19 17:39:13 by baud 
correct problem of stagewrt for multiple files (daemon crash on sgi)

************************ VERSION 1.7.3.1 *****************************
tape/mounttape.c: 1.45 94/08/17 14:38:09 by baud 
correct spelling mistake in SACCT variable

tape/tapeacct.c: 1.2 94/08/17 14:40:56 by baud 
correct remount reason processing

tape/unloadtps.c: 1.15 94/08/17 14:53:52 by baud 
add missing include sacct.h

tape/unloadtps.c: 1.14 94/08/17 14:38:29 by baud 
correct spelling mistake in SACCT variable

rtcopy/rtcopy.h: 2.8 94/08/17 11:44:58 by acher 
Definition of BLKSKPD, TPE_LSZ, and MNYPARY.

rtcopy/tpio.c: 1.19 94/08/17 17:45:10 by acher 
Skip BLOCK not record

stage/send2stgd.c: 1.5 94/08/18 10:28:36 by baud 
allow root to remove symbolic links in NFS mounted filesystems

stage/stage.h: 1.5 94/08/17 15:22:11 by baud 
add msg STG93 "removing link"

stage/stagein.c: 1.8 94/08/18 08:40:06 by baud 
don't retry if rc is BLKSKPD, TPE_LSZ, MNYPARI or LIMBYSZ

stage/stagein.man: 1.5 94/08/18 08:46:55 by baud 
document codes BLKSKPD, TPE_LSZ, MNYPARI and LIMBYSZ

stage/stgdaemon.c: 1.15 94/08/18 10:32:50 by baud 
correct processing of stageqry -P (destroyed by feature stageqry -q)

stage/stgdaemon.c: 1.14 94/08/17 15:27:29 by baud 
add msg STG93 "removing link"

************************ VERSION 1.7.3.0 *****************************
common/Imakefile: 1.8 94/08/16 15:32:45 by baud 
add accounting routine wsacct

common/log.c: 1.22 94/07/27 10:53:16 by hemmer 
apollo support

common/serror.c: 1.23 94/07/29 07:18:45 by hemmer 
Allow TGV as an alias for MULTINET (CERNLIB requirement)

common/socket.c: 1.19 94/07/29 07:18:48 by hemmer 
Allow TGV as an alias for MULTINET (CERNLIB requirement)

common/socket.c: 1.18 94/07/28 11:07:10 by hemmer 
s_ioctl for solaris already used by libsocket.a.

NEW file: common/wsacct.c(1.1)
common/wsacct.c: 1.1 94/08/16 15:29:41 by baud 
date and time created 94/08/16 15:29:41 by baud

h/log.h: 1.5 94/07/29 07:12:05 by hemmer 
Workaround for VAX/VMS-VAXC function pointer bug with libraries

h/net.h: 1.3 94/07/29 10:18:01 by hemmer 
Allow TGV as an alias for MULTINET (CERNLIB requirement)

h/net.h: 1.2 94/07/29 07:12:08 by hemmer 
Workaround for VAX/VMS-VAXC function pointer bug with libraries

h/rfio.h: 3.20 94/08/15 12:14:29 by acher 
 length "20" replaced by RESHOSTNAMELEN ("hostname restricted in length").

h/rfio.h: 3.19 94/08/05 17:41:00 by hemmer 
host now used, mainly for error reporting.

NEW file: h/sacct.h(1.1)
h/sacct.h: 1.1 94/08/16 15:37:13 by baud 
date and time created 94/08/16 15:37:13 by baud

tape/Imakefile: 1.15 94/08/16 15:16:12 by baud 
add accounting

tape/Imakefile: 1.14 94/08/08 16:30:46 by baud 
dumptape is now called tpdump on a tape server; a link to dumptape is created if rtcopy client is not build

tape/buildhdrlbl.c: 1.6 94/08/04 14:34:21 by baud 
add support for blocking attribute in hdr2 of sl tapes

tape/dmpfil.c: 1.16 94/08/04 13:34:52 by baud 
display also the blocking attribute

tape/dumptape.sh: 1.6 94/08/08 15:59:29 by baud 
ODMDIR must be set in the environment to get the driver name on AIX; BIN must be used as path for reserv, tpmnt, dmpfil and rls

tape/getlabelinfo.c: 1.3 94/08/04 14:22:08 by baud 
add support for blocking attribute in hdr2 of sl tapes

tape/mounttape.c: 1.44 94/08/16 15:23:02 by baud 
add dgn and prevvid to parameter list and call tapeacct

tape/mounttape.c: 1.43 94/08/09 12:18:22 by baud 
after "reselect failed", a robot mount must be reissued

tape/mounttape.c: 1.42 94/08/04 14:32:14 by baud 
recfm field is now 4 characters long (instead of 1); add support for blocking attribute in hdr2 of sl tapes

tape/tape.h: 1.38 94/08/04 14:12:32 by baud 
enlarge recfm field to 4 characters (was 1 before)

NEW file: tape/tapeacct.c(1.1)
tape/tapeacct.c: 1.1 94/08/16 15:16:44 by baud 
date and time created 94/08/16 15:16:44 by baud

tape/tpdaemon.c: 1.55 94/08/16 15:26:59 by baud 
add dgn to mounttape/unloadtps parameter list and call tapeacct

tape/tpdaemon.c: 1.54 94/08/04 14:27:06 by baud 
recfm field is now 4 characters long (instead of 1)

tape/tplblinfo.c: 1.3 94/08/16 08:14:05 by baud 
initialization of path variable was missing

tape/tplblinfo.c: 1.2 94/08/04 14:18:16 by baud 
enlarge recfm field to 4 characters (was 1 before)

tape/tpmnt.c: 1.23 94/08/04 14:15:05 by baud 
add FB as possible value for -F option

tape/tpmnt.man: 1.12 94/08/04 15:57:23 by baud 
add FB to the list of valid values for -F option

tape/unloadtps.c: 1.13 94/08/16 15:19:09 by baud 
add dgn to parameter list and call tapeacct

rfio/Imakefile: 1.19 94/07/26 09:58:08 by acher 
Added DOMAINNAME into CFLAGS.

rfio/fopen.c: 3.2 94/07/22 11:11:53 by acher 
In local mode, open the file name without the machine name appended.

rfio/logging.c: 1.6 94/08/03 07:28:12 by hemmer 
cosmetic: syslog messages consistency

rfio/lseek.c: 3.5 94/08/15 20:53:12 by acher 
lseek() should check that cached data is inside the cache.

rfio/open.c: 3.12 94/08/15 12:11:11 by acher 
 field host in RFILE has length : RESHOSTNAMELEN. setsockopt()  in read for RCVBUF.

rfio/open.c: 3.11 94/08/08 15:40:31 by hemmer 
host now used, mainly for error reporting.

rfio/open.c: 3.10 94/08/03 07:28:08 by hemmer 
cosmetic: syslog messages consistency

rfio/read.c: 3.10 94/08/15 15:51:11 by acher 
cosmetic: Changing keyword name for RCVBUF size.

rfio/read.c: 3.9 94/08/15 12:09:22 by acher 
setsockopt() made at read time, and value can be set depending of the net. interface.

rfio/readlink.c: 1.2 94/07/28 12:22:38 by baud 
When readlink succeeds, return the length of the string .

rfio/rfcp.c: 1.5 94/07/21 10:33:14 by acher 
Modified open of target file with O_TRUNC flag.

rfio/rfio_calls.c: 3.22 94/08/03 07:28:09 by hemmer 
cosmetic: syslog messages consistency

rfio/rfio_calls.c: 3.21 94/07/26 09:56:16 by acher 
 DOMAINNAME introduced to avoid repetition of hosts with fully qualified hostnames in configuration file /etc/shift.conf.

rfio/rfio_fcalls.c: 3.13 94/08/03 07:28:11 by hemmer 
cosmetic: syslog messages consistency

rfio/xyopen.c: 3.16 94/08/15 14:40:14 by acher 
Reflect changes in RFILE.host.

rtcopy/Imakefile: 1.12 94/08/15 12:28:35 by acher 
tpsinfod link rule missing.

rtcopy/dktotpF.c: 2.17 94/08/12 20:07:43 by acher 
Set up flag to enable READAHEAD is Fixed mode.

rtcopy/dktotpF.c: 2.16 94/08/03 17:42:16 by acher 
Stored common definitions into a header file rtcopy.h

rtcopy/dktotpF.c: 2.15 94/08/02 10:55:05 by acher 
set up serrno to 0 before use rfio calls.

rtcopy/dktotpU.c: 2.19 94/08/03 17:40:44 by acher 
Stored common definitions into a header file rtcopy.h

rtcopy/rtcopy.h: 2.7 94/08/03 17:13:19 by acher 
Common constants for retry options added for common packages.

rtcopy/rtcopy.shift: 2.40 94/08/11 18:00:06 by acher 
stageupdc should be given a proper -R option as it is used for the stager retries policy.

rtcopy/rtcopy.shift: 2.39 94/08/04 13:40:31 by baud 
correct processing of -F FB

rtcopy/rtcopy.shift: 2.38 94/08/03 17:11:38 by acher 
Option -F FB added. option -E added to skip on tape error.

rtcopy/rtcopy.shift: 2.37 94/08/02 10:50:26 by baud 
add option -E to getopt list

rtcopy/rtcopy.shift: 2.36 94/07/27 10:51:53 by acher 
Added -E option for further use.

rtcopy/rtcopyd.c: 2.41 94/08/11 17:04:15 by acher 
Commands partially successful implemented for log file. Bug on return code from wait corrected to get ret. code higher than 128 (decimal).

rtcopy/rtyexit.c: 1.3 94/08/03 17:39:33 by acher 
Stored common definitions into a header file rtcopy.h

rtcopy/tpio.c: 1.18 94/08/11 16:59:15 by acher 
When other error but ETPARIT, do not authorize skip on tape , because it is unrecoverable.

rtcopy/tpio.c: 1.17 94/08/05 19:46:15 by acher 
BLOCK is skipped , not RECORD.

rtcopy/tpio.c: 1.16 94/08/04 22:16:48 by acher 
Added ETUNREC in list of errors.

rtcopy/tpio.c: 1.15 94/08/03 17:43:21 by acher 
Error message modified when block is too small or too large.

rtcopy/tpio.c: 1.14 94/08/03 17:10:02 by acher 
Added skip on tape error , and behaviour on retries modified in function of error .

rtcopy/tpread.c: 2.43 94/08/11 17:01:15 by acher 
Implemented status of "command partially successuful" when a tape error occured and was skipped over.

rtcopy/tpread.c: 2.42 94/08/04 13:38:05 by baud 
add FB as possible value for -F option

rtcopy/tpread.c: 2.41 94/07/27 10:47:32 by acher 
Added E option ( behaviour on tape error ).

rtcopy/tpread.man: 1.9 94/08/11 18:41:20 by acher 
 Added new return codes.

rtcopy/tpread.man: 1.8 94/08/05 14:13:28 by acher 
Syntaxic error corrected.

rtcopy/tpread.man: 1.7 94/08/05 11:29:23 by acher 
Added comments on -E option and -F FB.

rtcopy/tptodkF.c: 2.19 94/08/11 18:02:18 by acher 
modification of return codes. Refer to new tpread/tpwrite man page.

rtcopy/tptodkF.c: 2.18 94/08/03 17:33:16 by acher 
Added option -E to skip on tape error + modified option -s to read first record length when -L unspecified.

rtcopy/tptodkF.c: 2.17 94/08/02 10:53:49 by acher 
set up serrno to 0 before use rfio calls.

rtcopy/tptodkU.c: 2.17 94/08/11 18:03:29 by acher 
modification of return codes. Refer to new tpread/tpwrite man page.

rtcopy/tptodkU.c: 2.16 94/08/03 17:36:32 by acher 
Enabled option -E to skip on tape error.

NEW file: sysreq/README.UNIX(1.1)
sysreq/README.UNIX: 1.1 94/07/14 15:06:10 by hemmer 
date and time created 94/07/14 15:06:10 by hemmer

NEW file: sysreq/make_aix(1.1)
sysreq/make_aix: 1.1 94/07/15 09:14:57 by hemmer 
date and time created 94/07/15 09:14:57 by hemmer

sysreq/make_cernlib.com: 1.3 94/07/29 10:28:49 by hemmer 
Also create a Fortran example thru libraries

sysreq/make_cernlib.com: 1.2 94/07/29 08:10:42 by hemmer 
CERNLIB uses TGV because of PATCHY limits on command line

NEW file: sysreq/make_hpux(1.1)
sysreq/make_hpux: 1.1 94/07/15 09:14:58 by hemmer 
date and time created 94/07/15 09:14:58 by hemmer

NEW file: sysreq/make_irix4(1.1)
sysreq/make_irix4: 1.1 94/07/15 09:14:58 by hemmer 
date and time created 94/07/15 09:14:58 by hemmer

NEW file: sysreq/make_irix5(1.1)
sysreq/make_irix5: 1.1 94/07/15 09:14:59 by hemmer 
date and time created 94/07/15 09:14:59 by hemmer

NEW file: sysreq/make_osf1(1.1)
sysreq/make_osf1: 1.1 94/07/15 09:14:59 by hemmer 
date and time created 94/07/15 09:14:59 by hemmer

NEW file: sysreq/make_solaris(1.1)
sysreq/make_solaris: 1.1 94/07/15 09:15:00 by hemmer 
date and time created 94/07/15 09:15:00 by hemmer

NEW file: sysreq/make_sunos(1.1)
sysreq/make_sunos: 1.1 94/07/15 09:15:01 by hemmer 
date and time created 94/07/15 09:15:01 by hemmer

NEW file: sysreq/make_ultrix(1.1)
sysreq/make_ultrix: 1.1 94/07/15 09:15:01 by hemmer 
date and time created 94/07/15 09:15:01 by hemmer

sysreq/netreq.c: 1.16 94/07/29 07:18:10 by hemmer 
Allow TGV as an alias for MULTINET (CERNLIB requirement)

sysreq/sysreqc.c: 1.9 94/07/14 12:17:15 by hemmer 
AIX on IBMR2 support (thru -qextname for Fortran)

sysreq/sysreqf.c: 1.18 94/07/14 12:17:16 by hemmer 
AIX on IBMR2 support (thru -qextname for Fortran)

dpm/dpm/Imakefile: 1.7 94/07/26 18:40:36 by acher 
if DpmUsesRfio is YES, link with shift lib.

dpm/dpm/disk.c: 3.10 94/07/26 17:22:48 by acher 
Calling RFIO in order to provide solution when no NFS mount is possible.

dpm/dpm/sfgc.c: 1.44 94/07/22 09:06:33 by acher 
statement more readable.

dpm/dpm/sfgc.man: 1.6 94/07/22 09:32:33 by acher 
Mistake in the sfgc manual: default ref time is the modification time.

dpm/dpm/sfsh.c: 3.8 94/07/26 17:15:53 by acher 
Added RFIO calls if NFS mounts are prohibited.

NEW file: dpm/dpm/system.c(1.1)
dpm/dpm/system.c: 1.1 94/07/26 17:18:19 by acher 
date and time created 94/07/26 17:18:19 by acher

config/Imake.tmpl: 1.3 94/08/12 17:36:57 by baud 
defines ACCTFLAG

config/site.def: 1.10 94/08/12 17:31:27 by baud 
add shift accounting information

stage/poolmgr.c: 1.6 94/08/16 16:26:33 by baud 
check rfio_statfs rc; allow for negative numbers in cvtdbl2str()

stage/poolmgr.c: 1.5 94/08/09 11:04:24 by baud 
resize capacity_s and free_s to 9 bytes because of 999<size<1023; protect updfreespace against filesystem not part of a pool anymore

stage/stage.h: 1.4 94/08/16 16:03:52 by baud 
add -E option for stagein; add also msg STG37

stage/stagein.c: 1.7 94/08/04 15:18:34 by baud 
add option -E to specify the action in case of tape parity error

stage/stagein.man: 1.4 94/08/05 14:03:15 by baud 
add option -E and record format FB

stage/stageqry.c: 1.3 94/08/04 15:21:54 by baud 
add option -q to specify file sequence number(s)

stage/stageqry.man: 1.4 94/08/05 11:01:41 by baud 
add option -q and record format FB

stage/stager.c: 1.5 94/08/16 16:20:33 by baud 
add -E option for stagein and provide support for tpread rc > 127

stage/stgdaemon.c: 1.13 94/08/16 17:16:42 by baud 
correct problems with STAGEOUT; add option -E for stagein; add option -q for stageqry; support exit codes > 127

DELETED file : sysreq/make_unix (1.2)
************************ VERSION 1.7.2.7 *****************************
common/socket.c: 1.17 94/07/13 17:53:17 by hemmer 
change TGV to MULTINET

************************ VERSION 1.7.2.6 *****************************
common/getacct.c: 1.7 94/07/13 13:23:59 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

common/getconfent.c: 1.10 94/07/13 13:23:58 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

common/log.c: 1.21 94/07/13 13:24:00 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

common/serror.c: 1.22 94/07/13 13:24:01 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

common/trace.c: 1.5 94/07/13 13:24:02 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

NEW file: sysreq/make_cernlib.com(1.1)
sysreq/make_cernlib.com: 1.1 94/07/13 13:06:10 by hemmer 
date and time created 94/07/13 13:06:10 by hemmer

sysreq/netreq.c: 1.15 94/07/13 12:46:07 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

sysreq/sysreq.c: 1.10 94/07/13 12:46:08 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

sysreq/sysreqc.c: 1.8 94/07/13 12:46:09 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

sysreq/sysreqf.c: 1.17 94/07/13 12:46:10 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

sysreq/xdr.c: 1.16 94/07/13 12:46:12 by hemmer 
COMPILE_NOPREFIX must be restricted to VMS on ALPHA

************************ VERSION 1.7.2.5 *****************************
rtcopy/rtcopy.shift: 2.35 94/07/12 11:41:25 by acher 
If stagedaemon does not respond, abort.

************************ VERSION 1.7.2.4 *****************************
common/serror.c: 1.21 94/07/08 12:12:26 by hemmer 
delete unneeded #KERNEL defs, confusing some Ultrxies

************************ VERSION 1.7.2.3 *****************************
common/serror.c: 1.20 94/07/06 13:25:49 by hemmer 
Document VMS compiler bug detection code

common/serror.c: 1.19 94/07/05 11:58:08 by hemmer 
Fix for VAX/VMS (therefore VAX C)

rtcopy/Imakefile: 1.11 94/06/30 11:31:37 by root 
tpread, tpwrite and tpselect should not be installed if BuildRtcopyClient == NO

rtcopy/rtcopy.shift: 2.34 94/07/01 14:55:36 by baud 
ODMDIR must be set in the environment to get the driver name on AIX

stage/poolmgr.c: 1.4 94/07/01 13:25:47 by baud 
add missing % in a sprintf (print_pool_utilization)

stage/stgdaemon.c: 1.12 94/07/01 13:40:33 by baud 
should rebuild ipath for -q u and not -q n, otherwise stagewrt fails

************************ VERSION 1.7.2 *****************************
common/getacct.c: 1.6 94/06/28 07:47:40 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

common/getacct.c: 1.5 94/06/08 06:39:00 by hemmer 
Add support for VMS DEC C compiler

common/getconfent.c: 1.9 94/06/28 08:03:25 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

common/getconfent.c: 1.8 94/06/08 06:34:11 by hemmer 
DEBUG mode now uses log(); VMS support for config.

common/log.c: 1.20 94/06/28 07:43:19 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

common/log.c: 1.19 94/06/27 11:33:20 by hemmer 
Solaris, Irix5, vms, VM compatibility (stdarg vs. vararg).

common/log.c: 1.18 94/06/23 18:08:50 by acher 
 getenv () should be declared for SOLARIS also.

common/log.c: 1.17 94/06/22 19:03:54 by acher 
getenv() should be declared extern for DEC ALPHA/OSF1 machines.

common/log.c: 1.16 94/06/10 10:35:13 by hemmer 
Added VMS, VM support

common/serror.c: 1.18 94/06/28 08:03:26 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

common/serror.c: 1.17 94/06/10 06:42:57 by hemmer 
Add UCX/MULTINET/TCPWARE support

common/socket.c: 1.16 94/06/10 07:48:01 by hemmer 
Added VMS (MULTINET and UCX) support

common/trace.c: 1.4 94/06/28 08:03:27 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

common/trace.c: 1.3 94/06/08 07:10:11 by hemmer 
Added VMS support (DEC C compiler)

examples/Imakefile: 1.7 94/06/22 07:04:37 by hemmer 
fort77 requires +U77 for getarg() at load time.

examples/Imakefile: 1.6 94/06/06 18:20:57 by acher 
rfcp moved to ../rfio.

h/log.h: 1.4 94/06/08 06:42:58 by hemmer 
Added VMS & VM support

NEW file: h/net.h(1.1)
h/net.h: 1.1 94/06/08 06:46:50 by hemmer 
date and time created 94/06/08 06:46:50 by hemmer

h/patchlevel.h: 1.5 94/06/21 15:05:45 by hemmer 
change header

tape/Imakefile: 1.13 94/06/29 16:32:05 by baud 
add dependency of readlbl.o usrreadlbl.o on taperr.h

tape/Imakefile: 1.12 94/06/29 16:15:23 by baud 
add dependency of tperror.o on taperr.h

tape/Imakefile: 1.11 94/06/22 08:24:07 by baud 
add missing rule for tplblinfo.man

tape/Imakefile: 1.10 94/06/20 16:46:58 by baud 
add getlabelinfo.c, tplblinfo.c tplblinfo.man

tape/asc2ebc.c: 1.2 94/06/28 11:17:28 by baud 
labels may contain nulls (system code in hdr1)

tape/ebc2asc.c: 1.2 94/06/28 11:18:34 by baud 
labels may contain nulls (system code in hdr1)

NEW file: tape/getlabelinfo.c(1.2)
tape/getlabelinfo.c: 1.2 94/06/28 11:20:18 by baud 
labels may contain nulls (system code in hdr1)

tape/mounttape.c: 1.41 94/06/20 14:55:19 by baud 
do not rebuild hdr1 if ring out or append to existing file

tape/tape.h: 1.37 94/06/27 09:56:39 by baud 
move certain error codes to new include file taperr.h

NEW file: tape/taperr.h(1.1)
tape/taperr.h: 1.1 94/06/27 09:57:02 by baud 
date and time created 94/06/27 09:57:02 by baud

NEW file: tape/tplblinfo.c(1.1)
tape/tplblinfo.c: 1.1 94/06/20 16:38:35 by baud 
date and time created 94/06/20 16:38:35 by baud

NEW file: tape/tplblinfo.man(1.2)
tape/tplblinfo.man: 1.2 94/06/29 11:49:29 by baud 
add examples

tape/usrlbl.c: 1.10 94/06/21 17:42:55 by baud 
add <sys/types.h> for all platforms because of tape.h

tape/usrlbl.c: 1.9 94/06/20 16:37:48 by baud 
remove getlabelinfo routine to put it into getlabelinfo.c

tape/usrlbl.man: 1.2 94/06/20 16:43:57 by baud 
add routine gethdrinfo

rfio/Imakefile: 1.18 94/06/23 10:51:09 by acher 
rfcp entry corrected.

rfio/Imakefile: 1.17 94/06/06 19:01:53 by acher 
Install rfcp.

rfio/Imakefile: 1.16 94/06/06 12:11:44 by acher 
 Added rfcp into Makefile.

rfio/error.c: 3.10 94/06/21 15:12:45 by hemmer 
print last host name in the last position

rfio/error.c: 3.9 94/06/20 14:05:21 by acher 
When rfio_errmsg () returns null pointer, do not print.

NEW file: rfio/rfcp.c(1.4)
rfio/rfcp.c: 1.4 94/06/23 10:49:09 by acher 
RDONLY should be used instead of 0 ( 0 not understood on hpux).

rtcopy/rtcopy.shift: 2.33 94/06/06 18:36:50 by acher 
newpath suggested by stager taken into account

rtcopy/rtcopy.shift: 2.32 94/06/06 11:54:14 by acher 
newpath collects stageupdc output.

rtcopy/tpio.c: 1.13 94/06/27 09:59:26 by baud 
add #include "../tape/taperr.h" to get list of error codes

rtcopy/tpread.c: 2.40 94/06/20 17:44:01 by acher 
tpselect 's output contains only selected tape server on stdout.

NEW file: scripts/DPMstagein(1.6)
scripts/DPMstagein: 1.6 92/02/07 12:02:02 by les 


NEW file: scripts/DPMstageout(1.8)
scripts/DPMstageout: 1.8 91/10/08 15:47:25 by les 
Ooops! Left out the @(#)HISTORY	1.18111/11/99 !

scripts/Imakefile: 1.5 94/06/21 18:17:52 by hemmer 
stage{in|out} are now obsoleted by the stager. Prefixed with DPM.

sysreq/README.VMS: 1.5 94/06/28 08:38:09 by hemmer 
document /NOPREFIX rules

sysreq/README.VMS: 1.4 94/06/10 08:02:41 by hemmer 
Update on UCX and TWG

NEW file: sysreq/make_multinet.com(1.4)
sysreq/make_multinet.com: 1.4 94/06/28 08:43:41 by hemmer 
No more references to TGV

NEW file: sysreq/make_ucx.com(1.1)
sysreq/make_ucx.com: 1.1 94/06/08 14:12:54 by hemmer 
date and time created 94/06/08 14:12:54 by hemmer

NEW file: sysreq/make_unix(1.2)
sysreq/make_unix: 1.2 94/06/10 07:32:25 by hemmer 
remove create symlink for clean target.

sysreq/netreq.c: 1.14 94/06/28 08:34:06 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX), changed TGV by MULTINET

sysreq/netreq.c: 1.13 94/06/10 07:30:25 by hemmer 
A free() was missing in case of error while receiving retcode.

sysreq/netreq.c: 1.12 94/06/08 07:24:36 by hemmer 
Added UCX support

sysreq/sysreq.c: 1.9 94/06/28 08:33:34 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

sysreq/sysreq.c: 1.8 94/06/08 08:10:06 by hemmer 
Avoid printing garbage in case of error.

sysreq/sysreqc.c: 1.7 94/06/28 08:33:35 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

sysreq/sysreqf.c: 1.16 94/06/28 08:33:36 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

sysreq/xdr.c: 1.15 94/06/28 08:33:37 by hemmer 
prefix library entries for VMS (DECC using /NOPREFIX)

sysreq/xdr.c: 1.14 94/06/08 09:29:42 by hemmer 
Remove VMS linker problem workaround, add net.h

dpm/util/sockutil.c: 3.7 94/06/24 18:46:14 by acher 
Can't set sin_addr to ANY host address.

dpm/util/sockutil.c: 3.6 94/06/24 16:41:21 by acher 
sin_addr field on OSF1 is by default 4.3 BSD, and has a restricted length.

dpm/dpm/Imakefile: 1.6 94/06/20 14:54:10 by acher 
Added installation of sfgc man page.

dpm/dpm/sfgc.c: 1.43 94/06/20 15:52:14 by acher 
system() handles SIGCHLD on AIX.

config/site.def: 1.9 94/06/21 15:07:41 by hemmer 
man pages now in /usr/local/man by default

config/site.def: 1.8 94/06/03 10:40:27 by baud 
the stager group has been defined as 'st'

stage/Imakefile: 1.2 94/06/03 13:41:12 by baud 
introduce cpdskdsk

stage/cleaner.c: 1.3 94/06/03 13:44:40 by baud 
put messages from stage_clean in stager log

NEW file: stage/cpdskdsk.sh(1.1)
stage/cpdskdsk.sh: 1.1 94/06/21 13:22:52 by baud 
date and time created 94/06/21 13:22:52 by baud

stage/resolveln.c: 1.2 94/06/06 16:18:46 by baud 
add declaration of getcwd

stage/stage.h: 1.3 94/06/20 13:47:59 by baud 
add requester name in message STG95

stage/stageclr.c: 1.5 94/06/06 15:54:47 by baud 
suppress declaration of getcwd (unused)

stage/stageclr.c: 1.4 94/06/03 14:45:39 by baud 
add -I parameter in usage function

stage/stageclr.c: 1.3 94/06/03 13:49:53 by baud 
add parameter -I

stage/stagein.c: 1.6 94/06/06 16:40:56 by baud 
check return code of getcwd

NEW file: stage/stageout.man(1.1)
stage/stageout.man: 1.1 94/06/03 15:41:06 by baud 
date and time created 94/06/03 15:41:06 by baud

stage/stageput.c: 1.2 94/06/06 16:44:12 by baud 
check return code of getcwd

stage/stageqry.c: 1.2 94/06/03 13:51:49 by baud 
add parameter -I

stage/stager.c: 1.4 94/06/20 08:37:53 by baud 
correct typo error (arg_lrecl should be arg_retentd in sprintf)

stage/stager.c: 1.3 94/06/03 16:36:06 by baud 
introduces code for disk file staging and corrects processing when density is not specified

stage/stageupdc.c: 1.3 94/06/20 13:51:00 by baud 
suppress message STG16 from stageupdc to put it in stgdaemon

stage/stageupdc.c: 1.2 94/06/06 17:34:55 by baud 
add options -b -F -f -L -q

NEW file: stage/stagewrt.man(1.1)
stage/stagewrt.man: 1.1 94/06/03 15:41:48 by baud 
date and time created 94/06/03 15:41:48 by baud

stage/stgdaemon.c: 1.11 94/06/21 13:44:28 by baud 
add support for disk file stageing, correct processing of stagein -q u, stageput, creates automatically group and user directories......

stage/stgdaemon.man: 1.3 94/06/23 15:09:26 by baud 
add documentation about DEFPOOL and TRUST

DELETED file : examples/rfcp.c (1.7)
DELETED file : scripts/stagein (1.6)
DELETED file : scripts/stageout (1.8)
DELETED file : sysreq/make_tgv.com (1.2)
************************ VERSION 1.7.1 *****************************
Now includes the stager.
Many bug fixes and improvements.
./Imakefile: 1.4 94/05/18 17:19:22 by baud 
add directory stage

common/Imakefile: 1.7 94/05/11 13:30:02 by acher 
-g replaces -O in production versions.

examples/Imakefile: 1.5 94/06/01 14:26:17 by acher 
Tools should be linked with ULTRA if available.

h/patchlevel.h: 1.4 94/06/02 12:17:26 by hemmer 
Now includes a generation time stamp

h/rfio.h: 3.18 94/05/16 19:51:34 by acher 
Added request number for CHOWN.

h/rfio.h: 3.17 94/05/06 10:09:44 by simmins 
Added mkdir()

h/rfio.h: 3.16 94/05/02 19:13:48 by acher 
RQST_READLINK constant added.

fhs/fhsdaemon.c: 1.13 94/05/18 13:56:12 by baud 
suppress extra parameter in calls to netread/netwrite

tape/3495subr.c: 1.5 94/05/17 08:03:52 by baud 
display an error string build from sense bytes/library manager completion code instead of an error number

tape/Imakefile: 1.9 94/05/17 07:46:28 by baud 
introduces routine tperror and defines NOMORETAPES for dumptape

tape/buildvollbl.c: 1.3 94/05/17 08:06:33 by baud 
set Label Standard Level field to 3 in VOL1 of al tapes

tape/cvtden.c: 1.3 94/05/16 07:41:52 by baud 
accepts density 86400 as equivalent to 8500

tape/dmpfil.c: 1.15 94/05/17 08:09:19 by baud 
calls gettperror to get an error string build from sense keys/bytes

tape/dumptape.sh: 1.5 94/05/18 11:20:36 by baud 
use variable NOMORETAPES and do not specify full path name for SHIFT tape commands

tape/getunitstat.c: 1.13 94/05/20 16:57:50 by baud 
TMS_VERSN is not defined anymore (it was zero)

tape/lddisplay.c: 1.6 94/05/17 08:14:36 by baud 
calls rpttperror to give a meaningful error msg build from sense keys/bytes

tape/mounttape.c: 1.40 94/05/17 08:18:46 by baud 
uses sys_errlist for open errors, detects if reselect to same unit and allows processing of tapes without hdr2

tape/posittape.c: 1.19 94/05/17 08:20:43 by baud 
allows processing of tapes without hdr2

tape/readlbl.c: 1.12 94/05/17 08:22:54 by baud 
calls gettperror to get an error string build from sense keys/bytes

tape/rwndtape.c: 1.7 94/05/17 08:24:39 by baud 
calls rpttperror to give a meaningful error msg build from sense keys/bytes

tape/skiptape.c: 1.7 94/05/17 08:26:06 by baud 
calls rpttperror to give a meaningful error msg build from sense keys/bytes

tape/tape.h: 1.36 94/05/19 11:12:41 by baud 
add message TP043 - configuration line too long

tape/tape.h: 1.35 94/05/17 07:43:16 by baud 
modify msg TP041 and TP042 to display an error string build from sense keys/bytes instead of an error number

tape/tpdaemon.c: 1.53 94/05/19 11:15:42 by baud 
/etc/TPCONFIG processing: increase buffer size to 82, skip blank lines and give a message TP043 if line too long

NEW file: tape/tperror.c(1.1)
tape/tperror.c: 1.1 94/05/17 08:28:50 by baud 
date and time created 94/05/17 08:28:50 by baud

tape/unldtape.c: 1.7 94/05/17 08:31:29 by baud 
calls rpttperror to give a meaningful error msg build from sense keys/bytes and does an ioctl MTUNLOAD for sgi (MTOFFL for other platforms)

tape/usrlbl.c: 1.8 94/05/26 10:11:45 by baud 
add missing parameter for usrmsg in getlabelinfo

tape/writelbl.c: 1.6 94/05/17 08:27:21 by baud 
calls rpttperror to give a meaningful error msg build from sense keys/bytes

tape/wrttpmrk.c: 1.7 94/05/17 08:28:17 by baud 
calls rpttperror to give a meaningful error msg build from sense keys/bytes

rfio/Imakefile: 1.15 94/05/16 19:50:18 by acher 
added chown.o object file to library rfio.

rfio/Imakefile: 1.14 94/05/06 10:21:53 by simmins 
Added mkdir.o

rfio/Imakefile: 1.13 94/05/02 19:03:07 by acher 
rfio_readlink() added to rfio library.

rfio/chkserv.c: 1.2 94/04/22 12:59:55 by acher 
Added response from server to the protocol of check.

NEW file: rfio/chown.c(1.1)
rfio/chown.c: 1.1 94/05/16 19:49:05 by acher 
date and time created 94/05/16 19:49:05 by acher

rfio/error.c: 3.8 94/04/26 11:33:06 by acher 
Modified the display of perror() to behave like former versions of SHIFT.

rfio/fio.c: 1.12 94/05/05 19:15:10 by acher 
Put up errno and serrno in cases of failure.

NEW file: rfio/mkdir.c(1.2)
rfio/mkdir.c: 1.2 94/05/16 19:45:50 by acher 
Protocol modified with server to propagate requestor's uid &gid.

NEW file: rfio/readlink.c(1.1)
rfio/readlink.c: 1.1 94/05/02 19:00:14 by acher 
date and time created 94/05/02 19:00:14 by acher

rfio/rfio_calls.c: 3.20 94/05/16 19:43:59 by acher 
Added srchown(), corrected srmkdir(), substituted redundant code with function chsuser().

rfio/rfio_calls.c: 3.19 94/05/06 10:15:36 by simmins 
Added mkdir()

rfio/rfio_calls.c: 3.18 94/05/02 19:12:08 by acher 
srreadlink() added to server.

rfio/rfio_calls.c: 3.17 94/04/22 13:04:33 by acher 
function srchk() replies to a "connection check" request.

rfio/rfio_fcalls.c: 3.12 94/05/05 19:18:14 by acher 
rfiod sends error codes (possibly serrno numbers) to the clients

rfio/rfio_serv.c: 3.29 94/05/31 17:33:57 by acher 
New version for both OSF1 V 1.3 and OSF1 V 2.0, needed explicitely to disconnect TTY with ioctl().

rfio/rfio_serv.c: 3.28 94/05/16 19:53:49 by acher 
Added entry for CHOWN request and modified call to srmkdir().

rfio/rfio_serv.c: 3.27 94/05/10 10:31:06 by acher 
shutdown socket after statfs request.

rfio/rfio_serv.c: 3.26 94/05/06 10:15:20 by simmins 
Added mkdir()

rfio/rfio_serv.c: 3.25 94/05/02 19:09:54 by acher 
Added daemon server for readlink() request.

rfio/rfio_serv.c: 3.24 94/05/02 12:47:20 by acher 
srchk() requires argument s (socket).

rfio/rfio_serv.c: 3.23 94/05/02 12:19:16 by acher 
SIGHUP is received by daemons at restart of an DEC OSF1 V2.0.

rfio/rfio_serv.c: 3.22 94/04/22 13:01:58 by acher 
added response from server in case of rfio daemon check attempt.

rfio/xyread.c: 3.10 94/05/05 19:20:34 by acher 
xyread() can handle serrno numbers.

rfio/xywrite.c: 3.10 94/05/05 19:22:08 by acher 
xywrit() can handle serrno numbers.

rtcopy/Imakefile: 1.10 94/05/17 08:50:19 by baud 
if defined(_IBMR2), links with -lodm because of getdvrnam called from tpio.c

rtcopy/Imakefile: 1.9 94/05/09 20:17:50 by acher 
BIN specifies the location of binaries called by rtcopyd.

rtcopy/Imakefile: 1.8 94/05/09 19:09:24 by acher 
Replaced in rtcopy.shift file names by variables defined in site.def

rtcopy/dktotpU.c: 2.18 94/06/01 12:55:31 by acher 
rfio_perror() to print error message.

rtcopy/dktotpU.c: 2.17 94/05/16 20:19:07 by acher 
if error is -1, the user specified a file record length smalled than the record length on disk. Then exit with USERR.

rtcopy/dktotpU.c: 2.16 94/05/11 17:22:57 by acher 
Added logging statements

rtcopy/rtcopy.shift: 2.31 94/06/01 12:59:32 by acher 
Added command name in the same time as interface name and IO rate.

rtcopy/rtcopy.shift: 2.30 94/06/01 12:53:37 by acher 
Added info statement to read info into tape label. 

rtcopy/rtcopy.shift: 2.29 94/05/09 19:16:57 by acher 
Replaced in rtcopy.shift /usr/local/bin by SHIFTBIN.

rtcopy/rtcopy.shift: 2.28 94/05/09 19:04:16 by acher 
Subsituted variable names by names defined info site.def.

rtcopy/rtcopy.shift: 2.27 94/05/06 08:55:50 by acher 
Abort immediatlely with SYERR if stager's interface not installed.

rtcopy/rtcopy.shift: 2.26 94/05/06 07:59:51 by acher 
Test on stageupdc: exit if return code is not equal to 0.

rtcopy/rtcopy.shift: 2.25 94/05/05 19:59:06 by acher 
When stageupdc returns a non zero value, exit with SYERR.

rtcopy/rtcopyd.c: 2.40 94/05/09 20:15:21 by acher 
/usr/local/bin is replaced by BIN in the code.

rtcopy/tpio.c: 1.12 94/05/17 08:38:45 by baud 
calls gettperror to get an error string build from sense keys/bytes

rtcopy/tpread.c: 2.39 94/05/24 12:45:33 by acher 
tpread/tpwrite should pass the vid (not vsn) to TMS.

rtcopy/tpread.man: 1.6 94/05/17 18:46:44 by acher 
-qux sequence added.

rtcopy/tpread.man: 1.5 94/04/26 11:31:32 by acher 
Option -D is replaced by -x (verbose mode switch).

rtcopy/tptodkF.c: 2.16 94/05/09 19:00:09 by acher 
Algorithm to end buffer filling from tread() was wrong .

rtcopy/tptodkU.c: 2.15 94/06/01 12:56:59 by acher 
rfio_perror() to print error message.

rtcopy/tptodkU.c: 2.14 94/05/11 17:24:35 by acher 
Added logging messages.

scripts/assign.aix: 1.2 94/05/06 17:50:57 by hemmer 
Use ln -sf, requireing AIX 3.2.2 (origin: FNAL).

scripts/assign.sgi: 1.3 94/05/06 17:54:37 by hemmer 
test RFASSIGN variable exists (origin: FNAL).

dpm/dpm/Imakefile: 1.5 94/05/02 20:17:24 by acher 
Install man pages for sfget, sfsh. sfrm.

dpm/dpm/sfdpmd.c: 3.9 94/05/16 10:45:06 by acher 
on OSF1 2.0 , use sigaction() to trap SIGCHLD with option SA_RESTART.

dpm/dpm/sfgc.c: 1.42 94/05/16 10:47:03 by acher 
on OSF1 2.0 , use sigaction() to trap SIGCHLD with option SA_RESTART.

config/Library.tmpl: 1.4 94/05/18 17:32:04 by baud 
add directory stage

config/Project.tmpl: 1.5 94/05/18 17:22:34 by baud 
add directory stage

NEW file: stage/Imakefile(1.1)
stage/Imakefile: 1.1 94/04/15 16:57:23 by baud 
date and time created 94/04/15 16:57:23 by baud

NEW file: stage/cleaner.c(1.2)
stage/cleaner.c: 1.2 94/05/09 13:53:03 by baud 
Do not read "NET" entries in /etc/shift.conf for rfio_popen

NEW file: stage/getlisttp.c(1.1)
stage/getlisttp.c: 1.1 94/02/09 08:18:06 by baud 
date and time created 94/02/09 08:18:06 by baud

NEW file: stage/packfseq.c(1.1)
stage/packfseq.c: 1.1 94/02/09 08:18:07 by baud 
date and time created 94/02/09 08:18:07 by baud

NEW file: stage/poolmgr.c(1.3)
stage/poolmgr.c: 1.3 94/05/27 14:48:56 by baud 
use double instead of long to compute percentage of free space in routine enoughfreespace

NEW file: stage/resolveln.c(1.1)
stage/resolveln.c: 1.1 94/04/18 11:15:15 by baud 
date and time created 94/04/18 11:15:15 by baud

NEW file: stage/send2stgd.c(1.4)
stage/send2stgd.c: 1.4 94/05/09 14:22:40 by baud 
Do not read "NET" entries in /etc/shift.conf for rfio_unlink, rfio_symlink

NEW file: stage/sendrep.c(1.2)
stage/sendrep.c: 1.2 94/05/17 15:38:06 by baud 
close rpfd in case of WRITE error only if rep_type = STAGERC

NEW file: stage/stage.h(1.2)
stage/stage.h: 1.2 94/04/28 15:42:12 by baud 
add message STG36 "invalid group"

NEW file: stage/stageclr.c(1.2)
stage/stageclr.c: 1.2 94/05/18 08:42:27 by baud 
stageclr -i did not work correctly if more than one path read from stdin

NEW file: stage/stageclr.man(1.1)
stage/stageclr.man: 1.1 94/03/09 16:42:41 by baud 
date and time created 94/03/09 16:42:41 by baud

NEW file: stage/stagein.c(1.5)
stage/stagein.c: 1.5 94/06/02 07:56:40 by baud 
apollo is not supported

NEW file: stage/stagein.man(1.3)
stage/stagein.man: 1.3 94/05/16 16:13:04 by baud 
takes default pool name from STAGE_POOL environment variable

NEW file: stage/stageput.c(1.1)
stage/stageput.c: 1.1 94/04/15 17:06:20 by baud 
date and time created 94/04/15 17:06:20 by baud

NEW file: stage/stageput.man(1.1)
stage/stageput.man: 1.1 94/02/09 08:25:06 by baud 
date and time created 94/02/09 08:25:06 by baud

NEW file: stage/stageqry.c(1.1)
stage/stageqry.c: 1.1 94/02/09 08:18:10 by baud 
date and time created 94/02/09 08:18:10 by baud

NEW file: stage/stageqry.man(1.3)
stage/stageqry.man: 1.3 94/05/27 09:15:44 by baud 
-p is the only option available when -s is specified

NEW file: stage/stager.c(1.2)
stage/stager.c: 1.2 94/05/31 11:25:39 by baud 
check if pid = 0 before sending kill

NEW file: stage/stageupdc.c(1.1)
stage/stageupdc.c: 1.1 94/04/15 17:02:11 by baud 
date and time created 94/04/15 17:02:11 by baud

NEW file: stage/stgdaemon.c(1.10)
stage/stgdaemon.c: 1.10 94/05/27 08:59:42 by baud 
stageqry -s should not print staged files; if stageclr -c, check available space before removing file

NEW file: stage/stgdaemon.man(1.2)
stage/stgdaemon.man: 1.2 94/05/20 16:44:37 by baud 
add option -a to stageqry in stage_clean example

NEW file: stage/stglogit.c(1.1)
stage/stglogit.c: 1.1 94/02/09 08:24:03 by baud 
date and time created 94/02/09 08:24:03 by baud

************************ VERSION 1.6.3 *****************************
common/remote.c: 1.4 94/04/20 10:14:24 by acher 
SIOCGIFCONF not defined in <sys/ioctl.h> on SOLARIS.

common/remote.c: 1.3 94/04/12 19:23:41 by acher 
RHOSTSFILE should be checked first to enable exclusion list.

common/remote.c: 1.2 94/04/06 21:00:21 by acher 
Searches for networks connected to determine wether host is local or not.

common/serror.c: 1.16 94/03/18 15:26:21 by hemmer 
Added 3 (VMS related) error strings

common/serror.c: 1.15 94/03/16 16:28:24 by acher 
Added an serrno value

common/socket.c: 1.15 94/04/14 10:53:13 by acher 
serrno raised if network problem occured.

examples/Imakefile: 1.4 94/03/30 12:02:06 by acher 
rfcp depends on rfcp.c

examples/rfcp.c: 1.7 94/04/13 10:21:16 by acher 
fcntl.h declared after rfio.h .

examples/rfcp.c: 1.6 94/04/13 10:07:02 by acher 
rfcp is bidirectional if we open second file with rfio also.

h/rfio.h: 3.15 94/04/20 15:37:14 by acher 
Added request number for rfiod check.

h/rfio.h: 3.14 94/04/13 18:31:00 by acher 
Declaration of rfio_serror() added.

h/serrno.h: 1.14 94/03/18 15:26:37 by hemmer 
Added 3 (VMS related) error numbers

h/serrno.h: 1.13 94/03/16 16:29:55 by acher 
Added an serrno value  SEHOSTREFUSED.

tape/3495subr.c: 1.4 94/03/31 09:25:45 by baud 
calls usrmsg instead of tplogit also in openlmcp

tape/Imakefile: 1.8 94/03/21 15:00:31 by baud 
link unloadtps with usrmsg.o and not usrmsg from libtape.a

tape/posittape.c: 1.18 94/04/12 15:59:39 by baud 
when 2 consecutive tpmnt ask for the same file, check that the tape is really positionned to the requested file

tape/tpdaemon.c: 1.52 94/04/15 08:50:48 by baud 
fix SIGCHLD processing for IRIX5

tape/tpdaemon.c: 1.51 94/03/25 09:48:24 by baud 
uids can have 5 digits (previous partial fix destroyed by v 1.50)

tape/tpmnt.c: 1.22 94/04/14 13:29:07 by baud 
vsn and pathname are mandatory

tape/tpmnt.man: 1.11 94/04/14 08:18:45 by baud 
vsn and pathname are mandatory

tape/unloadtps.c: 1.12 94/03/21 15:11:24 by baud 
add declaration for rep because of usrmsg used in demount3495

NEW file: rfio/chkserv.c(1.1)
rfio/chkserv.c: 1.1 94/04/20 15:39:00 by acher 
date and time created 94/04/20 15:39:00 by acher

rfio/connect.c: 3.8 94/04/06 21:14:36 by acher 
If host is badly specified, prevent soft of using it.

rfio/connect.c: 3.7 94/03/29 18:30:34 by acher 
When connect gives ETIMEDOUT, try to switch to another network .

rfio/error.c: 3.7 94/04/18 12:37:00 by acher 
If rfio_connect() fails, send the error list: "Unable to fetch error..." instead of NULL.

rfio/error.c: 3.6 94/04/13 18:28:33 by acher 
Function rfio_serror() retrieves sys_errlist corresponding to the latest rfio request.

rfio/logging.c: 1.5 94/04/20 15:03:30 by acher 
 Panic was not set in a case of multiple close().

rfio/logging.c: 1.4 94/04/20 14:06:20 by acher 
Panic was not set properly in case of multiple rfio_close().

rfio/lseek.c: 3.4 94/04/06 10:38:52 by acher 
Client logging added for seek() calls .

rfio/open.c: 3.9 94/03/16 16:26:10 by acher 
Client looks wether returned code is errno or serrno.

rfio/read.c: 3.8 94/04/06 10:58:07 by acher 
Client logging done before locality test.

rfio/rfio_calls.c: 3.16 94/04/11 12:48:52 by acher 
errno overwritten by call to log().

rfio/rfio_calls.c: 3.15 94/03/16 16:24:08 by acher 
Send specific message when host is not considered local by daemon and no mapping was set.

rfio/rfio_serv.c: 3.21 94/04/20 15:35:43 by acher 
Added entry to check connection with daemon rfiod

rfio/rfio_serv.c: 3.20 94/04/14 18:47:21 by acher 
comment in log when SIGCHLD is trapped

rfio/rfio_serv.c: 3.19 94/04/14 18:18:27 by acher 
On OSF1 with version 2.0, reset SIGCHLD required each time. sigaction() should replace signal().

rfio/write.c: 3.5 94/04/06 10:57:12 by acher 
Client logging done before locality test.

rfio/xyclose.c: 3.8 94/04/19 19:08:18 by acher 
serrno returned instead of errno if serrno != 0. rfio_errno raised.

rfio/xyopen.c: 3.15 94/04/19 19:05:47 by acher 
serrno returned instead of errno if serrno != 0. rfio_errno raised.

rfio/xyread.c: 3.9 94/04/19 18:58:27 by acher 
Returns serrno if serrno is not zero, instead of errno.

rfio/xywrite.c: 3.9 94/04/19 19:03:41 by acher 
rfio_errno raised. If serrno != 0 , return serrno and not errno.

rtcopy/dktotpF.c: 2.14 94/04/19 17:00:06 by acher 
In case of ENOENT, EACCES, EISDIR, EPERM, return "User error".

rtcopy/dktotpU.c: 2.15 94/04/19 16:55:28 by acher 
In case of ENOENT, ISDIR, EPERM, EACCES, return "user error " number.

rtcopy/rtcopy.shift: 2.24 94/04/19 19:15:26 by acher 
Added automatic retries when tpmnt return 9.

rtcopy/rtcopy.shift: 2.23 94/04/06 12:10:58 by acher 
Added test on label type: only nl , al, blp, and sl are supported.

rtcopy/tptodkF.c: 2.15 94/04/19 17:03:29 by acher 
in case of ENOENT, EISDIR, EPERM, EACCES, return "User error" code.

rtcopy/tptodkU.c: 2.13 94/04/19 16:57:43 by acher 
in case of ENOENT,EISDIR,EPERM,EACCES, return "user error" code number.

tms/Imakefile: 1.3 94/03/31 08:11:38 by baud 
add libtms.a to the install targets to be able to do 'make install' without doing a 'make' beforehand

dpm/util/strerror.c: 3.2 94/03/21 15:52:05 by simmins 
Altered log appending to makes logs more readable.

dpm/parser/client.c: 3.4 94/04/11 12:14:11 by acher 
copy table is a global variable because of scope requirements.

dpm/parser/config.c: 3.10 94/03/29 12:29:21 by acher 
Re-wrote some if (..) statements to cope with AIX's 1.3.0.0 cc compiler bug. + added tracing .

dpm/parser/mknet.c: 3.4 94/04/06 11:14:24 by acher 
Return to former sequence of flag tests as bug was localted elsewhere.

dpm/parser/mknet.c: 3.3 94/03/21 15:54:04 by simmins 
Rearranged code order to avoid deadlock.

config/site.def: 1.7 94/03/30 16:07:46 by acher 
Added line DpmUsesRfio for future dpm purpose.

************************ VERSION 1.6.2 *****************************
rfio/xyopen.c: 3.14 94/03/15 18:04:03 by acher 
PPU flag added for HP.

rtcopy/dktotpU.c: 2.14 94/03/15 16:38:44 by acher 
sys/stat.h should be added for all systems.

rtcopy/rtyexit.c: 1.2 94/03/15 16:39:17 by acher 
sys/stat.h should be added for all systems.

rtcopy/tptodkU.c: 2.12 94/03/15 16:22:07 by acher 
sys/stat.h should always be included.

************************ VERSION 1.6.1 *****************************
Extended remote tape service introduced.
./Imakefile: 1.3 94/03/11 14:18:14 by acher 
Erased subdirectory tpsinfo.

./Imakefile: 1.2 94/03/08 18:30:04 by acher 
Including tpsinfo directory.

tape/3495subr.c: 1.3 94/03/07 10:42:46 by baud 
ERA code is sense byte 3 (not 2)

tape/mounttape.c: 1.39 94/03/07 12:05:17 by baud 
reset cfseq to zero if tape not mounted anymore or unit not accessible

tape/tpconfig.man: 1.2 94/03/04 17:33:08 by baud 
add errno=EAGAIN for unit assigned elsewhere

tape/tpdaemon.man: 1.3 94/03/03 16:13:01 by baud 
add support for IBM 3494/3495 robot units driven directly from the RS 6000

tape/tpmnt.man: 1.10 94/03/04 11:48:06 by baud 
add -T option

tape/unldtape.c: 1.6 94/03/04 14:11:07 by baud 
send error message also to the user

rfio/xyopen.c: 3.13 94/03/08 18:28:27 by acher 
Fourth arg. of setsockopt() is a char *.

rtcopy/Imakefile: 1.7 94/03/11 14:15:56 by acher 
tpsinfo.o and tpsinfod daemon compiled and linked to the rtcopy software.

rtcopy/Imakefile: 1.6 94/03/08 17:57:42 by acher 
Modules added.

rtcopy/dktotpF.c: 2.13 94/03/11 14:35:34 by acher 
Installed retries system + option -s to choose data size transfered.

rtcopy/dktotpU.c: 2.13 94/03/11 14:32:17 by acher 
Installed retries system + option -s 

rtcopy/rtcopy.h: 2.6 94/03/08 16:43:21 by acher 
Magic numbers modified for new protocol.

rtcopy/rtcopy.shift: 2.22 94/03/11 14:49:34 by acher 
Performs retries on mounts failed and on transfers failed.

rtcopy/rtcopyd.c: 2.39 94/03/08 16:39:40 by acher 
Started new protocol with client. Checks where client comes from.

rtcopy/rtcopyd.man: 1.4 94/03/08 17:49:17 by acher 
Details administrator's changes to authorize users from other sites to connect.

NEW file: rtcopy/rtyexit.c(1.1)
rtcopy/rtyexit.c: 1.1 94/03/08 16:51:01 by acher 
date and time created 94/03/08 16:51:01 by acher

rtcopy/tpio.c: 1.11 94/03/08 17:54:00 by acher 
Implemented retries system in case of most common retriable failures.

rtcopy/tpread.c: 2.38 94/03/08 16:36:01 by acher 
tpread starting new protocol with server.

rtcopy/tpread.man: 1.4 94/03/08 17:51:44 by acher 
Describes new options ( -R , -I ).

NEW file: rtcopy/tpsinfo.c(1.1)
rtcopy/tpsinfo.c: 1.1 94/03/11 12:31:53 by acher 
date and time created 94/03/11 12:31:53 by acher

NEW file: rtcopy/tpsinfo.h(1.1)
rtcopy/tpsinfo.h: 1.1 94/03/11 12:31:14 by acher 
date and time created 94/03/11 12:31:14 by acher

NEW file: rtcopy/tpsinfod.c(1.2)
rtcopy/tpsinfod.c: 1.2 94/03/11 12:40:19 by acher 
Modified Logfile variable name.

rtcopy/tptodk.c: 2.4 94/03/08 17:25:42 by acher 
Requests can come from some other site now.

rtcopy/tptodkF.c: 2.14 94/03/11 14:27:00 by acher 
Retries system introduced + closing sockets after failure + closing tape device + Added -s option to specify size

rtcopy/tptodkU.c: 2.11 94/03/11 14:30:02 by acher 
Installed retries system + option -s 

config/site.def: 1.6 94/03/11 14:19:53 by acher 
Build tpsinfo.o into rtcopy subdirectory is mandatory if RtcoptClient is required.

************************ VERSION 1.5.4 *****************************
fhs/fhs.h: 1.3 94/02/28 14:01:13 by baud 
add messages FHS20 (Library Attachment check) and FHS21 (Library Manager offline)

fhs/fhsdaemon.c: 1.12 94/02/28 14:08:22 by baud 
add retry for raeson codes 3500 (Library Attachment check) and 3504 (Library Manager offline)

fhs/fhsdaemon.c: 1.11 94/02/28 11:50:03 by baud 
add retry for "unload failure" reason 3692

tape/mounttape.c: 1.38 94/02/28 13:15:09 by baud 
send UPDVSN request before calling fhsexit or mount3495, so unloadtps can remove request from TMS

tape/tpstat.c: 1.7 94/03/01 10:01:36 by baud 
display login name, jid and vsn/vid also if status=wdwn

************************ VERSION 1.5.3 *****************************
common/serror.c: 1.14 94/02/16 15:41:49 by acher 
New serrno inserted: SENORCODE. Does not require synchronicity between servers & daemons.

h/serrno.h: 1.12 94/02/16 15:48:34 by acher 
Added new serrno SENORCODE.

fhs/Imakefile: 1.2 94/02/18 10:13:38 by baud 
add dependency on tms.h for checkjobdied.o and findpgrp.o

fhs/checkjobdied.c: 1.3 94/02/18 13:19:16 by baud 
add error messages and correct for IBMR2: an active job must have p_stat != 0

fhs/findpgrp.c: 1.3 94/02/18 13:40:54 by baud 
add error messages

fhs/send2fhsd.c: 1.3 94/02/14 14:25:04 by baud 
change variable name from 'sun' to 'sname' to stay similar to send2tpd

fhs/send2fhsd.c: 1.2 94/02/14 14:08:49 by baud 
add missing close statements when communicating thru sockets

tape/findpgrp.c: 1.10 94/02/16 10:45:45 by baud 
add error messages

tape/checkjobdied.c: 1.8 94/02/18 08:54:59 by baud 
correc for IBMR2: an active job must have p_stat != 0

tape/checkjobdied.c: 1.7 94/02/16 10:31:49 by baud 
add error messages

tape/getunitstat.c: 1.12 94/02/16 10:25:31 by baud 
add code for ADSTAR driver

tape/mounttape.c: 1.37 94/02/17 14:33:00 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

tape/mounttape.c: 1.36 94/02/16 08:54:41 by baud 
add code dependant on dvrname and call to 3495subr; add also -T option

tape/readlbl.c: 1.11 94/02/17 14:24:13 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

tape/rwndtape.c: 1.6 94/02/17 14:25:21 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

tape/send2tpd.c: 1.8 94/02/14 14:04:27 by baud 
add missing close statements when communicating thru sockets

tape/skiptape.c: 1.6 94/02/17 14:26:15 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

tape/tpdaemon.c: 1.50 94/02/16 09:12:51 by baud 
add call to getdvrnam, add -T option, allow a job to continue using a mounted tape even if the operator configures it down

tape/tpmnt.c: 1.21 94/02/16 08:23:21 by baud 
add -T option

tape/tpstat.c: 1.6 94/02/16 09:15:41 by baud 
display "wdwn" for unit configured down but still assigned

tape/writelbl.c: 1.5 94/02/17 14:28:09 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

tape/wrttpmrk.c: 1.6 94/02/17 14:28:56 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

tape/tape.h: 1.34 94/02/17 11:19:46 by baud 
increases MAXUSER to 24

tape/tape.h: 1.33 94/02/16 08:05:11 by baud 
add -T option, dvrname and messages TP041, TP042

tape/unloadtps.c: 1.11 94/02/16 08:46:24 by baud 
add code dependant on dvrname and call to demount3495

tape/Imakefile: 1.7 94/02/16 08:12:50 by baud 
add getdvrnam.c and -lodm for _IBMR2, 3495subr.c and ADSTAR flag

tape/dmpfil.c: 1.14 94/02/16 10:20:04 by baud 
report sense bytes in case of I/O error for PCTA and ADSTAR drivers

tape/usrmsg.c: 1.3 94/02/17 14:27:26 by baud 
tplogit is now called from inside usrmsg if NOTRACE is not defined

NEW file: tape/getdvrnam.c(1.1)
tape/getdvrnam.c: 1.1 94/02/16 08:19:23 by baud 
date and time created 94/02/16 08:19:23 by baud

NEW file: tape/3495subr.c(1.2)
tape/3495subr.c: 1.2 94/02/17 14:31:00 by baud 
calls usrmsg instead of tplogit

tape/usrlbl.c: 1.7 94/02/16 08:21:47 by baud 
add -T option

tape/lddisplay.c: 1.5 94/02/16 10:22:40 by baud 
add code for ADSTAR driver

rfio/error.c: 3.5 94/02/15 11:30:52 by acher 
 host where rfio errno is imported from is displayed by rfio_perror() .

rfio/open.c: 3.8 94/02/16 15:37:49 by acher 
If daemon does not return error reason and rfio_open() failed, serrno = SENORCODE.

rfio/read.c: 3.7 94/02/21 10:59:47 by acher 
If rcode is 0 and read failed , raise serrno.

rfio/write.c: 3.4 94/02/21 10:58:12 by acher 
If rcode is 0 and write failed, raise serrno.

sysreq/xdr.c: 1.13 94/02/14 17:39:51 by hemmer 
VM doesn't like redefined MACRO's

tms/checkjobdied.c: 1.7 94/02/18 13:16:35 by baud 
add error messages and correct for IBMR2: an active job must have p_stat != 0

tms/send2tmsd.c: 1.10 94/02/14 14:16:48 by baud 
add missing close statements when communicating thru sockets

tms/Imakefile: 1.2 94/02/18 10:11:58 by baud 
add dependency on tms.h for checkjobdied.o and findpgrp.o

tms/findpgrp.c: 1.3 94/02/18 13:38:06 by baud 
add error messages

************************ VERSION 1.5.2 *****************************
h/rfio.h: 3.13 94/02/10 18:00:43 by acher 
Maximum string length for rfiod on VMS.

rfio/open.c: 3.7 94/02/10 17:57:51 by acher 
New string for future use for VMS hosts.

rfio/rfio_calls.c: 3.14 94/02/10 17:56:14 by acher 
New string for future use for VMS hosts.

************************ VERSION 1.5.1 *****************************
Version 1.5 incorporates RFIO extensions allowing
o inter-site communications
o improved security
o many functional extensions
In addition ... many bug fixes.
common/Imakefile: 1.6 94/02/09 12:21:02 by acher 
remote.c , solveln.c , user.lex and user.yacc added to common.

NEW file: common/remote.c(1.1)
common/remote.c: 1.1 94/02/09 12:17:24 by acher 
date and time created 94/02/09 12:17:24 by acher

NEW file: common/user.lex(1.1)
common/user.lex: 1.1 94/02/09 12:14:02 by acher 
date and time created 94/02/09 12:14:02 by acher

NEW file: common/user.yacc(1.1)
common/user.yacc: 1.1 94/02/09 12:15:40 by acher 
date and time created 94/02/09 12:15:40 by acher

h/rfio.h: 3.12 94/02/09 14:37:59 by acher 
Added rfio calls and magic numbers corresponding.

fhs/fhs.h: 1.2 94/02/07 14:29:30 by baud 
add message "FHS19 - cannot get memory"

msg/msg.c: 1.11 94/01/12 10:51:29 by acher 
socket sock closed at line 499.

tape/mounttape.c: 1.35 94/02/04 09:38:07 by baud 
alpha osf and Solaris 2.3 do not support correctly select on named pipes

tape/mounttape.c: 1.34 94/02/01 12:28:22 by baud 
check reopen return code to avoid Bad file number

tape/posittape.c: 1.17 93/11/19 14:07:08 by baud 
make option -qn work even if tape is only prelabelled

tape/send2tpd.c: 1.7 94/01/24 15:58:57 by baud 
Solaris 2.3 does not support correctly select on named pipes

tape/sendrep.c: 1.7 94/01/24 15:57:11 by baud 
Solaris 2.3 does not support correctly select on named pipes

tape/tpdaemon.c: 1.49 94/01/24 16:00:54 by baud 
Solaris 2.3 does not support correctly select on named pipes

tape/tpdaemon.c: 1.48 94/01/18 09:30:58 by baud 
uids can have 5 digits

tape/tpdaemon.c: 1.47 93/11/29 12:10:02 by baud 
initialize rqfd when taking request out of retry queue

tape/tplogit.c: 1.5 94/02/09 16:05:16 by baud 
save/restore errno

tape/usrmsg.c: 1.2 94/02/09 16:06:41 by baud 
save/restore errno

rfio/Imakefile: 1.12 94/02/09 15:26:25 by acher 
added files to be compiled and linked to rfiod.

rfio/Imakefile: 1.11 93/12/01 10:48:51 by acher 
logging.h belongs to SHIFT/rfio.

rfio/Imakefile: 1.10 93/11/26 13:01:59 by acher 
dump_log.c compiled with CFLAGS.

NEW file: rfio/access.c(1.1)
rfio/access.c: 1.1 94/02/09 10:02:43 by acher 
date and time created 94/02/09 10:02:43 by acher

NEW file: rfio/checkkey.c(1.1)
rfio/checkkey.c: 1.1 94/02/09 14:59:50 by acher 
date and time created 94/02/09 14:59:50 by acher

rfio/close.c: 3.3 94/02/09 14:29:12 by acher 
rfio_errno set if error occurs at remote close() .

rfio/connect.c: 3.6 94/02/09 14:58:51 by acher 
Retry through another host if connect gives EHOSTUNREACH or ECONNREFUSED, look wether daemon connected is on same network or not.

rfio/dump_log.c: 1.3 93/11/30 19:04:53 by acher 
logging.h on rfio

rfio/dump_log.c: 1.2 93/11/26 12:59:10 by acher 
logging.h moved to ../h.

rfio/error.c: 3.4 94/02/09 14:25:23 by acher 
adapted to modifications on rfio_connect() .

rfio/logging.c: 1.3 93/11/30 18:54:21 by root 
logging.h on SHIFT/rfio.

rfio/logging.c: 1.2 93/11/26 12:50:58 by acher 
RFIO_KERNEL unused. logging.h moved to the "h" directory.

NEW file: rfio/lstat.c(1.1)
rfio/lstat.c: 1.1 94/02/09 12:43:42 by acher 
date and time created 94/02/09 12:43:42 by acher

rfio/open.c: 3.6 94/02/09 15:06:14 by acher 
Protocol with server modified. Truncation implemented at xyopen().

rfio/popen.c: 1.5 94/02/09 15:13:48 by acher 
Protocol modified with server.

rfio/popen.c: 1.4 94/01/05 15:38:42 by acher 
CHecking that popen() returns non null pointer.

rfio/popen.c: 1.3 93/12/09 08:59:29 by acher 
Return code is LONG.

rfio/pread.c: 1.3 94/02/09 12:35:13 by acher 
pread() returns a non-null terminated buffer.

rfio/read.c: 3.6 94/02/09 14:33:53 by acher 
if socket negative, try local read ().

rfio/rfio_calls.c: 3.13 94/02/09 15:17:35 by acher 
Protocol with clients modified , calls popen() , pread() , pwrite(), pclose(), access() , lstat() added or modified.

rfio/rfio_calls.c: 3.12 93/12/09 08:57:49 by acher 
Return code status should be LONG.

rfio/rfio_fcalls.c: 3.11 94/02/09 15:20:12 by acher 
open() protocol modified , with backward compatibility.

rfio/rfio_serv.c: 3.18 94/02/09 15:11:52 by acher 
Protocol with clients modified but backward compatible.

rfio/rfio_serv.c: 3.17 94/01/18 12:00:04 by acher 
Zombies of OSF 1.3 on Dec ALPHA machines erased in standalone mode.

rfio/stat.c: 3.3 94/02/09 12:45:28 by acher 
rfio_connect() changed.

rfio/statfs.c: 1.2 94/02/09 14:55:08 by acher 
Adapted to rfio_connect() 's modification.

rfio/symlink.c: 1.4 94/02/09 12:11:33 by acher 
Modified for new rfio_connect().

rfio/symlink.c: 1.3 94/01/12 17:59:54 by acher 
In local mode, file name to unlink is the file name returned by rfio_parse().

rfio/write.c: 3.3 94/02/09 14:31:21 by acher 
if socket negative, try local write() .

rfio/xyopen.c: 3.12 94/02/09 15:03:56 by acher 
Protocol with server modified. Truncation implemented at xyopen().

sysreq/sysreqf.c: 1.15 93/12/14 06:47:55 by hemmer 
reptxt now freeed AFTER user buffer copy.

tms/send2tmsd.c: 1.9 94/01/24 16:13:16 by baud 
Solaris 2.3 does not support correctly select on named pipes

tms/sendrep.c: 1.7 94/01/24 16:07:50 by baud 
Solaris 2.3 does not support correctly select on named pipes

tms/tmsdaemon.c: 1.20 94/01/24 16:15:27 by baud 
Solaris 2.3 does not support correctly select on named pipes

dpm/parser/client.c: 3.3 94/02/08 16:56:53 by acher 
Pointer copy not initialized.

dpm/dpm/Imakefile: 1.4 93/12/06 18:17:29 by acher 
Creating links sfget.man-> dpm.man, and also for sfrm.man and sfsh.man.

dpm/dpm/dosfget.c: 3.11 94/01/20 18:01:38 by acher 
readlink() does not leave a \0 terminated string on SGI, SOLARIS, and ULTRIX systems. 

dpm/dpm/dpm.man: 3.3 93/12/06 19:01:10 by acher 
Added explanations on sfrm, sfget , sfsh return codes.

dpm/dpm/sfgc.man: 1.5 93/12/14 16:11:15 by acher 
Corrected typing errors.

config/site.def: 1.5 94/02/09 12:30:31 by acher 
constants added.

config/site.def: 1.4 94/02/09 09:38:11 by baud 
add default configuration for stager, but set BuildStage to NO

************************ VERSION 1.4.1 *****************************
imake is now used to configure the whole package.
RS6000 S/370 Channel Emulator support added
IBM3495 Foreign Host Server support added
ALPHA OSF/1 support added
Solarix 2.x support added
SGI Irix 5 support added
NEW file: ./Imakefile(1.1)
./Imakefile: 1.1 93/02/24 16:17:58 by baud 
date and time created 93/02/24 16:17:58 by baud

NEW file: ./Makefile.ini(1.1)
./Makefile.ini: 1.1 93/02/24 16:17:48 by baud 
date and time created 93/02/24 16:17:48 by baud

NEW file: common/Imakefile(1.5)
common/Imakefile: 1.5 93/10/27 17:08:56 by acher 
on Suns having ULTRA, add the ULTRA flag.

common/getconfent.c: 1.7 93/10/20 11:18:11 by acher 
not setting serrno to SEENTRYNFND: unused.

common/getifnam.c: 1.12 93/11/02 11:01:49 by acher 
Warning on SunOs 5.2 removed

common/getifnam.c: 1.11 93/10/27 17:10:18 by acher 
On Suns, use another ioctl call to get interface name.

common/getifnam.c: 1.10 93/10/20 12:24:23 by acher 
Adapted getifnam() to ULTRA use on sun.

common/getifnam.c: 1.9 93/02/19 15:35:46 by baud 
add support for SOLARIS

common/log.c: 1.15 93/10/25 12:52:53 by acher 
Remove exit when process can't log().

common/log.c: 1.14 93/08/09 12:33:03 by acher 
When log file can't be opened, send alert in syslog.

common/log.c: 1.13 93/05/14 18:46:31 by acher 
Solved the problem occuring when root's umask is not 0: The log file was created at run time with unsufficient privilege left to the users which caused the program to abort. Concerns rfiod & rtcopyd only.

common/log.c: 1.12 93/05/12 18:51:13 by acher 
Ported to Irix5 & dec/alpha's osf1.

common/log.c: 1.11 93/03/17 09:13:29 by acher 
Removed a bug on compilation for ULTRIX.

common/log.c: 1.10 93/03/03 12:10:04 by acher 
Modified logit() to open and close the log file before logging and after logging, each time. This is enabling to remove or move the log file at run time without loosing any information.

common/log.c: 1.9 93/02/19 15:37:59 by baud 
add support for SOLARIS

common/socket.c: 1.14 93/11/02 11:05:24 by acher 
 SunOs 5.2 sys V preprocessor prefers " defined (cray-xmp)" to "ifdef cray-xmp"

NEW file: common/solveln.c(1.2)
common/solveln.c: 1.2 93/11/02 11:03:08 by acher 
Warning on SunOs 5.2 removed  

NEW file: examples/Imakefile(1.3)
examples/Imakefile: 1.3 93/08/16 16:43:46 by baud 


examples/diskperf.b.c: 1.6 93/11/18 08:41:04 by acher 
 Solaris 2.2 requires explicit casts for function arguments.

examples/diskperf.b.c: 1.5 93/02/19 15:59:54 by baud 
use memset/memcpy instead of bzero/bcopy because of SOLARIS

examples/diskperf.c: 1.5 93/11/18 08:39:53 by acher 
Solaris 2.2 requires explicit casts for function arguments.

examples/diskperf.c: 1.4 93/02/19 16:01:10 by baud 
use memset/memcpy instead of bzero/bcopy because of SOLARIS

examples/report.c: 1.7 93/02/19 16:02:43 by baud 
add support for SOLARIS

NEW file: h/Imakefile(1.1)
h/Imakefile: 1.1 93/02/19 16:04:00 by baud 
date and time created 93/02/19 16:04:00 by baud

h/log.h: 1.3 93/02/19 16:05:46 by baud 
syslog is of type void under SOLARIS

h/patchlevel.h: 1.3 93/11/18 17:39:06 by hemmer 
version and patchlevels are now postprocessed at generation time

h/rfcntl.h: 1.7 93/06/28 19:21:14 by acher 
Ported to SOLARIS: data representation for disk I/O flags is different on SunOS 4.XX and SOLARIS.

h/rfcntl.h: 1.6 93/05/14 10:41:39 by acher 
Ported to Dec/alpha under OSF   

h/rfio.h: 3.11 93/11/17 18:35:43 by acher 
Entered popen functionality.

h/rfio.h: 3.10 93/09/17 09:18:32 by acher 
New constants definitions for setopt.

h/rfio.h: 3.9 93/09/07 16:30:39 by acher 
Added structure definition rfstatfs.

h/rfio.h: 3.8 93/08/05 14:25:16 by acher 
added integer for rfio_symlink() requests.

h/rfio.h: 3.7 93/05/14 10:38:59 by acher 
Ported to Dec/alpha under OSF   

h/rfio.h: 3.6 93/03/10 18:50:37 by acher 
corrected 1 bug into switch_req & needed to add 2 constants into header file

h/rfio.h: 3.5 93/03/04 16:35:05 by acher 
ADDED the constant definition of FFOOPT_T for the truncate mode un udf_open().

h/rfio.h: 3.4 93/02/19 16:08:13 by baud 
struct iovec is already defined by SOLARIS

NEW file: lib/Imakefile(1.2)
lib/Imakefile: 1.2 93/08/03 15:54:33 by hemmer 
added ALPHA/OSF symtab entry (________64ELEL_)

NEW file: fhs/Imakefile(1.1)
fhs/Imakefile: 1.1 93/02/19 15:16:00 by baud 
date and time created 93/02/19 15:16:00 by baud

NEW file: fhs/checkjobdied.c(1.2)
fhs/checkjobdied.c: 1.2 93/05/27 16:50:31 by baud 
add support for IRIX5 and alpha osf (similar to SOLARIS)

NEW file: fhs/fhs.h(1.1)
fhs/fhs.h: 1.1 93/02/19 15:16:31 by baud 
date and time created 93/02/19 15:16:31 by baud

NEW file: fhs/fhsactive.c(1.1)
fhs/fhsactive.c: 1.1 93/02/19 15:16:41 by baud 
date and time created 93/02/19 15:16:41 by baud

NEW file: fhs/fhsdaemon.c(1.10)
fhs/fhsdaemon.c: 1.10 93/09/27 08:24:06 by baud 
configure device down if reason 3128 (device cannot be opened)

NEW file: fhs/fhsexit.c(1.2)
fhs/fhsexit.c: 1.2 93/05/04 15:12:47 by baud 
deletes erroneous comment

NEW file: fhs/fhslogit.c(1.2)
fhs/fhslogit.c: 1.2 93/05/27 16:54:19 by baud 
use varargs because of alpha osf (pointers are 64 bits, int are 32 bits)

NEW file: fhs/fhsreq.c(1.3)
fhs/fhsreq.c: 1.3 93/05/04 15:27:19 by baud 
device group is not used anymore; a break was missing

NEW file: fhs/fhstat.c(1.1)
fhs/fhstat.c: 1.1 93/02/19 15:17:44 by baud 
date and time created 93/02/19 15:17:44 by baud

NEW file: fhs/findpgrp.c(1.2)
fhs/findpgrp.c: 1.2 93/05/27 16:48:31 by baud 
add support for IRIX5 and alpha osf (similar to SOLARIS)

NEW file: fhs/msg.c(1.1)
fhs/msg.c: 1.1 93/02/19 15:18:13 by baud 
date and time created 93/02/19 15:18:13 by baud

NEW file: fhs/nofhs.c(1.1)
fhs/nofhs.c: 1.1 93/02/19 15:18:26 by baud 
date and time created 93/02/19 15:18:26 by baud

NEW file: fhs/send2fhsd.c(1.1)
fhs/send2fhsd.c: 1.1 93/02/19 15:18:38 by baud 
date and time created 93/02/19 15:18:38 by baud

NEW file: fhs/sendrep.c(1.1)
fhs/sendrep.c: 1.1 93/02/19 15:18:49 by baud 
date and time created 93/02/19 15:18:49 by baud

NEW file: msg/Imakefile(1.4)
msg/Imakefile: 1.4 93/08/16 16:45:41 by baud 
suppress -f $(MAKEFILE) on make calls

msg/infd.c: 1.8 93/11/02 11:40:25 by acher 
on  SunOs 5.2 , need proper cast for functions return code.

msg/msg.c: 1.10 93/11/17 18:46:05 by acher 
Solaris 5.2 requires explicit casts.

msg/msg.c: 1.9 93/08/09 10:42:21 by acher 
Close socket after connection attempt to daemon failed.

msg/msg.c: 1.8 93/02/19 16:17:04 by baud 
use memset instead of bzero because of SOLARIS

msg/msgd.c: 1.10 93/11/02 11:38:55 by acher 
on  SunOs 5.2 , need proper cast for functions return code.

msg/msgdaemon.c: 1.14 93/11/02 11:45:16 by acher 
On SunOS 5.2, need explicit argument binding, otherwise warnings.

msg/msgdaemon.c: 1.13 93/08/11 16:05:04 by acher 
Add hosts list authorized to reply.

msg/msgdaemon.c: 1.12 93/05/28 13:17:51 by baud 
add ifdefs for alpha osf

msg/msgdaemon.c: 1.11 93/02/19 16:18:41 by baud 
add support for SOLARIS

msg/msgr.c: 1.10 93/11/02 11:36:08 by acher 
on  SunOs 5.2 , need proper cast for function args, otherwise warnings.

msg/msgr.c: 1.9 93/10/21 14:42:52 by acher 
When user is not found by cuserid(), substitute message and continue.

msg/msgr.c: 1.8 93/05/28 12:15:39 by baud 
add definition of cuserid for alpha osf

msg/oper.c: 1.14 93/08/16 15:57:20 by baud 
signal handler must be reset each time (some missing for hpux and SOLARIS)

msg/oper.c: 1.13 93/05/28 13:14:44 by baud 
add ifdefs for alpha osf

msg/oper.c: 1.12 93/02/19 16:20:18 by baud 
add support for SOLARIS

msg/term.c: 1.8 93/02/19 16:21:21 by baud 
add support for SOLARIS

NEW file: tape/Imakefile(1.6)
tape/Imakefile: 1.6 93/09/13 14:10:23 by baud 
introduces new usrmsg routine and suppress usrtplogit

tape/buildhdrlbl.c: 1.5 93/06/14 16:08:24 by baud 
correct previous feature ('P' was incorrectly put in hdr2 for exabytes and robot tapes without IDRC)

tape/buildhdrlbl.c: 1.4 93/04/28 07:50:30 by baud 
support for alphanumeric densities, IDRC

tape/checkjobdied.c: 1.6 93/05/27 15:46:36 by baud 
add support for IRIX5 and alpha osf (similar to SOLARIS)

tape/checkjobdied.c: 1.5 93/02/19 16:45:27 by baud 
add support for SOLARIS

NEW file: tape/cvtden.c(1.2)
tape/cvtden.c: 1.2 93/07/27 12:06:52 by baud 
reintroduce 43200 as valid density because of old applications

tape/dmpfil.c: 1.13 93/05/25 08:02:27 by baud 
correct alphanumeric density processing

tape/dmpfil.c: 1.12 93/04/28 07:58:18 by baud 
support for alphanumeric densities

tape/dmpfil.c: 1.11 93/02/19 16:51:15 by baud 
add support for RS6000PCTA

tape/dumptape.sh: 1.4 93/10/04 15:55:31 by baud 
sets density for all devices, CART excepted

tape/dumptape.sh: 1.3 93/05/18 14:14:42 by baud 
correct check on reserv return code

tape/findpgrp.c: 1.9 93/05/27 15:44:50 by baud 
add support for IRIX5 and alpha osf (similar to SOLARIS)

tape/findpgrp.c: 1.8 93/02/19 16:53:22 by baud 
add support for SOLARIS

tape/getunitstat.c: 1.11 93/11/08 16:22:41 by baud 
PCTA driver returns now ENOTREADY instead of EIO when unit not ready

tape/getunitstat.c: 1.10 93/05/27 15:35:22 by baud 
support alpha osf like ultrix

tape/getunitstat.c: 1.9 93/05/27 07:21:11 by baud 
change to include new mtio.h for PCTA release 2.0

tape/getunitstat.c: 1.8 93/02/19 16:54:55 by baud 
add support for RS6000PCTA

tape/lddisplay.c: 1.4 93/05/27 07:12:25 by baud 
change to include new mtio.h for PCTA release 2.0

tape/lddisplay.c: 1.3 93/02/19 16:56:35 by baud 
add support for RS6000PCTA

tape/mounttape.c: 1.33 93/07/19 13:31:26 by baud 
avoid link error when _IBMR2 is defined but RS6000PCTA is not

tape/mounttape.c: 1.32 93/07/19 12:04:45 by baud 
avoid compilation error in reselect option if FHS and TMS are not defined

tape/mounttape.c: 1.31 93/05/27 14:59:11 by baud 
mods to accept both SCSI and PCTA units on the same RS6000

tape/mounttape.c: 1.30 93/05/04 13:38:12 by baud 
check for zero length operator reply and put the operator comments in the logs

tape/mounttape.c: 1.29 93/04/28 07:54:08 by baud 
support for reselect

tape/mounttape.c: 1.28 93/04/02 08:20:28 by baud 
aborts request if vsn mismatch and not manual unit

tape/mounttape.c: 1.27 93/02/23 12:09:04 by baud 
add support for SOLARIS, RS6000PCTA, IBM3495 Foreign Host Server

tape/posittape.c: 1.16 93/09/27 13:53:51 by baud 
check EXPIRATION date intead of creation date and considers a file with an expiration date 000000 as expired.

tape/posittape.c: 1.15 93/09/13 13:58:43 by baud 
remove incorrect code added for SOLARIS + send TP030 message only if no precise message can be sent

tape/posittape.c: 1.14 93/08/19 17:02:04 by baud 
Under Solaris, EOFs remain pending

tape/posittape.c: 1.13 93/05/28 10:27:18 by baud 
accept prelabels done on VM thru TAPE WVOL1 command (fseq = 0)

tape/readlbl.c: 1.10 93/09/13 14:14:14 by baud 
use tplogit only if called from tpdaemon overlays, always send error message to user

tape/rls.c: 1.12 93/04/28 07:52:54 by baud 
support for release pending

tape/rls.man: 1.4 93/04/28 08:06:09 by baud 
add return code for release pending

tape/rwndtape.c: 1.5 93/09/13 14:15:27 by baud 
use tplogit only if called from tpdaemon overlays, always send error message to user

tape/send2tpd.c: 1.6 93/05/27 16:05:06 by baud 
add support for alpha osf

tape/sendrep.c: 1.6 93/05/27 15:58:10 by baud 
add support for alpha osf

tape/skiptape.c: 1.5 93/09/13 14:18:39 by baud 
use tplogit only if called from tpdaemon overlays, always send error message to user

tape/tape.h: 1.32 93/10/12 12:03:38 by baud 
add return code to message "TP009 - could not configure %s"

tape/tape.h: 1.31 93/08/19 11:22:26 by baud 
add missing parenthesis in definitions of D38KC and D38KDC

tape/tape.h: 1.30 93/05/25 08:11:36 by baud 
add densities 38KC and 38KDC

tape/tape.h: 1.29 93/05/04 13:39:38 by baud 
modify message TP023 to include operator comments

tape/tape.h: 1.28 93/04/28 07:48:53 by baud 
support for alphanumeric densities, IDRC, release pending, reselect

tape/tape.h: 1.27 93/04/02 08:21:31 by baud 
add message TP039: vsn mismatch

tape/tape.h: 1.26 93/02/19 17:01:03 by baud 
define MAXHOSTNAMELEN for SOLARIS

tape/tpconfig.c: 1.4 93/10/12 12:05:05 by baud 
add return code to message "TP009 - could not configure %s"

tape/tpdaemon.c: 1.46 93/10/14 15:09:41 by baud 
does not accept to configure unit up if open returns ENOENT, gets major/minor number every time a device is configured up, not only at tpdaemon startup time

tape/tpdaemon.c: 1.45 93/06/14 09:38:14 by baud 
add ASSIGN/UNASSIGN to inittut (configuration at daemon startup)

tape/tpdaemon.c: 1.44 93/06/08 10:47:07 by baud 
add ASSIGN/UNASSIGN to tpconfig processing for IBMESA and RS6000PCTA

tape/tpdaemon.c: 1.43 93/05/27 15:53:44 by baud 
add support for IRIX5 and alpha osf

tape/tpdaemon.c: 1.42 93/04/28 07:56:02 by baud 
support for alphanumeric densities, release pending, reselect

tape/tpdaemon.c: 1.41 93/04/02 16:10:39 by baud 
uses waitpid instead of wait for IBMR2 and SOLARIS

tape/tpdaemon.c: 1.40 93/03/18 10:39:48 by baud 
fixes logging of process exiting for ULTRIX and SunOS

tape/tpdaemon.c: 1.39 93/03/12 09:12:17 by baud 
logs errno value if read returns -1; does not call signal in wait4child for IBMR2 and SOLARIS

tape/tpdaemon.c: 1.38 93/02/26 10:31:40 by baud 
restart automatically the read after SIGCHLD for AIX and SOLARIS

tape/tpdaemon.c: 1.37 93/02/19 17:03:07 by baud 
add support for SOLARIS, IBM3495 Foreign Host Server

tape/tpdaemon.man: 1.2 93/05/27 17:57:02 by baud 
add information for fhs and Parallel Channel Attachment

tape/tplabel.c: 1.8 93/04/28 07:46:26 by baud 
support for alphanumeric densities

tape/tplabel.man: 1.3 93/04/28 08:17:26 by baud 
add new alphanumeric densities

tape/tplogit.c: 1.4 93/05/27 14:47:09 by baud 
use varargs because of alpha osf (pointers are 64 bits, int are 32 bits)

tape/tpmnt.c: 1.20 93/05/04 13:21:40 by baud 
if fid is longer that 17 characters, the last 17 characters are used

tape/tpmnt.c: 1.19 93/04/28 07:47:22 by baud 
support for alphanumeric densities

tape/tpmnt.man: 1.9 93/04/28 08:25:27 by baud 
add new alphanumeric densities

tape/unloadtps.c: 1.10 93/06/09 08:55:02 by baud 
erase display even if no tape mounted

tape/unloadtps.c: 1.9 93/05/27 14:57:33 by baud 
mods to accept both SCSI and PCTA units on the same RS6000

tape/unloadtps.c: 1.8 93/02/23 13:17:51 by baud 
add support for IBM3495 Foreign Host Server

tape/usrlbl.c: 1.6 93/09/13 14:19:53 by baud 
use tplogit only if called from tpdaemon overlays, always send error message to user

tape/usrlbl.c: 1.5 93/05/10 17:36:14 by baud 
wrteotmrk will position in front of the 2 tape marks to make -qm-n work on AIX which returns EIO and not EOF for blank tape

NEW file: tape/usrmsg.c(1.1)
tape/usrmsg.c: 1.1 93/09/13 14:20:19 by baud 
date and time created 93/09/13 14:20:19 by baud

tape/writelbl.c: 1.4 93/09/13 14:16:30 by baud 
use tplogit only if called from tpdaemon overlays, always send error message to user

tape/wrttpmrk.c: 1.5 93/09/13 14:17:23 by baud 
use tplogit only if called from tpdaemon overlays, always send error message to user

NEW file: rfio/Imakefile(1.9)
rfio/Imakefile: 1.9 93/11/18 16:43:54 by hemmer 
logging dependencies

rfio/close.c: 3.2 93/11/18 17:05:13 by hemmer 
added client logging

rfio/connect.c: 3.5 93/09/17 09:38:47 by acher 
Reading "NET" option with rfioreadopt().

rfio/connect.c: 3.4 93/08/20 15:54:35 by acher 
rfio_errno should no be raised if connection failed.

rfio/connect.c: 3.3 93/03/08 15:07:59 by acher 
Propagated errno in rfio_errno variable.

NEW file: rfio/dump_log.c(1.1)
rfio/dump_log.c: 1.1 93/11/15 17:18:01 by murali 
date and time created 93/11/15 17:18:01 by murali

rfio/error.c: 3.3 93/07/26 11:14:22 by acher 
Modified error display in perror(). Only one line for en error.

rfio/error.c: 3.2 93/06/29 16:26:34 by acher 
perror() now displays the real error message fetched on the server.

rfio/ferror.c: 3.3 93/05/06 09:47:14 by acher 
Corrected bug due to typing error.

rfio/fio.c: 1.11 93/07/23 13:32:06 by acher 
We detect if a file open as a US fortran file is really US. If not, send back SEBADFFORM.     

rfio/fio.c: 1.10 93/03/17 09:02:13 by acher 
Ultrix does not like "=-1" strings in C code.

rfio/fio.c: 1.9 93/03/11 08:00:24 by acher 
When a file is write - protected an open will try to open it it RDONLY mode, and if the directory is write protected and the file does not exist the error number EACCES is returned instead of ENOENT.

rfio/fio.c: 1.8 93/03/10 18:55:12 by acher 
Corrected 1 bug: No automatic TRUNCATION should be performed. Truncation has to be requested by user with a 'T' in CHOPT parameter.

rfio/fio.c: 1.7 93/03/04 16:29:13 by acher 
OPENINING A FILE IN US MODE OPENS A FILE IN TRUNC MODE IF APPEND WAS NOT SPECIFIED. FOR THE UD MODE , AN OPTION T HAS BEEN ADDED TO ENABLE A TRUNCATE INTO THE FILE OPENING MODE. BY DEFAULT UD MODE DO NOT TRUNCATE.

NEW file: rfio/logging.c(1.1)
rfio/logging.c: 1.1 93/11/15 17:08:35 by murali 
date and time created 93/11/15 17:08:35 by murali

NEW file: rfio/logging.h(1.1)
rfio/logging.h: 1.1 93/11/15 17:10:38 by murali 
date and time created 93/11/15 17:10:38 by murali

rfio/lseek.c: 3.3 93/05/12 10:28:08 by acher 
rfio_lseekinbuf() is static.

rfio/open.c: 3.5 93/11/18 17:03:49 by hemmer 
added client logging

rfio/open.c: 3.4 93/09/21 13:22:08 by hemmer 
reset serrno, in case entry not found.

rfio/open.c: 3.3 93/09/17 11:30:12 by acher 
Using rfiosetopt() and rfioreadopt().

rfio/open.c: 3.2 93/09/17 10:07:47 by hemmer 
Use IOBUFSIZ from shift.conf.

rfio/parse.c: 3.6 93/11/02 11:07:34 by acher 
on  SunOs 5.2 , need proper cast for < arguments.

rfio/parse.c: 3.5 93/08/05 14:22:48 by acher 
new argument specifies wether to solve symbolic links or not.

rfio/parse.c: 3.4 93/07/16 09:39:57 by acher 
Symbolic links are solved even if file name is a relative file name.

rfio/parse.c: 3.3 93/04/21 08:10:40 by acher 
Corrected Bug into parse.c: Memory for name_1 should be static.

rfio/parse.c: 3.2 93/04/06 14:47:14 by acher 
Modification made to solve local symbolic links in open or xyopen statements.

NEW file: rfio/pclose.c(1.1)
rfio/pclose.c: 1.1 93/11/17 18:05:55 by acher 
date and time created 93/11/17 18:05:55 by acher

NEW file: rfio/popen.c(1.2)
rfio/popen.c: 1.2 93/11/17 18:10:21 by acher 
One comment modified.

NEW file: rfio/pread.c(1.2)
rfio/pread.c: 1.2 93/11/17 18:09:00 by acher 
One comment modified.

NEW file: rfio/pwrite.c(1.1)
rfio/pwrite.c: 1.1 93/11/17 17:59:42 by acher 
date and time created 93/11/17 17:59:42 by acher

rfio/read.c: 3.5 93/11/18 16:57:09 by hemmer 
add client logging

rfio/read.c: 3.4 93/05/12 10:27:09 by acher 
rfio_preread() is static.

rfio/rfio_calls.c: 3.11 93/11/17 18:28:45 by acher 
Entered popen functionnality.

rfio/rfio_calls.c: 3.10 93/11/02 11:28:35 by acher 
on  SunOs 5.2 , need proper cast for function args, otherwise warnings.

rfio/rfio_calls.c: 3.9 93/09/30 16:19:08 by acher 
converted iov_base pointer to long before unmarshalling.

rfio/rfio_calls.c: 3.8 93/09/29 09:39:16 by acher 
setuid() and setgid() are not enough on RS600 machines !

rfio/rfio_calls.c: 3.7 93/09/21 12:20:02 by acher 
use setgroups only on RS6000 machines

rfio/rfio_calls.c: 3.6 93/09/21 11:59:02 by acher 
setting uid and gid on RS6000 with setgid() and setuid() is not enough.

rfio/rfio_calls.c: 3.5 93/09/07 16:39:30 by acher 
Added rfio_statfs() functionnality.

rfio/rfio_calls.c: 3.4 93/08/05 14:37:37 by acher 
Added rfio_symlink()'s server function srsymlink().

rfio/rfio_fcalls.c: 3.10 93/09/29 09:40:26 by acher 
setuid() and setgid() are not enough on RS600 machines !

rfio/rfio_fcalls.c: 3.9 93/03/10 19:08:16 by acher 
CORRECTED 1 bug which was preventing from getting the debugging display from the switch_XXX() functions into log file of rfiod.

rfio/rfio_fcalls.c: 3.8 93/03/04 16:30:50 by acher 
 OPENINING A FILE IN US MODE OPENS A FILE IN TRUNC MODE IF APPEND WAS NOT SPECIFIED. FOR THE UD MODE , AN OPTION T HAS BEEN ADDED TO ENABLE A TRUNCATE INTO THE FILE OPENING MODE. BY DEFAULT UD MODE DO NOT TRUNCATE.

rfio/rfio_fcalls.c: 3.7 93/02/19 16:25:24 by baud 
definition of entry point names for CRAY must be moved to switch_req.c

rfio/rfio_serv.c: 3.16 93/11/17 18:32:32 by acher 
Entered popen functionality into rfio server.

rfio/rfio_serv.c: 3.15 93/11/02 11:20:36 by acher 
on  SunOs 5.2 , need proper cast for function args, otherwise warnings.

rfio/rfio_serv.c: 3.14 93/09/07 16:33:39 by acher 
Added rfio_statfs() functionnality.

rfio/rfio_serv.c: 3.13 93/08/11 11:52:39 by acher 
Trap SIGHUP on DEC-Alpha machines.

rfio/rfio_serv.c: 3.12 93/08/05 14:41:27 by acher 
Added symlink() functionnality to rfio.

rfio/rfio_serv.c: 3.11 93/05/14 10:34:32 by acher 
Ported to Dec/alpha under OSF

rfio/rfio_serv.c: 3.10 93/02/19 16:27:16 by baud 
add support for SOLARIS

NEW file: rfio/rfstatfs.c(1.3)
rfio/rfstatfs.c: 1.3 93/09/20 15:36:23 by acher 
Include <sys/types.h> for AIX.

NEW file: rfio/setopt.c(1.1)
rfio/setopt.c: 1.1 93/09/17 09:05:01 by acher 
date and time created 93/09/17 09:05:01 by acher

NEW file: rfio/statfs.c(1.1)
rfio/statfs.c: 1.1 93/09/07 16:41:26 by acher 
date and time created 93/09/07 16:41:26 by acher

rfio/switch_req.c: 1.8 93/05/14 10:36:12 by acher 
Ported to Dec/alpha under OSF   

rfio/switch_req.c: 1.7 93/03/10 18:59:43 by acher 
CORRECTED 1 bug which was preventing from getting the debugging display from the switch_XXX() functions into log file. 

rfio/switch_req.c: 1.6 93/03/10 14:53:34 by acher 
Added the truncate mode 

rfio/switch_req.c: 1.5 93/02/19 16:29:49 by baud 
definition of entry point names for CRAY must be moved from rfio_fcalls.c

rfio/switch_req.c: 1.4 93/02/03 18:23:58 by acher 
Corrected a bug for CRAY: an error of typing in name buffer1

NEW file: rfio/symlink.c(1.2)
rfio/symlink.c: 1.2 93/08/10 17:31:25 by hemmer 
Added VMS support (or rather disable it for now on VMS)

rfio/write.c: 3.2 93/11/18 17:04:25 by hemmer 
added client logging

rfio/xyclose.c: 3.7 93/11/02 11:10:07 by acher 
on  SunOs 5.2 , need proper cast for < arguments.

rfio/xyclose.c: 3.6 93/08/03 16:07:48 by hemmer 
added PPU options for Fortran bindings

rfio/xyopen.c: 3.11 93/11/02 11:08:50 by acher 
on  SunOs 5.2 , need proper cast for < arguments.

rfio/xyopen.c: 3.10 93/08/03 16:09:49 by hemmer 
added PPU options for Fortran bindings on HP/UX

rfio/xyopen.c: 3.9 93/03/11 07:15:27 by acher 
Removed interdiction of making a sequential open with the option truncate.

rfio/xyopen.c: 3.8 93/03/10 19:01:59 by acher 
 CORRECTED 1 bug which was preventing from getting the debugging display from the switch_XXX() functions into log file of rfiod.

rfio/xyopen.c: 3.7 93/03/04 16:32:52 by acher 
 OPENINING A FILE IN US MODE OPENS A FILE IN TRUNC MODE IF APPEND WAS NOT SPECIFIED. FOR THE UD MODE , AN OPTION T HAS BEEN ADDED TO ENABLE A TRUNCATE INTO THE FILE OPENING MODE. BY DEFAULT UD MODE DO NOT TRUNCATE.

rfio/xyread.c: 3.8 93/11/02 11:11:22 by acher 
on  SunOs 5.2 , need proper cast for < arguments.

rfio/xyread.c: 3.7 93/08/03 16:08:42 by hemmer 
added PPU options for Fortran bindings

rfio/xyread.c: 3.6 93/03/10 19:04:00 by acher 
 CORRECTED 1 bug which was preventing from getting the debugging display from the switch_XXX() functions into log file of rfiod.

rfio/xywrite.c: 3.8 93/11/02 11:13:13 by acher 
on  SunOs 5.2 , need proper cast for < arguments.

rfio/xywrite.c: 3.7 93/08/03 16:10:48 by hemmer 
 added PPU options for Fortran bindings on HP/UX

rfio/xywrite.c: 3.6 93/03/10 19:06:43 by acher 
CORRECTED 1 bug which was preventing from getting the debugging display from the switch_XXX() functions into log file of rfiod.

NEW file: rtcopy/Imakefile(1.5)
rtcopy/Imakefile: 1.5 93/09/07 16:52:23 by acher 
tpread should not be linked to Ultra due to ULTRA instability.

rtcopy/dktotpF.c: 2.12 93/03/26 14:55:21 by acher 
 Corrected bug:  Modified display of error messages to get them into the rtcopy.err file.

rtcopy/dktotpU.c: 2.12 93/07/23 13:38:53 by acher 
Send adequate message if file has not US fortran format.

rtcopy/dktotpU.c: 2.11 93/03/26 14:50:51 by acher 
 Corrected bug:  Modified display of error messages to get them into the rtcopy.err file.

rtcopy/rtcopy.awk: 2.3 93/08/17 17:09:40 by acher 
status is set to 1 if a non-numeric value is entered.

rtcopy/rtcopy.cray: 2.11 93/02/22 10:49:24 by baud 
use tmsreq instead of sysreq to have automatic retry

rtcopy/rtcopy.shift: 2.21 93/10/15 16:35:53 by acher 
Loop in case there is a driver error on tape ring position.

rtcopy/rtcopy.shift: 2.20 93/08/18 16:25:38 by acher 
When -qn<number> is specified, create <number> files on tape instead of  concataning the files into one.

rtcopy/rtcopy.shift: 2.19 93/06/08 19:01:17 by acher 
Eliminated inconsistency between options -L X and -F F.

rtcopy/rtcopy.shift: 2.18 93/05/24 15:55:08 by acher 
Prevented request with "-b 0" option & checked that "record length <= block size" .

rtcopy/rtcopy.shift: 2.17 93/03/19 18:16:56 by acher 
Corrected 1 bug in script. A character file can be detected on all machines by the test if [ -c file ].

rtcopy/rtcopy.shift: 2.16 93/02/22 10:47:23 by baud 
use tmsreq instead of sysreq to have automatic retry

rtcopy/rtcopy.shift: 2.15 93/02/19 13:21:30 by acher 
The script now checks that the temporary files which have to be created are not already existent on disk and forbidden ion access.

rtcopy/rtcopyd.c: 2.38 93/11/02 11:53:15 by acher 
 On SunOS 5.2, need explicit argument binding, otherwise warnings.

rtcopy/rtcopyd.c: 2.37 93/10/28 16:23:46 by acher 
stdarg's va_start on Silicon Graphics running IRIX 5.X

rtcopy/rtcopyd.c: 2.36 93/09/30 17:06:51 by acher 
Suppressed warning on osf 1 .

rtcopy/rtcopyd.c: 2.35 93/09/30 14:34:06 by acher 
  Ported to IRIX 5.1 which requires stdarg.h inclusion for va_list definition.

rtcopy/rtcopyd.c: 2.34 93/09/18 09:59:42 by acher 
sigvector() on hpux wants an allocated sigvec structure.

rtcopy/rtcopyd.c: 2.33 93/09/15 16:21:30 by acher 
Handling SIGCLD and waiting for childs even in standalone mode, for hpux & AIX 

rtcopy/rtcopyd.c: 2.32 93/08/12 11:35:53 by acher 
when netread() detects that client closed connection, log message.

rtcopy/rtcopyd.c: 2.31 93/08/06 10:10:15 by acher 
comparing the first 2 bytes of buffer "call".

rtcopy/rtcopyd.c: 2.30 93/07/23 10:53:11 by acher 
unmarshall has to be redefined for any supported machine.

rtcopy/rtcopyd.c: 2.29 93/07/16 12:37:20 by acher 
message "request from authorized host ..." only in debug mode.

rtcopy/rtcopyd.c: 2.28 93/06/01 17:42:53 by acher 
Message "user XXX from unauthorized host YYY" instead of "unauthorized user XXX..."

rtcopy/rtcopyd.c: 2.27 93/05/14 15:31:06 by acher 
Ported to Dec alpha under OSF 1.

rtcopy/rtcopyd.c: 2.26 93/05/10 10:46:44 by acher 
Modified daemon so that user connected on tape server does not need to be authorized into the hosts list.

rtcopy/rtcopyd.c: 2.25 93/05/03 15:57:20 by acher 
Corrected bug: In standalone mode on hpux, handling now signal SIGCLD to avoid proliferation of ZOMBIES.

rtcopy/rtcopyd.c: 2.24 93/04/28 15:58:11 by acher 
log file rtcopy.err is now filled bu the function printerr() which opens and closes the log file before and after each write. Avoids that 2 processes overlap their error outputs & enables run time move pf this file.

rtcopy/rtcopyd.c: 2.23 93/04/19 12:33:22 by acher 
Eliminated unnecessary info contained in err file after an info request. Duplicate information is already in log file.

rtcopy/rtcopyd.c: 2.22 93/04/01 08:37:29 by acher 
Daemon transmits now another info to the client: the local tape queue and the number of tapes running. In near future , tpread/tpwrite use this info to choose the best tape server.

rtcopy/rtcopyd.c: 2.21 93/03/24 18:02:47 by acher 
Erased the log information informing that the output error message file is successfully opened.

rtcopy/rtcopyd.c: 2.20 93/02/19 16:36:23 by baud 
add support for SOLARIS

rtcopy/tpio.c: 1.10 93/10/15 16:18:00 by acher 
For sun, return special error code when "permission denied" occurs at write statement on tape. 

rtcopy/tpio.c: 1.9 93/09/13 16:45:16 by baud 
LEOT on AIX gives now (3.2.4) ENXIO instead of ENOSPC

rtcopy/tpio.c: 1.8 93/07/22 16:34:40 by acher 
We should not erase last file unless an error occured after something has been written on tape.

rtcopy/tpread.c: 2.37 93/11/02 11:55:37 by acher 
On SunOS 5.2, > arguments need explicit cast to int.

rtcopy/tpread.c: 2.36 93/10/01 12:31:38 by acher 
sysreq gives info error when TMS is not responding.

rtcopy/tpread.c: 2.35 93/10/01 11:42:55 by acher 
sysreq does not return code 13. When TMS not responding, display TMS message.

rtcopy/tpread.c: 2.34 93/09/27 17:12:01 by hemmer 
Removed :/ check on file path. Doesn't cater for VMS.

rtcopy/tpread.c: 2.33 93/09/17 11:44:33 by acher 
Do not read "NET" entries into rfio_stat() .

rtcopy/tpread.c: 2.32 93/09/16 17:51:11 by acher 
handling sysreq()'s return code 13, and supporting multivolumes efficiently.

rtcopy/tpread.c: 2.31 93/09/08 16:59:36 by acher 
Resolves symbolic links to file systems NFS visible.

rtcopy/tpread.c: 2.30 93/08/25 11:19:28 by acher 
malloc() cannot be redeclared on IRIX5.

rtcopy/tpread.c: 2.29 93/08/13 15:21:08 by acher 
Modified vid checking at client's side: TMS provides the check and returns code. Loop while TMS fails RETRY times.

rtcopy/tpread.c: 2.28 93/07/28 16:19:01 by baud 
replace SYSTEM by GENERIC in TMS QVOL requests

rtcopy/tpread.c: 2.27 93/07/20 17:40:42 by acher 
vsn or vid specification was not supporting multi-volume specifications.

rtcopy/tpread.c: 2.26 93/07/02 11:50:06 by acher 
correction of orthograph syntax.

rtcopy/tpread.c: 2.25 93/06/16 14:31:12 by acher 
Gname was printed with the size specification %d.

rtcopy/tpread.c: 2.24 93/05/26 15:13:33 by acher 
Corrected error concerning sites where tms is unavailable.

rtcopy/tpread.c: 2.23 93/05/25 11:16:42 by acher 
 1- Modified algorithm for the choice of tape server to improve load balancing among servers. 2 - Added several checks on options passed to daemon to avoid mistakes such as: Bad vid or vsn, tpwrite a file empty or a "bad" file.

rtcopy/tpread.c: 2.22 93/05/18 17:15:28 by baud 
change "SYSTEM" to "GENERIC" in QVOL requests

rtcopy/tpread.c: 2.21 93/05/14 11:51:37 by acher 
Ported to Dec/alpha under OSF 1

rtcopy/tpread.c: 2.20 93/04/02 15:40:13 by baud 
add SYSTEM SHIFT to QVOL requests

rtcopy/tpread.c: 2.19 93/03/30 10:33:39 by acher 
Corrected bug: When error is made on server name (either in -S option or in shift.conf) the tpread/tpwrite command selects another server, when available.

rtcopy/tpread.c: 2.18 93/02/24 17:08:51 by baud 
replace ? : operator by an if to avoid compiler crash under hpux 9.0

rtcopy/tpread.c: 2.17 93/02/19 16:37:41 by baud 
add support for SOLARIS

rtcopy/tpread.man: 1.3 93/10/19 13:47:29 by baud 
add option -qu

rtcopy/tptodk.c: 2.3 93/03/26 14:35:34 by acher 
Modified display of error messages to get them into the rtcopy.err file.

rtcopy/tptodk.c: 2.2 93/03/22 19:36:51 by acher 
Handling SIGPIPE message to avoid that tape jobs die without giving an error status.

rtcopy/tptodkF.c: 2.13 93/11/02 17:18:58 by acher 
SunOS 5.2 requires explicit cast for arguments in function signal() .

rtcopy/tptodkF.c: 2.12 93/03/26 14:38:14 by acher 
Corrected bug:  Modified display of error messages to get them into the rtcopy.err file.

rtcopy/tptodkF.c: 2.11 93/03/22 19:41:24 by acher 
 Handling SIGPIPE message to avoid that tape jobs die without giving an error status

rtcopy/tptodkF.c: 2.10 93/02/19 16:40:04 by baud 
fixes version 2.9 when lrecl not specified by user

rtcopy/tptodkU.c: 2.10 93/11/02 17:17:55 by acher 
SunOS 5.2 requires explicit cast for arguments in function signal() .

rtcopy/tptodkU.c: 2.9 93/03/26 14:48:46 by acher 
 Corrected bug:  Modified display of error messages to get them into the rtcopy.err file.

rtcopy/tptodkU.c: 2.8 93/03/22 19:39:45 by acher 
 Handling SIGPIPE message to avoid that tape jobs die without giving an error stus

NEW file: scripts/Imakefile(1.4)
scripts/Imakefile: 1.4 93/09/29 10:42:55 by acher 
Typing error corrected.

NEW file: scripts/assign.alpha_osf(1.1)
scripts/assign.alpha_osf: 1.1 93/09/27 15:37:36 by hemmer 
date and time created 93/09/27 15:37:36 by hemmer

NEW file: scripts/sacquire(1.1)
scripts/sacquire: 1.1 93/09/07 14:00:54 by acher 
date and time created 93/09/07 14:00:54 by acher

NEW file: scripts/sfetch(1.4)
scripts/sfetch: 1.4 93/11/02 12:27:07 by boissat 
Remove log file anyway...

NEW file: scripts/sfetch.man(1.3)
scripts/sfetch.man: 1.3 93/05/12 14:11:29 by acher 
Added the retry on failure paragraph.

NEW file: sysreq/Imakefile(1.4)
sysreq/Imakefile: 1.4 93/08/16 16:48:21 by baud 
suppress -f $(MAKEFILE) on make calls

sysreq/netreq.c: 1.11 93/11/17 18:42:18 by acher 
SOLARIS 5.2 requires explicit casts.

sysreq/sysreq.c: 1.7 93/11/02 11:34:03 by acher 
on  SunOs 5.2 , need proper cast for function args, otherwise warnings.

sysreq/sysreqf.c: 1.14 93/09/29 14:24:30 by hemmer 
added ALPHA/OSF support

sysreq/sysreqf.c: 1.13 93/08/03 16:21:54 by hemmer 
added hpux support

NEW file: tms/Imakefile(1.1)
tms/Imakefile: 1.1 93/02/26 10:57:28 by baud 
date and time created 93/02/26 10:57:28 by baud

tms/checkjobdied.c: 1.6 93/05/27 16:36:18 by baud 
add support for IRIX5 and alpha osf (similar to SOLARIS)

tms/checkjobdied.c: 1.5 93/02/19 17:09:08 by baud 
add support for SOLARIS

NEW file: tms/findpgrp.c(1.2)
tms/findpgrp.c: 1.2 93/05/27 16:36:40 by baud 
add support for IRIX5 and alpha osf (similar to SOLARIS)

NEW file: tms/msg.c(1.1)
tms/msg.c: 1.1 93/03/16 13:28:09 by baud 
date and time created 93/03/16 13:28:09 by baud

tms/send2tmsd.c: 1.8 93/05/27 16:33:16 by baud 
add support for alpha osf

tms/sendrep.c: 1.6 93/05/27 16:32:32 by baud 
add support for alpha osf

tms/tms.h: 1.6 93/02/19 17:16:38 by baud 
define MAXHOSTNAMELEN for SOLARIS

tms/tms.h: 1.5 93/02/10 17:18:41 by baud 
Correct definition of MAXPATH when already defined (AIX)

tms/tmsdaemon.c: 1.19 93/05/27 16:34:16 by baud 
add support for alpha osf

tms/tmsdaemon.c: 1.18 93/03/18 11:10:31 by baud 
fix for daemon crashing was still incomplete

tms/tmsdaemon.c: 1.17 93/02/25 11:07:04 by baud 
daemon was crashing if buffer size = multiple of req size and buffer was full (previous fix was insufficient)

tms/tmsdaemon.c: 1.16 93/02/19 17:17:53 by baud 
add support for SOLARIS

tms/tmslogit.c: 1.3 93/05/27 16:31:20 by baud 
use varargs because of alpha osf (pointers are 64 bits, int are 32 bits)

tms/tsttmsexit.c: 1.4 93/02/19 17:19:43 by baud 
use findpgrp instead of getpgrp

NEW file: dpm/Imakefile(1.1)
dpm/Imakefile: 1.1 93/02/19 15:42:37 by baud 
date and time created 93/02/19 15:42:37 by baud

NEW file: dpm/h/Imakefile(1.1)
dpm/h/Imakefile: 1.1 93/02/19 15:54:37 by baud 
date and time created 93/02/19 15:54:37 by baud

dpm/h/config.h: 3.3 93/05/28 11:47:38 by acher 
Ported to osf on Alpha-Dec .

dpm/h/dpmutil.h: 3.9 93/05/07 10:06:28 by acher 
 Ported to Solaris. Solved conflict between index_t type name of solaris and the  dpm's type index_t.

dpm/h/flock.h: 3.2 93/05/07 09:30:58 by acher 
Portability on SOLARIS done

dpm/h/optutil.h: 3.3 93/05/12 10:56:49 by acher 
Corrected several function unconsistent definitions.

dpm/h/optutil.h: 3.2 93/05/07 09:43:31 by acher 
ported to Solaris: Solved conflict between solaris's macro OPTVAL and dpm's constant OPTVAL.

dpm/h/parser.h: 3.2 93/05/07 09:33:26 by acher 
Portability on SOLARIS done: Conflict with type id_t of system V Solaris solved.

dpm/h/sfgc2.h: 1.11 93/10/28 17:45:32 by acher 
Ported to IRIX5.

dpm/h/sfgc2.h: 1.10 93/05/07 09:38:30 by acher 
 Portability to Solaris done: conflict with type name index_t in Solaris solved.

dpm/h/strutil.h: 3.2 93/08/11 18:24:51 by acher 
Port to solaris 2.1 ansi C compiler.

dpm/h/table.h: 3.5 93/05/07 09:38:18 by acher 
 Portability to Solaris done: conflict with type name index_t in Solaris solved.

NEW file: dpm/util/Imakefile(1.2)
dpm/util/Imakefile: 1.2 93/06/08 18:32:00 by acher 
link with NIS on sgi if requested in site.def.

dpm/util/dump.c: 3.2 93/11/02 16:52:08 by acher 
SunOS 5.2 requires explicit cast for > operation arguments.

dpm/util/flock.c: 3.2 93/05/07 09:42:31 by acher 
ported to Solaris.

dpm/util/optutil.c: 3.5 93/11/02 16:48:55 by acher 
SunOS 5.2 requires explicit cast for arguments of functions.

dpm/util/optutil.c: 3.4 93/05/07 09:30:03 by acher 
Portability on SOLARIS done

dpm/util/pktutil.c: 3.5 93/05/28 09:43:41 by acher 
Ported to alpha-DEC under osf.

dpm/util/pktutil.c: 3.4 93/05/12 10:18:50 by acher 
Made portable for IRIX5

dpm/util/pktutil.c: 3.3 93/05/07 09:32:08 by acher 
Portability on SOLARIS done

dpm/util/random.c: 3.2 93/05/28 09:39:51 by acher 
Ported to alpha-DEC under osf.

dpm/util/sockutil.c: 3.5 93/07/12 14:14:55 by acher 
added casts between struct sockaddr and struct sockadd_in .

dpm/util/sockutil.c: 3.4 93/05/07 09:31:34 by acher 
Portability on SOLARIS done

dpm/util/strutil.c: 3.3 93/11/02 16:50:36 by acher 
SunOS 5.2 requires explicit cast for arguments of functions.

dpm/util/strutil.c: 3.2 93/05/28 09:46:30 by acher 
Ported to alpha-DEC under osf & solved conflict of Macro name between osf & dpm software.

NEW file: dpm/parser/Imakefile(1.3)
dpm/parser/Imakefile: 1.3 93/06/08 18:34:14 by acher 
Link with NIS if requested in site.def

dpm/parser/command.c: 3.7 93/05/07 10:05:53 by acher 
 Ported to Solaris. Solved conflict between index_t type name of solaris and the dpm's type index_t.

dpm/parser/config.c: 3.9 93/11/02 16:54:35 by acher 
SunOS 5.2 requires explicit cast for > operation arguments.

dpm/parser/config.c: 3.8 93/05/07 10:04:58 by acher 
Ported to Solaris.

dpm/parser/data.c: 3.7 93/05/28 09:35:56 by acher 
Ported to alpha-DEC under osf.

dpm/parser/data.c: 3.6 93/05/12 09:45:02 by acher 
Conflict between index_t in dpm & index_t in SOLARIS or IRIX5

dpm/parser/dpm.lex: 3.5 93/05/07 09:32:50 by acher 
Portability on SOLARIS done: Conflict with type id_t of system V Solaris solved.

dpm/parser/dpm.yacc: 3.8 93/05/07 10:04:17 by acher 
Ported to Solaris: Solved conflict between solaris' type id_t and dpm's id_t.

dpm/parser/getconfent.c: 3.2 93/05/12 09:43:02 by acher 
Solved conflict between SOLARIS & IRIX5's index_t and dpm's.

dpm/parser/server.c: 3.5 93/07/12 14:13:19 by acher 
added casts between struct sockaddr and struct sockadd_in .

dpm/parser/sfmakem.c: 3.5 93/08/24 12:42:40 by acher 
Added signal.h 

dpm/parser/sfmakem.c: 3.4 93/08/19 12:18:57 by acher 
Handled SIGHUP for daemon on HPUX or DEC-alpha machines

dpm/parser/sfmakem.c: 3.3 93/05/07 09:43:58 by acher 
 ported to Solaris: Solved conflict between solaris's macro OPTVAL and dpm's constant OPTVAL

dpm/parser/sfsyntax.man: 3.6 93/08/20 11:32:14 by acher 
Corrections for REMOTESFSH and WLOCK tokens

dpm/parser/sfsyntax.man: 3.5 93/08/19 09:40:28 by acher 
Added examples and explanations.

dpm/parser/table.c: 3.8 93/05/07 09:34:58 by acher 
Portability to Solaris done: conflict with type name index_t in Solaris solved.

NEW file: dpm/dpm/Imakefile(1.3)
dpm/dpm/Imakefile: 1.3 93/08/19 10:57:47 by acher 
linking with lsun for sgi if NIS available.

dpm/dpm/disk.c: 3.9 93/07/12 12:35:31 by acher 
Corrected statfs() call for SOLARIS. Need to call statvfs() now.

dpm/dpm/disk.c: 3.8 93/07/09 17:42:57 by acher 
On alpha-OSF machines, block size field in struct statfs is f_fsize.

dpm/dpm/disk.c: 3.7 93/05/28 09:33:48 by acher 
Ported to Alpha-Dec under osf.

dpm/dpm/disk.c: 3.6 93/05/07 09:41:10 by acher 
 Portability to Solaris done:Replaced index() bu strchr() and rindex() by strrchr().

dpm/dpm/dpmutil.c: 3.15 93/07/12 18:32:09 by acher 
Corrected display when error is committed.

dpm/dpm/dpmutil.c: 3.14 93/05/07 09:39:11 by acher 
 Portability to Solaris done: conflict with type name index_t in Solaris solved.

dpm/dpm/sfdpmd.c: 3.8 93/11/02 17:01:13 by acher 
SunOS 5.2 requires specific case for function args (bind(), signal()).

dpm/dpm/sfdpmd.c: 3.7 93/10/20 18:18:28 by acher 
Fixed warning on SYS V IRIX 5.1

dpm/dpm/sfdpmd.c: 3.6 93/08/11 12:41:43 by acher 
Trap SIGHUP on hpux and Dec-Alpha machines.

dpm/dpm/sfdpmd.c: 3.5 93/05/07 09:56:22 by acher 
Ported to Solaris.

dpm/dpm/sfdpmd.man: 3.2 93/08/20 11:52:48 by acher 
functionality error corrected about sfdpmd

dpm/dpm/sfgc.c: 1.41 93/11/02 17:11:27 by acher 
SunOS 5.2 requires explicit cast for function args ( ">", signal() ).

dpm/dpm/sfgc.c: 1.40 93/10/28 16:34:17 by acher 
Ported to sysV like IRIX 5.X systems.

dpm/dpm/sfgc.c: 1.39 93/09/20 12:10:57 by acher 
Ultrix does not like =-.

dpm/dpm/sfgc.c: 1.38 93/07/12 18:34:21 by acher 
variable reply was returned without initialization when user was not authorized to use sfgc command.

dpm/dpm/sfgc.c: 1.37 93/06/08 19:20:28 by acher 
Access time should be always greater than modification time.

dpm/dpm/sfgc.c: 1.36 93/05/12 09:52:59 by acher 
Conflict between index_t in dpm & index_t in SOLARIS or IRIX5

dpm/dpm/sfgc.c: 1.35 93/05/07 09:45:02 by acher 
ported to Solaris

NEW file: dpm/dpm/sfgc.man(1.4)
dpm/dpm/sfgc.man: 1.4 93/11/03 14:40:38 by acher 
Typing error encountered.

dpm/dpm/sfgc_old.c: 3.10 93/05/12 09:55:00 by acher 
Conflict between index_t in dpm & index_t in SOLARIS or IRIX5

dpm/dpm/sfrpc.c: 3.5 93/11/02 16:57:03 by acher 
SunOS 5.2 requires explicit cast for function args.

dpm/dpm/sfsh.c: 3.7 93/11/02 16:58:30 by acher 
SunOS 5.2 requires explicit cast for > operation arguments.

dpm/dpm/sfsh.c: 3.6 93/07/12 12:40:28 by acher 
function definition forgotten.

dpm/dpm/tmps.c: 3.3 93/05/07 09:42:02 by acher 
Corrected 1 error in usage of function open() & ported to Solaris.

NEW file: commands/Imakefile(1.1)
commands/Imakefile: 1.1 93/02/26 10:58:46 by baud 
date and time created 93/02/26 10:58:46 by baud

commands/newacct.c: 1.2 93/11/17 19:20:52 by acher 
SOlaris 5.2 requires explicit casts for '>' args.

NEW file: imake/Makefile.ini(1.1)
imake/Makefile.ini: 1.1 93/02/22 10:56:55 by baud 
date and time created 93/02/22 10:56:55 by baud

NEW file: imake/ccimake.c(1.1)
imake/ccimake.c: 1.1 93/02/22 10:57:34 by baud 
date and time created 93/02/22 10:57:34 by baud

NEW file: imake/imake.c(1.1)
imake/imake.c: 1.1 93/02/22 10:57:44 by baud 
date and time created 93/02/22 10:57:44 by baud

NEW file: imake/imakemdep.h(1.2)
imake/imakemdep.h: 1.2 93/05/27 17:07:11 by baud 
add support for IRIX5 and alpha osf

NEW file: config/Imake.rules(1.1)
config/Imake.rules: 1.1 93/02/26 10:40:31 by baud 
date and time created 93/02/26 10:40:31 by baud

NEW file: config/Imake.tmpl(1.2)
config/Imake.tmpl: 1.2 93/05/27 17:28:14 by baud 
uses sun.cf for SOLARIS, sgi.cf for IRIX5, add an include for alpha_osf.cf

NEW file: config/Library.tmpl(1.3)
config/Library.tmpl: 1.3 93/08/20 08:38:59 by baud 
Cleanup + BuildRfio YES implies BuildCommon YES

NEW file: config/Project.tmpl(1.4)
config/Project.tmpl: 1.4 93/08/20 08:35:45 by baud 
BuildRfio YES implies BuildCommon YES

NEW file: config/aix.cf(1.1)
config/aix.cf: 1.1 93/02/25 16:35:01 by baud 
date and time created 93/02/25 16:35:01 by baud

NEW file: config/aixesa.cf(1.1)
config/aixesa.cf: 1.1 93/02/19 14:51:53 by baud 
date and time created 93/02/19 14:51:53 by baud

NEW file: config/alpha_osf.cf(1.1)
config/alpha_osf.cf: 1.1 93/05/27 17:24:30 by baud 
date and time created 93/05/27 17:24:30 by baud

NEW file: config/apollo.cf(1.1)
config/apollo.cf: 1.1 93/02/25 16:35:19 by baud 
date and time created 93/02/25 16:35:19 by baud

NEW file: config/cray.cf(1.1)
config/cray.cf: 1.1 93/02/25 16:35:34 by baud 
date and time created 93/02/25 16:35:34 by baud

NEW file: config/hp.cf(1.2)
config/hp.cf: 1.2 93/08/03 16:23:21 by hemmer 
added ppu preprocesors default

NEW file: config/sgi.cf(1.3)
config/sgi.cf: 1.3 93/09/30 15:07:00 by acher 
 variable RM was not defined for IRIX5.

NEW file: config/site.def(1.3)
config/site.def: 1.3 93/11/18 17:28:51 by murali 
added RFIO client logging compile time option

NEW file: config/sun.cf(1.2)
config/sun.cf: 1.2 93/05/27 17:16:50 by baud 
integrates SOLARIS into sun.cf

NEW file: config/ultrix.cf(1.1)
config/ultrix.cf: 1.1 93/02/25 16:36:05 by baud 
date and time created 93/02/25 16:36:05 by baud

DELETED file : ./aix.mk (1.2)
DELETED file : ./aixesa.mk (1.1)
DELETED file : ./apollo.mk (1.5)
DELETED file : ./cray.mk (1.12)
DELETED file : ./hp.mk (1.1)
DELETED file : ./sgi.mk (1.13)
DELETED file : ./shift.mk (1.14)
DELETED file : ./sun.mk (1.9)
DELETED file : ./ultrix.mk (1.6)
DELETED file : common/aix.mk (1.2)
DELETED file : common/aixesa.mk (1.2)
DELETED file : common/apollo.mk (1.1)
DELETED file : common/common.mk (1.13)
DELETED file : common/cray.mk (1.16)
DELETED file : common/hp.mk (1.2)
DELETED file : common/sgi.mk (1.11)
DELETED file : common/sun.mk (1.9)
DELETED file : common/ultrix.mk (1.4)
DELETED file : examples/aix.mk (1.1)
DELETED file : examples/aixesa.mk (1.1)
DELETED file : examples/apollo.mk (1.2)
DELETED file : examples/cray.mk (1.6)
DELETED file : examples/examples.mk (1.4)
DELETED file : examples/hp.mk (1.1)
DELETED file : examples/sgi.mk (1.7)
DELETED file : examples/sun.mk (1.2)
DELETED file : examples/ultrix.mk (1.2)
DELETED file : h/aix.mk (1.1)
DELETED file : h/aixesa.mk (1.1)
DELETED file : h/apollo.mk (1.1)
DELETED file : h/cray.mk (1.1)
DELETED file : h/h.mk (1.5)
DELETED file : h/hp.mk (1.1)
DELETED file : h/sgi.mk (1.1)
DELETED file : h/sun.mk (1.1)
DELETED file : h/ultrix.mk (1.1)
DELETED file : lib/aix.mk (1.1)
DELETED file : lib/aixesa.mk (1.1)
DELETED file : lib/apollo.mk (1.1)
DELETED file : lib/cray.mk (1.5)
DELETED file : lib/hp.mk (1.1)
DELETED file : lib/lib.mk (1.9)
DELETED file : lib/sgi.mk (1.8)
DELETED file : lib/sun.mk (1.7)
DELETED file : lib/ultrix.mk (1.4)
DELETED file : msg/aix.mk (1.1)
DELETED file : msg/aixesa.mk (1.1)
DELETED file : msg/apollo.mk (1.3)
DELETED file : msg/cray.mk (1.2)
DELETED file : msg/hp.mk (1.1)
DELETED file : msg/msg.mk (1.9)
DELETED file : msg/sgi.mk (1.8)
DELETED file : msg/sun.mk (1.7)
DELETED file : msg/ultrix.mk (1.3)
DELETED file : tape/aix.mk (1.1)
DELETED file : tape/aixesa.mk (1.1)
DELETED file : tape/apollo.mk (1.4)
DELETED file : tape/cray.mk (1.4)
DELETED file : tape/hp.mk (1.2)
DELETED file : tape/sgi.mk (1.7)
DELETED file : tape/sun.mk (1.6)
DELETED file : tape/tape.mk (1.17)
DELETED file : tape/ultrix.mk (1.6)
DELETED file : tape/usrtplogit.c (1.2)
DELETED file : rfio/aix.mk (1.2)
DELETED file : rfio/aixesa.mk (1.2)
DELETED file : rfio/apollo.mk (3.3)
DELETED file : rfio/cray.mk (3.2)
DELETED file : rfio/hp.mk (3.2)
DELETED file : rfio/rfio.mk (3.7)
DELETED file : rfio/sgi.mk (3.2)
DELETED file : rfio/sun.mk (3.2)
DELETED file : rfio/ultrix.mk (3.2)
DELETED file : rtcopy/aix.mk (1.2)
DELETED file : rtcopy/aixesa.mk (1.2)
DELETED file : rtcopy/apollo.mk (2.3)
DELETED file : rtcopy/cray.mk (2.3)
DELETED file : rtcopy/hp.mk (1.4)
DELETED file : rtcopy/rtcopy.mk (2.14)
DELETED file : rtcopy/sgi.mk (2.3)
DELETED file : rtcopy/sun.mk (2.4)
DELETED file : rtcopy/ultrix.mk (2.2)
DELETED file : scripts/aix.mk (1.2)
DELETED file : scripts/aixesa.mk (1.2)
DELETED file : scripts/apollo.mk (1.3)
DELETED file : scripts/cray.mk (1.6)
DELETED file : scripts/hp.mk (1.3)
DELETED file : scripts/scripts.mk (1.6)
DELETED file : scripts/sgi.mk (1.6)
DELETED file : scripts/sun.mk (1.5)
DELETED file : scripts/ultrix.mk (1.3)
DELETED file : sysreq/aix.mk (1.1)
DELETED file : sysreq/aixesa.mk (1.1)
DELETED file : sysreq/apollo.mk (1.3)
DELETED file : sysreq/cray.mk (1.9)
DELETED file : sysreq/hp.mk (1.2)
DELETED file : sysreq/sgi.mk (1.8)
DELETED file : sysreq/sun.mk (1.5)
DELETED file : sysreq/sysreq.mk (1.8)
DELETED file : sysreq/ultrix.mk (1.2)
DELETED file : tms/aix.mk (1.1)
DELETED file : tms/aixesa.mk (1.1)
DELETED file : tms/apollo.mk (1.2)
DELETED file : tms/cray.mk (1.1)
DELETED file : tms/hp.mk (1.1)
DELETED file : tms/sgi.mk (1.4)
DELETED file : tms/sun.mk (1.5)
DELETED file : tms/tms.mk (1.5)
DELETED file : tms/ultrix.mk (1.4)
DELETED file : util/aix.mk (1.2)
DELETED file : util/aixesa.mk (1.1)
DELETED file : util/apollo.mk (1.3)
DELETED file : util/cray.mk (1.2)
DELETED file : util/hp.mk (1.1)
DELETED file : util/sgi.mk (1.3)
DELETED file : util/sun.mk (1.2)
DELETED file : util/ultrix.mk (1.2)
DELETED file : util/util.mk (1.5)
DELETED file : dpm/aix.mk (3.1)
DELETED file : dpm/aixesa.mk (1.2)
DELETED file : dpm/apollo.mk (3.2)
DELETED file : dpm/cray.mk (1.2)
DELETED file : dpm/dpm.mk (3.6)
DELETED file : dpm/hp.mk (3.1)
DELETED file : dpm/sgi.mk (3.2)
DELETED file : dpm/sun.mk (1.3.3.1)
DELETED file : dpm/ultrix.mk (3.2)
DELETED file : dpm/h/aix.mk (3.2)
DELETED file : dpm/h/aixesa.mk (1.1)
DELETED file : dpm/h/apollo.mk (3.2)
DELETED file : dpm/h/cray.mk (1.1)
DELETED file : dpm/h/h.mk (3.9)
DELETED file : dpm/h/hp.mk (3.2)
DELETED file : dpm/h/sgi.mk (3.2)
DELETED file : dpm/h/sun.mk (3.2)
DELETED file : dpm/h/ultrix.mk (3.2)
DELETED file : dpm/util/aix.mk (3.2)
DELETED file : dpm/util/aixesa.mk (1.1)
DELETED file : dpm/util/apollo.mk (3.2)
DELETED file : dpm/util/cray.mk (1.1)
DELETED file : dpm/util/hp.mk (3.2)
DELETED file : dpm/util/sgi.mk (3.2)
DELETED file : dpm/util/sun.mk (3.2)
DELETED file : dpm/util/ultrix.mk (3.2)
DELETED file : dpm/util/util.mk (3.4)
DELETED file : dpm/parser/aix.mk (3.2)
DELETED file : dpm/parser/aixesa.mk (1.1)
DELETED file : dpm/parser/apollo.mk (3.2)
DELETED file : dpm/parser/cray.mk (3.2)
DELETED file : dpm/parser/hp.mk (3.2)
DELETED file : dpm/parser/parser.mk (3.5)
DELETED file : dpm/parser/sgi.mk (3.2)
DELETED file : dpm/parser/sun.mk (3.2)
DELETED file : dpm/parser/ultrix.mk (3.2)
DELETED file : dpm/dpm/aix.mk (3.2)
DELETED file : dpm/dpm/aixesa.mk (1.1)
DELETED file : dpm/dpm/apollo.mk (3.2)
DELETED file : dpm/dpm/cray.mk (1.1)
DELETED file : dpm/dpm/dpm.mk (3.12)
DELETED file : dpm/dpm/hp.mk (3.2)
DELETED file : dpm/dpm/sgi.mk (3.2)
DELETED file : dpm/dpm/sun.mk (3.2)
DELETED file : dpm/dpm/ultrix.mk (3.2)
************************ VERSION 1.3.9 *****************************
NEW file: doc/europen91.ms(1.1)
doc/europen91.ms: 1.1 93/01/15 14:18:01 by hemmer 
date and time created 93/01/15 14:18:01 by hemmer

tape/tape.h: 1.25 93/01/28 09:38:34 by baud 
increases the number of tape users to 16

tape/tpdaemon.c: 1.36 93/01/08 15:04:48 by baud 
logs the exit status of the children mounttape and unloadtps

tape/tpmnt.man: 1.8 93/01/20 15:12:37 by baud 
label info is saved in .tplabel even if tape mounted ring out

rfio/fio.c: 1.6 93/01/26 12:32:46 by acher 
 Corrected bug when opening file in fortran: When not owner of the file to be opened, the file is opened in read only mode.

rfio/rfio_calls.c: 3.3 93/01/21 18:25:38 by acher 
Modified srread(),  srreadahead(), srwrite() to correct statistics evaluation so that rfio_lseek() calls are taken into account in daemon log file.

rtcopy/dktotpF.c: 2.11 93/01/08 12:21:43 by baud 
add blocking feature: blksize may be a multiple of lrecl

rtcopy/rtcopy.mk: 2.14 93/01/07 11:11:44 by baud 
uses cp instead of ln, because hpux make considers same date as out of date

rtcopy/rtcopy.mk: 2.13 93/01/06 11:44:15 by root 
copy rather than link in BIN.

rtcopy/rtcopyd.c: 2.19 93/01/12 09:18:48 by acher 
Modified output to error file "msglog" so that only error messages sent to userare traped and saved.

rtcopy/rtcopyd.c: 2.18 93/01/06 18:28:08 by acher 
In standalone mode fclose for msglog is added if fork fails. Otherwise msglog is closed when daemon finishes.

rtcopy/rtcopyd.man: 1.3 93/01/21 12:08:12 by hemmer 
The SHIFT Reference manual is not an author.

rtcopy/tpio.c: 1.7 93/01/12 09:22:18 by acher 
Modified all error messages by changing character "-" to "!", so that filter in rtcopyd.c can detect between error messages and non-error messages.

rtcopy/tpio.c: 1.6 92/12/22 11:41:17 by baud 
print erreg if EIO for read operations

rtcopy/tpread.man: 1.2 93/01/08 15:25:07 by baud 
blocks on tape are "blocksize" (-b) long and not necessarily "length" (-L) long (possible blocking)

rtcopy/tptodkF.c: 2.9 93/01/08 12:23:09 by baud 
add blocking feature: blksize may be a multiple of lrecl

scripts/hp.mk: 1.3 93/01/07 11:09:07 by baud 
uses cp instead of ln, because hpux make considers same date as out of date

DELETED file : rtcopy/dktotp.f (2.1)
DELETED file : rtcopy/label.c (2.9)
DELETED file : rtcopy/tptodk.f (2.1)
************************ VERSION 1.3.8 *****************************
common/log.c: 1.8 92/12/21 11:58:31 by hemmer 
useless perror, causing invalid message (errno) for syslog.

msg/msgdaemon.c: 1.10 92/12/21 18:02:45 by hemmer 
uses syslog to report noterm() failures & exits.

msg/term.c: 1.7 92/12/21 18:06:26 by hemmer 
autofork for all systems now 
perror not used anymore as terminal was not associated 
noterm() is int and report failures, does not exit anymore 
workaround to SGI 4.0.5 close() bug.

tape/tape.h: 1.24 92/12/18 16:47:08 by baud 
suppress warning message on AIX for MAXPATH defined in <sys/param.h> and redefined by tape.h

rfio/rfio_serv.c: 3.9 92/12/22 09:50:41 by acher 
Removed redefinition warnings for constants from sys/termio.h for sun.

rfio/rfio_serv.c: 3.8 92/12/21 12:00:02 by hemmer 
autofork when started with -s.

rtcopy/aix.mk: 1.2 92/12/21 14:44:37 by hemmer 
install now correctly, even if targets don't exist

rtcopy/aixesa.mk: 1.2 92/12/21 14:44:38 by hemmer 
install now correctly, even if targets don't exist

rtcopy/apollo.mk: 2.3 92/12/21 14:44:39 by hemmer 
install now correctly, even if targets don't exist

rtcopy/cray.mk: 2.3 92/12/21 14:44:40 by hemmer 
install now correctly, even if targets don't exist

rtcopy/hp.mk: 1.4 92/12/21 14:44:41 by hemmer 
install now correctly, even if targets don't exist

rtcopy/rtcopy.h: 2.5 92/12/18 17:36:52 by acher 
constant HOSTNOTAUTH's value changed to 10

rtcopy/rtcopy.h: 2.4 92/12/17 17:44:45 by acher 
Added authorization check for info request

rtcopy/rtcopy.mk: 2.12 92/12/21 14:46:30 by hemmer 
install now correctly, even if targets don't exist

rtcopy/rtcopyd.c: 2.17 92/12/22 09:36:34 by hemmer 
Kept copy of all error messages sent to the users. 
Modified clientlog() to keep such trace of error messages. 
Checked for authorization in info request function getinfo().

rtcopy/rtcopyd.c: 2.16 92/12/17 17:42:43 by acher 
Tuned the display of error if !authorized

rtcopy/rtcopyd.c: 2.15 92/12/17 14:35:46 by acher 
Authorizarion is even checked for info requests.

rtcopy/rtcopyd.c: 2.14 92/12/16 16:28:40 by acher 
Added the carbon copy file MSGLOG in case of daemons started by INETD.

rtcopy/rtcopyd.man: 1.2 92/12/21 12:10:37 by hemmer 
updated for rtcopy.hosts and other.

rtcopy/sgi.mk: 2.3 92/12/21 14:44:42 by hemmer 
install now correctly, even if targets don't exist

rtcopy/sun.mk: 2.4 92/12/21 14:44:43 by hemmer 
install now correctly, even if targets don't exist

rtcopy/tpread.c: 2.16 92/12/17 17:45:25 by acher 
 Added authorization check for info request

rtcopy/ultrix.mk: 2.2 92/12/21 14:44:44 by hemmer 
install now correctly, even if targets don't exist

scripts/aix.mk: 1.2 92/12/21 15:05:50 by hemmer 
install now correctly, even if targets don't exist

scripts/aixesa.mk: 1.2 92/12/21 15:05:51 by hemmer 
install now correctly, even if targets don't exist

scripts/apollo.mk: 1.3 92/12/21 15:05:48 by hemmer 
install now correctly, even if targets don't exist

NEW file: scripts/assign.hp(1.1)
scripts/assign.hp: 1.1 92/12/21 14:57:16 by hemmer 
date and time created 92/12/21 14:57:16 by hemmer

scripts/cray.mk: 1.6 92/12/21 14:57:06 by hemmer 
updated copyright notice

scripts/hp.mk: 1.2 92/12/21 15:05:49 by hemmer 
install now correctly, even if targets don't exist

scripts/scripts.mk: 1.6 92/12/21 15:05:47 by hemmer 
install now correctly, even if targets don't exist

scripts/sgi.mk: 1.6 92/12/21 15:05:46 by hemmer 
install now correctly, even if targets don't exist

scripts/sun.mk: 1.5 92/12/21 15:05:46 by hemmer 
install now correctly, even if targets don't exist

scripts/ultrix.mk: 1.3 92/12/21 15:06:05 by hemmer 
install now correctly, even if targets don't exist

DELETED file : util/make/ar.c (1.1)
DELETED file : util/make/arscan.c (1.1)
DELETED file : util/make/arscan.c.orig (1.1)
DELETED file : util/make/commands.c (1.1)
DELETED file : util/make/commands.h (1.1)
DELETED file : util/make/default.c (1.1)
DELETED file : util/make/dep.h (1.1)
DELETED file : util/make/dir.c (1.1)
DELETED file : util/make/default.c.orig (1.1)
DELETED file : util/make/expand.c (1.1)
DELETED file : util/make/file.c (1.1)
DELETED file : util/make/file.h (1.1)
DELETED file : util/make/function.c (1.1)
DELETED file : util/make/gpl.texinfo (1.1)
DELETED file : util/make/implicit.c (1.1)
DELETED file : util/make/job.c (1.1)
DELETED file : util/make/job.h (1.1)
DELETED file : util/make/load.c (1.1)
DELETED file : util/make/main.c (1.1)
DELETED file : util/make/make.aux (1.1)
DELETED file : util/make/make.cp (1.1)
DELETED file : util/make/make.cps (1.1)
DELETED file : util/make/tags (1.1)
DELETED file : util/make/make.fn (1.1)
DELETED file : util/make/make.fns (1.1)
DELETED file : util/make/make.h (1.1)
DELETED file : util/make/make.h.orig (1.1)
DELETED file : util/make/make.ky (1.1)
DELETED file : util/make/make.kys (1.1)
DELETED file : util/make/make.man (1.1)
DELETED file : util/make/make.pg (1.1)
DELETED file : util/make/make.pgs (1.1)
DELETED file : util/make/make.texinfo (1.1)
DELETED file : util/make/make.toc (1.1)
DELETED file : util/make/make.tp (1.1)
DELETED file : util/make/make.tps (1.1)
DELETED file : util/make/make.vr (1.1)
DELETED file : util/make/make.vrs (1.1)
DELETED file : util/make/misc.c (1.1)
DELETED file : util/make/read.c (1.1)
DELETED file : util/make/remake.c (1.1)
DELETED file : util/make/remote-stub.c (1.1)
DELETED file : util/make/remote.c (1.1)
DELETED file : util/make/remote-cstms.c (1.1)
DELETED file : util/make/rule.c (1.1)
DELETED file : util/make/rule.h (1.1)
DELETED file : util/make/texinfo.tex (1.1)
DELETED file : util/make/variable.c (1.1)
DELETED file : util/make/variable.h (1.1)
DELETED file : util/make/version.c (1.1)
DELETED file : util/make/vpath.c (1.1)
DELETED file : util/make/CHANGES (1.1)
DELETED file : util/make/COPYING (1.1)
DELETED file : util/make/ChangeLog (1.1)
DELETED file : util/make/Makefile (1.1)
DELETED file : util/make/Makefile.orig (1.1)
DELETED file : util/make/README (1.1)
DELETED file : util/make/TAGS (1.1)
DELETED file : util/make/glob/COPYING.LIB (1.1)
DELETED file : util/make/glob/Makefile (1.1)
DELETED file : util/make/glob/fnmatch.c (1.1)
DELETED file : util/make/glob/fnmatch.h (1.1)
DELETED file : util/make/glob/glob.c (1.1)
DELETED file : util/make/glob/glob.h (1.1)
************************ VERSION 1.3.7 *****************************
msg/msgd.c: 1.9 92/11/30 16:01:16 by baud 
Change the request number format to five digits

rfio/rfio_fcalls.c: 3.6 92/11/30 16:18:38 by acher 
Merged the code part that calls the fio.c functions

rfio/xyclose.c: 3.5 92/11/30 16:21:59 by acher 
 Merged the code part that calls the fio.c functions

rfio/xyopen.c: 3.6 92/11/30 16:19:29 by acher 
 Merged the code part that calls the fio.c functions

rfio/xyread.c: 3.5 92/11/30 16:21:08 by acher 
 Merged the code part that calls the fio.c functions

rfio/xywrite.c: 3.5 92/11/30 16:20:24 by acher 
 Merged the code part that calls the fio.c functions

rfio/apollo.mk: 3.3 92/12/09 09:35:06 by acher 


rfio/rfio.mk: 3.7 92/11/30 16:23:02 by acher 
 Merged the code part that calls the fio.c functions

rfio/fio.c: 1.5 92/12/07 18:51:34 by acher 
Removed a bug fatal to tape functions...

rfio/switch_req.c: 1.3 92/12/07 18:48:48 by acher 
Removed the 'A'ppend bug in usf_open().

rtcopy/rtcopyd.c: 2.13 92/12/08 18:07:38 by acher 
Handled signal SIGCLD to avoid Zombies & Created checking of host name with file specified in var AUTH_HOSTS defined in makefile

rtcopy/rtcopy.mk: 2.11 92/12/09 10:56:31 by acher 
File modified to specify log file with variables.

rtcopy/rtcopy.mk: 2.10 92/12/08 18:08:44 by acher 
Defined Macro AUTH_HOST in pre processing time.

tms/tmsactive.c: 1.4 92/12/09 11:00:57 by baud 
new TMS wants HOSTCMD commands be prefixed by CP

************************ VERSION 1.3.6 *****************************
rfio/fio.c: 1.4 92/11/26 18:00:22 by hemmer 
All source must have id keywords !

rfio/fio.c: 1.3 92/11/25 14:21:50 by acher 
Coorected the Bug detected due to EOF not detected in 'U' mode

NEW file: rfio/switch_req.c(1.2)
rfio/switch_req.c: 1.2 92/11/20 09:30:08 by acher 
Added sccs id

rtcopy/rtcopy.cray: 2.10 92/11/25 15:31:14 by baud 
add option -qu

rtcopy/tpio.c: 1.5 92/11/26 10:09:22 by baud 
add missing argument in one call to trerror

rtcopy/tpio.c: 1.4 92/11/25 11:25:53 by baud 
print erreg and delete current tape file if write error

rtcopy/tpread.c: 2.15 92/11/25 14:16:19 by hemmer 
useless assignment.

sysreq/netreq.c: 1.10 92/11/09 17:34:12 by hemmer 
Correct failing TRACE() code.

tms/tmsdaemon.c: 1.15 92/11/10 12:13:43 by baud 
override SYS in MOUNT COMPLETE (MOUNT PENDING can be absent)

dpm/h/sfgc2.h: 1.9 92/11/25 19:48:15 by cane 
buidlfindargs() prototypes has been modified

dpm/h/sfgc2.h: 1.8 92/11/11 16:48:08 by cane 
added linkscan field

dpm/dpm/dpm.mk: 3.12 92/11/18 18:12:19 by cane 
the old sfgc has been renamed sfgc_old and removed from the target list - the sfgc2 has been renamed sfgc

dpm/dpm/sfgc.c: 1.34 92/11/26 11:24:45 by cane 
fixed buildfindargs() and collect() to remove empty expression such as \( \) in the find arguments line

dpm/dpm/sfgc.c: 1.33 92/11/25 19:50:36 by cane 
buildfindargs() has been modified to be called twice - the first time to search for files and the second to search for links(!)

dpm/dpm/sfgc.c: 1.32 92/11/11 17:07:13 by cane 
pool scan and link directory scan are now done together

dpm/dpm/sfgc.c: 1.31 92/11/11 14:45:15 by cane 
the directory path used in find requires to be in the form path/. otherwise is path is a link to a directory then find doesn't work

dpm/dpm/sfgc.c: 1.30 92/11/10 14:36:29 by cane 
fixed bug in -link options: -all options must be set

dpm/dpm/sfgc.c: 1.29 92/11/06 14:45:09 by cane 
added option link and its handler code

dpm/dpm/sfgc.c: 1.28 92/11/03 11:51:10 by cane 
added include <select.h> for AIX

dpm/dpm/sfgc.c: 1.27 92/10/08 11:03:06 by cane 
added include <sys/types.h> for ULTRIX

dpm/dpm/sfgc.c: 1.26 92/10/05 17:14:38 by cane 
fixed the usage() function

dpm/dpm/sfgc.c: 1.25 92/09/30 15:49:25 by cane 
CRAY UniCOS supported

dpm/dpm/sfgc.c: 1.24 92/09/29 11:44:16 by cane 
added required extern declaration

dpm/dpm/sfgc.c: 1.23 92/09/29 10:16:49 by cane 
wait3() has a different 1st argument type in Iris 4

dpm/dpm/sfgc.c: 1.22 92/09/18 12:22:57 by cane 
added sfgc_authorization()

dpm/dpm/sfgc.c: 1.21 92/09/18 12:14:20 by cane 
fixed foreachpool() to complete the loop

dpm/dpm/sfgc.c: 1.20 92/09/18 11:51:31 by cane 
fixed bug in some calls

dpm/dpm/sfgc.c: 1.19 92/09/18 11:17:16 by cane 
fixed error in getsfgcoption()

dpm/dpm/sfgc.c: 1.18 92/09/18 10:59:29 by cane 
fixed warning on SGI

dpm/dpm/sfgc.c: 1.17 92/09/18 10:38:25 by cane 
added collect option in the usage

dpm/dpm/sfgc.c: 1.16 92/09/17 12:23:38 by cane 
find options -cpio and -ncpio are not allowed - the build find shell command now doesn't contain the '-type d' because the directories are detected and discarded in the readline() so it's possible now to use '-prune'

dpm/dpm/sfgc.c: 1.15 92/09/17 12:04:22 by cane 
fixed the collect and check option in case of directories specification

dpm/dpm/sfgc.c: 1.14 92/09/17 11:25:11 by cane 
added getdirstat() and modified the getpoolspace() and collect() functions in order to handle the directories specification

dpm/dpm/sfgc.c: 1.13 92/09/16 16:39:01 by cane 
added -collect option

dpm/dpm/sfgc.c: 1.12 92/09/16 12:54:26 by cane 
left option now requires either space or rate and device options

dpm/dpm/sfgc.c: 1.11 92/09/16 12:46:34 by cane 
fixed the -check option - fixed the messages in removegarbage()

dpm/dpm/sfgc.c: 1.10 92/09/15 10:25:49 by cane 
fixed the -big option

dpm/dpm/sfgc.c: 1.9 92/09/14 17:24:05 by cane 
added the shift file list ( data structure and functions ), removegarbage() and gc_printf()

dpm/dpm/sfgc.c: 1.8 92/09/08 14:14:16 by cane 
added '#define _BSD_SIGNALS' for the SGI

dpm/dpm/sfgc.c: 1.7 92/09/08 14:09:43 by cane 
added include <parser.h>

dpm/dpm/sfgc.c: 1.6 92/09/08 14:03:29 by cane 
added collect(), selectoutput() and readoutput()

dpm/dpm/sfgc.c: 1.5 92/09/07 16:24:13 by cane 
added printsfgcopt() and getpoolspace()

dpm/dpm/sfgc.c: 1.4 92/09/07 10:34:46 by cane 
added foreachpool() and getpoolstat()

dpm/dpm/sfgc.c: 1.3 92/09/03 15:05:49 by cane 
added convertoptions() and getdirectories() 

dpm/dpm/sfgc.c: 1.2 92/09/02 15:11:53 by cane 
added buildfindargs()

dpm/dpm/sfgc.c: 1.1 92/09/02 14:07:09 by cane 
date and time created 92/09/02 14:07:09 by cane

NEW file: dpm/dpm/sfgc_old.c(3.9)
dpm/dpm/sfgc_old.c: 3.9 92/10/07 10:19:51 by cane 
gc_printf() moved to sfgc.c file

DELETED file : dpm/dpm/sfgc2.c (1.29)
************************ VERSION 1.3.5 *****************************
common/common.mk: 1.13 92/11/02 14:39:36 by acher 
switched use of file readf.F for CRAY machines only

common/cray.mk: 1.16 92/11/02 14:39:56 by acher 
switched use of file readf.F for CRAY machines only

tape/readlbl.c: 1.9 92/11/04 12:07:16 by baud 
new STK units need to rest a little bit after a large block is detected

tape/usrlbl.c: 1.4 92/11/06 12:26:10 by baud 
on hpux, EOT status must be cleared after each write (EOV)

rfio/aix.mk: 1.2 92/11/02 15:45:37 by acher 
 replaced fortran files with C files for fortran IOs

rfio/aixesa.mk: 1.2 92/11/02 15:45:50 by acher 
 replaced fortran files with C files for fortran IOs

rfio/apollo.mk: 3.2 92/11/02 15:43:57 by acher 
replaced fortran files with C files for fortran IOs

rfio/cray.mk: 3.2 92/11/02 15:48:13 by acher 
Included variables for fortran IOs

rfio/fio.c: 1.2 92/11/02 14:54:47 by acher 


rfio/hp.mk: 3.2 92/11/02 15:45:19 by acher 
 replaced fortran files with C files for fortran IOs

rfio/rfio.mk: 3.6 92/11/02 15:44:17 by acher 
 replaced fortran files with C files for fortran IOs

rfio/rfio_fcalls.c: 3.5 92/11/02 14:57:03 by acher 


rfio/sgi.mk: 3.2 92/11/02 15:44:30 by acher 
 replaced fortran files with C files for fortran IOs

rfio/sun.mk: 3.2 92/11/02 15:44:46 by acher 
 replaced fortran files with C files for fortran IOs

rfio/ultrix.mk: 3.2 92/11/02 15:45:02 by acher 
 replaced fortran files with C files for fortran IOs

rtcopy/sgi.mk: 2.2 92/11/05 15:25:22 by acher 
Added options -lsun && -lulsock

dpm/h/sfgc2.h: 1.7 92/11/06 14:44:21 by cane 
added link option value

dpm/dpm/sfgc2.c: 1.29 92/11/06 14:45:09 by cane 
added option link and its handler code

dpm/dpm/sfgc2.c: 1.28 92/11/03 11:51:10 by cane 
added include <select.h> for AIX

************************ VERSION 1.3.4 *****************************
h/osdep.h: 1.4 92/10/14 10:06:37 by hemmer 
IBM doesn't define AIXes as unix !

msg/oper.c: 1.11 92/10/29 09:26:48 by baud 
signal handling routines must be reactivated each time on hpux

tape/mounttape.c: 1.26 92/10/19 15:12:28 by baud 
if tape is nl, cannot take blksize, recl and recfm from hdr2

tape/posittape.c: 1.12 92/10/19 15:13:41 by baud 
does not copy error message if rc = 0 (not printed anyway)

tape/posittape.c: 1.11 92/10/14 15:37:31 by baud 
add option -qu

tape/tpdaemon.c: 1.35 92/10/29 09:39:17 by baud 
must also wait for children with hpux

tape/tpdaemon.c: 1.34 92/10/23 10:49:44 by baud 
does not free urtp in clean4jobdied if unit unloading (asn=-1)

NEW file: tape/tpdaemon.man(1.1)
tape/tpdaemon.man: 1.1 92/10/21 15:10:13 by baud 
date and time created 92/10/21 15:10:13 by baud

tape/tpmnt.c: 1.18 92/10/14 15:37:09 by baud 
add option -qu

tape/tpmnt.man: 1.7 92/10/21 10:47:48 by baud 
put in bold some option letters

tape/tpmnt.man: 1.6 92/10/14 15:45:30 by baud 
add option -qu

NEW file: rfio/fio.c(1.1)
rfio/fio.c: 1.1 92/10/29 09:47:13 by acher 
date and time created 92/10/29 09:47:13 by acher

rfio/rfio.mk: 3.5 92/10/29 09:26:10 by acher 
Fortran IOs supported by C code fio.c

rfio/rfio_fcalls.c: 3.4 92/10/29 09:51:26 by acher 
Fortran IOs supported by C code fio.c .F.Hassine

rfio/rfio_serv.c: 3.7 92/10/29 09:20:31 by acher 
Corrected Bug for HPs (Zombies multiplication bug)

rtcopy/hp.mk: 1.3 92/10/29 10:19:56 by baud 
the server side has now been ported

rtcopy/rtcopy.shift: 2.14 92/10/14 15:33:22 by baud 
add option -qu

rtcopy/rtcopyd.c: 2.12 92/10/29 09:34:05 by baud 
add ifdefs for hpux

dpm/cray.mk: 1.2 92/10/01 16:57:24 by cane 
make for the new version of DPM

dpm/sun.mk: 1.3.3.1 92/09/30 11:08:46 by cane 
removed some comments

dpm/h/config.h: 3.2 92/09/30 11:54:10 by cane 
CRAY UniCOS supported

NEW file: dpm/h/cray.mk(1.1)
dpm/h/cray.mk: 1.1 92/10/01 17:02:25 by cane 
date and time created 92/10/01 17:02:25 by cane

dpm/h/dpmutil.h: 3.8 92/10/19 10:55:36 by cane 
added prototypes

dpm/h/dpmutil.h: 3.7 92/09/30 11:54:44 by cane 
CRAY UniCOS supported

dpm/h/h.mk: 3.9 92/10/05 16:37:42 by cane 
added aixesa.mk in the TAROBJS list

dpm/h/marshall.h: 3.2 92/10/01 16:49:12 by cane 
fixed bug in unmarshall_LONG/_SHORT in case of negative number

dpm/h/pktutil.h: 3.2 92/10/01 14:06:57 by cane 
fixed bug in HEADER_NETSIZ specification

dpm/h/sfgc2.h: 1.6 92/09/29 11:15:43 by cane 
wait3() requires a union wait as 1st arg in Irix 4

NEW file: dpm/util/cray.mk(1.1)
dpm/util/cray.mk: 1.1 92/10/01 17:01:48 by cane 
date and time created 92/10/01 17:01:48 by cane

dpm/parser/command.c: 3.6 92/09/30 11:55:32 by cane 
CRAY UniCOS supported

dpm/parser/config.c: 3.7 92/10/08 11:41:59 by cane 
fixed error in fflush() call in close_binary()

dpm/parser/config.c: 3.6 92/10/01 16:50:15 by cane 
fflush() added : ftruncate fails on CRAY UniCOS otherwise

dpm/parser/config.c: 3.5 92/09/30 17:16:21 by cane 
fixed print_environment()

dpm/parser/cray.mk: 3.2 92/10/01 16:59:34 by cane 
make for the new version of DPM

dpm/parser/data.c: 3.5 92/10/05 16:53:23 by cane 
define malloc() for AIXESA

dpm/parser/parser.mk: 3.5 92/10/05 17:02:31 by cane 
modify rules for library generation under AIXESA

dpm/parser/parser.mk: 3.4 92/09/21 14:54:26 by cane 
added include macro - removed some comments

dpm/parser/parser.mk: 3.3 92/07/22 14:33:28 by cane 
removed not-standard targets

dpm/parser/parser.mk: 3.2 92/06/23 14:35:04 by cane 
added library libdpm.a because required by lock_filesystem()

dpm/parser/parser.mk: 3.1 92/06/16 18:26:52 by cane 
SHIFT DPM Version 3.1

dpm/parser/parser.mk: 2.4 92/04/30 12:54:30 by cane 
added sfdpmd.man and sfoptions.man in the target maketar

dpm/parser/parser.mk: 2.3 92/04/21 15:54:37 by cane 
added sfsyntax.man in the maketar target

dpm/parser/parser.mk: 2.2 92/04/19 10:57:37 by cane 
added dpm.man

dpm/parser/parser.mk: 2.1 92/04/01 09:52:37 by cane 
SHIFT V2.1

dpm/parser/parser.mk: 1.30 92/03/24 11:59:51 by cane 
added hp.mk

dpm/parser/parser.mk: 1.29 92/03/24 11:38:53 by cane 
moved tests in the test directory

dpm/parser/parser.mk: 1.28 92/03/24 10:01:40 by cane 
fixed error in sfmake generation

dpm/parser/parser.mk: 1.27 92/03/23 12:12:29 by cane 
fixed error in sfmaked.o and sfmake.o target

dpm/parser/parser.mk: 1.26 92/03/23 12:05:54 by cane 
replaced sfmake.c by sfmakem.c

dpm/parser/parser.mk: 1.25 92/03/23 11:48:35 by cane 
added aix.mk in the tar file

dpm/parser/parser.mk: 1.24 92/03/23 11:45:40 by cane 
modified parser.mk for the AIX (RS6000)

dpm/parser/parser.mk: 1.23 92/03/23 11:00:25 by cane 
modified comments

dpm/parser/parser.mk: 1.22 92/02/27 17:28:23 by cane 
added sfmaked

dpm/parser/parser.mk: 1.21 92/02/26 17:07:56 by cane 
added test_getconfent in the test-install target

dpm/parser/parser.mk: 1.20 92/02/26 16:11:21 by cane 
added test_getconfent() in the target clobber

dpm/parser/parser.mk: 1.19 92/02/26 16:01:14 by cane 
added test_getconfent.c file and test_getconfent target

dpm/parser/parser.mk: 1.18 92/02/20 16:17:44 by cane 
added getconfent.c

dpm/parser/parser.mk: 1.17 92/02/12 17:27:22 by cane 
added ultrix.mk - fixed comments

dpm/parser/parser.mk: 1.16 92/02/11 18:43:01 by cane 
added sfmake.man in the target 'maketar'

dpm/parser/parser.mk: 1.15 92/02/04 16:56:21 by cane 
modified SHIFTBIN

dpm/parser/parser.mk: 1.14 92/02/04 16:26:25 by cane 
test-install / code-install target added

dpm/parser/parser.mk: 1.13 92/02/04 10:00:33 by cane 
added target code-install mk-install sccs-info and sccs-clean

dpm/parser/parser.mk: 1.12 92/02/03 11:32:05 by cane 
added data.c

dpm/parser/parser.mk: 1.11 92/01/31 18:10:58 by cane 
added command.c file

dpm/parser/parser.mk: 1.10 92/01/29 18:19:00 by cane 
added runtestp - subdirectory test removed from target maketar

dpm/parser/parser.mk: 1.9 92/01/29 17:35:00 by cane 
added test_parser.c

dpm/parser/parser.mk: 1.8 92/01/22 09:45:04 by cane 
added client.c and server.c

dpm/parser/parser.mk: 1.7 92/01/10 10:28:37 by cane 
test_parser deleted

dpm/parser/parser.mk: 1.6 92/01/07 11:23:46 by cane 
mknet.c added

dpm/parser/parser.mk: 1.5 91/12/19 10:41:17 by cane 
parser.mk added in the tar file

dpm/parser/parser.mk: 1.4 91/12/19 09:55:41 by cane 
added maketar and info targets

dpm/parser/parser.mk: 1.3 91/12/18 17:25:09 by cane 
sfmake added in clobber

dpm/parser/parser.mk: 1.2 91/12/18 17:19:58 by cane 
user.c config.c and sfmake.c added

dpm/parser/parser.mk: 1.1 91/12/12 15:36:20 by cane 
date and time created 91/12/12 15:36:20 by cane

dpm/parser/sfmake.man: 3.2 92/10/20 14:28:32 by cane 
added wlock and wunlock options descriptions

dpm/parser/sfsyntax.man: 3.4 92/10/20 16:37:29 by cane 
added sfgc(1) reference

dpm/parser/sfsyntax.man: 3.3 92/10/20 11:39:07 by cane 
added RESIDENT item

dpm/parser/sfsyntax.man: 3.2 92/10/20 11:35:07 by cane 
added SUPERPOOL declaration and removed the SFGETLOCK item

dpm/parser/sgi.mk: 3.2 92/09/21 14:54:54 by cane 
removed include macro and some comments

dpm/parser/sgi.mk: 3.1 92/06/16 18:26:47 by cane 
SHIFT DPM Version 3.1

dpm/parser/sgi.mk: 2.1 92/04/01 09:52:33 by cane 
SHIFT V2.1

dpm/parser/sgi.mk: 1.7 92/03/23 10:59:42 by cane 
modified comments

dpm/parser/sgi.mk: 1.6 92/03/13 16:38:39 by cane 
sfmake and other prgs are now linked to the sun library because of Yellow Page

dpm/parser/sgi.mk: 1.5 92/02/12 17:27:39 by cane 
fixed comments

dpm/parser/sgi.mk: 1.4 92/02/04 16:52:48 by cane 
deleted SHIFTBIN

dpm/parser/sgi.mk: 1.3 92/02/04 16:51:55 by cane 
added SHIFTBIN

dpm/parser/sgi.mk: 1.2 91/12/19 11:05:32 by cane 
-lmalloc added in LDLIBS

dpm/parser/sgi.mk: 1.1 91/12/12 15:34:45 by cane 
date and time created 91/12/12 15:34:45 by cane

dpm/parser/shift.conf: 3.3 92/09/30 11:07:48 by cane 
removed some comments

dpm/parser/table.c: 3.7 92/09/29 11:07:02 by cane 
fixed syntax error in alloc_table()

NEW file: dpm/dpm/cray.mk(1.1)
dpm/dpm/cray.mk: 1.1 92/10/01 16:58:34 by cane 
date and time created 92/10/01 16:58:34 by cane

dpm/dpm/disk.c: 3.5 92/10/05 17:11:06 by cane 
statfs is defined in <sys/mount.h> instead of <sys/statfs.h> for AIXESA

dpm/dpm/disk.c: 3.4 92/09/30 15:31:30 by cane 
CRAY UniCOS supported

dpm/dpm/dosfgc.c: 3.4 92/10/07 10:19:36 by cane 
gc_printf() moved to sfgc.c file

dpm/dpm/dosfget.c: 3.10 92/10/16 10:43:15 by cane 
added a parameter to symlinkop() and changed its body

dpm/dpm/dosfget.c: 3.9 92/10/15 10:04:52 by cane 
fixed error setting uid and gid

dpm/dpm/dosfrm.c: 3.6 92/10/15 10:06:25 by cane 
fixed error setting uid and gid 

dpm/dpm/dosfrm.c: 3.5 92/09/30 11:59:48 by cane 
CRAY UniCOS supported

dpm/dpm/dpm.man: 3.2 92/10/20 16:33:18 by cane 
added -Linkdir and -group options

dpm/dpm/dpm.mk: 3.11 92/10/05 17:14:07 by cane 
modify rules for library generation under AIXESA

dpm/dpm/dpm.mk: 3.10 92/09/30 12:34:46 by cane 
sflock removed from the target list

dpm/dpm/dpmutil.c: 3.13 92/10/15 10:08:00 by cane 
fixed error setting uid and gid in beclient()

dpm/dpm/dpmutil.c: 3.12 92/09/30 12:22:54 by cane 
CRAY UniCOS supported

dpm/dpm/select.c: 3.8 92/09/30 12:25:27 by cane 
CRAY UniCOS supported

dpm/dpm/sfdpmd.c: 3.4 92/09/30 15:47:56 by cane 
CRAY UniCOS supported

dpm/dpm/sfgc.c: 3.9 92/10/07 10:19:51 by cane 
gc_printf() moved to sfgc.c file

dpm/dpm/sfgc2.c: 1.27 92/10/08 11:03:06 by cane 
added include <sys/types.h> for ULTRIX

dpm/dpm/sfgc2.c: 1.26 92/10/05 17:14:38 by cane 
fixed the usage() function

dpm/dpm/sfgc2.c: 1.25 92/09/30 15:49:25 by cane 
CRAY UniCOS supported

dpm/dpm/sfgc2.c: 1.24 92/09/29 11:44:16 by cane 
added required extern declaration

dpm/dpm/sfget.c: 3.7 92/10/28 16:13:35 by cane 
option -L renamed -link

dpm/dpm/sfget.c: 3.6 92/10/16 10:42:33 by cane 
-link option renamed -linkdir and changed its syntax

dpm/dpm/sfmvfs: 1.2 92/09/30 11:07:12 by cane 
removed some comments

dpm/dpm/sfoptions.man: 3.2 92/10/20 14:34:10 by cane 
added reference to sfgc(1) - other modifications

dpm/dpm/sfrm.c: 3.6 92/10/28 16:14:02 by cane 
option -L renamed -link

dpm/dpm/sfrm.c: 3.5 92/10/16 10:42:20 by cane 
-link option renamed -linkdir and changed its syntax

dpm/dpm/sfrpc.c: 3.4 92/10/05 17:15:58 by cane 
modify #ifdefs for AIXESA

dpm/dpm/sgi.mk: 3.2 92/09/21 14:48:25 by cane 
removed include macro

dpm/dpm/sgi.mk: 3.1 92/06/16 18:17:09 by cane 
SHIFT DPM Version 3.1

dpm/dpm/sgi.mk: 2.2 92/04/28 18:32:06 by cane 
added symbol __DIRECT__

dpm/dpm/sgi.mk: 2.1 92/04/01 09:49:05 by cane 
SHIFT V2.1

dpm/dpm/sgi.mk: 1.4 92/03/23 11:08:07 by cane 
modified comments

dpm/dpm/sgi.mk: 1.3 92/03/13 16:36:34 by cane 
dpm is now linked to the sun library because of Yellow Page

dpm/dpm/sgi.mk: 1.2 92/02/25 12:20:53 by cane 
replaced include parser.mk by include dpm.mk

dpm/dpm/sgi.mk: 1.1 92/02/20 10:29:17 by cane 
date and time created 92/02/20 10:29:17 by cane

************************ VERSION 1.3.3 *****************************
tape/tpdaemon.c: 1.33 92/10/05 08:37:59 by baud 
accepts tabs in TPCONFIG file

tms/send2tmsd.c: 1.7 92/10/07 08:15:46 by baud 
correct comment

dpm/dpm.mk: 3.6 92/10/05 15:23:02 by hemmer 
Keep consistent with other makefiles

dpm/parser/parser.mk: 3.6 92/10/05 15:24:27 by hemmer 
Keep consistent with other makefiles

dpm/dpm/dpm.mk: 3.9 92/10/05 15:24:59 by hemmer 
Keep consistent with other makefiles.

************************ VERSION 1.3.2 *****************************
tape/tpdaemon.c: 1.32 92/09/30 17:09:18 by baud 
correct typo error in lddisplay feature which produced crashes on SUN1

tape/nextvol.c: 1.4 92/09/29 14:02:03 by baud 
include <sys/types.h> because of dev_t, gid_t, ... in "tape.h"

dpm/aixesa.mk: 1.2 92/09/30 15:26:41 by baud 
replace dummy makefile

dpm/h/h.mk: 3.8 92/09/30 15:35:11 by baud 
add aixesa.mk to the list TAROBJS

NEW file: dpm/h/aixesa.mk(1.1)
dpm/h/aixesa.mk: 1.1 92/09/30 15:29:21 by baud 
date and time created 92/09/30 15:29:21 by baud

dpm/util/pktutil.c: 3.2 92/09/30 15:41:36 by baud 
modify #ifdefs for AIXESA

dpm/util/sockutil.c: 3.3 92/09/30 15:43:02 by baud 
AIXESA does not support parallel connects

dpm/util/util.mk: 3.4 92/09/30 15:44:55 by baud 
modify rules for library generation under AIXESA

NEW file: dpm/util/aixesa.mk(1.1)
dpm/util/aixesa.mk: 1.1 92/09/30 15:29:47 by baud 
date and time created 92/09/30 15:29:47 by baud

dpm/parser/data.c: 3.4 92/09/30 15:49:29 by baud 
define malloc() for AIXESA

dpm/parser/mknet.c: 3.2 92/09/30 15:50:39 by baud 
modify #ifdefs for AIXESA

dpm/parser/parser.mk: 3.5 92/09/30 15:53:26 by baud 
modify rules for library generation under AIXESA

dpm/parser/server.c: 3.4 92/09/30 15:51:34 by baud 
modify #ifdefs for AIXESA

NEW file: dpm/parser/aixesa.mk(1.1)
dpm/parser/aixesa.mk: 1.1 92/09/30 15:30:05 by baud 
date and time created 92/09/30 15:30:05 by baud

dpm/dpm/disk.c: 3.3 92/09/30 15:59:43 by baud 
statfs is defined in <sys/mount.h> instead of <sys/statfs.h> for AIXESA

dpm/dpm/dpm.mk: 3.8 92/09/30 16:00:51 by baud 
modify rules for library generation under AIXESA

dpm/dpm/sfrpc.c: 3.3 92/09/30 16:01:56 by baud 
modify #ifdefs for AIXESA

NEW file: dpm/dpm/aixesa.mk(1.1)
dpm/dpm/aixesa.mk: 1.1 92/09/30 15:30:22 by baud 
date and time created 92/09/30 15:30:22 by baud

************************ VERSION 1.3.1 *****************************
DPM is now part of the official distribution
./shift.mk: 1.14 92/09/28 11:40:59 by hemmer 
Cater for dpm.

examples/read.d.u.f: 1.2 92/09/28 11:21:18 by baud 
suppress blank line at end of program (after END line)

examples/readdsk.f: 1.2 92/09/28 11:21:15 by baud 
suppress blank line at end of program (after END line)

examples/write.a.f: 1.2 92/09/28 11:21:18 by baud 
suppress blank line at end of program (after END line)

examples/write.d.f: 1.2 92/09/28 11:21:17 by baud 
suppress blank line at end of program (after END line)

examples/writedsk.f: 1.2 92/09/28 11:21:16 by baud 
suppress blank line at end of program (after END line)

msg/oper.c: 1.10 92/09/28 10:55:45 by baud 
modify #ifdefs for AIXESA

rfio/ferror.c: 3.2 92/09/28 10:06:10 by hemmer 
without returning, this expression had no effect.

rtcopy/sun.mk: 2.3 92/09/28 10:40:41 by hemmer 
SUNOS_4.1.1 complains on unaligned buffers while reading tapes.

rtcopy/tptodkF.c: 2.8 92/09/28 10:18:52 by hemmer 
SUNOS_4.1.1 complains on unaligned buffers while reading tapes.

NEW file: dpm/aix.mk(3.1)
dpm/aix.mk: 3.1 92/06/16 18:34:34 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/apollo.mk(3.2)
dpm/apollo.mk: 3.2 92/09/21 14:34:12 by cane 
removed some comments

NEW file: dpm/dpm.mk(3.5)
dpm/dpm.mk: 3.5 92/09/21 14:34:37 by cane 
removed some comments

NEW file: dpm/hp.mk(3.1)
dpm/hp.mk: 3.1 92/06/16 18:34:32 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/sgi.mk(3.2)
dpm/sgi.mk: 3.2 92/09/21 14:35:21 by cane 
removed some comments

NEW file: dpm/sun.mk(1.3.2.1)
dpm/sun.mk: 1.3.2.1 92/09/21 15:24:14 by cane 
removed some comments

NEW file: dpm/ultrix.mk(3.2)
dpm/ultrix.mk: 3.2 92/09/21 14:36:14 by cane 
removed some comments

NEW file: dpm/aixesa.mk(1.1)
dpm/aixesa.mk: 1.1 92/09/28 11:21:14 by hemmer 
date and time created 92/09/28 11:21:14 by hemmer

NEW file: dpm/cray.mk(1.1)
dpm/cray.mk: 1.1 92/09/28 13:48:04 by hemmer 
date and time created 92/09/28 13:48:04 by hemmer

NEW file: dpm/h/aix.mk(3.2)
dpm/h/aix.mk: 3.2 92/09/21 14:39:06 by cane 
removed old target

NEW file: dpm/h/apollo.mk(3.2)
dpm/h/apollo.mk: 3.2 92/09/21 14:39:36 by cane 
removed old target

NEW file: dpm/h/bits.h(3.1)
dpm/h/bits.h: 3.1 92/06/16 18:33:02 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/client.h(3.1)
dpm/h/client.h: 3.1 92/06/16 18:33:13 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/command.h(3.2)
dpm/h/command.h: 3.2 92/06/23 14:47:24 by cane 
added lock_filesystem() prototypes

NEW file: dpm/h/config.h(3.1)
dpm/h/config.h: 3.1 92/06/16 18:33:04 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/data.h(3.1)
dpm/h/data.h: 3.1 92/06/16 18:33:09 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/dosfgc.h(3.1)
dpm/h/dosfgc.h: 3.1 92/06/16 18:33:27 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/dpmutil.h(3.6)
dpm/h/dpmutil.h: 3.6 92/09/04 15:21:02 by cane 
SHIFTSYMLINKDIR 's value is now DPMLINKDIR

NEW file: dpm/h/flock.h(3.1)
dpm/h/flock.h: 3.1 92/06/16 18:33:22 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/getconfent.h(3.1)
dpm/h/getconfent.h: 3.1 92/06/16 18:33:21 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/h.mk(3.7)
dpm/h/h.mk: 3.7 92/09/21 15:29:04 by cane 
added sfgc2.h in the object list

NEW file: dpm/h/hp.mk(3.2)
dpm/h/hp.mk: 3.2 92/09/21 14:40:31 by cane 
removed old target

NEW file: dpm/h/marshall.h(3.1)
dpm/h/marshall.h: 3.1 92/06/16 18:32:57 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/mknet.h(3.1)
dpm/h/mknet.h: 3.1 92/06/16 18:33:00 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/optutil.h(3.1)
dpm/h/optutil.h: 3.1 92/06/16 18:33:03 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/osdep.h(3.1)
dpm/h/osdep.h: 3.1 92/06/16 18:32:59 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/parser.h(3.1)
dpm/h/parser.h: 3.1 92/06/16 18:32:53 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/pktutil.h(3.1)
dpm/h/pktutil.h: 3.1 92/06/16 18:32:58 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/scandir.h(3.1)
dpm/h/scandir.h: 3.1 92/06/16 18:33:28 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/server.h(3.1)
dpm/h/server.h: 3.1 92/06/16 18:33:11 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/sfdpmd.h(3.1)
dpm/h/sfdpmd.h: 3.1 92/06/16 18:33:24 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/sfgc.h(3.2)
dpm/h/sfgc.h: 3.2 92/06/23 16:08:49 by cane 
verbose and inqsub modes removed

NEW file: dpm/h/sgi.mk(3.2)
dpm/h/sgi.mk: 3.2 92/09/21 14:41:29 by cane 
removed old target and some comments

NEW file: dpm/h/shift_limits.h(3.2)
dpm/h/shift_limits.h: 3.2 92/08/04 16:36:57 by cane 
changed the VERSION number ( OLD was 0x0F4689FF )

NEW file: dpm/h/shift_macros.h(3.1)
dpm/h/shift_macros.h: 3.1 92/06/16 18:32:48 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/shift_types.h(3.1)
dpm/h/shift_types.h: 3.1 92/06/16 18:32:40 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/shiftconf.h(3.1)
dpm/h/shiftconf.h: 3.1 92/06/16 18:33:15 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/sockutil.h(3.1)
dpm/h/sockutil.h: 3.1 92/06/16 18:32:55 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/strdup.h(3.1)
dpm/h/strdup.h: 3.1 92/06/16 18:33:14 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/strerror.h(3.1)
dpm/h/strerror.h: 3.1 92/06/16 18:32:54 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/strtok.h(3.1)
dpm/h/strtok.h: 3.1 92/06/16 18:32:43 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/strutil.h(3.1)
dpm/h/strutil.h: 3.1 92/06/16 18:32:51 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/sun.mk(3.2)
dpm/h/sun.mk: 3.2 92/09/21 14:41:56 by cane 
removed old target and some comments

NEW file: dpm/h/table.h(3.4)
dpm/h/table.h: 3.4 92/08/18 16:12:56 by cane 
modified the add_filesystopool() prototype

NEW file: dpm/h/ultrix.mk(3.2)
dpm/h/ultrix.mk: 3.2 92/09/21 14:42:27 by cane 
removed old target and some comments

NEW file: dpm/h/user.h(3.1)
dpm/h/user.h: 3.1 92/06/16 18:32:49 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/h/sfgc2.h(1.5)
dpm/h/sfgc2.h: 1.5 92/09/18 12:22:15 by cane 
added sfgc_authorization() prototype

NEW file: dpm/util/aix.mk(3.2)
dpm/util/aix.mk: 3.2 92/09/21 14:57:35 by cane 
removed include macro

NEW file: dpm/util/apollo.mk(3.2)
dpm/util/apollo.mk: 3.2 92/09/21 14:58:00 by cane 
removed include macro

NEW file: dpm/util/dump.c(3.1)
dpm/util/dump.c: 3.1 92/06/16 18:30:00 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/flock.c(3.1)
dpm/util/flock.c: 3.1 92/06/16 18:30:09 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/futil.c(3.2)
dpm/util/futil.c: 3.2 92/06/24 17:50:20 by cane 
fdtono() replaced by a function using fileno()

NEW file: dpm/util/gethostname.c(3.1)
dpm/util/gethostname.c: 3.1 92/06/16 18:30:11 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/hp.mk(3.2)
dpm/util/hp.mk: 3.2 92/09/21 14:58:24 by cane 
removed include macro and some comments

NEW file: dpm/util/optutil.c(3.3)
dpm/util/optutil.c: 3.3 92/09/28 14:08:31 by cane 
fixed mistake in GET_option()

NEW file: dpm/util/pktutil.c(3.1)
dpm/util/pktutil.c: 3.1 92/06/16 18:29:57 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/random.c(3.1)
dpm/util/random.c: 3.1 92/06/16 18:30:07 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/sgi.mk(3.2)
dpm/util/sgi.mk: 3.2 92/09/21 14:58:51 by cane 
removed include macro and some comments

NEW file: dpm/util/shiftconf.c(3.1)
dpm/util/shiftconf.c: 3.1 92/06/16 18:30:04 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/sockutil.c(3.2)
dpm/util/sockutil.c: 3.2 92/08/24 15:07:28 by cane 
fixed equal_hosts()

NEW file: dpm/util/strdup.c(3.1)
dpm/util/strdup.c: 3.1 92/06/16 18:29:59 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/strerror.c(3.1)
dpm/util/strerror.c: 3.1 92/06/16 18:29:48 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/strtok.c(3.1)
dpm/util/strtok.c: 3.1 92/06/16 18:29:49 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/strutil.c(3.1)
dpm/util/strutil.c: 3.1 92/06/16 18:29:51 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/sun.mk(3.2)
dpm/util/sun.mk: 3.2 92/09/21 14:59:20 by cane 
removed include macro and some comments

NEW file: dpm/util/ultrix.mk(3.2)
dpm/util/ultrix.mk: 3.2 92/09/21 14:59:44 by cane 
removed include macro and some comments

NEW file: dpm/util/uppercase.c(3.1)
dpm/util/uppercase.c: 3.1 92/06/16 18:29:50 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/user.c(3.1)
dpm/util/user.c: 3.1 92/06/16 18:30:02 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/util/util.mk(3.3)
dpm/util/util.mk: 3.3 92/09/21 15:00:31 by cane 
added include macro

NEW file: dpm/parser/aix.mk(3.2)
dpm/parser/aix.mk: 3.2 92/09/21 14:51:52 by cane 
removed include macro

NEW file: dpm/parser/apollo.mk(3.2)
dpm/parser/apollo.mk: 3.2 92/09/21 14:52:22 by cane 
removed include macro and some comments

NEW file: dpm/parser/client.c(3.2)
dpm/parser/client.c: 3.2 92/08/19 17:03:36 by cane 
added send_request_host() used to send a request with the local host name 

NEW file: dpm/parser/command.c(3.5)
dpm/parser/command.c: 3.5 92/07/11 14:54:11 by cane 
fixed error in lock_filesystem: the authorization to export is now checked

NEW file: dpm/parser/config.c(3.4)
dpm/parser/config.c: 3.4 92/08/05 11:15:38 by cane 
fixed is_host_authorized() in case the open_binary() fails

NEW file: dpm/parser/cray.mk(3.1)
dpm/parser/cray.mk: 3.1 92/06/16 18:26:46 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/parser/data.c(3.3)
dpm/parser/data.c: 3.3 92/08/19 15:41:39 by cane 
fixed read/write/unmarshall_tables() to support an empty super pool table

NEW file: dpm/parser/dpm.lex(3.4)
dpm/parser/dpm.lex: 3.4 92/08/06 17:12:49 by cane 
removed some tokens that are replaced by the characters

NEW file: dpm/parser/dpm.yacc(3.7)
dpm/parser/dpm.yacc: 3.7 92/08/19 13:46:59 by cane 
super pool access is now optional - in any case it's not implemented yet!

NEW file: dpm/parser/getconfent.c(3.1)
dpm/parser/getconfent.c: 3.1 92/06/16 18:27:10 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/parser/hp.mk(3.2)
dpm/parser/hp.mk: 3.2 92/09/21 14:53:34 by cane 
removed include macro

NEW file: dpm/parser/mknet.c(3.1)
dpm/parser/mknet.c: 3.1 92/06/16 18:27:01 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/parser/parser.c(3.2)
dpm/parser/parser.c: 3.2 92/08/06 17:15:57 by cane 
modified yyerror() - renamed set_shift_config(), set_shift_account() and set_shift_pair()

NEW file: dpm/parser/parser.mk(3.4)
dpm/parser/parser.mk: 3.4 92/09/21 14:54:26 by cane 
added include macro - removed some comments

NEW file: dpm/parser/runtestp(3.1)
dpm/parser/runtestp: 3.1 92/06/16 18:27:00 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/parser/server.c(3.3)
dpm/parser/server.c: 3.3 92/08/19 17:05:04 by cane 
the remote host name is now received in the request body - the host name got from tcp could be changed because of different networks

NEW file: dpm/parser/sfmake.man(3.1)
dpm/parser/sfmake.man: 3.1 92/06/16 18:27:09 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/parser/sfmakem.c(3.2)
dpm/parser/sfmakem.c: 3.2 92/06/23 14:33:54 by cane 
added wlock and wunlock options

NEW file: dpm/parser/sfsyntax.man(3.1)
dpm/parser/sfsyntax.man: 3.1 92/06/16 18:27:16 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/parser/sgi.mk(3.3)
dpm/parser/sgi.mk: 3.3 92/09/28 15:05:42 by hemmer 
Make Irix 4.0.5 happy.

NEW file: dpm/parser/shift.conf(3.2)
dpm/parser/shift.conf: 3.2 92/06/22 10:55:39 by cane 
added SHIFT LOCALHOST <name>

NEW file: dpm/parser/sun.mk(3.2)
dpm/parser/sun.mk: 3.2 92/09/21 14:55:44 by cane 
removed include macro and some comments

NEW file: dpm/parser/table.c(3.6)
dpm/parser/table.c: 3.6 92/08/19 14:06:36 by cane 
modified print_tables() : the default super pool access mode is supported

NEW file: dpm/parser/ultrix.mk(3.2)
dpm/parser/ultrix.mk: 3.2 92/09/21 14:56:08 by cane 
removed include macro and some comments

NEW file: dpm/parser/user.c(3.1)
dpm/parser/user.c: 3.1 92/06/16 18:26:56 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/dpm/aix.mk(3.2)
dpm/dpm/aix.mk: 3.2 92/09/21 14:45:11 by cane 
removed include macro

NEW file: dpm/dpm/apollo.mk(3.2)
dpm/dpm/apollo.mk: 3.2 92/09/21 14:46:04 by cane 
removed include macro and some comments

NEW file: dpm/dpm/disk.c(3.2)
dpm/dpm/disk.c: 3.2 92/07/30 10:10:13 by cane 
added #include <strutil.h>

NEW file: dpm/dpm/dosfgc.c(3.3)
dpm/dpm/dosfgc.c: 3.3 92/07/30 17:27:13 by cane 
added mountpath to the build_list(), gc_open_dir() and scandir_open() calls - added reply to the scandir_open() calls

NEW file: dpm/dpm/dosfget.c(3.8)
dpm/dpm/dosfget.c: 3.8 92/09/15 16:30:13 by cane 
modified issamelink() and symlinkop()

NEW file: dpm/dpm/dosfrm.c(3.4)
dpm/dpm/dosfrm.c: 3.4 92/09/15 16:29:38 by cane 
fixed the identity of the process before leaving dosfrm() 

NEW file: dpm/dpm/dpm.mk(3.7)
dpm/dpm/dpm.mk: 3.7 92/09/28 14:32:44 by cane 
both sfgc and sfgc2 are compiled

NEW file: dpm/dpm/dpmutil.c(3.11)
dpm/dpm/dpmutil.c: 3.11 92/09/04 15:20:00 by cane 
added a feature in getnfspaths() in case uid < 0 and gid < 0

NEW file: dpm/dpm/hp.mk(3.2)
dpm/dpm/hp.mk: 3.2 92/09/21 14:46:25 by cane 
removed include macro

NEW file: dpm/dpm/option.c(3.3)
dpm/dpm/option.c: 3.3 92/07/27 12:04:14 by cane 
removed getselectlock() that is replaced by get_select_name() in select.c

NEW file: dpm/dpm/scandir.c(3.3)
dpm/dpm/scandir.c: 3.3 92/07/30 17:28:34 by cane 
add reply to the scandir_open() call

NEW file: dpm/dpm/select.c(3.7)
dpm/dpm/select.c: 3.7 92/08/20 15:46:09 by cane 
include malloc.h removed from the Apollo Domain 

NEW file: dpm/dpm/sfdpmd.c(3.3)
dpm/dpm/sfdpmd.c: 3.3 92/09/28 15:03:22 by hemmer 
wait3() requires a union wait as 1st arg in Irix 4

NEW file: dpm/dpm/sfgc.c(3.8)
dpm/dpm/sfgc.c: 3.8 92/07/30 17:25:35 by cane 
added mountpath in the presfgc() and dosfgc() calls 

NEW file: dpm/dpm/sfget.c(3.5)
dpm/dpm/sfget.c: 3.5 92/09/04 15:15:27 by cane 
link option is now named (L)ink - fixed the symlinkop() call 

NEW file: dpm/dpm/sfrm.c(3.4)
dpm/dpm/sfrm.c: 3.4 92/09/04 15:16:36 by cane 
link option is now named (L)ink - fixed the exit code in case the option (L)ink is used

NEW file: dpm/dpm/sfrpc.c(3.2)
dpm/dpm/sfrpc.c: 3.2 92/07/30 10:16:27 by cane 
added #include <strutil.h>

NEW file: dpm/dpm/sfsh.c(3.5)
dpm/dpm/sfsh.c: 3.5 92/08/21 09:17:25 by cane 
added fflush() to synchronize output

NEW file: dpm/dpm/sgi.mk(3.3)
dpm/dpm/sgi.mk: 3.3 92/09/28 15:04:47 by hemmer 
Make Irix 4.0.5 happy.

NEW file: dpm/dpm/sun.mk(3.2)
dpm/dpm/sun.mk: 3.2 92/09/21 14:48:54 by cane 
removed include macro

NEW file: dpm/dpm/tmps.c(3.2)
dpm/dpm/tmps.c: 3.2 92/07/30 10:12:39 by cane 
added #include <strutil.h>

NEW file: dpm/dpm/ultrix.mk(3.2)
dpm/dpm/ultrix.mk: 3.2 92/09/21 14:49:29 by cane 
removed include macro

NEW file: dpm/dpm/sfrn.c(1.3)
dpm/dpm/sfrn.c: 1.3 92/06/25 14:51:51 by cane 
include <unistd.h> removed on the Apollo Domain

NEW file: dpm/dpm/sfmvfs(1.1)
dpm/dpm/sfmvfs: 1.1 92/06/24 15:05:26 by cane 
date and time created 92/06/24 15:05:26 by cane

NEW file: dpm/dpm/sflock.c.old(1.1)
dpm/dpm/sflock.c.old: 1.1 92/09/21 12:04:30 by cane 
date and time created 92/09/21 12:04:30 by cane

NEW file: dpm/dpm/sfgc2.c(1.23)
dpm/dpm/sfgc2.c: 1.23 92/09/28 15:03:24 by hemmer 
wait3() requires a union wait as 1st arg in Irix 4

NEW file: dpm/dpm/dpm.man(3.1)
dpm/dpm/dpm.man: 3.1 92/06/16 18:27:12 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/dpm/sfdpmd.man(3.1)
dpm/dpm/sfdpmd.man: 3.1 92/06/16 18:27:19 by cane 
SHIFT DPM Version 3.1

NEW file: dpm/dpm/sfoptions.man(3.1)
dpm/dpm/sfoptions.man: 3.1 92/06/16 18:27:20 by cane 
SHIFT DPM Version 3.1

************************ VERSION 1.2.16 *****************************
NEW file: ./aixesa.mk(1.1)
./aixesa.mk: 1.1 92/09/23 14:41:24 by baud 
date and time created 92/09/23 14:41:24 by baud

common/getfilep.c: 1.4 92/09/23 17:13:45 by baud 
AIXESA FVS appends undescore to entry point names

common/readc.c: 1.6 92/09/23 10:46:26 by baud 
AIXESA FVS appends undescore to entry point names

common/readf.F: 1.6 92/09/23 11:05:52 by baud 
split long lines, FVS does not accept code after column 72

common/common.mk: 1.12 92/09/25 11:51:38 by hemmer 
Use our own library rule, as default not portable.
Introduce SYSDEP_OBJS, for systems dependent library objects
to build. SYSDEP_OBJS will be defined in <arch>.mk's.

common/hp.mk: 1.2 92/09/25 15:10:08 by baud 
add routine getarg to interface to igetarg

NEW file: common/aixesa.mk(1.2)
common/aixesa.mk: 1.2 92/09/25 12:26:11 by baud 
add routines getarg and iargc

NEW file: common/iargc.s(1.1)
common/iargc.s: 1.1 92/09/25 12:26:36 by baud 
date and time created 92/09/25 12:26:36 by baud

NEW file: common/getarg.s(1.1)
common/getarg.s: 1.1 92/09/25 15:46:24 by baud 
date and time created 92/09/25 15:46:24 by baud

NEW file: common/getarghp.f(1.1)
common/getarghp.f: 1.1 92/09/25 15:04:41 by baud 
date and time created 92/09/25 15:04:41 by baud

doc/BUGLIST: 1.6 92/09/23 17:49:31 by hemmer 
C1214C0001 added.

examples/report.c: 1.6 92/09/25 16:02:47 by hemmer 
getrusage() is needed for hpux.

NEW file: examples/aixesa.mk(1.1)
examples/aixesa.mk: 1.1 92/09/23 14:54:50 by baud 
date and time created 92/09/23 14:54:50 by baud

h/rfio.h: 3.3 92/09/22 12:25:37 by baud 
modify #ifdefs for AIXESA

h/rfcntl.h: 1.5 92/09/22 12:24:50 by baud 
add #ifdefs for AIXESA

NEW file: h/aixesa.mk(1.1)
h/aixesa.mk: 1.1 92/09/22 17:15:39 by baud 
date and time created 92/09/22 17:15:39 by baud

NEW file: lib/aixesa.mk(1.1)
lib/aixesa.mk: 1.1 92/09/25 12:27:58 by baud 
date and time created 92/09/25 12:27:58 by baud

make/sgi.default: 1.4 92/09/25 14:29:03 by hemmer 
ARFLAGS now needed for new lib creation policy

make/hp.default: 1.2 92/09/25 14:50:34 by hemmer 
ARFLAGS now needed for new lib creation policy

NEW file: make/aixesa.default(1.2)
make/aixesa.default: 1.2 92/09/25 12:25:07 by baud 
defines ARFLAGS

msg/msgr.c: 1.7 92/09/22 12:29:59 by baud 
add definition of cuserid for AIXESA

msg/msg.mk: 1.9 92/09/24 15:19:08 by hemmer 
Use our own library rule, as default not portable.

msg/term.c: 1.6 92/09/25 08:36:37 by baud 
TIOCGWINSZ is now defined on HP-UX A.08.07

NEW file: msg/aixesa.mk(1.1)
msg/aixesa.mk: 1.1 92/09/23 10:38:01 by baud 
date and time created 92/09/23 10:38:01 by baud

tape/findpgrp.c: 1.7 92/09/22 13:55:14 by baud 
add code for AIXESA

tape/checkjobdied.c: 1.4 92/09/22 13:49:16 by baud 
add code for AIXESA

tape/getunitstat.c: 1.7 92/09/22 14:08:40 by baud 
add code for AIXESA

tape/mounttape.c: 1.25 92/09/23 08:45:18 by baud 
add code for AIXESA

tape/mounttape.c: 1.24 92/09/23 08:43:20 by baud 
lddisplay feature

tape/readlbl.c: 1.8 92/09/22 14:19:02 by baud 
add code for AIXESA

tape/rls.c: 1.11 92/09/22 14:22:00 by baud 
suppress definition of unused variable

tape/rwndtape.c: 1.4 92/09/22 14:24:33 by baud 
modify #ifdefs for AIXESA

tape/send2tpd.c: 1.5 92/09/22 14:36:12 by baud 
suppress definition of unused variable + add cast operations

tape/skiptape.c: 1.4 92/09/22 14:39:16 by baud 
modify #ifdefs for AIXESA

tape/tpdaemon.c: 1.31 92/09/23 09:27:46 by baud 
add code for AIXESA

tape/tpdaemon.c: 1.30 92/09/23 09:16:03 by baud 
lddisplay feature

tape/tplabel.c: 1.7 92/09/22 17:44:40 by baud 
suppress definition of unused variables

tape/tpmnt.c: 1.17 92/09/23 15:19:30 by baud 
check permissions for "path" only if non null

tape/tpmnt.c: 1.16 92/09/23 08:16:30 by baud 
increase repbuf size to receive correctly labelinfo

tape/tprstat.c: 1.4 92/09/25 16:23:38 by baud 
include <sys/types.h> because of dev_t, gid_t, ... in "tape.h"

tape/unldtape.c: 1.5 92/09/22 14:54:33 by baud 
modify #ifdefs for AIXESA

tape/wrttpmrk.c: 1.4 92/09/22 15:01:05 by baud 
modify #ifdefs for AIXESA

tape/tape.h: 1.23 92/09/22 14:47:54 by baud 
add variable needed for lddisplay feature

tape/tape.h: 1.22 92/09/22 14:44:15 by baud 
uses dev_t instead of int for majmin

tape/tape.mk: 1.17 92/09/22 14:50:40 by baud 
lddisplay feature

tape/dmpfil.c: 1.10 92/09/23 12:18:03 by baud 
limit blksiz to 65535 for AIX/ESA to avoid errno=22

tape/unloadtps.c: 1.7 92/09/22 14:57:34 by baud 
lddisplay feature

tape/tplabel.man: 1.2 92/09/25 13:55:02 by baud 
add densities 8200 and 8500 for Exabytes

tape/tpmnt.man: 1.5 92/09/25 13:55:36 by baud 
add densities 8200 and 8500 for Exabytes

tape/nextvol.c: 1.3 92/09/22 14:16:40 by baud 
increase repbuf size to receive correctly labelinfo

NEW file: tape/lddisplay.c(1.2)
tape/lddisplay.c: 1.2 92/09/25 14:54:27 by baud 
include <sys/types.h> because of dev_t, gid_t, ... in "tape.h"

NEW file: tape/aixesa.mk(1.1)
tape/aixesa.mk: 1.1 92/09/22 15:45:20 by baud 
date and time created 92/09/22 15:45:20 by baud

rfio/rfio_fcalls.c: 3.3 92/09/23 10:29:35 by baud 
add code for AIXESA

rfio/rfio_serv.c: 3.6 92/09/23 10:19:32 by baud 
add code for AIXESA

rfio/rfio_serv.c: 3.5 92/09/22 15:45:54 by hemmer 
Don't be more clever than needed : if -l is set, the logfile 
will be the default one (/usr/spool/rfiod.log), unless -f xxx is given

rfio/xyclose.c: 3.4 92/09/25 08:23:04 by baud 
Modifications to run on HP-UX machines

rfio/xyclose.c: 3.3 92/09/22 13:21:17 by baud 
AIXESA FVS appends undescore to entry point names

rfio/xyopen.c: 3.5 92/09/25 15:16:39 by hemmer 
enable xyopn for hpux

rfio/xyopen.c: 3.4 92/09/25 08:24:25 by baud 
Modifications to run on HP-UX machines

rfio/xyopen.c: 3.3 92/09/22 13:21:47 by baud 
AIXESA FVS appends undescore to entry point names

rfio/xyread.c: 3.4 92/09/25 08:25:46 by baud 
Modifications to run on HP-UX machines

rfio/xyread.c: 3.3 92/09/22 13:22:18 by baud 
AIXESA FVS appends undescore to entry point names

rfio/xywrite.c: 3.4 92/09/25 08:26:55 by baud 
Modifications to run on HP-UX machines

rfio/xywrite.c: 3.3 92/09/22 13:22:35 by baud 
AIXESA FVS appends undescore to entry point names

rfio/rfio.mk: 3.4 92/09/24 15:24:05 by hemmer 
Use our own library rule, as default not portable.

rfio/fortran.F: 3.5 92/09/24 11:18:20 by baud 
split long lines + read to eof to support APPEND mode on AIXESA

NEW file: rfio/aixesa.mk(1.1)
rfio/aixesa.mk: 1.1 92/09/23 14:40:25 by baud 
date and time created 92/09/23 14:40:25 by baud

rtcopy/rtcopyd.c: 2.11 92/09/22 13:29:16 by baud 
add code for AIXESA

rtcopy/tpread.c: 2.14 92/09/22 13:34:32 by baud 
modify #ifdefs for AIXESA

NEW file: rtcopy/aixesa.mk(1.1)
rtcopy/aixesa.mk: 1.1 92/09/23 14:40:55 by baud 
date and time created 92/09/23 14:40:55 by baud

NEW file: scripts/assign.aixesa(1.1)
scripts/assign.aixesa: 1.1 92/09/23 16:40:33 by baud 
date and time created 92/09/23 16:40:33 by baud

NEW file: scripts/aixesa.mk(1.1)
scripts/aixesa.mk: 1.1 92/09/23 17:46:55 by baud 
date and time created 92/09/23 17:46:55 by baud

sysreq/sysreqf.c: 1.12 92/09/22 16:24:53 by baud 
define UNIXF77 for AIXESA

sysreq/cray.mk: 1.9 92/09/24 15:28:21 by hemmer 
include default architecture dependent make rules

sysreq/sun.mk: 1.5 92/09/24 15:28:22 by hemmer 
include default architecture dependent make rules

sysreq/sysreq.mk: 1.8 92/09/24 15:29:56 by hemmer 
Use our own library rule, as default not portable.

sysreq/hp.mk: 1.2 92/09/24 15:28:20 by hemmer 
include default architecture dependent make rules

NEW file: sysreq/aixesa.mk(1.1)
sysreq/aixesa.mk: 1.1 92/09/22 17:07:45 by baud 
date and time created 92/09/22 17:07:45 by baud

tms/tmsdaemon.c: 1.14 92/09/22 15:24:38 by baud 
add cast operations and modify #ifdefs for AIXESA

tms/checkjobdied.c: 1.4 92/09/22 15:03:54 by baud 
add code for AIXESA

tms/tms.h: 1.4 92/09/28 08:53:59 by baud 
TMS is now on CEARN

tms/send2tmsd.c: 1.6 92/09/22 15:09:20 by baud 
add cast operations

tms/tms.mk: 1.5 92/09/22 15:15:18 by baud 
tmsdaemon must be suid to root to send privileged requests to TMS

NEW file: tms/aixesa.mk(1.1)
tms/aixesa.mk: 1.1 92/09/22 15:39:03 by baud 
date and time created 92/09/22 15:39:03 by baud

util/bsdinst.c: 1.4 92/09/23 08:21:51 by baud 
modify #ifdefs for AIXESA

NEW file: util/aixesa.mk(1.1)
util/aixesa.mk: 1.1 92/09/23 08:26:07 by baud 
date and time created 92/09/23 08:26:07 by baud

DELETED file : ./Makefile (1.22)
DELETED file : common/Makefile (1.7)
DELETED file : examples/Makefile (1.7)
DELETED file : h/Makefile (1.9)
DELETED file : lib/Makefile (1.5)
DELETED file : make/Makefile (1.5)
DELETED file : msg/Makefile (1.7)
DELETED file : tape/usrwrtlbl.c (1.11)
DELETED file : tape/usrwrtlbl.man (1.4)
DELETED file : rfio/Makefile (3.1)
DELETED file : rtcopy/Makefile (2.1)
DELETED file : scripts/Makefile (1.9)
DELETED file : sysreq/Makefile (1.6)
DELETED file : util/Makefile (1.3)
************************ VERSION 1.2.15 *****************************
doc/BUGLIST: 1.5 92/09/07 15:00:14 by hemmer 
close A129T0001

doc/BUGLIST: 1.4 92/09/07 12:23:29 by hemmer 
add/remove BUG id A1212M0002

h/h.mk: 1.5 92/09/15 15:15:18 by hemmer 
use mv, cp, chmod instead of install (not portable)

lib/lib.mk: 1.9 92/09/15 15:14:16 by hemmer 
use mv, cp, chmod instead of install (not portable)

msg/msg.mk: 1.8 92/09/15 15:16:40 by hemmer 
use mv, cp, chmod instead of install (not portable)

tape/dmpfil.c: 1.9 92/09/08 17:03:02 by baud 
correct tape occupation for Exabytes 8500

rtcopy/rtcopy.mk: 2.9 92/09/15 15:30:04 by hemmer 
 use mv, cp, chmod instead of install (not portable)

scripts/scripts.mk: 1.5 92/09/15 15:29:18 by hemmer 
use mv, cp, chmod instead of install (not portable)

************************ VERSION 1.2.14 *****************************
NEW file: examples/aix.mk(1.1)
examples/aix.mk: 1.1 92/08/12 16:01:30 by hemmer 
date and time created 92/08/12 16:01:30 by hemmer

msg/msgdaemon.c: 1.9 92/08/31 16:28:15 by root 
EINTR error from accept() should retry the accept()

tape/usrlbl.c: 1.3 92/08/24 14:34:43 by baud 
fix 2 bugs in checkeofeov: sets errno=ETLBLif needed and processes blp as nl tapes

rfio/lseek.c: 3.2 92/09/02 14:42:40 by hemmer 
Keep Irix 4.0.5 happy with missing static forward declaration

NEW file: scripts/assign.aix(1.1)
scripts/assign.aix: 1.1 92/08/12 16:01:11 by hemmer 
date and time created 92/08/12 16:01:11 by hemmer

NEW file: scripts/aix.mk(1.1)
scripts/aix.mk: 1.1 92/08/12 16:01:21 by hemmer 
date and time created 92/08/12 16:01:21 by hemmer

************************ VERSION 1.2.13 *****************************
common/log.c: 1.7 92/08/12 12:08:37 by hemmer 
print invoker actual pid, not at initlog time.

NEW file: doc/usenix92.ms(1.1)
doc/usenix92.ms: 1.1 92/08/10 14:39:13 by hemmer 
date and time created 92/08/10 14:39:13 by hemmer

rfio/rfio_serv.c: 3.4 92/08/12 12:10:03 by hemmer 
default log is now /usr/spool/rfiod.log
default log is set correctly if -f not specified || !syslog || !stderr
fork ourselves for sun & ultrix.

************************ VERSION 1.2.12 *****************************
doc/BUGLIST: 1.3 92/07/28 09:37:02 by hemmer 
closed A129M0001

NEW file: doc/refman.tex(1.1)
doc/refman.tex: 1.1 92/07/24 18:00:15 by hemmer 
date and time created 92/07/24 18:00:15 by hemmer

tape/tplabel.c: 1.6 92/07/31 11:36:59 by baud 
add ifdef TMS around getacct

tape/tpmnt.c: 1.15 92/07/31 11:37:33 by baud 
add ifdef TMS around getacct

tms/tmsactive.c: 1.3 92/07/31 11:26:05 by baud 
add hostname to the test string

tms/tmsreq.c: 1.6 92/07/31 11:26:42 by baud 
add hostname to the error message

tms/tsttmsexit.c: 1.3 92/07/29 17:27:38 by baud 
change default device group name to CART for CRAY

tms/tmsexit.c: 1.6 92/07/29 17:27:15 by baud 
change default device group name to CART for CRAY

tms/sun.mk: 1.5 92/07/31 11:27:27 by baud 
change SHD03 to SHIFT

************************ VERSION 1.2.11 *****************************
tape/rls.c: 1.10 92/07/24 09:52:55 by baud 
check write permission for files and directories (bug A1290001)

tape/tpmnt.c: 1.14 92/07/24 09:55:38 by baud 
check write permission for files and directories (bug A1290001)

tape/writelbl.c: 1.3 92/07/24 09:58:52 by baud 
returns nb of bytes written instead of 0 (needed for usrlbl 1.2)

tape/tape.h: 1.21 92/07/24 09:49:12 by baud 
add message TP038 - pathname too long

tape/tape.mk: 1.16 92/07/24 09:51:26 by baud 
add routine chkdirw

tape/nextvol.c: 1.2 92/07/24 09:56:14 by baud 
check write permission for files and directories (bug A1290001)

tape/savelabel.c: 1.2 92/07/24 09:54:04 by baud 
check write permission for files and directories (bug A1290001)

NEW file: tape/chkdirw.c(1.1)
tape/chkdirw.c: 1.1 92/07/24 09:56:57 by baud 
date and time created 92/07/24 09:56:57 by baud

************************ VERSION 1.2.10 *****************************
doc/BUGLIST: 1.2 92/07/15 13:25:53 by hemmer 
BUGNO A100D0001 closed, new BUGNOs A129T0001, A129M0001

msg/msgdaemon.c: 1.8 92/07/20 08:27:37 by hemmer 
Trap SIGCLD to avoid zombies creation

tape/getunitstat.c: 1.6 92/07/15 16:28:04 by baud 
fixed <sys/types.h> missing for AIX

************************ VERSION 1.2.9 *****************************
DELETED file : .RELEASE/1.1.0.files (1.1)
DELETED file : .RELEASE/1.2.1.files (1.1)
DELETED file : .RELEASE/1.2.1.changes (1.1)
DELETED file : .RELEASE/1.2.2.files (1.1)
DELETED file : .RELEASE/1.2.2.changes (1.1)
DELETED file : .RELEASE/1.2.3.files (1.1)
DELETED file : .RELEASE/1.2.3.changes (1.1)
DELETED file : .RELEASE/1.2.4.files (1.1)
DELETED file : .RELEASE/1.2.4.changes (1.1)
DELETED file : .RELEASE/1.2.5.files (1.1)
DELETED file : .RELEASE/1.2.5.changes (1.1)
DELETED file : .RELEASE/1.2.6.files (1.1)
DELETED file : .RELEASE/1.2.6.changes (1.1)
DELETED file : .RELEASE/1.2.7.files (1.1)
DELETED file : .RELEASE/1.2.7.changes (1.1)
DELETED file : util/newrel (1.7)
DELETED file : util/gensrc (1.1)
************************ VERSION 1.2.8 *****************************
util/newrel: 1.7 92/07/09 18:17:33 by hemmer 
report only the changes, not the last change from previous version
include this version in the x.x.x.files

************************ VERSION 1.2.7 *****************************
tape/getunitstat.c: 1.5 92/07/09 10:47:01 by hemmer 
fixed <sys/types.h> missing for ultrix

************************ VERSION 1.2.6 *****************************
rtcopy/rtcopy.shift: 2.13 92/07/07 15:47:17 by hemmer 
do not use TMS if /etc/operator/notmsdaemon exists

************************ VERSION 1.2.5 *****************************
tape/mounttape.c: 1.23 92/06/10 10:41:49 by baud 
operator messages will be retried in case of failure

tape/tape.h: 1.20 92/06/15 15:01:26 by baud 
increases full device name length to 31 characters(+ zero byte)

tape/tape.h: 1.19 92/06/10 10:38:18 by baud 
defines retry interval when sending operator messages

tape/sgi.mk: 1.7 92/06/10 10:44:15 by baud 
modify makefile for IRIX 4

rtcopy/rtcopy.shift: 2.12 92/06/16 15:12:22 by baud 
passes density information to tpmnt for all device groups (CART excepted)

************************ VERSION 1.2.4 *****************************
NEW file: util/gensrc(1.1)
util/gensrc: 1.1 92/06/05 15:30:52 by hemmer 
date and time created 92/06/05 15:30:52 by hemmer

************************ VERSION 1.2.3 *****************************
NEW file: util/make/ar.c(1.1)
util/make/ar.c: 1.1 92/06/05 14:59:09 by hemmer 
date and time created 92/06/05 14:59:09 by hemmer

NEW file: util/make/arscan.c(1.1)
util/make/arscan.c: 1.1 92/06/05 14:59:10 by hemmer 
date and time created 92/06/05 14:59:10 by hemmer

NEW file: util/make/arscan.c.orig(1.1)
util/make/arscan.c.orig: 1.1 92/06/05 14:59:10 by hemmer 
date and time created 92/06/05 14:59:10 by hemmer

NEW file: util/make/commands.c(1.1)
util/make/commands.c: 1.1 92/06/05 14:59:11 by hemmer 
date and time created 92/06/05 14:59:11 by hemmer

NEW file: util/make/commands.h(1.1)
util/make/commands.h: 1.1 92/06/05 14:59:11 by hemmer 
date and time created 92/06/05 14:59:11 by hemmer

NEW file: util/make/default.c(1.1)
util/make/default.c: 1.1 92/06/05 14:59:12 by hemmer 
date and time created 92/06/05 14:59:12 by hemmer

NEW file: util/make/dep.h(1.1)
util/make/dep.h: 1.1 92/06/05 14:59:13 by hemmer 
date and time created 92/06/05 14:59:13 by hemmer

NEW file: util/make/dir.c(1.1)
util/make/dir.c: 1.1 92/06/05 14:59:13 by hemmer 
date and time created 92/06/05 14:59:13 by hemmer

NEW file: util/make/default.c.orig(1.1)
util/make/default.c.orig: 1.1 92/06/05 14:59:12 by hemmer 
date and time created 92/06/05 14:59:12 by hemmer

NEW file: util/make/expand.c(1.1)
util/make/expand.c: 1.1 92/06/05 14:59:14 by hemmer 
date and time created 92/06/05 14:59:14 by hemmer

NEW file: util/make/file.c(1.1)
util/make/file.c: 1.1 92/06/05 14:59:14 by hemmer 
date and time created 92/06/05 14:59:14 by hemmer

NEW file: util/make/file.h(1.1)
util/make/file.h: 1.1 92/06/05 14:59:15 by hemmer 
date and time created 92/06/05 14:59:15 by hemmer

NEW file: util/make/function.c(1.1)
util/make/function.c: 1.1 92/06/05 14:59:15 by hemmer 
date and time created 92/06/05 14:59:15 by hemmer

NEW file: util/make/gpl.texinfo(1.1)
util/make/gpl.texinfo: 1.1 92/06/05 14:59:16 by hemmer 
date and time created 92/06/05 14:59:16 by hemmer

NEW file: util/make/implicit.c(1.1)
util/make/implicit.c: 1.1 92/06/05 14:59:17 by hemmer 
date and time created 92/06/05 14:59:17 by hemmer

NEW file: util/make/job.c(1.1)
util/make/job.c: 1.1 92/06/05 14:59:17 by hemmer 
date and time created 92/06/05 14:59:17 by hemmer

NEW file: util/make/job.h(1.1)
util/make/job.h: 1.1 92/06/05 14:59:18 by hemmer 
date and time created 92/06/05 14:59:18 by hemmer

NEW file: util/make/load.c(1.1)
util/make/load.c: 1.1 92/06/05 14:59:18 by hemmer 
date and time created 92/06/05 14:59:18 by hemmer

NEW file: util/make/main.c(1.1)
util/make/main.c: 1.1 92/06/05 14:59:19 by hemmer 
date and time created 92/06/05 14:59:19 by hemmer

NEW file: util/make/make.aux(1.1)
util/make/make.aux: 1.1 92/06/05 14:59:20 by hemmer 
date and time created 92/06/05 14:59:20 by hemmer

NEW file: util/make/make.cp(1.1)
util/make/make.cp: 1.1 92/06/05 14:59:20 by hemmer 
date and time created 92/06/05 14:59:20 by hemmer

NEW file: util/make/make.cps(1.1)
util/make/make.cps: 1.1 92/06/05 14:59:21 by hemmer 
date and time created 92/06/05 14:59:21 by hemmer

NEW file: util/make/tags(1.1)
util/make/tags: 1.1 92/06/05 14:59:34 by hemmer 
date and time created 92/06/05 14:59:34 by hemmer

NEW file: util/make/make.fn(1.1)
util/make/make.fn: 1.1 92/06/05 14:59:21 by hemmer 
date and time created 92/06/05 14:59:21 by hemmer

NEW file: util/make/make.fns(1.1)
util/make/make.fns: 1.1 92/06/05 14:59:22 by hemmer 
date and time created 92/06/05 14:59:22 by hemmer

NEW file: util/make/make.h(1.1)
util/make/make.h: 1.1 92/06/05 14:59:22 by hemmer 
date and time created 92/06/05 14:59:22 by hemmer

NEW file: util/make/make.h.orig(1.1)
util/make/make.h.orig: 1.1 92/06/05 14:59:23 by hemmer 
date and time created 92/06/05 14:59:23 by hemmer

NEW file: util/make/make.ky(1.1)
util/make/make.ky: 1.1 92/06/05 14:59:24 by hemmer 
date and time created 92/06/05 14:59:24 by hemmer

NEW file: util/make/make.kys(1.1)
util/make/make.kys: 1.1 92/06/05 14:59:24 by hemmer 
date and time created 92/06/05 14:59:24 by hemmer

NEW file: util/make/make.man(1.1)
util/make/make.man: 1.1 92/06/05 14:59:25 by hemmer 
date and time created 92/06/05 14:59:25 by hemmer

NEW file: util/make/make.pg(1.1)
util/make/make.pg: 1.1 92/06/05 14:59:25 by hemmer 
date and time created 92/06/05 14:59:25 by hemmer

NEW file: util/make/make.pgs(1.1)
util/make/make.pgs: 1.1 92/06/05 14:59:26 by hemmer 
date and time created 92/06/05 14:59:26 by hemmer

NEW file: util/make/make.texinfo(1.1)
util/make/make.texinfo: 1.1 92/06/05 14:59:26 by hemmer 
date and time created 92/06/05 14:59:26 by hemmer

NEW file: util/make/make.toc(1.1)
util/make/make.toc: 1.1 92/06/05 14:59:28 by hemmer 
date and time created 92/06/05 14:59:28 by hemmer

NEW file: util/make/make.tp(1.1)
util/make/make.tp: 1.1 92/06/05 14:59:28 by hemmer 
date and time created 92/06/05 14:59:28 by hemmer

NEW file: util/make/make.tps(1.1)
util/make/make.tps: 1.1 92/06/05 14:59:28 by hemmer 
date and time created 92/06/05 14:59:28 by hemmer

NEW file: util/make/make.vr(1.1)
util/make/make.vr: 1.1 92/06/05 14:59:29 by hemmer 
date and time created 92/06/05 14:59:29 by hemmer

NEW file: util/make/make.vrs(1.1)
util/make/make.vrs: 1.1 92/06/05 14:59:29 by hemmer 
date and time created 92/06/05 14:59:29 by hemmer

NEW file: util/make/misc.c(1.1)
util/make/misc.c: 1.1 92/06/05 14:59:30 by hemmer 
date and time created 92/06/05 14:59:30 by hemmer

NEW file: util/make/read.c(1.1)
util/make/read.c: 1.1 92/06/05 14:59:30 by hemmer 
date and time created 92/06/05 14:59:30 by hemmer

NEW file: util/make/remake.c(1.1)
util/make/remake.c: 1.1 92/06/05 14:59:31 by hemmer 
date and time created 92/06/05 14:59:31 by hemmer

NEW file: util/make/remote-stub.c(1.1)
util/make/remote-stub.c: 1.1 92/06/05 14:59:32 by hemmer 
date and time created 92/06/05 14:59:32 by hemmer

NEW file: util/make/remote.c(1.1)
util/make/remote.c: 1.1 92/06/05 14:59:32 by hemmer 
date and time created 92/06/05 14:59:32 by hemmer

NEW file: util/make/remote-cstms.c(1.1)
util/make/remote-cstms.c: 1.1 92/06/05 14:59:31 by hemmer 
date and time created 92/06/05 14:59:31 by hemmer

NEW file: util/make/rule.c(1.1)
util/make/rule.c: 1.1 92/06/05 14:59:33 by hemmer 
date and time created 92/06/05 14:59:33 by hemmer

NEW file: util/make/rule.h(1.1)
util/make/rule.h: 1.1 92/06/05 14:59:33 by hemmer 
date and time created 92/06/05 14:59:33 by hemmer

NEW file: util/make/texinfo.tex(1.1)
util/make/texinfo.tex: 1.1 92/06/05 14:59:34 by hemmer 
date and time created 92/06/05 14:59:34 by hemmer

NEW file: util/make/variable.c(1.1)
util/make/variable.c: 1.1 92/06/05 14:59:35 by hemmer 
date and time created 92/06/05 14:59:35 by hemmer

NEW file: util/make/variable.h(1.1)
util/make/variable.h: 1.1 92/06/05 14:59:36 by hemmer 
date and time created 92/06/05 14:59:36 by hemmer

NEW file: util/make/version.c(1.1)
util/make/version.c: 1.1 92/06/05 14:59:36 by hemmer 
date and time created 92/06/05 14:59:36 by hemmer

NEW file: util/make/vpath.c(1.1)
util/make/vpath.c: 1.1 92/06/05 14:59:36 by hemmer 
date and time created 92/06/05 14:59:36 by hemmer

NEW file: util/make/CHANGES(1.1)
util/make/CHANGES: 1.1 92/06/05 15:00:31 by hemmer 
date and time created 92/06/05 15:00:31 by hemmer

NEW file: util/make/COPYING(1.1)
util/make/COPYING: 1.1 92/06/05 15:00:31 by hemmer 
date and time created 92/06/05 15:00:31 by hemmer

NEW file: util/make/ChangeLog(1.1)
util/make/ChangeLog: 1.1 92/06/05 15:00:32 by hemmer 
date and time created 92/06/05 15:00:32 by hemmer

NEW file: util/make/Makefile(1.1)
util/make/Makefile: 1.1 92/06/05 15:00:33 by hemmer 
date and time created 92/06/05 15:00:33 by hemmer

NEW file: util/make/Makefile.orig(1.1)
util/make/Makefile.orig: 1.1 92/06/05 15:00:34 by hemmer 
date and time created 92/06/05 15:00:34 by hemmer

NEW file: util/make/README(1.1)
util/make/README: 1.1 92/06/05 15:00:34 by hemmer 
date and time created 92/06/05 15:00:34 by hemmer

NEW file: util/make/TAGS(1.1)
util/make/TAGS: 1.1 92/06/05 15:00:35 by hemmer 
date and time created 92/06/05 15:00:35 by hemmer

NEW file: util/make/glob/COPYING.LIB(1.1)
util/make/glob/COPYING.LIB: 1.1 92/06/05 15:00:03 by hemmer 
date and time created 92/06/05 15:00:03 by hemmer

NEW file: util/make/glob/Makefile(1.1)
util/make/glob/Makefile: 1.1 92/06/05 15:00:03 by hemmer 
date and time created 92/06/05 15:00:03 by hemmer

NEW file: util/make/glob/fnmatch.c(1.1)
util/make/glob/fnmatch.c: 1.1 92/06/05 15:00:04 by hemmer 
date and time created 92/06/05 15:00:04 by hemmer

NEW file: util/make/glob/fnmatch.h(1.1)
util/make/glob/fnmatch.h: 1.1 92/06/05 15:00:04 by hemmer 
date and time created 92/06/05 15:00:04 by hemmer

NEW file: util/make/glob/glob.c(1.1)
util/make/glob/glob.c: 1.1 92/06/05 15:00:05 by hemmer 
date and time created 92/06/05 15:00:05 by hemmer

NEW file: util/make/glob/glob.h(1.1)
util/make/glob/glob.h: 1.1 92/06/05 15:00:05 by hemmer 
date and time created 92/06/05 15:00:05 by hemmer

************************ VERSION 1.2.1 *****************************
First version using the NEWREL tool. Matching current 1.2 version
NEW file: ./Makefile(1.22)
./Makefile: 1.22 92/04/08 18:58:44 by hemmer 
add ioperfdist (makes use of genrel).

NEW file: ./cray.mk(1.12)
./cray.mk: 1.12 91/07/25 10:34:40 by hemmer 
forgot to include make/cray.default

NEW file: ./sgi.mk(1.13)
./sgi.mk: 1.13 91/07/25 11:39:26 by hemmer 
include make/<arch>.default

NEW file: ./sun.mk(1.9)
./sun.mk: 1.9 91/06/27 15:27:03 by hemmer 
moved system dependencies in make/*.default

NEW file: ./CONTRIBUTORS(1.1)
./CONTRIBUTORS: 1.1 91/02/11 10:20:03 by hemmer 
date and time created 91/02/11 10:20:03 by hemmer

NEW file: ./MANIFEST(1.2)
./MANIFEST: 1.2 91/02/25 16:45:57 by hemmer 
update for rtcopy, msg, scripts

NEW file: ./README(1.6)
./README: 1.6 91/06/27 15:31:44 by hemmer 
comment on SGI increase of Ultra devices

NEW file: ./shift.mk(1.13)
./shift.mk: 1.13 91/09/12 13:32:18 by hemmer 
lib should be first !!!

NEW file: ./ultrix.mk(1.6)
./ultrix.mk: 1.6 91/07/25 11:39:29 by hemmer 
include make/<arch>.default

NEW file: ./apollo.mk(1.5)
./apollo.mk: 1.5 91/10/21 09:59:28 by hemmer 
Remove Ultra linkage. Its future is uncertain on DN10K/Domain OS

NEW file: ./hp.mk(1.1)
./hp.mk: 1.1 91/11/18 13:21:42 by baud 
date and time created 91/11/18 13:21:42 by baud

NEW file: ./aix.mk(1.2)
./aix.mk: 1.2 92/03/04 08:59:40 by ashok 
first version of aix.mk AK

NEW file: common/Makefile(1.7)
common/Makefile: 1.7 91/06/07 15:17:26 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: common/cray.mk(1.15)
common/cray.mk: 1.15 91/06/11 17:34:37 by hemmer 
Default is now UniCOS 6.0

NEW file: common/sgi.mk(1.11)
common/sgi.mk: 1.11 92/06/01 11:22:53 by hemmer 
Irix 4.0.1 support, because of buggy NIS function prototypes.

NEW file: common/sun.mk(1.9)
common/sun.mk: 1.9 91/04/29 14:50:15 by hemmer 
New makefile defaults

NEW file: common/getconfent.c(1.6)
common/getconfent.c: 1.6 91/07/02 17:41:59 by hemmer 
make PATCHY happy (only 80 character long source lines)

NEW file: common/getfilep.c(1.3)
common/getfilep.c: 1.3 92/03/04 10:17:05 by ashok 
changes for AIX AK

NEW file: common/log.c(1.6)
common/log.c: 1.6 92/04/07 09:17:14 by baud 
add ifdef for AIX

NEW file: common/readc.c(1.5)
common/readc.c: 1.5 92/03/04 10:26:43 by ashok 
changes for AIX AK

NEW file: common/serror.c(1.13)
common/serror.c: 1.13 91/09/02 17:39:05 by hemmer 
SYSREQ host communication error added

NEW file: common/socket.c(1.13)
common/socket.c: 1.13 92/04/06 10:10:25 by hemmer 
REALLY disable read() timeout (READTIMEOUT was still #defined !)

NEW file: common/readf.F(1.5)
common/readf.F: 1.5 92/03/04 10:23:19 by ashok 
changes for AIX AK

NEW file: common/ferror.sc(1.1)
common/ferror.sc: 1.1 91/02/08 18:57:38 by hemmer 
date and time created 91/02/08 18:57:38 by hemmer

NEW file: common/getifnam.c(1.8)
common/getifnam.c: 1.8 92/03/04 14:11:53 by ashok 
changes for AIX AK

NEW file: common/compat.c(1.1)
common/compat.c: 1.1 91/03/15 12:03:08 by hemmer 
date and time created 91/03/15 12:03:08 by hemmer

NEW file: common/ultrix.mk(1.4)
common/ultrix.mk: 1.4 91/05/02 15:03:08 by hemmer 
add YP for ultrix

NEW file: common/segment.c(1.4)
common/segment.c: 1.4 91/03/15 12:01:52 by hemmer 
auto segmentation switching

NEW file: common/apollo.mk(1.1)
common/apollo.mk: 1.1 91/04/30 16:51:44 by hemmer 
date and time created 91/04/30 16:51:44 by hemmer

NEW file: common/ypgetacct.c(1.4)
common/ypgetacct.c: 1.4 92/06/01 11:22:24 by hemmer 
CAST needed for Irix 4.0.1, defining call as (void *).

NEW file: common/setnetio.c(1.3)
common/setnetio.c: 1.3 91/06/25 11:01:05 by hemmer 
remove calls to getifnam() if MINBLOCKSIZE not defined

NEW file: common/trace.c(1.2)
common/trace.c: 1.2 91/07/02 17:42:05 by hemmer 
make PATCHY happy (only 80 character long source lines)

NEW file: common/common.mk(1.11)
common/common.mk: 1.11 91/06/19 15:19:58 by hemmer 
allow MINBLOCKSIZE not to be defines

NEW file: common/getacct.c(1.4)
common/getacct.c: 1.4 91/07/02 17:42:01 by hemmer 
make PATCHY happy (only 80 character long source lines)

NEW file: common/account.man(1.1)
common/account.man: 1.1 91/08/13 13:34:22 by trannoy 
date and time created 91/08/13 13:34:22 by trannoy

NEW file: common/getacct.man(1.1)
common/getacct.man: 1.1 91/08/13 13:30:40 by trannoy 
date and time created 91/08/13 13:30:40 by trannoy

NEW file: common/log.man(1.1)
common/log.man: 1.1 91/08/10 17:52:32 by trannoy 
date and time created 91/08/10 17:52:32 by trannoy

NEW file: common/hp.mk(1.1)
common/hp.mk: 1.1 91/11/18 13:41:47 by baud 
date and time created 91/11/18 13:41:47 by baud

NEW file: common/getconfent.man(1.1)
common/getconfent.man: 1.1 91/08/10 17:52:24 by trannoy 
date and time created 91/08/10 17:52:24 by trannoy

NEW file: common/aix.mk(1.2)
common/aix.mk: 1.2 92/03/04 10:55:52 by ashok 
changes for AIX AK

NEW file: doc/tech.bulletin(1.2)
doc/tech.bulletin: 1.2 91/07/15 17:10:35 by hemmer 
BUG 005

NEW file: examples/Makefile(1.7)
examples/Makefile: 1.7 91/06/07 15:17:38 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: examples/cray.mk(1.6)
examples/cray.mk: 1.6 91/04/30 16:52:06 by hemmer 


NEW file: examples/sgi.mk(1.7)
examples/sgi.mk: 1.7 91/04/30 16:52:08 by hemmer 


NEW file: examples/sun.mk(1.2)
examples/sun.mk: 1.2 91/04/30 16:52:10 by hemmer 


NEW file: examples/diskperf.b.c(1.4)
examples/diskperf.b.c: 1.4 91/06/11 17:36:53 by hemmer 
rfio.h should always be included last

NEW file: examples/diskperf.c(1.3)
examples/diskperf.c: 1.3 91/05/15 15:03:38 by hemmer 
RFIO VERSION 2

NEW file: examples/report.c(1.5)
examples/report.c: 1.5 92/06/01 15:00:34 by hemmer 
getrusage() defined in IRIX 4.0.1.

NEW file: examples/rfcp.c(1.5)
examples/rfcp.c: 1.5 91/09/13 19:07:41 by hemmer 
how could it work ? use fstat(), not stat().

NEW file: examples/rfstat.c(1.3)
examples/rfstat.c: 1.3 91/05/15 15:03:42 by hemmer 
RFIO VERSION 2

NEW file: examples/read.d.u.f(1.1)
examples/read.d.u.f: 1.1 91/02/11 10:08:15 by hemmer 
date and time created 91/02/11 10:08:15 by hemmer

NEW file: examples/readdsk.f(1.1)
examples/readdsk.f: 1.1 91/02/11 10:08:16 by hemmer 
date and time created 91/02/11 10:08:16 by hemmer

NEW file: examples/write.a.f(1.1)
examples/write.a.f: 1.1 91/02/11 10:08:18 by hemmer 
date and time created 91/02/11 10:08:18 by hemmer

NEW file: examples/write.d.f(1.1)
examples/write.d.f: 1.1 91/02/11 10:08:19 by hemmer 
date and time created 91/02/11 10:08:19 by hemmer

NEW file: examples/writedsk.f(1.1)
examples/writedsk.f: 1.1 91/02/11 10:08:20 by hemmer 
date and time created 91/02/11 10:08:20 by hemmer

NEW file: examples/ultrix.mk(1.2)
examples/ultrix.mk: 1.2 91/04/30 16:52:11 by hemmer 


NEW file: examples/sysreqf.F(1.2)
examples/sysreqf.F: 1.2 91/07/02 17:38:35 by hemmer 
some hidden long space lines made PATCHY unhappy

NEW file: examples/apollo.mk(1.2)
examples/apollo.mk: 1.2 91/05/28 15:53:26 by hemmer 
Apollo/Ultra support

NEW file: examples/examples.mk(1.4)
examples/examples.mk: 1.4 91/12/06 16:24:10 by trannoy 
Add OPTLIBS.

NEW file: examples/hp.mk(1.1)
examples/hp.mk: 1.1 91/11/22 08:59:29 by trannoy 
date and time created 91/11/22 08:59:29 by trannoy

NEW file: h/log.h(1.2)
h/log.h: 1.2 91/09/03 18:33:41 by hemmer 
correct SCCSID

NEW file: h/marshall.h(1.2)
h/marshall.h: 1.2 91/05/24 17:30:30 by trannoy 
add cast in ntohs(),ntohl(),htons() and htonl() - A Trannoy

NEW file: h/osdep.h(1.3)
h/osdep.h: 1.3 91/05/17 18:13:24 by hemmer 
new sccs string

NEW file: h/patchlevel.h(1.2)
h/patchlevel.h: 1.2 91/09/03 18:34:06 by hemmer 
correct SCCSID, document global change log.

NEW file: h/rfio.h(3.2)
h/rfio.h: 3.2 92/03/04 10:41:34 by ashok 
changes for AIX AK

NEW file: h/serrno.h(1.11)
h/serrno.h: 1.11 91/09/02 17:37:36 by hemmer 
Add SYSREQ communication error code

NEW file: h/sysreq.h(1.4)
h/sysreq.h: 1.4 91/09/02 17:37:34 by hemmer 
Add SYSREQ communication error code

NEW file: h/Makefile(1.9)
h/Makefile: 1.9 91/06/07 16:13:58 by hemmer 
add -k for srcdev in sccs get

NEW file: h/trace.h(1.2)
h/trace.h: 1.2 91/05/05 18:05:16 by hemmer 


NEW file: h/apollo.mk(1.1)
h/apollo.mk: 1.1 91/05/15 16:25:21 by hemmer 
date and time created 91/05/15 16:25:21 by hemmer

NEW file: h/cray.mk(1.1)
h/cray.mk: 1.1 91/05/15 16:25:22 by hemmer 
date and time created 91/05/15 16:25:22 by hemmer

NEW file: h/h.mk(1.4)
h/h.mk: 1.4 91/09/06 11:59:10 by trannoy 
Replace $< by $? in the install rule. ( Did not work at least on sun )

NEW file: h/sgi.mk(1.1)
h/sgi.mk: 1.1 91/05/15 16:25:24 by hemmer 
date and time created 91/05/15 16:25:24 by hemmer

NEW file: h/sun.mk(1.1)
h/sun.mk: 1.1 91/05/15 16:25:25 by hemmer 
date and time created 91/05/15 16:25:25 by hemmer

NEW file: h/ultrix.mk(1.1)
h/ultrix.mk: 1.1 91/05/15 16:25:26 by hemmer 
date and time created 91/05/15 16:25:26 by hemmer

NEW file: h/rfcntl.h(1.4)
h/rfcntl.h: 1.4 92/03/04 10:37:00 by ashok 
changes for AIX AK

NEW file: h/shift.h(1.1)
h/shift.h: 1.1 91/09/03 18:59:05 by hemmer 
date and time created 91/09/03 18:59:05 by hemmer

NEW file: h/hp.mk(1.1)
h/hp.mk: 1.1 91/11/22 08:56:09 by trannoy 
date and time created 91/11/22 08:56:09 by trannoy

NEW file: h/aix.mk(1.1)
h/aix.mk: 1.1 92/03/04 10:32:46 by ashok 
date and time created 92/03/04 10:32:46 by ashok

NEW file: lib/cray.mk(1.5)
lib/cray.mk: 1.5 91/09/03 17:57:40 by hemmer 
include architectur dependent make defaults (../make/xxx.default)

NEW file: lib/sgi.mk(1.8)
lib/sgi.mk: 1.8 91/09/03 17:57:42 by hemmer 
include architectur dependent make defaults (../make/xxx.default)

NEW file: lib/sun.mk(1.7)
lib/sun.mk: 1.7 91/09/03 17:57:44 by hemmer 
include architectur dependent make defaults (../make/xxx.default)

NEW file: lib/Makefile(1.5)
lib/Makefile: 1.5 91/06/07 15:17:53 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: lib/ultrix.mk(1.4)
lib/ultrix.mk: 1.4 91/09/03 17:57:46 by hemmer 
include architectur dependent make defaults (../make/xxx.default)

NEW file: lib/lib.mk(1.8)
lib/lib.mk: 1.8 91/12/06 15:52:51 by trannoy 
FORCE was defined, let's use it !

NEW file: lib/apollo.mk(1.1)
lib/apollo.mk: 1.1 91/04/30 16:54:10 by hemmer 
date and time created 91/04/30 16:54:10 by hemmer

NEW file: lib/hp.mk(1.1)
lib/hp.mk: 1.1 91/11/18 13:42:17 by baud 
date and time created 91/11/18 13:42:17 by baud

NEW file: lib/aix.mk(1.1)
lib/aix.mk: 1.1 92/03/04 10:45:11 by ashok 
date and time created 92/03/04 10:45:11 by ashok

NEW file: make/cray.default(1.4)
make/cray.default: 1.4 91/10/03 10:50:59 by trannoy 
make handles correctly .F files; unnecessary rules were removed.

NEW file: make/sgi.default(1.3)
make/sgi.default: 1.3 91/07/25 11:20:06 by hemmer 
SHELL variable in machine specific code now so that top level building is no more required

NEW file: make/sun.default(1.4)
make/sun.default: 1.4 91/09/11 17:54:19 by hemmer 
cc is now the default for sun

NEW file: make/Makefile(1.5)
make/Makefile: 1.5 91/06/07 15:17:57 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: make/apollo.default(1.8)
make/apollo.default: 1.8 91/09/15 13:55:32 by trannoy 
Nothing needs to be compiled with the ftn FORTRAN compiler in the library as well as on the server side.

NEW file: make/ultrix.default(1.4)
make/ultrix.default: 1.4 91/07/25 11:20:08 by hemmer 
SHELL variable in machine specific code now so that top level building is no more required

NEW file: make/hp.default(1.1)
make/hp.default: 1.1 91/11/18 13:41:05 by baud 
date and time created 91/11/18 13:41:05 by baud

NEW file: make/aix.default(1.1)
make/aix.default: 1.1 92/03/04 10:54:17 by ashok 
date and time created 92/03/04 10:54:17 by ashok

NEW file: msg/Makefile(1.7)
msg/Makefile: 1.7 91/06/07 15:18:13 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: msg/sgi.mk(1.8)
msg/sgi.mk: 1.8 91/06/18 12:09:43 by trannoy 
Change libraries linked to oper.o to correct bug on SGI ( does not accept any input )

NEW file: msg/sun.mk(1.7)
msg/sun.mk: 1.7 91/06/18 12:09:45 by trannoy 
Change libraries linked to oper.o to correct bug on SGI ( does not accept any input )

NEW file: msg/msg.h(1.4)
msg/msg.h: 1.4 91/03/06 10:02:35 by hemmer 
better error handling, oper improvements ....

NEW file: msg/infd.c(1.7)
msg/infd.c: 1.7 92/03/16 10:25:57 by baud 
includes <time.h> instead of <sys/time.h> to define tm structure

NEW file: msg/msg.c(1.7)
msg/msg.c: 1.7 91/09/10 16:13:51 by trannoy 
Include strings.h instead of string.h on apollo machines.

NEW file: msg/msgd.c(1.8)
msg/msgd.c: 1.8 92/05/06 10:29:56 by baud 
includes <time.h> instead of <sys/time.h> to define tm structure

NEW file: msg/msgdaemon.c(1.7)
msg/msgdaemon.c: 1.7 92/04/21 10:20:22 by baud 
open/close logs for every message

NEW file: msg/msgdb.c(1.5)
msg/msgdb.c: 1.5 91/04/02 16:00:28 by hemmer 
New interface required by Mr Jean-Philippe Baud

NEW file: msg/msgr.c(1.6)
msg/msgr.c: 1.6 91/04/29 14:09:16 by hemmer 
add originator in msg string

NEW file: msg/rep.c(1.4)
msg/rep.c: 1.4 91/03/06 10:02:46 by hemmer 
better error handling, oper improvements ....

NEW file: msg/ultrix.mk(1.3)
msg/ultrix.mk: 1.3 91/06/18 12:09:48 by trannoy 
Change libraries linked to oper.o to correct bug on SGI ( does not accept any input )

NEW file: msg/msg.mk(1.7)
msg/msg.mk: 1.7 92/05/12 12:07:37 by baud 
add OPERCONFIG configuration file

NEW file: msg/term.c(1.5)
msg/term.c: 1.5 91/11/27 10:40:51 by trannoy 
Remove a debugging message.

NEW file: msg/oper.c(1.9)
msg/oper.c: 1.9 92/05/12 12:06:50 by baud 
add configuration file and scrolling input window

NEW file: msg/cray.mk(1.2)
msg/cray.mk: 1.2 91/06/18 12:09:38 by trannoy 
Change libraries linked to oper.o to correct bug on SGI ( does not accept any input )

NEW file: msg/apollo.mk(1.3)
msg/apollo.mk: 1.3 91/06/18 12:09:36 by trannoy 
Change libraries linked to oper.o to correct bug on SGI ( does not accept any input )

NEW file: msg/tpmstat.c(1.5)
msg/tpmstat.c: 1.5 92/03/16 10:26:26 by baud 
includes <time.h> instead of <sys/time.h> to define tm structure

NEW file: msg/msgdaemon.man(1.1)
msg/msgdaemon.man: 1.1 91/08/13 09:22:00 by trannoy 
date and time created 91/08/13 09:22:00 by trannoy

NEW file: msg/oper.man(1.2)
msg/oper.man: 1.2 92/05/12 12:08:07 by baud 
add configuration file and scrolling input window

NEW file: msg/msgr.man(1.1)
msg/msgr.man: 1.1 91/08/13 09:02:00 by trannoy 
date and time created 91/08/13 09:02:00 by trannoy

NEW file: msg/rep.man(1.1)
msg/rep.man: 1.1 91/08/13 09:19:24 by trannoy 
date and time created 91/08/13 09:19:24 by trannoy

NEW file: msg/tpmstat.man(1.1)
msg/tpmstat.man: 1.1 91/08/13 09:24:57 by trannoy 
date and time created 91/08/13 09:24:57 by trannoy

NEW file: msg/msgd.man(1.1)
msg/msgd.man: 1.1 91/08/13 09:09:19 by trannoy 
date and time created 91/08/13 09:09:19 by trannoy

NEW file: msg/hp.mk(1.1)
msg/hp.mk: 1.1 91/11/18 13:44:12 by baud 
date and time created 91/11/18 13:44:12 by baud

NEW file: msg/aix.mk(1.1)
msg/aix.mk: 1.1 92/03/10 15:54:57 by baud 
date and time created 92/03/10 15:54:57 by baud

NEW file: tape/asc2ebc.c(1.1)
tape/asc2ebc.c: 1.1 91/08/13 15:48:57 by baud 
date and time created 91/08/13 15:48:57 by baud

NEW file: tape/buildhdrlbl.c(1.3)
tape/buildhdrlbl.c: 1.3 92/03/10 14:10:30 by baud 
add support for multivolume

NEW file: tape/buildvollbl.c(1.2)
tape/buildvollbl.c: 1.2 92/05/27 12:09:44 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/ebc2asc.c(1.1)
tape/ebc2asc.c: 1.1 91/08/13 15:49:00 by baud 
date and time created 91/08/13 15:49:00 by baud

NEW file: tape/findpgrp.c(1.6)
tape/findpgrp.c: 1.6 92/05/27 11:56:02 by baud 
uses uid_t, gid_t instead of int

NEW file: tape/checkjobdied.c(1.3)
tape/checkjobdied.c: 1.3 92/03/09 17:17:21 by baud 
add code for AIX

NEW file: tape/getunitstat.c(1.4)
tape/getunitstat.c: 1.4 92/03/10 14:31:53 by baud 
add code for AIX

NEW file: tape/mounttape.c(1.22)
tape/mounttape.c: 1.22 92/05/27 11:28:23 by baud 
suppress declaration for getpwuid and uses uid_t, gid_t instead of int

NEW file: tape/posittape.c(1.10)
tape/posittape.c: 1.10 92/03/10 13:52:28 by baud 
cleanup code

NEW file: tape/readlbl.c(1.7)
tape/readlbl.c: 1.7 92/05/27 12:10:11 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/reserv.c(1.3)
tape/reserv.c: 1.3 92/05/27 12:10:39 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/rls.c(1.9)
tape/rls.c: 1.9 92/04/07 13:21:04 by baud 
add option -k

NEW file: tape/rwndtape.c(1.3)
tape/rwndtape.c: 1.3 92/03/10 14:32:32 by baud 
add code for AIX

NEW file: tape/send2tpd.c(1.4)
tape/send2tpd.c: 1.4 92/03/09 17:24:00 by baud 
add ifdef for AIX

NEW file: tape/sendrep.c(1.5)
tape/sendrep.c: 1.5 92/05/27 10:57:02 by baud 
unlink named pipe if open returns ENXIO (client disappeared)

NEW file: tape/usrwrtlbl.c(1.11)
tape/usrwrtlbl.c: 1.11 92/03/10 13:39:41 by baud 
uses standard posit. routines but special tplogit

NEW file: tape/skiptape.c(1.3)
tape/skiptape.c: 1.3 92/03/10 14:32:47 by baud 
add code for AIX

NEW file: tape/reserv.man(1.1)
tape/reserv.man: 1.1 91/09/06 10:21:53 by baud 
date and time created 91/09/06 10:21:53 by baud

NEW file: tape/tpconfig.c(1.3)
tape/tpconfig.c: 1.3 92/05/27 12:10:53 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/tpdaemon.c(1.29)
tape/tpdaemon.c: 1.29 92/05/27 14:49:38 by baud 
selects correct device using the density parameter. Also put the request in wfuq if requested specific device is not free.

NEW file: tape/tplabel.c(1.5)
tape/tplabel.c: 1.5 92/05/27 13:51:55 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/tplogit.c(1.3)
tape/tplogit.c: 1.3 91/11/21 17:02:09 by baud 
add jid to the log entries

NEW file: tape/tpmnt.c(1.13)
tape/tpmnt.c: 1.13 92/03/10 14:12:32 by baud 
add support for multivolume

NEW file: tape/tprstat.c(1.3)
tape/tprstat.c: 1.3 92/05/27 11:35:04 by baud 
suppress declaration for getpwuid

NEW file: tape/tpstat.c(1.5)
tape/tpstat.c: 1.5 92/05/27 11:35:31 by baud 
suppress declaration for getpwuid

NEW file: tape/unldtape.c(1.4)
tape/unldtape.c: 1.4 92/03/10 14:33:22 by baud 
add code for AIX

NEW file: tape/writelbl.c(1.2)
tape/writelbl.c: 1.2 92/05/27 12:10:28 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/wrttpmrk.c(1.3)
tape/wrttpmrk.c: 1.3 92/03/10 14:33:32 by baud 
add code for AIX

NEW file: tape/tape.h(1.18)
tape/tape.h: 1.18 92/05/27 11:49:15 by baud 
uses uid_t, gid_t instead of int

NEW file: tape/tape.mk(1.15)
tape/tape.mk: 1.15 92/03/16 14:31:43 by baud 
-o parameter is ignored for compile step of cc on AIX

NEW file: tape/sun.mk(1.6)
tape/sun.mk: 1.6 92/01/20 16:38:42 by baud 
include machine.default files

NEW file: tape/sgi.mk(1.6)
tape/sgi.mk: 1.6 92/01/20 16:38:28 by baud 
include machine.default files

NEW file: tape/ultrix.mk(1.6)
tape/ultrix.mk: 1.6 92/01/20 16:38:55 by baud 
include machine.default files

NEW file: tape/dmpfil.c(1.8)
tape/dmpfil.c: 1.8 92/03/10 14:40:58 by baud 
suppress ioctl(MTIOCGET not supported by AIX

NEW file: tape/rls.man(1.3)
tape/rls.man: 1.3 92/03/10 13:31:51 by baud 
add option -k

NEW file: tape/tpconfig.man(1.1)
tape/tpconfig.man: 1.1 91/09/06 10:22:26 by baud 
date and time created 91/09/06 10:22:26 by baud

NEW file: tape/unloadtps.c(1.6)
tape/unloadtps.c: 1.6 92/05/27 11:56:21 by baud 
uses uid_t, gid_t instead of int

NEW file: tape/tplabel.man(1.1)
tape/tplabel.man: 1.1 91/09/06 10:22:37 by baud 
date and time created 91/09/06 10:22:37 by baud

NEW file: tape/tpmnt.man(1.4)
tape/tpmnt.man: 1.4 91/12/05 08:49:39 by baud 
document more error codes

NEW file: tape/tprstat.man(1.1)
tape/tprstat.man: 1.1 91/09/06 10:40:17 by baud 
date and time created 91/09/06 10:40:17 by baud

NEW file: tape/usrwrtlbl.man(1.4)
tape/usrwrtlbl.man: 1.4 91/09/17 15:54:14 by baud 
save fseq in .tplabel and make an entry even for nl tapes

NEW file: tape/tpstat.man(1.1)
tape/tpstat.man: 1.1 91/09/06 10:26:47 by baud 
date and time created 91/09/06 10:26:47 by baud

NEW file: tape/cray.mk(1.4)
tape/cray.mk: 1.4 92/01/20 16:38:06 by baud 
include machine.default files

NEW file: tape/hp.mk(1.2)
tape/hp.mk: 1.2 92/01/20 16:38:17 by baud 
include machine.default files

NEW file: tape/dumptape.man(1.1)
tape/dumptape.man: 1.1 91/10/21 09:24:04 by baud 
date and time created 91/10/21 09:24:04 by baud

NEW file: tape/apollo.mk(1.4)
tape/apollo.mk: 1.4 92/01/20 16:37:38 by baud 
include machine.default files

NEW file: tape/dumptape.sh(1.2)
tape/dumptape.sh: 1.2 91/11/28 12:19:07 by baud 
pass -b parameter to dmpfil

NEW file: tape/nextvol.c(1.1)
tape/nextvol.c: 1.1 92/03/10 14:11:14 by baud 
date and time created 92/03/10 14:11:14 by baud

NEW file: tape/aix.mk(1.1)
tape/aix.mk: 1.1 92/03/09 17:16:56 by baud 
date and time created 92/03/09 17:16:56 by baud

NEW file: tape/usrtplogit.c(1.2)
tape/usrtplogit.c: 1.2 92/05/27 12:11:05 by baud 
include <sys/types.h> needed for uid_t, gid_t in tape.h

NEW file: tape/savelabel.c(1.1)
tape/savelabel.c: 1.1 92/03/10 14:11:39 by baud 
date and time created 92/03/10 14:11:39 by baud

NEW file: tape/usrlbl.c(1.2)
tape/usrlbl.c: 1.2 92/04/03 15:24:21 by baud 
1st try of writing EOV2 on Desktop SPARC & SPARC System 600 returns 0

NEW file: tape/usrlbl.man(1.1)
tape/usrlbl.man: 1.1 92/04/01 17:25:25 by baud 
date and time created 92/04/01 17:25:25 by baud

NEW file: rfio/close.c(3.1)
rfio/close.c: 3.1 91/12/06 14:24:38 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/connect.c(3.2)
rfio/connect.c: 3.2 92/03/25 11:01:40 by hemmer 
connect() failures must close() the socket

NEW file: rfio/error.c(3.1)
rfio/error.c: 3.1 91/12/06 14:24:41 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/fclose.c(3.1)
rfio/fclose.c: 3.1 91/12/06 14:24:42 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/fopen.c(3.1)
rfio/fopen.c: 3.1 91/12/06 14:24:43 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/fread.c(3.2)
rfio/fread.c: 3.2 92/03/20 12:06:33 by ashok 
formula for items cal. in remote case was wrong AK

NEW file: rfio/fstat.c(3.2)
rfio/fstat.c: 3.2 92/02/27 10:05:05 by ashok 
changed && to || in test for local file;changed order of marshall
for remote file to make it compatible with rfiodaemon . Ashok Kumar 27/02/92

NEW file: rfio/fwrite.c(3.2)
rfio/fwrite.c: 3.2 92/05/13 11:01:25 by ashok 
formula for items cal. in remote case was wrong AK

NEW file: rfio/lun2fn.c(3.1)
rfio/lun2fn.c: 3.1 91/12/06 14:24:48 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/misc.c(3.1)
rfio/misc.c: 3.1 91/12/06 14:24:49 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/open.c(3.1)
rfio/open.c: 3.1 91/12/06 16:51:01 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/parse.c(3.1)
rfio/parse.c: 3.1 91/12/06 14:24:52 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/read.c(3.3)
rfio/read.c: 3.3 92/06/01 11:47:26 by hemmer 
Irix 4.0.1 loader would not detect rfio_preread() forward 
reference if not declared !

NEW file: rfio/rfio_calls.c(3.2)
rfio/rfio_calls.c: 3.2 92/02/26 12:05:37 by ashok 
made stat call compatible with open call so filename can be any size
Ashok Kumar 26/02/92

NEW file: rfio/rfio_fcalls.c(3.2)
rfio/rfio_fcalls.c: 3.2 92/03/04 11:13:49 by ashok 
changes for AIX AK

NEW file: rfio/rfio_serv.c(3.3)
rfio/rfio_serv.c: 3.3 92/06/01 11:33:09 by hemmer 
remove statement not reached.

NEW file: rfio/stat.c(3.2)
rfio/stat.c: 3.2 92/02/26 11:56:37 by ashok 
made the code compatible with open call so filenamecan be any length
Ashok Kumar 26/02/92

NEW file: rfio/write.c(3.1)
rfio/write.c: 3.1 91/12/06 14:25:02 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/xyclose.c(3.2)
rfio/xyclose.c: 3.2 92/03/04 11:16:57 by ashok 
changes for AIX AK

NEW file: rfio/xyopen.c(3.2)
rfio/xyopen.c: 3.2 92/03/04 11:20:59 by ashok 
changes for AIX AK

NEW file: rfio/xyread.c(3.2)
rfio/xyread.c: 3.2 92/03/04 11:23:18 by ashok 
changes for AIX AK

NEW file: rfio/xywrite.c(3.2)
rfio/xywrite.c: 3.2 92/03/04 11:25:10 by ashok 
changes for AIX AK

NEW file: rfio/apollo.mk(3.1)
rfio/apollo.mk: 3.1 91/12/06 14:25:09 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/cray.mk(3.1)
rfio/cray.mk: 3.1 91/12/06 14:25:10 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/rfio.mk(3.3)
rfio/rfio.mk: 3.3 92/04/03 16:31:26 by hemmer 
conditional compilation of fortran support.

NEW file: rfio/sgi.mk(3.1)
rfio/sgi.mk: 3.1 91/12/06 14:25:12 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/sun.mk(3.1)
rfio/sun.mk: 3.1 91/12/06 14:25:13 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/ultrix.mk(3.1)
rfio/ultrix.mk: 3.1 91/12/06 14:25:14 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/Makefile(3.1)
rfio/Makefile: 3.1 91/12/06 14:25:16 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/fortran.F(3.4)
rfio/fortran.F: 3.4 92/03/04 11:06:48 by ashok 
changes for AIX AK

NEW file: rfio/lseek.c(3.1)
rfio/lseek.c: 3.1 91/12/06 15:36:22 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/rfiod.man(3.1)
rfio/rfiod.man: 3.1 91/12/06 14:25:19 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/fflush.c(3.1)
rfio/fflush.c: 3.1 91/12/06 14:25:21 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/feof.c(3.1)
rfio/feof.c: 3.1 91/12/06 14:25:22 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/ferror.c(3.1)
rfio/ferror.c: 3.1 91/12/06 14:25:23 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/hp.mk(3.1)
rfio/hp.mk: 3.1 91/12/06 14:25:24 by trannoy 
New version of rfio with read ahead and preseek operations.

NEW file: rfio/preseek.c(3.2)
rfio/preseek.c: 3.2 92/03/04 11:11:49 by ashok 
changes for AIX AK

NEW file: rfio/aix.mk(1.1)
rfio/aix.mk: 1.1 92/03/04 11:00:54 by ashok 
date and time created 92/03/04 11:00:54 by ashok

NEW file: rtcopy/Makefile(2.1)
rtcopy/Makefile: 2.1 91/07/17 10:59:33 by trannoy 


NEW file: rtcopy/rtcopyd.c(2.10)
rtcopy/rtcopyd.c: 2.10 92/04/15 10:02:54 by baud 
add ifdefs for AIX

NEW file: rtcopy/scantp.c(2.2)
rtcopy/scantp.c: 2.2 91/07/25 13:07:49 by trannoy 
Modify return codes

NEW file: rtcopy/tpread.c(2.13)
rtcopy/tpread.c: 2.13 92/06/01 11:37:36 by hemmer 
getgrgid already declared in <pwd.h>

NEW file: rtcopy/dktotp.f(2.1)
rtcopy/dktotp.f: 2.1 91/07/17 11:00:54 by trannoy 
New release version. C code replacing Fortran.

NEW file: rtcopy/tptodk.f(2.1)
rtcopy/tptodk.f: 2.1 91/07/17 11:00:57 by trannoy 
New release version. C code replacing Fortran.

NEW file: rtcopy/cray.mk(2.2)
rtcopy/cray.mk: 2.2 91/08/14 15:38:01 by trannoy 
Re-introduce @(#)HISTORY	1.181 11/11/99 which were lost in a previous version

NEW file: rtcopy/sgi.mk(2.1)
rtcopy/sgi.mk: 2.1 91/08/14 14:57:45 by trannoy 
Add server part to the script

NEW file: rtcopy/sun.mk(2.2)
rtcopy/sun.mk: 2.2 91/08/14 14:55:43 by trannoy 
Delete obsolete comments.

NEW file: rtcopy/rtcopy.awk(2.2)
rtcopy/rtcopy.awk: 2.2 91/08/14 15:39:44 by trannoy 
Re-introduce @(#)HISTORY	1.181 11/11/99 which were lost in a previous version

NEW file: rtcopy/rtcopy.h(2.3)
rtcopy/rtcopy.h: 2.3 91/10/07 11:07:57 by trannoy 
Add more precise return code for getinfo()

NEW file: rtcopy/hp.mk(1.2)
rtcopy/hp.mk: 1.2 91/12/07 14:40:45 by trannoy 
The server side has not been ported yet.

NEW file: rtcopy/ultrix.mk(2.1)
rtcopy/ultrix.mk: 2.1 91/07/17 09:36:13 by trannoy 
SUN running as server

NEW file: rtcopy/rtcopy.mk(2.8)
rtcopy/rtcopy.mk: 2.8 91/12/11 17:26:05 by trannoy 
Integrating a better error handling with tpio.c 

NEW file: rtcopy/apollo.mk(2.2)
rtcopy/apollo.mk: 2.2 91/08/14 15:40:44 by trannoy 
Re-introduce @(#)HISTORY	1.181 11/11/99 which were lost in a previous version

NEW file: rtcopy/tptime.c(2.1)
rtcopy/tptime.c: 2.1 91/07/17 11:01:11 by trannoy 
New release version. C code replacing Fortran.

NEW file: rtcopy/tptodk.c(2.1)
rtcopy/tptodk.c: 2.1 91/07/17 11:01:13 by trannoy 
New release version. C code replacing Fortran.

NEW file: rtcopy/rtcopyd.man(1.1)
rtcopy/rtcopyd.man: 1.1 91/08/13 09:33:19 by trannoy 
date and time created 91/08/13 09:33:19 by trannoy

NEW file: rtcopy/tpread.man(1.1)
rtcopy/tpread.man: 1.1 91/08/13 10:19:11 by trannoy 
date and time created 91/08/13 10:19:11 by trannoy

NEW file: rtcopy/aix.mk(1.1)
rtcopy/aix.mk: 1.1 92/03/16 12:16:36 by baud 
date and time created 92/03/16 12:16:36 by baud

NEW file: rtcopy/tpio.c(1.3)
rtcopy/tpio.c: 1.3 92/04/15 10:07:10 by baud 
add ifdefs for AIX

NEW file: rtcopy/rtcopy.cray(2.9)
rtcopy/rtcopy.cray: 2.9 92/02/28 15:49:14 by boissat 
problem fixed in calling sysreq

NEW file: rtcopy/rtcopy.shift(2.11)
rtcopy/rtcopy.shift: 2.11 92/02/28 15:50:32 by boissat 
problem fixed in calling sysreq

NEW file: rtcopy/tptodkF.c(2.7)
rtcopy/tptodkF.c: 2.7 91/12/11 17:26:09 by trannoy 
Integrating a better error handling with tpio.c 

NEW file: rtcopy/tptodkU.c(2.7)
rtcopy/tptodkU.c: 2.7 91/12/11 17:26:12 by trannoy 
Integrating a better error handling with tpio.c 

NEW file: rtcopy/dktotpF.c(2.10)
rtcopy/dktotpF.c: 2.10 91/12/11 17:26:15 by trannoy 
Integrating a better error handling with tpio.c 

NEW file: rtcopy/dktotpU.c(2.10)
rtcopy/dktotpU.c: 2.10 91/12/11 17:26:19 by trannoy 
Integrating a better error handling with tpio.c 

NEW file: rtcopy/label.c(2.9)
rtcopy/label.c: 2.9 91/09/02 15:35:16 by trannoy 
Correcting a bug appearing when writing a no labeled tape.

NEW file: scripts/Makefile(1.9)
scripts/Makefile: 1.9 91/06/07 15:18:39 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: scripts/cray.mk(1.5)
scripts/cray.mk: 1.5 91/05/15 16:26:31 by hemmer 


NEW file: scripts/sgi.mk(1.5)
scripts/sgi.mk: 1.5 91/05/15 16:50:27 by hemmer 
support assign different for different cpus

NEW file: scripts/sun.mk(1.4)
scripts/sun.mk: 1.4 91/05/15 16:50:30 by hemmer 
support assign different for different cpus

NEW file: scripts/stagein(1.6)
scripts/stagein: 1.6 92/02/07 12:02:02 by les 


NEW file: scripts/stageout(1.8)
scripts/stageout: 1.8 91/10/08 15:47:25 by les 
Ooops! Left out the @(#)HISTORY	1.18111/11/99 !

NEW file: scripts/scripts.mk(1.4)
scripts/scripts.mk: 1.4 91/04/29 18:32:44 by hemmer 


NEW file: scripts/ultrix.mk(1.2)
scripts/ultrix.mk: 1.2 91/05/15 16:50:33 by hemmer 
support assign different for different cpus

NEW file: scripts/apollo.mk(1.2)
scripts/apollo.mk: 1.2 91/05/15 16:50:24 by hemmer 
support assign different for different cpus

NEW file: scripts/assign.apollo(1.3)
scripts/assign.apollo: 1.3 91/06/02 21:19:28 by les 
Various corrections

NEW file: scripts/assign.sgi(1.2)
scripts/assign.sgi: 1.2 91/06/02 21:42:34 by les 
Correction to tr syntax

NEW file: scripts/assign.sun(1.3)
scripts/assign.sun: 1.3 91/06/02 21:17:16 by les 
Correction to tr syntax

NEW file: scripts/assign.ultrix(1.3)
scripts/assign.ultrix: 1.3 91/06/02 21:24:46 by les 
Fix syntax on tr

NEW file: scripts/hp.mk(1.1)
scripts/hp.mk: 1.1 91/11/22 08:58:12 by trannoy 
date and time created 91/11/22 08:58:12 by trannoy

NEW file: sysreq/Makefile(1.6)
sysreq/Makefile: 1.6 91/06/07 15:18:49 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: sysreq/netreq.c(1.9)
sysreq/netreq.c: 1.9 92/05/27 13:15:24 by baud 
suppress explicit declaration for getpwuid

NEW file: sysreq/sysreq.c(1.6)
sysreq/sysreq.c: 1.6 91/07/02 15:34:41 by hemmer 
yet another make PATCHY happy

NEW file: sysreq/sysreqc.c(1.6)
sysreq/sysreqc.c: 1.6 91/07/02 15:30:03 by hemmer 
yet another make PATCHY happu

NEW file: sysreq/sysreqf.c(1.11)
sysreq/sysreqf.c: 1.11 91/07/02 18:15:44 by hemmer 
VMS does not like continuation in #if cpp statements

NEW file: sysreq/xdr.c(1.12)
sysreq/xdr.c: 1.12 91/08/24 12:03:41 by hemmer 
The wrong way around for previous workaraound !

NEW file: sysreq/cray.mk(1.8)
sysreq/cray.mk: 1.8 91/04/26 15:12:34 by hemmer 
remove unncessary -O flags in arch-dep makefiles

NEW file: sysreq/sgi.mk(1.8)
sysreq/sgi.mk: 1.8 91/09/11 09:31:48 by hemmer 
Aaaargghh!. Still probs in libraries !

NEW file: sysreq/sun.mk(1.4)
sysreq/sun.mk: 1.4 91/04/26 15:12:37 by hemmer 
remove unncessary -O flags in arch-dep makefiles

NEW file: sysreq/config.h(1.2)
sysreq/config.h: 1.2 91/05/17 13:53:34 by hemmer 
change sccs id header

NEW file: sysreq/README.VMS(1.3)
sysreq/README.VMS: 1.3 91/05/17 18:43:39 by hemmer 
update doc

NEW file: sysreq/sysreq.mk(1.7)
sysreq/sysreq.mk: 1.7 92/05/27 14:22:31 by hemmer 
BUGGY install rule.

NEW file: sysreq/ultrix.mk(1.2)
sysreq/ultrix.mk: 1.2 91/04/26 15:12:39 by hemmer 
remove unncessary -O flags in arch-dep makefiles

NEW file: sysreq/apollo.mk(1.3)
sysreq/apollo.mk: 1.3 91/05/28 17:14:29 by hemmer 


NEW file: sysreq/make_tgv.com(1.2)
sysreq/make_tgv.com: 1.2 91/07/02 15:30:07 by hemmer 
yet another make PATCHY happu

NEW file: sysreq/make_twg.com(1.2)
sysreq/make_twg.com: 1.2 91/07/02 15:30:08 by hemmer 
yet another make PATCHY happu

NEW file: sysreq/sysreq.man(1.1)
sysreq/sysreq.man: 1.1 91/08/10 17:54:12 by trannoy 
date and time created 91/08/10 17:54:12 by trannoy

NEW file: sysreq/sysreqd.man(1.1)
sysreq/sysreqd.man: 1.1 91/08/10 17:54:22 by trannoy 
date and time created 91/08/10 17:54:22 by trannoy

NEW file: sysreq/hp.mk(1.1)
sysreq/hp.mk: 1.1 91/11/18 13:46:04 by baud 
date and time created 91/11/18 13:46:04 by baud

NEW file: sysreq/aix.mk(1.1)
sysreq/aix.mk: 1.1 92/03/16 10:42:35 by baud 
date and time created 92/03/16 10:42:35 by baud

NEW file: tms/notms.c(1.2)
tms/notms.c: 1.2 91/10/31 17:44:30 by baud 
includes fcntl.h instead of sys/fcntl.h or sys/file.h

NEW file: tms/sendrep.c(1.5)
tms/sendrep.c: 1.5 92/05/27 09:28:40 by baud 
unlink named pipe if open returns ENXIO (client disappeared)

NEW file: tms/tmsdaemon.c(1.13)
tms/tmsdaemon.c: 1.13 92/05/27 10:20:33 by baud 
daemon was crashing if buffer size = multiple of req size and buffer was full

NEW file: tms/checkjobdied.c(1.3)
tms/checkjobdied.c: 1.3 92/03/10 11:26:54 by baud 
add code for AIX

NEW file: tms/tms.h(1.3)
tms/tms.h: 1.3 91/10/14 16:50:29 by baud 
add message "not registred in account file"

NEW file: tms/tmsactive.c(1.2)
tms/tmsactive.c: 1.2 91/09/02 16:29:22 by baud 
print correct system instead of CRAY in test message

NEW file: tms/send2tmsd.c(1.5)
tms/send2tmsd.c: 1.5 92/03/10 11:27:18 by baud 
add ifdef for AIX

NEW file: tms/tmslogit.c(1.2)
tms/tmslogit.c: 1.2 91/10/31 17:44:50 by baud 
includes fcntl.h instead of sys/fcntl.h or sys/file.h

NEW file: tms/tmsreq.c(1.5)
tms/tmsreq.c: 1.5 92/06/01 14:38:47 by hemmer 
Irix 4.0.1 requires <stdio.h> BEFORE <pwd.h>

NEW file: tms/tmstat.c(1.2)
tms/tmstat.c: 1.2 91/10/31 17:45:44 by baud 
includes fcntl.h instead of sys/fcntl.h or sys/file.h

NEW file: tms/tsttmsexit.c(1.2)
tms/tsttmsexit.c: 1.2 91/11/13 10:47:47 by baud 
includes fcntl.h instead of sys/fcntl.h or sys/file.h

NEW file: tms/sgi.mk(1.4)
tms/sgi.mk: 1.4 91/11/01 17:20:06 by baud 
generate libtms.a to be used by tape software

NEW file: tms/tms.mk(1.4)
tms/tms.mk: 1.4 91/11/01 15:49:48 by baud 
generate libtms.a to be used by tape software

NEW file: tms/tmsexit.c(1.5)
tms/tmsexit.c: 1.5 92/05/27 11:21:06 by baud 
suppress declaration for getpwuid and uses uid_t, gid_t instead of int

NEW file: tms/sun.mk(1.4)
tms/sun.mk: 1.4 91/11/01 15:50:00 by baud 
generate libtms.a to be used by tape software

NEW file: tms/cray.mk(1.1)
tms/cray.mk: 1.1 91/10/21 16:04:46 by hemmer 
date and time created 91/10/21 16:04:46 by hemmer

NEW file: tms/ultrix.mk(1.4)
tms/ultrix.mk: 1.4 91/11/01 17:20:17 by baud 
generate libtms.a to be used by tape software

NEW file: tms/tmsreq.man(1.1)
tms/tmsreq.man: 1.1 91/09/06 10:54:03 by baud 
date and time created 91/09/06 10:54:03 by baud

NEW file: tms/tmstat.man(1.1)
tms/tmstat.man: 1.1 91/09/06 10:54:17 by baud 
date and time created 91/09/06 10:54:17 by baud

NEW file: tms/hp.mk(1.1)
tms/hp.mk: 1.1 91/11/01 17:21:10 by baud 
date and time created 91/11/01 17:21:10 by baud

NEW file: tms/apollo.mk(1.2)
tms/apollo.mk: 1.2 91/11/01 17:19:53 by baud 
generate libtms.a to be used by tape software

NEW file: tms/aix.mk(1.1)
tms/aix.mk: 1.1 92/03/10 11:25:25 by baud 
date and time created 92/03/10 11:25:25 by baud

NEW file: util/apollo.mk(1.3)
util/apollo.mk: 1.3 91/05/28 17:42:57 by hemmer 
apollo support

NEW file: util/cray.mk(1.2)
util/cray.mk: 1.2 91/04/30 10:59:54 by hemmer 


NEW file: util/sgi.mk(1.3)
util/sgi.mk: 1.3 91/04/30 11:01:10 by hemmer 


NEW file: util/sun.mk(1.2)
util/sun.mk: 1.2 91/04/30 10:59:56 by hemmer 


NEW file: util/ultrix.mk(1.2)
util/ultrix.mk: 1.2 91/04/30 10:59:58 by hemmer 


NEW file: util/util.mk(1.5)
util/util.mk: 1.5 91/05/03 09:26:03 by hemmer 


NEW file: util/Makefile(1.3)
util/Makefile: 1.3 91/06/07 15:18:54 by hemmer 
add new target "srcdev" for Source Development Distribution

NEW file: util/bsdinst.c(1.3)
util/bsdinst.c: 1.3 92/03/04 11:57:51 by ashok 
changes for AIX AK

NEW file: util/apold(1.5)
util/apold: 1.5 91/09/18 09:25:41 by trannoy 
Replace bind by /com/bind

NEW file: util/chk80.c(1.1)
util/chk80.c: 1.1 91/08/26 13:52:42 by hemmer 
date and time created 91/08/26 13:52:42 by hemmer

NEW file: util/hp.mk(1.1)
util/hp.mk: 1.1 91/11/18 13:35:09 by baud 
date and time created 91/11/18 13:35:09 by baud

NEW file: util/aix.mk(1.2)
util/aix.mk: 1.2 92/05/12 12:19:12 by ashok 


NEW file: util/genrel(1.2)
util/genrel: 1.2 92/04/08 18:55:43 by hemmer 
Prefix the -m message with module name.

NEW file: util/newrel(1.6)
util/newrel: 1.6 92/06/05 09:21:32 by hemmer 
Reorganize I catchers.

NEW file: commands/newacct.c(1.1)
commands/newacct.c: 1.1 92/06/04 18:16:54 by hemmer 
date and time created 92/06/04 18:16:54 by hemmer

NEW file: commands/newacct.man(1.1)
commands/newacct.man: 1.1 92/06/04 18:16:55 by hemmer 
date and time created 92/06/04 18:16:55 by hemmer

***************** INITIAL EMPTY VERSION 1.1.0 **********************
/*
 * @(#)HISTORY	1.181 11/11/99 CERN CN-SW/DC Frederic Hemmer
 *
 * Copyright (C) 1990,1991 by CERN/CN/SW/DC
 * All rights reserved
 */
