|Red Hat Enterprise Linux 4: Introduction to System Administration|
|Prev||Chapter 3. Bandwidth and Processing Power||Next|
Often known as CPU power, CPU cycles, and various other names, processing power is the ability of a computer to manipulate data. Processing power varies with the architecture (and clock speed) of the CPU — usually CPUs with higher clock speeds and those supporting larger word sizes have more processing power than slower CPUs supporting smaller word sizes.
Here are the two main facts about processing power that you should keep in mind:
Processing power is fixed
Processing power cannot be stored
Processing power is fixed, in that the CPU can only go so fast. For example, if you need to add two numbers together (an operation that takes only one machine instruction on most architectures), a particular CPU can do it at one speed, and one speed only. With few exceptions, it is not even possible to slow the rate at which a CPU processes instructions, much less increase it.
Processing power is also fixed in another way: it is finite. That is, there are limits to the types of CPUs that can be plugged into any given computer. Some systems are capable of supporting a wide range of CPUs of differing speeds, while others may not be upgradeable at all.
Processing power cannot be stored for later use. In other words, if a CPU can process 100 million instructions in one second, one second of idle time equals 100 million instructions worth of processing that have been wasted.
If we take these facts and examine them from a slightly different perspective, a CPU "produces" a stream of executed instructions at a fixed rate. And if the CPU "produces" executed instructions, that means that something else must "consume" them. The next section defines these consumers.
There are two main consumers of processing power:
The operating system itself
The most obvious consumers of processing power are the applications and programs you want the computer to run for you. From a spreadsheet to a database, applications are the reason you have a computer.
A single-CPU system can only do one thing at any given time. Therefore, if your application is running, everything else on the system is not. And the opposite is, of course, true — if something other than your application is running, then your application is doing nothing.
But how is it that many different applications can seemingly run at once under a modern operating system? The answer is that these are multitasking operating systems. In other words, they create the illusion that many different things are going on simultaneously when in fact that is not possible. The trick is to give each process a fraction of a second's worth of time running on the CPU before giving the CPU to another process for the next fraction of a second. If these context switches happen frequently enough, the illusion of multiple applications running simultaneously is achieved.
Of course, applications do other things than manipulate data using the CPU. They may wait for user input as well as performing I/O to devices such as disk drives and graphics displays. When these events take place, the application no longer needs the CPU. At these times, the CPU can be used for other processes running other applications without slowing the waiting application at all.
In addition, the CPU can be used by another consumer of processing power: the operating system itself.
It is difficult to determine how much processing power is consumed by the operating system. The reason for this is that operating systems use a mixture of process-level and system-level code to perform their work. While, for example, it is easy to use a process monitor to determine what the process running a daemon or service is doing, it is not so easy to determine how much processing power is being consumed by system-level I/O-related processing (which is normally done within the context of the process requesting the I/O.)
In general, it is possible to divide this kind of operating system overhead into two types:
Operating system housekeeping
Operating system housekeeping includes activities such as process scheduling and memory management, while process-related activities include any processes that support the operating system itself, such as processes handling system-wide event logging or I/O cache flushing.
When there is insufficient processing power available for the work needing to be done, you have two options:
Reducing the load
Increasing the capacity
Reducing the CPU load is something that can be done with no expenditure of money. The trick is to identify those aspects of the system load under your control that can be cut back. There are three areas to focus on:
Reducing operating system overhead
Reducing application overhead
Eliminating applications entirely
To reduce operating system overhead, you must examine your current system load and determine what aspects of it result in inordinate amounts of overhead. These areas could include:
Reducing the need for frequent process scheduling
Reducing the amount of I/O performed
Do not expect miracles; in a reasonably-well configured system, it is unlikely to notice much of a performance increase by trying to reduce operating system overhead. This is due to the fact that a reasonably-well configured system, by definition, results in a minimal amount of overhead. However, if your system is running with too little RAM for instance, you may be able to reduce overhead by alleviating the RAM shortage.
Reducing application overhead means making sure the application has everything it needs to run well. Some applications exhibit wildly different behaviors under different environments — an application may become highly compute-bound while processing certain types of data, but not others, for example.
The point to keep in mind here is that you must understand the applications running on your system if you are to enable them to run as efficiently as possible. Often this entails working with your users, and/or your organization's developers, to help uncover ways in which the applications can be made to run more efficiently.
Depending on your organization, this approach might not be available to you, as it often is not a system administrator's responsibility to dictate which applications will and will not be run. However, if you can identify any applications that are known "CPU hogs", you might be able to influence the powers-that-be to retire them.
Doing this will likely involve more than just yourself. The affected users should certainly be a part of this process; in many cases they may have the knowledge and the political power to make the necessary changes to the application lineup.
Keep in mind that an application may not need to be eliminated from every system in your organization. You might be able to move a particularly CPU-hungry application from an overloaded system to another system that is nearly idle.
Of course, if it is not possible to reduce the demand for processing power, you must find ways of increasing the processing power that is available. To do so costs money, but it can be done.
The most straightforward approach is to determine if your system's CPU can be upgraded. The first step is to determine if the current CPU can be removed. Some systems (primarily laptops) have CPUs that are soldered in place, making an upgrade impossible. The rest, however, have socketed CPUs, making upgrades possible — at least in theory.
Next, you must do some research to determine if a faster CPU exists for your system configuration. For example, if you currently have a 1GHz CPU, and a 2GHz unit of the same type exists, an upgrade might be possible.
Finally, you must determine the maximum clock speed supported by your system. To continue the example above, even if a 2GHz CPU of the proper type exists, a simple CPU swap is not an option if your system only supports processors running at 1GHz or below.
Should you find that you cannot install a faster CPU in your system, your options may be limited to changing motherboards or even the more expensive forklift upgrade mentioned earlier.
However, some system configurations make a slightly different approach possible. Instead of replacing the current CPU, why not just add another one?
Symmetric multiprocessing (also known as SMP) makes it possible for a computer system to have more than one CPU sharing all system resources. This means that, unlike a uniprocessor system, an SMP system may actually have more than one process running at the same time.
At first glance, this seems like any system administrator's dream. First and foremost, SMP makes it possible to increase a system's CPU power even if CPUs with faster clock speeds are not available — just by adding another CPU. However, this flexibility comes with some caveats.
The first caveat is that not all systems are capable of SMP operation. Your system must have a motherboard designed to support multiple processors. If it does not, a motherboard upgrade (at the least) would be required.
The second caveat is that SMP increases system overhead. This makes sense if you stop to think about it; with more CPUs to schedule work for, the operating system requires more CPU cycles for overhead. Another aspect to this is that with multiple CPUs, there can be more contention for system resources. Because of these factors, upgrading a dual-processor system to a quad-processor unit does not result in a 100% increase in available CPU power. In fact, depending on the actual hardware, the workload, and the processor architecture, it is possible to reach a point where the addition of another processor could actually reduce system performance.
Another point to keep in mind is that SMP does not help workloads consisting of one monolithic application with a single stream of execution. In other words, if a large compute-bound simulation program runs as one process and without threads, it will not run any faster on an SMP system than on a single-processor machine. In fact, it may even run somewhat slower, due to the increased overhead SMP brings. For these reasons, many system administrators feel that when it comes to CPU power, single stream processing power is the way to go. It provides the most CPU power with the fewest restrictions on its use.
While this discussion seems to indicate that SMP is never a good idea, there are circumstances in which it makes sense. For example, environments running multiple highly compute-bound applications are good candidates for SMP. The reason for this is that applications that do nothing but compute for long periods of time keep contention between active processes (and therefore, the operating system overhead) to a minimum, while the processes themselves keep every CPU busy.
One other thing to keep in mind about SMP is that the performance of an SMP system tends to degrade more gracefully as the system load increases. This does make SMP systems popular in server and multi-user environments, as the ever-changing process mix can impact the system-wide load less on a multi-processor machine.
This situation leads to what is humorously termed as a forklift upgrade, which means a complete replacement of a computer.