commit 8020355f44545d6e69179d49d317130132a121cb Author: Greg Kroah-Hartman Date: Sat Jan 30 13:27:16 2021 +0100 Linux 4.9.254 Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20210129105910.583037839@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 27d298bf97efcfd6d805dd7ea5cdce5c8007bc7c Author: Arvind Sankar Date: Tue Aug 11 20:43:08 2020 -0400 x86/boot/compressed: Disable relocation relaxation commit 09e43968db40c33a73e9ddbfd937f46d5c334924 upstream. The x86-64 psABI [0] specifies special relocation types (R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker can take advantage of for optimization (relaxation) at link time. This is supported by LLD and binutils versions 2.26 onwards. The compressed kernel is position-independent code, however, when using LLD or binutils versions before 2.27, it must be linked without the -pie option. In this case, the linker may optimize certain instructions into a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo. This potential issue has been present with LLD and binutils-2.26 for a long time, but it has never manifested itself before now: - LLD and binutils-2.26 only relax movq foo@GOTPCREL(%rip), %reg to leaq foo(%rip), %reg which is still position-independent, rather than mov $foo, %reg which is permitted by the psABI when -pie is not enabled. - GCC happens to only generate GOTPCREL relocations on mov instructions. - CLang does generate GOTPCREL relocations on non-mov instructions, but when building the compressed kernel, it uses its integrated assembler (due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as), which has so far defaulted to not generating the GOTPCRELX relocations. Nick Desaulniers reports [1,2]: "A recent change [3] to a default value of configuration variable (ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX relocations. LLD will relax instructions with these relocations based on whether the image is being linked as position independent or not. When not, then LLD will relax these instructions to use absolute addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with Clang and linked with LLD to fail to boot." Patch series [4] is a solution to allow the compressed kernel to be linked with -pie unconditionally, but even if merged is unlikely to be backported. As a simple solution that can be applied to stable as well, prevent the assembler from generating the relaxed relocation types using the -mrelax-relocations=no option. For ease of backporting, do this unconditionally. [0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65 [1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/ [2] https://github.com/ClangBuiltLinux/linux/issues/1121 [3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0 [4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/ Reported-by: Nick Desaulniers Signed-off-by: Arvind Sankar Signed-off-by: Ingo Molnar Tested-by: Nick Desaulniers Tested-by: Sedat Dilek Acked-by: Ard Biesheuvel Reviewed-by: Nick Desaulniers Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200812004308.1448603-1-nivedita@alum.mit.edu [nc: Backport to 4.9] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman commit 04f51df12ddaa0e2a38223da00e0d3ed02d62a01 Author: Gaurav Kohli Date: Tue Oct 6 15:03:53 2020 +0530 tracing: Fix race in trace_open and buffer resize call commit bbeb97464eefc65f506084fd9f18f21653e01137 upstream. Below race can come, if trace_open and resize of cpu buffer is running parallely on different cpus CPUX CPUY ring_buffer_resize atomic_read(&buffer->resize_disabled) tracing_open tracing_reset_online_cpus ring_buffer_reset_cpu rb_reset_cpu rb_update_pages remove/insert pages resetting pointer This race can cause data abort or some times infinte loop in rb_remove_pages and rb_insert_pages while checking pages for sanity. Take buffer lock to fix this. Link: https://lkml.kernel.org/r/1601976833-24377-1-git-send-email-gkohli@codeaurora.org Cc: stable@vger.kernel.org Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic") Reported-by: Denis Efremov Signed-off-by: Gaurav Kohli Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 4c3134adf3391ffc8ac959be83ea8b6c56342cc3 Author: Wang Hai Date: Thu Jan 28 19:32:50 2021 +0800 Revert "mm/slub: fix a memory leak in sysfs_slab_add()" commit 757fed1d0898b893d7daa84183947c70f27632f3 upstream. This reverts commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2. syzbot report a double-free bug. The following case can cause this bug. - mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails, it does: out_free_cache: kmem_cache_free(kmem_cache, s); - but __kmem_cache_create() - at least for slub() - will have done sysfs_slab_add(s) -> sysfs_create_group() .. fails .. -> kobject_del(&s->kobj); .. which frees s ... We can't remove the kmem_cache_free() in create_cache(), because other error cases of __kmem_cache_create() do not free this. So, revert the commit dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") to fix this. Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com Fixes: dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()") Acked-by: Vlastimil Babka Signed-off-by: Wang Hai Cc: Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 24c1a3d010531ebaa08f8da46f3506829d29ae9a Author: Dan Carpenter Date: Tue Jan 19 17:48:03 2021 +0300 net: dsa: b53: fix an off by one in checking "vlan->vid" commit 8e4052c32d6b4b39c1e13c652c7e33748d447409 upstream. The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ed4b430696208a0a85e3c5d1c318338e28e4fb3b Author: Eric Dumazet Date: Thu Jan 14 10:52:29 2021 -0800 net_sched: avoid shift-out-of-bounds in tcindex_set_parms() commit bcd0cf19ef8258ac31b9a20248b05c15a1f4b4b0 upstream. tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT attribute is not silly. UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29 shift exponent 255 is too large for 32-bit type 'int' CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 valid_perfect_hash net/sched/cls_tcindex.c:260 [inline] tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425 tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546 tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127 rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2336 ___sys_sendmsg+0xf3/0x170 net/socket.c:2390 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2423 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Link: https://lore.kernel.org/r/20210114185229.1742255-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4a6303bca5188db92bebcb741d9cfbc1a922319d Author: Matteo Croce Date: Fri Jan 15 19:42:08 2021 +0100 ipv6: create multicast route with RTPROT_KERNEL commit a826b04303a40d52439aa141035fca5654ccaccd upstream. The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 692805e5c064f29288af628f64f25fc9ebb02984 Author: Alexander Lobakin Date: Fri Jan 15 15:04:40 2021 +0000 skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too commit 66c556025d687dbdd0f748c5e1df89c977b6c02a upstream. Commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") ensured that skbs with data size lower than 1025 bytes will be kmalloc'ed to avoid excessive page cache fragmentation and memory consumption. However, the fix adressed only __napi_alloc_skb() (primarily for virtio_net and napi_get_frags()), but the issue can still be achieved through __netdev_alloc_skb(), which is still used by several drivers. Drivers often allocate a tiny skb for headers and place the rest of the frame to frags (so-called copybreak). Mirror the condition to __netdev_alloc_skb() to handle this case too. Since v1 [0]: - fix "Fixes:" tag; - refine commit message (mention copybreak usecase). [0] https://lore.kernel.org/netdev/20210114235423.232737-1-alobakin@pm.me Fixes: a1c7fff7e18f ("net: netdev_alloc_skb() use build_skb()") Signed-off-by: Alexander Lobakin Link: https://lore.kernel.org/r/20210115150354.85967-1-alobakin@pm.me Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2b134423811ec5f9ce4ca062b66a88f152b66790 Author: Geert Uytterhoeven Date: Mon Jan 18 16:08:12 2021 +0100 sh_eth: Fix power down vs. is_opened flag ordering commit f6a2e94b3f9d89cb40771ff746b16b5687650cbb upstream. sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven Reviewed-by: Sergei Shtylyov Reviewed-by: Niklas Söderlund Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 268daa2a79913d3958197da9de5f68a6a0258f65 Author: Necip Fazil Yildiran Date: Thu Sep 17 18:45:48 2020 +0300 sh: dma: fix kconfig dependency for G2_DMA commit f477a538c14d07f8c45e554c8c5208d588514e98 upstream. When G2_DMA is enabled and SH_DMA is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for SH_DMA_API Depends on [n]: SH_DMA [=n] Selected by [y]: - G2_DMA [=y] && SH_DREAMCAST [=y] The reason is that G2_DMA selects SH_DMA_API without depending on or selecting SH_DMA while SH_DMA_API depends on SH_DMA. When G2_DMA was first introduced with commit 40f49e7ed77f ("sh: dma: Make G2 DMA configurable."), this wasn't an issue since SH_DMA_API didn't have such dependency, and this way was the only way to enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was made visible and dependent on SH_DMA with commit d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver"). Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues. Fixes: d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver") Signed-off-by: Necip Fazil Yildiran Signed-off-by: Rich Felker Signed-off-by: Greg Kroah-Hartman commit 73a9742caedc131e4bc1a5b1a10fee185bfbdcff Author: Guillaume Nault Date: Sat Jan 16 11:44:26 2021 +0100 netfilter: rpfilter: mask ecn bits before fib lookup commit 2e5a6266fbb11ae93c468dfecab169aca9c27b43 upstream. RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 599466588d253fa9a83dd8064be18c536b20241d Author: Will Deacon Date: Tue Jan 12 22:48:32 2021 +0000 compiler.h: Raise minimum version of GCC to 5.1 for arm64 commit dca5244d2f5b94f1809f0c02a549edf41ccd5493 upstream. GCC versions >= 4.9 and < 5.1 have been shown to emit memory references beyond the stack pointer, resulting in memory corruption if an interrupt is taken after the stack pointer has been adjusted but before the reference has been executed. This leads to subtle, infrequent data corruption such as the EXT4 problems reported by Russell King at the link below. Life is too short for buggy compilers, so raise the minimum GCC version required by arm64 to 5.1. Reported-by: Russell King Suggested-by: Arnd Bergmann Signed-off-by: Will Deacon Tested-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Reviewed-by: Nathan Chancellor Acked-by: Linus Torvalds Cc: Cc: Theodore Ts'o Cc: Florian Weimer Cc: Peter Zijlstra Cc: Nick Desaulniers Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org Signed-off-by: Catalin Marinas [will: backport to 4.4.y/4.9.y/4.14.y; add __clang__ check] Link: https://lore.kernel.org/r/CA+G9fYuzE9WMSB7uGjV4gTzK510SHEdJb_UXQCzsQ5MqA=h9SA@mail.gmail.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit b98481167269b96bb60c4795dba04940202dbde3 Author: Daniel Borkmann Date: Fri Jan 22 16:00:56 2021 +0100 bpf: Fix buggy rsh min/max bounds tracking [ no upstream commit ] Fix incorrect bounds tracking for RSH opcode. Commit f23cc643f9ba ("bpf: fix range arithmetic for bpf map access") had a wrong assumption about min/max bounds. The new dst_reg->min_value needs to be derived by right shifting the max_val bounds, not min_val, and likewise new dst_reg->max_value needs to be derived by right shifting the min_val bounds, not max_val. Later stable kernels than 4.9 are not affected since bounds tracking was overall reworked and they already track this similarly as in the fix. Fixes: f23cc643f9ba ("bpf: fix range arithmetic for bpf map access") Reported-by: Ryota Shiga (Flatt Security) Signed-off-by: Daniel Borkmann Reviewed-by: John Fastabend Cc: Josef Bacik Signed-off-by: Greg Kroah-Hartman commit 20089f3284b27eb24362725778264e4148c61f8c Author: JC Kuo Date: Fri Jan 15 18:19:07 2021 +0200 xhci: tegra: Delay for disabling LFPS detector commit da7e0c3c2909a3d9bf8acfe1db3cb213bd7febfb upstream. Occasionally, we are seeing some SuperSpeed devices resumes right after being directed to U3. This commits add 500us delay to ensure LFPS detector is disabled before sending ACK to firmware. [ 16.099363] tegra-xusb 70090000.usb: entering ELPG [ 16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203 [ 16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16 [ 16.120789] tegra-xusb 70090000.usb: entering ELPG failed The register write passes through a few flop stages of 32KHz clock domain. NVIDIA ASIC designer reviewed RTL and suggests 500us delay. Cc: stable@vger.kernel.org Signed-off-by: JC Kuo Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210115161907.2875631-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 23ce98a5af66a7f9631bd0b66f245a8fbb39f218 Author: Mathias Nyman Date: Fri Jan 15 18:19:06 2021 +0200 xhci: make sure TRB is fully written before giving it to the controller commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: Tested-by: Ross Zwisler Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 54e278d8cd5c47999acc0833bd3429dc6f6c7972 Author: Patrik Jakobsson Date: Mon Jan 18 21:36:15 2021 +0100 usb: bdc: Make bdc pci driver depend on BROKEN commit ef02684c4e67d8c35ac83083564135bc7b1d3445 upstream. The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper Cc: Acked-by: Felipe Balbi Signed-off-by: Patrik Jakobsson Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman commit 2434d1a38d37f016c8f77dbb01cad0c8d6c305a6 Author: Thinh Nguyen Date: Thu Jan 14 00:09:51 2021 -0800 usb: udc: core: Use lock when write to soft_connect commit c28095bc99073ddda65e4f31f6ae0d908d4d5cd8 upstream. Use lock to guard against concurrent access for soft-connect/disconnect operations when writing to soft_connect sysfs. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Acked-by: Felipe Balbi Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/338ea01fbd69b1985ef58f0f59af02c805ddf189.1610611437.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman commit cfbce79c6dce21f0d21ab6c4112849199bb54e46 Author: Longfang Liu Date: Tue Jan 12 09:57:27 2021 +0800 USB: ehci: fix an interrupt calltrace error commit 643a4df7fe3f6831d14536fd692be85f92670a52 upstream. The system that use Synopsys USB host controllers goes to suspend when using USB audio player. This causes the USB host controller continuous send interrupt signal to system, When the number of interrupts exceeds 100000, the system will forcibly close the interrupts and output a calltrace error. When the system goes to suspend, the last interrupt is reported to the driver. At this time, the system has set the state to suspend. This causes the last interrupt to not be processed by the system and not clear the interrupt flag. This uncleared interrupt flag constantly triggers new interrupt event. This causing the driver to receive more than 100,000 interrupts, which causes the system to forcibly close the interrupt report and report the calltrace error. so, when the driver goes to sleep and changes the system state to suspend, the interrupt flag needs to be cleared. Signed-off-by: Longfang Liu Acked-by: Alan Stern Link: https://lore.kernel.org/r/1610416647-45774-1-git-send-email-liulongfang@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman commit e418332942a2a4fa25f11578d92a19db103f7b33 Author: Eugene Korenevsky Date: Sun Jan 10 20:36:09 2021 +0300 ehci: fix EHCI host controller initialization sequence commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream. According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern Signed-off-by: Eugene Korenevsky Cc: stable Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman commit 186a03e3bdd7bb0269afc37a6298ebfa8782a639 Author: Wang Hui Date: Fri Jan 15 22:59:16 2021 +0300 stm class: Fix module init return on allocation failure commit 927633a6d20af319d986f3e42c3ef9f6d7835008 upstream. In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot Signed-off-by: Wang Hui Signed-off-by: Alexander Shishkin Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com Cc: stable Signed-off-by: Greg Kroah-Hartman commit 97f337118d0e2d4621abe4114c549fdd3c28fe7b Author: Lars-Peter Clausen Date: Wed Dec 9 11:46:49 2020 +0100 iio: ad5504: Fix setting power-down state commit efd597b2839a9895e8a98fcb0b76d2f545802cd4 upstream. The power-down mask of the ad5504 is actually a power-up mask. Meaning if a bit is set the corresponding channel is powered up and if it is not set the channel is powered down. The driver currently has this the wrong way around, resulting in the channel being powered up when requested to be powered down and vice versa. Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values") Signed-off-by: Lars-Peter Clausen Acked-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit bbc6847b9b8978b520f62fbc7c68c54ef0f8d282 Author: Vincent Mailhol Date: Wed Jan 20 20:41:35 2021 +0900 can: dev: can_restart: fix use after free bug [ Upstream commit 03f16c5075b22c8902d2af739969e878b0879c94 ] After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit 9a4928759d1cfe46748c9e7d3a002a7ef5c820d5 Author: Wolfram Sang Date: Sat Jan 9 13:43:08 2021 +0100 i2c: octeon: check correct size of maximum RECV_LEN packet [ Upstream commit 1b2cfa2d1dbdcc3b6dba1ecb7026a537a1d7277f ] I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. No reason to add one to it. Fixes: 886f6f8337dd ("i2c: octeon: Support I2C_M_RECV_LEN") Signed-off-by: Wolfram Sang Reviewed-by: Robert Richter Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit 3ee5fd6f7dc9a62e6ded4ce15a803c08ff9ac9f0 Author: Ben Skeggs Date: Wed Jan 13 17:12:52 2021 +1000 drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields [ Upstream commit ba6e9ab0fcf3d76e3952deb12b5f993991621d9c ] Noticed while debugging GA102. Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit 2a12936bcaac22d6b2b44e745af4f84e3a3d01fa Author: Ben Skeggs Date: Wed Jan 13 17:12:52 2021 +1000 drm/nouveau/bios: fix issue shadowing expansion ROMs [ Upstream commit 402a89660e9dc880710b12773076a336c9dab3d7 ] This issue has generally been covered up by the presence of additional expansion ROMs after the ones we're interested in, with header fetches of subsequent images loading enough of the ROM to hide the issue. Noticed on GA102, which lacks a type 0x70 image compared to TU102,. [ 906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes [ 906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes [ 906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes [ 906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes vs [ 22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes [ 22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes [ 23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes [ 23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes [ 23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit 7bbac19e604b2443c93f01c3259734d53f776dbf Author: Can Guo Date: Mon Dec 28 04:04:36 2020 -0800 scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback [ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ] Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman Reviewed-by: Stanley Chu Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 185fe2a1c35c2617f18f8a0a4b7351b018b70871 Author: Cezary Rojewski Date: Thu Dec 17 11:54:01 2020 +0100 ASoC: Intel: haswell: Add missing pm_ops [ Upstream commit bb224c3e3e41d940612d4cc9573289cdbd5cb8f5 ] haswell machine board is missing pm_ops what prevents it from undergoing suspend-resume procedure successfully. Assign default snd_soc_pm_ops so this is no longer the case. Signed-off-by: Cezary Rojewski Link: https://lore.kernel.org/r/20201217105401.27865-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 3f47fe6446b5b1d99a2498fca987dafa86a0f944 Author: Hannes Reinecke Date: Thu Jan 21 18:50:56 2021 +0100 dm: avoid filesystem lookup in dm_get_dev_t() commit 809b1e4945774c9ec5619a8f4e2189b7b3833c0c upstream. This reverts commit 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke Signed-off-by: Martin Wilck Reviewed-by: Christoph Hellwig Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 5c9546d53bd48bd6abea65db2c2004370c84734f Author: Hans de Goede Date: Fri Jan 15 22:57:52 2021 +0100 ACPI: scan: Make acpi_bus_get_device() clear return pointer on error commit 78a18fec5258c8df9435399a1ea022d73d3eceb9 upstream. Set the acpi_device pointer which acpi_bus_get_device() returns-by- reference to NULL on errors. We've recently had 2 cases where callers of acpi_bus_get_device() did not properly error check the return value, so set the returned- by-reference acpi_device pointer to NULL, because at least some callers of acpi_bus_get_device() expect that to be done on errors. [ rjw: This issue was exposed by commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") which caused it to be much more likely to occur on some systems, but the real defect had been introduced by an earlier commit. ] Fixes: 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA") Fixes: bcfcd409d4db ("usb: split code locating ACPI companion into port and device") Reported-by: Pierre-Louis Bossart Tested-by: Pierre-Louis Bossart Diagnosed-by: Rafael J. Wysocki Signed-off-by: Hans de Goede Cc: All applicable [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 75fb54e5cd3900f1fee3ed5bc77dde05dfdbef0f Author: Takashi Iwai Date: Thu Jan 14 08:24:53 2021 +0100 ALSA: hda/via: Add minimum mute flag commit 67ea698c3950d10925be33c21ca49ffb64e21842 upstream. It turned out that VIA codecs also mute the sound in the lowest mixer level. Turn on the dac_min_mute flag to indicate the mute-as-minimum in TLV like already done in Conexant and IDT codecs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210559 Cc: Link: https://lore.kernel.org/r/20210114072453.11379-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 987cd6469b3729418ab31c503ca9ba243da1d6ea Author: Takashi Iwai Date: Fri Jan 15 10:34:28 2021 +0100 ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info() commit 217bfbb8b0bfa24619b11ab75c135fec99b99b20 upstream. snd_seq_oss_synth_make_info() didn't check the error code from snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy() with the uninitialized string as the source, which may lead to the access over the limit. Add the proper error check for avoiding the failure. Reported-by: syzbot+e42504ff21cff05a595f@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20210115093428.15882-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman