patch-2.1.107 linux/include/linux/sdla_x25.h

• Lines: 134
• Date: Wed Jun 24 14:34:44 1998
• Orig file: v2.1.106/linux/include/linux/sdla_x25.h
• Orig date: Tue Mar 10 10:03:35 1998

diff -u --recursive --new-file v2.1.106/linux/include/linux/sdla_x25.h linux/include/linux/sdla_x25.h
@@ -18,7 +18,7 @@
 /*----------------------------------------------------------------------------
  * Notes:
  * ------
- * 1. All structures defined in this file are byte-alined.  To ensure
+ * 1. All structures defined in this file are byte-aligned.  To ensure
  *    portability of this code between different platforms and compilers, one
  *    of the following defines must be defined before including this file:
  *
@@ -104,7 +104,7 @@
 #define X25_READ		0x22	/* read X.25 packet */
 #define X25_WRITE		0x23	/* send X.25 packet */
 #define X25_PLACE_CALL		0x30	/* place a call on SVC */
-#define X25_ACCEPT_CALL		0x31	/* accept incomming call */
+#define X25_ACCEPT_CALL		0x31	/* accept incoming call */
 #define X25_CLEAR_CALL		0x32	/* clear call */
 #define X25_CLEAR_CONFRM	0x33	/* send clear confirmation packet */
 #define X25_RESET		0x34	/* send reset request packet */
@@ -116,14 +116,14 @@
 #define X25_REGISTRATION_RQST	0x3A	/* send registration request packet */
 #define X25_REGISTRATION_CONFRM	0x3B	/* send registration confirmation */
 #define X25_IS_DATA_AVAILABLE	0x40	/* querry receive queue */
-#define X25_INCOMMING_CALL_CTL	0x41	/* select incomming call options */
+#define X25_INCOMING_CALL_CTL	0x41	/* select incoming call options */
 #define X25_CONFIGURE_PVC	0x42	/* configure PVC */
 #define X25_GET_ACTIVE_CHANNELS	0x43	/* get a list of active circuits */
 #define X25_READ_CHANNEL_CONFIG	0x44	/* read virt. circuit configuration */
 #define X25_FLUSH_DATA_BUFFERS	0x45	/* flush X.25-level data buffers */
 #define X25_READ_HISTORY_TABLE	0x46	/* read asynchronous event log */
 #define X25_HISTORY_TABLE_CTL	0x47	/* control asynchronous event log */
-#define	X25_GET_TX_D_BIT_STATUS	0x48	/* is packet with D-bit acknowleged */
+#define	X25_GET_TX_D_BIT_STATUS	0x48	/* is packet with D-bit acknowledged */
 #define	X25_READ_STATISTICS	0x49	/* read X.25-level statistics */
 #define	X25_FLUSH_STATISTICS	0x4A	/* flush X.25-level statistics */
 #define	X25_READ_CONFIGURATION	0x50	/* read HDLC & X.25 configuration */
@@ -139,7 +139,7 @@
 #define X25RES_LINK_CLOSED	0x03
 #define X25RES_INVAL_LENGTH	0x04
 #define X25RES_INVAL_CMD	0x05
-#define X25RES_UNNUMBERED_FRAME	0x06	/* unnunbered frame received */
+#define X25RES_UNNUMBERED_FRAME	0x06	/* unnumbered frame received */
 #define X25RES_FRM_REJECT_MODE	0x07	/* link is in Frame Reject mode */
 #define X25RES_MODEM_FAILURE	0x08	/* DCD and/or CTS dropped */
 #define X25RES_N2_RETRY_LIMIT	0x09	/* N2 retry limit has been exceeded */
@@ -153,10 +153,10 @@
 #define X25RES_INVAL_FORMAT	0x37	/* invalid packet format */
 #define X25RES_D_BIT_NOT_SUPPRT	0x38	/* D-bit pragmatics not supported */
 #define X25RES_FACIL_NOT_SUPPRT	0x39	/* Call facility not supported */
-#define X25RES_INVAL_CALL_ARG	0x3A	/* errorneous call arguments */
-#define X25RES_INVAL_CALL_DATA	0x3B	/* errorneous call user data */
+#define X25RES_INVAL_CALL_ARG	0x3A	/* erroneous call arguments */
+#define X25RES_INVAL_CALL_DATA	0x3B	/* erroneous call user data */
 #define X25RES_ASYNC_PACKET	0x40	/* asynchronous packet received */
-#define X25RES_PROTO_VIOLATION	0x41	/* protocol violation occured */
+#define X25RES_PROTO_VIOLATION	0x41	/* protocol violation occurred */
 #define X25RES_PKT_TIMEOUT	0x42	/* X.25 packet time out */
 #define X25RES_PKT_RETRY_LIMIT	0x43	/* X.25 packet retry limit exceeded */
 /*----- Command-dependent results -----*/
@@ -167,7 +167,7 @@
 #define X25RES_LINK_IS_OPEN	0x01	/* HDLC_LINK_OPEN */
 #define X25RES_LINK_IS_DISC	0x02	/* HDLC_LINK_DISC */
 #define X25RES_LINK_IS_CLOSED	0x03	/* HDLC_LINK_CLOSE */
-#define X25RES_INVAL_PARAM	0x31	/* INCOMMING_CALL_CTL */
+#define X25RES_INVAL_PARAM	0x31	/* INCOMING_CALL_CTL */
 #define X25RES_INVAL_CONFIG	0x35	/* REGISTR_RQST/CONFRM */
 
 /*
@@ -239,7 +239,7 @@
 typedef struct X25Status
 {
 	unsigned short pvc_map	PACKED;	/* 00h: PVC map */
-	unsigned short icc_map	PACKED;	/* 02h: Incomming Chan. map */
+	unsigned short icc_map	PACKED;	/* 02h: Incoming Chan. map */
 	unsigned short twc_map	PACKED;	/* 04h: Two-way Cnan. map */
 	unsigned short ogc_map	PACKED;	/* 06h: Outgoing Chan. map */
 	TX25TimeStamp tstamp	PACKED;	/* 08h: timestamp (BCD) */
@@ -256,7 +256,7 @@
 #define X25_RX_INTR	0x01	/* receive interrupt */
 #define X25_TX_INTR	0x02	/* transmit interrupt */
 #define X25_MODEM_INTR	0x04	/* modem status interrupt (CTS/DCD) */
-#define X25_EVENT_INTR	0x10	/* asyncronous event encountered */
+#define X25_EVENT_INTR	0x10	/* asynchronous event encountered */
 #define X25_CMD_INTR	0x08	/* interface command complete */
 
 /*
@@ -390,8 +390,8 @@
 	unsigned short pktMTU		PACKED;	/* 0Fh:  */
 	unsigned short loPVC		PACKED;	/* 11h:  */
 	unsigned short hiPVC		PACKED;	/* 13h:  */
-	unsigned short loIncommingSVC	PACKED;	/* 15h:  */
-	unsigned short hiIncommingSVC	PACKED;	/* 17h:  */
+	unsigned short loIncomingSVC	PACKED;	/* 15h:  */
+	unsigned short hiIncomingSVC	PACKED;	/* 17h:  */
 	unsigned short loTwoWaySVC	PACKED;	/* 19h:  */
 	unsigned short hiTwoWaySVC	PACKED;	/* 1Bh:  */
 	unsigned short loOutgoingSVC	PACKED;	/* 1Dh:  */
@@ -421,8 +421,8 @@
 {
 	unsigned short loPVC		PACKED;	/* 00h: lowest PVC number */
 	unsigned short hiPVC		PACKED;	/* 02h: highest PVC number */
-	unsigned short loIncommingSVC	PACKED;	/* 04h: lowest incoming SVC */
-	unsigned short hiIncommingSVC	PACKED;	/* 06h: highest incoming SVC */
+	unsigned short loIncomingSVC	PACKED;	/* 04h: lowest incoming SVC */
+	unsigned short hiIncomingSVC	PACKED;	/* 06h: highest incoming SVC */
 	unsigned short loTwoWaySVC	PACKED;	/* 08h: lowest two-way SVC */
 	unsigned short hiTwoWaySVC	PACKED;	/* 0Ah: highest two-way SVC */
 	unsigned short loOutgoingSVC	PACKED;	/* 0Ch: lowest outgoing SVC */
@@ -499,7 +499,7 @@
 /*
  * Defines for the 'type' field.
  */
-#define X25LOG_INCOMMING	0x00
+#define X25LOG_INCOMING		0x00
 #define X25LOG_APPLICATION 	0x01
 #define X25LOG_AUTOMATIC	0x02
 #define X25LOG_ERROR		0x04
@@ -568,7 +568,7 @@
 #define X25_TRCERR_RX_BADCRC	0x20	/* receive CRC error */
 #define X25_TRCERR_RX_OVERRUN	0x30	/* receiver overrun error */
 #define X25_TRCERR_RX_TOO_LONG	0x40	/* excessive frame length error */
-#define X25_TRCERR_TX_ABORT	0x70	/* aborted frame transmittion error */
+#define X25_TRCERR_TX_ABORT	0x70	/* aborted frame transmission error */
 #define X25_TRCERR_TX_UNDERRUN	0x80	/* transmit underrun error */
 
 /*****************************************************************************
@@ -582,7 +582,7 @@
 	unsigned char data[0]	PACKED;
 } THDLCFrame;
 
-typedef struct X25Pkt			/*----- X.25 Paket Format ----------*/
+typedef struct X25Pkt			/*----- X.25 Packet Format ----------*/
 {
 	unsigned char lcn_hi	PACKED;	/* 4 MSB of Logical Channel Number */
 	unsigned char lcn_lo	PACKED;	/* 8 LSB of Logical Channel Number */