patch-2.3.38 linux/drivers/char/ppdev.h
Next file: linux/drivers/char/serial.c
Previous file: linux/drivers/char/ppdev.c
Back to the patch index
Back to the overall index
- Lines: 82
- Date:
Wed Dec 31 16:00:00 1969
- Orig file:
v2.3.37/linux/drivers/char/ppdev.h
- Orig date:
Mon Oct 11 15:38:14 1999
diff -u --recursive --new-file v2.3.37/linux/drivers/char/ppdev.h linux/drivers/char/ppdev.h
@@ -1,81 +0,0 @@
-/*
- * linux/drivers/char/ppdev.h
- *
- * User-space parallel port device driver (header file).
- *
- * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
- */
-
-#define PP_MAJOR 99
-
-#define PP_IOCTL 'p'
-
-/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
-#define PPSETMODE _IOW(PP_IOCTL, 0x80, int)
-
-/* Read status */
-#define PPRSTATUS _IOR(PP_IOCTL, 0x81, unsigned char)
-#define PPWSTATUS OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
-
-/* Read/write control */
-#define PPRCONTROL _IOR(PP_IOCTL, 0x83, unsigned char)
-#define PPWCONTROL _IOW(PP_IOCTL, 0x84, unsigned char)
-
-struct ppdev_frob_struct {
- unsigned char mask;
- unsigned char val;
-};
-#define PPFCONTROL _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
-
-/* Read/write data */
-#define PPRDATA _IOR(PP_IOCTL, 0x85, unsigned char)
-#define PPWDATA _IOW(PP_IOCTL, 0x86, unsigned char)
-
-/* Read/write econtrol (not used) */
-#define PPRECONTROL OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
-#define PPWECONTROL OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
-
-/* Read/write FIFO (not used) */
-#define PPRFIFO OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
-#define PPWFIFO OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
-
-/* Claim the port to start using it */
-#define PPCLAIM _IO(PP_IOCTL, 0x8b)
-
-/* Release the port when you aren't using it */
-#define PPRELEASE _IO(PP_IOCTL, 0x8c)
-
-/* Yield the port (release it if another driver is waiting,
- * then reclaim) */
-#define PPYIELD _IO(PP_IOCTL, 0x8d)
-
-/* Register device exclusively (must be before PPCLAIM). */
-#define PPEXCL _IO(PP_IOCTL, 0x8f)
-
-/* Data line direction: non-zero for input mode. */
-#define PPDATADIR _IOW(PP_IOCTL, 0x90, int)
-
-/* Negotiate a particular IEEE 1284 mode. */
-#define PPNEGOT _IOW(PP_IOCTL, 0x91, int)
-
-/* Set control lines when an interrupt occurs. */
-#define PPWCTLONIRQ _IOW(PP_IOCTL, 0x92, unsigned char)
-
-/* Clear (and return) interrupt count. */
-#define PPCLRIRQ _IOR(PP_IOCTL, 0x93, int)
-
-/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
-#define PPSETPHASE _IOW(PP_IOCTL, 0x94, int)
-
-/* Set and get port timeout (struct timeval's) */
-#define PPGETTIME _IOR(PP_IOCTL, 0x95, struct timeval)
-#define PPSETTIME _IOW(PP_IOCTL, 0x96, struct timeval)
-
-
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)