patch-2.3.47 linux/drivers/usb/usb_storage.h

• Lines: 131
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.3.46/linux/drivers/usb/usb_storage.h
• Orig date: Thu Feb 10 17:11:15 2000

diff -u --recursive --new-file v2.3.46/linux/drivers/usb/usb_storage.h linux/drivers/usb/usb_storage.h
@@ -1,130 +0,0 @@
-/* Driver for USB mass storage - include file
- *
- * (c) 1999 Michael Gee (michael@linuxspecific.com)
- * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
- *
- */
-
-#include <linux/config.h>
-
-#define USB_STORAGE "usb-storage: "
-
-extern int usb_stor_debug;
-
-#ifdef CONFIG_USB_STORAGE_DEBUG
-void us_show_command(Scsi_Cmnd *srb);
-#define US_DEBUGP(x...) { if(usb_stor_debug) printk( KERN_DEBUG USB_STORAGE ## x ); }
-#define US_DEBUGPX(x...) { if(usb_stor_debug) printk( ## x ); }
-#define US_DEBUG(x)  { if(usb_stor_debug) x; }
-#else
-#define US_DEBUGP(x...)
-#define US_DEBUGPX(x...)
-#define US_DEBUG(x)
-#endif
-
-/* bit set if input */
-extern unsigned char us_direction[256/8];
-#define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
-
-/* Sub Classes */
-
-#define US_SC_RBC	1		/* Typically, flash devices */
-#define US_SC_8020	2		/* CD-ROM */
-#define US_SC_QIC	3		/* QIC-157 Tapes */
-#define US_SC_UFI	4		/* Floppy */
-#define US_SC_8070	5		/* Removable media */
-#define US_SC_SCSI	6		/* Transparent */
-#define US_SC_MIN	US_SC_RBC
-#define US_SC_MAX	US_SC_SCSI
-
-/* Protocols */
-
-#define US_PR_CB	1		/* Control/Bulk w/o interrupt */
-#define US_PR_CBI	0		/* Control/Bulk/Interrupt */
-#define US_PR_BULK	0x50		/* bulk only */
-
-/*
- * Bulk only data structures (Zip 100, for example)
- */
-
-/* command block wrapper */
-struct bulk_cb_wrap {
-	__u32	Signature;		/* contains 'USBC' */
-	__u32	Tag;			/* unique per command id */
-	__u32	DataTransferLength;	/* size of data */
-	__u8	Flags;			/* direction in bit 0 */
-	__u8	Lun;			/* LUN normally 0 */
-	__u8	Length;			/* of of the CDB */
-	__u8	CDB[16];		/* max command */
-};
-
-#define US_BULK_CB_WRAP_LEN 	31
-#define US_BULK_CB_SIGN		0x43425355
-#define US_BULK_FLAG_IN		1
-#define US_BULK_FLAG_OUT	0
-
-/* command status wrapper */
-struct bulk_cs_wrap {
-	__u32	Signature;		/* should = 'USBS' */
-	__u32	Tag;			/* same as original command */
-	__u32	Residue;		/* amount not transferred */
-	__u8	Status;			/* see below */
-	__u8	Filler[18];
-};
-
-#define US_BULK_CS_WRAP_LEN	13
-#define US_BULK_CS_SIGN		0x53425355
-#define US_BULK_STAT_OK		0
-#define US_BULK_STAT_FAIL	1
-#define US_BULK_STAT_PHASE	2
-
-#define US_BULK_RESET		0xff
-#define US_BULK_RESET_SOFT	1
-#define US_BULK_RESET_HARD	0
-
-/*
- * Transport return codes
- */
-
-#define USB_STOR_TRANSPORT_GOOD    0    /* Transport good, command good    */
-#define USB_STOR_TRANSPORT_FAILED  1    /* Transport good, command failed  */
-#define USB_STOR_TRANSPORT_ERROR   2    /* Transport bad (i.e. device dead */
-
-/*
- * CBI style
- */
-
-#define US_CBI_ADSC		0
-
-/* 
- * GUID definitions
- */
-
-#define GUID(x) __u32 x[3]
-#define GUID_EQUAL(x, y) (x[0] == y[0] && x[1] == y[1] && x[2] == y[2])
-#define GUID_CLEAR(x) x[0] = x[1] = x[2] = 0;
-#define GUID_NONE(x) (!x[0] && !x[1] && !x[2])
-#define GUID_FORMAT "%08x%08x%08x"
-#define GUID_ARGS(x) x[0], x[1], x[2]
-
-static inline void make_guid( __u32 *pg, __u16 vendor, __u16 product, char *serial)
-{
-	pg[0] = (vendor << 16) | product;
-	pg[1] = pg[2] = 0;
-	while (*serial) {
-		pg[1] <<= 4;
-		pg[1] |= pg[2] >> 28;
-		pg[2] <<= 4;
-		if (*serial >= 'a')
-			*serial -= 'a' - 'A';
-		pg[2] |= (*serial <= '9' && *serial >= '0') ? *serial - '0'
-			: *serial - 'A' + 10;
-		serial++;
-	}
-}
-
-/* Flag definitions */
-#define US_FL_IP_STATUS	      0x00000001         /* status uses interrupt */
-#define US_FL_FIXED_COMMAND   0x00000002 /* expand commands to fixed size */
-#define US_FL_MODE_XLATE      0x00000004 /* translate _6 to _10 comands for
-					    Win/MacOS compatibility */