patch-2.3.48 linux/arch/mips64/sgi-ip22/ip22-hpc.c

• Lines: 104
• Date: Thu Feb 24 22:53:35 2000
• Orig file: v2.3.47/linux/arch/mips64/sgi-ip22/ip22-hpc.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.47/linux/arch/mips64/sgi-ip22/ip22-hpc.c linux/arch/mips64/sgi-ip22/ip22-hpc.c
@@ -0,0 +1,103 @@
+/* $Id: ip22-hpc.c,v 1.2 1999/12/04 03:59:01 ralf Exp $
+ *
+ * ip22-hpc.c: Routines for generic manipulation of the HPC controllers.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999 Ralf Baechle
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/sgi/sgihpc.h>
+#include <asm/sgi/sgint23.h>
+#include <asm/sgialib.h>
+
+#undef DEBUG_SGIHPC
+
+struct hpc3_regs *hpc3c0, *hpc3c1;
+struct hpc3_miscregs *hpc3mregs;
+
+/* We need software copies of these because they are write only. */
+unsigned int sgi_hpc_write1, sgi_hpc_write2;
+
+/* Machine specific identifier knobs. */
+int sgi_has_ioc2 = 0;
+int sgi_guiness = 0;
+int sgi_boardid;
+
+void __init sgihpc_init(void)
+{
+	unsigned long sid, crev, brev;
+
+	hpc3c0 = (struct hpc3_regs *) (KSEG1 + HPC3_CHIP0_PBASE);
+	hpc3c1 = (struct hpc3_regs *) (KSEG1 + HPC3_CHIP1_PBASE);
+	hpc3mregs = (struct hpc3_miscregs *) (KSEG1 + HPC3_MREGS_PBASE);
+	sid = hpc3mregs->sysid;
+
+	sid &= 0xff;
+	crev = (sid & 0xe0) >> 5;
+	brev = (sid & 0x1e) >> 1;
+
+#ifdef DEBUG_SGIHPC
+	prom_printf("sgihpc_init: crev<%2x> brev<%2x>\n", crev, brev);
+	prom_printf("sgihpc_init: ");
+#endif
+
+	/* This test works now thanks to William J. Earl */
+	if ((sid & 1) == 0 ) {
+#ifdef DEBUG_SGIHPC
+		prom_printf("GUINESS ");
+#endif
+		sgi_guiness = 1;
+	} else {
+#ifdef DEBUG_SGIHPC
+		prom_printf("FULLHOUSE ");
+#endif
+		sgi_guiness = 0;
+	}
+	sgi_boardid = brev;
+
+#ifdef DEBUG_SGIHPC
+	prom_printf("sgi_boardid<%d> ", sgi_boardid);
+#endif
+
+	if(crev == 1) {
+		if((sid & 1) || (brev >= 2)) {
+#ifdef DEBUG_SGIHPC
+			prom_printf("IOC2 ");
+#endif
+			sgi_has_ioc2 = 1;
+		} else {
+#ifdef DEBUG_SGIHPC
+			prom_printf("IOC1 revision 1 ");
+#endif
+		}
+	} else {
+#ifdef DEBUG_SGIHPC
+		prom_printf("IOC1 revision 0 ");
+#endif
+	}
+#ifdef DEBUG_SGIHPC
+	prom_printf("\n");
+#endif
+
+	sgi_hpc_write1 = (HPC3_WRITE1_PRESET |
+		  HPC3_WRITE1_KMRESET |
+		  HPC3_WRITE1_ERESET |
+		  HPC3_WRITE1_LC0OFF);
+
+	sgi_hpc_write2 = (HPC3_WRITE2_EASEL |
+		  HPC3_WRITE2_NTHRESH |
+		  HPC3_WRITE2_TPSPEED |
+		  HPC3_WRITE2_EPSEL |
+		  HPC3_WRITE2_U0AMODE |
+		  HPC3_WRITE2_U1AMODE);
+
+	if(!sgi_guiness)
+		sgi_hpc_write1 |= HPC3_WRITE1_GRESET;
+	hpc3mregs->write1 = sgi_hpc_write1;
+	hpc3mregs->write2 = sgi_hpc_write2;
+
+	hpc3c0->pbus_piocfgs[0][6] |= HPC3_PIOPCFG_HW;
+}