patch-2.3.50 linux/drivers/sound/Config.in
Next file: linux/drivers/sound/Makefile
Previous file: linux/drivers/scsi/sr.c
Back to the patch index
Back to the overall index
- Lines: 223
- Date:
Tue Mar 7 13:40:24 2000
- Orig file:
v2.3.49/linux/drivers/sound/Config.in
- Orig date:
Tue Feb 1 01:35:44 2000
diff -u --recursive --new-file v2.3.49/linux/drivers/sound/Config.in linux/drivers/sound/Config.in
@@ -81,79 +81,21 @@
dep_tristate ' OSS sound modules' CONFIG_SOUND_OSS $CONFIG_SOUND
if [ "$CONFIG_SOUND_OSS" = "y" -o "$CONFIG_SOUND_OSS" = "m" ]; then
- if [ "$CONFIG_SOUND_OSS" = "y" ]; then
- bool ' Persistent DMA buffers' CONFIG_SOUND_DMAP
- fi
-
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
dep_tristate ' AD1816(A) based cards (EXPERIMENTAL)' CONFIG_SOUND_AD1816 $CONFIG_SOUND
- if [ "$CONFIG_SOUND_AD1816" = "y" ]; then
- hex 'AD1816 audio I/O base 530, 604, E80 or F40' CONFIG_AD1816_BASE 530
- int 'AD1816 audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_AD1816_IRQ 7
- int 'AD1816 audio DMA 0, 1 or 3' CONFIG_AD1816_DMA 0
- int 'AD1816 second (duplex) DMA 0, 1 or 3' CONFIG_AD1816_DMA2 3
- int 'AD1816 clock chip frequency' CONFIG_AD1816_CLOCK 33000
- fi
fi
dep_tristate ' Aztech Sound Galaxy (non-PnP) cards' CONFIG_SOUND_SGALAXY $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_SGALAXY" = "y" ]; then
- hex 'SGALAXY audio I/O base 530, 604, E80 or F40' CONFIG_SGALAXY_BASE 530
- int 'SGALAXY audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_SGALAXY_IRQ 11
- int 'SGALAXY audio DMA 0, 1 or 3' CONFIG_SGALAXY_DMA 0
- int 'SGALAXY second (duplex) DMA 0, 1 or 3' CONFIG_SGALAXY_DMA2 3
- hex 'SGALAXY SB I/O base 220 or 240' CONFIG_SGALAXY_SGBASE 220
- fi
-
dep_tristate ' Crystal CS4232 based (PnP) cards' CONFIG_SOUND_CS4232 $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_CS4232" = "y" ]; then
- hex 'CS4232 audio I/O base (normally 530, 604, E80 or F40)' CONFIG_CS4232_BASE 530
- int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_IRQ 11
- int 'CS4232 audio DMA 0, 1 or 3' CONFIG_CS4232_DMA 0
- int 'CS4232 second (duplex) DMA 0, 1 or 3' CONFIG_CS4232_DMA2 3
- hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_CS4232_MPU_BASE 330
- int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15' CONFIG_CS4232_MPU_IRQ 9
- fi
-
dep_tristate ' Ensoniq SoundScape support' CONFIG_SOUND_SSCAPE $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_SSCAPE" = "y" ]; then
- hex 'SoundScape MIDI I/O base 320, 330, 340 or 350' CONFIG_SSCAPE_BASE 330
- int 'SoundScape MIDI IRQ ' CONFIG_SSCAPE_IRQ 9
- int 'SoundScape initialization DMA 0, 1 or 3' CONFIG_SSCAPE_DMA 3
- hex 'SoundScape audio I/O base 534, 608, E84 or F44' CONFIG_SSCAPE_MSS_BASE 534
- int 'SoundScape audio IRQ 7, 9, 10 or 11' CONFIG_SSCAPE_MSS_IRQ 11
- fi
-
dep_tristate ' Gravis Ultrasound support' CONFIG_SOUND_GUS $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_GUS" = "y" -o "$CONFIG_SOUND_GUS" = "m" ]; then
- bool ' 16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_GUS16
- bool ' GUS MAX support' CONFIG_GUSMAX
- fi
- if [ "$CONFIG_SOUND_GUS" = "y" ]; then
- hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260' CONFIG_GUS_BASE 220
- int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15' CONFIG_GUS_IRQ 15
- int 'GUS DMA 1, 3, 5, 6 or 7' CONFIG_GUS_DMA 6
- int 'Second DMA channel for GUS 1, 3, 5, 6 or 7' CONFIG_GUS_DMA2 -1
- if [ "$CONFIG_GUS16" = "y" ]; then
- hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40' CONFIG_GUS16_BASE 530
- int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9' CONFIG_GUS16_IRQ 7
- int 'GUS DMA 0, 1 or 3' CONFIG_GUS16_DMA 3
- fi
+ if [ "$CONFIG_SOUND_GUS" != "n" ]; then
+ bool ' 16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_SOUND_GUS16
+ bool ' GUS MAX support' CONFIG_SOUND_GUSMAX
fi
-
dep_tristate ' Loopback MIDI device support' CONFIG_SOUND_VMIDI $CONFIG_SOUND_OSS
-
dep_tristate ' MediaTrix AudioTrix Pro support' CONFIG_SOUND_TRIX $CONFIG_SOUND_OSS
if [ "$CONFIG_SOUND_TRIX" = "y" ]; then
- hex 'TRIX audio I/O base 530, 604, E80 or F40' CONFIG_TRIX_BASE 530
- int 'TRIX audio IRQ 7, 9, 10 or 11' CONFIG_TRIX_IRQ 11
- int 'TRIX audio DMA 0, 1 or 3' CONFIG_TRIX_DMA 0
- int 'TRIX second (duplex) DMA 0, 1 or 3' CONFIG_TRIX_DMA2 3
- hex 'TRIX MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_TRIX_MPU_BASE 330
- int 'TRIX MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_TRIX_MPU_IRQ 9
- hex 'TRIX SB I/O base 220, 210, 230, 240, 250, 260 or 270' CONFIG_TRIX_SB_BASE 220
- int 'TRIX SB IRQ 3, 4, 5 or 7' CONFIG_TRIX_SB_IRQ 7
- int 'TRIX SB DMA 1 or 3' CONFIG_TRIX_SB_DMA 1
bool ' Have TRXPRO.HEX firmware file' CONFIG_TRIX_HAVE_BOOT
if [ "$CONFIG_TRIX_HAVE_BOOT" = "y" ]; then
string ' Full pathname of TRXPRO.HEX firmware file' CONFIG_TRIX_BOOT_FILE /etc/sound/trxpro.hex
@@ -161,58 +103,23 @@
fi
dep_tristate ' Microsoft Sound System support' CONFIG_SOUND_MSS $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_MSS" = "y" ]; then
- bool ' Enable support for the SoundPro mixer' CONFIG_SOUND_SPRO
- hex 'MSS/WSS I/O base 530, 604, E80 or F40' CONFIG_MSS_BASE 530
- int 'MSS/WSS IRQ 7, 9, 10 or 11' CONFIG_MSS_IRQ 11
- int 'MSS/WSS DMA 0, 1 or 3' CONFIG_MSS_DMA 3
- int 'MSS/WSS second DMA (if possible) 0, 1 or 3' CONFIG_MSS_DMA2 -1
- fi
-
dep_tristate ' MPU-401 support (NOT for SB16)' CONFIG_SOUND_MPU401 $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_MPU401" = "y" ]; then
- hex 'I/O base for MPU401 Check from manual of the card' CONFIG_MPU_BASE 330
- int 'MPU401 IRQ Check from manual of the card' CONFIG_MPU_IRQ 9
- fi
-
dep_tristate ' NM256AV/NM256ZX audio support' CONFIG_SOUND_NM256 $CONFIG_SOUND_OSS
-
dep_tristate ' OPTi MAD16 and/or Mozart based cards' CONFIG_SOUND_MAD16 $CONFIG_SOUND_OSS
if [ "$CONFIG_SOUND_MAD16" = "y" -o "$CONFIG_SOUND_MAD16" = "m" ]; then
bool ' Support MIDI in older MAD16 based cards (requires SB)' CONFIG_MAD16_OLDCARD
fi
- if [ "$CONFIG_SOUND_MAD16" = "y" ]; then
- hex 'MAD16 audio I/O base 530, 604, E80 or F40' CONFIG_MAD16_BASE 530
- int 'MAD16 audio IRQ 7, 9, 10 or 11' CONFIG_MAD16_IRQ 11
- int 'MAD16 audio DMA 0, 1 or 3' CONFIG_MAD16_DMA 3
- int 'MAD16 second (duplex) DMA 0, 1 or 3' CONFIG_MAD16_DMA2 0
- hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)' CONFIG_MAD16_MPU_BASE 330
- int 'MAD16 MIDI IRQ 5, 7, 9 or 10' CONFIG_MAD16_MPU_IRQ 9
- fi
-
dep_tristate ' ProAudioSpectrum 16 support' CONFIG_SOUND_PAS $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_PAS" = "y" ]; then
- int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15' CONFIG_PAS_IRQ 10
- int 'PAS16 DMA 0, 1, 3, 5, 6 or 7' CONFIG_PAS_DMA 3
- bool ' Enable PAS16 joystick port' CONFIG_PAS_JOYSTICK
- fi
+ dep_bool ' Enable PAS16 joystick port' CONFIG_PAS_JOYSTICK $CONFIG_SOUND_PAS
dep_tristate ' PSS (AD1848, ADSP-2115, ESC614) support' CONFIG_SOUND_PSS $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_PSS" = "y" ]; then
- hex 'PSS I/O base 220 or 240' CONFIG_PSS_BASE 220
- hex 'PSS audio I/O base 530, 604, E80 or F40' CONFIG_PSS_MSS_BASE 530
- int 'PSS audio IRQ 7, 9, 10 or 11' CONFIG_PSS_MSS_IRQ 11
- int 'PSS audio DMA 0, 1 or 3' CONFIG_PSS_MSS_DMA 3
- hex 'PSS MIDI I/O base ' CONFIG_PSS_MPU_BASE 330
- int 'PSS MIDI IRQ 3, 4, 5, 7, 9, 10, 11, 12' CONFIG_PSS_MPU_IRQ 9
- bool ' Have DSPxxx.LD firmware file' CONFIG_PSS_HAVE_BOOT
- if [ "$CONFIG_PSS_HAVE_BOOT" = "y" ]; then
- string ' Full pathname of DSPxxx.LD firmware file' CONFIG_PSS_BOOT_FILE /etc/sound/dsp001.ld
- fi
- fi
if [ "$CONFIG_SOUND_PSS" = "y" -o "$CONFIG_SOUND_PSS" = "m" ]; then
bool ' Enable PSS mixer (Beethoven ADSP-16 and other compatibile)' CONFIG_PSS_MIXER
fi
+ bool ' Have DSPxxx.LD firmware file' CONFIG_PSS_HAVE_BOOT
+ if [ "$CONFIG_PSS_HAVE_BOOT" = "y" ]; then
+ string ' Full pathname of DSPxxx.LD firmware file' CONFIG_PSS_BOOT_FILE /etc/sound/dsp001.ld
+ fi
dep_tristate ' SoftOSS software wave table engine' CONFIG_SOUND_SOFTOSS $CONFIG_SOUND_OSS
if [ "$CONFIG_SOUND_SOFTOSS" = "y" ]; then
@@ -221,27 +128,9 @@
fi
dep_tristate ' 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SOUND_SB $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_SB" = "y" ]; then
- hex 'I/O base for SB Check from manual of the card' CONFIG_SB_BASE 220
- int 'Sound Blaster IRQ Check from manual of the card' CONFIG_SB_IRQ 7
- int 'Sound Blaster DMA 0, 1 or 3' CONFIG_SB_DMA 1
- int 'Sound Blaster 16 bit DMA (SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)' CONFIG_SB_DMA2 5
- hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card' CONFIG_SB_MPU_BASE 330
- comment 'MPU401 IRQ is only required with Jazz16, SM Wave and ESS1688.'
- comment 'Enter -1 to the following question if you have something else such as SB16/32.'
- int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card' CONFIG_SB_MPU_IRQ -1
- fi
-
dep_tristate ' Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards' CONFIG_SOUND_WAVEFRONT $CONFIG_SOUND_OSS m
- if [ "$CONFIG_SOUND_WAVEFRONT" = "y" ]; then
- hex 'I/O base for WaveFront 210, 230, 260, 290, 300, 320, 338 or 330' CONFIG_WAVEFRONT_BASE 330
- int 'WaveFront IRQ 5, 9, 12 or 15' CONFIG_WAVEFRONT_IRQ 9
- fi
-
dep_tristate ' Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_SOUND_MAUI $CONFIG_SOUND_OSS
if [ "$CONFIG_SOUND_MAUI" = "y" ]; then
- hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330' CONFIG_MAUI_BASE 330
- int 'Maui IRQ 5, 9, 12 or 15' CONFIG_MAUI_IRQ 9
bool ' Have OSWF.MOT firmware file' CONFIG_MAUI_HAVE_BOOT
if [ "$CONFIG_MAUI_HAVE_BOOT" = "y" ]; then
string ' Full pathname of OSWF.MOT firmware file' CONFIG_MAUI_BOOT_FILE /etc/sound/oswf.mot
@@ -249,47 +138,14 @@
fi
dep_tristate ' VIA 82C686 Audio Codec' CONFIG_SOUND_VIA82CXXX $CONFIG_SOUND_OSS
-
dep_tristate ' Yamaha FM synthesizer (YM3812/OPL-3) support' CONFIG_SOUND_YM3812 $CONFIG_SOUND_OSS
-
dep_tristate ' Yamaha OPL3-SA1 audio controller' CONFIG_SOUND_OPL3SA1 $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_OPL3SA1" = "y" ]; then
- hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40' CONFIG_OPL3SA1_BASE 530
- int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11' CONFIG_OPL3SA1_IRQ 11
- int 'OPL3-SA1 audio DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA 0
- int 'OPL3-SA1 second (duplex) DMA 0, 1 or 3' CONFIG_OPL3SA1_DMA2 3
- hex 'OPL3-SA1 MIDI I/O base 330, 370, 3B0 or 3F0' CONFIG_OPL3SA1_MPU_BASE 330
- int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9' CONFIG_OPL3SA1_MPU_IRQ 9
- fi
-
dep_tristate ' Yamaha OPL3-SA2, SA3, and SAx based PnP cards' CONFIG_SOUND_OPL3SA2 $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_OPL3SA2" = "y" ]; then
- int 'Chipset (-1 for autoprobe, 2, or 3)' CONFIG_OPL3SA2_CHIPSET -1
- hex 'OPL3SA2 audio I/O base (530 - F48 valid)' CONFIG_OPL3SA2_BASE 530
- int 'OPL3SA2 audio IRQ 5, 7, 9, 11, 12 or 15' CONFIG_OPL3SA2_IRQ 9
- int 'OPL3SA2 audio DMA 0, 1 or 3' CONFIG_OPL3SA2_DMA 0
- int 'OPL3SA2 second (duplex) DMA 0, 1 or 3' CONFIG_OPL3SA2_DMA2 1
- hex 'OPL3SA2 control I/O base (100 - FFE valid)' CONFIG_OPL3SA2_CTRL_BASE 370
- hex 'OPL3SA2 MIDI I/O base (300 - 334 valid)' CONFIG_OPL3SA2_MPU_BASE 330
- int 'OPL3SA2 MIDI IRQ 5, 7, 9, 11, 12 or 15' CONFIG_OPL3SA2_MPU_IRQ 9
- fi
-
-
dep_tristate ' 6850 UART support' CONFIG_SOUND_UART6850 $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_UART6850" = "y" ]; then
- hex 'I/O base for UART 6850 MIDI port (Unknown)' CONFIG_U6850_BASE 0
- int 'UART6850 IRQ (Unknown)' CONFIG_U6850_IRQ -1
- fi
if [ "$CONFIG_ARM" = "y" ]; then
dep_tristate ' VIDC 16-bit sound' CONFIG_SOUND_VIDC $CONFIG_SOUND_OSS
dep_tristate ' Netwinder WaveArtist' CONFIG_SOUND_WAVEARTIST $CONFIG_SOUND_OSS
- if [ "$CONFIG_SOUND_WAVEARTIST" != "n" ]; then
- hex ' WaveArtist I/O base' CONFIG_WAVEARTIST_BASE 250
- int ' WaveArtist IRQ' CONFIG_WAVEARTIST_IRQ 12
- int ' WaveArtist DMA' CONFIG_WAVEARTIST_DMA 3
- int ' WaveArtist second DMA' CONFIG_WAVEARTIST_DMA2 7
- fi
fi
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)