patch-2.3.51 linux/drivers/usb/usb-serial.h

Next file: linux/drivers/usb/usb-storage.c
Previous file: linux/drivers/usb/usb-serial.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.50/linux/drivers/usb/usb-serial.h linux/drivers/usb/usb-serial.h
@@ -1,436 +0,0 @@
-/*
- * USB Serial Converter driver
- *
- *	(C) Copyright (C) 1999, 2000
- *	    Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- * 
- */
-
-
-#ifndef __LINUX_USB_SERIAL_H
-#define __LINUX_USB_SERIAL_H
-
-#include <linux/config.h>
-
-/* Module information */
-MODULE_AUTHOR("Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux-usb/");
-MODULE_DESCRIPTION("USB Serial Driver");
-
-#ifdef CONFIG_USB_SERIAL_GENERIC
-static __u16	vendor	= 0x05f9;
-static __u16	product	= 0xffff;
-MODULE_PARM(vendor, "i");
-MODULE_PARM_DESC(vendor, "User specified USB idVendor");
-
-MODULE_PARM(product, "i");
-MODULE_PARM_DESC(product, "User specified USB idProduct");
-#endif
-
-
-/* USB Serial devices vendor ids and device ids that this driver supports */
-#define CONNECT_TECH_VENDOR_ID		0x0710
-#define CONNECT_TECH_FAKE_WHITE_HEAT_ID	0x0001
-#define CONNECT_TECH_WHITE_HEAT_ID	0x8001
-#define HANDSPRING_VENDOR_ID		0x082d
-#define HANDSPRING_VISOR_ID		0x0100
-#define FTDI_VENDOR_ID			0x0403
-#define FTDI_SIO_SERIAL_CONVERTER_ID	0x8372
-#define KEYSPAN_VENDOR_ID		0x06cd
-#define KEYSPAN_PDA_FAKE_ID		0x0103
-#define KEYSPAN_PDA_ID			0x0104 /* no clue */
-
-#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	16	/* Actually we are allowed 255, but this is good for now */
-
-
-#define MAX_NUM_PORTS	8	/* The maximum number of ports one device can grab at once */
-
-
-struct usb_serial_port {
-	struct usb_serial	*serial;	/* pointer back to the owner of this port */
-	struct tty_struct *	tty;		/* the coresponding tty for this device */
-	unsigned char		minor;
-	unsigned char		number;
-	char			active;		/* someone has this device open */
-
-	struct usb_endpoint_descriptor * interrupt_in_endpoint;
-	__u8			interrupt_in_interval;
-	unsigned char *		interrupt_in_buffer;
-	struct urb		control_urb;
-
-	unsigned char *		bulk_in_buffer;
-	struct urb		read_urb;
-
-	unsigned char *		bulk_out_buffer;
-	int			bulk_out_size;
-	struct urb		write_urb;
-	void *			private;	/* data private to the specific driver */
-};
-
-struct usb_serial {
-	struct usb_device *		dev;
-	struct usb_serial_device_type *	type;
-	struct tty_struct *		tty;			/* the coresponding tty for this device */
-	unsigned char			minor;
-	unsigned char			num_ports;		/* the number of ports this device has */
-	char				num_interrupt_in;	/* number of interrupt in endpoints we have */
-	char				num_bulk_in;		/* number of bulk in endpoints we have */
-	char				num_bulk_out;		/* number of bulk out endpoints we have */
-	struct usb_serial_port		port[MAX_NUM_PORTS];
-
-	/* FIXME! These should move to the private area of the keyspan driver */
-	int			tx_room;
-	int			tx_throttled;
-	wait_queue_head_t 	write_wait;
-
-	void *			private;		/* data private to the specific driver */
-};
-
-
-#define MUST_HAVE_NOT	0x01
-#define MUST_HAVE	0x02
-#define DONT_CARE	0x03
-
-#define	HAS		0x02
-#define HAS_NOT		0x01
-
-#define NUM_DONT_CARE	(-1)
-
-
-/* This structure defines the individual serial converter. */
-struct usb_serial_device_type {
-	char	*name;
-	__u16	*idVendor;
-	__u16	*idProduct;
-	char	needs_interrupt_in;
-	char	needs_bulk_in;
-	char	needs_bulk_out;
-	char	num_interrupt_in;
-	char	num_bulk_in;
-	char	num_bulk_out;
-	char	num_ports;		/* number of serial ports this device has */
-
-	/* function call to make before accepting driver */
-	int (*startup) (struct usb_serial *serial);	/* return 0 to continue initialization, anything else to abort */
-	
-	/* serial function calls */
-	int  (*open)(struct tty_struct * tty, struct file * filp);
-	void (*close)(struct tty_struct * tty, struct file * filp);
-	int  (*write)(struct tty_struct * tty, int from_user,const unsigned char *buf, int count);
-	int  (*write_room)(struct tty_struct *tty);
-	int  (*ioctl)(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-	void (*set_termios)(struct tty_struct *tty, struct termios * old);
-	void (*break_ctl)(struct tty_struct *tty, int break_state);
-	int  (*chars_in_buffer)(struct tty_struct *tty);
-	void (*throttle)(struct tty_struct * tty);
-	void (*unthrottle)(struct tty_struct * tty);
-	
-	void (*read_bulk_callback)(struct urb *urb);
-	void (*write_bulk_callback)(struct urb *urb);
-};
-
-
-/* function prototypes for a "generic" type serial converter (no flow control, not all endpoints needed) */
-/* need to always compile these in, as some of the other devices use these functions as their own. */
-/* if a driver does not provide a function pointer, the generic function will be called. */
-static int  generic_serial_open		(struct tty_struct *tty, struct file *filp);
-static void generic_serial_close	(struct tty_struct *tty, struct file *filp);
-static int  generic_serial_write	(struct tty_struct *tty, int from_user, const unsigned char *buf, int count);
-static int  generic_write_room		(struct tty_struct *tty);
-static int  generic_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void generic_set_termios		(struct tty_struct *tty, struct termios * old);
-static int  generic_chars_in_buffer	(struct tty_struct *tty);
-static void generic_throttle		(struct tty_struct *tty);
-static void generic_unthrottle		(struct tty_struct *tty);
-static void generic_read_bulk_callback	(struct urb *urb);
-static void generic_write_bulk_callback	(struct urb *urb);
-
-
-#ifdef CONFIG_USB_SERIAL_GENERIC
-/* All of the device info needed for the Generic Serial Converter */
-static struct usb_serial_device_type generic_device = {
-	name:			"Generic",
-	idVendor:		&vendor,		/* use the user specified vendor id */
-	idProduct:		&product,		/* use the user specified product id */
-	needs_interrupt_in:	DONT_CARE,		/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,		/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,		/* don't have to have a bulk out endpoint */
-	num_interrupt_in:	NUM_DONT_CARE,
-	num_bulk_in:		NUM_DONT_CARE,
-	num_bulk_out:		NUM_DONT_CARE,
-	num_ports:		1,
-};
-#endif
-
-
-#ifdef CONFIG_USB_SERIAL_WHITEHEAT
-/* function prototypes for the Connect Tech WhiteHEAT serial converter */
-static int  whiteheat_serial_open	(struct tty_struct *tty, struct file *filp);
-static void whiteheat_serial_close	(struct tty_struct *tty, struct file *filp);
-static void whiteheat_set_termios	(struct tty_struct *tty, struct termios * old);
-static void whiteheat_throttle		(struct tty_struct *tty);
-static void whiteheat_unthrottle	(struct tty_struct *tty);
-static int  whiteheat_startup		(struct usb_serial *serial);
-
-/* All of the device info needed for the Connect Tech WhiteHEAT */
-static __u16	connecttech_vendor_id			= CONNECT_TECH_VENDOR_ID;
-static __u16	connecttech_whiteheat_fake_product_id	= CONNECT_TECH_FAKE_WHITE_HEAT_ID;
-static __u16	connecttech_whiteheat_product_id	= CONNECT_TECH_WHITE_HEAT_ID;
-static struct usb_serial_device_type whiteheat_fake_device = {
-	name:			"Connect Tech - WhiteHEAT - (prerenumeration)",
-	idVendor:		&connecttech_vendor_id,			/* the Connect Tech vendor id */
-	idProduct:		&connecttech_whiteheat_fake_product_id,	/* the White Heat initial product id */
-	needs_interrupt_in:	DONT_CARE,				/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,				/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,				/* don't have to have a bulk out endpoint */
-	num_interrupt_in:	NUM_DONT_CARE,
-	num_bulk_in:		NUM_DONT_CARE,
-	num_bulk_out:		NUM_DONT_CARE,
-	startup:		whiteheat_startup	
-};
-static struct usb_serial_device_type whiteheat_device = {
-	name:			"Connect Tech - WhiteHEAT",
-	idVendor:		&connecttech_vendor_id,			/* the Connect Tech vendor id */
-	idProduct:		&connecttech_whiteheat_product_id,	/* the White Heat real product id */
-	needs_interrupt_in:	DONT_CARE,				/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,				/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,				/* don't have to have a bulk out endpoint */
-	num_interrupt_in:	NUM_DONT_CARE,
-	num_bulk_in:		NUM_DONT_CARE,
-	num_bulk_out:		NUM_DONT_CARE,
-	num_ports:		4,
-	open:			whiteheat_serial_open,
-	close:			whiteheat_serial_close,
-	throttle:		whiteheat_throttle,
-	unthrottle:		whiteheat_unthrottle,
-	set_termios:		whiteheat_set_termios,
-};
-#endif
-
-
-#ifdef CONFIG_USB_SERIAL_VISOR
-
-/****************************************************************************
- * Handspring Visor Vendor specific request codes (bRequest values)
- * A big thank you to Handspring for providing the following information.
- * If anyone wants the original file where these values and structures came
- * from, send email to <greg@kroah.com>.
- ****************************************************************************/
-
-/****************************************************************************
- * VISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that
- * are available to be transfered to the host for the specified endpoint.
- * Currently this is not used, and always returns 0x0001
- ****************************************************************************/
-#define VISOR_REQUEST_BYTES_AVAILABLE		0x01
-
-/****************************************************************************
- * VISOR_CLOSE_NOTIFICATION is set to the device to notify it that the host
- * is now closing the pipe. An empty packet is sent in response.
- ****************************************************************************/
-#define VISOR_CLOSE_NOTIFICATION		0x02
-
-/****************************************************************************
- * VISOR_GET_CONNECTION_INFORMATION is sent by the host during enumeration to
- * get the endpoints used by the connection.
- ****************************************************************************/
-#define VISOR_GET_CONNECTION_INFORMATION	0x03
-
-
-/****************************************************************************
- * VISOR_GET_CONNECTION_INFORMATION returns data in the following format
- ****************************************************************************/
-struct visor_connection_info {
-	__u16	num_ports;
-	struct {
-		__u8	port_function_id;
-		__u8	port;
-	} connections[2];
-};
-
-
-/* struct visor_connection_info.connection[x].port defines: */
-#define VISOR_ENDPOINT_1		0x01
-#define VISOR_ENDPOINT_2		0x02
-
-/* struct visor_connection_info.connection[x].port_function_id defines: */
-#define VISOR_FUNCTION_GENERIC		0x00
-#define VISOR_FUNCTION_DEBUGGER		0x01
-#define VISOR_FUNCTION_HOTSYNC		0x02
-#define VISOR_FUNCTION_CONSOLE		0x03
-#define VISOR_FUNCTION_REMOTE_FILE_SYS	0x04
-
-
-/* function prototypes for a handspring visor */
-static int  visor_serial_open		(struct tty_struct *tty, struct file *filp);
-static void visor_serial_close		(struct tty_struct *tty, struct file *filp);
-static void visor_throttle		(struct tty_struct *tty);
-static void visor_unthrottle		(struct tty_struct *tty);
-static int  visor_startup		(struct usb_serial *serial);
-
-/* All of the device info needed for the Handspring Visor */
-static __u16	handspring_vendor_id	= HANDSPRING_VENDOR_ID;
-static __u16	handspring_product_id	= HANDSPRING_VISOR_ID;
-static struct usb_serial_device_type handspring_device = {
-	name:			"Handspring Visor",
-	idVendor:		&handspring_vendor_id,	/* the Handspring vendor ID */
-	idProduct:		&handspring_product_id,	/* the Handspring Visor product id */
-	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
-	num_interrupt_in:	0,
-	num_bulk_in:		2,
-	num_bulk_out:		2,
-	num_ports:		2,
-	open:			visor_serial_open,
-	close:			visor_serial_close,
-	throttle:		visor_throttle,
-	unthrottle:		visor_unthrottle,
-	startup:		visor_startup,
-};
-#endif
-
-
-#ifdef CONFIG_USB_SERIAL_FTDI_SIO
-/* function prototypes for a FTDI serial converter */
-static int  ftdi_sio_serial_open	(struct tty_struct *tty, struct file *filp);
-static void ftdi_sio_serial_close	(struct tty_struct *tty, struct file *filp);
-static int  ftdi_sio_serial_write	(struct tty_struct *tty, int from_user, const unsigned char *buf, int count);
-static void ftdi_sio_read_bulk_callback	(struct urb *urb);
-static void ftdi_sio_set_termios		(struct tty_struct *tty, struct termios * old);
-static int ftdi_sio_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-
-/* All of the device info needed for the FTDI SIO serial converter */
-static __u16	ftdi_vendor_id		= FTDI_VENDOR_ID;
-static __u16	ftdi_sio_product_id	= FTDI_SIO_SERIAL_CONVERTER_ID;
-static struct usb_serial_device_type ftdi_sio_device = {
-	name:			"FTDI SIO",
-	idVendor:		&ftdi_vendor_id,	/* the FTDI vendor ID */
-	idProduct:		&ftdi_sio_product_id,	/* the FTDI SIO product id */
-	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
-	num_interrupt_in:	0,
-	num_bulk_in:		1,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			ftdi_sio_serial_open,
-	close:			ftdi_sio_serial_close,
-	write:			ftdi_sio_serial_write,
-	read_bulk_callback:	ftdi_sio_read_bulk_callback,
-	set_termios:		ftdi_sio_set_termios
-};
-#endif
-
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_PDA
-/* function prototypes for a Keyspan PDA serial converter */
-static int  keyspan_pda_serial_open	(struct tty_struct *tty, 
-					 struct file *filp);
-static void keyspan_pda_serial_close	(struct tty_struct *tty, 
-					 struct file *filp);
-static int  keyspan_pda_startup		(struct usb_serial *serial);
-static void keyspan_pda_rx_throttle	(struct tty_struct *tty);
-static void keyspan_pda_rx_unthrottle	(struct tty_struct *tty);
-static int  keyspan_pda_setbaud		(struct usb_serial *serial, int baud);
-static int  keyspan_pda_write_room	(struct tty_struct *tty);
-static int  keyspan_pda_write		(struct tty_struct *tty,
-					 int from_user,
-					 const unsigned char *buf,
-					 int count);
-static void keyspan_pda_write_bulk_callback (struct urb *urb);
-static int  keyspan_pda_chars_in_buffer (struct tty_struct *tty);
-static int  keyspan_pda_ioctl		(struct tty_struct *tty,
-					 struct file *file,
-					 unsigned int cmd,
-					 unsigned long arg);
-static void keyspan_pda_set_termios	(struct tty_struct *tty,
-					 struct termios *old);
-static void keyspan_pda_break_ctl	(struct tty_struct *tty,
-					 int break_state);
-static int  keyspan_pda_fake_startup	(struct usb_serial *serial);
-
-/* All of the device info needed for the Keyspan PDA serial converter */
-static __u16	keyspan_vendor_id		= KEYSPAN_VENDOR_ID;
-static __u16	keyspan_pda_fake_product_id	= KEYSPAN_PDA_FAKE_ID;
-static __u16	keyspan_pda_product_id		= KEYSPAN_PDA_ID;
-static struct usb_serial_device_type keyspan_pda_fake_device = {
-	name:			"Keyspan PDA - (prerenumeration)",
-	idVendor:		&keyspan_vendor_id,		/* the Keyspan PDA vendor ID */
-	idProduct:		&keyspan_pda_fake_product_id,	/* the Keyspan PDA initial product id */
-	needs_interrupt_in:	DONT_CARE,			/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,			/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,			/* don't have to have a bulk out endpoint */
-	num_interrupt_in:	NUM_DONT_CARE,
-	num_bulk_in:		NUM_DONT_CARE,
-	num_bulk_out:		NUM_DONT_CARE,
-	startup:		keyspan_pda_fake_startup
-};
-static struct usb_serial_device_type keyspan_pda_device = {
-	name:			"Keyspan PDA",
-	idVendor:		&keyspan_vendor_id,		/* the Keyspan PDA vendor ID */
-	idProduct:		&keyspan_pda_product_id,	/* the Keyspan PDA product id */
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		MUST_HAVE,
-	num_interrupt_in:	1,
-	num_bulk_in:		0,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			keyspan_pda_serial_open,
-	close:			keyspan_pda_serial_close,
-	write:			keyspan_pda_write,
-	write_room:		keyspan_pda_write_room,
-	write_bulk_callback: 	keyspan_pda_write_bulk_callback,
-	chars_in_buffer:	keyspan_pda_chars_in_buffer,
-	throttle:		keyspan_pda_rx_throttle,
-	unthrottle:		keyspan_pda_rx_unthrottle,
-	startup:		keyspan_pda_startup,
-	ioctl:			keyspan_pda_ioctl,
-	set_termios:		keyspan_pda_set_termios,
-	break_ctl:		keyspan_pda_break_ctl,
-};
-#endif
-
-
-/* To add support for another serial converter, create a usb_serial_device_type
-   structure for that device, and add it to this list, making sure that the
-   last  entry is NULL. */
-static struct usb_serial_device_type *usb_serial_devices[] = {
-#ifdef CONFIG_USB_SERIAL_GENERIC
-	&generic_device,
-#endif
-#ifdef CONFIG_USB_SERIAL_WHITEHEAT
-	&whiteheat_fake_device,
-	&whiteheat_device,
-#endif
-#ifdef CONFIG_USB_SERIAL_VISOR
-	&handspring_device,
-#endif
-#ifdef CONFIG_USB_SERIAL_FTDI_SIO
-	&ftdi_sio_device,
-#endif
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_PDA
-	&keyspan_pda_fake_device,
-	&keyspan_pda_device,
-#endif
-	NULL
-};
-
-
-/* determine if we should include the EzUSB loader functions */
-#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_WHITEHEAT)
-	#define	USES_EZUSB_FUNCTIONS
-#else
-	#undef 	USES_EZUSB_FUNCTIONS
-#endif
-
-#endif	/* ifdef __LINUX_USB_SERIAL_H */
-
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)