patch-2.3.7 linux/arch/arm/config.in

• Lines: 262
• Date: Thu Jun 17 01:11:35 1999
• Orig file: v2.3.6/linux/arch/arm/config.in
• Orig date: Thu Jan 14 10:29:28 1999

diff -u --recursive --new-file v2.3.6/linux/arch/arm/config.in linux/arch/arm/config.in
@@ -14,18 +14,31 @@
 	 A5000			CONFIG_ARCH_A5K \
 	 RiscPC			CONFIG_ARCH_RPC \
 	 EBSA-110		CONFIG_ARCH_EBSA110 \
-	 EBSA-285		CONFIG_ARCH_EBSA285 \
-	 NexusPCI		CONFIG_ARCH_NEXUSPCI \
-	 Corel-VNC		CONFIG_ARCH_VNC \
-	 Tbox			CONFIG_ARCH_TBOX" RiscPC
+	 FootBridge-based	CONFIG_FOOTBRIDGE" RiscPC
 
-if [ "$CONFIG_ARCH_EBSA285" = "y" ]; then
-  bool '  Include support for CATS boards' CONFIG_CATS
+if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
+  bool 'FootBridge in HOST mode'	CONFIG_HOST_FOOTBRIDGE
+  if [ "$CONFIG_HOST_FOOTBRIDGE" = "y" ]; then
+    define_bool CONFIG_ADDIN_FOOTBRIDGE n
+  else
+    define_bool CONFIG_ADDIN_FOOTBRIDGE y
+  fi
+fi
+
+if [ "$CONFIG_HOST_FOOTBRIDGE" = "y" ]; then
+  bool '  Include support for Intel EBSA285' CONFIG_ARCH_EBSA285
+  bool '  Include support for Chalice CATS boards' CONFIG_CATS
+  bool '  Include support for Corel NetWinder' CONFIG_ARCH_NETWINDER
+fi
+
+if [ "$CONFIG_ADDIN_FOOTBRIDGE" = "y" ]; then
+  # If we get any other footbridge-based plug-in boards, then
+  # add your architecture options here
+  define_bool CONFIG_ARCH_CO285 y
 fi
 
 # Select various configuration options depending on the machine type
 #  Easy check for Acorn-style architectures
-
 if [ "$CONFIG_ARCH_ARC" = "y" -o \
      "$CONFIG_ARCH_A5K" = "y" -o \
      "$CONFIG_ARCH_RPC" = "y" ]; then
@@ -34,23 +47,19 @@
   define_bool CONFIG_ARCH_ACORN n
 fi
 
-if [ "$CONFIG_ARCH_TBOX" = "y" ]; then
-  define_bool CONFIG_BUS_I2C y
-fi
+#if [ "$CONFIG_ARCH_TBOX" = "y" ]; then
+#  define_bool CONFIG_BUS_I2C y
+#fi
 
 #  These machines always have PCI
-
 if [ "$CONFIG_ARCH_NEXUSPCI" = "y" -o \
-     "$CONFIG_ARCH_VNC" = "y" ]; then
+     "$CONFIG_HOST_FOOTBRIDGE" = "y" ]; then
   define_bool CONFIG_PCI y
 fi
-if [ "$CONFIG_ARCH_EBSA285" = "y" ]; then
-  bool "PCI support" CONFIG_PCI
-fi
 
 # These machines have ISA-DMA
 if [ "$CONFIG_CATS" = "y" -o \
-     "$CONFIG_ARCH_VNC" = "y" ]; then
+     "$CONFIG_ARCH_NETWINDER" = "y" ]; then
   define_bool CONFIG_ISA_DMA y
 else
   define_bool CONFIG_ISA_DMA n
@@ -59,7 +68,6 @@
 # Figure out whether this system uses 26-bit or 32-bit CPUs.  Nobody has
 # ever built a machine that can take both, and now that ARM3 is obsolete
 # nobody is likely to either.
-
 if [ "$CONFIG_ARCH_ARC" = "y" -o \
      "$CONFIG_ARCH_A5K" = "y" ]; then
   define_bool CONFIG_CPU_32 n
@@ -71,7 +79,6 @@
 
 # Now allow the user to choose a more precise CPU.  This is only used to set
 # the flags we pass to GCC, not in any code.
-
 choice 'Optimise for CPU'				\
 	"ARM2		CONFIG_CPU_ARM2 \
 	 ARM3		CONFIG_CPU_ARM3 \
@@ -80,22 +87,21 @@
 	 SA110		CONFIG_CPU_SA110" ARM6
 
 if [ "$CONFIG_CPU_26" = "y" ]; then
-
 # For 26-bit CPUs, the page size changes with the amount of physical RAM!
 # The default is 4MB but if the user has less they have to own up to it here.
-
   choice 'Physical memory size'		\
 	"4MB+		CONFIG_PAGESIZE_32	\
-	 2MB		CONFIG_PAGESIZE_16	\
-	 1MB/512K	CONFIG_PAGESIZE_8" 4MB+
+	 2MB		CONFIG_PAGESIZE_16" 4MB+
 fi
 endmenu
 
 mainmenu_option next_comment
 comment 'Code maturity level options'
 bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-bool 'Use new compilation options (for GCC 2.8)' CONFIG_BINUTILS_NEW
-bool 'Compile kernel with frame pointer (for useful debugging)' CONFIG_FRAME_POINTER
+if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
+  bool 'Enable kernel-mode alignment trap handler (EXPERIMENTAL)' CONFIG_ALIGNMENT_TRAP
+fi
+bool 'Split text into discardable sections' CONFIG_TEXT_SECTIONS
 endmenu
 
 mainmenu_option next_comment
@@ -113,13 +119,19 @@
 bool 'System V IPC' CONFIG_SYSVIPC
 bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
 bool 'Sysctl support' CONFIG_SYSCTL
+tristate 'Math emulation' CONFIG_NWFPE
 tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
+if [ "$CONFIG_CPU_32" = "y" ]; then
+  tristate 'RISC OS personality' CONFIG_ARTHUR
+fi
 
 tristate 'Parallel port support' CONFIG_PARPORT
 if [ "$CONFIG_PARPORT" != "n" ]; then
-  dep_tristate '  Archimedes hardware' CONFIG_PARPORT_ARC $CONFIG_PARPORT
+  if [ "$CONFIG_ARCH_ARC" = "y" ]; then
+    dep_tristate '  Archimedes hardware' CONFIG_PARPORT_ARC $CONFIG_PARPORT
+  fi
   dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
 # If exactly one hardware type is selected then parport will optimise away
 # support for loading any others.  Defeat this if the user is keen.
@@ -129,13 +141,29 @@
     fi
   fi
 fi
-if [ "$CONFIG_ARCH_EBSA285" = "y" -o \
-     "$CONFIG_ARCH_EBSA110" = "y" -o \
-     "$CONFIG_ARCH_VNC" = "y" ]; then
+if [ "$CONFIG_ARCH_EBSA110" = "y" -o \
+     "$CONFIG_ARCH_NETWINDER" = "y" -o \
+     "$CONFIG_CATS" = "y" ]; then
   string 'Initial kernel command string' CONFIG_CMDLINE
 fi
+if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
+     "$CONFIG_ARCH_EBSA110" = "y" -o   \
+     "$CONFIG_ARCH_EBSA285" = "y" -o   \
+     "$CONFIG_ARCH_CO285" = "y" ]; then
+  bool 'Timer and CPU usage LEDs' CONFIG_LEDS
+  if [ "$CONFIG_LEDS" = "y" ]; then
+    if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
+         "$CONFIG_ARCH_EBSA285" = "y" -o   \
+	 "$CONFIG_ARCH_CO285" = "y" ]; then
+      bool '  Timer LED' CONFIG_LEDS_TIMER
+      bool '  CPU usage LED' CONFIG_LEDS_CPU
+    fi
+  fi
+fi
 endmenu
 
+source drivers/i2o/Config.in
+
 source drivers/pnp/Config.in
 
 source drivers/block/Config.in
@@ -144,15 +172,19 @@
   source drivers/acorn/block/Config.in
 fi
 
-if [ "$CONFIG_VGA_CONSOLE" = "n" -a "$CONFIG_FB" = "n" ]; then
-  source arch/arm/drivers/char/Config.in
-else
-  source drivers/char/Config.in
-fi
+source drivers/char/Config.in
 if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
-  source drivers/acorn/char/Config.in
+  if [ "$CONFIG_MOUSE" = "y" ]; then
+    if [ "$CONFIG_ARCH_RPC" != "y" ]; then
+      define_bool CONFIG_KBDMOUSE y
+    else
+      define_bool CONFIG_RPCMOUSE y
+    fi
+  fi
 fi
 
+source drivers/usb/Config.in
+
 if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
@@ -166,9 +198,11 @@
 
 if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
-fi
 
-if [ "$CONFIG_NET" = "y" ]; then
+  source net/ax25/Config.in
+
+  source net/irda/Config.in
+
   mainmenu_option next_comment
   comment 'Network device support'
 
@@ -179,6 +213,15 @@
   endmenu
 fi
 
+# mainmenu_option next_comment
+# comment 'ISDN subsystem'
+#
+# tristate 'ISDN support' CONFIG_ISDN
+# if [ "$CONFIG_ISDN" != "n" ]; then
+#   source drivers/isdn/Config.in
+# fi
+# endmenu
+
 mainmenu_option next_comment
 comment 'SCSI support'
 
@@ -200,21 +243,29 @@
   endmenu
 fi
 
-# mainmenu_option next_comment
-# comment 'ISDN subsystem'
-#
-# tristate 'ISDN support' CONFIG_ISDN
-# if [ "$CONFIG_ISDN" != "n" ]; then
-#   source drivers/isdn/Config.in
-# fi
-# endmenu
-
 source fs/Config.in
 
 mainmenu_option next_comment
 comment 'Kernel hacking'
 
-bool 'Debug kernel errors' CONFIG_DEBUG_ERRORS
+bool 'Compile kernel with frame pointer (for useful debugging)' CONFIG_FRAME_POINTER
+bool 'Verbose kernel error messages' CONFIG_DEBUG_ERRORS
+bool 'Verbose user fault messages' CONFIG_DEBUG_USER
+bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO
 #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
 bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+  if [ "$CONFIG_CPU_26" = "y" ]; then
+    bool 'Disable pgtable cache (EXPERIMENTAL)' CONFIG_NO_PGT_CACHE
+  fi
+
+  # These options are only for real kernel hackers
+  # who want to get their hands dirty. 
+  bool 'Kernel low-level debugging functions' CONFIG_DEBUG_LL
+  if [ "$CONFIG_DEBUG_LL" = "y" ]; then
+    if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
+      bool 'Kernel low-level debugging messages via DC21285 port' CONFIG_DEBUG_DC21285_PORT
+    fi
+  fi
+fi
 endmenu