patch-2.3.99-pre6 linux/drivers/sound/emu10k1/8010.h
Next file: linux/drivers/sound/emu10k1/Makefile
Previous file: linux/drivers/sound/dmasound/dmasound_q40.c
Back to the patch index
Back to the overall index
- Lines: 663
- Date:
Fri Apr 21 16:08:45 2000
- Orig file:
v2.3.99-pre5/linux/drivers/sound/emu10k1/8010.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.99-pre5/linux/drivers/sound/emu10k1/8010.h linux/drivers/sound/emu10k1/8010.h
@@ -0,0 +1,662 @@
+/*
+ **********************************************************************
+ * 8010.h
+ * Copyright 1999, 2000 Creative Labs, Inc.
+ *
+ **********************************************************************
+ *
+ * Date Author Summary of changes
+ * ---- ------ ------------------
+ * October 20, 1999 Bertrand Lee base code release
+ * November 2, 1999 Alan Cox Cleaned of 8bit chars, DOS
+ * line endings
+ * December 8, 1999 Jon Taylor Added lots of new register info
+ *
+ **********************************************************************
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ *
+ *
+ **********************************************************************
+ */
+
+
+#ifndef _8010_H
+#define _8010_H
+
+/* ------------------- DEFINES -------------------- */
+
+#define EMUPAGESIZE 4096 /* don't change */
+#define RESERVED 0
+#define NUM_G 64 /* use all channels */
+#define NUM_FXSENDS 4 /* don't change */
+#define MAXPAGES (32768 * NUM_G / EMUPAGESIZE) /* WAVEOUT_MAXBUFSIZE * NUM_G / EMUPAGESIZE */
+
+#define TMEMSIZE 256*1024
+#define TMEMSIZEREG 4
+
+#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
+
+/************************************************************************************************/
+/* PCI function 0 registers, address = <val> + PCIBASE0 */
+/************************************************************************************************/
+
+#define PTR 0x00 /* Indexed register set pointer register */
+ /* NOTE: The CHANNELNUM and ADDRESS words can */
+ /* be modified independently of each other. */
+#define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */
+ /* channel number of the register to be */
+ /* accessed. For non per-channel registers the */
+ /* value should be set to zero. */
+#define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */
+
+#define DATA 0x04 /* Indexed register set data register */
+
+#define IPR 0x08 /* Global interrupt pending register */
+ /* Clear pending interrupts by writing a 1 to */
+ /* the relevant bits and zero to the other bits */
+#define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */
+#define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */
+#define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */
+#define IPR_PCIERROR 0x00200000 /* PCI bus error */
+#define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */
+#define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */
+#define IPR_MUTE 0x00040000 /* Mute button pressed */
+#define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */
+#define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */
+#define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */
+#define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */
+#define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */
+#define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */
+#define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */
+#define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */
+#define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */
+#define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */
+#define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */
+#define IPR_CHANNELLOOP 0x00000040 /* One or more channel loop interrupts pending */
+#define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */
+ /* Highest set channel in CLIPL or CLIPH. When */
+ /* IP is written with CL set, the bit in CLIPL */
+ /* or CLIPH corresponding to the CIN value */
+ /* written will be cleared. */
+
+#define INTE 0x0c /* Interrupt enable register */
+#define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */
+#define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */
+#define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */
+#define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */
+#define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */
+#define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */
+#define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */
+#define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */
+#define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */
+#define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */
+#define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */
+#define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */
+#define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */
+#define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */
+#define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */
+#define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */
+#define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */
+#define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */
+
+#define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */
+ /* NOTE: There is no reason to use this under */
+ /* Linux, and it will cause odd hardware */
+ /* behavior and possibly random segfaults and */
+ /* lockups if enabled. */
+
+#define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */
+ /* NOTE: This bit must always be enabled */
+#define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */
+#define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */
+#define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */
+#define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */
+#define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */
+#define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */
+#define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */
+#define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */
+#define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */
+#define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */
+#define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */
+#define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */
+#define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */
+
+#define WC 0x10 /* Wall Clock register */
+#define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */
+#define WC_SAMPLECOUNTER 0x14060010
+#define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */
+ /* NOTE: Each channel takes 1/64th of a sample */
+ /* period to be serviced. */
+
+#define HCFG 0x14 /* Hardware config register */
+ /* NOTE: There is no reason to use the legacy */
+ /* SoundBlaster emulation stuff described below */
+ /* under Linux, and all kinds of weird hardware */
+ /* behavior can result if you try. Don't. */
+#define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */
+#define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */
+#define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */
+#define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */
+#define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */
+#define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */
+#define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */
+#define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */
+#define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */
+#define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */
+#define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */
+#define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */
+ /* NOTE: The rest of the bits in this register */
+ /* _are_ relevant under Linux. */
+#define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */
+#define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */
+#define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */
+#define HCFG_GPINPUT0 0x00004000 /* External pin112 */
+#define HCFG_GPINPUT1 0x00002000 /* External pin110 */
+#define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */
+#define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */
+#define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */
+ /* 1 = Force all 3 async digital inputs to use */
+ /* the same async sample rate tracker (ZVIDEO) */
+#define HCFG_AC3ENABLE_MASK 0x0x0000e0 /* AC3 async input control - Not implemented */
+#define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */
+#define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */
+#define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */
+ /* will automatically mute their output when */
+ /* they are not rate-locked to the external */
+ /* async audio source */
+#define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */
+ /* NOTE: This should generally never be used. */
+#define HCFG_LOCKTANKCACHE 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */
+ /* NOTE: This should generally never be used. */
+#define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */
+ /* NOTE: This is a 'cheap' way to implement a */
+ /* master mute function on the mute button, and */
+ /* in general should not be used unless a more */
+ /* sophisticated master mute function has not */
+ /* been written. */
+#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */
+ /* Should be set to 1 when the EMU10K1 is */
+ /* completely initialized. */
+
+#define MUDATA 0x18 /* MPU401 data register (8 bits) */
+
+#define MUCMD 0x19 /* MPU401 command register (8 bits) */
+#define MUCMD_RESET 0xff /* RESET command */
+#define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */
+ /* NOTE: All other commands are ignored */
+
+#define MUSTAT MUCMD /* MPU401 status register (8 bits) */
+#define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */
+#define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */
+
+#define TIMER 0x1a /* Timer terminal count register */
+ /* NOTE: After the rate is changed, a maximum */
+ /* of 1024 sample periods should be allowed */
+ /* before the new rate is guaranteed accurate. */
+#define TIMER_RATE_MASK 0x000003ff /* Timer interrupt rate in sample periods */
+ /* 0 == 1024 periods, [1..4] are not useful */
+#define TIMER_RATE 0x0a00001a
+
+#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */
+
+#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
+#define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */
+#define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */
+
+/************************************************************************************************/
+/* PCI function 1 registers, address = <val> + PCIBASE1 */
+/************************************************************************************************/
+
+#define JOYSTICK1 0x00 /* Analog joystick port register */
+#define JOYSTICK2 0x01 /* Analog joystick port register */
+#define JOYSTICK3 0x02 /* Analog joystick port register */
+#define JOYSTICK4 0x03 /* Analog joystick port register */
+#define JOYSTICK5 0x04 /* Analog joystick port register */
+#define JOYSTICK6 0x05 /* Analog joystick port register */
+#define JOYSTICK7 0x06 /* Analog joystick port register */
+#define JOYSTICK8 0x07 /* Analog joystick port register */
+
+/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write. */
+/* When reading, use these bitfields: */
+#define JOYSTICK_BUTTONS 0x0f /* Joystick button data */
+#define JOYSTICK_COMPARATOR 0xf0 /* Joystick comparator data */
+
+
+/********************************************************************************************************/
+/* AC97 pointer-offset register set, accessed through the AC97ADDRESS and AC97DATA registers */
+/********************************************************************************************************/
+
+#define AC97_RESET 0x00
+#define AC97_MASTERVOLUME 0x02 /* Master volume */
+#define AC97_HEADPHONEVOLUME 0x04 /* Headphone volume */
+#define AC97_MASTERVOLUMEMONO 0x06 /* Mast volume mono */
+#define AC97_MASTERTONE 0x08
+#define AC97_PCBEEPVOLUME 0x0a /* PC speaker system beep volume */
+#define AC97_PHONEVOLUME 0x0c
+#define AC97_MICVOLUME 0x0e
+#define AC97_LINEINVOLUME 0x10
+#define AC97_CDVOLUME 0x12
+#define AC97_VIDEOVOLUME 0x14
+#define AC97_AUXVOLUME 0x16
+#define AC97_PCMOUTVOLUME 0x18
+#define AC97_RECORDSELECT 0x1a
+#define AC97_RECORDGAIN 0x1c
+#define AC97_RECORDGAINMIC 0x1e
+#define AC97_GENERALPUPOSE 0x20
+#define AC97_3DCONTROL 0x22
+#define AC97_MODEMRATE 0x24
+#define AC97_POWERDOWN 0x26
+#define AC97_VENDORID1 0x7c
+#define AC97_VENDORID2 0x7e
+#define AC97_ZVIDEOVOLUME 0xec
+#define AC97_AC3VOLUME 0xed
+
+/********************************************************************************************************/
+/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */
+/********************************************************************************************************/
+
+#define CPF 0x00 /* Current pitch and fraction register */
+#define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */
+#define CPF_CURRENTPITCH 0x10100000
+#define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */
+#define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */
+#define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */
+
+#define PTRX 0x01 /* Pitch target and send A/B amounts register */
+#define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */
+#define PTRX_PITCHTARGET 0x10100001
+#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */
+#define PTRX_FXSENDAMOUNT_A 0x08080001
+#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */
+#define PTRX_FXSENDAMOUNT_B 0x08000001
+
+#define CVCF 0x02 /* Current volume and filter cutoff register */
+#define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */
+#define CVCF_CURRENTVOL 0x10100002
+#define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */
+#define CVCF_CURRENTFILTER 0x10000002
+
+#define VTFT 0x03 /* Volume target and filter cutoff target register */
+#define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */
+#define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */
+
+#define Z1 0x05 /* Filter delay memory 1 register */
+
+#define Z2 0x04 /* Filter delay memory 2 register */
+
+#define PSST 0x06 /* Send C amount and loop start address register */
+#define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */
+
+#define PSST_FXSENDAMOUNT_C 0x08180006
+
+#define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */
+#define PSST_LOOPSTARTADDR 0x18000006
+
+#define DSL 0x07 /* Send D amount and loop start address register */
+#define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */
+
+#define DSL_FXSENDAMOUNT_D 0x08180007
+
+#define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */
+#define DSL_LOOPENDADDR 0x18000007
+
+#define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */
+#define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */
+#define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */
+ /* 1 == full band, 7 == lowpass */
+ /* ROM 0 is used when pitch shifting downward or less */
+ /* then 3 semitones upward. Increasingly higher ROM */
+ /* numbers are used, typically in steps of 3 semitones, */
+ /* as upward pitch shifting is performed. */
+#define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */
+#define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */
+#define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */
+#define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */
+#define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */
+#define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */
+#define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */
+#define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */
+#define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */
+#define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */
+#define CCCA_CURRADDR 0x18000008
+
+#define CCR 0x09 /* Cache control register */
+#define CCR_CACHEINVALIDSIZE 0xfe000000 /* Number of invalid samples cache for this channel */
+#define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */
+#define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */
+#define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */
+#define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */
+#define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */
+ /* NOTE: This is valid only if CACHELOOPFLAG is set */
+#define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */
+#define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */
+
+#define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
+ /* NOTE: This register is normally not used */
+#define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */
+
+#define FXRT 0x0b /* Effects send routing register */
+ /* NOTE: It is illegal to assign the same routing to */
+ /* two effects sends. */
+#define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */
+#define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */
+#define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */
+#define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */
+
+#define MAPA 0x0c /* Cache map A */
+
+#define MAPB 0x0d /* Cache map B */
+
+#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
+#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
+
+#define ENVVOL 0x10 /* Volume envelope register */
+#define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define ATKHLDV 0x11 /* Volume envelope hold and attack register */
+#define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */
+#define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */
+#define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */
+ /* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */
+
+#define DCYSUSV 0x12 /* Volume envelope sustain and decay register */
+#define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
+#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
+#define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */
+ /* this channel and from writing to pitch, filter and */
+ /* volume targets. */
+#define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */
+ /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
+
+#define LFOVAL1 0x13 /* Modulation LFO value */
+#define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define ENVVAL 0x14 /* Modulation envelope register */
+#define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define ATKHLDM 0x15 /* Modulation envelope hold and attack register */
+#define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */
+#define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */
+#define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */
+ /* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */
+
+#define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */
+#define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
+#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
+#define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */
+ /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
+
+#define LFOVAL2 0x17 /* Vibrato LFO register */
+#define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define IP 0x18 /* Initial pitch register */
+#define IP_MASK 0x0000ffff /* Exponential initial pitch shift */
+ /* 4 bits of octave, 12 bits of fractional octave */
+#define IP_UNITY 0x0000e000 /* Unity pitch shift */
+
+#define IFATN 0x19 /* Initial filter cutoff and attenuation register */
+#define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */
+ /* 6 most significant bits are semitones */
+ /* 2 least significant bits are fractions */
+#define IFATN_FILTERCUTOFF 0x08080019
+#define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */
+#define IFATN_ATTENUATION 0x08000019
+
+
+#define PEFE 0x1a /* Pitch envelope and filter envelope amount register */
+#define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */
+ /* Signed 2's complement, +/- one octave peak extremes */
+#define PEFE_PITCHAMOUNT 0x0808001a
+#define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */
+ /* Signed 2's complement, +/- six octaves peak extremes */
+#define PEFE_FILTERAMOUNT 0x0800001a
+#define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */
+#define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */
+ /* Signed 2's complement, +/- one octave extremes */
+#define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */
+ /* Signed 2's complement, +/- three octave extremes */
+
+
+#define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */
+#define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */
+ /* Signed 2's complement, with +/- 12dB extremes */
+
+#define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */
+#define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */
+ /* Signed 2's complement, +/- one octave extremes */
+#define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */
+ /* 0.039Hz steps, maximum of 9.85 Hz. */
+
+#define TEMPENV 0x1e /* Tempory envelope register */
+#define TEMPENV_MASK 0x0000ffff /* 16-bit value */
+ /* NOTE: All channels contain internal variables; do */
+ /* not write to these locations. */
+
+#define CD0 0x20 /* Cache data 0 register */
+#define CD1 0x21 /* Cache data 1 register */
+#define CD2 0x22 /* Cache data 2 register */
+#define CD3 0x23 /* Cache data 3 register */
+#define CD4 0x24 /* Cache data 4 register */
+#define CD5 0x25 /* Cache data 5 register */
+#define CD6 0x26 /* Cache data 6 register */
+#define CD7 0x27 /* Cache data 7 register */
+#define CD8 0x28 /* Cache data 8 register */
+#define CD9 0x29 /* Cache data 9 register */
+#define CDA 0x2a /* Cache data A register */
+#define CDB 0x2b /* Cache data B register */
+#define CDC 0x2c /* Cache data C register */
+#define CDD 0x2d /* Cache data D register */
+#define CDE 0x2e /* Cache data E register */
+#define CDF 0x2f /* Cache data F register */
+
+#define PTB 0x40 /* Page table base register */
+#define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */
+
+#define TCB 0x41 /* Tank cache base register */
+#define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */
+
+#define ADCCR 0x42 /* ADC sample rate/stereo control register */
+#define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */
+#define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */
+ /* NOTE: To guarantee phase coherency, both channels */
+ /* must be disabled prior to enabling both channels. */
+#define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */
+#define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */
+#define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */
+#define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */
+#define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */
+#define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */
+#define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */
+#define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */
+#define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */
+
+#define FXWC 0x43 /* FX output write channels register */
+ /* When set, each bit enables the writing of the */
+ /* corresponding FX output channel into host memory */
+
+#define TCBS 0x44 /* Tank cache buffer size register */
+#define TCBS_MASK 0x00000007 /* Tank cache buffer size field */
+#define TCBS_BUFFSIZE_16K 0x00000000
+#define TCBS_BUFFSIZE_32K 0x00000001
+#define TCBS_BUFFSIZE_64K 0x00000002
+#define TCBS_BUFFSIZE_128K 0x00000003
+#define TCBS_BUFFSIZE_256K 0x00000004
+#define TCBS_BUFFSIZE_512K 0x00000005
+#define TCBS_BUFFSIZE_1024K 0x00000006
+#define TCBS_BUFFSIZE_2048K 0x00000007
+
+#define MICBA 0x45 /* AC97 microphone buffer address register */
+#define MICBA_MASK 0xfffff000 /* 20 bit base address */
+
+#define ADCBA 0x46 /* ADC buffer address register */
+#define ADCBA_MASK 0xfffff000 /* 20 bit base address */
+
+#define FXBA 0x47 /* FX Buffer Address */
+#define FXBA_MASK 0xfffff000 /* 20 bit base address */
+
+#define MICBS 0x49 /* Microphone buffer size register */
+
+#define ADCBS 0x4a /* ADC buffer size register */
+
+#define FXBS 0x4b /* FX buffer size register */
+
+/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
+#define ADCBS_BUFSIZE_NONE 0x00000000
+#define ADCBS_BUFSIZE_384 0x00000001
+#define ADCBS_BUFSIZE_448 0x00000002
+#define ADCBS_BUFSIZE_512 0x00000003
+#define ADCBS_BUFSIZE_640 0x00000004
+#define ADCBS_BUFSIZE_768 0x00000005
+#define ADCBS_BUFSIZE_896 0x00000006
+#define ADCBS_BUFSIZE_1024 0x00000007
+#define ADCBS_BUFSIZE_1280 0x00000008
+#define ADCBS_BUFSIZE_1536 0x00000009
+#define ADCBS_BUFSIZE_1792 0x0000000a
+#define ADCBS_BUFSIZE_2048 0x0000000b
+#define ADCBS_BUFSIZE_2560 0x0000000c
+#define ADCBS_BUFSIZE_3072 0x0000000d
+#define ADCBS_BUFSIZE_3584 0x0000000e
+#define ADCBS_BUFSIZE_4096 0x0000000f
+#define ADCBS_BUFSIZE_5120 0x00000010
+#define ADCBS_BUFSIZE_6144 0x00000011
+#define ADCBS_BUFSIZE_7168 0x00000012
+#define ADCBS_BUFSIZE_8192 0x00000013
+#define ADCBS_BUFSIZE_10240 0x00000014
+#define ADCBS_BUFSIZE_12288 0x00000015
+#define ADCBS_BUFSIZE_14366 0x00000016
+#define ADCBS_BUFSIZE_16384 0x00000017
+#define ADCBS_BUFSIZE_20480 0x00000018
+#define ADCBS_BUFSIZE_24576 0x00000019
+#define ADCBS_BUFSIZE_28672 0x0000001a
+#define ADCBS_BUFSIZE_32768 0x0000001b
+#define ADCBS_BUFSIZE_40960 0x0000001c
+#define ADCBS_BUFSIZE_49152 0x0000001d
+#define ADCBS_BUFSIZE_57344 0x0000001e
+#define ADCBS_BUFSIZE_65536 0x0000001f
+
+
+#define CDCS 0x50 /* CD-ROM digital channel status register */
+
+#define GPSCS 0x51 /* General Purpose SPDIF channel status register*/
+
+#define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define SPCS0 0x54 /* SPDIF output Channel Status 0 register */
+
+#define SPCS1 0x55 /* SPDIF output Channel Status 1 register */
+
+#define SPCS2 0x56 /* SPDIF output Channel Status 2 register */
+
+#define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */
+#define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */
+#define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */
+#define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */
+#define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */
+#define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */
+#define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */
+#define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */
+#define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */
+#define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */
+#define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */
+#define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */
+#define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */
+#define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */
+#define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */
+#define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */
+#define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */
+#define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */
+#define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */
+#define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */
+#define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */
+#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */
+#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */
+
+/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */
+#define CLIEL 0x58 /* Channel loop interrupt enable low register */
+
+#define CLIEH 0x59 /* Channel loop interrupt enable high register */
+
+#define CLIPL 0x5a /* Channel loop interrupt pending low register */
+
+#define CLIPH 0x5b /* Channel loop interrupt pending high register */
+
+#define SOLEL 0x5c /* Stop on loop enable low register */
+
+#define SOLEH 0x5d /* Stop on loop enable high register */
+
+#define SPBYPASS 0x5e /* SPDIF BYPASS mode register */
+#define SPBYPASS_ENABLE 0x00000001 /* Enable SPDIF bypass mode */
+
+#define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */
+
+#define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */
+
+#define ZVSRCS 0x62 /* ZVideo sample rate converter status */
+ /* NOTE: This one has no SPDIFLOCKED field */
+ /* Assumes sample lock */
+
+/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */
+#define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */
+#define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */
+#define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */
+
+#define MICIDX 0x63 /* Microphone recording buffer index register */
+#define MICIDX_MASK 0x0000ffff /* 16-bit value */
+#define MICIDX_IDX 0x10000063
+
+#define ADCIDX 0x64 /* ADC recording buffer index register */
+#define ADCIDX_MASK 0x0000ffff /* 16 bit index field */
+#define ADCIDX_IDX 0x10000064
+
+#define FXIDX 0x65 /* FX recording buffer index register */
+#define FXIDX_MASK 0x0000ffff /* 16-bit value */
+#define FXIDX_IDX 0x10000065
+
+/* Each FX general purpose register is 32 bits in length, all bits are used */
+#define FXGPREGBASE 0x100 /* FX general purpose registers base */
+
+/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */
+/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */
+/* locations are for external TRAM. */
+#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */
+#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */
+
+/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */
+#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
+#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
+#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
+#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
+#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
+
+#define MICROCODEBASE 0x400 /* Microcode data base address */
+
+/* Each DSP microcode instruction is mapped into 2 doublewords */
+/* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */
+#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */
+#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */
+#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */
+#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */
+#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */
+
+#endif /* _8010_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)