Version 0
# The version 0 module-info format is ('|' denotes the left margin):
# |<module-name>
# | <module-type> [<module-alias>]
# | "<description-string>"
# | <argument> "<argument-description-string>" ["<match-regex>" ["<default>"]]
# |# <comment>
# Stanzas are delimited by non-indented lines, and continued with indented lines.
# Comments start in the first column, or are preceded only by whitespace.
# The []'s above are not literal, they delimit optional material.
# There can be multiple <argument> lines.
# <module-name> is the name of the module without any .ko extension, just
# as the module name would be entered in /etc/modules.conf
# <module-type> is the base part of the string demanded by kerneld (eth,
# scsi_hostadapter, etc.)
# <module-alias> is an optional identifier to identify groups of similar
# drivers, such as the non-scsi cdrom devices which are requested by
# block-major-*; they are given an alias of "cdrom".
# <description-string> is a free-form string enclosed in quotes to describe
# the module to a human reader
# <argument> is an argument such as io or irq, as understood by the module
# <argument-description-string> is a free-form description
# <match-regex> is a regular expression which can be used to test the
# validity of a user-entered string
# <default> is a default value. This should not be provided unless it is
# almost always the correct value, and will not, say, hang a user's computer
# if it is wrong
#
# Ideas for version 1 file format:
# o Add long description, presumably including all known cards supported
# by the module in question
# o Sub-argument description, for arguments which have multiple parts
# separated by commas, particularly ones which share code with boot-time
# arguments.
# o Optional architecture flag(?)
# drivers/net directory
3c501
eth
"3Com 3c501"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
3c503
eth
"3Com EtherLink II"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
xcvr "Transceiver (0 = BNC; 1 = AUI)" "[01]"
3c505
eth
"3Com Etherlink Plus"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
3c507
eth
"3Com EtherLink16"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
3c509
eth
"3Com EtherLink III"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
3c515
eth
"3Com 3c515 Corkscrew"
3c59x
eth
"3Com 3c590/3c595/3c90x/3cx980"
8021q
eth
"802.1q VLAN device driver"
82596
eth
"Apricot 82596"
#a2065
# eth
# "Amiga Linux/68k A2065"
acenic
eth
"Alteon AceNIC Gigabit"
amd8111e
eth
"AMD8111 based 10/100 Ethernet Controller"
#aironet4500_card
# eth
# "Aironet 4500 PCI-ISA-i365 wireless"
arlan
eth
"Aironet Arlan 655"
#apricot
# eth
# "Apricot 82596"
# io "Base I/O address" "0x[0-9a-fA-F]+"
# irq "IRQ level" "[0-9]+"
#arcnet
# arc
# "ARCnet for IP driver"
# io "Base I/O address" "0x[0-9a-fA-F]+"
# irq "IRQ level" "[0-9]+"
# shmem "Base shared memory address" "0x[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]+"
#ariadne
# eth
# "Amiga Linux/m68k Ariadne"
at1700
eth
"Allied Telesis AT1700"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
#atarilance
# eth
# "Atari Linux/m68k VME Lance"
# Not yet modularized
#atp
# atp
# "Attached (pocket) ethernet adapter"
b44
eth
"Broadcom 4400 10/100 PCI ethernet adapter"
be2net
eth
"ServerEngines BladeEngine 2 10Gb NIC Driver"
be2iscsi
eth
"ServerEngines BladeEngine 2 Open iSCSI Driver"
bcm5700
eth
"Broadcom BCM5700 10/100/1000 ethernet adapter"
line_speed "Line speed" "1[0]+"
bfa
eth
"Brocade Fibre Channel to PCIe Host Bus Adapters (HBAs)"
bna
eth
"Brocade FCoE/CEE to PCIe Converged Network Adapters (CNAs)"
bnx2
eth
"Broadcom NetXtreme II Gigabit Ethernet adapter"
bnx2x
eth
"Broadcom NetXtremeII 10Gb support"
cs89x0
eth
"Crystal SemiconductorCS89[02]0"
cxgb
eth
"Chelsio 10Gb Ethernet adapter"
cxgb3
eth
"Chelsio 10Gb Ethernet adapter"
cxgb4
eth
"Chelsio Terminator4 10G unified wire network controller"
de600
eth
"D-Link DE-600 Ethernet pocket adapter"
de620
eth
"D-Link DE-620 Ethernet pocket adapter"
dl2k
eth
"D-Link DL2000-based Gigabit Ethernet Adapter"
#dlci
#dlci
#"RFC 1490 Frame Relay protocol"
dmfe
eth
"Davicom DM9102(A)/DM9132/DM9801 fast ethernet"
dummy
dummy
"Placeholder device for intermittent links"
e100
eth
"Intel EtherExpress/100 driver"
e1000
eth
"Intel EtherExpress/1000 gigabit"
e1000e
eth
"Intel 82566DC-2 Gigabit Network Connection"
eepro
eth
"EtherExpress Pro/10"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
eepro100
eth
"Intel EtherExpress Pro 100B"
eexpress
eth
"EtherExpress"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
ehea
eth
"IBM eServer HEA Driver"
epic100
eth
"SMC 83c170 EPIC/100"
eql
eql
"Load balancing for point-to-point network interfaces"
es3210
eth
"Racal-Interlan ES3210 EISA"
eth16i
eth
"ICL EtherTeam 16i/32 EISA"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
ewrk3
eth
"EtherWORKS 3: DE203, DE204, DE205"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
fealnx
eth
"Myson MTD-8xx 100/10M Ethernet PCI Adapter"
forcedeth
eth
"nForce Ethernet Driver"
fmv18x
eth
"Fujitsu FMV-181/182/183/184"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
hamachi
eth
"A Packet Engines GNIC-II Gigabit"
hp-plus
eth
"HP PCLAN/plus"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
hp
eth
"HP LAN"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
hp100
eth
"HP10/100VG ANY LAN: J257x, 27248B, J2585"
hp100_port "Base I/O address" "0x[0-9a-fA-F]+"
#hydra
# eth
# "Amiga Linux/m68k Hydra"
ibmtr
tr
"Shared-memory IBM Token Ring 16/4"
io "Base I/O address" "0x[0-9a-fA-F]+"
igb
eth
"Intel 82575EB Gigabit Network/Backplane Connection"
igbvf
eth
"Intel 82576 Virtual Function"
ixgb
eth
"Intel PRO/10GbE"
ixgbe
eth
"Intel 10 Gigabit PCI Express"
lance
eth
"AT1500, HP J2405A, most NE2100/clone"
# NOT YET MODULARIZED!
#lance32
# eth
# "AMD PCnet32, PCnetPCI"
lne390
eth
"Mylex LNE390 EISA"
natsemi
eth
"NatSemi DP83815 Fast Ethernet"
mlx4_core
eth
"Mellanox ConnectX mt26448 10Gb/s low-level driver"
mlx4_en
eth
"Mellanox ConnectX mt26448 10Gb/s Ethernet Driver"
mlx4_ib
eth
"Mellanox ConnectX mt26448 10Gb/s InfiniBand driver"
myri_sbus
eth
"MyriCOM MyriNET SBUS"
ne
eth
"NE1000, NE2000, and compatible"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
ne2k-pci
eth
"PCI NE2000 clones"
ne3210
eth
"Novell NE3210 EISA"
netxen_nic
eth
"NetXen Multi port (1/10) Gigabit Network Driver"
ni5010
eth
"MiCom-Interlan NI5010"
ni65
eth
"NI6510 Ethernet"
ns83820
eth
"Natsemi 83820 gigabit"
olympic
tr
"IBM Olympic-based PCI roken ring"
pcnet32
eth
"AMD PCnet32"
enic
eth
"Cisco 10G Ethernet NIC driver"
fnic
eth
"Cisco FCoE HBA driver"
# not modularized
#pi2
#ppp
# ppp
# "Point-to-Point Protocol"
# NOT YET MODULARIZED!
#pt
qlge
eth
"QLogic 8xxx Ethernet"
qla3xxx
eth
"Qlogic 3xxx"
qlcnic
eth
"QLogic Corp cLOM8214 1/10GbE Controller"
8139too
eth
"RTL8139, SMC EZ Card Fast Ethernet"
8139cp
eth
"RTL8139, SMC EZ Card Fast Ethernet"
r8169
eth
"RTL8169 Gigabit Ethernet"
s2io
eth
"S2IO 10GbE"
sis190
eth
"SiS sis190 Gigabit Ethernet"
sis900
eth
"SiS 900/7016 PCI Fast Ethernet"
sk98lin
eth
"SysKonnect SK-98xx Gigabit"
skfp
eth
"SysKonnect SK-55xx/SK-58xx FDDI"
skge
eth
"SysKonnect Gigabit Ethernet"
sky2
eth
"Marvell Yukon 2 Gigabit Ethernet"
niu
eth
"Enables Sun Multithreaded 10G Ethernet Networking"
sdla
sdla
"Sangoma S502/S508"
# NOT YET MODULARIZED!
#seeq8005
# What's a seeq8005, anyway? From the comments in the file:
# "seeq8005.c: A network driver for linux." No, really!
# NOT YET MODULARIZED!
#sk_g16
# eth
# "Schneider & Koch (SK) G16"
sktr
tr
"SysKonnect Token Ring ISA/PCI"
# slhc is never loaded explicitly, only by dependencies
#slip
# sl
# "Serial Link Internet Protocol"
strip
strip_proto
"Starmode Radio IP"
sunlance
eth
"Linux/Sparc/Lance Ethernet"
sunbmac
eth
"Sun BigMac Ethernet"
starfire
eth
"Adaptec Starfire"
sundance
eth
"Sundance ST201 Alta"
sunhme
eth
"Sun Happy Meal Ethernet"
sunqe
eth
"Sun Quad Ethernet"
tg3
eth
"Broadcom Tigon3 Ethernet"
tlan
eth
"ThunderLAN"
tulip
eth
"DEC 21040, most 21*40 Ethernet"
io "Base I/O address" "0x[0-9a-fA-F]+"
tulip_old
eth
"Older DEC 21040, most 21*40 Ethernet"
io "Base I/O address" "0x[0-9a-fA-F]+"
tmspci
tr
"TMS380-based PCI token ring cards"
typhoon
eth
"3Com Typhoon Family (3C990, 3CR990 and variants)"
lanstreamer
tr
"IBM Auto LANStreamer"
abyss
tr
"Madge Smart 16/4 PCI Mk2 token ring"
via-rhine
eth
"VIA VT86c100A Rhine-II PCI"
via-velocity
eth
"VIA Velocity Gigabit Ethernet"
wavelan
eth
"AT&T GIS WaveLAN transceiver"
io "Base I/O address" "0x[0-9a-fA-F]+"
irq "IRQ level" "[0-9]+"
wic
wic
"parallel port network driver"
winbond-840
eth
"Compex RL100ATX-PCI"
yellowfin
eth
"Packet Engines G-NIC PCI Gigabit"
# S/390 stuff
netiucv
eth
"S/390 Inter-User Communication Vehicle (iucv)"
ctc
eth
"S/390 Channel to Channel"
qeth
eth
"S/390 OSA-Express, Hipersocket"
lcs
eth
"S/390 LCS, non-QDIO Token Ring"
# iSeries
veth
eth
"iSeries Virtual Ethernet"
iseries_veth
eth
"iSeries Virtual Ethernet"
viodasd
scsi_hostadapter
"iSeries Virtual DASD"
# pSeries
ibmveth
eth
"Power5 Virtual Ethernet"
ibmvscsic
scsi_hostadapter
"Power5 Virtual SCSI"
# Cell
mambonet
eth
"IBM Cell Virtual Ethernet"
spidernet
eth
"IBM Cell Blade Ethernet"
# Mac stuff
bmac
eth
"Apple BMAC/BMAC+"
mace
eth
"Apple MACE"
sungem
eth
"Apple GMAC"
airport
eth
"Apple Airport"
# NOT YET MODULARIZED!
#znet
# eth
# drivers/scsi directory
# XXX this needs to be put back
#53c7,8xx
#scsi_hostadapter
#"Symbios/NCR 53c700 and 53c800 series"
3w-xxxx
scsi_hostadapter
"3ware Storage Controller"
3w-9xxx
scsi_hostadapter
"3ware 9000 Series Storage Controller"
3w-sas
scsi_hostadapter
"LSI 3ware 97xx SAS/SATA RAID Controller"
AM53C974
scsi_hostadapter
"AM53/79C974 (PCscsi) driver"
BusLogic
scsi_hostadapter
"BusLogic MultiMaster SCSI"
a100u2w
scsi_hostadapter
"Initio A100U2W SCSI"
aacraid
scsi_hostadapter
"Adaptec AACRAID"
aic94xx
scsi_hostadapter
"Adaptec aic94xx SCSI Host Bus Adapter driver"
advansys
scsi_hostadapter
"Advansys"
aha152x
scsi_hostadapter
"Adaptec AHA-152x"
aha152x "ioport, irq, host scsiid"
ahci
scsi_hostadapter
"Advanced Host Controller Interface SATA"
aic7xxx
scsi_hostadapter
"Adaptec AHA-2740, 28xx, 29xx, 39xx"
aic79xx
scsi_hostadapter
"Adaptec Aic79xx SCSI Host Bus Adapter driver"
arcmsr
scsi_hostadapter
"ARECA (ARC11xx/12xx) SATA RAID Host Adapter"
ata_piix
scsi_hostadapter
"Intel PIIX/ICH ATA controllers"
atp870u
scsi_hostadapter
"ACARD ATP870U PCI scsi controller"
cciss
scsi_hostadapter
"Compaq Smart Array 5xxx Controller"
cpqarray
scsi_hostadapter
"Compaq Smart/2 RAID Controller"
DAC960
scsi_hostadapter
"Mylex DAC960 RAID Controller"
dpt_i2o
scsi_hostadapter
"Adaptec I2O RAID Driver"
fcal
scsi_hostadapter
"Sun Enterprise Network Array (FC-AL)"
gdth
scsi_hostadapter
"ICP RAID Controller"
hptiop
scsi_hostadapter
"HighPoint RocketRAID SATA Controller"
# not a module
# gvp11
i2o_block
scsi
"I2O Block driver"
ibmvfc
scsi_hostadapter
"Power6 Virtual FC"
ipr
scsi_hostadapter
"IBM iSeries/pSeries native storage"
ips
scsi_hostadapter
"IBM ServeRAID"
lpfc
scsi_hostadapter
"Emulex OneConnect UCNA / LightPulse Fibre Channel driver"
megaraid
scsi_hostadapter
"LSI MegaRAID Controllers"
megaraid_mbox
scsi_hostadapter
"LSI MegaRAID Controllers"
megaraid_sas
scsi_hostadapter
"LSI MegaRAID Controllers"
mptbase
scsi_hostadapter
"LSI Logic Fusion MPT Base Driver"
mptctl
scsi_hostadapter
"LSI Logic Fusion MPT Misc Driver"
mptfc
scsi_hostadapter
"LSI Logic Fusion MPT FC Host Driver"
mptspi
scsi_hostadapter
"LSI Logic Fusion MPT SPI Host Driver"
mptsas
scsi_hostadapter
"LSI Logic Fusion MPT SAS Host Driver"
mpt2sas
scsi_hostadapter
"LSI MPT Fusion SAS 2.0 Device Driver"
mvsas
scsi_hostadapter
"Marvell RAID bus controller MV64460/64461/64462"
ncr53c8xx
scsi_hostadapter
"Symbios/NCR 53C8xx"
pluto
scsi_hostadapter
"SparcSTORAGE Array"
pcd
block-major-46 cdrom
"Parallel-port IDE CDROM"
pmcraid
scsi_hostadapter
"PMC Sierra MaxRAID Controller Adapters"
qla1280
scsi_hostadapter
"Qlogic 1280/12160"
qla2xxx
scsi_hostadapter
"QLogic 2xxx"
qla2x00
scsi_hostadapter
"Qlogic 2x00"
qla2100
scsi_hostadapter
"Qlogic 2100"
qla2200
scsi_hostadapter
"Qlogic 2200"
qla2300
scsi_hostadapter
"Qlogic 2300"
qla2400
scsi_hostadapter
"Qlogic 2400"
qla2322
scsi_hostadapter
"Qlogic 2322"
qla4xxx
scsi_hostadapter
"Qlogic 4xxx"
qla6312
scsi_hostadapter
"Qlogic 6312"
qla6322
scsi_hostadapter
"Qlogic 6322"
qlogicisp
scsi_hostadapter
"QLogic ISP1020 SCSI"
qlogicpti
scsi_hostadapter
"QLogic ISP1020 SCSI SBUS"
rpadlpar_io
scsi_hostadapter
"IBM Dynamic Logical Partition I/O controller"
pata_marvell
scsi_hostadapter
"Marvell PATA controllers"
pata_pdc2027x
scsi_hostadapter
"Promise PATA controllers"
pata_sis
scsi_hostadapter
"Pilicon Image PATA controllers"
sata_inic162x
scsi_hostadapter
"Initio 162x SATA controllers"
sata_mv
scsi_hostadapter
"Marvell SATA controllers"
sata_nv
scsi_hostadapter
"nVidia nForce SATA controllers"
sata_promise
scsi_hostadapter
"Promise SATA controllers"
sata_qstor
scsi_hostadapter
"QStor SATA controllers"
sata_sil
scsi_hostadapter
"Silicon Image SATA controllers"
sata_sil24
scsi_hostadapter
"Silicon Image 3124/3132 SATA controllers"
sata_sis
scsi_hostadapter
"SIS SATA controllers"
sata_svw
scsi_hostadapter
"K2 SATA controllers"
sata_sx4
scsi_hostadapter
"Promise SX4 SATA controllers"
sata_uli
scsi_hostadapter
"ULi SATA controllers"
sata_via
scsi_hostadapter
"VIA SATA controllers"
sata_vsc
scsi_hostadapter
"VSC7174 SATA controllers"
siimage
scsi_hostadapter
"Silicon Image SATA controllers"
stex
scsi_hostadapter
"Promise SuperTrak EX"
sx8
scsi_hostadapter
"Promise SATA SX8 block driver"
# needed for sparc
sym53c8xx
scsi_hostadapter
"Symbios 53C896"
sym53c8xx_2
scsi_hostadapter
"Alternate Symbios 53C896 Driver"
tcmscsim
scsi_hostadapter
"Tekram DC390 and other AMD53C974A based PCI SCSI adapters"
# drivers/cdrom
aztcd
block-major-29 cdrom
"Aztech CD268 CDROM"
aztcd "Base I/O Address"
cdu31a
block-major-15 cdrom
"Sony CDU-31A CDROM"
cdu31a_port "Base I/O Address"
cdu31a_irq "IRQ"
cm206
block-major-32 cdrom
"Philips/LMS cm20 CDROM"
cm206 "Base I/O address, irq"
gscd
block-major-16 cdrom
"GoldStar R420 CDROM"
gscd "Base I/O Address"
isp16
# module, but dynamic block number so kerneld can't request it... (?)
unknown cdrom
"ISP16/MAD16/Mozart soundcard-based CDROM"
isp16_cdrom_base "Base I/O Address"
isp16_cdrom_irq "IRQ"
isp16_cdrom_dma "DMA Channel (0,3,5,6,7)"
mcd
block-major-23 cdrom
"Mitsumi CDROM"
mcd "Base I/O Address,irq"
mcdx
block-major-20 cdrom
"Mitsumi XA/Multisession CDROM"
mcdx "Base I/O Address,irq"
optcd
block-major-17 cdrom
"Optics Storage 8000 AT CDROM"
sbpcd
block-major-25 cdrom
"SoundBlaster Pro/Panasonic CDROM"
sbpcd "Base I/O Address"
sjcd
block-major-18 cdrom
"Sanyo CD-ROM device driver"
sjcd_base "Base I/O Address"
sonycd535
block-major-24 cdrom
"Sony CDU-535 CDROM"
sonycd535 "Base I/O Address"
agpart
video
"Intel i810 Graphics Controller"
# drivers/ieee1394
sbp2
scsi_hostadapter
"IEEE-1394 SBP-2 protocol driver"
# drivers/usb
usb-storage
scsi_hostadapter
"USB Mass Storage driver for Linux"
# pcmcia
3c574_cs
eth
"3Com 3c574 series PCMCIA ethernet driver"
3c589_cs
eth
"3Com 3c589 series PCMCIA ethernet driver"
axnet_cs
eth
"Asix AX88190 PCMCIA ethernet driver"
fmvj18x_cs
eth
"fmvj18x and compatible PCMCIA ethernet driver"
nmclan_cs
eth
"New Media PCMCIA ethernet driver"
pcnet_cs
eth
"NE2000 compatible PCMCIA ethernet driver"
smc91c92_cs
eth
"SMC 91c92 series PCMCIA ethernet driver"
xirc2ps_cs
eth
"Xircom PCMCIA ethernet driver"
xircom_cb
eth
"Xircom Cardbus ethernet driver"
aha152x_cs
scsi_hostadapter
"Adaptec AHA152x-compatible PCMCIA SCSI driver"
fdomain_cs
scsi_hostadapter
"Future Domain PCMCIA SCSI driver"
qlogic_cs
scsi_hostadapter
"Qlogic PCMCIA SCSI driver"
ide-cs
ide
"PCMCIA IDE driver"
# pcmcia host controllers
yenta_socket
pcmcia
"Cardbus PCMCIA Controller"
i82365
pcmcia
"i82365 PCMCIA socket driver"
tcic
pcmcia
"Databook TCIC-2 PCMCIA socket driver"
# usb
asix
eth
"DLink DUB-E100 USB Ethernet"
catc
eth
"CATC EL1210A NetMate USB Ethernet driver"
kaweth
eth
"KL5USB101 USB Ethernet driver"
pegasus
eth
"Pegasus/Pegasus II USB Ethernet driver"
rtl8150
eth
"rtl8150-based USB Ethernet driver"
usbnet
eth
"USB Host-to-Host Link Driver"
# wireless
airo_cs
eth
"Aironet 802.11 PCMCIA wireless ethernet"
airo
eth
"Aironet 802.11 wireless ethernet"
atmel_cs
eth
"Atmel at76c50x 802.11 PCMCIA wireless ethernet"
atmel_pci
eth
"Atmel at76c50x 802.11 wireless ethernet"
netwave_cs
eth
"Netwave AirSurfer Wireless"
orinoco_cs
eth
"Orinoco, Prism II and similar PCMCIA wireless ethernet"
orinoco_nortel
eth
"Orinoco wireless ethernet using Nortel PCI bridge"
orinoco_pci
eth
"Orinoco, Prism II and similar wireless ethernet"
orinoco_plx
eth
"Orinoco, Prism II and similar wireless ethernet"
orinoco_tmd
eth
"Orinoco, Prism II and similar wireless ethernet"
prism54
eth
"Intersil Prism54"
wavelan_cs
eth
"WaveLAN PCMCIA wireless ethernet"
wl3501_cs
eth
"Planet wl3501 PCMCIA wirelesss ethernet"
xenblk
scsi_hostadapter
"Xen block frontend device"
xennet
eth
"Xen network frontend device"
virtio_blk
scsi_hostadapter
"Virtio block driver"
virtio_net
eth
"Virtio network driver"
# vim: noexpandtab