Stacks Ü
   ßßßßßßß

 Supports the dynamic use of data stacks to handle hardware interrupts.
 You can use this command only in your CONFIG.SYS file.

 Syntax:  STACKS=n,s

   n  Specifies the number of stacks.  Valid values for n are 0 and numbers
      n the range 8 through 64.

   s  Specifies the size (in bytes) of each stack.  Valid values for s are
      0 and numbers in the range 32 through 512.


 Default settings
 The default setting for the stacks command are 0,0 for IBM PC,
 PC/XT, and IBM PC-Portable; and 9,128 for other systems.

 Special cases for stack allocation
 Upon receiving a hardware interrupt, FreeDOS allocates one stack from
 the specified number.  If the values for n and s are 0, each running
 program must have enough stack space for hardware interrupt drivers.  If
 your computer becomes unstable, use the defaults.

 Example:
 To allocate 8 stacks of 512 bytes each for hardware-interrupt handling,
 add the following line to your CONFIG.SYS file:

   stacks=8,512