/*
* Copyright 2005-2016 The OpenChrome Project
* [https://www.freedesktop.org/wiki/Openchrome]
* Copyright 2004-2005 The Unichrome Project [unichrome.sf.net]
* Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved.
* Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
/*
* via_tv.c
*
* Handles the initialization and management of TV output related
* resources.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "via_driver.h"
#include <unistd.h>
static void
viaTVSetDisplaySource(ScrnInfoPtr pScrn, CARD8 displaySource)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
VIAPtr pVia = VIAPTR(pScrn);
CARD8 sr12, sr13, sr5a;
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Entered viaTVSetDisplaySource.\n"));
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
sr5a = hwp->readSeq(hwp, 0x5A);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR5A: 0x%02X\n", sr5a));
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Setting 3C5.5A[0] to 0.\n"));
ViaSeqMask(hwp, 0x5A, sr5a & 0xFE, 0x01);
}
sr12 = hwp->readSeq(hwp, 0x12);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR12: 0x%02X\n", sr12));
sr13 = hwp->readSeq(hwp, 0x13);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR13: 0x%02X\n", sr13));
switch (pVia->Chipset) {
case VIA_CLE266:
/* 3C5.12[5] - FPD18 pin strapping
* 0: DIP0 (Digital Interface Port 0) is used by
* a TMDS transmitter (DVI)
* 1: DIP0 (Digital Interface Port 0) is used by
* a TV encoder */
if (sr12 & 0x20) {
viaDIP0SetDisplaySource(pScrn, displaySource);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"DIP0 was not set up for "
"an external TV encoder use.\n");
}
break;
case VIA_KM400:
case VIA_K8M800:
case VIA_PM800:
case VIA_P4M800PRO:
/* 3C5.13[3] - DVP0D8 pin strapping
* 0: AGP pins are used for AGP
* 1: AGP pins are used by FPDP
* (Flat Panel Display Port)
* 3C5.12[6] - DVP0D6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - DVP0D5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - DVP0D4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20)) {
viaDVP0SetDisplaySource(pScrn, displaySource);
} else if ((sr13 & 0x08) && (!(sr12 & 0x10))) {
viaDFPLowSetDisplaySource(pScrn, displaySource);
} else if (sr13 & 0x08) {
viaDVP1SetDisplaySource(pScrn, displaySource);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"None of the external ports were set up for "
"external TV encoder use.\n");
}
break;
case VIA_P4M890:
case VIA_K8M890:
case VIA_P4M900:
/* 3C5.12[6] - FPD6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - FPD5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - FPD4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20) && (!(sr12 & 0x10))) {
viaDVP0SetDisplaySource(pScrn, displaySource);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Unrecognized external TV encoder use.\n"
"Contact the developer for assistance.\n");
}
break;
case VIA_CX700:
case VIA_VX800:
case VIA_VX855:
case VIA_VX900:
/* 3C5.13[6] - DVP1 DVP / capture port selection
* 0: DVP1 is used as a DVP (Digital Video Port)
* 1: DVP1 is used as a capture port
*/
if (!(sr13 & 0x40)) {
viaDVP1SetDisplaySource(pScrn, displaySource);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"DVP1 is not set up for external TV "
"encoder use.\n");
}
break;
default:
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Unrecognized IGP for "
"an external TV encoder use.\n");
break;
}
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
hwp->writeSeq(hwp, 0x5A, sr5a);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Restoring 3C5.5A[0].\n"));
}
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaTVSetDisplaySource.\n"));
}
static void
viaTVEnableIOPads(ScrnInfoPtr pScrn, CARD8 ioPadState)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
VIAPtr pVia = VIAPTR(pScrn);
CARD8 sr12, sr13, sr5a;
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Entered viaTVEnableIOPads.\n"));
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
sr5a = hwp->readSeq(hwp, 0x5A);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR5A: 0x%02X\n", sr5a));
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Setting 3C5.5A[0] to 0.\n"));
ViaSeqMask(hwp, 0x5A, sr5a & 0xFE, 0x01);
}
sr12 = hwp->readSeq(hwp, 0x12);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR12: 0x%02X\n", sr12));
sr13 = hwp->readSeq(hwp, 0x13);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR13: 0x%02X\n", sr13));
switch (pVia->Chipset) {
case VIA_CLE266:
/* 3C5.12[5] - FPD18 pin strapping
* 0: DIP0 (Digital Interface Port 0) is used by
* a TMDS transmitter (DVI)
* 1: DIP0 (Digital Interface Port 0) is used by
* a TV encoder */
if (sr12 & 0x20) {
viaDIP0EnableIOPads(pScrn, ioPadState);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"DIP0 is not set up for "
"an external TV encoder use.\n");
}
break;
case VIA_KM400:
case VIA_K8M800:
case VIA_PM800:
case VIA_P4M800PRO:
/* 3C5.13[3] - DVP0D8 pin strapping
* 0: AGP pins are used for AGP
* 1: AGP pins are used by FPDP
* (Flat Panel Display Port)
* 3C5.12[6] - DVP0D6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - DVP0D5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - DVP0D4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20)) {
viaDVP0EnableIOPads(pScrn, ioPadState);
} else if ((sr13 & 0x08) && (!(sr12 & 0x10))) {
viaDFPLowEnableIOPads(pScrn, ioPadState);
} else if (sr13 & 0x08) {
viaDVP1EnableIOPads(pScrn, ioPadState);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"None of the external ports were set up for "
"external TV encoder use.\n");
}
break;
case VIA_P4M890:
case VIA_K8M890:
case VIA_P4M900:
/* 3C5.12[6] - FPD6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - FPD5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - FPD4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20) && (!(sr12 & 0x10))) {
viaDVP0EnableIOPads(pScrn, ioPadState);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Unrecognized external TV encoder use.\n"
"Contact the developer for assistance.\n");
}
break;
case VIA_CX700:
case VIA_VX800:
case VIA_VX855:
case VIA_VX900:
/* 3C5.13[6] - DVP1 DVP / capture port selection
* 0: DVP1 is used as a DVP (Digital Video Port)
* 1: DVP1 is used as a capture port
*/
if (!(sr13 & 0x40)) {
viaDVP1EnableIOPads(pScrn, ioPadState);
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"DVP1 is not set up for external TV "
"encoder use.\n");
}
break;
default:
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Unrecognized IGP for "
"an external TV encoder use.\n");
break;
}
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
hwp->writeSeq(hwp, 0x5A, sr5a);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Restoring 3C5.5A[0].\n"));
}
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaTVEnableIOPads.\n"));
}
static void
viaTVSetClockDriveStrength(ScrnInfoPtr pScrn, CARD8 clockDriveStrength)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
VIAPtr pVia = VIAPTR(pScrn);
CARD8 sr12, sr13, sr5a;
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Entered viaTVSetClockDriveStrength.\n"));
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
sr5a = hwp->readSeq(hwp, 0x5A);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR5A: 0x%02X\n", sr5a));
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Setting 3C5.5A[0] to 0.\n"));
ViaSeqMask(hwp, 0x5A, sr5a & 0xFE, 0x01);
}
sr12 = hwp->readSeq(hwp, 0x12);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR12: 0x%02X\n", sr12));
sr13 = hwp->readSeq(hwp, 0x13);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR13: 0x%02X\n", sr13));
switch (pVia->Chipset) {
case VIA_CLE266:
/* 3C5.12[5] - FPD18 pin strapping
* 0: DIP0 (Digital Interface Port 0) is used by
* a TMDS transmitter (DVI)
* 1: DIP0 (Digital Interface Port 0) is used by
* a TV encoder */
if (sr12 & 0x20) {
viaDIP0SetClockDriveStrength(pScrn, clockDriveStrength);
}
break;
case VIA_KM400:
case VIA_K8M800:
case VIA_PM800:
case VIA_P4M800PRO:
/* 3C5.13[3] - DVP0D8 pin strapping
* 0: AGP pins are used for AGP
* 1: AGP pins are used by FPDP
* (Flat Panel Display Port)
* 3C5.12[6] - DVP0D6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - DVP0D5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - DVP0D4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20)) {
viaDVP0SetClockDriveStrength(pScrn, clockDriveStrength);
} else if ((sr13 & 0x08) && (!(sr12 & 0x10))) {
} else if (sr13 & 0x08) {
viaDVP1SetClockDriveStrength(pScrn, clockDriveStrength);
}
break;
case VIA_P4M890:
case VIA_K8M890:
case VIA_P4M900:
/* 3C5.12[6] - FPD6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - FPD5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - FPD4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20) && (!(sr12 & 0x10))) {
viaDVP0SetClockDriveStrength(pScrn, clockDriveStrength);
}
break;
case VIA_CX700:
case VIA_VX800:
case VIA_VX855:
case VIA_VX900:
/* 3C5.13[6] - DVP1 DVP / capture port selection
* 0: DVP1 is used as a DVP (Digital Video Port)
* 1: DVP1 is used as a capture port */
if (!(sr13 & 0x40)) {
viaDVP1SetClockDriveStrength(pScrn, clockDriveStrength);
}
break;
default:
break;
}
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
hwp->writeSeq(hwp, 0x5A, sr5a);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Restoring 3C5.5A[0].\n"));
}
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaTVSetClockDriveStrength.\n"));
}
static void
viaTVSetDataDriveStrength(ScrnInfoPtr pScrn, CARD8 dataDriveStrength)
{
vgaHWPtr hwp = VGAHWPTR(pScrn);
VIAPtr pVia = VIAPTR(pScrn);
CARD8 sr12, sr13, sr5a;
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Entered viaTVSetDataDriveStrength.\n"));
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
sr5a = hwp->readSeq(hwp, 0x5A);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR5A: 0x%02X\n", sr5a));
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Setting 3C5.5A[0] to 0.\n"));
ViaSeqMask(hwp, 0x5A, sr5a & 0xFE, 0x01);
}
sr12 = hwp->readSeq(hwp, 0x12);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR12: 0x%02X\n", sr12));
sr13 = hwp->readSeq(hwp, 0x13);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"SR13: 0x%02X\n", sr13));
switch (pVia->Chipset) {
case VIA_CLE266:
/* 3C5.12[5] - FPD18 pin strapping
* 0: DIP0 (Digital Interface Port 0) is used by
* a TMDS transmitter (DVI)
* 1: DIP0 (Digital Interface Port 0) is used by
* a TV encoder */
if (sr12 & 0x20) {
viaDIP0SetDataDriveStrength(pScrn, dataDriveStrength);
}
break;
case VIA_KM400:
case VIA_K8M800:
case VIA_PM800:
case VIA_P4M800PRO:
/* 3C5.13[3] - DVP0D8 pin strapping
* 0: AGP pins are used for AGP
* 1: AGP pins are used by FPDP
* (Flat Panel Display Port)
* 3C5.12[6] - DVP0D6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - DVP0D5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - DVP0D4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20)) {
viaDVP0SetDataDriveStrength(pScrn, dataDriveStrength);
} else if ((sr13 & 0x08) && (!(sr12 & 0x10))) {
} else if (sr13 & 0x08) {
viaDVP1SetDataDriveStrength(pScrn, dataDriveStrength);
}
break;
case VIA_P4M890:
case VIA_K8M890:
case VIA_P4M900:
/* 3C5.12[6] - FPD6 pin strapping
* 0: Disable DVP0 (Digital Video Port 0)
* 1: Enable DVP0 (Digital Video Port 0)
* 3C5.12[5] - FPD5 pin strapping
* 0: DVP0 is used by a TMDS transmitter (DVI)
* 1: DVP0 is used by a TV encoder
* 3C5.12[4] - FPD4 pin strapping
* 0: Dual 12-bit FPDP (Flat Panel Display Port)
* 1: 24-bit FPDP (Flat Panel Display Port) */
if ((sr12 & 0x40) && (sr12 & 0x20) && (!(sr12 & 0x10))) {
viaDVP0SetDataDriveStrength(pScrn, dataDriveStrength);
}
break;
case VIA_CX700:
case VIA_VX800:
case VIA_VX855:
case VIA_VX900:
/* 3C5.13[6] - DVP1 DVP / capture port selection
* 0: DVP1 is used as a DVP (Digital Video Port)
* 1: DVP1 is used as a capture port */
if (!(sr13 & 0x40)) {
viaDVP1SetDataDriveStrength(pScrn, dataDriveStrength);
}
break;
default:
break;
}
if ((pVia->Chipset == VIA_CX700)
|| (pVia->Chipset == VIA_VX800)
|| (pVia->Chipset == VIA_VX855)
|| (pVia->Chipset == VIA_VX900)) {
hwp->writeSeq(hwp, 0x5A, sr5a);
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Restoring 3C5.5A[0].\n"));
}
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting viaTVSetDataDriveStrength.\n"));
}
static void
ViaTVSave(ScrnInfoPtr pScrn)
{
VIABIOSInfoPtr pBIOSInfo = VIAPTR(pScrn)->pBIOSInfo;
if (pBIOSInfo->TVSave)
pBIOSInfo->TVSave(pScrn);
}
static void
ViaTVRestore(ScrnInfoPtr pScrn)
{
VIABIOSInfoPtr pBIOSInfo = VIAPTR(pScrn)->pBIOSInfo;
if (pBIOSInfo->TVRestore)
pBIOSInfo->TVRestore(pScrn);
}
static Bool
ViaTVDACSense(ScrnInfoPtr pScrn)
{
VIABIOSInfoPtr pBIOSInfo = VIAPTR(pScrn)->pBIOSInfo;
if (pBIOSInfo->TVDACSense)
return pBIOSInfo->TVDACSense(pScrn);
return FALSE;
}
static void
ViaTVSetMode(xf86CrtcPtr crtc, DisplayModePtr mode)
{
ScrnInfoPtr pScrn = crtc->scrn;
VIAPtr pVia = VIAPTR(pScrn);
VIABIOSInfoPtr pBIOSInfo = pVia->pBIOSInfo;
if (pBIOSInfo->TVModeI2C)
pBIOSInfo->TVModeI2C(pScrn, mode);
if (pBIOSInfo->TVModeCrtc)
pBIOSInfo->TVModeCrtc(crtc, mode);
/* TV reset. */
xf86I2CWriteByte(pBIOSInfo->TVI2CDev, 0x1D, 0x00);
xf86I2CWriteByte(pBIOSInfo->TVI2CDev, 0x1D, 0x80);
}
static void
ViaTVPower(ScrnInfoPtr pScrn, Bool On)
{
VIABIOSInfoPtr pBIOSInfo = VIAPTR(pScrn)->pBIOSInfo;
#ifdef HAVE_DEBUG
if (On)
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "ViaTVPower: On.\n");
else
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "ViaTVPower: Off.\n");
#endif
if (pBIOSInfo->TVPower)
pBIOSInfo->TVPower(pScrn, On);
}
#ifdef HAVE_DEBUG
void
ViaTVPrintRegs(ScrnInfoPtr pScrn)
{
VIABIOSInfoPtr pBIOSInfo = VIAPTR(pScrn)->pBIOSInfo;
if (pBIOSInfo->TVPrintRegs)
pBIOSInfo->TVPrintRegs(pScrn);
}
#endif /* HAVE_DEBUG */
static void
via_tv_create_resources(xf86OutputPtr output)
{
}
#ifdef RANDR_12_INTERFACE
static Bool
via_tv_set_property(xf86OutputPtr output, Atom property,
RRPropertyValuePtr value)
{
return TRUE;
}
static Bool
via_tv_get_property(xf86OutputPtr output, Atom property)
{
return FALSE;
}
#endif
static void
via_tv_dpms(xf86OutputPtr output, int mode)
{
ScrnInfoPtr pScrn = output->scrn;
switch (mode) {
case DPMSModeOn:
ViaTVPower(pScrn, TRUE);
break;
case DPMSModeStandby:
case DPMSModeSuspend:
case DPMSModeOff:
ViaTVPower(pScrn, FALSE);
break;
}
}
static void
via_tv_save(xf86OutputPtr output)
{
ScrnInfoPtr pScrn = output->scrn;
ViaTVSave(pScrn);
}
static void
via_tv_restore(xf86OutputPtr output)
{
ScrnInfoPtr pScrn = output->scrn;
ViaTVRestore(pScrn);
}
static int
via_tv_mode_valid(xf86OutputPtr output, DisplayModePtr pMode)
{
ScrnInfoPtr pScrn = output->scrn;
int ret = MODE_OK;
if (!ViaModeDotClockTranslate(pScrn, pMode))
return MODE_NOCLOCK;
return ret;
}
static Bool
via_tv_mode_fixup(xf86OutputPtr output, DisplayModePtr mode,
DisplayModePtr adjusted_mode)
{
return TRUE;
}
static void
via_tv_prepare(xf86OutputPtr output)
{
via_tv_dpms(output, DPMSModeOff);
}
static void
via_tv_commit(xf86OutputPtr output)
{
via_tv_dpms(output, DPMSModeOn);
}
static void
via_tv_mode_set(xf86OutputPtr output, DisplayModePtr mode,
DisplayModePtr adjusted_mode)
{
ScrnInfoPtr pScrn = output->scrn;
drmmode_crtc_private_ptr iga = output->crtc->driver_private;
VIAPtr pVia = VIAPTR(pScrn);
/* TV on FirstCrtc */
if (output->crtc) {
viaTVSetDisplaySource(pScrn, iga->index ? 0x01 : 0x00);
/* Set I/O pads to automatic on / off mode. */
viaTVEnableIOPads(pScrn, 0x03);
viaTVSetClockDriveStrength(pScrn, 0x03);
viaTVSetDataDriveStrength(pScrn, 0x03);
ViaTVSetMode(output->crtc, adjusted_mode);
}
pVia->FirstInit = FALSE;
}
static xf86OutputStatus
via_tv_detect(xf86OutputPtr output)
{
xf86OutputStatus status = XF86OutputStatusDisconnected;
ScrnInfoPtr pScrn = output->scrn;
if (ViaTVDACSense(pScrn))
status = XF86OutputStatusConnected;
return status;
}
static DisplayModePtr
via_tv_get_modes(xf86OutputPtr output)
{
DisplayModePtr modes = NULL, mode = NULL;
ScrnInfoPtr pScrn = output->scrn;
VIAPtr pVia = VIAPTR(pScrn);
int i;
for (i = 0; i < pVia->pBIOSInfo->TVNumModes; i++) {
mode = xf86DuplicateMode(&pVia->pBIOSInfo->TVModes[i]);
modes = xf86ModesAdd(modes, mode);
}
return modes;
}
static void
via_tv_destroy(xf86OutputPtr output)
{
}
static const xf86OutputFuncsRec via_tv_funcs = {
.create_resources = via_tv_create_resources,
#ifdef RANDR_12_INTERFACE
.set_property = via_tv_set_property,
#endif
#ifdef RANDR_13_INTERFACE
.get_property = via_tv_get_property,
#endif
.dpms = via_tv_dpms,
.save = via_tv_save,
.restore = via_tv_restore,
.mode_valid = via_tv_mode_valid,
.mode_fixup = via_tv_mode_fixup,
.prepare = via_tv_prepare,
.commit = via_tv_commit,
.mode_set = via_tv_mode_set,
.detect = via_tv_detect,
.get_modes = via_tv_get_modes,
.destroy = via_tv_destroy,
};
/*
*
*/
Bool
via_tv_init(ScrnInfoPtr pScrn)
{
VIAPtr pVia = VIAPTR(pScrn);
VIABIOSInfoPtr pBIOSInfo = pVia->pBIOSInfo;
xf86OutputPtr output = NULL;
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Entered via_tv_init.\n"));
/* preset some pBIOSInfo TV related values -- move up */
pBIOSInfo->TVEncoder = VIA_NONETV;
pBIOSInfo->TVI2CDev = NULL;
pBIOSInfo->TVSave = NULL;
pBIOSInfo->TVRestore = NULL;
pBIOSInfo->TVDACSense = NULL;
pBIOSInfo->TVModeValid = NULL;
pBIOSInfo->TVModeI2C = NULL;
pBIOSInfo->TVModeCrtc = NULL;
pBIOSInfo->TVPower = NULL;
pBIOSInfo->TVModes = NULL;
pBIOSInfo->TVPrintRegs = NULL;
pBIOSInfo->LCDPower = NULL;
pBIOSInfo->TVNumRegs = 0;
/*
* On an SK43G (KM400/Ch7011), false positive detections at a VT162x
* chip were observed, so try to detect the Ch7011 first.
*/
if (pVia->pI2CBus2 && xf86I2CProbeAddress(pVia->pI2CBus2, 0xEC))
pBIOSInfo->TVI2CDev = ViaCH7xxxDetect(pScrn, pVia->pI2CBus2, 0xEC);
else if (pVia->pI2CBus2 && xf86I2CProbeAddress(pVia->pI2CBus2, 0x40))
pBIOSInfo->TVI2CDev = ViaVT162xDetect(pScrn, pVia->pI2CBus2, 0x40);
else if (pVia->pI2CBus3 && xf86I2CProbeAddress(pVia->pI2CBus3, 0x40))
pBIOSInfo->TVI2CDev = ViaVT162xDetect(pScrn, pVia->pI2CBus3, 0x40);
else if (pVia->pI2CBus2 && xf86I2CProbeAddress(pVia->pI2CBus2, 0xEA))
pBIOSInfo->TVI2CDev = ViaCH7xxxDetect(pScrn, pVia->pI2CBus2, 0xEA);
else if (pVia->pI2CBus3 && xf86I2CProbeAddress(pVia->pI2CBus3, 0xEA))
pBIOSInfo->TVI2CDev = ViaCH7xxxDetect(pScrn, pVia->pI2CBus3, 0xEA);
if (!pBIOSInfo->TVI2CDev) {
xf86DrvMsg(pScrn->scrnIndex, X_PROBED,
"Did not detect a TV encoder.\n");
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting via_tv_init.\n"));
return FALSE;
}
switch (pBIOSInfo->TVEncoder) {
case VIA_VT1621:
case VIA_VT1622:
case VIA_VT1623:
case VIA_VT1625:
ViaVT162xInit(pScrn);
break;
case VIA_CH7011:
case VIA_CH7019A:
case VIA_CH7019B:
ViaCH7xxxInit(pScrn);
break;
default:
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Was not able to initialize a known TV encoder.\n");
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting via_tv_init.\n"));
return FALSE;
break;
}
if (!pBIOSInfo->TVSave || !pBIOSInfo->TVRestore
|| !pBIOSInfo->TVDACSense || !pBIOSInfo->TVModeValid
|| !pBIOSInfo->TVModeI2C || !pBIOSInfo->TVModeCrtc
|| !pBIOSInfo->TVPower || !pBIOSInfo->TVModes
|| !pBIOSInfo->TVPrintRegs) {
xf86DestroyI2CDevRec(pBIOSInfo->TVI2CDev, TRUE);
pBIOSInfo->TVI2CDev = NULL;
pBIOSInfo->TVOutput = TVOUTPUT_NONE;
pBIOSInfo->TVEncoder = VIA_NONETV;
pBIOSInfo->TVI2CDev = NULL;
pBIOSInfo->TVSave = NULL;
pBIOSInfo->TVRestore = NULL;
pBIOSInfo->TVDACSense = NULL;
pBIOSInfo->TVModeValid = NULL;
pBIOSInfo->TVModeI2C = NULL;
pBIOSInfo->TVModeCrtc = NULL;
pBIOSInfo->TVPower = NULL;
pBIOSInfo->TVModes = NULL;
pBIOSInfo->TVPrintRegs = NULL;
pBIOSInfo->TVNumRegs = 0;
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"TV encoder was not properly initialized.\n");
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting via_tv_init.\n"));
return FALSE;
}
output = xf86OutputCreate(pScrn, &via_tv_funcs, "TV-1");
pVia->FirstInit = TRUE;
if (output) {
/* Allow tv output on both crtcs, set bit 0 and 1. */
output->possible_crtcs = 0x3;
} else {
xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
"Failed to register TV-1.\n");
}
pBIOSInfo->tv = output;
/* Save now */
pBIOSInfo->TVSave(pScrn);
#ifdef HAVE_DEBUG
if (VIAPTR(pScrn)->PrintTVRegs)
pBIOSInfo->TVPrintRegs(pScrn);
#endif
DEBUG(xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Exiting via_tv_init.\n"));
return TRUE;
}